Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/oom' and 'asoc/topic...

[mirror_ubuntu-artful-kernel.git] / arch / arm / mm / cache-l2x0.c

/*
 * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
 *
 * Copyright (C) 2007 ARM Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>

#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/hardware/cache-l2x0.h>
#include "cache-tauros3.h"
#include "cache-aurora-l2.h"

struct l2c_init_data {
        const char *type;
        unsigned way_size_0;
        unsigned num_lock;
        void (*of_parse)(const struct device_node *, u32 *, u32 *);
        void (*enable)(void __iomem *, u32, unsigned);
        void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
        void (*save)(void __iomem *);
        struct outer_cache_fns outer_cache;
};

#define CACHE_LINE_SIZE         32

static void __iomem *l2x0_base;
static DEFINE_RAW_SPINLOCK(l2x0_lock);
static u32 l2x0_way_mask;       /* Bitmask of active ways */
static u32 l2x0_size;
static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;

struct l2x0_regs l2x0_saved_regs;

/*
 * Common code for all cache controllers.
 */
static inline void l2c_wait_mask(void __iomem *reg, unsigned long mask)
{
        /* wait for cache operation by line or way to complete */
        while (readl_relaxed(reg) & mask)
                cpu_relax();
}

/*
 * By default, we write directly to secure registers.  Platforms must
 * override this if they are running non-secure.
 */
static void l2c_write_sec(unsigned long val, void __iomem *base, unsigned reg)
{
        if (val == readl_relaxed(base + reg))
                return;
        if (outer_cache.write_sec)
                outer_cache.write_sec(val, reg);
        else
                writel_relaxed(val, base + reg);
}

/*
 * This should only be called when we have a requirement that the
 * register be written due to a work-around, as platforms running
 * in non-secure mode may not be able to access this register.
 */
static inline void l2c_set_debug(void __iomem *base, unsigned long val)
{
        l2c_write_sec(val, base, L2X0_DEBUG_CTRL);
}

static void __l2c_op_way(void __iomem *reg)
{
        writel_relaxed(l2x0_way_mask, reg);
        l2c_wait_mask(reg, l2x0_way_mask);
}

static inline void l2c_unlock(void __iomem *base, unsigned num)
{
        unsigned i;

        for (i = 0; i < num; i++) {
                writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_D_BASE +
                               i * L2X0_LOCKDOWN_STRIDE);
                writel_relaxed(0, base + L2X0_LOCKDOWN_WAY_I_BASE +
                               i * L2X0_LOCKDOWN_STRIDE);
        }
}

/*
 * Enable the L2 cache controller.  This function must only be
 * called when the cache controller is known to be disabled.
 */
static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
        unsigned long flags;

        l2c_write_sec(aux, base, L2X0_AUX_CTRL);

        l2c_unlock(base, num_lock);

        local_irq_save(flags);
        __l2c_op_way(base + L2X0_INV_WAY);
        writel_relaxed(0, base + sync_reg_offset);
        l2c_wait_mask(base + sync_reg_offset, 1);
        local_irq_restore(flags);

        l2c_write_sec(L2X0_CTRL_EN, base, L2X0_CTRL);
}

static void l2c_disable(void)
{
        void __iomem *base = l2x0_base;

        outer_cache.flush_all();
        l2c_write_sec(0, base, L2X0_CTRL);
        dsb(st);
}

#ifdef CONFIG_CACHE_PL310
static inline void cache_wait(void __iomem *reg, unsigned long mask)
{
        /* cache operations by line are atomic on PL310 */
}
#else
#define cache_wait      l2c_wait_mask
#endif

static inline void cache_sync(void)
{
        void __iomem *base = l2x0_base;

        writel_relaxed(0, base + sync_reg_offset);
        cache_wait(base + L2X0_CACHE_SYNC, 1);
}

#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
static inline void debug_writel(unsigned long val)
{
        l2c_set_debug(l2x0_base, val);
}
#else
/* Optimised out for non-errata case */
static inline void debug_writel(unsigned long val)
{
}
#endif

static void l2x0_cache_sync(void)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        cache_sync();
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void __l2x0_flush_all(void)
{
        debug_writel(0x03);
        __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY);
        cache_sync();
        debug_writel(0x00);
}

static void l2x0_flush_all(void)
{
        unsigned long flags;

        /* clean all ways */
        raw_spin_lock_irqsave(&l2x0_lock, flags);
        __l2x0_flush_all();
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2x0_disable(void)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        __l2x0_flush_all();
        l2c_write_sec(0, l2x0_base, L2X0_CTRL);
        dsb(st);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2c_save(void __iomem *base)
{
        l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
}

/*
 * L2C-210 specific code.
 *
 * The L2C-2x0 PA, set/way and sync operations are atomic, but we must
 * ensure that no background operation is running.  The way operations
 * are all background tasks.
 *
 * While a background operation is in progress, any new operation is
 * ignored (unspecified whether this causes an error.)  Thankfully, not
 * used on SMP.
 *
 * Never has a different sync register other than L2X0_CACHE_SYNC, but
 * we use sync_reg_offset here so we can share some of this with L2C-310.
 */
static void __l2c210_cache_sync(void __iomem *base)
{
        writel_relaxed(0, base + sync_reg_offset);
}

static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
        unsigned long end)
{
        while (start < end) {
                writel_relaxed(start, reg);
                start += CACHE_LINE_SIZE;
        }
}

static void l2c210_inv_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;

        if (start & (CACHE_LINE_SIZE - 1)) {
                start &= ~(CACHE_LINE_SIZE - 1);
                writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
                start += CACHE_LINE_SIZE;
        }

        if (end & (CACHE_LINE_SIZE - 1)) {
                end &= ~(CACHE_LINE_SIZE - 1);
                writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
        }

