arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * dts file for Xilinx ZynqMP ZCU106
   4  *
   5  * (C) Copyright 2016, Xilinx, Inc.
   6  *
   7  * Michal Simek <michal.simek@xilinx.com>
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "zynqmp.dtsi"
  13 #include "zynqmp-clk.dtsi"
  14 #include <dt-bindings/input/input.h>
  15 #include <dt-bindings/gpio/gpio.h>
  16
  17 / {
  18         model = "ZynqMP ZCU106 RevA";
  19         compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
  20
  21         aliases {
  22                 ethernet0 = &gem3;
  23                 i2c0 = &i2c0;
  24                 i2c1 = &i2c1;
  25                 mmc0 = &sdhci1;
  26                 rtc0 = &rtc;
  27                 serial0 = &uart0;
  28                 serial1 = &uart1;
  29                 serial2 = &dcc;
  30         };
  31
  32         chosen {
  33                 bootargs = "earlycon";
  34                 stdout-path = "serial0:115200n8";
  35         };
  36
  37         memory@0 {
  38                 device_type = "memory";
  39                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
  40         };
  41
  42         gpio-keys {
  43                 compatible = "gpio-keys";
  44                 autorepeat;
  45                 sw19 {
  46                         label = "sw19";
  47                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  48                         linux,code = <KEY_DOWN>;
  49                         wakeup-source;
  50                         autorepeat;
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56                 heartbeat-led {
  57                         label = "heartbeat";
  58                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  59                         linux,default-trigger = "heartbeat";
  60                 };
  61         };
  62 };
  63
  64 &can1 {
  65         status = "okay";
  66 };
  67
  68 &dcc {
  69         status = "okay";
  70 };
  71
  72 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
  73 &fpd_dma_chan1 {
  74         status = "okay";
  75 };
  76
  77 &fpd_dma_chan2 {
  78         status = "okay";
  79 };
  80
  81 &fpd_dma_chan3 {
  82         status = "okay";
  83 };
  84
  85 &fpd_dma_chan4 {
  86         status = "okay";
  87 };
  88
  89 &fpd_dma_chan5 {
  90         status = "okay";
  91 };
  92
  93 &fpd_dma_chan6 {
  94         status = "okay";
  95 };
  96
  97 &fpd_dma_chan7 {
  98         status = "okay";
  99 };
 100
 101 &fpd_dma_chan8 {
 102         status = "okay";
 103 };
 104
 105 &gem3 {
 106         status = "okay";
 107         phy-handle = <&phy0>;
 108         phy-mode = "rgmii-id";
 109         phy0: phy@c {
 110                 reg = <0xc>;
 111                 ti,rx-internal-delay = <0x8>;
 112                 ti,tx-internal-delay = <0xa>;
 113                 ti,fifo-depth = <0x1>;
 114                 ti,dp83867-rxctrl-strap-quirk;
 115         };
 116 };
 117
 118 &gpio {
 119         status = "okay";
 120 };
 121
 122 &i2c0 {
 123         status = "okay";
 124         clock-frequency = <400000>;
 125
 126         tca6416_u97: gpio@20 {
 127                 compatible = "ti,tca6416";
 128                 reg = <0x20>;
 129                 gpio-controller; /* interrupt not connected */
 130                 #gpio-cells = <2>;
 131                 /*
 132                  * IRQ not connected
 133                  * Lines:
 134                  * 0 - SFP_SI5328_INT_ALM
 135                  * 1 - HDMI_SI5328_INT_ALM
 136                  * 5 - IIC_MUX_RESET_B
 137                  * 6 - GEM3_EXP_RESET_B
 138                  * 10 - FMC_HPC0_PRSNT_M2C_B
 139                  * 11 - FMC_HPC1_PRSNT_M2C_B
 140                  * 2-4, 7, 12-17 - not connected
 141                  */
 142         };
 143
 144         tca6416_u61: gpio@21 {
 145                 compatible = "ti,tca6416";
 146                 reg = <0x21>;
 147                 gpio-controller;
 148                 #gpio-cells = <2>;
 149                 /*
 150                  * IRQ not connected
 151                  * Lines:
 152                  * 0 - VCCPSPLL_EN
 153                  * 1 - MGTRAVCC_EN
 154                  * 2 - MGTRAVTT_EN
 155                  * 3 - VCCPSDDRPLL_EN
 156                  * 4 - MIO26_PMU_INPUT_LS
 157                  * 5 - PL_PMBUS_ALERT
 158                  * 6 - PS_PMBUS_ALERT
 159                  * 7 - MAXIM_PMBUS_ALERT
 160                  * 10 - PL_DDR4_VTERM_EN
 161                  * 11 - PL_DDR4_VPP_2V5_EN
 162                  * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
 163                  * 13 - PS_DIMM_SUSPEND_EN
