2 * linux/arch/arm/mach-sa1100/cerf.c
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
8 * Apr-2003 : Removed some old PDA crud [FB]
9 * Oct-2003 : Added uart2 resource [FB]
10 * Jan-2004 : Removed io map for flash [FB]
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/tty.h>
16 #include <linux/platform_device.h>
17 #include <linux/irq.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/partitions.h>
21 #include <mach/hardware.h>
22 #include <asm/setup.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/flash.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/serial_sa1100.h>
30 #include <mach/cerf.h>
32 #include <mach/irqs.h>
35 static struct resource cerfuart2_resources
[] = {
36 [0] = DEFINE_RES_MEM(0x80030000, SZ_64K
),
39 static struct platform_device cerfuart2_device
= {
40 .name
= "sa11x0-uart",
42 .num_resources
= ARRAY_SIZE(cerfuart2_resources
),
43 .resource
= cerfuart2_resources
,
46 static struct platform_device
*cerf_devices
[] __initdata
= {
50 #ifdef CONFIG_SA1100_CERF_FLASH_32MB
51 # define CERF_FLASH_SIZE 0x02000000
52 #elif defined CONFIG_SA1100_CERF_FLASH_16MB
53 # define CERF_FLASH_SIZE 0x01000000
54 #elif defined CONFIG_SA1100_CERF_FLASH_8MB
55 # define CERF_FLASH_SIZE 0x00800000
57 # error "Undefined flash size for CERF"
60 static struct mtd_partition cerf_partitions
[] = {
75 .size
= CERF_FLASH_SIZE
-0x00160000,
80 static struct flash_platform_data cerf_flash_data
= {
81 .map_name
= "cfi_probe",
82 .parts
= cerf_partitions
,
83 .nr_parts
= ARRAY_SIZE(cerf_partitions
),
86 static struct resource cerf_flash_resource
=
87 DEFINE_RES_MEM(SA1100_CS0_PHYS
, SZ_32M
);
89 static void __init
cerf_init_irq(void)
92 irq_set_irq_type(CERF_ETH_IRQ
, IRQ_TYPE_EDGE_RISING
);
95 static struct map_desc cerf_io_desc
[] __initdata
= {
96 { /* Crystal Ethernet Chip */
97 .virtual = 0xf0000000,
98 .pfn
= __phys_to_pfn(0x08000000),
104 static void __init
cerf_map_io(void)
107 iotable_init(cerf_io_desc
, ARRAY_SIZE(cerf_io_desc
));
109 sa1100_register_uart(0, 3);
110 sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
111 sa1100_register_uart(2, 1);
113 /* set some GPDR bits here while it's safe */
114 GPDR
|= CERF_GPIO_CF_RESET
;
117 static struct mcp_plat_data cerf_mcp_data
= {
119 .sclk_rate
= 11981000,
122 static void __init
cerf_init(void)
124 sa11x0_ppc_configure_mcp();
125 platform_add_devices(cerf_devices
, ARRAY_SIZE(cerf_devices
));
126 sa11x0_register_mtd(&cerf_flash_data
, &cerf_flash_resource
, 1);
127 sa11x0_register_mcp(&cerf_mcp_data
);
130 MACHINE_START(CERF
, "Intrinsyc CerfBoard/CerfCube")
131 /* Maintainer: support@intrinsyc.com */
132 .map_io
= cerf_map_io
,
133 .nr_irqs
= SA1100_NR_IRQS
,
134 .init_irq
= cerf_init_irq
,
135 .timer
= &sa1100_timer
,
136 .init_machine
= cerf_init
,
137 .init_late
= sa11x0_init_late
,
138 .restart
= sa11x0_restart
,