        __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
        __l2c210_cache_sync(base);
}

static void l2c210_clean_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;

        start &= ~(CACHE_LINE_SIZE - 1);
        __l2c210_op_pa_range(base + L2X0_CLEAN_LINE_PA, start, end);
        __l2c210_cache_sync(base);
}

static void l2c210_flush_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;

        start &= ~(CACHE_LINE_SIZE - 1);
        __l2c210_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA, start, end);
        __l2c210_cache_sync(base);
}

static void l2c210_flush_all(void)
{
        void __iomem *base = l2x0_base;

        BUG_ON(!irqs_disabled());

        __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
        __l2c210_cache_sync(base);
}

static void l2c210_sync(void)
{
        __l2c210_cache_sync(l2x0_base);
}

static void l2c210_resume(void)
{
        void __iomem *base = l2x0_base;

        if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
                l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1);
}

static const struct l2c_init_data l2c210_data __initconst = {
        .type = "L2C-210",
        .way_size_0 = SZ_8K,
        .num_lock = 1,
        .enable = l2c_enable,
        .save = l2c_save,
        .outer_cache = {
                .inv_range = l2c210_inv_range,
                .clean_range = l2c210_clean_range,
                .flush_range = l2c210_flush_range,
                .flush_all = l2c210_flush_all,
                .disable = l2c_disable,
                .sync = l2c210_sync,
                .resume = l2c210_resume,
        },
};

/*
 * L2C-220 specific code.
 *
 * All operations are background operations: they have to be waited for.
 * Conflicting requests generate a slave error (which will cause an
 * imprecise abort.)  Never uses sync_reg_offset, so we hard-code the
 * sync register here.
 *
 * However, we can re-use the l2c210_resume call.
 */
static inline void __l2c220_cache_sync(void __iomem *base)
{
        writel_relaxed(0, base + L2X0_CACHE_SYNC);
        l2c_wait_mask(base + L2X0_CACHE_SYNC, 1);
}

static void l2c220_op_way(void __iomem *base, unsigned reg)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        __l2c_op_way(base + reg);
        __l2c220_cache_sync(base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
        unsigned long end, unsigned long flags)
{
        raw_spinlock_t *lock = &l2x0_lock;

        while (start < end) {
                unsigned long blk_end = start + min(end - start, 4096UL);

                while (start < blk_end) {
                        l2c_wait_mask(reg, 1);
                        writel_relaxed(start, reg);
                        start += CACHE_LINE_SIZE;
                }

                if (blk_end < end) {
                        raw_spin_unlock_irqrestore(lock, flags);
                        raw_spin_lock_irqsave(lock, flags);
                }
        }

        return flags;
}

static void l2c220_inv_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        if ((start | end) & (CACHE_LINE_SIZE - 1)) {
                if (start & (CACHE_LINE_SIZE - 1)) {
                        start &= ~(CACHE_LINE_SIZE - 1);
                        writel_relaxed(start, base + L2X0_CLEAN_INV_LINE_PA);
                        start += CACHE_LINE_SIZE;
                }

                if (end & (CACHE_LINE_SIZE - 1)) {
                        end &= ~(CACHE_LINE_SIZE - 1);
                        l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
                        writel_relaxed(end, base + L2X0_CLEAN_INV_LINE_PA);
                }
        }

        flags = l2c220_op_pa_range(base + L2X0_INV_LINE_PA,
                                   start, end, flags);
        l2c_wait_mask(base + L2X0_INV_LINE_PA, 1);
        __l2c220_cache_sync(base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2c220_clean_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;
        unsigned long flags;

        start &= ~(CACHE_LINE_SIZE - 1);
        if ((end - start) >= l2x0_size) {
                l2c220_op_way(base, L2X0_CLEAN_WAY);
                return;
        }

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        flags = l2c220_op_pa_range(base + L2X0_CLEAN_LINE_PA,
                                   start, end, flags);
        l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
        __l2c220_cache_sync(base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2c220_flush_range(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;
        unsigned long flags;

        start &= ~(CACHE_LINE_SIZE - 1);
        if ((end - start) >= l2x0_size) {
                l2c220_op_way(base, L2X0_CLEAN_INV_WAY);
                return;
        }

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        flags = l2c220_op_pa_range(base + L2X0_CLEAN_INV_LINE_PA,
                                   start, end, flags);
        l2c_wait_mask(base + L2X0_CLEAN_INV_LINE_PA, 1);
        __l2c220_cache_sync(base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2c220_flush_all(void)
{
        l2c220_op_way(l2x0_base, L2X0_CLEAN_INV_WAY);
}

static void l2c220_sync(void)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        __l2c220_cache_sync(l2x0_base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
        /*
         * Always enable non-secure access to the lockdown registers -
         * we write to them as part of the L2C enable sequence so they
         * need to be accessible.
         */
        aux |= L220_AUX_CTRL_NS_LOCKDOWN;

        l2c_enable(base, aux, num_lock);
}

static const struct l2c_init_data l2c220_data = {
        .type = "L2C-220",
        .way_size_0 = SZ_8K,
        .num_lock = 1,
        .enable = l2c220_enable,
        .save = l2c_save,
        .outer_cache = {
                .inv_range = l2c220_inv_range,
                .clean_range = l2c220_clean_range,
                .flush_range = l2c220_flush_range,
                .flush_all = l2c220_flush_all,
                .disable = l2c_disable,
                .sync = l2c220_sync,
                .resume = l2c210_resume,
        },
};

