arch/arm/mach-pxa/Kconfig

   1 if ARCH_PXA
   2
   3 menu "Intel PXA2xx/PXA3xx Implementations"
   4
   5 if PXA3xx
   6
   7 menu "Supported PXA3xx Processor Variants"
   8
   9 config CPU_PXA300
  10         bool "PXA300 (codename Monahans-L)"
  11
  12 config CPU_PXA310
  13         bool "PXA310 (codename Monahans-LV)"
  14         select CPU_PXA300
  15
  16 config CPU_PXA320
  17         bool "PXA320 (codename Monahans-P)"
  18
  19 config CPU_PXA930
  20         bool "PXA930 (codename Tavor-P)"
  21
  22 endmenu
  23
  24 endif
  25
  26 config ARCH_GUMSTIX
  27         bool "Gumstix XScale boards"
  28         help
  29           Say Y here if you intend to run this kernel on a
  30           Gumstix Full Function Minature Computer.
  31
  32 config MACH_GUMSTIX_F
  33         bool "Basix, Connex, ws-200ax, ws-400ax systems"
  34         depends on ARCH_GUMSTIX
  35         select PXA25x
  36
  37 config ARCH_LUBBOCK
  38         bool "Intel DBPXA250 Development Platform"
  39         select PXA25x
  40         select SA1111
  41         select PXA_HAVE_BOARD_IRQS
  42
  43 config MACH_LOGICPD_PXA270
  44         bool "LogicPD PXA270 Card Engine Development Platform"
  45         select PXA27x
  46         select HAVE_PWM
  47         select PXA_HAVE_BOARD_IRQS
  48
  49 config MACH_MAINSTONE
  50         bool "Intel HCDDBBVA0 Development Platform"
  51         select PXA27x
  52         select HAVE_PWM
  53         select PXA_HAVE_BOARD_IRQS
  54
  55 config MACH_MP900C
  56         bool "Nec Mobilepro 900/c"
  57         select PXA25x
  58
  59 config ARCH_PXA_IDP
  60         bool "Accelent Xscale IDP"
  61         select PXA25x
  62
  63 config PXA_SHARPSL
  64         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
  65         select SHARP_SCOOP
  66         select SHARP_PARAM
  67         help
  68           Say Y here if you intend to run this kernel on a
  69           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
  70           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
  71           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
  72           handheld computer.
  73
  74 config CORGI_SSP_DEPRECATED
  75         bool
  76         select PXA_SSP
  77         help
  78           This option will include corgi_ssp.c and corgi_lcd.c
  79           that corgi_ts.c and other legacy drivers (corgi_bl.c
  80           and sharpsl_pm.c) may depend on.
  81
  82 config MACH_POODLE
  83         bool "Enable Sharp SL-5600 (Poodle) Support"
  84         depends on PXA_SHARPSL
  85         select PXA25x
  86         select SHARP_LOCOMO
  87         select PXA_SSP
  88
  89 config MACH_CORGI
  90         bool "Enable Sharp SL-C700 (Corgi) Support"
  91         depends on PXA_SHARPSL
  92         select PXA25x
  93         select PXA_SHARP_C7xx
  94
  95 config MACH_SHEPHERD
  96         bool "Enable Sharp SL-C750 (Shepherd) Support"
  97         depends on PXA_SHARPSL
  98         select PXA25x
  99         select PXA_SHARP_C7xx
 100
 101 config MACH_HUSKY
 102         bool "Enable Sharp SL-C760 (Husky) Support"
 103         depends on PXA_SHARPSL
 104         select PXA25x
 105         select PXA_SHARP_C7xx
 106
 107 config MACH_AKITA
 108         bool "Enable Sharp SL-1000 (Akita) Support"
 109         depends on PXA_SHARPSL
 110         select PXA27x
 111         select PXA_SHARP_Cxx00
 112         select MACH_SPITZ
 113         select I2C
 114         select I2C_PXA
 115
 116 config MACH_SPITZ
 117         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 118         depends on PXA_SHARPSL
 119         select PXA27x
 120         select PXA_SHARP_Cxx00
 121
 122 config MACH_BORZOI
 123         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 124         depends on PXA_SHARPSL
 125         select PXA27x
 126         select PXA_SHARP_Cxx00
 127
 128 config MACH_TOSA
 129         bool "Enable Sharp SL-6000x (Tosa) Support"
 130         depends on PXA_SHARPSL
 131         select PXA25x
 132         select PXA_HAVE_BOARD_IRQS
 133
 134 config ARCH_VIPER
 135         bool "Arcom/Eurotech VIPER SBC"
 136         select PXA25x
 137         select ISA
 138         select I2C_GPIO
 139         select HAVE_PWM
 140         select PXA_HAVE_BOARD_IRQS
 141         select PXA_HAVE_ISA_IRQS
 142
 143 config ARCH_PXA_ESERIES
 144         bool "PXA based Toshiba e-series PDAs"
 145         select PXA25x
 146         select PXA_HAVE_BOARD_IRQS
 147
 148 config MACH_E330
 149         bool "Toshiba e330"
 150         default y
 151         depends on ARCH_PXA_ESERIES
 152         help
 153           Say Y here if you intend to run this kernel on a Toshiba
 154           e330 family PDA.
