2 # For a description of the syntax of this configuration file,
3 # see Documentation/kbuild/kconfig-language.txt.
6 mainmenu "Linux Kernel Configuration"
12 This is Linux's home port. Linux was originally native to the Intel
13 386, and runs on all the later x86 processors including the Intel
14 486, 586, Pentiums, and various instruction-set-compatible chips by
15 AMD, Cyrix, and others.
21 config LOCKDEP_SUPPORT
25 config STACKTRACE_SUPPORT
29 config SEMAPHORE_SLEEPERS
44 config GENERIC_ISA_DMA
52 config GENERIC_HWEIGHT
56 config ARCH_MAY_HAVE_PC_FDC
66 menu "Processor type and features"
69 bool "Symmetric multi-processing support"
71 This enables support for systems with more than one CPU. If you have
72 a system with only one CPU, like most personal computers, say N. If
73 you have a system with more than one CPU, say Y.
75 If you say N here, the kernel will run on single and multiprocessor
76 machines, but will use only one CPU of a multiprocessor machine. If
77 you say Y here, the kernel will run on many, but not all,
78 singleprocessor machines. On a singleprocessor machine, the kernel
79 will run faster if you say N here.
81 Note that if you say Y here and choose architecture "586" or
82 "Pentium" under "Processor family", the kernel will not work on 486
83 architectures. Similarly, multiprocessor kernels for the "PPro"
84 architecture may not work on all Pentium based boards.
86 People using multiprocessor machines who say Y here should also say
87 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
88 Management" code will be disabled if you say Y here.
90 See also the <file:Documentation/smp.txt>,
91 <file:Documentation/i386/IO-APIC.txt>,
92 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
93 <http://www.tldp.org/docs.html#howto>.
95 If you don't know what to do here, say N.
98 prompt "Subarchitecture Type"
104 Choose this option if your computer is a standard PC or compatible.
109 Select this for an AMD Elan processor.
111 Do not use this option for K6/Athlon/Opteron processors!
113 If unsure, choose "PC-compatible" instead.
118 Voyager is an MCA-based 32-way capable SMP architecture proprietary
119 to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
123 If you do not specifically know you have a Voyager based machine,
124 say N here, otherwise the kernel you build will not be bootable.
127 bool "NUMAQ (IBM/Sequent)"
131 This option is used for getting Linux to run on a (IBM/Sequent) NUMA
132 multiquad box. This changes the way that processors are bootstrapped,
133 and uses Clustered Logical APIC addressing mode instead of Flat Logical.
134 You will need a new lynxer.elf file to flash your firmware with - send
135 email to <Martin.Bligh@us.ibm.com>.
138 bool "Summit/EXA (IBM x440)"
141 This option is needed for IBM systems that use the Summit/EXA chipset.
142 In particular, it is needed for the x440.
144 If you don't have one of these computers, you should say N here.
145 If you want to build a NUMA kernel, you must select ACPI.
148 bool "Support for other sub-arch SMP systems with more than 8 CPUs"
151 This option is needed for the systems that have more than 8 CPUs
152 and if the system is not of any sub-arch type above.
154 If you don't have such a system, you should say N here.
157 bool "SGI 320/540 (Visual Workstation)"
159 The SGI Visual Workstation series is an IA32-based workstation
160 based on SGI systems chips with some legacy PC hardware attached.
162 Say Y here to create a kernel to run on the SGI 320 or 540.
164 A kernel compiled for the Visual Workstation will not run on PCs
165 and vice versa. See <file:Documentation/sgi-visws.txt> for details.
167 config X86_GENERICARCH
168 bool "Generic architecture (Summit, bigsmp, ES7000, default)"
170 This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
171 It is intended for a generic binary kernel.
172 If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
175 bool "Support for Unisys ES7000 IA32 series"
178 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
179 supposed to run on an IA32-based Unisys ES7000 system.