/*
 * L2C-310 specific code.
 *
 * Very similar to L2C-210, the PA, set/way and sync operations are atomic,
 * and the way operations are all background tasks.  However, issuing an
 * operation while a background operation is in progress results in a
 * SLVERR response.  We can reuse:
 *
 *  __l2c210_cache_sync (using sync_reg_offset)
 *  l2c210_sync
 *  l2c210_inv_range (if 588369 is not applicable)
 *  l2c210_clean_range
 *  l2c210_flush_range (if 588369 is not applicable)
 *  l2c210_flush_all (if 727915 is not applicable)
 *
 * Errata:
 * 588369: PL310 R0P0->R1P0, fixed R2P0.
 *      Affects: all clean+invalidate operations
 *      clean and invalidate skips the invalidate step, so we need to issue
 *      separate operations.  We also require the above debug workaround
 *      enclosing this code fragment on affected parts.  On unaffected parts,
 *      we must not use this workaround without the debug register writes
 *      to avoid exposing a problem similar to 727915.
 *
 * 727915: PL310 R2P0->R3P0, fixed R3P1.
 *      Affects: clean+invalidate by way
 *      clean and invalidate by way runs in the background, and a store can
 *      hit the line between the clean operation and invalidate operation,
 *      resulting in the store being lost.
 *
 * 752271: PL310 R3P0->R3P1-50REL0, fixed R3P2.
 *      Affects: 8x64-bit (double fill) line fetches
 *      double fill line fetches can fail to cause dirty data to be evicted
 *      from the cache before the new data overwrites the second line.
 *
 * 753970: PL310 R3P0, fixed R3P1.
 *      Affects: sync
 *      prevents merging writes after the sync operation, until another L2C
 *      operation is performed (or a number of other conditions.)
 *
 * 769419: PL310 R0P0->R3P1, fixed R3P2.
 *      Affects: store buffer
 *      store buffer is not automatically drained.
 */
static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
{
        void __iomem *base = l2x0_base;

        if ((start | end) & (CACHE_LINE_SIZE - 1)) {
                unsigned long flags;

                /* Erratum 588369 for both clean+invalidate operations */
                raw_spin_lock_irqsave(&l2x0_lock, flags);
                l2c_set_debug(base, 0x03);

                if (start & (CACHE_LINE_SIZE - 1)) {
                        start &= ~(CACHE_LINE_SIZE - 1);
                        writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
                        writel_relaxed(start, base + L2X0_INV_LINE_PA);
                        start += CACHE_LINE_SIZE;
                }

                if (end & (CACHE_LINE_SIZE - 1)) {
                        end &= ~(CACHE_LINE_SIZE - 1);
                        writel_relaxed(end, base + L2X0_CLEAN_LINE_PA);
                        writel_relaxed(end, base + L2X0_INV_LINE_PA);
                }

                l2c_set_debug(base, 0x00);
                raw_spin_unlock_irqrestore(&l2x0_lock, flags);
        }

        __l2c210_op_pa_range(base + L2X0_INV_LINE_PA, start, end);
        __l2c210_cache_sync(base);
}

static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
{
        raw_spinlock_t *lock = &l2x0_lock;
        unsigned long flags;
        void __iomem *base = l2x0_base;

        raw_spin_lock_irqsave(lock, flags);
        while (start < end) {
                unsigned long blk_end = start + min(end - start, 4096UL);

                l2c_set_debug(base, 0x03);
                while (start < blk_end) {
                        writel_relaxed(start, base + L2X0_CLEAN_LINE_PA);
                        writel_relaxed(start, base + L2X0_INV_LINE_PA);
                        start += CACHE_LINE_SIZE;
                }
                l2c_set_debug(base, 0x00);

                if (blk_end < end) {
                        raw_spin_unlock_irqrestore(lock, flags);
                        raw_spin_lock_irqsave(lock, flags);
                }
        }
        raw_spin_unlock_irqrestore(lock, flags);
        __l2c210_cache_sync(base);
}

static void l2c310_flush_all_erratum(void)
{
        void __iomem *base = l2x0_base;
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        l2c_set_debug(base, 0x03);
        __l2c_op_way(base + L2X0_CLEAN_INV_WAY);
        l2c_set_debug(base, 0x00);
        __l2c210_cache_sync(base);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}

static void __init l2c310_save(void __iomem *base)
{
        unsigned revision;

        l2c_save(base);

        l2x0_saved_regs.tag_latency = readl_relaxed(base +
                L310_TAG_LATENCY_CTRL);
        l2x0_saved_regs.data_latency = readl_relaxed(base +
                L310_DATA_LATENCY_CTRL);
        l2x0_saved_regs.filter_end = readl_relaxed(base +
                L310_ADDR_FILTER_END);
        l2x0_saved_regs.filter_start = readl_relaxed(base +
                L310_ADDR_FILTER_START);

        revision = readl_relaxed(base + L2X0_CACHE_ID) &
                        L2X0_CACHE_ID_RTL_MASK;

        /* From r2p0, there is Prefetch offset/control register */
        if (revision >= L310_CACHE_ID_RTL_R2P0)
                l2x0_saved_regs.prefetch_ctrl = readl_relaxed(base +
                                                        L310_PREFETCH_CTRL);

        /* From r3p0, there is Power control register */
        if (revision >= L310_CACHE_ID_RTL_R3P0)
                l2x0_saved_regs.pwr_ctrl = readl_relaxed(base +
                                                        L310_POWER_CTRL);
}

static void l2c310_resume(void)
{
        void __iomem *base = l2x0_base;

        if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
                unsigned revision;

