arch/blackfin/mach-bf527/boards/ezbrd.c

   1 /*
   2  * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
   3  * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2008 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/partitions.h>
  35 #include <linux/mtd/physmap.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38
  39 #include <linux/i2c.h>
  40 #include <linux/irq.h>
  41 #include <linux/interrupt.h>
  42 #include <linux/usb/musb.h>
  43 #include <asm/dma.h>
  44 #include <asm/bfin5xx_spi.h>
  45 #include <asm/reboot.h>
  46 #include <asm/nand.h>
  47 #include <asm/portmux.h>
  48 #include <asm/dpmc.h>
  49 #include <linux/spi/ad7877.h>
  50
  51 /*
  52  * Name the Board for the /proc/cpuinfo
  53  */
  54 const char bfin_board_name[] = "ADI BF526-EZBRD";
  55
  56 /*
  57  *  Driver needs to know address, irq and flag pin.
  58  */
  59
  60 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  61 static struct resource musb_resources[] = {
  62         [0] = {
  63                 .start  = 0xffc03800,
  64                 .end    = 0xffc03cff,
  65                 .flags  = IORESOURCE_MEM,
  66         },
  67         [1] = { /* general IRQ */
  68                 .start  = IRQ_USB_INT0,
  69                 .end    = IRQ_USB_INT0,
  70                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  71         },
  72         [2] = { /* DMA IRQ */
  73                 .start  = IRQ_USB_DMA,
  74                 .end    = IRQ_USB_DMA,
  75                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  76         },
  77 };
  78
  79 static struct musb_hdrc_config musb_config = {
  80         .multipoint     = 0,
  81         .dyn_fifo       = 0,
  82         .soft_con       = 1,
  83         .dma            = 1,
  84         .num_eps        = 8,
  85         .dma_channels   = 8,
  86         .gpio_vrsel     = GPIO_PG13,
  87 };
  88
  89 static struct musb_hdrc_platform_data musb_plat = {
  90 #if defined(CONFIG_USB_MUSB_OTG)
  91         .mode           = MUSB_OTG,
  92 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
  93         .mode           = MUSB_HOST,
  94 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
  95         .mode           = MUSB_PERIPHERAL,
  96 #endif
  97         .config         = &musb_config,
  98 };
  99
 100 static u64 musb_dmamask = ~(u32)0;
 101
 102 static struct platform_device musb_device = {
 103         .name           = "musb_hdrc",
 104         .id             = 0,
 105         .dev = {
 106                 .dma_mask               = &musb_dmamask,
 107                 .coherent_dma_mask      = 0xffffffff,
 108                 .platform_data          = &musb_plat,
 109         },
 110         .num_resources  = ARRAY_SIZE(musb_resources),
 111         .resource       = musb_resources,
 112 };
 113 #endif
 114
 115 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 116 static struct mtd_partition ezbrd_partitions[] = {
 117         {
 118                 .name       = "bootloader(nor)",
 119                 .size       = 0x40000,
 120                 .offset     = 0,
 121         }, {
 122                 .name       = "linux kernel(nor)",
 123                 .size       = 0x1C0000,
 124                 .offset     = MTDPART_OFS_APPEND,
 125         }, {
 126                 .name       = "file system(nor)",
 127                 .size       = MTDPART_SIZ_FULL,
 128                 .offset     = MTDPART_OFS_APPEND,
 129         }
 130 };
 131
 132 static struct physmap_flash_data ezbrd_flash_data = {
 133         .width      = 2,
 134         .parts      = ezbrd_partitions,
 135         .nr_parts   = ARRAY_SIZE(ezbrd_partitions),
 136 };
 137
 138 static struct resource ezbrd_flash_resource = {
 139         .start = 0x20000000,
 140         .end   = 0x203fffff,
 141         .flags = IORESOURCE_MEM,
 142 };
 143
 144 static struct platform_device ezbrd_flash_device = {
 145         .name          = "physmap-flash",
 146         .id            = 0,
 147         .dev = {
 148                 .platform_data = &ezbrd_flash_data,
 149         },
 150         .num_resources = 1,
 151         .resource      = &ezbrd_flash_resource,
 152 };
 153 #endif
 154
 155 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 156 static struct mtd_partition partition_info[] = {
 157         {
 158                 .name = "linux kernel(nand)",
 159                 .offset = 0,
 160                 .size = 4 * 1024 * 1024,
 161         },
 162         {
 163                 .name = "file system(nand)",
 164                 .offset = MTDPART_OFS_APPEND,
 165                 .size = MTDPART_SIZ_FULL,
 166         },
 167 };
 168
 169 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 170         .page_size = NFC_PG_SIZE_256,
 171         .data_width = NFC_NWIDTH_8,
 172         .partitions = partition_info,
 173         .nr_partitions = ARRAY_SIZE(partition_info),
 174         .rd_dly = 3,
 175         .wr_dly = 3,
 176 };
 177
 178 static struct resource bf5xx_nand_resources[] = {
 179         {
 180                 .start = NFC_CTL,
 181                 .end = NFC_DATA_RD + 2,
 182                 .flags = IORESOURCE_MEM,
 183         },
 184         {
