2 * ARM Ltd. Juno Platform
4 * Copyright (c) 2013-2014 ARM Ltd.
6 * This file is licensed under a dual GPLv2 or BSD license.
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
14 model = "ARM Juno development board (r0)";
15 compatible = "arm,juno", "arm,vexpress";
16 interrupt-parent = <&gic>;
25 stdout-path = "serial0:115200n8";
29 compatible = "arm,psci-0.2";
38 compatible = "arm,cortex-a57","arm,armv8";
41 enable-method = "psci";
42 next-level-cache = <&A57_L2>;
46 compatible = "arm,cortex-a57","arm,armv8";
49 enable-method = "psci";
50 next-level-cache = <&A57_L2>;
54 compatible = "arm,cortex-a53","arm,armv8";
57 enable-method = "psci";
58 next-level-cache = <&A53_L2>;
62 compatible = "arm,cortex-a53","arm,armv8";
65 enable-method = "psci";
66 next-level-cache = <&A53_L2>;
70 compatible = "arm,cortex-a53","arm,armv8";
73 enable-method = "psci";
74 next-level-cache = <&A53_L2>;
78 compatible = "arm,cortex-a53","arm,armv8";
81 enable-method = "psci";
82 next-level-cache = <&A53_L2>;
95 device_type = "memory";
96 /* last 16MB of the first memory area is reserved for secure world use by firmware */
97 reg = <0x00000000 0x80000000 0x0 0x7f000000>,
98 <0x00000008 0x80000000 0x1 0x80000000>;
101 gic: interrupt-controller@2c001000 {
102 compatible = "arm,gic-400", "arm,cortex-a15-gic";
103 reg = <0x0 0x2c010000 0 0x1000>,
104 <0x0 0x2c02f000 0 0x2000>,
105 <0x0 0x2c04f000 0 0x2000>,
106 <0x0 0x2c06f000 0 0x2000>;
107 #address-cells = <0>;
108 #interrupt-cells = <3>;
109 interrupt-controller;
110 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
114 compatible = "arm,armv8-timer";
115 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
116 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
117 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
118 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
122 compatible = "arm,armv8-pmuv3";
123 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
124 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
125 <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
126 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
127 <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
128 <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
131 /include/ "juno-clocks.dtsi"
134 compatible = "arm,pl330", "arm,primecell";
135 reg = <0x0 0x7ff00000 0 0x1000>;
138 #dma-requests = <32>;
139 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
140 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
141 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
142 <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
143 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
144 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
145 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
146 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
147 clocks = <&soc_faxiclk>;
148 clock-names = "apb_pclk";
151 soc_uart0: uart@7ff80000 {
152 compatible = "arm,pl011", "arm,primecell";
153 reg = <0x0 0x7ff80000 0x0 0x1000>;
154 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
155 clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
156 clock-names = "uartclk", "apb_pclk";
160 compatible = "snps,designware-i2c";
161 reg = <0x0 0x7ffa0000 0x0 0x1000>;
162 #address-cells = <1>;
164 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
165 clock-frequency = <400000>;
166 i2c-sda-hold-time-ns = <500>;
167 clocks = <&soc_smc50mhz>;
169 dvi0: dvi-transmitter@70 {
170 compatible = "nxp,tda998x";
174 dvi1: dvi-transmitter@71 {
175 compatible = "nxp,tda998x";
181 compatible = "generic-ohci";
182 reg = <0x0 0x7ffb0000 0x0 0x10000>;
183 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
184 clocks = <&soc_usb48mhz>;
188 compatible = "generic-ehci";
189 reg = <0x0 0x7ffc0000 0x0 0x10000>;
190 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
191 clocks = <&soc_usb48mhz>;
194 memory-controller@7ffd0000 {
195 compatible = "arm,pl354", "arm,primecell";
196 reg = <0 0x7ffd0000 0 0x1000>;
197 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
198 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
199 clocks = <&soc_smc50mhz>;
200 clock-names = "apb_pclk";
204 compatible = "simple-bus";
205 #address-cells = <2>;
207 ranges = <0 0 0 0x08000000 0x04000000>,
208 <1 0 0 0x14000000 0x04000000>,
209 <2 0 0 0x18000000 0x04000000>,
210 <3 0 0 0x1c000000 0x04000000>,
211 <4 0 0 0x0c000000 0x04000000>,
212 <5 0 0 0x10000000 0x04000000>;
214 #interrupt-cells = <1>;
215 interrupt-map-mask = <0 0 15>;
216 interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
217 <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
218 <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
219 <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
220 <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
221 <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
222 <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
223 <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
224 <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
225 <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
226 <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
227 <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
228 <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
230 /include/ "juno-motherboard.dtsi"