                /* restore pl310 setup */
                writel_relaxed(l2x0_saved_regs.tag_latency,
                               base + L310_TAG_LATENCY_CTRL);
                writel_relaxed(l2x0_saved_regs.data_latency,
                               base + L310_DATA_LATENCY_CTRL);
                writel_relaxed(l2x0_saved_regs.filter_end,
                               base + L310_ADDR_FILTER_END);
                writel_relaxed(l2x0_saved_regs.filter_start,
                               base + L310_ADDR_FILTER_START);

                revision = readl_relaxed(base + L2X0_CACHE_ID) &
                                L2X0_CACHE_ID_RTL_MASK;

                if (revision >= L310_CACHE_ID_RTL_R2P0)
                        l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base,
                                      L310_PREFETCH_CTRL);
                if (revision >= L310_CACHE_ID_RTL_R3P0)
                        l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base,
                                      L310_POWER_CTRL);

                l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);

                /* Re-enable full-line-of-zeros for Cortex-A9 */
                if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
                        set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
        }
}

static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data)
{
        switch (act & ~CPU_TASKS_FROZEN) {
        case CPU_STARTING:
                set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
                break;
        case CPU_DYING:
                set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));
                break;
        }
        return NOTIFY_OK;
}

static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
        unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
        bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;

        if (rev >= L310_CACHE_ID_RTL_R2P0) {
                if (cortex_a9) {
                        aux |= L310_AUX_CTRL_EARLY_BRESP;
                        pr_info("L2C-310 enabling early BRESP for Cortex-A9\n");
                } else if (aux & L310_AUX_CTRL_EARLY_BRESP) {
                        pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");
                        aux &= ~L310_AUX_CTRL_EARLY_BRESP;
                }
        }

        if (cortex_a9) {
                u32 aux_cur = readl_relaxed(base + L2X0_AUX_CTRL);
                u32 acr = get_auxcr();

                pr_debug("Cortex-A9 ACR=0x%08x\n", acr);

                if (acr & BIT(3) && !(aux_cur & L310_AUX_CTRL_FULL_LINE_ZERO))
                        pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");

                if (aux & L310_AUX_CTRL_FULL_LINE_ZERO && !(acr & BIT(3)))
                        pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");

                if (!(aux & L310_AUX_CTRL_FULL_LINE_ZERO) && !outer_cache.write_sec) {
                        aux |= L310_AUX_CTRL_FULL_LINE_ZERO;
                        pr_info("L2C-310 full line of zeros enabled for Cortex-A9\n");
                }
        } else if (aux & (L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP)) {
                pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");
                aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP);
        }

        if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) {
                u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL);

                pr_info("L2C-310 %s%s prefetch enabled, offset %u lines\n",
                        aux & L310_AUX_CTRL_INSTR_PREFETCH ? "I" : "",
                        aux & L310_AUX_CTRL_DATA_PREFETCH ? "D" : "",
                        1 + (prefetch & L310_PREFETCH_CTRL_OFFSET_MASK));
        }

        /* r3p0 or later has power control register */
        if (rev >= L310_CACHE_ID_RTL_R3P0) {
                u32 power_ctrl;

                l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN,
                              base, L310_POWER_CTRL);
                power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
                pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
                        power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
                        power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
        }

        /*
         * Always enable non-secure access to the lockdown registers -
         * we write to them as part of the L2C enable sequence so they
         * need to be accessible.
         */
        aux |= L310_AUX_CTRL_NS_LOCKDOWN;

        l2c_enable(base, aux, num_lock);

        if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) {
                set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1));
                cpu_notifier(l2c310_cpu_enable_flz, 0);
        }
}

static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
        struct outer_cache_fns *fns)
{
        unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
        const char *errata[8];
        unsigned n = 0;

        if (IS_ENABLED(CONFIG_PL310_ERRATA_588369) &&
            revision < L310_CACHE_ID_RTL_R2P0 &&
            /* For bcm compatibility */
            fns->inv_range == l2c210_inv_range) {
                fns->inv_range = l2c310_inv_range_erratum;
                fns->flush_range = l2c310_flush_range_erratum;
                errata[n++] = "588369";
        }

        if (IS_ENABLED(CONFIG_PL310_ERRATA_727915) &&
            revision >= L310_CACHE_ID_RTL_R2P0 &&
            revision < L310_CACHE_ID_RTL_R3P1) {
                fns->flush_all = l2c310_flush_all_erratum;
                errata[n++] = "727915";
        }

        if (revision >= L310_CACHE_ID_RTL_R3P0 &&
            revision < L310_CACHE_ID_RTL_R3P2) {
                u32 val = readl_relaxed(base + L310_PREFETCH_CTRL);
                /* I don't think bit23 is required here... but iMX6 does so */
                if (val & (BIT(30) | BIT(23))) {
                        val &= ~(BIT(30) | BIT(23));
                        l2c_write_sec(val, base, L310_PREFETCH_CTRL);
                        errata[n++] = "752271";
                }
        }

        if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
            revision == L310_CACHE_ID_RTL_R3P0) {
                sync_reg_offset = L2X0_DUMMY_REG;
                errata[n++] = "753970";
        }

        if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
                errata[n++] = "769419";

        if (n) {
                unsigned i;

                pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
                for (i = 0; i < n; i++)
                        pr_cont(" %s", errata[i]);
                pr_cont(" enabled\n");
        }
}

static void l2c310_disable(void)
{
        /*
         * If full-line-of-zeros is enabled, we must first disable it in the
         * Cortex-A9 auxiliary control register before disabling the L2 cache.
         */
        if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO)
                set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1)));

        l2c_disable();
}

static const struct l2c_init_data l2c310_init_fns __initconst = {
        .type = "L2C-310",
        .way_size_0 = SZ_8K,
        .num_lock = 8,
        .enable = l2c310_enable,
        .fixup = l2c310_fixup,
        .save = l2c310_save,
        .outer_cache = {
                .inv_range = l2c210_inv_range,
                .clean_range = l2c210_clean_range,
                .flush_range = l2c210_flush_range,
                .flush_all = l2c210_flush_all,
                .disable = l2c310_disable,
                .sync = l2c210_sync,
                .resume = l2c310_resume,
        },
};

static void __init __l2c_init(const struct l2c_init_data *data,
        u32 aux_val, u32 aux_mask, u32 cache_id)
{
        struct outer_cache_fns fns;
        unsigned way_size_bits, ways;
        u32 aux, old_aux;

