arch/m68k/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/kconfig-language.txt.
   4 #
   5 config M68K
   6         bool
   7         default y
   8
   9 config MMU
  10         bool
  11         default y
  12
  13 config RWSEM_GENERIC_SPINLOCK
  14         bool
  15         default y
  16
  17 config RWSEM_XCHGADD_ALGORITHM
  18         bool
  19
  20 config ARCH_HAS_ILOG2_U32
  21         bool
  22         default n
  23
  24 config ARCH_HAS_ILOG2_U64
  25         bool
  26         default n
  27
  28 config GENERIC_HWEIGHT
  29         bool
  30         default y
  31
  32 config GENERIC_CALIBRATE_DELAY
  33         bool
  34         default y
  35
  36 config TIME_LOW_RES
  37         bool
  38         default y
  39
  40 config ARCH_MAY_HAVE_PC_FDC
  41         bool
  42         depends on Q40 || (BROKEN && SUN3X)
  43         default y
  44
  45 config NO_IOPORT
  46         def_bool y
  47
  48 mainmenu "Linux/68k Kernel Configuration"
  49
  50 source "init/Kconfig"
  51
  52 menu "Platform dependent setup"
  53
  54 config EISA
  55         bool
  56         ---help---
  57           The Extended Industry Standard Architecture (EISA) bus was
  58           developed as an open alternative to the IBM MicroChannel bus.
  59
  60           The EISA bus provided some of the features of the IBM MicroChannel
  61           bus while maintaining backward compatibility with cards made for
  62           the older ISA bus.  The EISA bus saw limited use between 1988 and
  63           1995 when it was made obsolete by the PCI bus.
  64
  65           Say Y here if you are building a kernel for an EISA-based machine.
  66
  67           Otherwise, say N.
  68
  69 config MCA
  70         bool
  71         help
  72           MicroChannel Architecture is found in some IBM PS/2 machines and
  73           laptops.  It is a bus system similar to PCI or ISA. See
  74           <file:Documentation/mca.txt> (and especially the web page given
  75           there) before attempting to build an MCA bus kernel.
  76
  77 config PCMCIA
  78         tristate
  79         ---help---
  80           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  81           computer.  These are credit-card size devices such as network cards,
  82           modems or hard drives often used with laptops computers.  There are
  83           actually two varieties of these cards: the older 16 bit PCMCIA cards
  84           and the newer 32 bit CardBus cards.  If you want to use CardBus
  85           cards, you need to say Y here and also to "CardBus support" below.
  86
  87           To use your PC-cards, you will need supporting software from David
  88           Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  89           for location).  Please also read the PCMCIA-HOWTO, available from
  90           <http://www.tldp.org/docs.html#howto>.
  91
  92           To compile this driver as modules, choose M here: the
  93           modules will be called pcmcia_core and ds.
  94
  95 config SUN3
  96         bool "Sun3 support"
  97         select M68020
  98         select MMU_SUN3 if MMU
  99         help
 100           This option enables support for the Sun 3 series of workstations
 101           (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
 102           that all other hardware types must be disabled, as Sun 3 kernels
 103           are incompatible with all other m68k targets (including Sun 3x!).
 104
 105           If you don't want to compile a kernel exclusively for a Sun 3, say N.
 106
 107 config AMIGA
 108         bool "Amiga support"
 109         depends on !MMU_SUN3
 110         help
 111           This option enables support for the Amiga series of computers. If
 112           you plan to use this kernel on an Amiga, say Y here and browse the
 113           material available in <file:Documentation/m68k>; otherwise say N.
 114
 115 config ATARI
 116         bool "Atari support"
 117         depends on !MMU_SUN3
 118         help
 119           This option enables support for the 68000-based Atari series of
 120           computers (including the TT, Falcon and Medusa). If you plan to use
 121           this kernel on an Atari, say Y here and browse the material
 122           available in <file:Documentation/m68k>; otherwise say N.
 123
 124 config HADES
 125         bool "Hades support"
 126         depends on ATARI && BROKEN
 127         help
 128           This option enables support for the Hades Atari clone. If you plan
 129           to use this kernel on a Hades, say Y here; otherwise say N.
