arch/arm/mach-s3c64xx/Kconfig

   1 # Copyright 2008 Openmoko, Inc.
   2 #       Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
   3 #
   4 # Licensed under GPLv2
   5 menuconfig ARCH_S3C64XX
   6         bool "Samsung S3C64XX"
   7         depends on ARCH_MULTI_V6
   8         select ARM_AMBA
   9         select ARM_VIC
  10         select CLKSRC_SAMSUNG_PWM
  11         select COMMON_CLK_SAMSUNG
  12         select GPIO_SAMSUNG if ATAGS
  13         select GPIOLIB
  14         select HAVE_S3C2410_I2C if I2C
  15         select HAVE_S3C2410_WATCHDOG if WATCHDOG
  16         select HAVE_TCM
  17         select PLAT_SAMSUNG
  18         select PM_GENERIC_DOMAINS if PM
  19         select S3C_DEV_NAND if ATAGS
  20         select S3C_GPIO_TRACK if ATAGS
  21         select SAMSUNG_ATAGS if ATAGS
  22         select SAMSUNG_WAKEMASK if PM
  23         select SAMSUNG_WDT_RESET
  24         help
  25           Samsung S3C64XX series based systems
  26
  27 if ARCH_S3C64XX
  28
  29 # Configuration options for the S3C6410 CPU
  30
  31 config CPU_S3C6400
  32         bool
  33         help
  34           Enable S3C6400 CPU support
  35
  36 config CPU_S3C6410
  37         bool
  38         help
  39           Enable S3C6410 CPU support
  40
  41 config S3C64XX_PL080
  42         def_bool DMADEVICES
  43         select ARM_AMBA
  44         select AMBA_PL08X
  45
  46 config S3C64XX_SETUP_SDHCI
  47         bool
  48         select S3C64XX_SETUP_SDHCI_GPIO
  49         help
  50           Internal configuration for default SDHCI setup for S3C6400 and
  51           S3C6410 SoCs.
  52
  53 config S3C64XX_DEV_ONENAND1
  54         bool
  55         help
  56           Compile in platform device definition for OneNAND1 controller
  57
  58 config SAMSUNG_DEV_BACKLIGHT
  59         bool
  60         depends on SAMSUNG_DEV_PWM
  61         help
  62           Compile in platform device definition LCD backlight with PWM Timer
  63
  64 # platform specific device setup
  65
  66 config S3C64XX_SETUP_I2C0
  67         bool
  68         default y
  69         help
  70           Common setup code for i2c bus 0.
  71
  72           Note, currently since i2c0 is always compiled, this setup helper
  73           is always compiled with it.