        /*
         * Sanity check the aux values.  aux_mask is the bits we preserve
         * from reading the hardware register, and aux_val is the bits we
         * set.
         */
        if (aux_val & aux_mask)
                pr_alert("L2C: platform provided aux values permit register corruption.\n");

        old_aux = aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
        aux &= aux_mask;
        aux |= aux_val;

        if (old_aux != aux)
                pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",
                        old_aux, aux);

        /* Determine the number of ways */
        switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
        case L2X0_CACHE_ID_PART_L310:
                if ((aux_val | ~aux_mask) & (L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_ASSOCIATIVITY_16))
                        pr_warn("L2C: DT/platform tries to modify or specify cache size\n");
                if (aux & (1 << 16))
                        ways = 16;
                else
                        ways = 8;
                break;

        case L2X0_CACHE_ID_PART_L210:
        case L2X0_CACHE_ID_PART_L220:
                ways = (aux >> 13) & 0xf;
                break;

        case AURORA_CACHE_ID:
                ways = (aux >> 13) & 0xf;
                ways = 2 << ((ways + 1) >> 2);
                break;

        default:
                /* Assume unknown chips have 8 ways */
                ways = 8;
                break;
        }

        l2x0_way_mask = (1 << ways) - 1;

        /*
         * way_size_0 is the size that a way_size value of zero would be
         * given the calculation: way_size = way_size_0 << way_size_bits.
         * So, if way_size_bits=0 is reserved, but way_size_bits=1 is 16k,
         * then way_size_0 would be 8k.
         *
         * L2 cache size = number of ways * way size.
         */
        way_size_bits = (aux & L2C_AUX_CTRL_WAY_SIZE_MASK) >>
                        L2C_AUX_CTRL_WAY_SIZE_SHIFT;
        l2x0_size = ways * (data->way_size_0 << way_size_bits);

        fns = data->outer_cache;
        fns.write_sec = outer_cache.write_sec;
        if (data->fixup)
                data->fixup(l2x0_base, cache_id, &fns);

        /*
         * Check if l2x0 controller is already enabled.  If we are booting
         * in non-secure mode accessing the below registers will fault.
         */
        if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
                data->enable(l2x0_base, aux, data->num_lock);

        outer_cache = fns;

        /*
         * It is strange to save the register state before initialisation,
         * but hey, this is what the DT implementations decided to do.
         */
        if (data->save)
                data->save(l2x0_base);

        /* Re-read it in case some bits are reserved. */
        aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);

        pr_info("%s cache controller enabled, %d ways, %d kB\n",
                data->type, ways, l2x0_size >> 10);
        pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
                data->type, cache_id, aux);
}

void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
{
        const struct l2c_init_data *data;
        u32 cache_id;

        l2x0_base = base;

        cache_id = readl_relaxed(base + L2X0_CACHE_ID);

        switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
        default:
        case L2X0_CACHE_ID_PART_L210:
                data = &l2c210_data;
                break;

        case L2X0_CACHE_ID_PART_L220:
                data = &l2c220_data;
                break;

        case L2X0_CACHE_ID_PART_L310:
                data = &l2c310_init_fns;
                break;
        }

        __l2c_init(data, aux_val, aux_mask, cache_id);
}

#ifdef CONFIG_OF
static int l2_wt_override;

/* Aurora don't have the cache ID register available, so we have to
 * pass it though the device tree */
static u32 cache_id_part_number_from_dt;

static void __init l2x0_of_parse(const struct device_node *np,
                                 u32 *aux_val, u32 *aux_mask)
{
        u32 data[2] = { 0, 0 };
        u32 tag = 0;
        u32 dirty = 0;
        u32 val = 0, mask = 0;

        of_property_read_u32(np, "arm,tag-latency", &tag);
        if (tag) {
                mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
                val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
        }

        of_property_read_u32_array(np, "arm,data-latency",
                                   data, ARRAY_SIZE(data));
        if (data[0] && data[1]) {
                mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
                        L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
                val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
                       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
        }

        of_property_read_u32(np, "arm,dirty-latency", &dirty);
        if (dirty) {
                mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
                val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
        }

        *aux_val &= ~mask;
        *aux_val |= val;
        *aux_mask &= ~mask;
}

static const struct l2c_init_data of_l2c210_data __initconst = {
        .type = "L2C-210",
        .way_size_0 = SZ_8K,
        .num_lock = 1,
        .of_parse = l2x0_of_parse,
        .enable = l2c_enable,
        .save = l2c_save,
        .outer_cache = {
                .inv_range   = l2c210_inv_range,
                .clean_range = l2c210_clean_range,
                .flush_range = l2c210_flush_range,
                .flush_all   = l2c210_flush_all,
                .disable     = l2c_disable,
                .sync        = l2c210_sync,
                .resume      = l2c210_resume,
        },
};

