arch/arm/mach-mmp/devices.c

   1 /*
   2  * linux/arch/arm/mach-mmp/devices.c
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <linux/init.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/dma-mapping.h>
  12 #include <linux/delay.h>
  13
  14 #include <asm/irq.h>
  15 #include "irqs.h"
  16 #include "devices.h"
  17 #include "cputype.h"
  18 #include "regs-usb.h"
  19
  20 int __init pxa_register_device(struct pxa_device_desc *desc,
  21                                 void *data, size_t size)
  22 {
  23         struct platform_device *pdev;
  24         struct resource res[2 + MAX_RESOURCE_DMA];
  25         int i, ret = 0, nres = 0;
  26
  27         pdev = platform_device_alloc(desc->drv_name, desc->id);
  28         if (pdev == NULL)
  29                 return -ENOMEM;
  30
  31         pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
  32
  33         memset(res, 0, sizeof(res));
  34
  35         if (desc->start != -1ul && desc->size > 0) {
  36                 res[nres].start = desc->start;
  37                 res[nres].end   = desc->start + desc->size - 1;
  38                 res[nres].flags = IORESOURCE_MEM;
  39                 nres++;
  40         }
  41
  42         if (desc->irq != NO_IRQ) {
  43                 res[nres].start = desc->irq;
  44                 res[nres].end   = desc->irq;
  45                 res[nres].flags = IORESOURCE_IRQ;
  46                 nres++;
  47         }
  48
  49         for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
  50                 if (desc->dma[i] == 0)
  51                         break;
  52
  53                 res[nres].start = desc->dma[i];
  54                 res[nres].end   = desc->dma[i];
  55                 res[nres].flags = IORESOURCE_DMA;
  56         }
  57
  58         ret = platform_device_add_resources(pdev, res, nres);
  59         if (ret) {
  60                 platform_device_put(pdev);
  61                 return ret;
  62         }
  63
  64         if (data && size) {
  65                 ret = platform_device_add_data(pdev, data, size);
  66                 if (ret) {
  67                         platform_device_put(pdev);
  68                         return ret;
  69                 }
  70         }
  71
  72         return platform_device_add(pdev);
  73 }
  74
  75 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
  76 #if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
  77 #if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
  78
  79 /*****************************************************************************
  80  * The registers read/write routines
  81  *****************************************************************************/
  82
  83 static unsigned int u2o_get(void __iomem *base, unsigned int offset)
  84 {
  85         return readl_relaxed(base + offset);
  86 }
  87
  88 static void u2o_set(void __iomem *base, unsigned int offset,
  89                 unsigned int value)
  90 {
  91         u32 reg;
  92
  93         reg = readl_relaxed(base + offset);
  94         reg |= value;
  95         writel_relaxed(reg, base + offset);
  96         readl_relaxed(base + offset);
  97 }
  98
  99 static void u2o_clear(void __iomem *base, unsigned int offset,
 100                 unsigned int value)
 101 {
 102         u32 reg;
 103
 104         reg = readl_relaxed(base + offset);
 105         reg &= ~value;
 106         writel_relaxed(reg, base + offset);
 107         readl_relaxed(base + offset);
 108 }
 109
 110 static void u2o_write(void __iomem *base, unsigned int offset,
 111                 unsigned int value)
 112 {
 113         writel_relaxed(value, base + offset);
 114         readl_relaxed(base + offset);
 115 }
 116
 117
 118 static DEFINE_MUTEX(phy_lock);
 119 static int phy_init_cnt;
 120
 121 static int usb_phy_init_internal(void __iomem *base)
 122 {
 123         int loops;
 124
 125         pr_info("Init usb phy!!!\n");
 126
 127         /* Initialize the USB PHY power */
 128         if (cpu_is_pxa910()) {
 129                 u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
 130                         | (1<<UTMI_CTRL_PU_REF_SHIFT));
 131         }
 132
 133         u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
 134         u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