 164                  * 14 - PS_DDR4_VTERM_EN
 165                  * 15 - PS_DDR4_VPP_2V5_EN
 166                  * 16 - 17 - not connected
 167                  */
 168         };
 169
 170         i2c-mux@75 { /* u60 */
 171                 compatible = "nxp,pca9544";
 172                 #address-cells = <1>;
 173                 #size-cells = <0>;
 174                 reg = <0x75>;
 175                 i2c@0 {
 176                         #address-cells = <1>;
 177                         #size-cells = <0>;
 178                         reg = <0>;
 179                         /* PS_PMBUS */
 180                         ina226@40 { /* u76 */
 181                                 compatible = "ti,ina226";
 182                                 reg = <0x40>;
 183                                 shunt-resistor = <5000>;
 184                         };
 185                         ina226@41 { /* u77 */
 186                                 compatible = "ti,ina226";
 187                                 reg = <0x41>;
 188                                 shunt-resistor = <5000>;
 189                         };
 190                         ina226@42 { /* u78 */
 191                                 compatible = "ti,ina226";
 192                                 reg = <0x42>;
 193                                 shunt-resistor = <5000>;
 194                         };
 195                         ina226@43 { /* u87 */
 196                                 compatible = "ti,ina226";
 197                                 reg = <0x43>;
 198                                 shunt-resistor = <5000>;
 199                         };
 200                         ina226@44 { /* u85 */
 201                                 compatible = "ti,ina226";
 202                                 reg = <0x44>;
 203                                 shunt-resistor = <5000>;
 204                         };
 205                         ina226@45 { /* u86 */
 206                                 compatible = "ti,ina226";
 207                                 reg = <0x45>;
 208                                 shunt-resistor = <5000>;
 209                         };
 210                         ina226@46 { /* u93 */
 211                                 compatible = "ti,ina226";
 212                                 reg = <0x46>;
 213                                 shunt-resistor = <5000>;
 214                         };
 215                         ina226@47 { /* u88 */
 216                                 compatible = "ti,ina226";
 217                                 reg = <0x47>;
 218                                 shunt-resistor = <5000>;
 219                         };
 220                         ina226@4a { /* u15 */
 221                                 compatible = "ti,ina226";
 222                                 reg = <0x4a>;
 223                                 shunt-resistor = <5000>;
 224                         };
 225                         ina226@4b { /* u92 */
 226                                 compatible = "ti,ina226";
 227                                 reg = <0x4b>;
 228                                 shunt-resistor = <5000>;
 229                         };
 230                 };
 231                 i2c@1 {
 232                         #address-cells = <1>;
 233                         #size-cells = <0>;
 234                         reg = <1>;
 235                         /* PL_PMBUS */
 236                         ina226@40 { /* u79 */
 237                                 compatible = "ti,ina226";
 238                                 reg = <0x40>;
 239                                 shunt-resistor = <2000>;
 240                         };
 241                         ina226@41 { /* u81 */
 242                                 compatible = "ti,ina226";
 243                                 reg = <0x41>;
 244                                 shunt-resistor = <5000>;
 245                         };
 246                         ina226@42 { /* u80 */
 247                                 compatible = "ti,ina226";
 248                                 reg = <0x42>;
 249                                 shunt-resistor = <5000>;
 250                         };
 251                         ina226@43 { /* u84 */
 252                                 compatible = "ti,ina226";
 253                                 reg = <0x43>;
 254                                 shunt-resistor = <5000>;
 255                         };
 256                         ina226@44 { /* u16 */
 257                                 compatible = "ti,ina226";
 258                                 reg = <0x44>;
 259                                 shunt-resistor = <5000>;