static const struct l2c_init_data of_l2c220_data __initconst = {
        .type = "L2C-220",
        .way_size_0 = SZ_8K,
        .num_lock = 1,
        .of_parse = l2x0_of_parse,
        .enable = l2c220_enable,
        .save = l2c_save,
        .outer_cache = {
                .inv_range   = l2c220_inv_range,
                .clean_range = l2c220_clean_range,
                .flush_range = l2c220_flush_range,
                .flush_all   = l2c220_flush_all,
                .disable     = l2c_disable,
                .sync        = l2c220_sync,
                .resume      = l2c210_resume,
        },
};

static void __init l2c310_of_parse(const struct device_node *np,
        u32 *aux_val, u32 *aux_mask)
{
        u32 data[3] = { 0, 0, 0 };
        u32 tag[3] = { 0, 0, 0 };
        u32 filter[2] = { 0, 0 };

        of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
        if (tag[0] && tag[1] && tag[2])
                writel_relaxed(
                        L310_LATENCY_CTRL_RD(tag[0] - 1) |
                        L310_LATENCY_CTRL_WR(tag[1] - 1) |
                        L310_LATENCY_CTRL_SETUP(tag[2] - 1),
                        l2x0_base + L310_TAG_LATENCY_CTRL);

        of_property_read_u32_array(np, "arm,data-latency",
                                   data, ARRAY_SIZE(data));
        if (data[0] && data[1] && data[2])
                writel_relaxed(
                        L310_LATENCY_CTRL_RD(data[0] - 1) |
                        L310_LATENCY_CTRL_WR(data[1] - 1) |
                        L310_LATENCY_CTRL_SETUP(data[2] - 1),
                        l2x0_base + L310_DATA_LATENCY_CTRL);

        of_property_read_u32_array(np, "arm,filter-ranges",
                                   filter, ARRAY_SIZE(filter));
        if (filter[1]) {
                writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
                               l2x0_base + L310_ADDR_FILTER_END);
                writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
                               l2x0_base + L310_ADDR_FILTER_START);
        }
}

static const struct l2c_init_data of_l2c310_data __initconst = {
        .type = "L2C-310",
        .way_size_0 = SZ_8K,
        .num_lock = 8,
        .of_parse = l2c310_of_parse,
        .enable = l2c310_enable,
        .fixup = l2c310_fixup,
        .save  = l2c310_save,
        .outer_cache = {
                .inv_range   = l2c210_inv_range,
                .clean_range = l2c210_clean_range,
                .flush_range = l2c210_flush_range,
                .flush_all   = l2c210_flush_all,
                .disable     = l2c310_disable,
                .sync        = l2c210_sync,
                .resume      = l2c310_resume,
        },
};

/*
 * This is a variant of the of_l2c310_data with .sync set to
 * NULL. Outer sync operations are not needed when the system is I/O
 * coherent, and potentially harmful in certain situations (PCIe/PL310
 * deadlock on Armada 375/38x due to hardware I/O coherency). The
 * other operations are kept because they are infrequent (therefore do
 * not cause the deadlock in practice) and needed for secondary CPU
 * boot and other power management activities.
 */
static const struct l2c_init_data of_l2c310_coherent_data __initconst = {
        .type = "L2C-310 Coherent",
        .way_size_0 = SZ_8K,
        .num_lock = 8,
        .of_parse = l2c310_of_parse,
        .enable = l2c310_enable,
        .fixup = l2c310_fixup,
        .save  = l2c310_save,
        .outer_cache = {
                .inv_range   = l2c210_inv_range,
                .clean_range = l2c210_clean_range,
                .flush_range = l2c210_flush_range,
                .flush_all   = l2c210_flush_all,
                .disable     = l2c310_disable,
                .resume      = l2c310_resume,
        },
};

/*
 * Note that the end addresses passed to Linux primitives are
 * noninclusive, while the hardware cache range operations use
 * inclusive start and end addresses.
 */
static unsigned long calc_range_end(unsigned long start, unsigned long end)
{
        /*
         * Limit the number of cache lines processed at once,
         * since cache range operations stall the CPU pipeline
         * until completion.
         */
        if (end > start + MAX_RANGE_SIZE)
                end = start + MAX_RANGE_SIZE;

        /*
         * Cache range operations can't straddle a page boundary.
         */
        if (end > PAGE_ALIGN(start+1))
                end = PAGE_ALIGN(start+1);

        return end;
}

/*
 * Make sure 'start' and 'end' reference the same page, as L2 is PIPT
 * and range operations only do a TLB lookup on the start address.
 */
static void aurora_pa_range(unsigned long start, unsigned long end,
                        unsigned long offset)
{
        unsigned long flags;

        raw_spin_lock_irqsave(&l2x0_lock, flags);
        writel_relaxed(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
        writel_relaxed(end, l2x0_base + offset);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);

        cache_sync();
}

static void aurora_inv_range(unsigned long start, unsigned long end)
{
        /*
         * round start and end adresses up to cache line size
         */
        start &= ~(CACHE_LINE_SIZE - 1);
        end = ALIGN(end, CACHE_LINE_SIZE);

