arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /dts-v1/;
   3 /* Copyright (c) 2017, The Linux Foundation. All rights reserved.
   4  */
   5 #include "ipq8074.dtsi"
   6
   7 / {
   8         #address-cells = <0x2>;
   9         #size-cells = <0x2>;
  10         model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
  11         compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
  12         interrupt-parent = <&intc>;
  13
  14         aliases {
  15                 serial0 = &blsp1_uart5;
  16                 serial1 = &blsp1_uart3;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0";
  21         };
  22
  23         memory {
  24                 device_type = "memory";
  25                 reg = <0x0 0x40000000 0x0 0x20000000>;
  26         };
  27
  28         soc {
  29                 serial@78b3000 {
  30                         status = "ok";
  31                 };
  32
  33                 spi@78b5000 {
  34                         status = "ok";
  35
  36                         m25p80@0 {
  37                                   #address-cells = <1>;
  38                                   #size-cells = <1>;
  39                                   compatible = "jedec,spi-nor";
  40                                   reg = <0>;
  41                                   spi-max-frequency = <50000000>;
  42                         };
  43                 };
  44
  45                 serial@78b1000 {
  46                          status = "ok";
  47                 };
  48
  49                 i2c@78b6000 {
  50                          status = "ok";
  51                 };
  52
  53                 dma@7984000 {
  54                          status = "ok";
  55                 };
  56
  57                 nand@79b0000 {
  58                         status = "ok";
  59
  60                         nand@0 {
  61                                 reg = <0>;
  62                                 nand-ecc-strength = <4>;
  63                                 nand-ecc-step-size = <512>;
  64                                 nand-bus-width = <8>;
  65                         };
  66                 };
  67
  68                 phy@86000 {
  69                         status = "ok";
  70                 };
  71
  72                 phy@8e000 {
  73                         status = "ok";
  74                 };
  75
  76                 pci@20000000 {
  77                         status = "ok";
  78                         perst-gpio = <&tlmm 58 0x1>;
  79                 };
  80
  81                 pci@10000000 {
  82                         status = "ok";
  83                         perst-gpio = <&tlmm 61 0x1>;
  84                 };
  85         };
  86 };