arch/arm/mach-s3c64xx/common.c

   1 /*
   2  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
   3  *              http://www.samsung.com
   4  *
   5  * Copyright 2008 Openmoko, Inc.
   6  * Copyright 2008 Simtec Electronics
   7  *      Ben Dooks <ben@simtec.co.uk>
   8  *      http://armlinux.simtec.co.uk/
   9  *
  10  * Common Codes for S3C64XX machines
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  */
  16
  17 /*
  18  * NOTE: Code in this file is not used when booting with Device Tree support.
  19  */
  20
  21 #include <linux/kernel.h>
  22 #include <linux/init.h>
  23 #include <linux/module.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/ioport.h>
  26 #include <linux/serial_core.h>
  27 #include <linux/serial_s3c.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/reboot.h>
  30 #include <linux/io.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/irq.h>
  33 #include <linux/gpio.h>
  34 #include <linux/irqchip/arm-vic.h>
  35 #include <clocksource/samsung_pwm.h>
  36
  37 #include <asm/mach/arch.h>
  38 #include <asm/mach/map.h>
  39 #include <asm/system_misc.h>
  40
  41 #include <mach/map.h>
  42 #include <mach/hardware.h>
  43 #include <mach/regs-gpio.h>
  44 #include <mach/gpio-samsung.h>
  45
  46 #include <plat/cpu.h>
  47 #include <plat/devs.h>
  48 #include <plat/pm.h>
  49 #include <plat/gpio-cfg.h>
  50 #include <plat/pwm-core.h>
  51 #include <plat/regs-irqtype.h>
  52
  53 #include "common.h"
  54 #include "irq-uart.h"
  55 #include "watchdog-reset.h"
  56
  57 /* External clock frequency */
  58 static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
  59
  60 void __init s3c64xx_set_xtal_freq(unsigned long freq)
  61 {
  62         xtal_f = freq;
  63 }
  64
  65 void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
  66 {
  67         xusbxti_f = freq;
  68 }
  69
  70 /* uart registration process */
  71
  72 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  73 {
  74         s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
  75 }
  76
  77 /* table of supported CPUs */
  78
  79 static const char name_s3c6400[] = "S3C6400";
  80 static const char name_s3c6410[] = "S3C6410";
  81
  82 static struct cpu_table cpu_ids[] __initdata = {
  83         {
  84                 .idcode         = S3C6400_CPU_ID,
  85                 .idmask         = S3C64XX_CPU_MASK,
  86                 .map_io         = s3c6400_map_io,
  87                 .init_uarts     = s3c64xx_init_uarts,
  88                 .init           = s3c6400_init,
  89                 .name           = name_s3c6400,
  90         }, {
  91                 .idcode         = S3C6410_CPU_ID,
  92                 .idmask         = S3C64XX_CPU_MASK,
  93                 .map_io         = s3c6410_map_io,
  94                 .init_uarts     = s3c64xx_init_uarts,
  95                 .init           = s3c6410_init,
  96                 .name           = name_s3c6410,
  97         },
  98 };
  99
 100 /* minimal IO mapping */
 101
 102 /* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
 103 #define UART_OFFS (S3C_PA_UART & 0xfffff)
 104
 105 static struct map_desc s3c_iodesc[] __initdata = {
 106         {
 107                 .virtual        = (unsigned long)S3C_VA_SYS,
 108                 .pfn            = __phys_to_pfn(S3C64XX_PA_SYSCON),
 109                 .length         = SZ_4K,
 110                 .type           = MT_DEVICE,
 111         }, {
 112                 .virtual        = (unsigned long)S3C_VA_MEM,
 113                 .pfn            = __phys_to_pfn(S3C64XX_PA_SROM),
 114                 .length         = SZ_4K,
 115                 .type           = MT_DEVICE,
 116         }, {
 117                 .virtual        = (unsigned long)(S3C_VA_UART + UART_OFFS),
 118                 .pfn            = __phys_to_pfn(S3C_PA_UART),
 119                 .length         = SZ_4K,
 120                 .type           = MT_DEVICE,
 121         }, {
 122                 .virtual        = (unsigned long)VA_VIC0,
 123                 .pfn            = __phys_to_pfn(S3C64XX_PA_VIC0),
 124                 .length         = SZ_16K,
 125                 .type           = MT_DEVICE,
 126         }, {
 127                 .virtual        = (unsigned long)VA_VIC1,
 128                 .pfn            = __phys_to_pfn(S3C64XX_PA_VIC1),
 129                 .length         = SZ_16K,
 130                 .type           = MT_DEVICE,
 131         }, {
 132                 .virtual        = (unsigned long)S3C_VA_TIMER,
 133                 .pfn            = __phys_to_pfn(S3C_PA_TIMER),
 134                 .length         = SZ_16K,
 135                 .type           = MT_DEVICE,
 136         }, {
 137                 .virtual        = (unsigned long)S3C64XX_VA_GPIO,
 138                 .pfn            = __phys_to_pfn(S3C64XX_PA_GPIO),
 139                 .length         = SZ_4K,
 140                 .type           = MT_DEVICE,
 141         }, {
 142                 .virtual        = (unsigned long)S3C64XX_VA_MODEM,
 143                 .pfn            = __phys_to_pfn(S3C64XX_PA_MODEM),