180 Only choose this option if you have such a system, otherwise you
188 depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
191 config HAVE_ARCH_PARSE_SRAT
196 config X86_SUMMIT_NUMA
199 depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
201 config X86_CYCLONE_TIMER
204 depends on X86_SUMMIT || X86_GENERICARCH
206 config ES7000_CLUSTERED_APIC
209 depends on SMP && X86_ES7000 && MPENTIUMIII
211 source "arch/i386/Kconfig.cpu"
214 bool "HPET Timer Support"
216 This enables the use of the HPET for the kernel's internal timer.
217 HPET is the next generation timer replacing legacy 8254s.
218 You can safely choose Y here. However, HPET will only be
219 activated if the platform and the BIOS support this feature.
220 Otherwise the 8254 will be used for timing services.
222 Choose N to continue using the legacy 8254 timer.
224 config HPET_EMULATE_RTC
226 depends on HPET_TIMER && RTC=y
230 int "Maximum number of CPUs (2-255)"
233 default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
236 This allows you to specify the maximum number of CPUs which this
237 kernel will support. The maximum supported value is 255 and the
238 minimum value which makes sense is 2.
240 This is purely to save memory - each supported CPU adds
241 approximately eight kilobytes to the kernel image.
244 bool "SMT (Hyperthreading) scheduler support"
247 SMT scheduler support improves the CPU scheduler's decision making
248 when dealing with Intel Pentium 4 chips with HyperThreading at a
249 cost of slightly increased overhead in some places. If unsure say
253 bool "Multi-core scheduler support"
257 Multi-core scheduler support improves the CPU scheduler's decision
258 making when dealing with multi-core CPU chips at a cost of slightly
259 increased overhead in some places. If unsure say N here.
261 source "kernel/Kconfig.preempt"
264 bool "Local APIC support on uniprocessors"
265 depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
267 A local APIC (Advanced Programmable Interrupt Controller) is an
268 integrated interrupt controller in the CPU. If you have a single-CPU
269 system which has a processor with a local APIC, you can say Y here to
270 enable and use it. If you say Y here even though your machine doesn't
271 have a local APIC, then the kernel will still run with no slowdown at
272 all. The local APIC supports CPU-generated self-interrupts (timer,
273 performance counters), and the NMI watchdog which detects hard
277 bool "IO-APIC support on uniprocessors"
278 depends on X86_UP_APIC
280 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
281 SMP-capable replacement for PC-style interrupt controllers. Most
282 SMP systems and many recent uniprocessor systems have one.
284 If you have a single-CPU system with an IO-APIC, you can say Y here
285 to use it. If you say Y here even though your machine doesn't have
286 an IO-APIC, then the kernel will still run with no slowdown at all.
288 config X86_LOCAL_APIC
290 depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
295 depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
298 config X86_VISWS_APIC
304 bool "Machine Check Exception"
305 depends on !X86_VOYAGER
307 Machine Check Exception support allows the processor to notify the
308 kernel if it detects a problem (e.g. overheating, component failure).
309 The action the kernel takes depends on the severity of the problem,
310 ranging from a warning message on the console, to halting the machine.
311 Your processor must be a Pentium or newer to support this - check the
312 flags in /proc/cpuinfo for mce. Note that some older Pentium systems
313 have a design flaw which leads to false MCE events - hence MCE is
314 disabled on all P5 processors, unless explicitly enabled with "mce"
315 as a boot argument. Similarly, if MCE is built in and creates a
316 problem on some new non-standard machine, you can boot with "nomce"
317 to disable it. MCE support simply ignores non-MCE processors like
318 the 386 and 486, so nearly everyone can say Y here.
320 config X86_MCE_NONFATAL
321 tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
324 Enabling this feature starts a timer that triggers every 5 seconds which
325 will look at the machine check registers to see if anything happened.
326 Non-fatal problems automatically get corrected (but still logged).
327 Disable this if you don't want to see these messages.
328 Seeing the messages this option prints out may be indicative of dying hardware,
329 or out-of-spec (ie, overclocked) hardware.
330 This option only does something on certain CPUs.
331 (AMD Athlon/Duron and Intel Pentium 4)
333 config X86_MCE_P4THERMAL
334 bool "check for P4 thermal throttling interrupt."
335 depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
337 Enabling this feature will cause a message to be printed when the P4
338 enters thermal throttling.
342 bool "Enable VM86 support" if EMBEDDED
344 This option is required by programs like DOSEMU to run 16-bit legacy
345 code on X86 processors. It also may be needed by software like
346 XFree86 to initialize some video cards via BIOS. Disabling this
347 option saves about 6k.