 260                         };
 261                         ina226@45 { /* u65 */
 262                                 compatible = "ti,ina226";
 263                                 reg = <0x45>;
 264                                 shunt-resistor = <5000>;
 265                         };
 266                         ina226@46 { /* u74 */
 267                                 compatible = "ti,ina226";
 268                                 reg = <0x46>;
 269                                 shunt-resistor = <5000>;
 270                         };
 271                         ina226@47 { /* u75 */
 272                                 compatible = "ti,ina226";
 273                                 reg = <0x47>;
 274                                 shunt-resistor = <5000>;
 275                         };
 276                 };
 277                 i2c@2 {
 278                         #address-cells = <1>;
 279                         #size-cells = <0>;
 280                         reg = <2>;
 281                         /* MAXIM_PMBUS - 00 */
 282                         max15301@a { /* u46 */
 283                                 compatible = "maxim,max15301";
 284                                 reg = <0xa>;
 285                         };
 286                         max15303@b { /* u4 */
 287                                 compatible = "maxim,max15303";
 288                                 reg = <0xb>;
 289                         };
 290                         max15303@10 { /* u13 */
 291                                 compatible = "maxim,max15303";
 292                                 reg = <0x10>;
 293                         };
 294                         max15301@13 { /* u47 */
 295                                 compatible = "maxim,max15301";
 296                                 reg = <0x13>;
 297                         };
 298                         max15303@14 { /* u7 */
 299                                 compatible = "maxim,max15303";
 300                                 reg = <0x14>;
 301                         };
 302                         max15303@15 { /* u6 */
 303                                 compatible = "maxim,max15303";
 304                                 reg = <0x15>;
 305                         };
 306                         max15303@16 { /* u10 */
 307                                 compatible = "maxim,max15303";
 308                                 reg = <0x16>;
 309                         };
 310                         max15303@17 { /* u9 */
 311                                 compatible = "maxim,max15303";
 312                                 reg = <0x17>;
 313                         };
 314                         max15301@18 { /* u63 */
 315                                 compatible = "maxim,max15301";
 316                                 reg = <0x18>;
 317                         };
 318                         max15303@1a { /* u49 */
 319                                 compatible = "maxim,max15303";
 320                                 reg = <0x1a>;
 321                         };
 322                         max15303@1b { /* u8 */
 323                                 compatible = "maxim,max15303";
 324                                 reg = <0x1b>;
 325                         };
 326                         max15303@1d { /* u18 */
 327                                 compatible = "maxim,max15303";
 328                                 reg = <0x1d>;
 329                         };
 330
 331                         max20751@72 { /* u95 */
 332                                 compatible = "maxim,max20751";
 333                                 reg = <0x72>;
 334                         };
 335                         max20751@73 { /* u96 */
 336                                 compatible = "maxim,max20751";
 337                                 reg = <0x73>;
 338                         };
 339                 };
 340                 /* Bus 3 is not connected */
 341         };
 342 };
 343
 344 &i2c1 {
 345         status = "okay";
 346         clock-frequency = <400000>;
 347
 348         /* PL i2c via PCA9306 - u45 */
 349         i2c-mux@74 { /* u34 */
 350                 compatible = "nxp,pca9548";
 351                 #address-cells = <1>;
 352                 #size-cells = <0>;
 353                 reg = <0x74>;
 354                 i2c@0 {
 355                         #address-cells = <1>;
 356                         #size-cells = <0>;
 357                         reg = <0>;
 358                         /*
 359                          * IIC_EEPROM 1kB memory which uses 256B blocks
 360                          * where every block has different address.
