Merge tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupt...

[mirror_ubuntu-hirsute-kernel.git] / arch / ia64 / kernel / time.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * linux/arch/ia64/kernel/time.c
 *
 * Copyright (C) 1998-2003 Hewlett-Packard Co
 *      Stephane Eranian <eranian@hpl.hp.com>
 *      David Mosberger <davidm@hpl.hp.com>
 * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
 * Copyright (C) 1999-2000 VA Linux Systems
 * Copyright (C) 1999-2000 Walt Drummond <drummond@valinux.com>
 */

#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/profile.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/nmi.h>
#include <linux/interrupt.h>
#include <linux/efi.h>
#include <linux/timex.h>
#include <linux/timekeeper_internal.h>
#include <linux/platform_device.h>
#include <linux/sched/cputime.h>

#include <asm/delay.h>
#include <asm/hw_irq.h>
#include <asm/ptrace.h>
#include <asm/sal.h>
#include <asm/sections.h>

#include "fsyscall_gtod_data.h"
#include "irq.h"

static u64 itc_get_cycles(struct clocksource *cs);

struct fsyscall_gtod_data_t fsyscall_gtod_data;

struct itc_jitter_data_t itc_jitter_data;

volatile int time_keeper_id = 0; /* smp_processor_id() of time-keeper */

#ifdef CONFIG_IA64_DEBUG_IRQ

unsigned long last_cli_ip;
EXPORT_SYMBOL(last_cli_ip);

#endif

static struct clocksource clocksource_itc = {
        .name           = "itc",
        .rating         = 350,
        .read           = itc_get_cycles,
        .mask           = CLOCKSOURCE_MASK(64),
        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
};
static struct clocksource *itc_clocksource;

#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE

#include <linux/kernel_stat.h>

extern u64 cycle_to_nsec(u64 cyc);

void vtime_flush(struct task_struct *tsk)
{
        struct thread_info *ti = task_thread_info(tsk);
        u64 delta;

        if (ti->utime)
                account_user_time(tsk, cycle_to_nsec(ti->utime));

        if (ti->gtime)
                account_guest_time(tsk, cycle_to_nsec(ti->gtime));

        if (ti->idle_time)
                account_idle_time(cycle_to_nsec(ti->idle_time));

        if (ti->stime) {
                delta = cycle_to_nsec(ti->stime);
                account_system_index_time(tsk, delta, CPUTIME_SYSTEM);
        }

        if (ti->hardirq_time) {
                delta = cycle_to_nsec(ti->hardirq_time);
                account_system_index_time(tsk, delta, CPUTIME_IRQ);
        }

        if (ti->softirq_time) {
                delta = cycle_to_nsec(ti->softirq_time);
                account_system_index_time(tsk, delta, CPUTIME_SOFTIRQ);
        }

        ti->utime = 0;
        ti->gtime = 0;
        ti->idle_time = 0;
        ti->stime = 0;
        ti->hardirq_time = 0;
        ti->softirq_time = 0;
}

/*
 * Called from the context switch with interrupts disabled, to charge all
 * accumulated times to the current process, and to prepare accounting on
 * the next process.
 */
void arch_vtime_task_switch(struct task_struct *prev)
{
        struct thread_info *pi = task_thread_info(prev);
        struct thread_info *ni = task_thread_info(current);

        ni->ac_stamp = pi->ac_stamp;
        ni->ac_stime = ni->ac_utime = 0;
}

/*
 * Account time for a transition between system, hard irq or soft irq state.
 * Note that this function is called with interrupts enabled.
 */
static __u64 vtime_delta(struct task_struct *tsk)
{
        struct thread_info *ti = task_thread_info(tsk);
        __u64 now, delta_stime;

        WARN_ON_ONCE(!irqs_disabled());

        now = ia64_get_itc();
        delta_stime = now - ti->ac_stamp;
        ti->ac_stamp = now;

        return delta_stime;
}

void vtime_account_kernel(struct task_struct *tsk)
{
        struct thread_info *ti = task_thread_info(tsk);
        __u64 stime = vtime_delta(tsk);

        if ((tsk->flags & PF_VCPU) && !irq_count())
                ti->gtime += stime;
        else if (hardirq_count())
                ti->hardirq_time += stime;
        else if (in_serving_softirq())
                ti->softirq_time += stime;
        else
                ti->stime += stime;
}
EXPORT_SYMBOL_GPL(vtime_account_kernel);

void vtime_account_idle(struct task_struct *tsk)
{
        struct thread_info *ti = task_thread_info(tsk);

        ti->idle_time += vtime_delta(tsk);
}

#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */

static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
        unsigned long new_itm;

        if (cpu_is_offline(smp_processor_id())) {
                return IRQ_HANDLED;
        }

        new_itm = local_cpu_data->itm_next;

        if (!time_after(ia64_get_itc(), new_itm))
                printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
                       ia64_get_itc(), new_itm);

        profile_tick(CPU_PROFILING);

        while (1) {
                update_process_times(user_mode(get_irq_regs()));

                new_itm += local_cpu_data->itm_delta;

                if (smp_processor_id() == time_keeper_id)
                        xtime_update(1);

                local_cpu_data->itm_next = new_itm;

                if (time_after(new_itm, ia64_get_itc()))
                        break;