350 tristate "Toshiba Laptop support"
352 This adds a driver to safely access the System Management Mode of
353 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
354 not work on models with a Phoenix BIOS. The System Management Mode
355 is used to set the BIOS and power saving options on Toshiba portables.
357 For information on utilities to make use of this driver see the
358 Toshiba Linux utilities web site at:
359 <http://www.buzzard.org.uk/toshiba/>.
361 Say Y if you intend to run this kernel on a Toshiba portable.
365 tristate "Dell laptop support"
367 This adds a driver to safely access the System Management Mode
368 of the CPU on the Dell Inspiron 8000. The System Management Mode
369 is used to read cpu temperature and cooling fan status and to
370 control the fans on the I8K portables.
372 This driver has been tested only on the Inspiron 8000 but it may
373 also work with other Dell laptops. You can force loading on other
374 models by passing the parameter `force=1' to the module. Use at
377 For information on utilities to make use of this driver see the
378 I8K Linux utilities web site at:
379 <http://people.debian.org/~dz/i8k/>
381 Say Y if you intend to run this kernel on a Dell Inspiron 8000.
384 config X86_REBOOTFIXUPS
385 bool "Enable X86 board specific fixups for reboot"
389 This enables chipset and/or board specific fixups to be done
390 in order to get reboot to work correctly. This is only needed on
391 some combinations of hardware and BIOS. The symptom, for which
392 this config is intended, is when reboot ends with a stalled/hung
395 Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
398 Say Y if you want to enable the fixup. Currently, it's safe to
399 enable this option even if you don't need it.
403 tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
406 If you say Y here and also to "/dev file system support" in the
407 'File systems' section, you will be able to update the microcode on
408 Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
409 Pentium III, Pentium 4, Xeon etc. You will obviously need the
410 actual microcode binary data itself which is not shipped with the
413 For latest news and information on obtaining all the required
414 ingredients for this driver, check:
415 <http://www.urbanmyth.org/microcode/>.
417 To compile this driver as a module, choose M here: the
418 module will be called microcode.
420 config MICROCODE_OLD_INTERFACE
426 tristate "/dev/cpu/*/msr - Model-specific register support"
428 This device gives privileged processes access to the x86
429 Model-Specific Registers (MSRs). It is a character device with
430 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
431 MSR accesses are directed to a specific CPU on multi-processor
435 tristate "/dev/cpu/*/cpuid - CPU information support"
437 This device gives processes access to the x86 CPUID instruction to
438 be executed on a specific processor. It is a character device
439 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
442 source "drivers/firmware/Kconfig"
445 prompt "High Memory Support"
450 depends on !X86_NUMAQ
452 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
453 However, the address space of 32-bit x86 processors is only 4
454 Gigabytes large. That means that, if you have a large amount of
455 physical memory, not all of it can be "permanently mapped" by the
456 kernel. The physical memory that's not permanently mapped is called
459 If you are compiling a kernel which will never run on a machine with
460 more than 1 Gigabyte total physical RAM, answer "off" here (default
461 choice and suitable for most users). This will result in a "3GB/1GB"
462 split: 3GB are mapped so that each process sees a 3GB virtual memory
463 space and the remaining part of the 4GB virtual memory space is used
464 by the kernel to permanently map as much physical memory as
467 If the machine has between 1 and 4 Gigabytes physical RAM, then
470 If more than 4 Gigabytes is used then answer "64GB" here. This
471 selection turns Intel PAE (Physical Address Extension) mode on.
472 PAE implements 3-level paging on IA32 processors. PAE is fully
473 supported by Linux, PAE mode is implemented on all recent Intel
474 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
475 then the kernel will not boot on CPUs that don't support PAE!
477 The actual amount of total physical memory will either be
478 auto detected or can be forced by using a kernel command line option
479 such as "mem=256M". (Try "man bootparam" or see the documentation of
480 your boot loader (lilo or loadlin) about how to pass options to the
481 kernel at boot time.)
483 If unsure, say "off".
487 depends on !X86_NUMAQ
489 Select this if you have a 32-bit processor and between 1 and 4
490 gigabytes of physical RAM.
