]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
[mirror_ubuntu-bionic-kernel.git] / arch / arm64 / boot / dts / rockchip / rk3328-rock64.dts
1 /*
2 * Copyright (c) 2017 PINE64
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43 /dts-v1/;
44 #include "rk3328.dtsi"
45
46 / {
47 model = "Pine64 Rock64";
48 compatible = "pine64,rock64", "rockchip,rk3328";
49
50 chosen {
51 stdout-path = "serial2:1500000n8";
52 };
53
54 gmac_clkin: external-gmac-clock {
55 compatible = "fixed-clock";
56 clock-frequency = <125000000>;
57 clock-output-names = "gmac_clkin";
58 #clock-cells = <0>;
59 };
60
61 vcc_sd: sdmmc-regulator {
62 compatible = "regulator-fixed";
63 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
64 pinctrl-names = "default";
65 pinctrl-0 = <&sdmmc0m1_gpio>;
66 regulator-name = "vcc_sd";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
69 vin-supply = <&vcc_io>;
70 };
71
72 vcc_host_5v: vcc-host-5v-regulator {
73 compatible = "regulator-fixed";
74 enable-active-high;
75 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
76 pinctrl-names = "default";
77 pinctrl-0 = <&usb30_host_drv>;
78 regulator-name = "vcc_host_5v";
79 regulator-always-on;
80 vin-supply = <&vcc_sys>;
81 };
82
83 vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
84 compatible = "regulator-fixed";
85 enable-active-high;
86 gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&usb20_host_drv>;
89 regulator-name = "vcc_host1_5v";
90 regulator-always-on;
91 vin-supply = <&vcc_sys>;
92 };
93
94 vcc_sys: vcc-sys {
95 compatible = "regulator-fixed";
96 regulator-name = "vcc_sys";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
101 };
102 };
103
104 &cpu0 {
105 cpu-supply = <&vdd_arm>;
106 };
107
108 &cpu1 {
109 cpu-supply = <&vdd_arm>;
110 };
111
112 &cpu2 {
113 cpu-supply = <&vdd_arm>;
114 };
115
116 &cpu3 {
117 cpu-supply = <&vdd_arm>;
118 };
119
120 &emmc {
121 bus-width = <8>;
122 cap-mmc-highspeed;
123 non-removable;
124 pinctrl-names = "default";
125 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
126 vmmc-supply = <&vcc_io>;
127 vqmmc-supply = <&vcc18_emmc>;
128 status = "okay";
129 };
130
131 &gmac2io {
132 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
133 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
134 clock_in_out = "input";
135 /* shows instability at 1GBit right now */
136 max-speed = <100>;
137 phy-supply = <&vcc_io>;
138 phy-mode = "rgmii";
139 pinctrl-names = "default";
140 pinctrl-0 = <&rgmiim1_pins>;
141 snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
142 snps,reset-active-low;
143 snps,reset-delays-us = <0 10000 50000>;
144 tx_delay = <0x26>;
145 rx_delay = <0x11>;
146 status = "okay";
147 };
148
149 &i2c1 {
150 status = "okay";
151
152 rk805: rk805@18 {
153 compatible = "rockchip,rk805";
154 reg = <0x18>;
155 interrupt-parent = <&gpio2>;
156 interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
157 #clock-cells = <1>;
158 clock-output-names = "xin32k", "rk805-clkout2";
159 pinctrl-names = "default";
160 pinctrl-0 = <&pmic_int_l>;
161 rockchip,system-power-controller;
162 wakeup-source;
163
164 vcc1-supply = <&vcc_sys>;
165 vcc2-supply = <&vcc_sys>;
166 vcc3-supply = <&vcc_sys>;
167 vcc4-supply = <&vcc_sys>;
168 vcc5-supply = <&vcc_io>;
169 vcc6-supply = <&vcc_sys>;
170
171 regulators {
172 vdd_logic: DCDC_REG1 {
173 regulator-name = "vdd_logic";
