arch/arm/mach-pxa/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 if ARCH_PXA
   3
   4 menu "Intel PXA2xx/PXA3xx Implementations"
   5
   6 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
   7
   8 config MACH_PXA25X_DT
   9         bool "Support PXA25x platforms from device tree"
  10         select PINCTRL
  11         select POWER_SUPPLY
  12         select PXA25x
  13         select USE_OF
  14         help
  15           Include support for Marvell PXA25x based platforms using
  16           the device tree. Needn't select any other machine while
  17           MACH_PXA25x_DT is enabled.
  18
  19 config MACH_PXA27X_DT
  20         bool "Support PXA27x platforms from device tree"
  21         select PINCTRL
  22         select POWER_SUPPLY
  23         select PXA27x
  24         select USE_OF
  25         help
  26           Include support for Marvell PXA27x based platforms using
  27           the device tree. Needn't select any other machine while
  28           MACH_PXA27X_DT is enabled.
  29
  30 config MACH_PXA3XX_DT
  31         bool "Support PXA3xx platforms from device tree"
  32         select CPU_PXA300
  33         select PINCTRL
  34         select POWER_SUPPLY
  35         select PXA3xx
  36         select USE_OF
  37         help
  38           Include support for Marvell PXA3xx based platforms using
  39           the device tree. Needn't select any other machine while
  40           MACH_PXA3XX_DT is enabled.
  41
  42 config ARCH_LUBBOCK
  43         bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  44         select GPIO_REG
  45         select PXA25x
  46         select SA1111
  47
  48 config MACH_MAINSTONE
  49         bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  50         select GPIO_REG
  51         select PXA27x
  52
  53 config MACH_ZYLONITE
  54         bool
  55         select PXA3xx
  56
  57 config MACH_ZYLONITE300
  58         bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  59         select CPU_PXA300
  60         select CPU_PXA310
  61         select MACH_ZYLONITE
  62
  63 config MACH_ZYLONITE320
  64         bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  65         select CPU_PXA320
  66         select MACH_ZYLONITE
  67
  68 config MACH_LITTLETON
  69         bool "PXA3xx Form Factor Platform (aka Littleton)"
  70         select CPU_PXA300
  71         select CPU_PXA310
  72         select PXA3xx
  73
  74 config MACH_TAVOREVB
  75         bool "PXA930 Evaluation Board (aka TavorEVB)"
  76         select CPU_PXA930
  77         select CPU_PXA935
  78         select PXA3xx
  79         select FB
  80         select FB_PXA
  81
  82 config MACH_SAAR
  83         bool "PXA930 Handheld Platform (aka SAAR)"
  84         select CPU_PXA930
  85         select CPU_PXA935
  86         select PXA3xx
  87         select FB
  88         select FB_PXA
  89
  90 comment "Third Party Dev Platforms (sorted by vendor name)"
  91
  92 config ARCH_PXA_IDP
  93         bool "Accelent Xscale IDP"
  94         select PXA25x
  95
  96 config ARCH_VIPER
  97         bool "Arcom/Eurotech VIPER SBC"
  98         select ARCOM_PCMCIA
  99         select I2C_GPIO if I2C=y
 100         select ISA
 101         select PXA25x
 102
 103 config MACH_ARCOM_ZEUS
 104         bool "Arcom/Eurotech ZEUS SBC"
 105         select ARCOM_PCMCIA
 106         select ISA
 107         select PXA27x
 108
 109 config MACH_BALLOON3
 110         bool "Balloon 3 board"
 111         select IWMMXT
 112         select PXA27x
 113
 114 config MACH_CSB726
 115         bool "Enable Cogent CSB726 System On a Module"
