arch/arm/plat-omap/include/mach/mux.h

   1 /*
   2  * arch/arm/plat-omap/include/mach/mux.h
   3  *
   4  * Table of the Omap register configurations for the FUNC_MUX and
   5  * PULL_DWN combinations.
   6  *
   7  * Copyright (C) 2004 - 2008 Texas Instruments Inc.
   8  * Copyright (C) 2003 - 2008 Nokia Corporation
   9  *
  10  * Written by Tony Lindgren
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  25  *
  26  * NOTE: Please use the following naming style for new pin entries.
  27  *       For example, W8_1610_MMC2_DAT0, where:
  28  *       - W8        = ball
  29  *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
  30  *       - MMC2_DAT0 = function
  31  */
  32
  33 #ifndef __ASM_ARCH_MUX_H
  34 #define __ASM_ARCH_MUX_H
  35
  36 #define PU_PD_SEL_NA            0       /* No pu_pd reg available */
  37 #define PULL_DWN_CTRL_NA        0       /* No pull-down control needed */
  38
  39 #ifdef  CONFIG_OMAP_MUX_DEBUG
  40 #define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
  41                                         .mux_reg = FUNC_MUX_CTRL_##reg, \
  42                                         .mask_offset = mode_offset, \
  43                                         .mask = mode,
  44
  45 #define PULL_REG(reg, bit, status)      .pull_name = "PULL_DWN_CTRL_"#reg, \
  46                                         .pull_reg = PULL_DWN_CTRL_##reg, \
  47                                         .pull_bit = bit, \
  48                                         .pull_val = status,
  49
  50 #define PU_PD_REG(reg, status)          .pu_pd_name = "PU_PD_SEL_"#reg, \
  51                                         .pu_pd_reg = PU_PD_SEL_##reg, \
  52                                         .pu_pd_val = status,
  53
  54 #define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
  55                                         .mux_reg = OMAP730_IO_CONF_##reg, \
  56                                         .mask_offset = mode_offset, \
  57                                         .mask = mode,
  58
  59 #define PULL_REG_730(reg, bit, status)  .pull_name = "OMAP730_IO_CONF_"#reg, \
  60                                         .pull_reg = OMAP730_IO_CONF_##reg, \
  61                                         .pull_bit = bit, \
  62                                         .pull_val = status,
  63
  64 #define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
  65                                         .mux_reg = OMAP850_IO_CONF_##reg, \
  66                                         .mask_offset = mode_offset, \
  67                                         .mask = mode,
  68
  69 #define PULL_REG_850(reg, bit, status)  .pull_name = "OMAP850_IO_CONF_"#reg, \
  70                                         .pull_reg = OMAP850_IO_CONF_##reg, \
  71                                         .pull_bit = bit, \
  72                                         .pull_val = status,
  73
  74 #else
  75
  76 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
  77                                         .mask_offset = mode_offset, \
  78                                         .mask = mode,
  79
  80 #define PULL_REG(reg, bit, status)      .pull_reg = PULL_DWN_CTRL_##reg, \
  81                                         .pull_bit = bit, \
  82                                         .pull_val = status,
  83
  84 #define PU_PD_REG(reg, status)          .pu_pd_reg = PU_PD_SEL_##reg, \
  85                                         .pu_pd_val = status,
  86
  87 #define MUX_REG_730(reg, mode_offset, mode) \
  88                                         .mux_reg = OMAP730_IO_CONF_##reg, \
  89                                         .mask_offset = mode_offset, \
  90                                         .mask = mode,
  91
  92 #define PULL_REG_730(reg, bit, status)  .pull_reg = OMAP730_IO_CONF_##reg, \
  93                                         .pull_bit = bit, \
  94                                         .pull_val = status,
  95
  96 #define MUX_REG_850(reg, mode_offset, mode) \
  97                                         .mux_reg = OMAP850_IO_CONF_##reg, \
  98                                         .mask_offset = mode_offset, \
  99                                         .mask = mode,
 100
 101 #define PULL_REG_850(reg, bit, status)  .pull_reg = OMAP850_IO_CONF_##reg, \
 102                                         .pull_bit = bit, \
 103                                         .pull_val = status,
 104
 105 #endif /* CONFIG_OMAP_MUX_DEBUG */
 106
 107 #define MUX_CFG(desc, mux_reg, mode_offset, mode,       \
 108                 pull_reg, pull_bit, pull_status,        \
 109                 pu_pd_reg, pu_pd_status, debug_status)  \
 110 {                                                       \
 111         .name =  desc,                                  \
 112         .debug = debug_status,                          \
 113         MUX_REG(mux_reg, mode_offset, mode)             \
 114         PULL_REG(pull_reg, pull_bit, pull_status)       \
 115         PU_PD_REG(pu_pd_reg, pu_pd_status)              \
 116 },
 117
 118
 119 /*
 120  * OMAP730/850 has a slightly different config for the pin mux.