494 depends on X86_CMPXCHG64
496 Select this if you have a 32-bit processor and more than 4
497 gigabytes of physical RAM.
502 depends on EXPERIMENTAL
503 prompt "Memory split" if EMBEDDED
506 Select the desired split between kernel and user memory.
508 If the address range available to the kernel is less than the
509 physical memory installed, the remaining memory will be available
510 as "high memory". Accessing high memory is a little more costly
511 than low memory, as it needs to be mapped into the kernel first.
512 Note that increasing the kernel address space limits the range
513 available to user programs, making the address space there
514 tighter. Selecting anything other than the default 3G/1G split
515 will also likely make your kernel incompatible with binary-only
518 If you are not absolutely sure what you are doing, leave this
522 bool "3G/1G user/kernel split"
523 config VMSPLIT_3G_OPT
525 bool "3G/1G user/kernel split (for full 1G low memory)"
527 bool "2G/2G user/kernel split"
529 bool "1G/3G user/kernel split"
534 default 0xB0000000 if VMSPLIT_3G_OPT
535 default 0x78000000 if VMSPLIT_2G
536 default 0x40000000 if VMSPLIT_1G
541 depends on HIGHMEM64G || HIGHMEM4G
546 depends on HIGHMEM64G
548 select RESOURCES_64BIT
550 # Common NUMA Features
552 bool "Numa Memory Allocation and Scheduler Support"
553 depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI)
555 default y if (X86_NUMAQ || X86_SUMMIT)
557 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
558 depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
562 default "4" if X86_NUMAQ
564 depends on NEED_MULTIPLE_NODES
566 config HAVE_ARCH_BOOTMEM_NODE
571 config ARCH_HAVE_MEMORY_PRESENT
573 depends on DISCONTIGMEM
576 config NEED_NODE_MEMMAP_SIZE
578 depends on DISCONTIGMEM || SPARSEMEM
581 config HAVE_ARCH_ALLOC_REMAP
586 config ARCH_FLATMEM_ENABLE
588 depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
590 config ARCH_DISCONTIGMEM_ENABLE
594 config ARCH_DISCONTIGMEM_DEFAULT
598 config ARCH_SPARSEMEM_ENABLE
600 depends on (NUMA || (X86_PC && EXPERIMENTAL))
601 select SPARSEMEM_STATIC
603 config ARCH_SELECT_MEMORY_MODEL
605 depends on ARCH_SPARSEMEM_ENABLE
607 config ARCH_POPULATES_NODE_MAP
613 bool "Allocate 3rd-level pagetables from highmem"
614 depends on HIGHMEM4G || HIGHMEM64G
616 The VM uses one page table entry for each page of physical memory.
617 For systems with a lot of RAM, this can be wasteful of precious
618 low memory. Setting this option will put user-space page table
619 entries in high memory.
621 config MATH_EMULATION
622 bool "Math emulation"
624 Linux can emulate a math coprocessor (used for floating point
625 operations) if you don't have one. 486DX and Pentium processors have
626 a math coprocessor built in, 486SX and 386 do not, unless you added
627 a 487DX or 387, respectively. (The messages during boot time can
628 give you some hints here ["man dmesg"].) Everyone needs either a
629 coprocessor or this emulation.
631 If you don't have a math coprocessor, you need to say Y here; if you
632 say Y here even though you have a coprocessor, the coprocessor will
633 be used nevertheless. (This behavior can be changed with the kernel
634 command line option "no387", which comes handy if your coprocessor
635 is broken. Try "man bootparam" or see the documentation of your boot
636 loader (lilo or loadlin) about how to pass options to the kernel at
637 boot time.) This means that it is a good idea to say Y here if you
638 intend to use this kernel on different machines.
640 More information about the internals of the Linux math coprocessor
641 emulation can be found in <file:arch/i386/math-emu/README>.
643 If you are not sure, say Y; apart from resulting in a 66 KB bigger
644 kernel, it won't hurt.