 185                 .start = CH_NFC,
 186                 .end = CH_NFC,
 187                 .flags = IORESOURCE_IRQ,
 188         },
 189 };
 190
 191 static struct platform_device bf5xx_nand_device = {
 192         .name = "bf5xx-nand",
 193         .id = 0,
 194         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 195         .resource = bf5xx_nand_resources,
 196         .dev = {
 197                 .platform_data = &bf5xx_nand_platform,
 198         },
 199 };
 200 #endif
 201
 202 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 203 static struct platform_device rtc_device = {
 204         .name = "rtc-bfin",
 205         .id   = -1,
 206 };
 207 #endif
 208
 209
 210 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 211 static struct platform_device bfin_mii_bus = {
 212         .name = "bfin_mii_bus",
 213 };
 214
 215 static struct platform_device bfin_mac_device = {
 216         .name = "bfin_mac",
 217         .dev.platform_data = &bfin_mii_bus,
 218 };
 219 #endif
 220
 221 #if defined(CONFIG_MTD_M25P80) \
 222         || defined(CONFIG_MTD_M25P80_MODULE)
 223 static struct mtd_partition bfin_spi_flash_partitions[] = {
 224         {
 225                 .name = "bootloader(spi)",
 226                 .size = 0x00040000,
 227                 .offset = 0,
 228                 .mask_flags = MTD_CAP_ROM
 229         }, {
 230                 .name = "linux kernel(spi)",
 231                 .size = MTDPART_SIZ_FULL,
 232                 .offset = MTDPART_OFS_APPEND,
 233         }
 234 };
 235
 236 static struct flash_platform_data bfin_spi_flash_data = {
 237         .name = "m25p80",
 238         .parts = bfin_spi_flash_partitions,
 239         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 240         .type = "m25p16",
 241 };
 242
 243 /* SPI flash chip (m25p64) */
 244 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 245         .enable_dma = 0,         /* use dma transfer with this chip*/
 246         .bits_per_word = 8,
 247 };
 248 #endif
 249
 250 #if defined(CONFIG_SPI_ADC_BF533) \
 251         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 252 /* SPI ADC chip */
 253 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 254         .enable_dma = 1,         /* use dma transfer with this chip*/
 255         .bits_per_word = 16,
 256 };
 257 #endif
 258
 259 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 260 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 261         .enable_dma = 0,
 262         .bits_per_word = 8,
 263 };
 264 #endif
 265
 266 #if defined(CONFIG_PBX)
 267 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 268         .ctl_reg        = 0x4, /* send zero */
 269         .enable_dma     = 0,
 270         .bits_per_word  = 8,
 271         .cs_change_per_word = 1,
 272 };
 273 #endif
 274
 275 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 276 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 277         .enable_dma = 0,
 278         .bits_per_word = 16,
 279 };
 280
 281 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 282         .model                  = 7877,
 283         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 284         .x_plate_ohms           = 419,
 285         .y_plate_ohms           = 486,
 286         .pressure_max           = 1000,
 287         .pressure_min           = 0,
 288         .stopacq_polarity       = 1,
 289         .first_conversion_delay = 3,
 290         .acquisition_time       = 1,
 291         .averaging              = 1,
 292         .pen_down_acc_interval  = 1,
 293 };
 294 #endif
 295
 296 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 297 #include <linux/spi/ad7879.h>
 298 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 299         .model                  = 7879, /* Model = AD7879 */
 300         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 301         .pressure_max           = 10000,
 302         .pressure_min           = 0,
 303         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 304         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 305         .median                 = 2,    /* do 8 measurements */
 306         .averaging              = 1,    /* take the average of 4 middle samples */
 307         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 308         .gpio_output            = 1,    /* configure AUX/VBAT/GPIO as GPIO output */
 309         .gpio_default           = 1,    /* During initialization set GPIO = HIGH */
 310 };
 311 #endif
 312
 313 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 314 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 315         .enable_dma = 0,
 316         .bits_per_word = 16,
 317 };
 318 #endif
 319
 320 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 321          && defined(CONFIG_SND_SOC_WM8731_SPI)
 322 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
 323         .enable_dma = 0,
 324         .bits_per_word = 16,
 325 };
 326 #endif
 327
 328 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 329 static struct bfin5xx_spi_chip spidev_chip_info = {
 330         .enable_dma = 0,
 331         .bits_per_word = 8,
 332 };
 333 #endif
 334