 121  * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
 122  *   not the FUNC_MUX_CTRL_x regs from hardware.h
 123  * - for pull-up/down, only has one enable bit which is is in the same register
 124  *   as mux config
 125  */
 126 #define MUX_CFG_730(desc, mux_reg, mode_offset, mode,   \
 127                    pull_bit, pull_status, debug_status)\
 128 {                                                       \
 129         .name =  desc,                                  \
 130         .debug = debug_status,                          \
 131         MUX_REG_730(mux_reg, mode_offset, mode)         \
 132         PULL_REG_730(mux_reg, pull_bit, pull_status)    \
 133         PU_PD_REG(NA, 0)                \
 134 },
 135
 136 #define MUX_CFG_850(desc, mux_reg, mode_offset, mode,   \
 137                    pull_bit, pull_status, debug_status)\
 138 {                                                       \
 139         .name =  desc,                                  \
 140         .debug = debug_status,                          \
 141         MUX_REG_850(mux_reg, mode_offset, mode)         \
 142         PULL_REG_850(mux_reg, pull_bit, pull_status)    \
 143         PU_PD_REG(NA, 0)                \
 144 },
 145
 146
 147 #define MUX_CFG_24XX(desc, reg_offset, mode,                    \
 148                                 pull_en, pull_mode, dbg)        \
 149 {                                                               \
 150         .name           = desc,                                 \
 151         .debug          = dbg,                                  \
 152         .mux_reg        = reg_offset,                           \
 153         .mask           = mode,                                 \
 154         .pull_val       = pull_en,                              \
 155         .pu_pd_val      = pull_mode,                            \
 156 },
 157
 158 /* 24xx/34xx mux bit defines */
 159 #define OMAP2_PULL_ENA          (1 << 3)
 160 #define OMAP2_PULL_UP           (1 << 4)
 161 #define OMAP2_ALTELECTRICALSEL  (1 << 5)
 162
 163 /* 34xx specific mux bit defines */
 164 #define OMAP3_INPUT_EN          (1 << 8)
 165 #define OMAP3_OFF_EN            (1 << 9)
 166 #define OMAP3_OFFOUT_EN         (1 << 10)
 167 #define OMAP3_OFFOUT_VAL        (1 << 11)
 168 #define OMAP3_OFF_PULL_EN       (1 << 12)
 169 #define OMAP3_OFF_PULL_UP       (1 << 13)
 170 #define OMAP3_WAKEUP_EN         (1 << 14)
 171
 172 /* 34xx mux mode options for each pin. See TRM for options */
 173 #define OMAP34XX_MUX_MODE0      0
 174 #define OMAP34XX_MUX_MODE1      1
 175 #define OMAP34XX_MUX_MODE2      2
 176 #define OMAP34XX_MUX_MODE3      3
 177 #define OMAP34XX_MUX_MODE4      4
 178 #define OMAP34XX_MUX_MODE5      5
 179 #define OMAP34XX_MUX_MODE6      6
 180 #define OMAP34XX_MUX_MODE7      7
 181
 182 /* 34xx active pin states */
 183 #define OMAP34XX_PIN_OUTPUT             0
 184 #define OMAP34XX_PIN_INPUT              OMAP3_INPUT_EN
 185 #define OMAP34XX_PIN_INPUT_PULLUP       (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
 186                                                 | OMAP2_PULL_UP)
 187 #define OMAP34XX_PIN_INPUT_PULLDOWN     (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
 188
 189 /* 34xx off mode states */
 190 #define OMAP34XX_PIN_OFF_NONE           0
 191 #define OMAP34XX_PIN_OFF_OUTPUT_HIGH    (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