 155
 156 config MACH_E350
 157         bool "Toshiba e350"
 158         default y
 159         depends on ARCH_PXA_ESERIES
 160         help
 161           Say Y here if you intend to run this kernel on a Toshiba
 162           e350 family PDA.
 163
 164 config MACH_E740
 165         bool "Toshiba e740"
 166         default y
 167         depends on ARCH_PXA_ESERIES
 168         select FB_W100
 169         help
 170           Say Y here if you intend to run this kernel on a Toshiba
 171           e740 family PDA.
 172
 173 config MACH_E750
 174         bool "Toshiba e750"
 175         default y
 176         depends on ARCH_PXA_ESERIES
 177         select FB_W100
 178         help
 179           Say Y here if you intend to run this kernel on a Toshiba
 180           e750 family PDA.
 181
 182 config MACH_E400
 183         bool "Toshiba e400"
 184         default y
 185         depends on ARCH_PXA_ESERIES
 186         help
 187           Say Y here if you intend to run this kernel on a Toshiba
 188           e400 family PDA.
 189
 190 config MACH_E800
 191         bool "Toshiba e800"
 192         default y
 193         depends on ARCH_PXA_ESERIES
 194         select FB_W100
 195         help
 196           Say Y here if you intend to run this kernel on a Toshiba
 197           e800 family PDA.
 198
 199 config TRIZEPS_PXA
 200         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 201
 202 config MACH_TRIZEPS4
 203         bool "Keith und Koep Trizeps4 DIMM-Module"
 204         depends on TRIZEPS_PXA
 205         select TRIZEPS_PCMCIA
 206         select PXA27x
 207
 208 config MACH_TRIZEPS4WL
 209         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 210         depends on TRIZEPS_PXA
 211         select TRIZEPS_PCMCIA
 212         select PXA27x
 213         select PXA_SSP
 214
 215 choice
 216         prompt "Select base board for Trizeps module"
 217         depends on TRIZEPS_PXA
 218
 219 config MACH_TRIZEPS_CONXS
 220         bool "ConXS Eval Board"
 221
 222 config MACH_TRIZEPS_UCONXS
 223         bool "uConXS Eval Board"
 224
 225 config MACH_TRIZEPS_ANY
 226         bool "another Board"
 227
 228 endchoice
 229
 230 config TRIZEPS_PCMCIA
 231         bool
 232         help
 233           Enable PCMCIA support for Trizeps modules
 234
 235 config MACH_EM_X270
 236         bool "CompuLab EM-x270 platform"
 237         select PXA27x
 238
 239 config MACH_COLIBRI
 240         bool "Toradex Colibri PX27x"
 241         select PXA27x
 242
 243 config MACH_ZYLONITE
 244         bool "PXA3xx Development Platform (aka Zylonite)"
 245         select PXA3xx
 246         select PXA_SSP
 247         select HAVE_PWM
 248
 249 config MACH_LITTLETON
 250         bool "PXA3xx Form Factor Platform (aka Littleton)"
 251         select PXA3xx
 252         select PXA_SSP
 253
 254 config MACH_TAVOREVB
 255         bool "PXA930 Evaluation Board (aka TavorEVB)"
 256         select PXA3xx
 257         select PXA930
 258
 259 config MACH_SAAR
 260         bool "PXA930 Handheld Platform (aka SAAR)"
 261         select PXA3xx
 262         select PXA930
 263
 264 config MACH_ARMCORE
 265         bool "CompuLab CM-X255/CM-X270 modules"
 266         select PXA27x
 267         select IWMMXT
 268         select PXA25x
 269         select PXA_SSP
 270
 271 config MACH_CM_X300
 272         bool "CompuLab CM-X300 modules"
 273         select PXA3xx
 274         select CPU_PXA300
 275
 276 config MACH_MAGICIAN
 277         bool "Enable HTC Magician Support"
 278         select PXA27x
 279         select IWMMXT
 280         select PXA_HAVE_BOARD_IRQS
 281
 282 config MACH_MIOA701
 283         bool "Mitac Mio A701 Support"
 284         select PXA27x
 285         select IWMMXT
 286         select LEDS_GPIO
 287         select HAVE_PWM
 288         select GPIO_SYSFS
 289         help
 290           Say Y here if you intend to run this kernel on a
 291           MIO A701. Currently there is only basic support
 292           for this PDA.
