arch/arm/mach-s3c2410/Kconfig

   1 # Copyright 2007 Simtec Electronics
   2 #
   3 # Licensed under GPLv2
   4
   5 config CPU_S3C2410
   6         bool
   7         depends on ARCH_S3C2410
   8         select CPU_ARM920T
   9         select S3C2410_CLOCK
  10         select S3C2410_GPIO
  11         select CPU_LLSERIAL_S3C2410
  12         select S3C2410_PM if PM
  13         select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
  14         help
  15           Support for S3C2410 and S3C2410A family from the S3C24XX line
  16           of Samsung Mobile CPUs.
  17
  18 config CPU_S3C2410_DMA
  19         bool
  20         depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
  21         default y if CPU_S3C2410 || CPU_S3C2442
  22         help
  23           DMA device selection for S3C2410 and compatible CPUs
  24
  25 config S3C2410_PM
  26         bool
  27         help
  28           Power Management code common to S3C2410 and better
  29
  30 config S3C2410_GPIO
  31         bool
  32         help
  33           GPIO code for S3C2410 and similar processors
  34
  35 config SIMTEC_NOR
  36         bool
  37         help
  38           Internal node to specify machine has simtec NOR mapping
  39
  40 config MACH_BAST_IDE
  41         bool
  42         select HAVE_PATA_PLATFORM
  43         help
  44           Internal node for machines with an BAST style IDE
  45           interface
  46
  47 # cpu frequency scaling support
  48
  49 config S3C2410_CPUFREQ
  50         bool
  51         depends on CPU_FREQ_S3C24XX && CPU_S3C2410
  52         select S3C2410_CPUFREQ_UTILS
  53         help
  54           CPU Frequency scaling support for S3C2410
  55
  56 config S3C2410_PLLTABLE
  57         bool
  58         depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
  59         default y
  60         help
  61           Select the PLL table for the S3C2410
  62
  63 menu "S3C2410 Machines"
  64
  65 config ARCH_SMDK2410
  66         bool "SMDK2410/A9M2410"
  67         select CPU_S3C2410
  68         select MACH_SMDK
  69         help
  70            Say Y here if you are using the SMDK2410 or the derived module A9M2410
  71            <http://www.fsforth.de>
  72
  73 config ARCH_H1940
  74         bool "IPAQ H1940"
  75         select CPU_S3C2410
  76         select PM_H1940 if PM
  77         select S3C_DEV_USB_HOST
  78         select S3C_DEV_NAND
  79         help
  80           Say Y here if you are using the HP IPAQ H1940
  81
  82 config H1940BT
  83         tristate "Control the state of H1940 bluetooth chip"
  84         depends on ARCH_H1940
  85         select RFKILL
  86         help
  87           This is a simple driver that is able to control
  88           the state of built in bluetooth chip on h1940.
  89
  90 config PM_H1940
  91         bool
  92         help
  93           Internal node for H1940 and related PM
  94
  95 config MACH_N30
  96         bool "Acer N30 family"
  97         select CPU_S3C2410
  98         select S3C_DEV_USB_HOST
  99         select S3C_DEV_NAND
 100         help
 101           Say Y here if you want suppt for the Acer N30, Acer N35,
 102           Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 103
 104 config ARCH_BAST
 105         bool "Simtec Electronics BAST (EB2410ITX)"
 106         select CPU_S3C2410
 107         select S3C2410_IOTIMING if S3C2410_CPUFREQ
 108         select PM_SIMTEC if PM
 109         select SIMTEC_NOR
 110         select MACH_BAST_IDE
 111         select S3C24XX_DCLK
 112         select ISA
 113         select S3C_DEV_USB_HOST
 114         select S3C_DEV_NAND
 115         help
 116           Say Y here if you are using the Simtec Electronics EB2410ITX
 117           development board (also known as BAST)
 118
 119 config MACH_OTOM
 120         bool "NexVision OTOM Board"
 121         select CPU_S3C2410
 122         select S3C_DEV_USB_HOST
 123         select S3C_DEV_NAND
 124         help
 125           Say Y here if you are using the Nex Vision OTOM board
 126
 127 config MACH_AML_M5900
 128         bool "AML M5900 Series"
 129         select CPU_S3C2410
 130         select PM_SIMTEC if PM
 131         select S3C_DEV_USB_HOST
 132         help
 133            Say Y here if you are using the American Microsystems M5900 Series
 134            <http://www.amltd.com>
 135
 136 config BAST_PC104_IRQ
 137         bool "BAST PC104 IRQ support"
 138         depends on ARCH_BAST
 139         default y
 140         help
 141           Say Y here to enable the PC104 IRQ routing on the
 142           Simtec BAST (EB2410ITX)
 143
 144 config MACH_TCT_HAMMER
 145         bool "TCT Hammer Board"
 146         select CPU_S3C2410
 147         select S3C_DEV_USB_HOST
 148         help
 149            Say Y here if you are using the TinCanTools Hammer Board
 150            <http://www.tincantools.com>
 151
 152 config MACH_VR1000
 153         bool "Thorcom VR1000"
 154         select PM_SIMTEC if PM
 155         select S3C24XX_DCLK
 156         select SIMTEC_NOR
 157         select MACH_BAST_IDE
 158         select CPU_S3C2410
 159         select S3C_DEV_USB_HOST
 160         help
 161           Say Y here if you are using the Thorcom VR1000 board.
 162
 163 config MACH_QT2410
 164         bool "QT2410"
 165         select CPU_S3C2410
 166         select S3C_DEV_USB_HOST
 167         select S3C_DEV_NAND
 168         help
 169            Say Y here if you are using the Armzone QT2410
 170
 171 endmenu