 192                                                 | OMAP3_OFFOUT_VAL)
 193 #define OMAP34XX_PIN_OFF_OUTPUT_LOW     (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
 194 #define OMAP34XX_PIN_OFF_INPUT_PULLUP   (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
 195                                                 | OMAP3_OFF_PULL_UP)
 196 #define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
 197 #define OMAP34XX_PIN_OFF_WAKEUPENABLE   OMAP3_WAKEUP_EN
 198
 199 #define MUX_CFG_34XX(desc, reg_offset, mux_value) {             \
 200         .name           = desc,                                 \
 201         .debug          = 0,                                    \
 202         .mux_reg        = reg_offset,                           \
 203         .mux_val        = mux_value                             \
 204 },
 205
 206 struct pin_config {
 207         char                    *name;
 208         const unsigned int      mux_reg;
 209         unsigned char           debug;
 210
 211 #if     defined(CONFIG_ARCH_OMAP34XX)
 212         u16                     mux_val; /* Wake-up, off mode, pull, mux mode */
 213 #endif
 214
 215 #if     defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 216         const unsigned char mask_offset;
 217         const unsigned char mask;
 218
 219         const char *pull_name;
 220         const unsigned int pull_reg;
 221         const unsigned char pull_val;
 222         const unsigned char pull_bit;
 223
 224         const char *pu_pd_name;
 225         const unsigned int pu_pd_reg;
 226         const unsigned char pu_pd_val;
 227 #endif
 228
 229 #if     defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
 230         const char *mux_reg_name;
 231 #endif
 232
 233 };
 234
 235 enum omap730_index {
 236         /* OMAP 730 keyboard */
 237         E2_730_KBR0,
 238         J7_730_KBR1,
 239         E1_730_KBR2,
 240         F3_730_KBR3,
 241         D2_730_KBR4,
 242         C2_730_KBC0,
 243         D3_730_KBC1,
 244         E4_730_KBC2,
 245         F4_730_KBC3,
 246         E3_730_KBC4,
 247
 248         /* USB */
 249         AA17_730_USB_DM,
 250         W16_730_USB_PU_EN,
 251         W17_730_USB_VBUSI,
 252 };
 253
 254 enum omap850_index {
 255         /* OMAP 850 keyboard */
 256         E2_850_KBR0,
 257         J7_850_KBR1,
 258         E1_850_KBR2,
 259         F3_850_KBR3,
 260         D2_850_KBR4,
 261         C2_850_KBC0,
 262         D3_850_KBC1,
 263         E4_850_KBC2,
 264         F4_850_KBC3,
 265         E3_850_KBC4,
 266
 267         /* USB */
 268         AA17_850_USB_DM,
 269         W16_850_USB_PU_EN,
 270         W17_850_USB_VBUSI,
 271 };
 272
 273
 274 enum omap1xxx_index {
 275         /* UART1 (BT_UART_GATING)*/
 276         UART1_TX = 0,
 277         UART1_RTS,
 278
 279         /* UART2 (COM_UART_GATING)*/
 280         UART2_TX,
 281         UART2_RX,
 282         UART2_CTS,
 283         UART2_RTS,
 284
 285         /* UART3 (GIGA_UART_GATING) */
 286         UART3_TX,
 287         UART3_RX,
 288         UART3_CTS,
 289         UART3_RTS,
 290         UART3_CLKREQ,
 291         UART3_BCLK,     /* 12MHz clock out */
 292         Y15_1610_UART3_RTS,
 293
 294         /* PWT & PWL */
 295         PWT,
 296         PWL,
 297
 298         /* USB master generic */
 299         R18_USB_VBUS,
 300         R18_1510_USB_GPIO0,
 301         W4_USB_PUEN,
 302         W4_USB_CLKO,
 303         W4_USB_HIGHZ,
 304         W4_GPIO58,