647 bool "MTRR (Memory Type Range Register) support"
649 On Intel P6 family processors (Pentium Pro, Pentium II and later)
650 the Memory Type Range Registers (MTRRs) may be used to control
651 processor access to memory ranges. This is most useful if you have
652 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
653 allows bus write transfers to be combined into a larger transfer
654 before bursting over the PCI/AGP bus. This can increase performance
655 of image write operations 2.5 times or more. Saying Y here creates a
656 /proc/mtrr file which may be used to manipulate your processor's
657 MTRRs. Typically the X server should use this.
659 This code has a reasonably generic interface so that similar
660 control registers on other processors can be easily supported
663 The Cyrix 6x86, 6x86MX and M II processors have Address Range
664 Registers (ARRs) which provide a similar functionality to MTRRs. For
665 these, the ARRs are used to emulate the MTRRs.
666 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
667 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
668 write-combining. All of these processors are supported by this code
669 and it makes sense to say Y here if you have one of them.
671 Saying Y here also fixes a problem with buggy SMP BIOSes which only
672 set the MTRRs for the boot CPU and not for the secondary CPUs. This
673 can lead to all sorts of problems, so it's good to say Y here.
675 You can safely say Y even if your machine doesn't have MTRRs, you'll
676 just add about 9 KB to your kernel.
678 See <file:Documentation/mtrr.txt> for more information.
681 bool "Boot from EFI support"
685 This enables the kernel to boot on EFI platforms using
686 system configuration information passed to it from the firmware.
687 This also enables the kernel to use any EFI runtime services that are
688 available (such as the EFI variable services).
690 This option is only useful on systems that have EFI firmware
691 and will result in a kernel image that is ~8k larger. In addition,
692 you must use the latest ELILO loader available at
693 <http://elilo.sourceforge.net> in order to take advantage of
694 kernel initialization using EFI information (neither GRUB nor LILO know
695 anything about EFI). However, even with this option, the resultant
696 kernel should continue to boot on existing non-EFI platforms.
699 bool "Enable kernel irq balancing"
700 depends on SMP && X86_IO_APIC
703 The default yes will allow the kernel to do irq load balancing.
704 Saying no will keep the kernel from doing irq load balancing.
706 # turning this on wastes a bunch of space.
707 # Summit needs it only when NUMA is on
710 depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
714 bool "Use register arguments"
717 Compile the kernel with -mregparm=3. This instructs gcc to use
718 a more efficient function call ABI which passes the first three
719 arguments of a function call via registers, which results in denser
722 If this option is disabled, then the default ABI of passing
723 arguments via the stack is used.
728 bool "Enable seccomp to safely compute untrusted bytecode"
732 This kernel feature is useful for number crunching applications
733 that may need to compute untrusted bytecode during their
734 execution. By using pipes or other transports made available to
735 the process as file descriptors supporting the read/write
736 syscalls, it's possible to isolate those applications in
737 their own address space using seccomp. Once seccomp is
738 enabled via /proc/<pid>/seccomp, it cannot be disabled
739 and the task is only allowed to execute a few safe syscalls
740 defined by each seccomp mode.
742 If unsure, say Y. Only embedded should say N here.
744 source kernel/Kconfig.hz
747 bool "kexec system call"
749 kexec is a system call that implements the ability to shutdown your
750 current kernel, and to start another kernel. It is like a reboot
751 but it is independent of the system firmware. And like a reboot
752 you can start any kernel with it, not just Linux.
754 The name comes from the similarity to the exec system call.
756 It is an ongoing process to be certain the hardware in a machine
757 is properly shutdown, so do not be surprised if this code does not
758 initially work for you. It may help to enable device hotplugging
759 support. As of this writing the exact hardware interface is
760 strongly in flux, so no good recommendation can be made.
763 bool "kernel crash dumps (EXPERIMENTAL)"
764 depends on EXPERIMENTAL
767 Generate crash dump after being started by kexec.
768 This should be normally only set in special crash dump kernels
769 which are loaded in the main kernel with kexec-tools into
770 a specially reserved region and then later executed after
771 a crash by kdump/kexec. The crash dump kernel must be compiled
772 to a memory address not used by the main kernel or BIOS using
774 For more details see Documentation/kdump/kdump.txt
777 bool "Build a relocatable kernel"
779 This build a kernel image that retains relocation information
780 so it can be loaded someplace besides the default 1MB.