        /*
         * Invalidate all full cache lines between 'start' and 'end'.
         */
        while (start < end) {
                unsigned long range_end = calc_range_end(start, end);
                aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
                                AURORA_INVAL_RANGE_REG);
                start = range_end;
        }
}

static void aurora_clean_range(unsigned long start, unsigned long end)
{
        /*
         * If L2 is forced to WT, the L2 will always be clean and we
         * don't need to do anything here.
         */
        if (!l2_wt_override) {
                start &= ~(CACHE_LINE_SIZE - 1);
                end = ALIGN(end, CACHE_LINE_SIZE);
                while (start != end) {
                        unsigned long range_end = calc_range_end(start, end);
                        aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
                                        AURORA_CLEAN_RANGE_REG);
                        start = range_end;
                }
        }
}

static void aurora_flush_range(unsigned long start, unsigned long end)
{
        start &= ~(CACHE_LINE_SIZE - 1);
        end = ALIGN(end, CACHE_LINE_SIZE);
        while (start != end) {
                unsigned long range_end = calc_range_end(start, end);
                /*
                 * If L2 is forced to WT, the L2 will always be clean and we
                 * just need to invalidate.
                 */
                if (l2_wt_override)
                        aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
                                                        AURORA_INVAL_RANGE_REG);
                else
                        aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
                                                        AURORA_FLUSH_RANGE_REG);
                start = range_end;
        }
}

static void aurora_save(void __iomem *base)
{
        l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL);
        l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL);
}

static void aurora_resume(void)
{
        void __iomem *base = l2x0_base;

        if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
                writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL);
                writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL);
        }
}

/*
 * For Aurora cache in no outer mode, enable via the CP15 coprocessor
 * broadcasting of cache commands to L2.
 */
static void __init aurora_enable_no_outer(void __iomem *base, u32 aux,
        unsigned num_lock)
{
        u32 u;

        asm volatile("mrc p15, 1, %0, c15, c2, 0" : "=r" (u));
        u |= AURORA_CTRL_FW;            /* Set the FW bit */
        asm volatile("mcr p15, 1, %0, c15, c2, 0" : : "r" (u));

        isb();

        l2c_enable(base, aux, num_lock);
}

static void __init aurora_fixup(void __iomem *base, u32 cache_id,
        struct outer_cache_fns *fns)
{
        sync_reg_offset = AURORA_SYNC_REG;
}

static void __init aurora_of_parse(const struct device_node *np,
                                u32 *aux_val, u32 *aux_mask)
{
        u32 val = AURORA_ACR_REPLACEMENT_TYPE_SEMIPLRU;
        u32 mask =  AURORA_ACR_REPLACEMENT_MASK;

        of_property_read_u32(np, "cache-id-part",
                        &cache_id_part_number_from_dt);

        /* Determine and save the write policy */
        l2_wt_override = of_property_read_bool(np, "wt-override");

        if (l2_wt_override) {
                val |= AURORA_ACR_FORCE_WRITE_THRO_POLICY;
                mask |= AURORA_ACR_FORCE_WRITE_POLICY_MASK;
        }

        *aux_val &= ~mask;
        *aux_val |= val;
        *aux_mask &= ~mask;
}

static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
        .type = "Aurora",
        .way_size_0 = SZ_4K,
        .num_lock = 4,
        .of_parse = aurora_of_parse,
        .enable = l2c_enable,
        .fixup = aurora_fixup,
        .save  = aurora_save,
        .outer_cache = {
                .inv_range   = aurora_inv_range,
                .clean_range = aurora_clean_range,
                .flush_range = aurora_flush_range,
                .flush_all   = l2x0_flush_all,
                .disable     = l2x0_disable,
                .sync        = l2x0_cache_sync,
                .resume      = aurora_resume,
        },
};

static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
        .type = "Aurora",
        .way_size_0 = SZ_4K,
        .num_lock = 4,
        .of_parse = aurora_of_parse,
        .enable = aurora_enable_no_outer,
        .fixup = aurora_fixup,
        .save  = aurora_save,
        .outer_cache = {
                .resume      = aurora_resume,
        },
};

/*
 * For certain Broadcom SoCs, depending on the address range, different offsets
 * need to be added to the address before passing it to L2 for
 * invalidation/clean/flush
 *
 * Section Address Range              Offset        EMI
 *   1     0x00000000 - 0x3FFFFFFF    0x80000000    VC
 *   2     0x40000000 - 0xBFFFFFFF    0x40000000    SYS
 *   3     0xC0000000 - 0xFFFFFFFF    0x80000000    VC
 *
 * When the start and end addresses have crossed two different sections, we
 * need to break the L2 operation into two, each within its own section.
 * For example, if we need to invalidate addresses starts at 0xBFFF0000 and
 * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
 * 0xC0000000 - 0xC0001000
 *
 * Note 1:
 * By breaking a single L2 operation into two, we may potentially suffer some
 * performance hit, but keep in mind the cross section case is very rare
 *
 * Note 2:
 * We do not need to handle the case when the start address is in
 * Section 1 and the end address is in Section 3, since it is not a valid use
 * case
 *
 * Note 3:
 * Section 1 in practical terms can no longer be used on rev A2. Because of
 * that the code does not need to handle section 1 at all.
 *
 */
#define BCM_SYS_EMI_START_ADDR        0x40000000UL
#define BCM_VC_EMI_SEC3_START_ADDR    0xC0000000UL

#define BCM_SYS_EMI_OFFSET            0x40000000UL
#define BCM_VC_EMI_OFFSET             0x80000000UL

static inline int bcm_addr_is_sys_emi(unsigned long addr)
{
        return (addr >= BCM_SYS_EMI_START_ADDR) &&
                (addr < BCM_VC_EMI_SEC3_START_ADDR);
}

static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
{
        if (bcm_addr_is_sys_emi(addr))
                return addr + BCM_SYS_EMI_OFFSET;
        else
                return addr + BCM_VC_EMI_OFFSET;
}

static void bcm_inv_range(unsigned long start, unsigned long end)
{
        unsigned long new_start, new_end;

        BUG_ON(start < BCM_SYS_EMI_START_ADDR);

        if (unlikely(end <= start))
                return;

        new_start = bcm_l2_phys_addr(start);
        new_end = bcm_l2_phys_addr(end);

        /* normal case, no cross section between start and end */
        if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
                l2c210_inv_range(new_start, new_end);
                return;
        }

