arch/arm/mach-omap1/board-palmz71.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-palmz71.c
   3  *
   4  * Modified from board-generic.c
   5  *
   6  * Support for the Palm Zire71 PDA.
   7  *
   8  * Original version : Laurent Gonzalez
   9  *
  10  * Modified for zire71 : Marek Vasut
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  */
  16
  17 #include <linux/delay.h>
  18 #include <linux/gpio.h>
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/notifier.h>
  23 #include <linux/clk.h>
  24 #include <linux/irq.h>
  25 #include <linux/input.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/mtd/mtd.h>
  28 #include <linux/mtd/partitions.h>
  29 #include <linux/mtd/physmap.h>
  30 #include <linux/spi/spi.h>
  31 #include <linux/spi/ads7846.h>
  32
  33 #include <asm/mach-types.h>
  34 #include <asm/mach/arch.h>
  35 #include <asm/mach/map.h>
  36
  37 #include <plat/flash.h>
  38 #include <plat/mux.h>
  39 #include <plat/usb.h>
  40 #include <plat/dma.h>
  41 #include <plat/tc.h>
  42 #include <plat/board.h>
  43 #include <plat/irda.h>
  44 #include <plat/keypad.h>
  45
  46 #include <mach/hardware.h>
  47
  48 #include "common.h"
  49
  50 #define PALMZ71_USBDETECT_GPIO  0
  51 #define PALMZ71_PENIRQ_GPIO     6
  52 #define PALMZ71_MMC_WP_GPIO     8
  53 #define PALMZ71_HDQ_GPIO        11
  54
  55 #define PALMZ71_HOTSYNC_GPIO    OMAP_MPUIO(1)
  56 #define PALMZ71_CABLE_GPIO      OMAP_MPUIO(2)
  57 #define PALMZ71_SLIDER_GPIO     OMAP_MPUIO(3)
  58 #define PALMZ71_MMC_IN_GPIO     OMAP_MPUIO(4)
  59
  60 static const unsigned int palmz71_keymap[] = {
  61         KEY(0, 0, KEY_F1),
  62         KEY(1, 0, KEY_F2),
  63         KEY(2, 0, KEY_F3),
  64         KEY(3, 0, KEY_F4),
  65         KEY(4, 0, KEY_POWER),
  66         KEY(0, 1, KEY_LEFT),
  67         KEY(1, 1, KEY_DOWN),
  68         KEY(2, 1, KEY_UP),
  69         KEY(3, 1, KEY_RIGHT),
  70         KEY(4, 1, KEY_ENTER),
  71         KEY(0, 2, KEY_CAMERA),
  72 };
  73
  74 static const struct matrix_keymap_data palmz71_keymap_data = {
  75         .keymap         = palmz71_keymap,
  76         .keymap_size    = ARRAY_SIZE(palmz71_keymap),
  77 };
  78
  79 static struct omap_kp_platform_data palmz71_kp_data = {
  80         .rows   = 8,
  81         .cols   = 8,
  82         .keymap_data    = &palmz71_keymap_data,
  83         .rep    = true,
  84         .delay  = 80,
  85 };
  86
  87 static struct resource palmz71_kp_resources[] = {
  88         [0] = {
  89                 .start  = INT_KEYBOARD,
  90                 .end    = INT_KEYBOARD,
  91                 .flags  = IORESOURCE_IRQ,
  92         },
  93 };
  94
  95 static struct platform_device palmz71_kp_device = {
  96         .name   = "omap-keypad",
  97         .id     = -1,
  98         .dev    = {
  99                 .platform_data = &palmz71_kp_data,
 100         },
 101         .num_resources  = ARRAY_SIZE(palmz71_kp_resources),
 102         .resource       = palmz71_kp_resources,
 103 };
 104
 105 static struct mtd_partition palmz71_rom_partitions[] = {
 106         /* PalmOS "Small ROM", contains the bootloader and the debugger */
 107         {
 108                 .name           = "smallrom",
 109                 .offset         = 0,
 110                 .size           = 0xa000,
 111                 .mask_flags     = MTD_WRITEABLE,
 112         },
 113         /* PalmOS "Big ROM", a filesystem with all the OS code and data */
 114         {
 115                 .name   = "bigrom",
 116                 .offset = SZ_128K,
 117                 /*
 118                  * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
 119                  * 0x7b0000 bytes in the English-only ("enUS") version.