 130
 131 config PCI
 132         bool
 133         depends on HADES
 134         default y
 135         help
 136           Find out whether you have a PCI motherboard. PCI is the name of a
 137           bus system, i.e. the way the CPU talks to the other stuff inside
 138           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 139           VESA. If you have PCI, say Y, otherwise N.
 140
 141           The PCI-HOWTO, available from
 142           <http://www.tldp.org/docs.html#howto>, contains valuable
 143           information about which PCI hardware does work under Linux and which
 144           doesn't.
 145
 146 config MAC
 147         bool "Macintosh support"
 148         depends on !MMU_SUN3
 149         help
 150           This option enables support for the Apple Macintosh series of
 151           computers (yes, there is experimental support now, at least for part
 152           of the series).
 153
 154           Say N unless you're willing to code the remaining necessary support.
 155           ;)
 156
 157 config NUBUS
 158         bool
 159         depends on MAC
 160         default y
 161
 162 config M68K_L2_CACHE
 163         bool
 164         depends on MAC
 165         default y
 166
 167 config APOLLO
 168         bool "Apollo support"
 169         depends on !MMU_SUN3
 170         help
 171           Say Y here if you want to run Linux on an MC680x0-based Apollo
 172           Domain workstation such as the DN3500.
 173
 174 config VME
 175         bool "VME (Motorola and BVM) support"
 176         depends on !MMU_SUN3
 177         help
 178           Say Y here if you want to build a kernel for a 680x0 based VME
 179           board.  Boards currently supported include Motorola boards MVME147,
 180           MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
 181           BVME6000 boards from BVM Ltd are also supported.
 182
 183 config MVME147
 184         bool "MVME147 support"
 185         depends on VME
 186         help
 187           Say Y to include support for early Motorola VME boards.  This will
 188           build a kernel which can run on MVME147 single-board computers.  If
 189           you select this option you will have to select the appropriate
 190           drivers for SCSI, Ethernet and serial ports later on.
 191
 192 config MVME16x
 193         bool "MVME162, 166 and 167 support"
 194         depends on VME
 195         help
 196           Say Y to include support for Motorola VME boards.  This will build a
 197           kernel which can run on MVME162, MVME166, MVME167, MVME172, and
 198           MVME177 boards.  If you select this option you will have to select
 199           the appropriate drivers for SCSI, Ethernet and serial ports later
 200           on.
 201
 202 config BVME6000
 203         bool "BVME4000 and BVME6000 support"
 204         depends on VME
 205         help
 206           Say Y to include support for VME boards from BVM Ltd.  This will
 207           build a kernel which can run on BVME4000 and BVME6000 boards.  If
 208           you select this option you will have to select the appropriate
 209           drivers for SCSI, Ethernet and serial ports later on.
 210
 211 config HP300
 212         bool "HP9000/300 and HP9000/400 support"
 213         depends on !MMU_SUN3
 214         help
 215           This option enables support for the HP9000/300 and HP9000/400 series
 216           of workstations. Support for these machines is still somewhat
 217           experimental. If you plan to try to use the kernel on such a machine
 218           say Y here.
 219           Everybody else says N.
 220
 221 config DIO
 222         bool "DIO bus support"
 223         depends on HP300
 224         default y
 225         help
 226           Say Y here to enable support for the "DIO" expansion bus used in
 227           HP300 machines. If you are using such a system you almost certainly
 228           want this.
 229
 230 config SUN3X
 231         bool "Sun3x support"
 232         depends on !MMU_SUN3
 233         select M68030
 234         help
 235           This option enables support for the Sun 3x series of workstations.
 236           Be warned that this support is very experimental.
 237           Note that Sun 3x kernels are not compatible with Sun 3 hardware.
 238           General Linux information on the Sun 3x series (now discontinued)
 239           is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
 240
 241           If you don't want to compile a kernel for a Sun 3x, say N.
 242
 243 config Q40
 244         bool "Q40/Q60 support"
 245         depends on !MMU_SUN3
 246         help
 247           The Q40 is a Motorola 68040-based successor to the Sinclair QL
 248           manufactured in Germany.  There is an official Q40 home page at
 249           <http://www.q40.de/>.  This option enables support for the Q40 and
 250           Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
 251           emulation.
