arch/arm/mach-omap2/board-ldp.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-ldp.c
   3  *
   4  * Copyright (C) 2008 Texas Instruments Inc.
   5  * Nishant Kamat <nskamat@ti.com>
   6  *
   7  * Modified from mach-omap2/board-3430sdp.c
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13 #include <linux/gpio.h>
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/delay.h>
  18 #include <linux/input.h>
  19 #include <linux/input/matrix_keypad.h>
  20 #include <linux/gpio_keys.h>
  21 #include <linux/workqueue.h>
  22 #include <linux/err.h>
  23 #include <linux/clk.h>
  24 #include <linux/spi/spi.h>
  25 #include <linux/regulator/fixed.h>
  26 #include <linux/regulator/machine.h>
  27 #include <linux/i2c/twl.h>
  28 #include <linux/io.h>
  29 #include <linux/smsc911x.h>
  30 #include <linux/mmc/host.h>
  31 #include <linux/usb/phy.h>
  32 #include <linux/platform_data/spi-omap2-mcspi.h>
  33
  34 #include <asm/mach-types.h>
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/map.h>
  37
  38 #include "common.h"
  39 #include "gpmc.h"
  40 #include "gpmc-smsc911x.h"
  41
  42 #include <video/omapdss.h>
  43 #include <video/omap-panel-data.h>
  44
  45 #include "board-flash.h"
  46 #include "mux.h"
  47 #include "hsmmc.h"
  48 #include "control.h"
  49 #include "common-board-devices.h"
  50
  51 #define LDP_SMSC911X_CS         1
  52 #define LDP_SMSC911X_GPIO       152
  53 #define DEBUG_BASE              0x08000000
  54 #define LDP_ETHR_START          DEBUG_BASE
  55
  56 static uint32_t board_keymap[] = {
  57         KEY(0, 0, KEY_1),
  58         KEY(1, 0, KEY_2),
  59         KEY(2, 0, KEY_3),
  60         KEY(0, 1, KEY_4),
  61         KEY(1, 1, KEY_5),
  62         KEY(2, 1, KEY_6),
  63         KEY(3, 1, KEY_F5),
  64         KEY(0, 2, KEY_7),
  65         KEY(1, 2, KEY_8),
  66         KEY(2, 2, KEY_9),
  67         KEY(3, 2, KEY_F6),
  68         KEY(0, 3, KEY_F7),
  69         KEY(1, 3, KEY_0),
  70         KEY(2, 3, KEY_F8),
  71         PERSISTENT_KEY(4, 5),
  72         KEY(4, 4, KEY_VOLUMEUP),
  73         KEY(5, 5, KEY_VOLUMEDOWN),
  74         0
  75 };
  76
  77 static struct matrix_keymap_data board_map_data = {
  78         .keymap                 = board_keymap,
  79         .keymap_size            = ARRAY_SIZE(board_keymap),
  80 };
  81
  82 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
  83         .keymap_data    = &board_map_data,
  84         .rows           = 6,
  85         .cols           = 6,
  86         .rep            = 1,
  87 };
  88
  89 static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
  90         [0] = {
  91                 .code                   = KEY_ENTER,
  92                 .gpio                   = 101,
  93                 .desc                   = "enter sw",
  94                 .active_low             = 1,
  95                 .debounce_interval      = 30,
  96         },
  97         [1] = {
  98                 .code                   = KEY_F1,
  99                 .gpio                   = 102,
 100                 .desc                   = "func 1",
 101                 .active_low             = 1,
 102                 .debounce_interval      = 30,
 103         },
 104         [2] = {
 105                 .code                   = KEY_F2,
 106                 .gpio                   = 103,
 107                 .desc                   = "func 2",
 108                 .active_low             = 1,
 109                 .debounce_interval      = 30,
 110         },
 111         [3] = {
 112                 .code                   = KEY_F3,
 113                 .gpio                   = 104,
 114                 .desc                   = "func 3",
 115                 .active_low             = 1,
 116                 .debounce_interval      = 30,
 117         },
 118         [4] = {
 119                 .code                   = KEY_F4,
 120                 .gpio                   = 105,
 121                 .desc                   = "func 4",
 122                 .active_low             = 1,
 123                 .debounce_interval      = 30,
 124         },
 125         [5] = {
 126                 .code                   = KEY_LEFT,
 127                 .gpio                   = 106,
 128                 .desc                   = "left sw",
 129                 .active_low             = 1,
 130                 .debounce_interval      = 30,
 131         },
 132         [6] = {
 133                 .code                   = KEY_RIGHT,
 134                 .gpio                   = 107,
 135                 .desc                   = "right sw",
 136                 .active_low             = 1,
 137                 .debounce_interval      = 30,
 138         },
 139         [7] = {
 140                 .code                   = KEY_UP,
 141                 .gpio                   = 108,
 142                 .desc                   = "up sw",
 143                 .active_low             = 1,
 144                 .debounce_interval      = 30,
 145         },
 146         [8] = {
 147                 .code                   = KEY_DOWN,
 148                 .gpio                   = 109,
 149                 .desc                   = "down sw",
 150                 .active_low             = 1,
 151                 .debounce_interval      = 30,
