arch/m32r/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/kconfig-language.txt.
   4 #
   5
   6 mainmenu "Linux/M32R Kernel Configuration"
   7
   8 config M32R
   9         bool
  10         default y
  11
  12 config SBUS
  13         bool
  14
  15 config GENERIC_ISA_DMA
  16         bool
  17         default y
  18
  19 config GENERIC_HARDIRQS
  20         bool
  21         default y
  22
  23 config GENERIC_IRQ_PROBE
  24         bool
  25         default y
  26
  27 source "init/Kconfig"
  28
  29
  30 menu "Processor type and features"
  31
  32 choice
  33         prompt "Platform Type"
  34         default PLAT_MAPPI
  35
  36 config PLAT_MAPPI
  37         bool "Mappi-I"
  38         help
  39           The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
  40           You can operate a Linux system on this board by using an M32R
  41           softmacro core, which is a fully-synthesizable functional model
  42           described in Verilog-HDL.
  43
  44           The Mappi-I board was the first platform, which had been used
  45           to port and develop a Linux system for the M32R processor.
  46           Currently, the Mappi-II, an heir to the Mappi-I, is available.
  47
  48 config PLAT_USRV
  49         bool "uServer"
  50
  51 config PLAT_M32700UT
  52         bool "M32700UT"
  53         help
  54           The M3T-M32700UT is an evaluation board based on uT-Engine
  55           specification.  This board has an M32700 (Chaos) evaluation chip.
  56           You can say Y for SMP, because the M32700 is a single chip
  57           multiprocessor.
  58
  59 config PLAT_OPSPUT
  60         bool "OPSPUT"
  61         help
  62           The OPSPUT is an evaluation board based on uT-Engine
  63           specification.  This board has a OPSP-REP chip.
  64
  65 config PLAT_OAKS32R
  66         bool "OAKS32R"
  67         help
  68           The OAKS32R is a tiny, inexpensive evaluation board.
  69           Please note that if you say Y here and choose chip "M32102",
  70           say N for MMU and select a no-MMU version kernel, otherwise
  71           a kernel with MMU support will not work, because the M32102
  72           is a microcontroller for embedded systems and it has no MMU.
  73
  74 config PLAT_MAPPI2
  75        bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
  76
  77 config PLAT_MAPPI3
  78        bool "Mappi-III(M3A-2170)"
  79
  80 config PLAT_M32104UT
  81         bool "M32104UT"
  82         help
  83           The M3T-M32104UT is an reference board based on uT-Engine
  84           specification.  This board has a M32104 chip.
  85
  86 endchoice
  87
  88 choice
  89         prompt "Processor family"
  90         default CHIP_M32700
  91
  92 config CHIP_M32700
  93         bool "M32700 (Chaos)"
  94
  95 config CHIP_M32102
  96         bool "M32102"
  97
  98 config CHIP_M32104
  99         bool "M32104"
 100         depends on PLAT_M32104UT
 101
 102 config CHIP_VDEC2
 103        bool "VDEC2"
 104
 105 config CHIP_OPSP
 106        bool "OPSP"
 107
 108 endchoice
 109
 110 config MMU
 111         bool "Support for memory management hardware"
 112         depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 113         default y
 114
 115 config TLB_ENTRIES
 116        int "TLB Entries"
 117        depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 118        default 32 if CHIP_M32700 || CHIP_OPSP
 119        default 16 if CHIP_VDEC2
 120
 121
 122 config ISA_M32R
 123         bool
 124         depends on CHIP_M32102 || CHIP_M32104
 125         default y
 126
 127 config ISA_M32R2
 128         bool
 129         depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 130         default y
 131
 132 config ISA_DSP_LEVEL2
 133         bool
 134         depends on CHIP_M32700 || CHIP_OPSP
 135         default y
 136
 137 config ISA_DUAL_ISSUE
 138         bool
 139         depends on CHIP_M32700 || CHIP_OPSP
 140         default y
 141
 142 config BUS_CLOCK
 143         int "Bus Clock [Hz] (integer)"
 144         default "70000000" if PLAT_MAPPI
 145         default "25000000" if PLAT_USRV
 146         default "50000000" if PLAT_MAPPI3