 335 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 336 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 337         .enable_dma = 0,
 338         .bits_per_word = 8,
 339 };
 340 #endif
 341
 342 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 343 #if defined(CONFIG_MTD_M25P80) \
 344         || defined(CONFIG_MTD_M25P80_MODULE)
 345         {
 346                 /* the modalias must be the same as spi device driver name */
 347                 .modalias = "m25p80", /* Name of spi_driver for this device */
 348                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 349                 .bus_num = 0, /* Framework bus number */
 350                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 351                 .platform_data = &bfin_spi_flash_data,
 352                 .controller_data = &spi_flash_chip_info,
 353                 .mode = SPI_MODE_3,
 354         },
 355 #endif
 356
 357 #if defined(CONFIG_SPI_ADC_BF533) \
 358         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 359         {
 360                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 361                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 362                 .bus_num = 0, /* Framework bus number */
 363                 .chip_select = 1, /* Framework chip select. */
 364                 .platform_data = NULL, /* No spi_driver specific config */
 365                 .controller_data = &spi_adc_chip_info,
 366         },
 367 #endif
 368
 369 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 370         {
 371                 .modalias = "mmc_spi",
 372                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 373                 .bus_num = 0,
 374                 .chip_select = 5,
 375                 .controller_data = &mmc_spi_chip_info,
 376                 .mode = SPI_MODE_3,
 377         },
 378 #endif
 379 #if defined(CONFIG_PBX)
 380         {
 381                 .modalias = "fxs-spi",
 382                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 383                 .bus_num = 0,
 384                 .chip_select = 8 - CONFIG_J11_JUMPER,
 385                 .controller_data = &spi_si3xxx_chip_info,
 386                 .mode = SPI_MODE_3,
 387         },
 388         {
 389                 .modalias = "fxo-spi",
 390                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 391                 .bus_num = 0,
 392                 .chip_select = 8 - CONFIG_J19_JUMPER,
 393                 .controller_data = &spi_si3xxx_chip_info,
 394                 .mode = SPI_MODE_3,
 395         },
 396 #endif
 397 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 398         {
 399                 .modalias               = "ad7877",
 400                 .platform_data          = &bfin_ad7877_ts_info,
 401                 .irq                    = IRQ_PF8,
 402                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 403                 .bus_num        = 0,
 404                 .chip_select  = 2,
 405                 .controller_data = &spi_ad7877_chip_info,
 406         },
 407 #endif
 408 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 409         {
 410                 .modalias = "ad7879",
 411                 .platform_data = &bfin_ad7879_ts_info,
 412                 .irq = IRQ_PG0,
 413                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 414                 .bus_num = 0,
 415                 .chip_select = 5,
 416                 .controller_data = &spi_ad7879_chip_info,
 417                 .mode = SPI_CPHA | SPI_CPOL,
 418         },
 419 #endif
 420 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 421          && defined(CONFIG_SND_SOC_WM8731_SPI)
 422         {
 423                 .modalias       = "wm8731",
 424                 .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
 425                 .bus_num        = 0,
 426                 .chip_select    = 5,
 427                 .controller_data = &spi_wm8731_chip_info,
 428                 .mode = SPI_MODE_0,
 429         },
 430 #endif
 431 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 432         {
 433                 .modalias = "spidev",
 434                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 435                 .bus_num = 0,
 436                 .chip_select = 1,
 437                 .controller_data = &spidev_chip_info,
 438         },
 439 #endif
 440 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 441         {
 442                 .modalias = "bfin-lq035q1-spi",
 443                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 444                 .bus_num = 0,
 445                 .chip_select = 1,
 446                 .controller_data = &lq035q1_spi_chip_info,
 447                 .mode = SPI_CPHA | SPI_CPOL,
 448         },
 449 #endif
 450 };
 451
 452 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 453 /* SPI controller data */
 454 static struct bfin5xx_spi_master bfin_spi0_info = {
 455         .num_chipselect = 8,
 456         .enable_dma = 1,  /* master has the ability to do dma transfer */
 457         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 458 };
 459
 460 /* SPI (0) */
 461 static struct resource bfin_spi0_resource[] = {