 116         select IWMMXT
 117         select PXA27x
 118         help
 119           Say Y here if you intend to run this kernel on a Cogent
 120           CSB726 System On Module.
 121
 122 config CSB726_CSB701
 123         bool "Enable support for CSB701 baseboard"
 124         depends on MACH_CSB726
 125
 126 config MACH_CM_X300
 127         bool "CompuLab CM-X300 modules"
 128         select CPU_PXA300
 129         select CPU_PXA310
 130         select PXA3xx
 131
 132 config MACH_CAPC7117
 133         bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
 134         select CPU_PXA320
 135         select PXA3xx
 136
 137 config ARCH_GUMSTIX
 138         bool "Gumstix XScale 255 boards"
 139         select PXA25x
 140         help
 141           Say Y here if you intend to run this kernel on
 142           Basix, Connex, ws-200ax, ws-400ax systems
 143
 144 choice
 145         prompt "Gumstix Carrier/Expansion Board"
 146         depends on ARCH_GUMSTIX
 147
 148 config GUMSTIX_AM200EPD
 149         bool "Enable AM200EPD board support"
 150
 151 config GUMSTIX_AM300EPD
 152         bool "Enable AM300EPD board support"
 153
 154 endchoice
 155
 156 config MACH_INTELMOTE2
 157         bool "Intel Mote 2 Platform"
 158         select IWMMXT
 159         select PXA27x
 160
 161 config MACH_STARGATE2
 162         bool "Intel Stargate 2 Platform"
 163         select IWMMXT
 164         select PXA27x
 165
 166 config MACH_XCEP
 167         bool "Iskratel Electronics XCEP"
 168         select MTD
 169         select MTD_CFI
 170         select MTD_CFI_INTELEXT
 171         select MTD_PHYSMAP
 172         select PXA25x
 173         help
 174           PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 175           Tuned for usage in Libera instruments for particle accelerators.
 176
 177 config TRIZEPS_PXA
 178         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 179
 180 config MACH_TRIZEPS4
 181         bool "Keith und Koep Trizeps4 DIMM-Module"
 182         depends on TRIZEPS_PXA
 183         select PXA27x
 184         select TRIZEPS_PCMCIA
 185
 186 config MACH_TRIZEPS4WL
 187         bool "Keith und Koep Trizeps4-WL DIMM-Module"
 188         depends on TRIZEPS_PXA
 189         select MACH_TRIZEPS4
 190         select PXA27x
 191         select TRIZEPS_PCMCIA
 192
 193 choice
 194         prompt "Select base board for Trizeps module"
 195         depends on TRIZEPS_PXA
 196
 197 config MACH_TRIZEPS_CONXS
 198         bool "ConXS Eval Board"
 199
 200 config MACH_TRIZEPS_UCONXS
 201         bool "uConXS Eval Board"
 202
 203 config MACH_TRIZEPS_ANY
 204         bool "another Board"
 205
 206 endchoice
 207
 208 config ARCOM_PCMCIA
 209         bool
 210         help
 211           Generic option for Arcom Viper/Zeus PCMCIA
 212
 213 config TRIZEPS_PCMCIA
 214         bool
 215         help
 216           Enable PCMCIA support for Trizeps modules
 217
 218 config MACH_LOGICPD_PXA270
 219         bool "LogicPD PXA270 Card Engine Development Platform"
 220         select PXA27x
 221
 222 config MACH_PCM027
 223         bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 224         select IWMMXT
 225         select PXA27x
 226
 227 config MACH_PCM990_BASEBOARD
 228         bool "PHYTEC PCM-990 development board"
 229         depends on MACH_PCM027
 230
 231 choice
 232         prompt "display on pcm990"
 233         depends on MACH_PCM990_BASEBOARD
 234
 235 config PCM990_DISPLAY_SHARP
 236         bool "sharp lq084v1dg21 stn display"
 237
 238 config PCM990_DISPLAY_NEC
 239         bool "nec nl6448bc20_18d tft display"
 240
 241 config PCM990_DISPLAY_NONE
 242         bool "no display"
 243
 244 endchoice
 245
 246 config MACH_COLIBRI
 247         bool "Toradex Colibri PXA270"
 248         select PXA27x
 249
 250 config MACH_COLIBRI_PXA270_INCOME
 251         bool "Income s.r.o. PXA270 SBC"
 252         depends on MACH_COLIBRI
 253         select PXA27x
 254
 255 config MACH_COLIBRI300
 256         bool "Toradex Colibri PXA300/310"
 257         select CPU_PXA300
 258         select CPU_PXA310
 259         select PXA3xx
 260
 261 config MACH_COLIBRI320
 262         bool "Toradex Colibri PXA320"
 263         select CPU_PXA320
 264         select PXA3xx
 265
 266 config MACH_COLIBRI_EVALBOARD
 267         bool "Toradex Colibri Evaluation Carrier Board support"
 268         depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 269
 270 config MACH_VPAC270
 271         bool "Voipac PXA270"