 152         },
 153 };
 154
 155 static struct gpio_keys_platform_data ldp_gpio_keys = {
 156         .buttons                = ldp_gpio_keys_buttons,
 157         .nbuttons               = ARRAY_SIZE(ldp_gpio_keys_buttons),
 158         .rep                    = 1,
 159 };
 160
 161 static struct platform_device ldp_gpio_keys_device = {
 162         .name           = "gpio-keys",
 163         .id             = -1,
 164         .dev            = {
 165                 .platform_data  = &ldp_gpio_keys,
 166         },
 167 };
 168
 169 static struct omap_smsc911x_platform_data smsc911x_cfg = {
 170         .cs             = LDP_SMSC911X_CS,
 171         .gpio_irq       = LDP_SMSC911X_GPIO,
 172         .gpio_reset     = -EINVAL,
 173         .flags          = SMSC911X_USE_32BIT,
 174 };
 175
 176 static inline void __init ldp_init_smsc911x(void)
 177 {
 178         gpmc_smsc911x_init(&smsc911x_cfg);
 179 }
 180
 181 /* LCD */
 182
 183 #define LCD_PANEL_RESET_GPIO            55
 184 #define LCD_PANEL_QVGA_GPIO             56
 185
 186 static const struct display_timing ldp_lcd_videomode = {
 187         .pixelclock     = { 0, 5400000, 0 },
 188
 189         .hactive = { 0, 240, 0 },
 190         .hfront_porch = { 0, 3, 0 },
 191         .hback_porch = { 0, 39, 0 },
 192         .hsync_len = { 0, 3, 0 },
 193
 194         .vactive = { 0, 320, 0 },
 195         .vfront_porch = { 0, 2, 0 },
 196         .vback_porch = { 0, 7, 0 },
 197         .vsync_len = { 0, 1, 0 },
 198
 199         .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
 200                 DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 201 };
 202
 203 static struct panel_dpi_platform_data ldp_lcd_pdata = {
 204         .name                   = "lcd",
 205         .source                 = "dpi.0",
 206
 207         .data_lines             = 18,
 208
 209         .display_timing         = &ldp_lcd_videomode,
 210
 211         .enable_gpio            = -1,   /* filled in code */
 212         .backlight_gpio         = -1,   /* filled in code */
 213 };
 214
 215 static struct platform_device ldp_lcd_device = {
 216         .name                   = "panel-dpi",
 217         .id                     = 0,
 218         .dev.platform_data      = &ldp_lcd_pdata,
 219 };
 220
 221 static struct omap_dss_board_info ldp_dss_data = {
 222         .default_display_name = "lcd",
 223 };
 224
 225 static void __init ldp_display_init(void)
 226 {
 227         int r;
 228
 229         static struct gpio gpios[] __initdata = {
 230                 {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
 231                 {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
 232         };
 233
 234         r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
 235         if (r) {
 236                 pr_err("Cannot request LCD GPIOs, error %d\n", r);
 237                 return;
 238         }
 239
 240         omap_display_init(&ldp_dss_data);
 241 }
 242
 243 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 244 {
 245         /* LCD enable GPIO */
 246         ldp_lcd_pdata.enable_gpio = gpio + 7;
 247
 248         /* Backlight enable GPIO */
 249         ldp_lcd_pdata.backlight_gpio = gpio + 15;
 250
 251         return 0;
 252 }
 253
 254 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 255         .setup          = ldp_twl_gpio_setup,
 256 };
 257
 258 static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
 259         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 260 };
 261
 262 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 263 static struct regulator_init_data ldp_vmmc1 = {
 264         .constraints = {
 265                 .min_uV                 = 1850000,
 266                 .max_uV                 = 3150000,
 267                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 268                                         | REGULATOR_MODE_STANDBY,
 269                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 270                                         | REGULATOR_CHANGE_MODE
 271                                         | REGULATOR_CHANGE_STATUS,
 272         },
 273         .num_consumer_supplies  = ARRAY_SIZE(ldp_vmmc1_supply),
 274         .consumer_supplies      = ldp_vmmc1_supply,
 275 };
 276
 277 /* ads7846 on SPI */
 278 static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
 279         REGULATOR_SUPPLY("vcc", "spi1.0"),
 280 };
 281
 282 /* VAUX1 */
 283 static struct regulator_init_data ldp_vaux1 = {
 284         .constraints = {
 285                 .min_uV                 = 3000000,
 286                 .max_uV                 = 3000000,
 287                 .apply_uV               = true,
 288                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 289                                         | REGULATOR_MODE_STANDBY,
 290                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 291                                         | REGULATOR_CHANGE_STATUS,
 292         },
 293         .num_consumer_supplies          = ARRAY_SIZE(ldp_vaux1_supplies),
 294         .consumer_supplies              = ldp_vaux1_supplies,
 295 };
 296
 297 static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
 298         REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
