arch/arm64/Kconfig.platforms

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 menu "Platform selection"
   3
   4 config ARCH_ACTIONS
   5         bool "Actions Semi Platforms"
   6         select OWL_TIMER
   7         select PINCTRL
   8         help
   9           This enables support for the Actions Semiconductor S900 SoC family.
  10
  11 config ARCH_AGILEX
  12         bool "Intel's Agilex SoCFPGA Family"
  13         help
  14           This enables support for Intel's Agilex SoCFPGA Family.
  15
  16 config ARCH_SUNXI
  17         bool "Allwinner sunxi 64-bit SoC Family"
  18         select ARCH_HAS_RESET_CONTROLLER
  19         select GENERIC_IRQ_CHIP
  20         select PINCTRL
  21         select RESET_CONTROLLER
  22         help
  23           This enables support for Allwinner sunxi based SoCs like the A64.
  24
  25 config ARCH_ALPINE
  26         bool "Annapurna Labs Alpine platform"
  27         select ALPINE_MSI if PCI
  28         help
  29           This enables support for the Annapurna Labs Alpine
  30           Soc family.
  31
  32 config ARCH_BCM2835
  33         bool "Broadcom BCM2835 family"
  34         select TIMER_OF
  35         select GPIOLIB
  36         select MFD_CORE
  37         select PINCTRL
  38         select PINCTRL_BCM2835
  39         select ARM_AMBA
  40         select ARM_GIC
  41         select ARM_TIMER_SP804
  42         help
  43           This enables support for the Broadcom BCM2837 and BCM2711 SoC.
  44           These SoCs are used in the Raspberry Pi 3 and 4 devices.
  45
  46 config ARCH_BCM_IPROC
  47         bool "Broadcom iProc SoC Family"
  48         select COMMON_CLK_IPROC
  49         select GPIOLIB
  50         select PINCTRL
  51         help
  52           This enables support for Broadcom iProc based SoCs
  53
  54 config ARCH_BERLIN
  55         bool "Marvell Berlin SoC Family"
  56         select DW_APB_ICTL
  57         select DW_APB_TIMER_OF
  58         select GPIOLIB
  59         select PINCTRL
  60         help
  61           This enables support for Marvell Berlin SoC Family
  62
  63 config ARCH_BITMAIN
  64         bool "Bitmain SoC Platforms"
  65         help
  66           This enables support for the Bitmain SoC Family.
  67
  68 config ARCH_BRCMSTB
  69         bool "Broadcom Set-Top-Box SoCs"
  70         select ARCH_HAS_RESET_CONTROLLER
  71         select BCM7038_L1_IRQ
  72         select BRCMSTB_L2_IRQ
  73         select GENERIC_IRQ_CHIP
  74         select PINCTRL
  75         help
  76           This enables support for Broadcom's ARMv8 Set Top Box SoCs
  77
  78 config ARCH_EXYNOS
  79         bool "ARMv8 based Samsung Exynos SoC family"
  80         select COMMON_CLK_SAMSUNG
  81         select EXYNOS_CHIPID
  82         select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
  83         select EXYNOS_PMU
  84         select HAVE_S3C_RTC if RTC_CLASS
  85         select PINCTRL
  86         select PINCTRL_EXYNOS
  87         select PM_GENERIC_DOMAINS if PM
  88         select SOC_SAMSUNG
  89         help
  90           This enables support for ARMv8 based Samsung Exynos SoC family.
  91
  92 config ARCH_SPARX5
  93         bool "ARMv8 based Microchip Sparx5 SoC family"
  94         select PINCTRL
  95         select DW_APB_TIMER_OF
  96         help
  97           This enables support for the Microchip Sparx5 ARMv8-based
  98           SoC family of TSN-capable gigabit switches.
  99
 100           The SparX-5 Ethernet switch family provides a rich set of
 101           switching features such as advanced TCAM-based VLAN and QoS
 102           processing enabling delivery of differentiated services, and
 103           security through TCAM-based frame processing using versatile
 104           content aware processor (VCAP).