 120                  */
 121                 .size           = 0x7b0000,
 122                 .mask_flags     = MTD_WRITEABLE,
 123         },
 124 };
 125
 126 static struct physmap_flash_data palmz71_rom_data = {
 127         .width          = 2,
 128         .set_vpp        = omap1_set_vpp,
 129         .parts          = palmz71_rom_partitions,
 130         .nr_parts       = ARRAY_SIZE(palmz71_rom_partitions),
 131 };
 132
 133 static struct resource palmz71_rom_resource = {
 134         .start  = OMAP_CS0_PHYS,
 135         .end    = OMAP_CS0_PHYS + SZ_8M - 1,
 136         .flags  = IORESOURCE_MEM,
 137 };
 138
 139 static struct platform_device palmz71_rom_device = {
 140         .name   = "physmap-flash",
 141         .id     = -1,
 142         .dev = {
 143                 .platform_data = &palmz71_rom_data,
 144         },
 145         .num_resources  = 1,
 146         .resource       = &palmz71_rom_resource,
 147 };
 148
 149 static struct platform_device palmz71_lcd_device = {
 150         .name   = "lcd_palmz71",
 151         .id     = -1,
 152 };
 153
 154 static struct omap_irda_config palmz71_irda_config = {
 155         .transceiver_cap        = IR_SIRMODE,
 156         .rx_channel             = OMAP_DMA_UART3_RX,
 157         .tx_channel             = OMAP_DMA_UART3_TX,
 158         .dest_start             = UART3_THR,
 159         .src_start              = UART3_RHR,
 160         .tx_trigger             = 0,
 161         .rx_trigger             = 0,
 162 };
 163
 164 static struct resource palmz71_irda_resources[] = {
 165         [0] = {
 166                 .start  = INT_UART3,
 167                 .end    = INT_UART3,
 168                 .flags  = IORESOURCE_IRQ,
 169         },
 170 };
 171
 172 static struct platform_device palmz71_irda_device = {
 173         .name   = "omapirda",
 174         .id     = -1,
 175         .dev = {
 176                 .platform_data = &palmz71_irda_config,
 177         },
 178         .num_resources  = ARRAY_SIZE(palmz71_irda_resources),
 179         .resource       = palmz71_irda_resources,
 180 };
 181
 182 static struct platform_device palmz71_spi_device = {
 183         .name   = "spi_palmz71",
 184         .id     = -1,
 185 };
 186
 187 static struct omap_backlight_config palmz71_backlight_config = {
 188         .default_intensity      = 0xa0,
 189 };
 190
 191 static struct platform_device palmz71_backlight_device = {
 192         .name   = "omap-bl",
 193         .id     = -1,
 194         .dev    = {
 195                 .platform_data = &palmz71_backlight_config,
 196         },
 197 };
 198
 199 static struct platform_device *devices[] __initdata = {
 200         &palmz71_rom_device,
 201         &palmz71_kp_device,
 202         &palmz71_lcd_device,
 203         &palmz71_irda_device,
 204         &palmz71_spi_device,
 205         &palmz71_backlight_device,
 206 };
 207
 208 static int
 209 palmz71_get_pendown_state(void)
 210 {
 211         return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
 212 }
 213
 214 static const struct ads7846_platform_data palmz71_ts_info = {
 215         .model                  = 7846,
 216         .vref_delay_usecs       = 100,  /* internal, no capacitor */
 217         .x_plate_ohms           = 419,
 218         .y_plate_ohms           = 486,
 219         .get_pendown_state      = palmz71_get_pendown_state,
 220 };
 221
 222 static struct spi_board_info __initdata palmz71_boardinfo[] = { {
 223         /* MicroWire (bus 2) CS0 has an ads7846e */
 224         .modalias       = "ads7846",
 225         .platform_data  = &palmz71_ts_info,
 226         .max_speed_hz   = 120000        /* max sample rate at 3V */
 227                                 * 26    /* command + data + overhead */,
 228         .bus_num        = 2,
 229         .chip_select    = 0,
 230 } };
 231
 232 static struct omap_usb_config palmz71_usb_config __initdata = {
 233         .register_dev   = 1,    /* Mini-B only receptacle */
 234         .hmc_mode       = 0,
 235         .pins[0]        = 2,
 236 };
 237