781 The relocations tend to the kernel binary about 10% larger,
782 but are discarded at runtime.
784 One use is for the kexec on panic case where the recovery kernel
785 must live at a different physical address than the primary
788 config PHYSICAL_ALIGN
789 hex "Alignment value to which kernel should be aligned"
791 range 0x2000 0x400000
793 This value puts the alignment restrictions on physical address
794 where kernel is loaded and run from. Kernel is compiled for an
795 address which meets above alignment restriction.
797 If bootloader loads the kernel at a non-aligned address and
798 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
799 address aligned to above value and run from there.
801 If bootloader loads the kernel at a non-aligned address and
802 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
803 load address and decompress itself to the address it has been
804 compiled for and run from there. The address for which kernel is
805 compiled already meets above alignment restrictions. Hence the
806 end result is that kernel runs from a physical address meeting
807 above alignment restrictions.
809 Don't change this unless you know what you are doing.
812 bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
813 depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
815 Say Y here to experiment with turning CPUs off and on, and to
816 enable suspend on SMP systems. CPUs can be controlled through
817 /sys/devices/system/cpu.
820 bool "Compat VDSO support"
824 Map the VDSO to the predictable old-style address too.
826 Say N here if you are running a sufficiently recent glibc
827 version (2.3.3 or later), to remove the high-mapped
828 VDSO mapping and to exclusively use the randomized VDSO.
834 config ARCH_ENABLE_MEMORY_HOTPLUG
838 menu "Power management options (ACPI, APM)"
839 depends on !X86_VOYAGER
841 source kernel/power/Kconfig
843 source "drivers/acpi/Kconfig"
845 menu "APM (Advanced Power Management) BIOS Support"
846 depends on PM && !X86_VISWS
849 tristate "APM (Advanced Power Management) BIOS support"
852 APM is a BIOS specification for saving power using several different
853 techniques. This is mostly useful for battery powered laptops with
854 APM compliant BIOSes. If you say Y here, the system time will be
855 reset after a RESUME operation, the /proc/apm device will provide
856 battery status information, and user-space programs will receive
857 notification of APM "events" (e.g. battery status change).
859 If you select "Y" here, you can disable actual use of the APM
860 BIOS by passing the "apm=off" option to the kernel at boot time.
862 Note that the APM support is almost completely disabled for
863 machines with more than one CPU.
865 In order to use APM, you will need supporting software. For location
866 and more information, read <file:Documentation/pm.txt> and the
867 Battery Powered Linux mini-HOWTO, available from
868 <http://www.tldp.org/docs.html#howto>.
870 This driver does not spin down disk drives (see the hdparm(8)
871 manpage ("man 8 hdparm") for that), and it doesn't turn off
872 VESA-compliant "green" monitors.
874 This driver does not support the TI 4000M TravelMate and the ACER
875 486/DX4/75 because they don't have compliant BIOSes. Many "green"
876 desktop machines also don't have compliant BIOSes, and this driver
877 may cause those machines to panic during the boot phase.
879 Generally, if you don't have a battery in your machine, there isn't
880 much point in using this driver and you should say N. If you get
881 random kernel OOPSes or reboots that don't seem to be related to
882 anything, try disabling/enabling this option (or disabling/enabling
885 Some other things you should try when experiencing seemingly random,
888 1) make sure that you have enough swap space and that it is
890 2) pass the "no-hlt" option to the kernel
891 3) switch on floating point emulation in the kernel and pass
892 the "no387" option to the kernel
893 4) pass the "floppy=nodma" option to the kernel
894 5) pass the "mem=4M" option to the kernel (thereby disabling
895 all but the first 4 MB of RAM)
896 6) make sure that the CPU is not over clocked.
897 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
898 8) disable the cache from your BIOS settings
899 9) install a fan for the video card or exchange video RAM
900 10) install a better fan for the CPU
901 11) exchange RAM chips
902 12) exchange the motherboard.
904 To compile this driver as a module, choose M here: the
905 module will be called apm.
907 config APM_IGNORE_USER_SUSPEND
908 bool "Ignore USER SUSPEND"
911 This option will ignore USER SUSPEND requests. On machines with a
912 compliant APM BIOS, you want to say N. However, on the NEC Versa M
913 series notebooks, it is necessary to say Y because of a BIOS bug.
