arch/m32r/Kconfig

   1 config M32R
   2         bool
   3         default y
   4         select HAVE_IDE
   5         select HAVE_OPROFILE
   6         select INIT_ALL_POSSIBLE
   7         select HAVE_KERNEL_GZIP
   8         select HAVE_KERNEL_BZIP2
   9         select HAVE_KERNEL_LZMA
  10         select ARCH_WANT_IPC_PARSE_VERSION
  11         select HAVE_DEBUG_BUGVERBOSE
  12         select VIRT_TO_BUS
  13         select GENERIC_IRQ_PROBE
  14         select GENERIC_IRQ_SHOW
  15         select GENERIC_ATOMIC64
  16         select ARCH_HAS_DEVMEM_IS_ALLOWED
  17         select ARCH_USES_GETTIMEOFFSET
  18         select MODULES_USE_ELF_RELA
  19         select HAVE_DEBUG_STACKOVERFLOW
  20         select CPU_NO_EFFICIENT_FFS
  21
  22 config SBUS
  23         bool
  24
  25 config GENERIC_ISA_DMA
  26         bool
  27         default y
  28
  29 config ZONE_DMA
  30         bool
  31         default y
  32
  33 config NO_IOPORT_MAP
  34         def_bool y
  35
  36 config NO_DMA
  37         def_bool n
  38
  39 config HZ
  40         int
  41         default 100
  42
  43 source "init/Kconfig"
  44
  45 source "kernel/Kconfig.freezer"
  46
  47
  48 menu "Processor type and features"
  49
  50 choice
  51         prompt "Platform Type"
  52         default PLAT_MAPPI
  53
  54 config PLAT_MAPPI
  55         bool "Mappi-I"
  56         help
  57           The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
  58           You can operate a Linux system on this board by using an M32R
  59           softmacro core, which is a fully-synthesizable functional model
  60           described in Verilog-HDL.
  61
  62           The Mappi-I board was the first platform, which had been used
  63           to port and develop a Linux system for the M32R processor.
  64           Currently, the Mappi-II, an heir to the Mappi-I, is available.
  65
  66 config PLAT_USRV
  67         bool "uServer"
  68         select PLAT_HAS_INT1ICU
  69
  70 config PLAT_M32700UT
  71         bool "M32700UT"
  72         select PLAT_HAS_INT0ICU
  73         select PLAT_HAS_INT1ICU
  74         select PLAT_HAS_INT2ICU
  75         help
  76           The M3T-M32700UT is an evaluation board based on uT-Engine
  77           specification.  This board has an M32700 (Chaos) evaluation chip.
  78           You can say Y for SMP, because the M32700 is a single chip
  79           multiprocessor.
  80
  81 config PLAT_OPSPUT
  82         bool "OPSPUT"
  83         select PLAT_HAS_INT0ICU
  84         select PLAT_HAS_INT1ICU
  85         select PLAT_HAS_INT2ICU
  86         help
  87           The OPSPUT is an evaluation board based on uT-Engine
  88           specification.  This board has a OPSP-REP chip.
  89
  90 config PLAT_OAKS32R
  91         bool "OAKS32R"
  92         help
  93           The OAKS32R is a tiny, inexpensive evaluation board.
  94           Please note that if you say Y here and choose chip "M32102",
  95           say N for MMU and select a no-MMU version kernel, otherwise
  96           a kernel with MMU support will not work, because the M32102
  97           is a microcontroller for embedded systems and it has no MMU.
  98
  99 config PLAT_MAPPI2
 100        bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
 101
 102 config PLAT_MAPPI3
 103        bool "Mappi-III(M3A-2170)"
 104
 105 config PLAT_M32104UT
 106         bool "M32104UT"
 107         select PLAT_HAS_INT1ICU
 108         help
 109           The M3T-M32104UT is an reference board based on uT-Engine
 110           specification.  This board has a M32104 chip.