 135
 136         /* UTMI_PLL settings */
 137         u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
 138                 | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
 139                 | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
 140                 | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
 141
 142         u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
 143                 | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
 144                 | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
 145                 | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
 146
 147         /* UTMI_TX */
 148         u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
 149                 | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
 150                 | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
 151                 | UTMI_TX_AMP_MASK);
 152         u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
 153                 | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
 154                 | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
 155
 156         /* UTMI_RX */
 157         u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
 158                 | UTMI_REG_SQ_LENGTH_MASK);
 159         u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
 160                 | 2<<UTMI_REG_SQ_LENGTH_SHIFT);
 161
 162         /* UTMI_IVREF */
 163         if (cpu_is_pxa168())
 164                 /* fixing Microsoft Altair board interface with NEC hub issue -
 165                  * Set UTMI_IVREF from 0x4a3 to 0x4bf */
 166                 u2o_write(base, UTMI_IVREF, 0x4bf);
 167
 168         /* toggle VCOCAL_START bit of UTMI_PLL */
 169         udelay(200);
 170         u2o_set(base, UTMI_PLL, VCOCAL_START);
 171         udelay(40);
 172         u2o_clear(base, UTMI_PLL, VCOCAL_START);
 173
 174         /* toggle REG_RCAL_START bit of UTMI_TX */
 175         udelay(400);
 176         u2o_set(base, UTMI_TX, REG_RCAL_START);
 177         udelay(40);
 178         u2o_clear(base, UTMI_TX, REG_RCAL_START);
 179         udelay(400);
 180
 181         /* Make sure PHY PLL is ready */
 182         loops = 0;
 183         while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
 184                 mdelay(1);
 185                 loops++;
 186                 if (loops > 100) {
 187                         printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
 188                                 u2o_get(base, UTMI_PLL));
 189                         break;
 190                 }
 191         }
 192
 193         if (cpu_is_pxa168()) {
 194                 u2o_set(base, UTMI_RESERVE, 1 << 5);
 195                 /* Turn on UTMI PHY OTG extension */
 196                 u2o_write(base, UTMI_OTG_ADDON, 1);
 197         }
 198
 199         return 0;
 200 }
 201
 202 static int usb_phy_deinit_internal(void __iomem *base)
 203 {
 204         pr_info("Deinit usb phy!!!\n");
 205
 206         if (cpu_is_pxa168())
 207                 u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
 208
 209         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
 210         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
 211         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
 212         u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
 213         u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
 214
 215         return 0;
 216 }
 217
 218 int pxa_usb_phy_init(void __iomem *phy_reg)
 219 {
 220         mutex_lock(&phy_lock);
 221         if (phy_init_cnt++ == 0)
 222                 usb_phy_init_internal(phy_reg);
 223         mutex_unlock(&phy_lock);
 224         return 0;
 225 }
 226
 227 void pxa_usb_phy_deinit(void __iomem *phy_reg)
 228 {
 229         WARN_ON(phy_init_cnt == 0);
 230
 231         mutex_lock(&phy_lock);
 232         if (--phy_init_cnt == 0)
 233                 usb_phy_deinit_internal(phy_reg);
 234         mutex_unlock(&phy_lock);
 235 }
 236 #endif
 237 #endif
 238 #endif
 239
 240 #if IS_ENABLED(CONFIG_USB_SUPPORT)
 241 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 242
 243 #if IS_ENABLED(CONFIG_PHY_PXA_USB)
 244 struct resource pxa168_usb_phy_resources[] = {
 245         [0] = {