 361                          *    0 - 256B address 0x54
 362                          * 256B - 512B address 0x55
 363                          * 512B - 768B address 0x56
 364                          * 768B - 1024B address 0x57
 365                          */
 366                         eeprom: eeprom@54 { /* u23 */
 367                                 compatible = "atmel,24c08";
 368                                 reg = <0x54>;
 369                         };
 370                 };
 371                 i2c@1 {
 372                         #address-cells = <1>;
 373                         #size-cells = <0>;
 374                         reg = <1>;
 375                         si5341: clock-generator@36 { /* SI5341 - u69 */
 376                                 reg = <0x36>;
 377                         };
 378
 379                 };
 380                 i2c@2 {
 381                         #address-cells = <1>;
 382                         #size-cells = <0>;
 383                         reg = <2>;
 384                         si570_1: clock-generator@5d { /* USER SI570 - u42 */
 385                                 #clock-cells = <0>;
 386                                 compatible = "silabs,si570";
 387                                 reg = <0x5d>;
 388                                 temperature-stability = <50>;
 389                                 factory-fout = <300000000>;
 390                                 clock-frequency = <300000000>;
 391                         };
 392                 };
 393                 i2c@3 {
 394                         #address-cells = <1>;
 395                         #size-cells = <0>;
 396                         reg = <3>;
 397                         si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
 398                                 #clock-cells = <0>;
 399                                 compatible = "silabs,si570";
 400                                 reg = <0x5d>;
 401                                 temperature-stability = <50>; /* copy from zc702 */
 402                                 factory-fout = <156250000>;
 403                                 clock-frequency = <148500000>;
 404                         };
 405                 };
 406                 i2c@4 {
 407                         #address-cells = <1>;
 408                         #size-cells = <0>;
 409                         reg = <4>;
 410                         si5328: clock-generator@69 {/* SI5328 - u20 */
 411                                 reg = <0x69>;
 412                         };
 413                 };
 414                 i2c@5 {
 415                         #address-cells = <1>;
 416                         #size-cells = <0>;
 417                         reg = <5>; /* FAN controller */
 418                         temp@4c {/* lm96163 - u128 */
 419                                 compatible = "national,lm96163";
 420                                 reg = <0x4c>;
 421                         };
 422                 };
 423                 /* 6 - 7 unconnected */
 424         };
 425
 426         i2c-mux@75 {
 427                 compatible = "nxp,pca9548"; /* u135 */
 428                 #address-cells = <1>;
 429                 #size-cells = <0>;
 430                 reg = <0x75>;
 431
 432                 i2c@0 {
 433                         #address-cells = <1>;
 434                         #size-cells = <0>;
 435                         reg = <0>;
 436                         /* HPC0_IIC */
 437                 };
 438                 i2c@1 {
 439                         #address-cells = <1>;
 440                         #size-cells = <0>;
 441                         reg = <1>;
 442                         /* HPC1_IIC */
 443                 };
 444                 i2c@2 {
 445                         #address-cells = <1>;
 446                         #size-cells = <0>;
 447                         reg = <2>;
 448                         /* SYSMON */
 449                 };
 450                 i2c@3 {
 451                         #address-cells = <1>;
 452                         #size-cells = <0>;
 453                         reg = <3>;
 454                         /* DDR4 SODIMM */
 455                 };
 456                 i2c@4 {
 457                         #address-cells = <1>;
 458                         #size-cells = <0>;
 459                         reg = <4>;
 460                         /* SEP 3 */
 461                 };
 462                 i2c@5 {
 463                         #address-cells = <1>;
 464                         #size-cells = <0>;
 465                         reg = <5>;
 466                         /* SEP 2 */
 467                 };
 468                 i2c@6 {
 469                         #address-cells = <1>;
 470                         #size-cells = <0>;
 471                         reg = <6>;
 472                         /* SEP 1 */
 473                 };
 474                 i2c@7 {
 475                         #address-cells = <1>;
 476                         #size-cells = <0>;
 477                         reg = <7>;
 478                         /* SEP 0 */
 479                 };
 480         };
 481 };
 482
 483 &rtc {
 484         status = "okay";
 485 };
 486
 487 &sata {
 488         status = "okay";
 489         /* SATA OOB timing settings */
 490         ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 491         ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 492         ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 493         ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 494         ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 495         ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 496         ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 497         ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 498 };
 499
 500 /* SD1 with level shifter */
 501 &sdhci1 {
 502         status = "okay";
 503         no-1-8-v;
 504 };
 505
 506 &uart0 {
 507         status = "okay";
 508 };
 509
 510 &uart1 {
 511         status = "okay";
 512 };
 513
 514 /* ULPI SMSC USB3320 */
 515 &usb0 {
 516         status = "okay";
 517 };
 518
 519 &watchdog0 {
 520         status = "okay";
 521 };