 105
 106 config ARCH_K3
 107         bool "Texas Instruments Inc. K3 multicore SoC architecture"
 108         select PM_GENERIC_DOMAINS if PM
 109         select MAILBOX
 110         select SOC_TI
 111         select TI_MESSAGE_MANAGER
 112         select TI_SCI_PROTOCOL
 113         select TI_SCI_INTR_IRQCHIP
 114         select TI_SCI_INTA_IRQCHIP
 115         select TI_K3_SOCINFO
 116         help
 117           This enables support for Texas Instruments' K3 multicore SoC
 118           architecture.
 119
 120 config ARCH_LAYERSCAPE
 121         bool "ARMv8 based Freescale Layerscape SoC family"
 122         select EDAC_SUPPORT
 123         help
 124           This enables support for the Freescale Layerscape SoC family.
 125
 126 config ARCH_LG1K
 127         bool "LG Electronics LG1K SoC Family"
 128         help
 129           This enables support for LG Electronics LG1K SoC Family
 130
 131 config ARCH_HISI
 132         bool "Hisilicon SoC Family"
 133         select ARM_TIMER_SP804
 134         select HISILICON_IRQ_MBIGEN if PCI
 135         select PINCTRL
 136         help
 137           This enables support for Hisilicon ARMv8 SoC family
 138
 139 config ARCH_KEEMBAY
 140         bool "Keem Bay SoC"
 141         help
 142           This enables support for Intel Movidius SoC code-named Keem Bay.
 143
 144 config ARCH_MEDIATEK
 145         bool "MediaTek SoC Family"
 146         select ARM_GIC
 147         select PINCTRL
 148         select MTK_TIMER
 149         help
 150           This enables support for MediaTek MT27xx, MT65xx, MT76xx
 151           & MT81xx ARMv8 SoCs
 152
 153 config ARCH_MESON
 154         bool "Amlogic Platforms"
 155         select PINCTRL
 156         select PINCTRL_MESON
 157         select COMMON_CLK_GXBB
 158         select COMMON_CLK_AXG
 159         select COMMON_CLK_G12A
 160         select MESON_IRQ_GPIO
 161         help
 162           This enables support for the arm64 based Amlogic SoCs
 163           such as the s905, S905X/D, S912, A113X/D or S905X/D2
 164
 165 config ARCH_MVEBU
 166         bool "Marvell EBU SoC Family"
 167         select ARMADA_AP806_SYSCON
 168         select ARMADA_CP110_SYSCON
 169         select ARMADA_37XX_CLK
 170         select GPIOLIB
 171         select GPIOLIB_IRQCHIP
 172         select MVEBU_GICP
 173         select MVEBU_ICU
 174         select MVEBU_ODMI
 175         select MVEBU_PIC
 176         select MVEBU_SEI
 177         select OF_GPIO
 178         select PINCTRL
 179         select PINCTRL_ARMADA_37XX
 180         select PINCTRL_ARMADA_AP806
 181         select PINCTRL_ARMADA_CP110
 182         help
 183           This enables support for Marvell EBU familly, including:
 184            - Armada 3700 SoC Family
 185            - Armada 7K SoC Family
 186            - Armada 8K SoC Family
 187
 188 config ARCH_MXC
 189         bool "ARMv8 based NXP i.MX SoC family"
 190         select ARM64_ERRATUM_843419
 191         select ARM64_ERRATUM_845719 if COMPAT
 192         select IMX_GPCV2
 193         select IMX_GPCV2_PM_DOMAINS
 194         select PM
 195         select PM_GENERIC_DOMAINS
 196         select SOC_BUS
 197         select TIMER_IMX_SYS_CTR
 198         help
 199           This enables support for the ARMv8 based SoCs in the
 200           NXP i.MX family.
 201
 202 config ARCH_QCOM
 203         bool "Qualcomm Platforms"
 204         select GPIOLIB
 205         select PINCTRL
 206         help
 207           This enables support for the ARMv8 based Qualcomm chipsets.
 208
 209 config ARCH_REALTEK
 210         bool "Realtek Platforms"
 211         select RESET_CONTROLLER
 212         help
 213           This enables support for the ARMv8 based Realtek chipsets,
 214           like the RTD1295.