 252
 253 comment "Processor type"
 254
 255 config M68020
 256         bool "68020 support"
 257         help
 258           If you anticipate running this kernel on a computer with a MC68020
 259           processor, say Y. Otherwise, say N. Note that the 68020 requires a
 260           68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
 261           Sun 3, which provides its own version.
 262
 263 config M68030
 264         bool "68030 support"
 265         depends on !MMU_SUN3
 266         help
 267           If you anticipate running this kernel on a computer with a MC68030
 268           processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
 269           work, as it does not include an MMU (Memory Management Unit).
 270
 271 config M68040
 272         bool "68040 support"
 273         depends on !MMU_SUN3
 274         help
 275           If you anticipate running this kernel on a computer with a MC68LC040
 276           or MC68040 processor, say Y. Otherwise, say N. Note that an
 277           MC68EC040 will not work, as it does not include an MMU (Memory
 278           Management Unit).
 279
 280 config M68060
 281         bool "68060 support"
 282         depends on !MMU_SUN3
 283         help
 284           If you anticipate running this kernel on a computer with a MC68060
 285           processor, say Y. Otherwise, say N.
 286
 287 config MMU_MOTOROLA
 288         bool
 289         depends on MMU && !MMU_SUN3
 290         default y
 291
 292 config MMU_SUN3
 293         bool
 294
 295 config M68KFPU_EMU
 296         bool "Math emulation support (EXPERIMENTAL)"
 297         depends on EXPERIMENTAL
 298         help
 299           At some point in the future, this will cause floating-point math
 300           instructions to be emulated by the kernel on machines that lack a
 301           floating-point math coprocessor.  Thrill-seekers and chronically
 302           sleep-deprived psychotic hacker types can say Y now, everyone else
 303           should probably wait a while.
 304
 305 config M68KFPU_EMU_EXTRAPREC
 306         bool "Math emulation extra precision"
 307         depends on M68KFPU_EMU
 308         help
 309           The fpu uses normally a few bit more during calculations for
 310           correct rounding, the emulator can (often) do the same but this
 311           extra calculation can cost quite some time, so you can disable
 312           it here. The emulator will then "only" calculate with a 64 bit
 313           mantissa and round slightly incorrect, what is more then enough
 314           for normal usage.
 315
 316 config M68KFPU_EMU_ONLY
 317         bool "Math emulation only kernel"
 318         depends on M68KFPU_EMU
 319         help
 320           This option prevents any floating-point instructions from being
 321           compiled into the kernel, thereby the kernel doesn't save any
 322           floating point context anymore during task switches, so this
 323           kernel will only be usable on machines without a floating-point
 324           math coprocessor. This makes the kernel a bit faster as no tests
 325           needs to be executed whether a floating-point instruction in the
 326           kernel should be executed or not.
 327
 328 config ADVANCED
 329         bool "Advanced configuration options"
 330         ---help---
 331           This gives you access to some advanced options for the CPU. The
 332           defaults should be fine for most users, but these options may make
 333           it possible for you to improve performance somewhat if you know what
 334           you are doing.
 335
 336           Note that the answer to this question won't directly affect the
 337           kernel: saying N will just cause the configurator to skip all
 338           the questions about these options.
 339
 340           Most users should say N to this question.
 341
 342 config RMW_INSNS
 343         bool "Use read-modify-write instructions"
 344         depends on ADVANCED
 345         ---help---
 346           This allows to use certain instructions that work with indivisible
 347           read-modify-write bus cycles. While this is faster than the
 348           workaround of disabling interrupts, it can conflict with DMA
 349           ( = direct memory access) on many Amiga systems, and it is also said
 350           to destabilize other machines. It is very likely that this will
 351           cause serious problems on any Amiga or Atari Medusa if set. The only
 352           configuration where it should work are 68030-based Ataris, where it
 353           apparently improves performance. But you've been warned! Unless you
 354           really know what you are doing, say N. Try Y only if you're quite
 355           adventurous.
