arch/arm/mach-pxa/idp.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/idp.c
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License version 2 as
   6  *  published by the Free Software Foundation.
   7  *
   8  *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
   9  *
  10  *  2001-09-13: Cliff Brake <cbrake@accelent.com>
  11  *              Initial code
  12  *
  13  *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
  14  *              <http://www.vibren.com> <http://bec-systems.com>
  15  *              Updated for 2.6 kernel
  16  *
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/irq.h>
  22 #include <linux/leds.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/fb.h>
  25
  26 #include <asm/setup.h>
  27 #include <asm/memory.h>
  28 #include <asm/mach-types.h>
  29 #include <mach/hardware.h>
  30 #include <asm/irq.h>
  31
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34
  35 #include "pxa25x.h"
  36 #include "idp.h"
  37 #include <linux/platform_data/video-pxafb.h>
  38 #include <mach/bitfield.h>
  39 #include <linux/platform_data/mmc-pxamci.h>
  40 #include <linux/smc91x.h>
  41
  42 #include "generic.h"
  43 #include "devices.h"
  44
  45 /* TODO:
  46  * - add pxa2xx_audio_ops_t device structure
  47  * - Ethernet interrupt
  48  */
  49
  50 static unsigned long idp_pin_config[] __initdata = {
  51         /* LCD */
  52         GPIOxx_LCD_DSTN_16BPP,
  53
  54         /* BTUART */
  55         GPIO42_BTUART_RXD,
  56         GPIO43_BTUART_TXD,
  57         GPIO44_BTUART_CTS,
  58         GPIO45_BTUART_RTS,
  59
  60         /* STUART */
  61         GPIO46_STUART_RXD,
  62         GPIO47_STUART_TXD,
  63
  64         /* MMC */
  65         GPIO6_MMC_CLK,
  66         GPIO8_MMC_CS0,
  67
  68         /* Ethernet */
  69         GPIO33_nCS_5,   /* Ethernet CS */
  70         GPIO4_GPIO,     /* Ethernet IRQ */
  71 };
  72
  73 static struct resource smc91x_resources[] = {
  74         [0] = {
  75                 .start  = (IDP_ETH_PHYS + 0x300),
  76                 .end    = (IDP_ETH_PHYS + 0xfffff),
  77                 .flags  = IORESOURCE_MEM,
  78         },
  79         [1] = {
  80                 .start  = PXA_GPIO_TO_IRQ(4),
  81                 .end    = PXA_GPIO_TO_IRQ(4),
  82                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  83         }
  84 };
  85
  86 static struct smc91x_platdata smc91x_platdata = {
  87         .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
  88                  SMC91X_USE_DMA | SMC91X_NOWAIT,
  89         .pxa_u16_align4 = true,
  90 };
  91
  92 static struct platform_device smc91x_device = {
  93         .name           = "smc91x",
  94         .id             = 0,
  95         .num_resources  = ARRAY_SIZE(smc91x_resources),
  96         .resource       = smc91x_resources,
  97         .dev.platform_data = &smc91x_platdata,
  98 };
  99
 100 static void idp_backlight_power(int on)
 101 {
 102         if (on) {
 103                 IDP_CPLD_LCD |= (1<<1);
 104         } else {
 105                 IDP_CPLD_LCD &= ~(1<<1);
 106         }
 107 }
 108
 109 static void idp_vlcd(int on)
 110 {
 111         if (on) {
 112                 IDP_CPLD_LCD |= (1<<2);
 113         } else {
 114                 IDP_CPLD_LCD &= ~(1<<2);
 115         }
 116 }
 117
 118 static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
 119 {
 120         if (on) {
 121                 IDP_CPLD_LCD |= (1<<0);
 122         } else {
 123                 IDP_CPLD_LCD &= ~(1<<0);
 124         }
 125
 126         /* call idp_vlcd for now as core driver does not support
 127          * both power and vlcd hooks.  Note, this is not technically
 128          * the correct sequence, but seems to work.  Disclaimer:
 129          * this may eventually damage the display.