916 bool "Enable PM at boot time"
919 Enable APM features at boot time. From page 36 of the APM BIOS
920 specification: "When disabled, the APM BIOS does not automatically
921 power manage devices, enter the Standby State, enter the Suspend
922 State, or take power saving steps in response to CPU Idle calls."
923 This driver will make CPU Idle calls when Linux is idle (unless this
924 feature is turned off -- see "Do CPU IDLE calls", below). This
925 should always save battery power, but more complicated APM features
926 will be dependent on your BIOS implementation. You may need to turn
927 this option off if your computer hangs at boot time when using APM
928 support, or if it beeps continuously instead of suspending. Turn
929 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
930 T400CDT. This is off by default since most machines do fine without
934 bool "Make CPU Idle calls when idle"
937 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
938 On some machines, this can activate improved power savings, such as
939 a slowed CPU clock rate, when the machine is idle. These idle calls
940 are made after the idle loop has run for some length of time (e.g.,
941 333 mS). On some machines, this will cause a hang at boot time or
942 whenever the CPU becomes idle. (On machines with more than one CPU,
943 this option does nothing.)
945 config APM_DISPLAY_BLANK
946 bool "Enable console blanking using APM"
949 Enable console blanking using the APM. Some laptops can use this to
950 turn off the LCD backlight when the screen blanker of the Linux
951 virtual console blanks the screen. Note that this is only used by
952 the virtual console screen blanker, and won't turn off the backlight
953 when using the X Window system. This also doesn't have anything to
954 do with your VESA-compliant power-saving monitor. Further, this
955 option doesn't work for all laptops -- it might not turn off your
956 backlight at all, or it might print a lot of errors to the console,
957 especially if you are using gpm.
959 config APM_RTC_IS_GMT
960 bool "RTC stores time in GMT"
963 Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
964 stores the time in GMT (Greenwich Mean Time). Say N if your RTC
967 It is in fact recommended to store GMT in your RTC, because then you
968 don't have to worry about daylight savings time changes. The only
969 reason not to use GMT in your RTC is if you also run a broken OS
970 that doesn't understand GMT.
972 config APM_ALLOW_INTS
973 bool "Allow interrupts during APM BIOS calls"
976 Normally we disable external interrupts while we are making calls to
977 the APM BIOS as a measure to lessen the effects of a badly behaving
978 BIOS implementation. The BIOS should reenable interrupts if it
979 needs to. Unfortunately, some BIOSes do not -- especially those in
980 many of the newer IBM Thinkpads. If you experience hangs when you
981 suspend, try setting this to Y. Otherwise, say N.
983 config APM_REAL_MODE_POWER_OFF
984 bool "Use real mode APM BIOS call to power off"
987 Use real mode APM BIOS calls to switch off the computer. This is
988 a work-around for a number of buggy BIOSes. Switch this option on if
989 your computer crashes instead of powering off properly.
993 source "arch/i386/kernel/cpu/cpufreq/Kconfig"
997 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
1000 bool "PCI support" if !X86_VISWS
1001 depends on !X86_VOYAGER
1002 default y if X86_VISWS
1004 Find out whether you have a PCI motherboard. PCI is the name of a
1005 bus system, i.e. the way the CPU talks to the other stuff inside
1006 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1007 VESA. If you have PCI, say Y, otherwise N.
1009 The PCI-HOWTO, available from
1010 <http://www.tldp.org/docs.html#howto>, contains valuable
1011 information about which PCI hardware does work under Linux and which
1015 prompt "PCI access mode"
1016 depends on PCI && !X86_VISWS
1019 On PCI systems, the BIOS can be used to detect the PCI devices and
1020 determine their configuration. However, some old PCI motherboards
1021 have BIOS bugs and may crash if this is done. Also, some embedded
1022 PCI-based systems don't have any BIOS at all. Linux can also try to
1023 detect the PCI hardware directly without using the BIOS.
1025 With this option, you can specify how Linux should detect the
1026 PCI devices. If you choose "BIOS", the BIOS will be used,
1027 if you choose "Direct", the BIOS won't be used, and if you
1028 choose "MMConfig", then PCI Express MMCONFIG will be used.