 356
 357 config SINGLE_MEMORY_CHUNK
 358         bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
 359         default y if SUN3
 360         select NEED_MULTIPLE_NODES
 361         help
 362           Ignore all but the first contiguous chunk of physical memory for VM
 363           purposes.  This will save a few bytes kernel size and may speed up
 364           some operations.  Say N if not sure.
 365
 366 config 060_WRITETHROUGH
 367         bool "Use write-through caching for 68060 supervisor accesses"
 368         depends on ADVANCED && M68060
 369         ---help---
 370           The 68060 generally uses copyback caching of recently accessed data.
 371           Copyback caching means that memory writes will be held in an on-chip
 372           cache and only written back to memory some time later.  Saying Y
 373           here will force supervisor (kernel) accesses to use writethrough
 374           caching.  Writethrough caching means that data is written to memory
 375           straight away, so that cache and memory data always agree.
 376           Writethrough caching is less efficient, but is needed for some
 377           drivers on 68060 based systems where the 68060 bus snooping signal
 378           is hardwired on.  The 53c710 SCSI driver is known to suffer from
 379           this problem.
 380
 381 config ARCH_DISCONTIGMEM_ENABLE
 382         def_bool !SINGLE_MEMORY_CHUNK
 383
 384 config NODES_SHIFT
 385         int
 386         default "3"
 387         depends on !SINGLE_MEMORY_CHUNK
 388
 389 source "mm/Kconfig"
 390
 391 endmenu
 392
 393 menu "General setup"
 394
 395 source "fs/Kconfig.binfmt"
 396
 397 config ZORRO
 398         bool "Amiga Zorro (AutoConfig) bus support"
 399         depends on AMIGA
 400         help
 401           This enables support for the Zorro bus in the Amiga. If you have
 402           expansion cards in your Amiga that conform to the Amiga
 403           AutoConfig(tm) specification, say Y, otherwise N. Note that even
 404           expansion cards that do not fit in the Zorro slots but fit in e.g.
 405           the CPU slot may fall in this category, so you have to say Y to let
 406           Linux use these.
 407
 408 config AMIGA_PCMCIA
 409         bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
 410         depends on AMIGA && EXPERIMENTAL
 411         help
 412           Include support in the kernel for pcmcia on Amiga 1200 and Amiga
 413           600. If you intend to use pcmcia cards say Y; otherwise say N.
 414
 415 config STRAM_PROC
 416         bool "ST-RAM statistics in /proc"
 417         depends on ATARI
 418         help
 419           Say Y here to report ST-RAM usage statistics in /proc/stram.
 420
 421 config ATARI_KBD_CORE
 422         bool
 423
 424 config HEARTBEAT
 425         bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
 426         default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
 427         help
 428           Use the power-on LED on your machine as a load meter.  The exact
 429           behavior is platform-dependent, but normally the flash frequency is
 430           a hyperbolic function of the 5-minute load average.
 431
 432 # We have a dedicated heartbeat LED. :-)
 433 config PROC_HARDWARE
 434         bool "/proc/hardware support"
 435         help
 436           Say Y here to support the /proc/hardware file, which gives you
 437           access to information about the machine you're running on,
 438           including the model, CPU, MMU, clock speed, BogoMIPS rating,
 439           and memory size.
 440
 441 config ISA
 442         bool
 443         depends on Q40 || AMIGA_PCMCIA || GG2
 444         default y
 445         help
 446           Find out whether you have ISA slots on your motherboard.  ISA is the
 447           name of a bus system, i.e. the way the CPU talks to the other stuff
 448           inside your box.  Other bus systems are PCI, EISA, MicroChannel
 449           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 450           newer boards don't support it.  If you have ISA, say Y, otherwise N.