        /* They cross sections, so it can only be a cross from section
         * 2 to section 3
         */
        l2c210_inv_range(new_start,
                bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
        l2c210_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
                new_end);
}

static void bcm_clean_range(unsigned long start, unsigned long end)
{
        unsigned long new_start, new_end;

        BUG_ON(start < BCM_SYS_EMI_START_ADDR);

        if (unlikely(end <= start))
                return;

        new_start = bcm_l2_phys_addr(start);
        new_end = bcm_l2_phys_addr(end);

        /* normal case, no cross section between start and end */
        if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
                l2c210_clean_range(new_start, new_end);
                return;
        }

        /* They cross sections, so it can only be a cross from section
         * 2 to section 3
         */
        l2c210_clean_range(new_start,
                bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
        l2c210_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
                new_end);
}

static void bcm_flush_range(unsigned long start, unsigned long end)
{
        unsigned long new_start, new_end;

        BUG_ON(start < BCM_SYS_EMI_START_ADDR);

        if (unlikely(end <= start))
                return;

        if ((end - start) >= l2x0_size) {
                outer_cache.flush_all();
                return;
        }

        new_start = bcm_l2_phys_addr(start);
        new_end = bcm_l2_phys_addr(end);

        /* normal case, no cross section between start and end */
        if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
                l2c210_flush_range(new_start, new_end);
                return;
        }

        /* They cross sections, so it can only be a cross from section
         * 2 to section 3
         */
        l2c210_flush_range(new_start,
                bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
        l2c210_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
                new_end);
}

/* Broadcom L2C-310 start from ARMs R3P2 or later, and require no fixups */
static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
        .type = "BCM-L2C-310",
        .way_size_0 = SZ_8K,
        .num_lock = 8,
        .of_parse = l2c310_of_parse,
        .enable = l2c310_enable,
        .save  = l2c310_save,
        .outer_cache = {
                .inv_range   = bcm_inv_range,
                .clean_range = bcm_clean_range,
                .flush_range = bcm_flush_range,
                .flush_all   = l2c210_flush_all,
                .disable     = l2c310_disable,
                .sync        = l2c210_sync,
                .resume      = l2c310_resume,
        },
};

static void __init tauros3_save(void __iomem *base)
{
        l2c_save(base);

        l2x0_saved_regs.aux2_ctrl =
                readl_relaxed(base + TAUROS3_AUX2_CTRL);
        l2x0_saved_regs.prefetch_ctrl =
                readl_relaxed(base + L310_PREFETCH_CTRL);
}

static void tauros3_resume(void)
{
        void __iomem *base = l2x0_base;

        if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) {
                writel_relaxed(l2x0_saved_regs.aux2_ctrl,
                               base + TAUROS3_AUX2_CTRL);
                writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
                               base + L310_PREFETCH_CTRL);

                l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8);
        }
}

static const struct l2c_init_data of_tauros3_data __initconst = {
        .type = "Tauros3",
        .way_size_0 = SZ_8K,
        .num_lock = 8,
        .enable = l2c_enable,
        .save  = tauros3_save,
        /* Tauros3 broadcasts L1 cache operations to L2 */
        .outer_cache = {
                .resume      = tauros3_resume,
        },
};

#define L2C_ID(name, fns) { .compatible = name, .data = (void *)&fns }
static const struct of_device_id l2x0_ids[] __initconst = {
        L2C_ID("arm,l210-cache", of_l2c210_data),
        L2C_ID("arm,l220-cache", of_l2c220_data),
        L2C_ID("arm,pl310-cache", of_l2c310_data),
        L2C_ID("brcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
        L2C_ID("marvell,aurora-outer-cache", of_aurora_with_outer_data),
        L2C_ID("marvell,aurora-system-cache", of_aurora_no_outer_data),
        L2C_ID("marvell,tauros3-cache", of_tauros3_data),
        /* Deprecated IDs */
        L2C_ID("bcm,bcm11351-a2-pl310-cache", of_bcm_l2x0_data),
        {}
};

int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
{
        const struct l2c_init_data *data;
        struct device_node *np;
        struct resource res;
        u32 cache_id, old_aux;

        np = of_find_matching_node(NULL, l2x0_ids);
        if (!np)
                return -ENODEV;

        if (of_address_to_resource(np, 0, &res))
                return -ENODEV;

        l2x0_base = ioremap(res.start, resource_size(&res));
        if (!l2x0_base)
                return -ENOMEM;

        l2x0_saved_regs.phy_base = res.start;

        data = of_match_node(l2x0_ids, np)->data;

        if (of_device_is_compatible(np, "arm,pl310-cache") &&
            of_property_read_bool(np, "arm,io-coherent"))
                data = &of_l2c310_coherent_data;

        old_aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
        if (old_aux != ((old_aux & aux_mask) | aux_val)) {
                pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",
                        old_aux, (old_aux & aux_mask) | aux_val);
        } else if (aux_mask != ~0U && aux_val != 0) {
                pr_alert("L2C: platform provided aux values match the hardware, so have no effect.  Please remove them.\n");
        }

        /* All L2 caches are unified, so this property should be specified */
        if (!of_property_read_bool(np, "cache-unified"))
                pr_err("L2C: device tree omits to specify unified cache\n");

        /* L2 configuration can only be changed if the cache is disabled */
        if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN))
                if (data->of_parse)
                        data->of_parse(np, &aux_val, &aux_mask);

        if (cache_id_part_number_from_dt)
                cache_id = cache_id_part_number_from_dt;
        else
                cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);

        __l2c_init(data, aux_val, aux_mask, cache_id);

        return 0;
}
#endif