 144                 .length         = SZ_4K,
 145                 .type           = MT_DEVICE,
 146         }, {
 147                 .virtual        = (unsigned long)S3C_VA_WATCHDOG,
 148                 .pfn            = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 149                 .length         = SZ_4K,
 150                 .type           = MT_DEVICE,
 151         }, {
 152                 .virtual        = (unsigned long)S3C_VA_USB_HSPHY,
 153                 .pfn            = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
 154                 .length         = SZ_1K,
 155                 .type           = MT_DEVICE,
 156         },
 157 };
 158
 159 static struct bus_type s3c64xx_subsys = {
 160         .name           = "s3c64xx-core",
 161         .dev_name       = "s3c64xx-core",
 162 };
 163
 164 static struct device s3c64xx_dev = {
 165         .bus    = &s3c64xx_subsys,
 166 };
 167
 168 static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 169         .bits           = 32,
 170         .div_base       = 0,
 171         .has_tint_cstat = true,
 172         .tclk_mask      = (1 << 7) | (1 << 6) | (1 << 5),
 173 };
 174
 175 void __init samsung_set_timer_source(unsigned int event, unsigned int source)
 176 {
 177         s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
 178         s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
 179 }
 180
 181 void __init samsung_timer_init(void)
 182 {
 183         unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
 184                 IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
 185                 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
 186         };
 187
 188         samsung_pwm_clocksource_init(S3C_VA_TIMER,
 189                                         timer_irqs, &s3c64xx_pwm_variant);
 190 }
 191
 192 /* read cpu identification code */
 193
 194 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 195 {
 196         /* initialise the io descriptors we need for initialisation */
 197         iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 198         iotable_init(mach_desc, size);
 199
 200         /* detect cpu id */
 201         s3c64xx_init_cpu();
 202
 203         s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 204
 205         samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
 206 }
 207
 208 static __init int s3c64xx_dev_init(void)
 209 {
 210         /* Not applicable when using DT. */
 211         if (of_have_populated_dt())
 212                 return 0;
 213
 214         subsys_system_register(&s3c64xx_subsys, NULL);
 215         return device_register(&s3c64xx_dev);
 216 }
 217 core_initcall(s3c64xx_dev_init);
 218
 219 /*
 220  * setup the sources the vic should advertise resume
 221  * for, even though it is not doing the wake
 222  * (set_irq_wake needs to be valid)
 223  */
 224 #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
 225 #define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
 226                          1 << (IRQ_PENDN - IRQ_VIC1_BASE) |     \
 227                          1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |    \
 228                          1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |    \
 229                          1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
 230
 231 void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 232 {
 233         /*
 234          * FIXME: there is no better place to put this at the moment
 235          * (s3c64xx_clk_init needs ioremap and must happen before init_time
 236          * samsung_wdt_reset_init needs clocks)
 237          */
 238         s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 239         samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 240
 241         printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 242
 243         /* initialise the pair of VICs */
 244         vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
 245         vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
 246 }
 247
 248 #define eint_offset(irq)        ((irq) - IRQ_EINT(0))
 249 #define eint_irq_to_bit(irq)    ((u32)(1 << eint_offset(irq)))
 250
 251 static inline void s3c_irq_eint_mask(struct irq_data *data)
 252 {
 253         u32 mask;
 254
 255         mask = __raw_readl(S3C64XX_EINT0MASK);
 256         mask |= (u32)data->chip_data;
 257         __raw_writel(mask, S3C64XX_EINT0MASK);
 258 }
 259
 260 static void s3c_irq_eint_unmask(struct irq_data *data)
 261 {
 262         u32 mask;
 263
 264         mask = __raw_readl(S3C64XX_EINT0MASK);
 265         mask &= ~((u32)data->chip_data);
 266         __raw_writel(mask, S3C64XX_EINT0MASK);
 267 }
 268
 269 static inline void s3c_irq_eint_ack(struct irq_data *data)
 270 {
 271         __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
 272 }
 273
 274 static void s3c_irq_eint_maskack(struct irq_data *data)
 275 {
 276         /* compiler should in-line these */
 277         s3c_irq_eint_mask(data);
 278         s3c_irq_eint_ack(data);
 279 }
 280
 281 static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