 451
 452 config GENERIC_ISA_DMA
 453         bool
 454         depends on Q40 || AMIGA_PCMCIA || GG2
 455         default y
 456
 457 config ZONE_DMA
 458         bool
 459         default y
 460
 461 source "drivers/pci/Kconfig"
 462
 463 source "drivers/zorro/Kconfig"
 464
 465 endmenu
 466
 467 source "net/Kconfig"
 468
 469 source "drivers/Kconfig"
 470
 471 menu "Character devices"
 472
 473 config ATARI_MFPSER
 474         tristate "Atari MFP serial support"
 475         depends on ATARI
 476         ---help---
 477           If you like to use the MFP serial ports ("Modem1", "Serial1") under
 478           Linux, say Y. The driver equally supports all kinds of MFP serial
 479           ports and automatically detects whether Serial1 is available.
 480
 481           To compile this driver as a module, choose M here.
 482
 483           Note for Falcon users: You also have an MFP port, it's just not
 484           wired to the outside... But you could use the port under Linux.
 485
 486 config ATARI_SCC
 487         tristate "Atari SCC serial support"
 488         depends on ATARI
 489         ---help---
 490           If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
 491           LAN) and like to use them under Linux, say Y. All built-in SCC's are
 492           supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
 493           two connectors for channel A (Serial2 and LAN), they are visible as
 494           two separate devices.
 495
 496           To compile this driver as a module, choose M here.
 497
 498 config ATARI_SCC_DMA
 499         bool "Atari SCC serial DMA support"
 500         depends on ATARI_SCC
 501         help
 502           This enables DMA support for receiving data on channel A of the SCC.
 503           If you have a TT you may say Y here and read
 504           drivers/char/atari_SCC.README. All other users should say N here,
 505           because only the TT has SCC-DMA, even if your machine keeps claiming
 506           so at boot time.
 507
 508 config ATARI_MIDI
 509         tristate "Atari MIDI serial support"
 510         depends on ATARI
 511         help
 512           If you want to use your Atari's MIDI port in Linux, say Y.
 513
 514           To compile this driver as a module, choose M here.
 515
 516 config ATARI_DSP56K
 517         tristate "Atari DSP56k support (EXPERIMENTAL)"
 518         depends on ATARI && EXPERIMENTAL
 519         help
 520           If you want to be able to use the DSP56001 in Falcons, say Y. This
 521           driver is still experimental, and if you don't know what it is, or
 522           if you don't have this processor, just say N.
 523
 524           To compile this driver as a module, choose M here.
 525
 526 config AMIGA_BUILTIN_SERIAL
 527         tristate "Amiga builtin serial support"
 528         depends on AMIGA
 529         help
 530           If you want to use your Amiga's built-in serial port in Linux,
 531           answer Y.
 532
 533           To compile this driver as a module, choose M here.
 534
 535 config WHIPPET_SERIAL
 536         tristate "Hisoft Whippet PCMCIA serial support"
 537         depends on AMIGA_PCMCIA
 538         help
 539           HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
 540           is no listing for the Whippet in their Amiga section.
 541
 542 config MULTIFACE_III_TTY
 543         tristate "Multiface Card III serial support"
 544         depends on AMIGA
 545         help
 546           If you want to use a Multiface III card's serial port in Linux,
 547           answer Y.
 548
 549           To compile this driver as a module, choose M here.
 550
 551 config GVPIOEXT
 552         tristate "GVP IO-Extender support"
 553         depends on PARPORT=n && ZORRO
 554         help
 555           If you want to use a GVP IO-Extender serial card in Linux, say Y.
 556           Otherwise, say N.
 557
 558 config GVPIOEXT_LP
 559         tristate "GVP IO-Extender parallel printer support"
 560         depends on GVPIOEXT
 561         help
 562           Say Y to enable driving a printer from the parallel port on your
 563           GVP IO-Extender card, N otherwise.
 564
 565 config GVPIOEXT_PLIP
 566         tristate "GVP IO-Extender PLIP support"
 567         depends on GVPIOEXT
 568         help
 569           Say Y to enable doing IP over the parallel port on your GVP
 570           IO-Extender card, N otherwise.
 571
 572 config MAC_SCC
 573         tristate "Macintosh serial support"
 574         depends on MAC
 575
 576 config MAC_HID
 577         bool
 578         depends on INPUT_ADBHID
 579         default y
 580
 581 config MAC_ADBKEYCODES
 582         bool "Support for ADB raw keycodes"
 583         depends on INPUT_ADBHID
 584         help
 585           This provides support for sending raw ADB keycodes to console
 586           devices.  This is the default up to 2.4.0, but in future this may be
 587           phased out in favor of generic Linux keycodes.  If you say Y here,
 588           you can dynamically switch via the
 589           /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 590           sysctl and with the "keyboard_sends_linux_keycodes=" kernel
 591           argument.