 305
 306         /* USB1 master */
 307         USB1_SUSP,
 308         USB1_SEO,
 309         W13_1610_USB1_SE0,
 310         USB1_TXEN,
 311         USB1_TXD,
 312         USB1_VP,
 313         USB1_VM,
 314         USB1_RCV,
 315         USB1_SPEED,
 316         R13_1610_USB1_SPEED,
 317         R13_1710_USB1_SE0,
 318
 319         /* USB2 master */
 320         USB2_SUSP,
 321         USB2_VP,
 322         USB2_TXEN,
 323         USB2_VM,
 324         USB2_RCV,
 325         USB2_SEO,
 326         USB2_TXD,
 327
 328         /* OMAP-1510 GPIO */
 329         R18_1510_GPIO0,
 330         R19_1510_GPIO1,
 331         M14_1510_GPIO2,
 332
 333         /* OMAP1610 GPIO */
 334         P18_1610_GPIO3,
 335         Y15_1610_GPIO17,
 336
 337         /* OMAP-1710 GPIO */
 338         R18_1710_GPIO0,
 339         V2_1710_GPIO10,
 340         N21_1710_GPIO14,
 341         W15_1710_GPIO40,
 342
 343         /* MPUIO */
 344         MPUIO2,
 345         N15_1610_MPUIO2,
 346         MPUIO4,
 347         MPUIO5,
 348         T20_1610_MPUIO5,
 349         W11_1610_MPUIO6,
 350         V10_1610_MPUIO7,
 351         W11_1610_MPUIO9,
 352         V10_1610_MPUIO10,
 353         W10_1610_MPUIO11,
 354         E20_1610_MPUIO13,
 355         U20_1610_MPUIO14,
 356         E19_1610_MPUIO15,
 357
 358         /* MCBSP2 */
 359         MCBSP2_CLKR,
 360         MCBSP2_CLKX,
 361         MCBSP2_DR,
 362         MCBSP2_DX,
 363         MCBSP2_FSR,
 364         MCBSP2_FSX,
 365
 366         /* MCBSP3 */
 367         MCBSP3_CLKX,
 368
 369         /* Misc ballouts */
 370         BALLOUT_V8_ARMIO3,
 371         N20_HDQ,
 372
 373         /* OMAP-1610 MMC2 */
 374         W8_1610_MMC2_DAT0,
 375         V8_1610_MMC2_DAT1,
 376         W15_1610_MMC2_DAT2,
 377         R10_1610_MMC2_DAT3,
 378         Y10_1610_MMC2_CLK,
 379         Y8_1610_MMC2_CMD,
 380         V9_1610_MMC2_CMDDIR,
 381         V5_1610_MMC2_DATDIR0,
 382         W19_1610_MMC2_DATDIR1,
 383         R18_1610_MMC2_CLKIN,
 384
 385         /* OMAP-1610 External Trace Interface */
 386         M19_1610_ETM_PSTAT0,
 387         L15_1610_ETM_PSTAT1,
 388         L18_1610_ETM_PSTAT2,
 389         L19_1610_ETM_D0,
 390         J19_1610_ETM_D6,
 391         J18_1610_ETM_D7,
 392
 393         /* OMAP16XX GPIO */
 394         P20_1610_GPIO4,
 395         V9_1610_GPIO7,
 396         W8_1610_GPIO9,
 397         N20_1610_GPIO11,
 398         N19_1610_GPIO13,
 399         P10_1610_GPIO22,
 400         V5_1610_GPIO24,
 401         AA20_1610_GPIO_41,
 402         W19_1610_GPIO48,
 403         M7_1610_GPIO62,
 404         V14_16XX_GPIO37,
 405         R9_16XX_GPIO18,
 406         L14_16XX_GPIO49,
 407
 408         /* OMAP-1610 uWire */
 409         V19_1610_UWIRE_SCLK,
 410         U18_1610_UWIRE_SDI,
 411         W21_1610_UWIRE_SDO,
 412         N14_1610_UWIRE_CS0,
 413         P15_1610_UWIRE_CS3,
 414         N15_1610_UWIRE_CS1,
 415
 416         /* OMAP-1610 SPI */
 417         U19_1610_SPIF_SCK,
 418         U18_1610_SPIF_DIN,
 419         P20_1610_SPIF_DIN,
 420         W21_1610_SPIF_DOUT,
 421         R18_1610_SPIF_DOUT,
 422         N14_1610_SPIF_CS0,
 423         N15_1610_SPIF_CS1,
 424         T19_1610_SPIF_CS2,
 425         P15_1610_SPIF_CS3,
 426
 427         /* OMAP-1610 Flash */
 428         L3_1610_FLASH_CS2B_OE,
 429         M8_1610_FLASH_CS2B_WE,
 430
 431         /* First MMC */
 432         MMC_CMD,
 433         MMC_DAT1,
 434         MMC_DAT2,