 215
 216 config ARCH_RENESAS
 217         bool "Renesas SoC Platforms"
 218         select GPIOLIB
 219         select PINCTRL
 220         select SOC_BUS
 221         help
 222           This enables support for the ARMv8 based Renesas SoCs.
 223
 224 config ARCH_ROCKCHIP
 225         bool "Rockchip Platforms"
 226         select ARCH_HAS_RESET_CONTROLLER
 227         select GPIOLIB
 228         select PINCTRL
 229         select PINCTRL_ROCKCHIP
 230         select PM
 231         select ROCKCHIP_TIMER
 232         help
 233           This enables support for the ARMv8 based Rockchip chipsets,
 234           like the RK3368.
 235
 236 config ARCH_S32
 237         bool "NXP S32 SoC Family"
 238         help
 239           This enables support for the NXP S32 family of processors.
 240
 241 config ARCH_SEATTLE
 242         bool "AMD Seattle SoC Family"
 243         help
 244           This enables support for AMD Seattle SOC Family
 245
 246 config ARCH_STRATIX10
 247         bool "Altera's Stratix 10 SoCFPGA Family"
 248         help
 249           This enables support for Altera's Stratix 10 SoCFPGA Family.
 250
 251 config ARCH_SYNQUACER
 252         bool "Socionext SynQuacer SoC Family"
 253
 254 config ARCH_TEGRA
 255         bool "NVIDIA Tegra SoC Family"
 256         select ARCH_HAS_RESET_CONTROLLER
 257         select ARM_GIC_PM
 258         select CLKSRC_MMIO
 259         select TIMER_OF
 260         select GENERIC_CLOCKEVENTS
 261         select GPIOLIB
 262         select PINCTRL
 263         select PM
 264         select PM_GENERIC_DOMAINS
 265         select RESET_CONTROLLER
 266         help
 267           This enables support for the NVIDIA Tegra SoC family.
 268
 269 config ARCH_SPRD
 270         bool "Spreadtrum SoC platform"
 271         help
 272           Support for Spreadtrum ARM based SoCs
 273
 274 config ARCH_THUNDER
 275         bool "Cavium Inc. Thunder SoC Family"
 276         help
 277           This enables support for Cavium's Thunder Family of SoCs.
 278
 279 config ARCH_THUNDER2
 280         bool "Cavium ThunderX2 Server Processors"
 281         select GPIOLIB
 282         help
 283           This enables support for Cavium's ThunderX2 CN99XX family of
 284           server processors.
 285
 286 config ARCH_UNIPHIER
 287         bool "Socionext UniPhier SoC Family"
 288         select ARCH_HAS_RESET_CONTROLLER
 289         select PINCTRL
 290         select RESET_CONTROLLER
 291         help
 292           This enables support for Socionext UniPhier SoC family.
 293
 294 config ARCH_VEXPRESS
 295         bool "ARMv8 software model (Versatile Express)"
 296         select GPIOLIB
 297         select PM
 298         select PM_GENERIC_DOMAINS
 299         help
 300           This enables support for the ARMv8 software model (Versatile
 301           Express).
 302
 303 config ARCH_VISCONTI
 304         bool "Toshiba Visconti SoC Family"
 305         select PINCTRL
 306         select PINCTRL_VISCONTI
 307         help
 308           This enables support for Toshiba Visconti SoCs Family.
 309
 310 config ARCH_VULCAN
 311         def_bool n
 312
 313 config ARCH_XGENE
 314         bool "AppliedMicro X-Gene SOC Family"
 315         help
 316           This enables support for AppliedMicro X-Gene SOC Family
 317
 318 config ARCH_ZX
 319         bool "ZTE ZX SoC Family"
 320         select PINCTRL
 321         help
 322           This enables support for ZTE ZX SoC Family
 323
 324 config ARCH_ZYNQMP
 325         bool "Xilinx ZynqMP Family"
 326         help
 327           This enables support for Xilinx ZynqMP Family
 328
 329 endmenu