 282 {
 283         int offs = eint_offset(data->irq);
 284         int pin, pin_val;
 285         int shift;
 286         u32 ctrl, mask;
 287         u32 newvalue = 0;
 288         void __iomem *reg;
 289
 290         if (offs > 27)
 291                 return -EINVAL;
 292
 293         if (offs <= 15)
 294                 reg = S3C64XX_EINT0CON0;
 295         else
 296                 reg = S3C64XX_EINT0CON1;
 297
 298         switch (type) {
 299         case IRQ_TYPE_NONE:
 300                 printk(KERN_WARNING "No edge setting!\n");
 301                 break;
 302
 303         case IRQ_TYPE_EDGE_RISING:
 304                 newvalue = S3C2410_EXTINT_RISEEDGE;
 305                 break;
 306
 307         case IRQ_TYPE_EDGE_FALLING:
 308                 newvalue = S3C2410_EXTINT_FALLEDGE;
 309                 break;
 310
 311         case IRQ_TYPE_EDGE_BOTH:
 312                 newvalue = S3C2410_EXTINT_BOTHEDGE;
 313                 break;
 314
 315         case IRQ_TYPE_LEVEL_LOW:
 316                 newvalue = S3C2410_EXTINT_LOWLEV;
 317                 break;
 318
 319         case IRQ_TYPE_LEVEL_HIGH:
 320                 newvalue = S3C2410_EXTINT_HILEV;
 321                 break;
 322
 323         default:
 324                 printk(KERN_ERR "No such irq type %d", type);
 325                 return -1;
 326         }
 327
 328         if (offs <= 15)
 329                 shift = (offs / 2) * 4;
 330         else
 331                 shift = ((offs - 16) / 2) * 4;
 332         mask = 0x7 << shift;
 333
 334         ctrl = __raw_readl(reg);
 335         ctrl &= ~mask;
 336         ctrl |= newvalue << shift;
 337         __raw_writel(ctrl, reg);
 338
 339         /* set the GPIO pin appropriately */
 340
 341         if (offs < 16) {
 342                 pin = S3C64XX_GPN(offs);
 343                 pin_val = S3C_GPIO_SFN(2);
 344         } else if (offs < 23) {
 345                 pin = S3C64XX_GPL(offs + 8 - 16);
 346                 pin_val = S3C_GPIO_SFN(3);
 347         } else {
 348                 pin = S3C64XX_GPM(offs - 23);
 349                 pin_val = S3C_GPIO_SFN(3);
 350         }
 351
 352         s3c_gpio_cfgpin(pin, pin_val);
 353
 354         return 0;
 355 }
 356
 357 static struct irq_chip s3c_irq_eint = {
 358         .name           = "s3c-eint",
 359         .irq_mask       = s3c_irq_eint_mask,
 360         .irq_unmask     = s3c_irq_eint_unmask,
 361         .irq_mask_ack   = s3c_irq_eint_maskack,
 362         .irq_ack        = s3c_irq_eint_ack,
 363         .irq_set_type   = s3c_irq_eint_set_type,
 364         .irq_set_wake   = s3c_irqext_wake,
 365 };
 366
 367 /* s3c_irq_demux_eint
 368  *
 369  * This function demuxes the IRQ from the group0 external interrupts,
 370  * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
 371  * the specific handlers s3c_irq_demux_eintX_Y.
 372  */
 373 static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
 374 {
 375         u32 status = __raw_readl(S3C64XX_EINT0PEND);
 376         u32 mask = __raw_readl(S3C64XX_EINT0MASK);
 377         unsigned int irq;
 378
 379         status &= ~mask;
 380         status >>= start;
 381         status &= (1 << (end - start + 1)) - 1;
 382
 383         for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
 384                 if (status & 1)
 385                         generic_handle_irq(irq);
 386
 387                 status >>= 1;
 388         }
 389 }
 390
 391 static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
 392 {
 393         s3c_irq_demux_eint(0, 3);
 394 }
 395
 396 static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
 397 {
 398         s3c_irq_demux_eint(4, 11);
 399 }
 400
 401 static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
 402 {
 403         s3c_irq_demux_eint(12, 19);
 404 }
 405
 406 static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
 407 {
 408         s3c_irq_demux_eint(20, 27);
 409 }
 410
 411 static int __init s3c64xx_init_irq_eint(void)
 412 {
 413         int irq;
 414
 415         /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
 416         if (of_have_populated_dt())
 417                 return -ENODEV;
 418
 419         for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 420                 irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 421                 irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
 422                 irq_clear_status_flags(irq, IRQ_NOREQUEST);
 423         }
 424
 425         irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
 426         irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
 427         irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
 428         irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
 429
 430         return 0;
 431 }
 432 arch_initcall(s3c64xx_init_irq_eint);
 433
 434 void s3c64xx_restart(enum reboot_mode mode, const char *cmd)
 435 {
 436         if (mode != REBOOT_SOFT)
 437                 samsung_wdt_reset();
 438
 439         /* if all else fails, or mode was for soft, jump to 0 */
 440         soft_restart(0);
 441 }