 130          */
 131
 132         idp_vlcd(on);
 133 }
 134
 135 static struct pxafb_mode_info sharp_lm8v31_mode = {
 136         .pixclock       = 270000,
 137         .xres           = 640,
 138         .yres           = 480,
 139         .bpp            = 16,
 140         .hsync_len      = 1,
 141         .left_margin    = 3,
 142         .right_margin   = 3,
 143         .vsync_len      = 1,
 144         .upper_margin   = 0,
 145         .lower_margin   = 0,
 146         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 147         .cmap_greyscale = 0,
 148 };
 149
 150 static struct pxafb_mach_info sharp_lm8v31 = {
 151         .modes          = &sharp_lm8v31_mode,
 152         .num_modes      = 1,
 153         .cmap_inverse   = 0,
 154         .cmap_static    = 0,
 155         .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
 156                           LCD_AC_BIAS_FREQ(255),
 157         .pxafb_backlight_power = &idp_backlight_power,
 158         .pxafb_lcd_power = &idp_lcd_power
 159 };
 160
 161 static struct pxamci_platform_data idp_mci_platform_data = {
 162         .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 163         .gpio_card_detect       = -1,
 164         .gpio_card_ro           = -1,
 165         .gpio_power             = -1,
 166 };
 167
 168 static void __init idp_init(void)
 169 {
 170         printk("idp_init()\n");
 171
 172         pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
 173         pxa_set_ffuart_info(NULL);
 174         pxa_set_btuart_info(NULL);
 175         pxa_set_stuart_info(NULL);
 176
 177         platform_device_register(&smc91x_device);
 178         //platform_device_register(&mst_audio_device);
 179         pxa_set_fb_info(NULL, &sharp_lm8v31);
 180         pxa_set_mci_info(&idp_mci_platform_data);
 181 }
 182
 183 static struct map_desc idp_io_desc[] __initdata = {
 184         {
 185                 .virtual        =  IDP_COREVOLT_VIRT,
 186                 .pfn            = __phys_to_pfn(IDP_COREVOLT_PHYS),
 187                 .length         = IDP_COREVOLT_SIZE,
 188                 .type           = MT_DEVICE
 189         }, {
 190                 .virtual        =  IDP_CPLD_VIRT,
 191                 .pfn            = __phys_to_pfn(IDP_CPLD_PHYS),
 192                 .length         = IDP_CPLD_SIZE,
 193                 .type           = MT_DEVICE
 194         }
 195 };
 196
 197 static void __init idp_map_io(void)
 198 {
 199         pxa25x_map_io();
 200         iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 201 }
 202
 203 /* LEDs */
 204 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 205 struct idp_led {
 206         struct led_classdev     cdev;
 207         u8                      mask;
 208 };
 209
 210 /*
 211  * The triggers lines up below will only be used if the
 212  * LED triggers are compiled in.
 213  */
 214 static const struct {
 215         const char *name;
 216         const char *trigger;
 217 } idp_leds[] = {
 218         { "idp:green", "heartbeat", },
 219         { "idp:red", "cpu0", },
 220 };
 221
 222 static void idp_led_set(struct led_classdev *cdev,
 223                 enum led_brightness b)
 224 {
 225         struct idp_led *led = container_of(cdev,
 226                         struct idp_led, cdev);
 227         u32 reg = IDP_CPLD_LED_CONTROL;
 228
 229         if (b != LED_OFF)
 230                 reg &= ~led->mask;
 231         else
 232                 reg |= led->mask;
 233
 234         IDP_CPLD_LED_CONTROL = reg;
 235 }
 236
 237 static enum led_brightness idp_led_get(struct led_classdev *cdev)
 238 {
 239         struct idp_led *led = container_of(cdev,
 240                         struct idp_led, cdev);
 241
 242         return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
 243 }
 244
 245 static int __init idp_leds_init(void)
 246 {
 247         int i;
 248
 249         if (!machine_is_pxa_idp())
 250                 return -ENODEV;
 251
 252         for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
 253                 struct idp_led *led;
 254
 255                 led = kzalloc(sizeof(*led), GFP_KERNEL);
 256                 if (!led)
 257                         break;
 258
 259                 led->cdev.name = idp_leds[i].name;
 260                 led->cdev.brightness_set = idp_led_set;
 261                 led->cdev.brightness_get = idp_led_get;
 262                 led->cdev.default_trigger = idp_leds[i].trigger;
 263
 264                 if (i == 0)
 265                         led->mask = IDP_HB_LED;
 266                 else
 267                         led->mask = IDP_BUSY_LED;
 268
 269                 if (led_classdev_register(NULL, &led->cdev) < 0) {
 270                         kfree(led);
 271                         break;
 272                 }
 273         }
 274
 275         return 0;
 276 }
 277
 278 /*
 279  * Since we may have triggers on any subsystem, defer registration
 280  * until after subsystem_init.
 281  */
 282 fs_initcall(idp_leds_init);
 283 #endif
 284
 285 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 286         /* Maintainer: Vibren Technologies */
 287         .map_io         = idp_map_io,
 288         .nr_irqs        = PXA_NR_IRQS,
 289         .init_irq       = pxa25x_init_irq,
 290         .handle_irq     = pxa25x_handle_irq,
 291         .init_time      = pxa_timer_init,
 292         .init_machine   = idp_init,
 293         .restart        = pxa_restart,
 294 MACHINE_END