]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - arch/arm64/kernel/relocate_kernel.S
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
[mirror_ubuntu-hirsute-kernel.git] / arch / arm64 / kernel / relocate_kernel.S
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * kexec for arm64
4 *
5 * Copyright (C) Linaro.
6 * Copyright (C) Huawei Futurewei Technologies.
7 */
8
9 #include <linux/kexec.h>
10 #include <linux/linkage.h>
11
12 #include <asm/assembler.h>
13 #include <asm/kexec.h>
14 #include <asm/page.h>
15 #include <asm/sysreg.h>
16
17 /*
18 * arm64_relocate_new_kernel - Put a 2nd stage image in place and boot it.
19 *
20 * The memory that the old kernel occupies may be overwritten when coping the
21 * new image to its final location. To assure that the
22 * arm64_relocate_new_kernel routine which does that copy is not overwritten,
23 * all code and data needed by arm64_relocate_new_kernel must be between the
24 * symbols arm64_relocate_new_kernel and arm64_relocate_new_kernel_end. The
25 * machine_kexec() routine will copy arm64_relocate_new_kernel to the kexec
26 * control_code_page, a special page which has been set up to be preserved
27 * during the copy operation.
28 */
29 ENTRY(arm64_relocate_new_kernel)
30
31 /* Setup the list loop variables. */
32 mov x18, x2 /* x18 = dtb address */
33 mov x17, x1 /* x17 = kimage_start */
34 mov x16, x0 /* x16 = kimage_head */
35 raw_dcache_line_size x15, x0 /* x15 = dcache line size */
36 mov x14, xzr /* x14 = entry ptr */
37 mov x13, xzr /* x13 = copy dest */
38
39 /* Clear the sctlr_el2 flags. */
40 mrs x0, CurrentEL
41 cmp x0, #CurrentEL_EL2
42 b.ne 1f
43 mrs x0, sctlr_el2
44 ldr x1, =SCTLR_ELx_FLAGS
45 bic x0, x0, x1
46 pre_disable_mmu_workaround
47 msr sctlr_el2, x0
48 isb
49 1:
50
51 /* Check if the new image needs relocation. */
52 tbnz x16, IND_DONE_BIT, .Ldone
53
54 .Lloop:
55 and x12, x16, PAGE_MASK /* x12 = addr */
56
57 /* Test the entry flags. */
58 .Ltest_source:
59 tbz x16, IND_SOURCE_BIT, .Ltest_indirection
60
61 /* Invalidate dest page to PoC. */
62 mov x0, x13
63 add x20, x0, #PAGE_SIZE
64 sub x1, x15, #1
65 bic x0, x0, x1
66 2: dc ivac, x0
67 add x0, x0, x15
68 cmp x0, x20
69 b.lo 2b
70 dsb sy
71
72 mov x20, x13
73 mov x21, x12
74 copy_page x20, x21, x0, x1, x2, x3, x4, x5, x6, x7
75
76 /* dest += PAGE_SIZE */
77 add x13, x13, PAGE_SIZE
78 b .Lnext
79
80 .Ltest_indirection:
81 tbz x16, IND_INDIRECTION_BIT, .Ltest_destination
82
83 /* ptr = addr */
84 mov x14, x12
85 b .Lnext
86
87 .Ltest_destination:
88 tbz x16, IND_DESTINATION_BIT, .Lnext
89
90 /* dest = addr */
91 mov x13, x12
92
93 .Lnext:
94 /* entry = *ptr++ */
95 ldr x16, [x14], #8
96
97 /* while (!(entry & DONE)) */
98 tbz x16, IND_DONE_BIT, .Lloop
99
100 .Ldone:
101 /* wait for writes from copy_page to finish */
102 dsb nsh
103 ic iallu
104 dsb nsh
105 isb
106
107 /* Start new image. */
108 mov x0, x18
109 mov x1, xzr
110 mov x2, xzr
111 mov x3, xzr
112 br x17
113
114 ENDPROC(arm64_relocate_new_kernel)
115
116 .ltorg
117
118 .align 3 /* To keep the 64-bit values below naturally aligned. */
119
120 .Lcopy_end:
121 .org KEXEC_CONTROL_PAGE_SIZE
122
123 /*
124 * arm64_relocate_new_kernel_size - Number of bytes to copy to the
125 * control_code_page.
126 */
127 .globl arm64_relocate_new_kernel_size
128 arm64_relocate_new_kernel_size:
129 .quad .Lcopy_end - arm64_relocate_new_kernel