 246                 .start  = PXA168_U2O_PHYBASE,
 247                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 248                 .flags  = IORESOURCE_MEM,
 249         },
 250 };
 251
 252 struct platform_device pxa168_device_usb_phy = {
 253         .name           = "pxa-usb-phy",
 254         .id             = -1,
 255         .resource       = pxa168_usb_phy_resources,
 256         .num_resources  = ARRAY_SIZE(pxa168_usb_phy_resources),
 257         .dev            =  {
 258                 .dma_mask       = &usb_dma_mask,
 259                 .coherent_dma_mask = 0xffffffff,
 260         }
 261 };
 262 #endif /* CONFIG_PHY_PXA_USB */
 263
 264 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 265 struct resource pxa168_u2o_resources[] = {
 266         /* regbase */
 267         [0] = {
 268                 .start  = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
 269                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 270                 .flags  = IORESOURCE_MEM,
 271                 .name   = "capregs",
 272         },
 273         /* phybase */
 274         [1] = {
 275                 .start  = PXA168_U2O_PHYBASE,
 276                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 277                 .flags  = IORESOURCE_MEM,
 278                 .name   = "phyregs",
 279         },
 280         [2] = {
 281                 .start  = IRQ_PXA168_USB1,
 282                 .end    = IRQ_PXA168_USB1,
 283                 .flags  = IORESOURCE_IRQ,
 284         },
 285 };
 286
 287 struct platform_device pxa168_device_u2o = {
 288         .name           = "mv-udc",
 289         .id             = -1,
 290         .resource       = pxa168_u2o_resources,
 291         .num_resources  = ARRAY_SIZE(pxa168_u2o_resources),
 292         .dev            =  {
 293                 .dma_mask       = &usb_dma_mask,
 294                 .coherent_dma_mask = 0xffffffff,
 295         }
 296 };
 297 #endif /* CONFIG_USB_MV_UDC */
 298
 299 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 300 struct resource pxa168_u2oehci_resources[] = {
 301         [0] = {
 302                 .start  = PXA168_U2O_REGBASE,
 303                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 304                 .flags  = IORESOURCE_MEM,
 305         },
 306         [1] = {
 307                 .start  = IRQ_PXA168_USB1,
 308                 .end    = IRQ_PXA168_USB1,
 309                 .flags  = IORESOURCE_IRQ,
 310         },
 311 };
 312
 313 struct platform_device pxa168_device_u2oehci = {
 314         .name           = "pxa-u2oehci",
 315         .id             = -1,
 316         .dev            = {
 317                 .dma_mask               = &usb_dma_mask,
 318                 .coherent_dma_mask      = 0xffffffff,
 319         },
 320
 321         .num_resources  = ARRAY_SIZE(pxa168_u2oehci_resources),
 322         .resource       = pxa168_u2oehci_resources,
 323 };
 324 #endif
 325
 326 #if IS_ENABLED(CONFIG_USB_MV_OTG)
 327 struct resource pxa168_u2ootg_resources[] = {
 328         /* regbase */
 329         [0] = {
 330                 .start  = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
 331                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 332                 .flags  = IORESOURCE_MEM,
 333                 .name   = "capregs",
 334         },
 335         /* phybase */
 336         [1] = {
 337                 .start  = PXA168_U2O_PHYBASE,
 338                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 339                 .flags  = IORESOURCE_MEM,
 340                 .name   = "phyregs",
 341         },
 342         [2] = {
 343                 .start  = IRQ_PXA168_USB1,
 344                 .end    = IRQ_PXA168_USB1,
 345                 .flags  = IORESOURCE_IRQ,
 346         },
 347 };
 348
 349 struct platform_device pxa168_device_u2ootg = {
 350         .name           = "mv-otg",
 351         .id             = -1,
 352         .dev  = {
 353                 .dma_mask          = &usb_dma_mask,
 354                 .coherent_dma_mask = 0xffffffff,
 355         },
 356
 357         .num_resources  = ARRAY_SIZE(pxa168_u2ootg_resources),
 358         .resource      = pxa168_u2ootg_resources,
 359 };
 360 #endif /* CONFIG_USB_MV_OTG */
 361
 362 #endif