                /*
                 * Allow IPIs to interrupt the timer loop.
                 */
                local_irq_enable();
                local_irq_disable();
        }

        do {
                /*
                 * If we're too close to the next clock tick for
                 * comfort, we increase the safety margin by
                 * intentionally dropping the next tick(s).  We do NOT
                 * update itm.next because that would force us to call
                 * xtime_update() which in turn would let our clock run
                 * too fast (with the potentially devastating effect
                 * of losing monotony of time).
                 */
                while (!time_after(new_itm, ia64_get_itc() + local_cpu_data->itm_delta/2))
                        new_itm += local_cpu_data->itm_delta;
                ia64_set_itm(new_itm);
                /* double check, in case we got hit by a (slow) PMI: */
        } while (time_after_eq(ia64_get_itc(), new_itm));
        return IRQ_HANDLED;
}

/*
 * Encapsulate access to the itm structure for SMP.
 */
void
ia64_cpu_local_tick (void)
{
        int cpu = smp_processor_id();
        unsigned long shift = 0, delta;

        /* arrange for the cycle counter to generate a timer interrupt: */
        ia64_set_itv(IA64_TIMER_VECTOR);

        delta = local_cpu_data->itm_delta;
        /*
         * Stagger the timer tick for each CPU so they don't occur all at (almost) the
         * same time:
         */
        if (cpu) {
                unsigned long hi = 1UL << ia64_fls(cpu);
                shift = (2*(cpu - hi) + 1) * delta/hi/2;
        }
        local_cpu_data->itm_next = ia64_get_itc() + delta + shift;
        ia64_set_itm(local_cpu_data->itm_next);
}

static int nojitter;

static int __init nojitter_setup(char *str)
{
        nojitter = 1;
        printk("Jitter checking for ITC timers disabled\n");
        return 1;
}

__setup("nojitter", nojitter_setup);


void ia64_init_itm(void)
{
        unsigned long platform_base_freq, itc_freq;
        struct pal_freq_ratio itc_ratio, proc_ratio;
        long status, platform_base_drift, itc_drift;

        /*
         * According to SAL v2.6, we need to use a SAL call to determine the platform base
         * frequency and then a PAL call to determine the frequency ratio between the ITC
         * and the base frequency.
         */
        status = ia64_sal_freq_base(SAL_FREQ_BASE_PLATFORM,
                                    &platform_base_freq, &platform_base_drift);
        if (status != 0) {
                printk(KERN_ERR "SAL_FREQ_BASE_PLATFORM failed: %s\n", ia64_sal_strerror(status));
        } else {
                status = ia64_pal_freq_ratios(&proc_ratio, NULL, &itc_ratio);
                if (status != 0)
                        printk(KERN_ERR "PAL_FREQ_RATIOS failed with status=%ld\n", status);
        }
        if (status != 0) {
                /* invent "random" values */
                printk(KERN_ERR
                       "SAL/PAL failed to obtain frequency info---inventing reasonable values\n");
                platform_base_freq = 100000000;
                platform_base_drift = -1;       /* no drift info */
                itc_ratio.num = 3;
                itc_ratio.den = 1;
        }
        if (platform_base_freq < 40000000) {
                printk(KERN_ERR "Platform base frequency %lu bogus---resetting to 75MHz!\n",
                       platform_base_freq);
                platform_base_freq = 75000000;
                platform_base_drift = -1;
        }
        if (!proc_ratio.den)
                proc_ratio.den = 1;     /* avoid division by zero */
        if (!itc_ratio.den)
                itc_ratio.den = 1;      /* avoid division by zero */

        itc_freq = (platform_base_freq*itc_ratio.num)/itc_ratio.den;

        local_cpu_data->itm_delta = (itc_freq + HZ/2) / HZ;
        printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%u/%u, "
               "ITC freq=%lu.%03luMHz", smp_processor_id(),
               platform_base_freq / 1000000, (platform_base_freq / 1000) % 1000,
               itc_ratio.num, itc_ratio.den, itc_freq / 1000000, (itc_freq / 1000) % 1000);

        if (platform_base_drift != -1) {
                itc_drift = platform_base_drift*itc_ratio.num/itc_ratio.den;
                printk("+/-%ldppm\n", itc_drift);
        } else {
                itc_drift = -1;
                printk("\n");
        }

        local_cpu_data->proc_freq = (platform_base_freq*proc_ratio.num)/proc_ratio.den;
        local_cpu_data->itc_freq = itc_freq;
        local_cpu_data->cyc_per_usec = (itc_freq + USEC_PER_SEC/2) / USEC_PER_SEC;
        local_cpu_data->nsec_per_cyc = ((NSEC_PER_SEC<<IA64_NSEC_PER_CYC_SHIFT)
                                        + itc_freq/2)/itc_freq;