 592
 593           If unsure, say Y here.
 594
 595 config ADB_KEYBOARD
 596         bool "Support for ADB keyboard (old driver)"
 597         depends on MAC && !INPUT_ADBHID
 598         help
 599           This option allows you to use an ADB keyboard attached to your
 600           machine. Note that this disables any other (ie. PS/2) keyboard
 601           support, even if your machine is physically capable of using both at
 602           the same time.
 603
 604           If you use an ADB keyboard (4 pin connector), say Y here.
 605           If you use a PS/2 keyboard (6 pin connector), say N here.
 606
 607 config HPDCA
 608         tristate "HP DCA serial support"
 609         depends on DIO && SERIAL_8250
 610         help
 611           If you want to use the internal "DCA" serial ports on an HP300
 612           machine, say Y here.
 613
 614 config HPAPCI
 615         tristate "HP APCI serial support"
 616         depends on HP300 && SERIAL_8250 && EXPERIMENTAL
 617         help
 618           If you want to use the internal "APCI" serial ports on an HP400
 619           machine, say Y here.
 620
 621 config MVME147_SCC
 622         bool "SCC support for MVME147 serial ports"
 623         depends on MVME147
 624         help
 625           This is the driver for the serial ports on the Motorola MVME147
 626           boards.  Everyone using one of these boards should say Y here.
 627
 628 config SERIAL167
 629         bool "CD2401 support for MVME166/7 serial ports"
 630         depends on MVME16x
 631         help
 632           This is the driver for the serial ports on the Motorola MVME166,
 633           167, and 172 boards.  Everyone using one of these boards should say
 634           Y here.
 635
 636 config MVME162_SCC
 637         bool "SCC support for MVME162 serial ports"
 638         depends on MVME16x
 639         help
 640           This is the driver for the serial ports on the Motorola MVME162 and
 641           172 boards.  Everyone using one of these boards should say Y here.
 642
 643 config BVME6000_SCC
 644         bool "SCC support for BVME6000 serial ports"
 645         depends on BVME6000
 646         help
 647           This is the driver for the serial ports on the BVME4000 and BVME6000
 648           boards from BVM Ltd.  Everyone using one of these boards should say
 649           Y here.
 650
 651 config DN_SERIAL
 652         bool "Support for DN serial port (dummy)"
 653         depends on APOLLO
 654
 655 config SERIAL_CONSOLE
 656         bool "Support for serial port console"
 657         depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 658         ---help---
 659           If you say Y here, it will be possible to use a serial port as the
 660           system console (the system console is the device which receives all
 661           kernel messages and warnings and which allows logins in single user
 662           mode). This could be useful if some terminal or printer is connected
 663           to that serial port.
 664
 665           Even if you say Y here, the currently visible virtual console
 666           (/dev/tty0) will still be used as the system console by default, but
 667           you can alter that using a kernel command line option such as
 668           "console=ttyS1". (Try "man bootparam" or see the documentation of
 669           your boot loader (lilo or loadlin) about how to pass options to the
 670           kernel at boot time.)
 671
 672           If you don't have a VGA card installed and you say Y here, the
 673           kernel will automatically use the first serial line, /dev/ttyS0, as
 674           system console.
 675
 676           If unsure, say N.
 677
 678 endmenu
 679
 680 source "fs/Kconfig"
 681
 682 source "arch/m68k/Kconfig.debug"
 683
 684 source "security/Kconfig"
 685
 686 source "crypto/Kconfig"
 687
 688 source "lib/Kconfig"