 299         REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
 300         REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
 301 };
 302
 303 static struct regulator_init_data ldp_vpll2 = {
 304         .constraints = {
 305                 .name                   = "VDVI",
 306                 .min_uV                 = 1800000,
 307                 .max_uV                 = 1800000,
 308                 .apply_uV               = true,
 309                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 310                                         | REGULATOR_MODE_STANDBY,
 311                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 312                                         | REGULATOR_CHANGE_STATUS,
 313         },
 314         .num_consumer_supplies  = ARRAY_SIZE(ldp_vpll2_supplies),
 315         .consumer_supplies      = ldp_vpll2_supplies,
 316 };
 317
 318 static struct twl4030_platform_data ldp_twldata = {
 319         /* platform_data for children goes here */
 320         .vmmc1          = &ldp_vmmc1,
 321         .vaux1          = &ldp_vaux1,
 322         .vpll2          = &ldp_vpll2,
 323         .gpio           = &ldp_gpio_data,
 324         .keypad         = &ldp_kp_twl4030_data,
 325 };
 326
 327 static int __init omap_i2c_init(void)
 328 {
 329         omap3_pmic_get_config(&ldp_twldata,
 330                           TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
 331         omap3_pmic_init("twl4030", &ldp_twldata);
 332         omap_register_i2c_bus(2, 400, NULL, 0);
 333         omap_register_i2c_bus(3, 400, NULL, 0);
 334         return 0;
 335 }
 336
 337 static struct omap2_hsmmc_info mmc[] __initdata = {
 338         {
 339                 .mmc            = 1,
 340                 .caps           = MMC_CAP_4_BIT_DATA,
 341                 .gpio_cd        = -EINVAL,
 342                 .gpio_wp        = -EINVAL,
 343         },
 344         {}      /* Terminator */
 345 };
 346
 347 static struct platform_device *ldp_devices[] __initdata = {
 348         &ldp_gpio_keys_device,
 349         &ldp_lcd_device,
 350 };
 351
 352 #ifdef CONFIG_OMAP_MUX
 353 static struct omap_board_mux board_mux[] __initdata = {
 354         { .reg_offset = OMAP_MUX_TERMINATOR },
 355 };
 356 #endif
 357
 358 static struct mtd_partition ldp_nand_partitions[] = {
 359         /* All the partition sizes are listed in terms of NAND block size */
 360         {
 361                 .name           = "X-Loader-NAND",
 362                 .offset         = 0,
 363                 .size           = 4 * (64 * 2048),      /* 512KB, 0x80000 */
 364                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 365         },
 366         {
 367                 .name           = "U-Boot-NAND",
 368                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
 369                 .size           = 10 * (64 * 2048),     /* 1.25MB, 0x140000 */
 370                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 371         },
 372         {
 373                 .name           = "Boot Env-NAND",
 374                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
 375                 .size           = 2 * (64 * 2048),      /* 256KB, 0x40000 */
 376         },
 377         {
 378                 .name           = "Kernel-NAND",
 379                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x0200000*/
 380                 .size           = 240 * (64 * 2048),    /* 30M, 0x1E00000 */
 381         },
 382         {
 383                 .name           = "File System - NAND",
 384                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x2000000 */
 385                 .size           = MTDPART_SIZ_FULL,     /* 96MB, 0x6000000 */
 386         },
 387
 388 };
 389
 390 static struct regulator_consumer_supply dummy_supplies[] = {
 391         REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
 392         REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
 393 };
 394
 395 static void __init omap_ldp_init(void)
 396 {
 397         regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 398         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 399         ldp_init_smsc911x();
 400         omap_i2c_init();
 401         platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 402         omap_ads7846_init(1, 54, 310, NULL);
 403         omap_serial_init();
 404         omap_sdrc_init(NULL, NULL);
 405         usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 406         usb_musb_init(NULL);
 407         board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 408                         0, 0, nand_default_timings);
 409
 410         omap_hsmmc_init(mmc);
 411         ldp_display_init();
 412 }
 413
 414 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 415         .atag_offset    = 0x100,
 416         .reserve        = omap_reserve,
 417         .map_io         = omap3_map_io,
 418         .init_early     = omap3430_init_early,
 419         .init_irq       = omap3_init_irq,
 420         .handle_irq     = omap3_intc_handle_irq,
 421         .init_machine   = omap_ldp_init,
 422         .init_late      = omap3430_init_late,
 423         .init_time      = omap3_sync32k_timer_init,
 424         .restart        = omap3xxx_restart,
 425 MACHINE_END