  74
  75 config S3C64XX_SETUP_I2C1
  76         bool
  77         help
  78           Common setup code for i2c bus 1.
  79
  80 config S3C64XX_SETUP_IDE
  81         bool
  82         help
  83           Common setup code for S3C64XX IDE.
  84
  85 config S3C64XX_SETUP_FB_24BPP
  86         bool
  87         help
  88           Common setup code for S3C64XX with an 24bpp RGB display helper.
  89
  90 config S3C64XX_SETUP_KEYPAD
  91         bool
  92         help
  93           Common setup code for S3C64XX KEYPAD GPIO configurations
  94
  95 config S3C64XX_SETUP_SDHCI_GPIO
  96         bool
  97         help
  98           Common setup code for S3C64XX SDHCI GPIO configurations
  99
 100 config S3C64XX_SETUP_SPI
 101         bool
 102         help
 103          Common setup code for SPI GPIO configurations
 104
 105 config S3C64XX_SETUP_USB_PHY
 106         bool
 107         help
 108           Common setup code for USB PHY controller
 109
 110 # S36400 Macchine support
 111
 112 config MACH_SMDK6400
 113        bool "SMDK6400"
 114         depends on ATAGS
 115         select CPU_S3C6400
 116         select S3C64XX_SETUP_SDHCI
 117         select S3C_DEV_HSMMC1
 118         help
 119           Machine support for the Samsung SMDK6400
 120
 121 # S3C6410 machine support
 122
 123 config MACH_ANW6410
 124         bool "A&W6410"
 125         depends on ATAGS
 126         select CPU_S3C6410
 127         select S3C64XX_SETUP_FB_24BPP
 128         select S3C_DEV_FB
 129         help
 130           Machine support for the A&W6410
 131
 132 config MACH_MINI6410
 133         bool "MINI6410"
 134         depends on ATAGS
 135         select CPU_S3C6410
 136         select S3C64XX_SETUP_FB_24BPP
 137         select S3C64XX_SETUP_SDHCI
 138         select S3C_DEV_FB
 139         select S3C_DEV_HSMMC
 140         select S3C_DEV_HSMMC1
 141         select S3C_DEV_NAND
 142         select S3C_DEV_USB_HOST
 143         select SAMSUNG_DEV_ADC
 144         select SAMSUNG_DEV_TS
 145         help
 146           Machine support for the FriendlyARM MINI6410
 147
 148 config MACH_REAL6410
 149         bool "REAL6410"
 150         depends on ATAGS
 151         select CPU_S3C6410
 152         select S3C64XX_SETUP_FB_24BPP
 153         select S3C64XX_SETUP_SDHCI
 154         select S3C_DEV_FB
 155         select S3C_DEV_HSMMC
 156         select S3C_DEV_HSMMC1
 157         select S3C_DEV_NAND
 158         select S3C_DEV_USB_HOST
 159         select SAMSUNG_DEV_ADC
 160         select SAMSUNG_DEV_TS
 161         help
 162           Machine support for the CoreWind REAL6410
 163
 164 config MACH_SMDK6410
 165         bool "SMDK6410"
 166         depends on ATAGS
 167         select CPU_S3C6410
 168         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 169         select S3C64XX_SETUP_FB_24BPP
 170         select S3C64XX_SETUP_I2C1
 171         select S3C64XX_SETUP_IDE
 172         select S3C64XX_SETUP_KEYPAD
 173         select S3C64XX_SETUP_SDHCI
 174         select S3C64XX_SETUP_USB_PHY
 175         select S3C_DEV_FB
 176         select S3C_DEV_HSMMC
 177         select S3C_DEV_HSMMC1
 178         select S3C_DEV_I2C1
 179         select S3C_DEV_RTC
 180         select S3C_DEV_USB_HOST
 181         select S3C_DEV_USB_HSOTG
 182         select S3C_DEV_WDT
 183         select SAMSUNG_DEV_ADC
 184         select SAMSUNG_DEV_BACKLIGHT
 185         select SAMSUNG_DEV_IDE
 186         select SAMSUNG_DEV_KEYPAD
 187         select SAMSUNG_DEV_PWM
 188         select SAMSUNG_DEV_TS
 189         help
 190           Machine support for the Samsung SMDK6410
 191
 192 # At least some of the SMDK6410s were shipped with the card detect
 193 # for the MMC/SD slots connected to the same input. This means that
 194 # either the boards need to be altered to have channel0 to an alternate
 195 # configuration or that only one slot can be used.
 196
 197 choice
 198         prompt "SMDK6410 MMC/SD slot setup"
 199         depends on MACH_SMDK6410
 200
 201 config SMDK6410_SD_CH0
 202         bool "Use channel 0 only"
 203         depends on MACH_SMDK6410
 204         help
 205           Select CON7 (channel 0) as the MMC/SD slot, as
 206           at least some SMDK6410 boards come with the
 207           resistors fitted so that the card detects for
 208           channels 0 and 1 are the same.
 209
 210 config SMDK6410_SD_CH1
 211         bool "Use channel 1 only"
 212         depends on MACH_SMDK6410
 213         help
 214           Select CON6 (channel 1) as the MMC/SD slot, as
 215           at least some SMDK6410 boards come with the
 216           resistors fitted so that the card detects for
 217           channels 0 and 1 are the same.
 218
 219 endchoice
 220
 221 config SMDK6410_WM1190_EV1
 222         bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 223         depends on MACH_SMDK6410
 224         depends on I2C=y
 225         select MFD_WM8350_I2C
 226         select REGULATOR
 227         select REGULATOR_WM8350
 228         help
 229           The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 230           and audio daughtercard for the Samsung SMDK6410 reference
 231           platform.  Enabling this option will build support for this
 232           module into the kernel.  The presence of the module will be
 233           detected at runtime so the resulting kernel can be used
 234           with or without the 1190-EV1 fitted.