 435         MMC_DAT0,
 436         MMC_CLK,
 437         MMC_DAT3,
 438
 439         /* OMAP-1710 MMC CMDDIR and DATDIR0 */
 440         M15_1710_MMC_CLKI,
 441         P19_1710_MMC_CMDDIR,
 442         P20_1710_MMC_DATDIR0,
 443
 444         /* OMAP-1610 USB0 alternate pin configuration */
 445         W9_USB0_TXEN,
 446         AA9_USB0_VP,
 447         Y5_USB0_RCV,
 448         R9_USB0_VM,
 449         V6_USB0_TXD,
 450         W5_USB0_SE0,
 451         V9_USB0_SPEED,
 452         V9_USB0_SUSP,
 453
 454         /* USB2 */
 455         W9_USB2_TXEN,
 456         AA9_USB2_VP,
 457         Y5_USB2_RCV,
 458         R9_USB2_VM,
 459         V6_USB2_TXD,
 460         W5_USB2_SE0,
 461
 462         /* 16XX UART */
 463         R13_1610_UART1_TX,
 464         V14_16XX_UART1_RX,
 465         R14_1610_UART1_CTS,
 466         AA15_1610_UART1_RTS,
 467         R9_16XX_UART2_RX,
 468         L14_16XX_UART3_RX,
 469
 470         /* I2C OMAP-1610 */
 471         I2C_SCL,
 472         I2C_SDA,
 473
 474         /* Keypad */
 475         F18_1610_KBC0,
 476         D20_1610_KBC1,
 477         D19_1610_KBC2,
 478         E18_1610_KBC3,
 479         C21_1610_KBC4,
 480         G18_1610_KBR0,
 481         F19_1610_KBR1,
 482         H14_1610_KBR2,
 483         E20_1610_KBR3,
 484         E19_1610_KBR4,
 485         N19_1610_KBR5,
 486
 487         /* Power management */
 488         T20_1610_LOW_PWR,
 489
 490         /* MCLK Settings */
 491         V5_1710_MCLK_ON,
 492         V5_1710_MCLK_OFF,
 493         R10_1610_MCLK_ON,
 494         R10_1610_MCLK_OFF,
 495
 496         /* CompactFlash controller */
 497         P11_1610_CF_CD2,
 498         R11_1610_CF_IOIS16,
 499         V10_1610_CF_IREQ,
 500         W10_1610_CF_RESET,
 501         W11_1610_CF_CD1,
 502
 503         /* parallel camera */
 504         J15_1610_CAM_LCLK,
 505         J18_1610_CAM_D7,
 506         J19_1610_CAM_D6,
 507         J14_1610_CAM_D5,
 508         K18_1610_CAM_D4,
 509         K19_1610_CAM_D3,
 510         K15_1610_CAM_D2,
 511         K14_1610_CAM_D1,
 512         L19_1610_CAM_D0,
 513         L18_1610_CAM_VS,
 514         L15_1610_CAM_HS,
 515         M19_1610_CAM_RSTZ,
 516         Y15_1610_CAM_OUTCLK,
 517
 518         /* serial camera */
 519         H19_1610_CAM_EXCLK,
 520         Y12_1610_CCP_CLKP,
 521         W13_1610_CCP_CLKM,
 522         W14_1610_CCP_DATAP,
 523         Y14_1610_CCP_DATAM,
 524
 525 };
 526
 527 enum omap24xx_index {
 528         /* 24xx I2C */
 529         M19_24XX_I2C1_SCL,
 530         L15_24XX_I2C1_SDA,
 531         J15_24XX_I2C2_SCL,
 532         H19_24XX_I2C2_SDA,
 533
 534         /* 24xx Menelaus interrupt */
 535         W19_24XX_SYS_NIRQ,
 536
 537         /* 24xx clock */
 538         W14_24XX_SYS_CLKOUT,
 539
 540         /* 24xx GPMC chipselects, wait pin monitoring */
 541         E2_GPMC_NCS2,
 542         L2_GPMC_NCS7,
 543         L3_GPMC_WAIT0,
 544         N7_GPMC_WAIT1,
 545         M1_GPMC_WAIT2,
 546         P1_GPMC_WAIT3,
 547
 548         /* 242X McBSP */
 549         Y15_24XX_MCBSP2_CLKX,
 550         R14_24XX_MCBSP2_FSX,
 551         W15_24XX_MCBSP2_DR,
 552         V15_24XX_MCBSP2_DX,
 553
 554         /* 24xx GPIO */
 555         M21_242X_GPIO11,
 556         P21_242X_GPIO12,
 557         AA10_242X_GPIO13,
 558         AA6_242X_GPIO14,
 559         AA4_242X_GPIO15,
 560         Y11_242X_GPIO16,
 561         AA12_242X_GPIO17,
 562         AA8_242X_GPIO58,