 147         default "50000000" if PLAT_M32700UT
 148         default "50000000" if PLAT_OPSPUT
 149         default "54000000" if PLAT_M32104UT
 150         default "33333333" if PLAT_OAKS32R
 151         default "20000000" if PLAT_MAPPI2
 152
 153 config TIMER_DIVIDE
 154         int "Timer divider (integer)"
 155         default "128"
 156
 157 config CPU_LITTLE_ENDIAN
 158         bool "Generate little endian code"
 159         default n
 160
 161 config MEMORY_START
 162         hex "Physical memory start address (hex)"
 163         default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3
 164         default "08000000" if PLAT_USRV
 165         default "08000000" if PLAT_M32700UT
 166         default "08000000" if PLAT_OPSPUT
 167         default "04000000" if PLAT_M32104UT
 168         default "01000000" if PLAT_OAKS32R
 169
 170 config MEMORY_SIZE
 171         hex "Physical memory size (hex)"
 172         default "08000000" if PLAT_MAPPI3
 173         default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
 174         default "02000000" if PLAT_USRV
 175         default "01000000" if PLAT_M32700UT
 176         default "01000000" if PLAT_OPSPUT
 177         default "01000000" if PLAT_M32104UT
 178         default "00800000" if PLAT_OAKS32R
 179
 180 config NOHIGHMEM
 181         bool
 182         default y
 183
 184 config ARCH_DISCONTIGMEM_ENABLE
 185         bool "Internal RAM Support"
 186         depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
 187         default y
 188
 189 source "mm/Kconfig"
 190
 191 config IRAM_START
 192         hex "Internal memory start address (hex)"
 193         default "00f00000" if !CHIP_M32104
 194         default "00700000" if CHIP_M32104
 195         depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
 196
 197 config IRAM_SIZE
 198         hex "Internal memory size (hex)"
 199         depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
 200         default "00080000" if CHIP_M32700
 201         default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
 202         default "00008000" if CHIP_VDEC2
 203
 204 #
 205 # Define implied options from the CPU selection here
 206 #
 207
 208 config RWSEM_GENERIC_SPINLOCK
 209         bool
 210         depends on M32R
 211         default y
 212
 213 config RWSEM_XCHGADD_ALGORITHM
 214         bool
 215         default n
 216
 217 config GENERIC_CALIBRATE_DELAY
 218         bool
 219         default y
 220
 221 config PREEMPT
 222         bool "Preemptible Kernel"
 223         help
 224           This option reduces the latency of the kernel when reacting to
 225           real-time or interactive events by allowing a low priority process to
 226           be preempted even if it is in kernel mode executing a system call.
 227           This allows applications to run more reliably even when the system is
 228           under load.
 229
 230           Say Y here if you are building a kernel for a desktop, embedded
 231           or real-time system.  Say N if you are unsure.
 232
 233 config SMP
 234         bool "Symmetric multi-processing support"
 235         ---help---
 236           This enables support for systems with more than one CPU. If you have
 237           a system with only one CPU, like most personal computers, say N. If
 238           you have a system with more than one CPU, say Y.
 239
 240           If you say N here, the kernel will run on single and multiprocessor
 241           machines, but will use only one CPU of a multiprocessor machine. If
 242           you say Y here, the kernel will run on many, but not all,
 243           singleprocessor machines. On a singleprocessor machine, the kernel
 244           will run faster if you say N here.
 245
 246           People using multiprocessor machines who say Y here should also say
 247           Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 248           Management" code will be disabled if you say Y here.
 249
 250           See also the <file:Documentation/smp.txt>,
 251           and the SMP-HOWTO available at
 252           <http://www.linuxdoc.org/docs.html#howto>.