        if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
#ifdef CONFIG_SMP
                /* On IA64 in an SMP configuration ITCs are never accurately synchronized.
                 * Jitter compensation requires a cmpxchg which may limit
                 * the scalability of the syscalls for retrieving time.
                 * The ITC synchronization is usually successful to within a few
                 * ITC ticks but this is not a sure thing. If you need to improve
                 * timer performance in SMP situations then boot the kernel with the
                 * "nojitter" option. However, doing so may result in time fluctuating (maybe
                 * even going backward) if the ITC offsets between the individual CPUs
                 * are too large.
                 */
                if (!nojitter)
                        itc_jitter_data.itc_jitter = 1;
#endif
        } else
                /*
                 * ITC is drifty and we have not synchronized the ITCs in smpboot.c.
                 * ITC values may fluctuate significantly between processors.
                 * Clock should not be used for hrtimers. Mark itc as only
                 * useful for boot and testing.
                 *
                 * Note that jitter compensation is off! There is no point of
                 * synchronizing ITCs since they may be large differentials
                 * that change over time.
                 *
                 * The only way to fix this would be to repeatedly sync the
                 * ITCs. Until that time we have to avoid ITC.
                 */
                clocksource_itc.rating = 50;

        /* avoid softlock up message when cpu is unplug and plugged again. */
        touch_softlockup_watchdog();

        /* Setup the CPU local timer tick */
        ia64_cpu_local_tick();

        if (!itc_clocksource) {
                clocksource_register_hz(&clocksource_itc,
                                                local_cpu_data->itc_freq);
                itc_clocksource = &clocksource_itc;
        }
}

static u64 itc_get_cycles(struct clocksource *cs)
{
        unsigned long lcycle, now, ret;

        if (!itc_jitter_data.itc_jitter)
                return get_cycles();

        lcycle = itc_jitter_data.itc_lastcycle;
        now = get_cycles();
        if (lcycle && time_after(lcycle, now))
                return lcycle;

        /*
         * Keep track of the last timer value returned.
         * In an SMP environment, you could lose out in contention of
         * cmpxchg. If so, your cmpxchg returns new value which the
         * winner of contention updated to. Use the new value instead.
         */
        ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, now);
        if (unlikely(ret != lcycle))
                return ret;

        return now;
}

void read_persistent_clock64(struct timespec64 *ts)
{
        efi_gettimeofday(ts);
}

void __init
time_init (void)
{
        register_percpu_irq(IA64_TIMER_VECTOR, timer_interrupt, IRQF_IRQPOLL,
                            "timer");
        ia64_init_itm();
}

/*
 * Generic udelay assumes that if preemption is allowed and the thread
 * migrates to another CPU, that the ITC values are synchronized across
 * all CPUs.
 */
static void
ia64_itc_udelay (unsigned long usecs)
{
        unsigned long start = ia64_get_itc();
        unsigned long end = start + usecs*local_cpu_data->cyc_per_usec;

        while (time_before(ia64_get_itc(), end))
                cpu_relax();
}

void (*ia64_udelay)(unsigned long usecs) = &ia64_itc_udelay;

void
udelay (unsigned long usecs)
{
        (*ia64_udelay)(usecs);
}
EXPORT_SYMBOL(udelay);

/* IA64 doesn't cache the timezone */
void update_vsyscall_tz(void)
{
}

void update_vsyscall(struct timekeeper *tk)
{
        write_seqcount_begin(&fsyscall_gtod_data.seq);

        /* copy vsyscall data */
        fsyscall_gtod_data.clk_mask = tk->tkr_mono.mask;
        fsyscall_gtod_data.clk_mult = tk->tkr_mono.mult;
        fsyscall_gtod_data.clk_shift = tk->tkr_mono.shift;
        fsyscall_gtod_data.clk_fsys_mmio = tk->tkr_mono.clock->archdata.fsys_mmio;
        fsyscall_gtod_data.clk_cycle_last = tk->tkr_mono.cycle_last;

        fsyscall_gtod_data.wall_time.sec = tk->xtime_sec;
        fsyscall_gtod_data.wall_time.snsec = tk->tkr_mono.xtime_nsec;

        fsyscall_gtod_data.monotonic_time.sec = tk->xtime_sec
                                              + tk->wall_to_monotonic.tv_sec;
        fsyscall_gtod_data.monotonic_time.snsec = tk->tkr_mono.xtime_nsec
                                                + ((u64)tk->wall_to_monotonic.tv_nsec
                                                        << tk->tkr_mono.shift);

        /* normalize */
        while (fsyscall_gtod_data.monotonic_time.snsec >=
                                        (((u64)NSEC_PER_SEC) << tk->tkr_mono.shift)) {
                fsyscall_gtod_data.monotonic_time.snsec -=
                                        ((u64)NSEC_PER_SEC) << tk->tkr_mono.shift;
                fsyscall_gtod_data.monotonic_time.sec++;
        }

        write_seqcount_end(&fsyscall_gtod_data.seq);
}