 272         select HAVE_PATA_PLATFORM
 273         select PXA27x
 274         help
 275           PXA270 based Single Board Computer.
 276
 277 comment "End-user Products (sorted by vendor name)"
 278
 279 config MACH_H4700
 280         bool "HP iPAQ hx4700"
 281         select IWMMXT
 282         select PXA27x
 283
 284 config MACH_H5000
 285         bool "HP iPAQ h5000"
 286         select PXA25x
 287
 288 config MACH_HIMALAYA
 289         bool "HTC Himalaya Support"
 290         select CPU_PXA26x
 291
 292 config MACH_MAGICIAN
 293         bool "Enable HTC Magician Support"
 294         select IWMMXT
 295         select PXA27x
 296
 297 config MACH_MIOA701
 298         bool "Mitac Mio A701 Support"
 299         select IWMMXT
 300         select PXA27x
 301         help
 302           Say Y here if you intend to run this kernel on a
 303           MIO A701. Currently there is only basic support
 304           for this PDA.
 305
 306 config PXA_EZX
 307         bool "Motorola EZX Platform"
 308         select IWMMXT
 309         select PXA27x
 310
 311 config MACH_EZX_A780
 312         bool "Motorola EZX A780"
 313         default y
 314         depends on PXA_EZX
 315
 316 config MACH_EZX_E680
 317         bool "Motorola EZX E680"
 318         default y
 319         depends on PXA_EZX
 320
 321 config MACH_EZX_A1200
 322         bool "Motorola EZX A1200"
 323         default y
 324         depends on PXA_EZX
 325
 326 config MACH_EZX_A910
 327         bool "Motorola EZX A910"
 328         default y
 329         depends on PXA_EZX
 330
 331 config MACH_EZX_E6
 332         bool "Motorola EZX E6"
 333         default y
 334         depends on PXA_EZX
 335
 336 config MACH_EZX_E2
 337         bool "Motorola EZX E2"
 338         default y
 339         depends on PXA_EZX
 340
 341 config MACH_MP900C
 342         bool "Nec Mobilepro 900/c"
 343         select PXA25x
 344
 345 config ARCH_PXA_PALM
 346         bool "PXA based Palm PDAs"
 347
 348 config MACH_PALM27X
 349         bool
 350
 351 config MACH_PALMTE2
 352         bool "Palm Tungsten|E2"
 353         default y
 354         depends on ARCH_PXA_PALM
 355         select PXA25x
 356         help
 357           Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 358           handheld computer.
 359
 360 config MACH_PALMTC
 361         bool "Palm Tungsten|C"
 362         default y
 363         depends on ARCH_PXA_PALM
 364         select PXA25x
 365         help
 366           Say Y here if you intend to run this kernel on a Palm Tungsten|C
 367           handheld computer.
 368
 369 config MACH_PALMT5
 370         bool "Palm Tungsten|T5"
 371         default y
 372         depends on ARCH_PXA_PALM
 373         select IWMMXT
 374         select MACH_PALM27X
 375         select PXA27x
 376         help
 377           Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 378           handheld computer.
 379
 380 config MACH_PALMTX
 381         bool "Palm T|X"
 382         default y
 383         depends on ARCH_PXA_PALM
 384         select IWMMXT
 385         select MACH_PALM27X
 386         select PXA27x
 387         help
 388           Say Y here if you intend to run this kernel on a Palm T|X
 389           handheld computer.
 390
 391 config MACH_PALMZ72
 392         bool "Palm Zire 72"
 393         default y
 394         depends on ARCH_PXA_PALM
 395         select IWMMXT
 396         select MACH_PALM27X
 397         select PXA27x
 398         help
 399           Say Y here if you intend to run this kernel on Palm Zire 72
 400           handheld computer.
 401
 402 config MACH_PALMLD
 403         bool "Palm LifeDrive"
 404         default y
 405         depends on ARCH_PXA_PALM
 406         select IWMMXT
 407         select MACH_PALM27X
 408         select PXA27x
 409         help
 410           Say Y here if you intend to run this kernel on a Palm LifeDrive
 411           handheld computer.