 462         [0] = {
 463                 .start = SPI0_REGBASE,
 464                 .end   = SPI0_REGBASE + 0xFF,
 465                 .flags = IORESOURCE_MEM,
 466                 },
 467         [1] = {
 468                 .start = CH_SPI,
 469                 .end   = CH_SPI,
 470                 .flags = IORESOURCE_IRQ,
 471         },
 472 };
 473
 474 static struct platform_device bfin_spi0_device = {
 475         .name = "bfin-spi",
 476         .id = 0, /* Bus number */
 477         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 478         .resource = bfin_spi0_resource,
 479         .dev = {
 480                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 481         },
 482 };
 483 #endif  /* spi master and devices */
 484
 485 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 486 static struct resource bfin_uart_resources[] = {
 487 #ifdef CONFIG_SERIAL_BFIN_UART0
 488         {
 489                 .start = 0xFFC00400,
 490                 .end = 0xFFC004FF,
 491                 .flags = IORESOURCE_MEM,
 492         },
 493 #endif
 494 #ifdef CONFIG_SERIAL_BFIN_UART1
 495         {
 496                 .start = 0xFFC02000,
 497                 .end = 0xFFC020FF,
 498                 .flags = IORESOURCE_MEM,
 499         },
 500 #endif
 501 };
 502
 503 static struct platform_device bfin_uart_device = {
 504         .name = "bfin-uart",
 505         .id = 1,
 506         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 507         .resource = bfin_uart_resources,
 508 };
 509 #endif
 510
 511 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 512 #ifdef CONFIG_BFIN_SIR0
 513 static struct resource bfin_sir0_resources[] = {
 514         {
 515                 .start = 0xFFC00400,
 516                 .end = 0xFFC004FF,
 517                 .flags = IORESOURCE_MEM,
 518         },
 519         {
 520                 .start = IRQ_UART0_RX,
 521                 .end = IRQ_UART0_RX+1,
 522                 .flags = IORESOURCE_IRQ,
 523         },
 524         {
 525                 .start = CH_UART0_RX,
 526                 .end = CH_UART0_RX+1,
 527                 .flags = IORESOURCE_DMA,
 528         },
 529 };
 530
 531 static struct platform_device bfin_sir0_device = {
 532         .name = "bfin_sir",
 533         .id = 0,
 534         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 535         .resource = bfin_sir0_resources,
 536 };
 537 #endif
 538 #ifdef CONFIG_BFIN_SIR1
 539 static struct resource bfin_sir1_resources[] = {
 540         {
 541                 .start = 0xFFC02000,
 542                 .end = 0xFFC020FF,
 543                 .flags = IORESOURCE_MEM,
 544         },
 545         {
 546                 .start = IRQ_UART1_RX,
 547                 .end = IRQ_UART1_RX+1,
 548                 .flags = IORESOURCE_IRQ,
 549         },
 550         {
 551                 .start = CH_UART1_RX,
 552                 .end = CH_UART1_RX+1,
 553                 .flags = IORESOURCE_DMA,
 554         },
 555 };
 556
 557 static struct platform_device bfin_sir1_device = {
 558         .name = "bfin_sir",
 559         .id = 1,
 560         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 561         .resource = bfin_sir1_resources,
 562 };
 563 #endif
 564 #endif
 565
 566 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 567 static struct resource bfin_twi0_resource[] = {
 568         [0] = {
 569                 .start = TWI0_REGBASE,
 570                 .end   = TWI0_REGBASE,
 571                 .flags = IORESOURCE_MEM,
 572         },
 573         [1] = {
 574                 .start = IRQ_TWI,
 575                 .end   = IRQ_TWI,
 576                 .flags = IORESOURCE_IRQ,
 577         },
 578 };
 579
 580 static struct platform_device i2c_bfin_twi_device = {
 581         .name = "i2c-bfin-twi",
 582         .id = 0,
 583         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 584         .resource = bfin_twi0_resource,
 585 };
 586 #endif
 587
 588 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 589 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 590         {
 591                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 592         },
 593 #endif
 594 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 595         {
 596                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 597                 .irq = IRQ_PF8,
 598         },
 599 #endif
 600 };
 601
 602 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 603 static struct platform_device bfin_sport0_uart_device = {
 604         .name = "bfin-sport-uart",
 605         .id = 0,
 606 };
 607
 608 static struct platform_device bfin_sport1_uart_device = {
 609         .name = "bfin-sport-uart",
 610         .id = 1,
 611 };
 612 #endif
 613
 614 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 615 #include <linux/input.h>
 616 #include <linux/gpio_keys.h>
 617
 618 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 619         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
 620         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
 621 };
 622
 623 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 624         .buttons        = bfin_gpio_keys_table,