 293
 294 config MACH_PCM027
 295         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 296         select PXA27x
 297         select IWMMXT
 298         select PXA_SSP
 299         select PXA_HAVE_BOARD_IRQS
 300
 301 config ARCH_PXA_PALM
 302         bool "PXA based Palm PDAs"
 303         select HAVE_PWM
 304
 305 config MACH_PALMTX
 306         bool "Palm T|X"
 307         default y
 308         depends on ARCH_PXA_PALM
 309         select PXA27x
 310         select IWMMXT
 311         help
 312           Say Y here if you intend to run this kernel on a Palm T|X
 313           handheld computer.
 314
 315 config MACH_PALMZ72
 316         bool "Palm Zire 72"
 317         default y
 318         depends on ARCH_PXA_PALM
 319         select PXA27x
 320         select IWMMXT
 321         help
 322           Say Y here if you intend to run this kernel on Palm Zire 72
 323           handheld computer.
 324
 325 config MACH_PCM990_BASEBOARD
 326         bool "PHYTEC PCM-990 development board"
 327         select HAVE_PWM
 328         depends on MACH_PCM027
 329
 330 choice
 331         prompt "display on pcm990"
 332         depends on MACH_PCM990_BASEBOARD
 333
 334 config PCM990_DISPLAY_SHARP
 335         bool "sharp lq084v1dg21 stn display"
 336
 337 config PCM990_DISPLAY_NEC
 338         bool "nec nl6448bc20_18d tft display"
 339
 340 config PCM990_DISPLAY_NONE
 341         bool "no display"
 342
 343 endchoice
 344
 345 config MACH_AM200EPD
 346         depends on MACH_GUMSTIX_F
 347         bool "Enable AM200EPD board support"
 348
 349 config PXA_EZX
 350         bool "Motorola EZX Platform"
 351         select PXA27x
 352         select IWMMXT
 353         select HAVE_PWM
 354
 355 config MACH_EZX_A780
 356         bool "Motorola EZX A780"
 357         default y
 358         depends on PXA_EZX
 359
 360 config MACH_EZX_E680
 361         bool "Motorola EZX E680"
 362         default y
 363         depends on PXA_EZX
 364
 365 config MACH_EZX_A1200
 366         bool "Motorola EZX A1200"
 367         default y
 368         depends on PXA_EZX
 369
 370 config MACH_EZX_A910
 371         bool "Motorola EZX A910"
 372         default y
 373         depends on PXA_EZX
 374
 375 config MACH_EZX_E6
 376         bool "Motorola EZX E6"
 377         default y
 378         depends on PXA_EZX
 379
 380 config MACH_EZX_E2
 381         bool "Motorola EZX E2"
 382         default y
 383         depends on PXA_EZX
 384
 385 endmenu
 386
 387 config PXA25x
 388         bool
 389         help
 390           Select code specific to PXA21x/25x/26x variants
 391
 392 config PXA27x
 393         bool
 394         help
 395           Select code specific to PXA27x variants
 396
 397 config PXA3xx
 398         bool
 399         help
 400           Select code specific to PXA3xx variants
 401
 402 config PXA_SHARP_C7xx
 403         bool
 404         select PXA_SSP
 405         select SHARPSL_PM
 406         help
 407           Enable support for all Sharp C7xx models
 408
 409 config PXA_SHARP_Cxx00
 410         bool
 411         select PXA_SSP
 412         select SHARPSL_PM
 413         help
 414           Enable common support for Sharp Cxx00 models
 415
 416 config PXA_SSP
 417         tristate
 418         help
 419           Enable support for PXA2xx SSP ports
 420
 421 config PXA_PWM
 422         tristate
 423         default BACKLIGHT_PWM
 424         help
 425           Enable support for PXA2xx/PXA3xx PWM controllers
 426
 427 config TOSA_BT
 428         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 429         depends on MACH_TOSA
 430         select RFKILL
 431         help
 432           This is a simple driver that is able to control
 433           the state of built in bluetooth chip on tosa.
 434
 435 config PXA_HAVE_BOARD_IRQS
 436         bool
 437
 438 config PXA_HAVE_ISA_IRQS
 439         bool
 440
 441 endif