 111
 112 endchoice
 113
 114 choice
 115         prompt "Processor family"
 116         default CHIP_M32700
 117
 118 config CHIP_M32700
 119         bool "M32700 (Chaos)"
 120
 121 config CHIP_M32102
 122         bool "M32102"
 123
 124 config CHIP_M32104
 125         bool "M32104"
 126         depends on PLAT_M32104UT
 127
 128 config CHIP_VDEC2
 129        bool "VDEC2"
 130
 131 config CHIP_OPSP
 132        bool "OPSP"
 133
 134 endchoice
 135
 136 config MMU
 137         bool "Support for memory management hardware"
 138         depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 139         default y
 140
 141 config TLB_ENTRIES
 142        int "TLB Entries"
 143        depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 144        default 32 if CHIP_M32700 || CHIP_OPSP
 145        default 16 if CHIP_VDEC2
 146
 147
 148 config ISA_M32R
 149         bool
 150         depends on CHIP_M32102 || CHIP_M32104
 151         default y
 152
 153 config ISA_M32R2
 154         bool
 155         depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
 156         default y
 157
 158 config ISA_DSP_LEVEL2
 159         bool
 160         depends on CHIP_M32700 || CHIP_OPSP
 161         default y
 162
 163 config ISA_DUAL_ISSUE
 164         bool
 165         depends on CHIP_M32700 || CHIP_OPSP
 166         default y
 167
 168 config PLAT_HAS_INT0ICU
 169         bool
 170         default n
 171
 172 config PLAT_HAS_INT1ICU
 173         bool
 174         default n
 175
 176 config PLAT_HAS_INT2ICU
 177         bool
 178         default n
 179
 180 config BUS_CLOCK
 181         int "Bus Clock [Hz] (integer)"
 182         default "70000000" if PLAT_MAPPI
 183         default "25000000" if PLAT_USRV
 184         default "50000000" if PLAT_MAPPI3
 185         default "50000000" if PLAT_M32700UT
 186         default "50000000" if PLAT_OPSPUT
 187         default "54000000" if PLAT_M32104UT
 188         default "33333333" if PLAT_OAKS32R
 189         default "20000000" if PLAT_MAPPI2
 190
 191 config TIMER_DIVIDE
 192         int "Timer divider (integer)"
 193         default "128"
 194
 195 config CPU_LITTLE_ENDIAN
 196         bool "Generate little endian code"
 197         default n
 198
 199 config MEMORY_START
 200         hex "Physical memory start address (hex)"
 201         default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3
 202         default "08000000" if PLAT_USRV
 203         default "08000000" if PLAT_M32700UT
 204         default "08000000" if PLAT_OPSPUT
 205         default "04000000" if PLAT_M32104UT
 206         default "01000000" if PLAT_OAKS32R
 207
 208 config MEMORY_SIZE
 209         hex "Physical memory size (hex)"
 210         default "08000000" if PLAT_MAPPI3
 211         default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
 212         default "02000000" if PLAT_USRV
 213         default "01000000" if PLAT_M32700UT
 214         default "01000000" if PLAT_OPSPUT
 215         default "01000000" if PLAT_M32104UT
 216         default "00800000" if PLAT_OAKS32R
 217
 218 config ARCH_DISCONTIGMEM_ENABLE
 219         bool "Internal RAM Support"
 220         depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
 221         default y
 222
 223 source "mm/Kconfig"
 224
 225 config IRAM_START
 226         hex "Internal memory start address (hex)"
 227         default "00f00000" if !CHIP_M32104
 228         default "00700000" if CHIP_M32104
 229         depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
 230
 231 config IRAM_SIZE
 232         hex "Internal memory size (hex)"
 233         depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104) && DISCONTIGMEM
 234         default "00080000" if CHIP_M32700
 235         default "00010000" if CHIP_M32102 || CHIP_OPSP || CHIP_M32104
 236         default "00008000" if CHIP_VDEC2
 237
 238 #
 239 # Define implied options from the CPU selection here
 240 #
 241
 242 config GENERIC_LOCKBREAK
 243         bool
 244         default y
 245         depends on SMP && PREEMPT
 246
 247 config RWSEM_GENERIC_SPINLOCK
 248         bool
 249         depends on M32R
 250         default y
 251
 252 config RWSEM_XCHGADD_ALGORITHM
 253         bool
 254         default n
 255
 256 config ARCH_HAS_ILOG2_U32
 257         bool
 258         default n
 259
 260 config ARCH_HAS_ILOG2_U64
 261         bool
 262         default n
 263
 264 config GENERIC_HWEIGHT
 265         bool
 266         default y
 267
 268 config GENERIC_CALIBRATE_DELAY
 269         bool
 270         default y
 271
 272 config SCHED_OMIT_FRAME_POINTER
 273         bool
 274         default y
 275
 276 source "kernel/Kconfig.preempt"
 277
 278 config SMP
 279         bool "Symmetric multi-processing support"
 280         depends on MMU
 281         ---help---
 282           This enables support for systems with more than one CPU. If you have
 283           a system with only one CPU, say N. If you have a system with more
 284           than one CPU, say Y.