 253
 254           If you don't know what to do here, say N.
 255
 256 config CHIP_M32700_TS1
 257         bool "Workaround code for the M32700 TS1 chip's bug"
 258         depends on (CHIP_M32700 && SMP)
 259         default n
 260
 261 config NR_CPUS
 262         int "Maximum number of CPUs (2-32)"
 263         range 2 32
 264         depends on SMP
 265         default "2"
 266         help
 267           This allows you to specify the maximum number of CPUs which this
 268           kernel will support.  The maximum supported value is 32 and the
 269           minimum value which makes sense is 2.
 270
 271           This is purely to save memory - each supported CPU adds
 272           approximately eight kilobytes to the kernel image.
 273
 274 # Common NUMA Features
 275 config NUMA
 276         bool "Numa Memory Allocation Support"
 277         depends on SMP && BROKEN
 278         default n
 279
 280 # turning this on wastes a bunch of space.
 281 # Summit needs it only when NUMA is on
 282 config BOOT_IOREMAP
 283         bool
 284         depends on NUMA
 285         default n
 286
 287 endmenu
 288
 289
 290 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 291
 292 config PCI
 293         bool "PCI support"
 294         depends on BROKEN
 295         default n
 296         help
 297           Find out whether you have a PCI motherboard. PCI is the name of a
 298           bus system, i.e. the way the CPU talks to the other stuff inside
 299           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 300           VESA. If you have PCI, say Y, otherwise N.
 301
 302           The PCI-HOWTO, available from
 303           <http://www.linuxdoc.org/docs.html#howto>, contains valuable
 304           information about which PCI hardware does work under Linux and which
 305           doesn't.
 306
 307 choice
 308         prompt "PCI access mode"
 309         depends on PCI
 310         default PCI_GOANY
 311
 312 config PCI_GOBIOS
 313         bool "BIOS"
 314         ---help---
 315           On PCI systems, the BIOS can be used to detect the PCI devices and
 316           determine their configuration. However, some old PCI motherboards
 317           have BIOS bugs and may crash if this is done. Also, some embedded
 318           PCI-based systems don't have any BIOS at all. Linux can also try to
 319           detect the PCI hardware directly without using the BIOS.
 320
 321           With this option, you can specify how Linux should detect the PCI
 322           devices. If you choose "BIOS", the BIOS will be used, if you choose
 323           "Direct", the BIOS won't be used, and if you choose "Any", the
 324           kernel will try the direct access method and falls back to the BIOS
 325           if that doesn't work. If unsure, go with the default, which is
 326           "Any".
 327
 328 config PCI_GODIRECT
 329         bool "Direct"
 330
 331 config PCI_GOANY
 332         bool "Any"
 333
 334 endchoice
 335
 336 config PCI_BIOS
 337         bool
 338         depends on PCI && (PCI_GOBIOS || PCI_GOANY)
 339         default y
 340
 341 config PCI_DIRECT
 342         bool
 343         depends on PCI && (PCI_GODIRECT || PCI_GOANY)
 344         default y
 345
 346 source "drivers/pci/Kconfig"
 347
 348 config ISA
 349         bool "ISA support"
 350         help
 351           Find out whether you have ISA slots on your motherboard.  ISA is the
 352           name of a bus system, i.e. the way the CPU talks to the other stuff
 353           inside your box.  If you have ISA, say Y, otherwise N.
 354
 355 source "drivers/pcmcia/Kconfig"
 356
 357 source "drivers/pci/hotplug/Kconfig"
 358
 359 endmenu
 360
 361
 362 menu "Executable file formats"
 363
 364 source "fs/Kconfig.binfmt"
 365
 366 endmenu
 367
 368 source "net/Kconfig"
 369
 370 source "drivers/Kconfig"
 371
 372 source "fs/Kconfig"
 373
 374 source "arch/m32r/oprofile/Kconfig"
 375
 376 source "arch/m32r/Kconfig.debug"
 377
 378 source "security/Kconfig"
 379
 380 source "crypto/Kconfig"
 381
 382 source "lib/Kconfig"