 412
 413 config PALM_TREO
 414         bool
 415         depends on ARCH_PXA_PALM
 416
 417 config MACH_CENTRO
 418         bool "Palm Centro 685 (GSM)"
 419         default y
 420         depends on ARCH_PXA_PALM
 421         select IWMMXT
 422         select MACH_PALM27X
 423         select PALM_TREO
 424         select PXA27x
 425         help
 426           Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 427           smartphone.
 428
 429 config MACH_TREO680
 430         bool "Palm Treo 680"
 431         default y
 432         depends on ARCH_PXA_PALM
 433         select IWMMXT
 434         select MACH_PALM27X
 435         select PALM_TREO
 436         select PXA27x
 437         help
 438           Say Y here if you intend to run this kernel on Palm Treo 680
 439           smartphone.
 440
 441 config PXA_SHARPSL
 442         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 443         select SHARP_PARAM
 444         select SHARP_SCOOP
 445         help
 446           Say Y here if you intend to run this kernel on a
 447           Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
 448           SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
 449           SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 450           handheld computer.
 451
 452 config PXA_SHARPSL_DETECT_MACH_ID
 453         bool "Detect machine ID at run-time in the decompressor"
 454         depends on PXA_SHARPSL
 455         help
 456           Say Y here if you want the zImage decompressor to detect
 457           the Zaurus machine ID at run-time. For latest kexec-based
 458           boot loader, this is not necessary.
 459
 460 config MACH_POODLE
 461         bool "Enable Sharp SL-5600 (Poodle) Support"
 462         depends on PXA_SHARPSL
 463         select PXA25x
 464         select SHARP_LOCOMO
 465
 466 config MACH_CORGI
 467         bool "Enable Sharp SL-C700 (Corgi) Support"
 468         depends on PXA_SHARPSL
 469         select PXA25x
 470         select PXA_SHARP_C7xx
 471
 472 config MACH_SHEPHERD
 473         bool "Enable Sharp SL-C750 (Shepherd) Support"
 474         depends on PXA_SHARPSL
 475         select PXA25x
 476         select PXA_SHARP_C7xx
 477
 478 config MACH_HUSKY
 479         bool "Enable Sharp SL-C760 (Husky) Support"
 480         depends on PXA_SHARPSL
 481         select PXA25x
 482         select PXA_SHARP_C7xx
 483
 484 config MACH_AKITA
 485         bool "Enable Sharp SL-1000 (Akita) Support"
 486         depends on PXA_SHARPSL
 487         select I2C
 488         select I2C_PXA
 489         select MACH_SPITZ
 490         select PXA27x
 491         select PXA_SHARP_Cxx00
 492
 493 config MACH_SPITZ
 494         bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
 495         depends on PXA_SHARPSL
 496         select PXA27x
 497         select PXA_SHARP_Cxx00
 498
 499 config MACH_BORZOI
 500         bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
 501         depends on PXA_SHARPSL
 502         select PXA27x
 503         select PXA_SHARP_Cxx00
 504
 505 config MACH_TOSA
 506         bool "Enable Sharp SL-6000x (Tosa) Support"
 507         depends on PXA_SHARPSL
 508         select PXA25x
 509
 510 config TOSA_BT
 511         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 512         depends on MACH_TOSA && NET
 513         select RFKILL
 514         help
 515           This is a simple driver that is able to control
 516           the state of built in bluetooth chip on tosa.
 517
 518 config TOSA_USE_EXT_KEYCODES
 519         bool "Tosa keyboard: use extended keycodes"
 520         depends on MACH_TOSA
 521         help
 522           Say Y here to enable the tosa keyboard driver to generate extended
 523           (>= 127) keycodes. Be aware, that they can't be correctly interpreted
 524           by either console keyboard driver or by Kdrive keybd driver.
 525
 526           Say Y only if you know, what you are doing!
 527
 528 config MACH_ICONTROL
 529         bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
 530         select CPU_PXA320
 531         select PXA3xx
 532
 533 config ARCH_PXA_ESERIES
 534         bool "PXA based Toshiba e-series PDAs"
 535         select FB_W100
 536         select FB
 537         select PXA25x
 538
 539 config MACH_E330
 540         bool "Toshiba e330"
 541         default y
 542         depends on ARCH_PXA_ESERIES
 543         help
 544           Say Y here if you intend to run this kernel on a Toshiba
 545           e330 family PDA.