 563         Y20_24XX_GPIO60,
 564         W4__24XX_GPIO74,
 565         N15_24XX_GPIO85,
 566         M15_24XX_GPIO92,
 567         P20_24XX_GPIO93,
 568         P18_24XX_GPIO95,
 569         M18_24XX_GPIO96,
 570         L14_24XX_GPIO97,
 571         J15_24XX_GPIO99,
 572         V14_24XX_GPIO117,
 573         P14_24XX_GPIO125,
 574
 575         /* 242x DBG GPIO */
 576         V4_242X_GPIO49,
 577         W2_242X_GPIO50,
 578         U4_242X_GPIO51,
 579         V3_242X_GPIO52,
 580         V2_242X_GPIO53,
 581         V6_242X_GPIO53,
 582         T4_242X_GPIO54,
 583         Y4_242X_GPIO54,
 584         T3_242X_GPIO55,
 585         U2_242X_GPIO56,
 586
 587         /* 24xx external DMA requests */
 588         AA10_242X_DMAREQ0,
 589         AA6_242X_DMAREQ1,
 590         E4_242X_DMAREQ2,
 591         G4_242X_DMAREQ3,
 592         D3_242X_DMAREQ4,
 593         E3_242X_DMAREQ5,
 594
 595         /* UART3 */
 596         K15_24XX_UART3_TX,
 597         K14_24XX_UART3_RX,
 598
 599         /* MMC/SDIO */
 600         G19_24XX_MMC_CLKO,
 601         H18_24XX_MMC_CMD,
 602         F20_24XX_MMC_DAT0,
 603         H14_24XX_MMC_DAT1,
 604         E19_24XX_MMC_DAT2,
 605         D19_24XX_MMC_DAT3,
 606         F19_24XX_MMC_DAT_DIR0,
 607         E20_24XX_MMC_DAT_DIR1,
 608         F18_24XX_MMC_DAT_DIR2,
 609         E18_24XX_MMC_DAT_DIR3,
 610         G18_24XX_MMC_CMD_DIR,
 611         H15_24XX_MMC_CLKI,
 612
 613         /* Full speed USB */
 614         J20_24XX_USB0_PUEN,
 615         J19_24XX_USB0_VP,
 616         K20_24XX_USB0_VM,
 617         J18_24XX_USB0_RCV,
 618         K19_24XX_USB0_TXEN,
 619         J14_24XX_USB0_SE0,
 620         K18_24XX_USB0_DAT,
 621
 622         N14_24XX_USB1_SE0,
 623         W12_24XX_USB1_SE0,
 624         P15_24XX_USB1_DAT,
 625         R13_24XX_USB1_DAT,
 626         W20_24XX_USB1_TXEN,
 627         P13_24XX_USB1_TXEN,
 628         V19_24XX_USB1_RCV,
 629         V12_24XX_USB1_RCV,
 630
 631         AA10_24XX_USB2_SE0,
 632         Y11_24XX_USB2_DAT,
 633         AA12_24XX_USB2_TXEN,
 634         AA6_24XX_USB2_RCV,
 635         AA4_24XX_USB2_TLLSE0,
 636
 637         /* Keypad GPIO*/
 638         T19_24XX_KBR0,
 639         R19_24XX_KBR1,
 640         V18_24XX_KBR2,
 641         M21_24XX_KBR3,
 642         E5__24XX_KBR4,
 643         M18_24XX_KBR5,
 644         R20_24XX_KBC0,
 645         M14_24XX_KBC1,
 646         H19_24XX_KBC2,
 647         V17_24XX_KBC3,
 648         P21_24XX_KBC4,
 649         L14_24XX_KBC5,
 650         N19_24XX_KBC6,
 651
 652         /* 24xx Menelaus Keypad GPIO */
 653         B3__24XX_KBR5,
 654         AA4_24XX_KBC2,
 655         B13_24XX_KBC6,
 656
 657         /* 2430 USB */
 658         AD9_2430_USB0_PUEN,
 659         Y11_2430_USB0_VP,
 660         AD7_2430_USB0_VM,
 661         AE7_2430_USB0_RCV,
 662         AD4_2430_USB0_TXEN,
 663         AF9_2430_USB0_SE0,
 664         AE6_2430_USB0_DAT,
 665         AD24_2430_USB1_SE0,
 666         AB24_2430_USB1_RCV,
 667         Y25_2430_USB1_TXEN,
 668         AA26_2430_USB1_DAT,
 669
 670         /* 2430 HS-USB */
 671         AD9_2430_USB0HS_DATA3,
 672         Y11_2430_USB0HS_DATA4,
 673         AD7_2430_USB0HS_DATA5,
 674         AE7_2430_USB0HS_DATA6,
 675         AD4_2430_USB0HS_DATA2,
 676         AF9_2430_USB0HS_DATA0,
 677         AE6_2430_USB0HS_DATA1,
 678         AE8_2430_USB0HS_CLK,
 679         AD8_2430_USB0HS_DIR,
 680         AE5_2430_USB0HS_STP,