 625         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 626 };
 627
 628 static struct platform_device bfin_device_gpiokeys = {
 629         .name      = "gpio-keys",
 630         .dev = {
 631                 .platform_data = &bfin_gpio_keys_data,
 632         },
 633 };
 634 #endif
 635
 636 static struct resource bfin_gpios_resources = {
 637         .start = 0,
 638         .end   = MAX_BLACKFIN_GPIOS - 1,
 639         .flags = IORESOURCE_IRQ,
 640 };
 641
 642 static struct platform_device bfin_gpios_device = {
 643         .name = "simple-gpio",
 644         .id = -1,
 645         .num_resources = 1,
 646         .resource = &bfin_gpios_resources,
 647 };
 648
 649 static const unsigned int cclk_vlev_datasheet[] =
 650 {
 651         VRPAIR(VLEV_100, 400000000),
 652         VRPAIR(VLEV_105, 426000000),
 653         VRPAIR(VLEV_110, 500000000),
 654         VRPAIR(VLEV_115, 533000000),
 655         VRPAIR(VLEV_120, 600000000),
 656 };
 657
 658 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 659         .tuple_tab = cclk_vlev_datasheet,
 660         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 661         .vr_settling_time = 25 /* us */,
 662 };
 663
 664 static struct platform_device bfin_dpmc = {
 665         .name = "bfin dpmc",
 666         .dev = {
 667                 .platform_data = &bfin_dmpc_vreg_data,
 668         },
 669 };
 670
 671 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 672 #include <asm/bfin-lq035q1.h>
 673
 674 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 675         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 676         .use_bl =       1,
 677         .gpio_bl =      GPIO_PG12,
 678 };
 679
 680 static struct resource bfin_lq035q1_resources[] = {
 681         {
 682                 .start = IRQ_PPI_ERROR,
 683                 .end = IRQ_PPI_ERROR,
 684                 .flags = IORESOURCE_IRQ,
 685         },
 686 };
 687
 688 static struct platform_device bfin_lq035q1_device = {
 689         .name           = "bfin-lq035q1",
 690         .id             = -1,
 691         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 692         .resource       = bfin_lq035q1_resources,
 693         .dev            = {
 694                 .platform_data = &bfin_lq035q1_data,
 695         },
 696 };
 697 #endif
 698
 699 static struct platform_device *stamp_devices[] __initdata = {
 700
 701         &bfin_dpmc,
 702
 703 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 704         &bf5xx_nand_device,
 705 #endif
 706
 707 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 708         &rtc_device,
 709 #endif
 710
 711 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 712         &musb_device,
 713 #endif
 714
 715 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 716         &bfin_mii_bus,
 717         &bfin_mac_device,
 718 #endif
 719
 720 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 721         &bfin_spi0_device,
 722 #endif
 723
 724 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 725         &bfin_uart_device,
 726 #endif
 727
 728 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 729         &bfin_lq035q1_device,
 730 #endif
 731
 732 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 733 #ifdef CONFIG_BFIN_SIR0
 734         &bfin_sir0_device,
 735 #endif
 736 #ifdef CONFIG_BFIN_SIR1
 737         &bfin_sir1_device,
 738 #endif
 739 #endif
 740
 741 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 742         &i2c_bfin_twi_device,
 743 #endif
 744
 745 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 746         &bfin_sport0_uart_device,
 747         &bfin_sport1_uart_device,
 748 #endif
 749
 750 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 751         &bfin_device_gpiokeys,
 752 #endif
 753
 754 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 755         &ezbrd_flash_device,
 756 #endif
 757
 758         &bfin_gpios_device,
 759 };
 760
 761 static int __init ezbrd_init(void)
 762 {
 763         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 764         i2c_register_board_info(0, bfin_i2c_board_info,
 765                                 ARRAY_SIZE(bfin_i2c_board_info));
 766         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 767         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 768         return 0;
 769 }
 770
 771 arch_initcall(ezbrd_init);
 772
 773 void native_machine_restart(char *cmd)
 774 {
 775         /* workaround reboot hang when booting from SPI */
 776         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 777                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 778 }
 779
 780 void bfin_get_ether_addr(char *addr)
 781 {
 782         /* the MAC is stored in OTP memory page 0xDF */
 783         u32 ret;
 784         u64 otp_mac;
 785         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
 786
 787         ret = otp_read(0xDF, 0x00, &otp_mac);
 788         if (!(ret & 0x1)) {
 789                 char *otp_mac_p = (char *)&otp_mac;
 790                 for (ret = 0; ret < 6; ++ret)
 791                         addr[ret] = otp_mac_p[5 - ret];
 792         }
 793 }
 794 EXPORT_SYMBOL(bfin_get_ether_addr);