arch/arm/plat-omap/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 config ARCH_OMAP
   3         bool
   4
   5 if ARCH_OMAP
   6
   7 menu "TI OMAP Common Features"
   8
   9 config ARCH_OMAP_OTG
  10         bool
  11
  12 comment "OMAP Feature Selections"
  13
  14 config OMAP_DEBUG_DEVICES
  15         bool
  16         help
  17           For debug cards on TI reference boards.
  18
  19 config OMAP_DEBUG_LEDS
  20         def_bool y if NEW_LEDS
  21         depends on OMAP_DEBUG_DEVICES
  22         select LEDS_CLASS
  23
  24 config POWER_AVS_OMAP
  25         bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
  26         depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
  27         select POWER_SUPPLY
  28         help
  29           Say Y to enable AVS(Adaptive Voltage Scaling)
  30           support on OMAP containing the version 1 or
  31           version 2 of the SmartReflex IP.
  32           V1 is the 65nm version used in OMAP3430.
  33           V2 is the update for the 45nm version of the IP used in OMAP3630
  34           and OMAP4430
  35
  36           Please note, that by default SmartReflex is only
  37           initialized and not enabled. To enable the automatic voltage
  38           compensation for vdd mpu and vdd core from user space,
  39           user must write 1 to
  40                 /debug/smartreflex/sr_<X>/autocomp,
  41           where X is mpu_iva or core for OMAP3.
  42           Optionally autocompensation can be enabled in the kernel
  43           by default during system init via the enable_on_init flag
  44           which an be passed as platform data to the smartreflex driver.
  45
  46 config POWER_AVS_OMAP_CLASS3
  47         bool "Class 3 mode of Smartreflex Implementation"
  48         depends on POWER_AVS_OMAP && TWL4030_CORE
  49         help
  50           Say Y to enable Class 3 implementation of Smartreflex
  51
  52           Class 3 implementation of Smartreflex employs continuous hardware
  53           voltage calibration.
  54
  55 config OMAP_RESET_CLOCKS
  56         bool "Reset unused clocks during boot"
  57         depends on ARCH_OMAP
  58         help
  59           Say Y if you want to reset unused clocks during boot.
  60           This option saves power, but assumes all drivers are
  61           using the clock framework. Broken drivers that do not
  62           yet use clock framework may not work with this option.
  63           If you are booting from another operating system, you
  64           probably do not want this option enabled until your
  65           device drivers work properly.
  66
  67 config OMAP_MPU_TIMER
  68         bool "Use mpu timer"
  69         depends on ARCH_OMAP1
  70         help
  71           Select this option if you want to use the OMAP mpu timer. This
  72           timer provides more intra-tick resolution than the 32KHz timer,
  73           but consumes more power.
  74
  75 config OMAP_32K_TIMER
  76         bool "Use 32KHz timer"
  77         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
  78         default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
  79         help
  80           Select this option if you want to enable the OMAP 32KHz timer.
  81           This timer saves power compared to the OMAP_MPU_TIMER, and has
  82           support for no tick during idle. The 32KHz timer provides less
  83           intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
  84           currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
  85
  86           On OMAP2PLUS this value is only used for CONFIG_HZ and
  87           CLOCK_TICK_RATE compile time calculation.
  88           The actual timer selection is done in the board file
  89           through the (DT_)MACHINE_START structure.
  90
  91
  92 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
  93         bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
  94         depends on ARCH_OMAP3 && PM
  95         default n
  96         help
  97           Without this option, L2 Auxiliary control register contents are
  98           lost during off-mode entry on HS/EMU devices. This feature
  99           requires support from PPA / boot-loader in HS/EMU devices, which
 100           currently does not exist by default.
 101
 102 config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 103         int "Service ID for the support routine to set L2 AUX control"
 104         depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 105         default 43
 106         help
 107           PPA routine service ID for setting L2 auxiliary control register.
 108
 109 config OMAP_DM_TIMER
 110         bool "Use dual-mode timer"
 111         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 112         help
 113          Select this option if you want to use OMAP Dual-Mode timers.
 114
 115 config OMAP_SERIAL_WAKE
 116         bool "Enable wake-up events for serial ports"
 117         depends on ARCH_OMAP1 && OMAP_MUX
 118         default y
 119         help
 120           Select this option if you want to have your system wake up
 121           to data on the serial RX line. This allows you to wake the
 122           system from serial console.
 123
 124 choice
 125         prompt "OMAP PM layer selection"
 126         depends on ARCH_OMAP
 127         default OMAP_PM_NOOP
 128
 129 config OMAP_PM_NOOP
 130         bool "No-op/debug PM layer"
 131
 132 endchoice
 133
 134 endmenu
 135
 136 endif