 681         AE9_2430_USB0HS_NXT,
 682         AC7_2430_USB0HS_DATA7,
 683
 684         /* 2430 McBSP */
 685         AD6_2430_MCBSP_CLKS,
 686
 687         AB2_2430_MCBSP1_CLKR,
 688         AD5_2430_MCBSP1_FSR,
 689         AA1_2430_MCBSP1_DX,
 690         AF3_2430_MCBSP1_DR,
 691         AB3_2430_MCBSP1_FSX,
 692         Y9_2430_MCBSP1_CLKX,
 693
 694         AC10_2430_MCBSP2_FSX,
 695         AD16_2430_MCBSP2_CLX,
 696         AE13_2430_MCBSP2_DX,
 697         AD13_2430_MCBSP2_DR,
 698         AC10_2430_MCBSP2_FSX_OFF,
 699         AD16_2430_MCBSP2_CLX_OFF,
 700         AE13_2430_MCBSP2_DX_OFF,
 701         AD13_2430_MCBSP2_DR_OFF,
 702
 703         AC9_2430_MCBSP3_CLKX,
 704         AE4_2430_MCBSP3_FSX,
 705         AE2_2430_MCBSP3_DR,
 706         AF4_2430_MCBSP3_DX,
 707
 708         N3_2430_MCBSP4_CLKX,
 709         AD23_2430_MCBSP4_DR,
 710         AB25_2430_MCBSP4_DX,
 711         AC25_2430_MCBSP4_FSX,
 712
 713         AE16_2430_MCBSP5_CLKX,
 714         AF12_2430_MCBSP5_FSX,
 715         K7_2430_MCBSP5_DX,
 716         M1_2430_MCBSP5_DR,
 717
 718         /* 2430 McSPI*/
 719         Y18_2430_MCSPI1_CLK,
 720         AD15_2430_MCSPI1_SIMO,
 721         AE17_2430_MCSPI1_SOMI,
 722         U1_2430_MCSPI1_CS0,
 723
 724         /* Touchscreen GPIO */
 725         AF19_2430_GPIO_85,
 726
 727 };
 728
 729 enum omap34xx_index {
 730         /* 34xx I2C */
 731         K21_34XX_I2C1_SCL,
 732         J21_34XX_I2C1_SDA,
 733         AF15_34XX_I2C2_SCL,
 734         AE15_34XX_I2C2_SDA,
 735         AF14_34XX_I2C3_SCL,
 736         AG14_34XX_I2C3_SDA,
 737         AD26_34XX_I2C4_SCL,
 738         AE26_34XX_I2C4_SDA,
 739
 740         /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
 741         Y8_3430_USB1HS_PHY_CLK,
 742         Y9_3430_USB1HS_PHY_STP,
 743         AA14_3430_USB1HS_PHY_DIR,
 744         AA11_3430_USB1HS_PHY_NXT,
 745         W13_3430_USB1HS_PHY_DATA0,
 746         W12_3430_USB1HS_PHY_DATA1,
 747         W11_3430_USB1HS_PHY_DATA2,
 748         Y11_3430_USB1HS_PHY_DATA3,
 749         W9_3430_USB1HS_PHY_DATA4,
 750         Y12_3430_USB1HS_PHY_DATA5,
 751         W8_3430_USB1HS_PHY_DATA6,
 752         Y13_3430_USB1HS_PHY_DATA7,
 753
 754         /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
 755         AA8_3430_USB2HS_PHY_CLK,
 756         AA10_3430_USB2HS_PHY_STP,
 757         AA9_3430_USB2HS_PHY_DIR,
 758         AB11_3430_USB2HS_PHY_NXT,
 759         AB10_3430_USB2HS_PHY_DATA0,
 760         AB9_3430_USB2HS_PHY_DATA1,
 761         W3_3430_USB2HS_PHY_DATA2,
 762         T4_3430_USB2HS_PHY_DATA3,
 763         T3_3430_USB2HS_PHY_DATA4,
 764         R3_3430_USB2HS_PHY_DATA5,
 765         R4_3430_USB2HS_PHY_DATA6,
 766         T2_3430_USB2HS_PHY_DATA7,
 767
 768
 769         /* TLL - HSUSB: 12-pin TLL Port 1*/
 770         Y8_3430_USB1HS_TLL_CLK,
 771         Y9_3430_USB1HS_TLL_STP,
 772         AA14_3430_USB1HS_TLL_DIR,
 773         AA11_3430_USB1HS_TLL_NXT,
 774         W13_3430_USB1HS_TLL_DATA0,
 775         W12_3430_USB1HS_TLL_DATA1,
 776         W11_3430_USB1HS_TLL_DATA2,
 777         Y11_3430_USB1HS_TLL_DATA3,
 778         W9_3430_USB1HS_TLL_DATA4,
 779         Y12_3430_USB1HS_TLL_DATA5,
 780         W8_3430_USB1HS_TLL_DATA6,
 781         Y13_3430_USB1HS_TLL_DATA7,
 782
 783         /* TLL - HSUSB: 12-pin TLL Port 2*/
 784         AA8_3430_USB2HS_TLL_CLK,
 785         AA10_3430_USB2HS_TLL_STP,
 786         AA9_3430_USB2HS_TLL_DIR,
 787         AB11_3430_USB2HS_TLL_NXT,