 285
 286           If you say N here, the kernel will run on uni- and multiprocessor
 287           machines, but will use only one CPU of a multiprocessor machine. If
 288           you say Y here, the kernel will run on many, but not all,
 289           uniprocessor machines. On a uniprocessor machine, the kernel
 290           will run faster if you say N here.
 291
 292           People using multiprocessor machines who say Y here should also say
 293           Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 294           Management" code will be disabled if you say Y here.
 295
 296           See also the SMP-HOWTO available at
 297           <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 298
 299           If you don't know what to do here, say N.
 300
 301 config CHIP_M32700_TS1
 302         bool "Workaround code for the M32700 TS1 chip's bug"
 303         depends on (CHIP_M32700 && SMP)
 304         default n
 305
 306 config NR_CPUS
 307         int "Maximum number of CPUs (2-32)"
 308         range 2 32
 309         depends on SMP
 310         default "2"
 311         help
 312           This allows you to specify the maximum number of CPUs which this
 313           kernel will support.  The maximum supported value is 32 and the
 314           minimum value which makes sense is 2.
 315
 316           This is purely to save memory - each supported CPU adds
 317           approximately eight kilobytes to the kernel image.
 318
 319 # Common NUMA Features
 320 config NUMA
 321         bool "Numa Memory Allocation Support"
 322         depends on SMP && BROKEN
 323         default n
 324
 325 config NODES_SHIFT
 326         int
 327         default "1"
 328         depends on NEED_MULTIPLE_NODES
 329
 330 endmenu
 331
 332
 333 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 334
 335 config PCI
 336         bool "PCI support"
 337         depends on BROKEN
 338         default n
 339         help
 340           Find out whether you have a PCI motherboard. PCI is the name of a
 341           bus system, i.e. the way the CPU talks to the other stuff inside
 342           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 343           VESA. If you have PCI, say Y, otherwise N.
 344
 345 choice
 346         prompt "PCI access mode"
 347         depends on PCI
 348         default PCI_GOANY
 349
 350 config PCI_GOBIOS
 351         bool "BIOS"
 352         ---help---
 353           On PCI systems, the BIOS can be used to detect the PCI devices and
 354           determine their configuration. However, some old PCI motherboards
 355           have BIOS bugs and may crash if this is done. Also, some embedded
 356           PCI-based systems don't have any BIOS at all. Linux can also try to
 357           detect the PCI hardware directly without using the BIOS.
 358
 359           With this option, you can specify how Linux should detect the PCI
 360           devices. If you choose "BIOS", the BIOS will be used, if you choose
 361           "Direct", the BIOS won't be used, and if you choose "Any", the
 362           kernel will try the direct access method and falls back to the BIOS
 363           if that doesn't work. If unsure, go with the default, which is
 364           "Any".
 365
 366 config PCI_GODIRECT
 367         bool "Direct"
 368
 369 config PCI_GOANY
 370         bool "Any"
 371
 372 endchoice
 373
 374 config PCI_BIOS
 375         bool
 376         depends on PCI && (PCI_GOBIOS || PCI_GOANY)
 377         default y
 378
 379 config PCI_DIRECT
 380         bool
 381         depends on PCI && (PCI_GODIRECT || PCI_GOANY)
 382         default y
 383
 384 source "drivers/pci/Kconfig"
 385
 386 config ISA
 387         bool
 388
 389 source "drivers/pcmcia/Kconfig"
 390
 391 endmenu
 392
 393
 394 menu "Executable file formats"
 395
 396 source "fs/Kconfig.binfmt"
 397
 398 endmenu
 399
 400 source "net/Kconfig"
 401
 402 source "drivers/Kconfig"
 403
 404 source "fs/Kconfig"
 405
 406 source "arch/m32r/Kconfig.debug"
 407
 408 source "security/Kconfig"
 409
 410 source "crypto/Kconfig"
 411
 412 source "lib/Kconfig"