 235
 236 config SMDK6410_WM1192_EV1
 237         bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
 238         depends on MACH_SMDK6410
 239         depends on I2C=y
 240         select MFD_WM831X
 241         select MFD_WM831X_I2C
 242         select REGULATOR
 243         select REGULATOR_WM831X
 244         help
 245           The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 246           daughtercard for the Samsung SMDK6410 reference platform.
 247           Enabling this option will build support for this module into
 248           the kernel.  The presence of the daughtercard will be
 249           detected at runtime so the resulting kernel can be used
 250           with or without the 1192-EV1 fitted.
 251
 252 config MACH_NCP
 253         bool "NCP"
 254         depends on ATAGS
 255         select CPU_S3C6410
 256         select S3C64XX_SETUP_I2C1
 257         select S3C_DEV_HSMMC1
 258         select S3C_DEV_I2C1
 259         help
 260           Machine support for the Samsung NCP
 261
 262 config MACH_HMT
 263         bool "Airgoo HMT"
 264         depends on ATAGS
 265         select CPU_S3C6410
 266         select S3C64XX_SETUP_FB_24BPP
 267         select S3C_DEV_FB
 268         select S3C_DEV_NAND
 269         select S3C_DEV_USB_HOST
 270         select SAMSUNG_DEV_PWM
 271         help
 272           Machine support for the Airgoo HMT
 273
 274 config MACH_SMARTQ
 275         bool
 276         select CPU_S3C6410
 277         select S3C64XX_SETUP_FB_24BPP
 278         select S3C64XX_SETUP_SDHCI
 279         select S3C64XX_SETUP_USB_PHY
 280         select S3C_DEV_FB
 281         select S3C_DEV_HSMMC
 282         select S3C_DEV_HSMMC1
 283         select S3C_DEV_HSMMC2
 284         select S3C_DEV_HWMON
 285         select S3C_DEV_RTC
 286         select S3C_DEV_USB_HOST
 287         select S3C_DEV_USB_HSOTG
 288         select SAMSUNG_DEV_ADC
 289         select SAMSUNG_DEV_PWM
 290         select SAMSUNG_DEV_TS
 291         help
 292             Shared machine support for SmartQ 5/7
 293
 294 config MACH_SMARTQ5
 295         bool "SmartQ 5"
 296         depends on ATAGS
 297         select MACH_SMARTQ
 298         help
 299             Machine support for the SmartQ 5
 300
 301 config MACH_SMARTQ7
 302         bool "SmartQ 7"
 303         depends on ATAGS
 304         select MACH_SMARTQ
 305         help
 306             Machine support for the SmartQ 7
 307
 308 config MACH_WLF_CRAGG_6410
 309         bool "Wolfson Cragganmore 6410"
 310         depends on ATAGS
 311         depends on I2C=y
 312         select CPU_S3C6410
 313         select LEDS_GPIO_REGISTER
 314         select S3C64XX_DEV_SPI0
 315         select S3C64XX_SETUP_FB_24BPP
 316         select S3C64XX_SETUP_I2C1
 317         select S3C64XX_SETUP_IDE
 318         select S3C64XX_SETUP_KEYPAD
 319         select S3C64XX_SETUP_SDHCI
 320         select S3C64XX_SETUP_SPI
 321         select S3C64XX_SETUP_USB_PHY
 322         select S3C_DEV_FB
 323         select S3C_DEV_HSMMC
 324         select S3C_DEV_HSMMC1
 325         select S3C_DEV_HSMMC2
 326         select S3C_DEV_I2C1
 327         select S3C_DEV_RTC
 328         select S3C_DEV_USB_HOST
 329         select S3C_DEV_USB_HSOTG
 330         select S3C_DEV_WDT
 331         select SAMSUNG_DEV_ADC
 332         select SAMSUNG_DEV_KEYPAD
 333         select SAMSUNG_DEV_PWM
 334         help
 335           Machine support for the Wolfson Cragganmore S3C6410 variant.
 336
 337 config MACH_S3C64XX_DT
 338         bool "Samsung S3C6400/S3C6410 machine using Device Tree"
 339         select CLKSRC_OF
 340         select CPU_S3C6400
 341         select CPU_S3C6410
 342         select PINCTRL
 343         select PINCTRL_S3C64XX
 344         help
 345           Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
 346           enabled.
 347           Select this if a fdt blob is available for your S3C64XX SoC based
 348           board.
 349           Note: This is under development and not all peripherals can be
 350           supported with this machine file.
 351
 352 endif