 788         AB10_3430_USB2HS_TLL_DATA0,
 789         AB9_3430_USB2HS_TLL_DATA1,
 790         W3_3430_USB2HS_TLL_DATA2,
 791         T4_3430_USB2HS_TLL_DATA3,
 792         T3_3430_USB2HS_TLL_DATA4,
 793         R3_3430_USB2HS_TLL_DATA5,
 794         R4_3430_USB2HS_TLL_DATA6,
 795         T2_3430_USB2HS_TLL_DATA7,
 796
 797         /* TLL - HSUSB: 12-pin TLL Port 3*/
 798         AA6_3430_USB3HS_TLL_CLK,
 799         AB3_3430_USB3HS_TLL_STP,
 800         AA3_3430_USB3HS_TLL_DIR,
 801         Y3_3430_USB3HS_TLL_NXT,
 802         AA5_3430_USB3HS_TLL_DATA0,
 803         Y4_3430_USB3HS_TLL_DATA1,
 804         Y5_3430_USB3HS_TLL_DATA2,
 805         W5_3430_USB3HS_TLL_DATA3,
 806         AB12_3430_USB3HS_TLL_DATA4,
 807         AB13_3430_USB3HS_TLL_DATA5,
 808         AA13_3430_USB3HS_TLL_DATA6,
 809         AA12_3430_USB3HS_TLL_DATA7,
 810
 811         /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
 812         AF10_3430_USB1FS_PHY_MM1_RXDP,
 813         AG9_3430_USB1FS_PHY_MM1_RXDM,
 814         W13_3430_USB1FS_PHY_MM1_RXRCV,
 815         W12_3430_USB1FS_PHY_MM1_TXSE0,
 816         W11_3430_USB1FS_PHY_MM1_TXDAT,
 817         Y11_3430_USB1FS_PHY_MM1_TXEN_N,
 818
 819         /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
 820         AF7_3430_USB2FS_PHY_MM2_RXDP,
 821         AH7_3430_USB2FS_PHY_MM2_RXDM,
 822         AB10_3430_USB2FS_PHY_MM2_RXRCV,
 823         AB9_3430_USB2FS_PHY_MM2_TXSE0,
 824         W3_3430_USB2FS_PHY_MM2_TXDAT,
 825         T4_3430_USB2FS_PHY_MM2_TXEN_N,
 826
 827         /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
 828         AH3_3430_USB3FS_PHY_MM3_RXDP,
 829         AE3_3430_USB3FS_PHY_MM3_RXDM,
 830         AD1_3430_USB3FS_PHY_MM3_RXRCV,
 831         AE1_3430_USB3FS_PHY_MM3_TXSE0,
 832         AD2_3430_USB3FS_PHY_MM3_TXDAT,
 833         AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 834
 835         /* 34xx GPIO
 836          *  - normally these are bidirectional, no internal pullup/pulldown
 837          *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
 838          *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
 839          *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
 840          */
 841         AF26_34XX_GPIO0,
 842         AF22_34XX_GPIO9,
 843         AH8_34XX_GPIO29,
 844         U8_34XX_GPIO54_OUT,
 845         U8_34XX_GPIO54_DOWN,
 846         L8_34XX_GPIO63,
 847         G25_34XX_GPIO86_OUT,
 848         AG4_34XX_GPIO134_OUT,
 849         AE4_34XX_GPIO136_OUT,
 850         AF6_34XX_GPIO140_UP,
 851         AE6_34XX_GPIO141,
 852         AF5_34XX_GPIO142,
 853         AE5_34XX_GPIO143,
 854         H19_34XX_GPIO164_OUT,
 855         J25_34XX_GPIO170,
 856 };
 857
 858 struct omap_mux_cfg {
 859         struct pin_config       *pins;
 860         unsigned long           size;
 861         int                     (*cfg_reg)(const struct pin_config *cfg);
 862 };
 863
 864 #ifdef  CONFIG_OMAP_MUX
 865 /* setup pin muxing in Linux */
 866 extern int omap1_mux_init(void);
 867 extern int omap2_mux_init(void);
 868 extern int omap_mux_register(struct omap_mux_cfg *);
 869 extern int omap_cfg_reg(unsigned long reg_cfg);
 870 #else
 871 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
 872 static inline int omap1_mux_init(void) { return 0; }
 873 static inline int omap2_mux_init(void) { return 0; }
 874 static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 875 #endif
 876
 877 #endif