1029 If you choose "Any", the kernel will try MMCONFIG, then the
1030 direct access method and falls back to the BIOS if that doesn't
1031 work. If unsure, go with the default, which is "Any".
1036 config PCI_GOMMCONFIG
1049 depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
1054 depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
1059 depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
1062 source "drivers/pci/pcie/Kconfig"
1064 source "drivers/pci/Kconfig"
1072 depends on !(X86_VOYAGER || X86_VISWS)
1074 Find out whether you have ISA slots on your motherboard. ISA is the
1075 name of a bus system, i.e. the way the CPU talks to the other stuff
1076 inside your box. Other bus systems are PCI, EISA, MicroChannel
1077 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1078 newer boards don't support it. If you have ISA, say Y, otherwise N.
1084 The Extended Industry Standard Architecture (EISA) bus was
1085 developed as an open alternative to the IBM MicroChannel bus.
1087 The EISA bus provided some of the features of the IBM MicroChannel
1088 bus while maintaining backward compatibility with cards made for
1089 the older ISA bus. The EISA bus saw limited use between 1988 and
1090 1995 when it was made obsolete by the PCI bus.
1092 Say Y here if you are building a kernel for an EISA-based machine.
1096 source "drivers/eisa/Kconfig"
1099 bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
1100 default y if X86_VOYAGER
1102 MicroChannel Architecture is found in some IBM PS/2 machines and
1103 laptops. It is a bus system similar to PCI or ISA. See
1104 <file:Documentation/mca.txt> (and especially the web page given
1105 there) before attempting to build an MCA bus kernel.
1107 source "drivers/mca/Kconfig"
1110 tristate "NatSemi SCx200 support"
1111 depends on !X86_VOYAGER
1113 This provides basic support for National Semiconductor's
1114 (now AMD's) Geode processors. The driver probes for the
1115 PCI-IDs of several on-chip devices, so its a good dependency
1116 for other scx200_* drivers.
1118 If compiled as a module, the driver is named scx200.
1120 config SCx200HR_TIMER
1121 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
1122 depends on SCx200 && GENERIC_TIME
1125 This driver provides a clocksource built upon the on-chip
1126 27MHz high-resolution timer. Its also a workaround for
1127 NSC Geode SC-1100's buggy TSC, which loses time when the
1128 processor goes idle (as is done by the scheduler). The
1129 other workaround is idle=poll boot option.
1133 depends on AGP_AMD64
1135 source "drivers/pcmcia/Kconfig"
1137 source "drivers/pci/hotplug/Kconfig"
1141 menu "Executable file formats"
1143 source "fs/Kconfig.binfmt"
1147 source "net/Kconfig"
1149 source "drivers/Kconfig"
1153 menu "Instrumentation Support"
1154 depends on EXPERIMENTAL
1156 source "arch/i386/oprofile/Kconfig"
1159 bool "Kprobes (EXPERIMENTAL)"
1160 depends on KALLSYMS && EXPERIMENTAL && MODULES
1162 Kprobes allows you to trap at almost any kernel address and
1163 execute a callback function. register_kprobe() establishes
1164 a probepoint and specifies the callback. Kprobes is useful
1165 for kernel debugging, non-intrusive instrumentation and testing.
1166 If in doubt, say "N".
1169 source "arch/i386/Kconfig.debug"
1171 source "security/Kconfig"
1173 source "crypto/Kconfig"
1175 source "lib/Kconfig"
1178 # Use the generic interrupt handling code in kernel/irq/:
1180 config GENERIC_HARDIRQS
1184 config GENERIC_IRQ_PROBE
1188 config GENERIC_PENDING_IRQ
1190 depends on GENERIC_HARDIRQS && SMP
1195 depends on SMP && !X86_VOYAGER
1200 depends on SMP && !(X86_VISWS || X86_VOYAGER)
1203 config X86_BIOS_REBOOT
1205 depends on !(X86_VISWS || X86_VOYAGER)
1208 config X86_TRAMPOLINE
1210 depends on X86_SMP || (X86_VOYAGER && SMP)
projects / mirror_ubuntu-artful-kernel.git / blob