 238 static struct omap_lcd_config palmz71_lcd_config __initdata = {
 239         .ctrl_name = "internal",
 240 };
 241
 242 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 243         {OMAP_TAG_LCD,  &palmz71_lcd_config},
 244 };
 245
 246 static irqreturn_t
 247 palmz71_powercable(int irq, void *dev_id)
 248 {
 249         if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
 250                 printk(KERN_INFO "PM: Power cable connected\n");
 251                 irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 252                                  IRQ_TYPE_EDGE_FALLING);
 253         } else {
 254                 printk(KERN_INFO "PM: Power cable disconnected\n");
 255                 irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 256                                  IRQ_TYPE_EDGE_RISING);
 257         }
 258         return IRQ_HANDLED;
 259 }
 260
 261 static void __init
 262 omap_mpu_wdt_mode(int mode)
 263 {
 264         if (mode)
 265                 omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
 266         else {
 267                 omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
 268                 omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
 269         }
 270 }
 271
 272 static void __init
 273 palmz71_gpio_setup(int early)
 274 {
 275         if (early) {
 276                 /* Only set GPIO1 so we have a working serial */
 277                 gpio_direction_output(1, 1);
 278         } else {
 279                 /* Set MMC/SD host WP pin as input */
 280                 if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
 281                         printk(KERN_ERR "Could not reserve WP GPIO!\n");
 282                         return;
 283                 }
 284                 gpio_direction_input(PALMZ71_MMC_WP_GPIO);
 285
 286                 /* Monitor the Power-cable-connected signal */
 287                 if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
 288                         printk(KERN_ERR
 289                                 "Could not reserve cable signal GPIO!\n");
 290                         return;
 291                 }
 292                 gpio_direction_input(PALMZ71_USBDETECT_GPIO);
 293                 if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 294                                 palmz71_powercable, IRQF_SAMPLE_RANDOM,
 295                                 "palmz71-cable", 0))
 296                         printk(KERN_ERR
 297                                         "IRQ request for power cable failed!\n");
 298                 palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
 299         }
 300 }
 301
 302 static void __init
 303 omap_palmz71_init(void)
 304 {
 305         /* mux pins for uarts */
 306         omap_cfg_reg(UART1_TX);
 307         omap_cfg_reg(UART1_RTS);
 308         omap_cfg_reg(UART2_TX);
 309         omap_cfg_reg(UART2_RTS);
 310         omap_cfg_reg(UART3_TX);
 311         omap_cfg_reg(UART3_RX);
 312
 313         palmz71_gpio_setup(1);
 314         omap_mpu_wdt_mode(0);
 315
 316         omap_board_config = palmz71_config;
 317         omap_board_config_size = ARRAY_SIZE(palmz71_config);
 318
 319         platform_add_devices(devices, ARRAY_SIZE(devices));
 320
 321         palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
 322         spi_register_board_info(palmz71_boardinfo,
 323                                 ARRAY_SIZE(palmz71_boardinfo));
 324         omap1_usb_init(&palmz71_usb_config);
 325         omap_serial_init();
 326         omap_register_i2c_bus(1, 100, NULL, 0);
 327         palmz71_gpio_setup(0);
 328 }
 329
 330 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 331         .atag_offset    = 0x100,
 332         .map_io         = omap15xx_map_io,
 333         .init_early     = omap1_init_early,
 334         .reserve        = omap_reserve,
 335         .init_irq       = omap1_init_irq,
 336         .init_machine   = omap_palmz71_init,
 337         .timer          = &omap1_timer,
 338         .restart        = omap1_restart,
 339 MACHINE_END