174 regulator-min-microvolt = <712500>;
175 regulator-max-microvolt = <1450000>;
176 regulator-ramp-delay = <12500>;
177 regulator-always-on;
178 regulator-boot-on;
179 regulator-state-mem {
180 regulator-on-in-suspend;
181 regulator-suspend-microvolt = <1000000>;
182 };
183 };
184
185 vdd_arm: DCDC_REG2 {
186 regulator-name = "vdd_arm";
187 regulator-min-microvolt = <712500>;
188 regulator-max-microvolt = <1450000>;
189 regulator-ramp-delay = <12500>;
190 regulator-always-on;
191 regulator-boot-on;
192 regulator-state-mem {
193 regulator-on-in-suspend;
194 regulator-suspend-microvolt = <950000>;
195 };
196 };
197
198 vcc_ddr: DCDC_REG3 {
199 regulator-name = "vcc_ddr";
200 regulator-always-on;
201 regulator-boot-on;
202 regulator-state-mem {
203 regulator-on-in-suspend;
204 };
205 };
206
207 vcc_io: DCDC_REG4 {
208 regulator-name = "vcc_io";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 regulator-always-on;
212 regulator-boot-on;
213 regulator-state-mem {
214 regulator-on-in-suspend;
215 regulator-suspend-microvolt = <3300000>;
216 };
217 };
218
219 vcc_18: LDO_REG1 {
220 regulator-name = "vdd_18";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-always-on;
224 regulator-boot-on;
225 regulator-state-mem {
226 regulator-on-in-suspend;
227 regulator-suspend-microvolt = <1800000>;
228 };
229 };
230
231 vcc18_emmc: LDO_REG2 {
232 regulator-name = "vcc_18emmc";
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235 regulator-always-on;
236 regulator-boot-on;
237 regulator-state-mem {
238 regulator-on-in-suspend;
239 regulator-suspend-microvolt = <1800000>;
240 };
241 };
242
243 vdd_10: LDO_REG3 {
244 regulator-name = "vdd_10";
245 regulator-min-microvolt = <1000000>;
246 regulator-max-microvolt = <1000000>;
247 regulator-always-on;
248 regulator-boot-on;
249 regulator-state-mem {
250 regulator-on-in-suspend;
251 regulator-suspend-microvolt = <1000000>;
252 };
253 };
254 };
255 };
256 };
257
258 &io_domains {
259 status = "okay";
260
261 vccio1-supply = <&vcc_io>;
262 vccio2-supply = <&vcc18_emmc>;
263 vccio3-supply = <&vcc_io>;
264 vccio4-supply = <&vcc_18>;
265 vccio5-supply = <&vcc_io>;
266 vccio6-supply = <&vcc_io>;
267 pmuio-supply = <&vcc_io>;
268 };
269
270 &pinctrl {
271 pmic {
272 pmic_int_l: pmic-int-l {
273 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
274 };
275 };
276
277 usb2 {
278 usb20_host_drv: usb20-host-drv {
279 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
280 };
281 };
282
283 usb3 {
284 usb30_host_drv: usb30-host-drv {
285 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
286 };
287 };
288 };
289
290 &sdmmc {
291 bus-width = <4>;
292 cap-mmc-highspeed;
293 cap-sd-highspeed;
294 disable-wp;
295 max-frequency = <150000000>;
296 pinctrl-names = "default";
297 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
298 vmmc-supply = <&vcc_sd>;
299 status = "okay";
300 };
301
302 &tsadc {
303 rockchip,hw-tshut-mode = <0>;
304 rockchip,hw-tshut-polarity = <0>;
305 status = "okay";
306 };
307
308 &uart2 {
309 status = "okay";
310 };
311
312 &u2phy {
313 status = "okay";
314
315 u2phy_host: host-port {
316 status = "okay";
317 };
318
319 u2phy_otg: otg-port {
320 status = "okay";
321 };
322 };
323
324 &usb20_otg {
325 dr_mode = "host";
326 status = "okay";
327 };
328
329 &usb_host0_ehci {
330 status = "okay";
331 };
332
333 &usb_host0_ohci {
334 status = "okay";
335 };