 546
 547 config MACH_E350
 548         bool "Toshiba e350"
 549         default y
 550         depends on ARCH_PXA_ESERIES
 551         help
 552           Say Y here if you intend to run this kernel on a Toshiba
 553           e350 family PDA.
 554
 555 config MACH_E740
 556         bool "Toshiba e740"
 557         default y
 558         depends on ARCH_PXA_ESERIES
 559         help
 560           Say Y here if you intend to run this kernel on a Toshiba
 561           e740 family PDA.
 562
 563 config MACH_E750
 564         bool "Toshiba e750"
 565         default y
 566         depends on ARCH_PXA_ESERIES
 567         help
 568           Say Y here if you intend to run this kernel on a Toshiba
 569           e750 family PDA.
 570
 571 config MACH_E400
 572         bool "Toshiba e400"
 573         default y
 574         depends on ARCH_PXA_ESERIES
 575         help
 576           Say Y here if you intend to run this kernel on a Toshiba
 577           e400 family PDA.
 578
 579 config MACH_E800
 580         bool "Toshiba e800"
 581         default y
 582         depends on ARCH_PXA_ESERIES
 583         help
 584           Say Y here if you intend to run this kernel on a Toshiba
 585           e800 family PDA.
 586
 587 config MACH_ZIPIT2
 588         bool "Zipit Z2 Handheld"
 589         select PXA27x
 590 endmenu
 591
 592 config PXA25x
 593         bool
 594         select CPU_XSCALE
 595         help
 596           Select code specific to PXA21x/25x/26x variants
 597
 598 config PXA27x
 599         bool
 600         select CPU_XSCALE
 601         help
 602           Select code specific to PXA27x variants
 603
 604 config CPU_PXA26x
 605         bool
 606         select PXA25x
 607         help
 608           Select code specific to PXA26x (codename Dalhart)
 609
 610 config PXA3xx
 611         bool
 612         select CPU_XSC3
 613         help
 614           Select code specific to PXA3xx variants
 615
 616 config CPU_PXA300
 617         bool
 618         select PXA3xx
 619         help
 620           PXA300 (codename Monahans-L)
 621
 622 config CPU_PXA310
 623         bool
 624         select CPU_PXA300
 625         select PXA310_ULPI if USB_ULPI
 626         help
 627           PXA310 (codename Monahans-LV)
 628
 629 config CPU_PXA320
 630         bool
 631         select PXA3xx
 632         help
 633           PXA320 (codename Monahans-P)
 634
 635 config CPU_PXA930
 636         bool
 637         select PXA3xx
 638         help
 639           PXA930 (codename Tavor-P)
 640
 641 config CPU_PXA935
 642         bool
 643         select CPU_PXA930
 644         help
 645           PXA935 (codename Tavor-P65)
 646
 647 config PXA_SHARP_C7xx
 648         bool
 649         select SHARPSL_PM
 650         help
 651           Enable support for all Sharp C7xx models
 652
 653 config PXA_SHARP_Cxx00
 654         bool
 655         select SHARPSL_PM
 656         help
 657           Enable common support for Sharp Cxx00 models
 658
 659 config SHARPSL_PM
 660         bool
 661         select APM_EMULATION
 662         select SHARPSL_PM_MAX1111
 663
 664 config SHARPSL_PM_MAX1111
 665         bool
 666         select HWMON
 667         select SENSORS_MAX1111
 668         select SPI
 669         select SPI_MASTER
 670
 671 config PXA310_ULPI
 672         bool
 673
 674 config PXA_SYSTEMS_CPLDS
 675         tristate "Motherboard cplds"
 676         default ARCH_LUBBOCK || MACH_MAINSTONE
 677         help
 678           This driver supports the Lubbock and Mainstone multifunction chip
 679           found on the pxa25x development platform system (Lubbock) and pxa27x
 680           development platform system (Mainstone). This IO board supports the
 681           interrupts handling, ethernet controller, flash chips, etc ...
 682
 683 endif