Linux-2.6.12-rc2

[mirror_ubuntu-artful-kernel.git] / arch / m68k / ifpsp060 / src / fpsp.S

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
M68000 Hi-Performance Microprocessor Division
M68060 Software Package
Production Release P1.00 -- October 10, 1994

M68060 Software Package Copyright © 1993, 1994 Motorola Inc.  All rights reserved.

THE SOFTWARE is provided on an "AS IS" basis and without warranty.
To the maximum extent permitted by applicable law,
MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
and any warranty against infringement with regard to the SOFTWARE
(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.

To the maximum extent permitted by applicable law,
IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.

You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
so long as this entire notice is retained without alteration in any modified and/or
redistributed versions, and that such modified versions are clearly identified as such.
No licenses are granted by implication, estoppel or otherwise under any patents
or trademarks of Motorola, Inc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
# freal.s:
#       This file is appended to the top of the 060FPSP package
# and contains the entry points into the package. The user, in
# effect, branches to one of the branch table entries located
# after _060FPSP_TABLE.
#       Also, subroutine stubs exist in this file (_fpsp_done for
# example) that are referenced by the FPSP package itself in order
# to call a given routine. The stub routine actually performs the
# callout. The FPSP code does a "bsr" to the stub routine. This
# extra layer of hierarchy adds a slight performance penalty but
# it makes the FPSP code easier to read and more mainatinable.
#

set     _off_bsun,      0x00
set     _off_snan,      0x04
set     _off_operr,     0x08
set     _off_ovfl,      0x0c
set     _off_unfl,      0x10
set     _off_dz,        0x14
set     _off_inex,      0x18
set     _off_fline,     0x1c
set     _off_fpu_dis,   0x20
set     _off_trap,      0x24
set     _off_trace,     0x28
set     _off_access,    0x2c
set     _off_done,      0x30

set     _off_imr,       0x40
set     _off_dmr,       0x44
set     _off_dmw,       0x48
set     _off_irw,       0x4c
set     _off_irl,       0x50
set     _off_drb,       0x54
set     _off_drw,       0x58
set     _off_drl,       0x5c
set     _off_dwb,       0x60
set     _off_dww,       0x64
set     _off_dwl,       0x68

_060FPSP_TABLE:

###############################################################

# Here's the table of ENTRY POINTS for those linking the package.
        bra.l           _fpsp_snan
        short           0x0000
        bra.l           _fpsp_operr
        short           0x0000
        bra.l           _fpsp_ovfl
        short           0x0000
        bra.l           _fpsp_unfl
        short           0x0000
        bra.l           _fpsp_dz
        short           0x0000
        bra.l           _fpsp_inex
        short           0x0000
        bra.l           _fpsp_fline
        short           0x0000
        bra.l           _fpsp_unsupp
        short           0x0000
        bra.l           _fpsp_effadd
        short           0x0000

        space           56

###############################################################
        global          _fpsp_done
_fpsp_done:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_done,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_ovfl
_real_ovfl:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_ovfl,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_unfl
_real_unfl:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_unfl,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_inex
_real_inex:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_inex,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_bsun
_real_bsun:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_bsun,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_operr
_real_operr:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_operr,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_snan
_real_snan:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_snan,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_dz
_real_dz:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dz,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_fline
_real_fline:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_fline,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_fpu_disabled
_real_fpu_disabled:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_fpu_dis,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_trap
_real_trap:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_trap,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_trace
_real_trace:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_trace,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _real_access
_real_access:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_access,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

#######################################

        global          _imem_read
_imem_read:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_imr,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_read
_dmem_read:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dmr,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_write
_dmem_write:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dmw,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _imem_read_word
_imem_read_word:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_irw,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _imem_read_long
_imem_read_long:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_irl,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_read_byte
_dmem_read_byte:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_drb,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_read_word
_dmem_read_word:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_drw,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_read_long
_dmem_read_long:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_drl,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_write_byte
_dmem_write_byte:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dwb,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_write_word
_dmem_write_word:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dww,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

        global          _dmem_write_long
_dmem_write_long:
        mov.l           %d0,-(%sp)
        mov.l           (_060FPSP_TABLE-0x80+_off_dwl,%pc),%d0
        pea.l           (_060FPSP_TABLE-0x80,%pc,%d0)
        mov.l           0x4(%sp),%d0
        rtd             &0x4

#
# This file contains a set of define statements for constants
# in order to promote readability within the corecode itself.
#

set LOCAL_SIZE,         192                     # stack frame size(bytes)
set LV,                 -LOCAL_SIZE             # stack offset

set EXC_SR,             0x4                     # stack status register
set EXC_PC,             0x6                     # stack pc
set EXC_VOFF,           0xa                     # stacked vector offset
set EXC_EA,             0xc                     # stacked <ea>

set EXC_FP,             0x0                     # frame pointer

set EXC_AREGS,          -68                     # offset of all address regs
set EXC_DREGS,          -100                    # offset of all data regs
set EXC_FPREGS,         -36                     # offset of all fp regs

set EXC_A7,             EXC_AREGS+(7*4)         # offset of saved a7
set OLD_A7,             EXC_AREGS+(6*4)         # extra copy of saved a7
set EXC_A6,             EXC_AREGS+(6*4)         # offset of saved a6
set EXC_A5,             EXC_AREGS+(5*4)
set EXC_A4,             EXC_AREGS+(4*4)
set EXC_A3,             EXC_AREGS+(3*4)
set EXC_A2,             EXC_AREGS+(2*4)
set EXC_A1,             EXC_AREGS+(1*4)
set EXC_A0,             EXC_AREGS+(0*4)
set EXC_D7,             EXC_DREGS+(7*4)
set EXC_D6,             EXC_DREGS+(6*4)
set EXC_D5,             EXC_DREGS+(5*4)
set EXC_D4,             EXC_DREGS+(4*4)
set EXC_D3,             EXC_DREGS+(3*4)
set EXC_D2,             EXC_DREGS+(2*4)
set EXC_D1,             EXC_DREGS+(1*4)
set EXC_D0,             EXC_DREGS+(0*4)

set EXC_FP0,            EXC_FPREGS+(0*12)       # offset of saved fp0
set EXC_FP1,            EXC_FPREGS+(1*12)       # offset of saved fp1
set EXC_FP2,            EXC_FPREGS+(2*12)       # offset of saved fp2 (not used)

set FP_SCR1,            LV+80                   # fp scratch 1
set FP_SCR1_EX,         FP_SCR1+0
set FP_SCR1_SGN,        FP_SCR1+2
set FP_SCR1_HI,         FP_SCR1+4
set FP_SCR1_LO,         FP_SCR1+8

set FP_SCR0,            LV+68                   # fp scratch 0
set FP_SCR0_EX,         FP_SCR0+0
set FP_SCR0_SGN,        FP_SCR0+2
set FP_SCR0_HI,         FP_SCR0+4
set FP_SCR0_LO,         FP_SCR0+8

set FP_DST,             LV+56                   # fp destination operand
set FP_DST_EX,          FP_DST+0
set FP_DST_SGN,         FP_DST+2
set FP_DST_HI,          FP_DST+4
set FP_DST_LO,          FP_DST+8

set FP_SRC,             LV+44                   # fp source operand
set FP_SRC_EX,          FP_SRC+0
set FP_SRC_SGN,         FP_SRC+2
set FP_SRC_HI,          FP_SRC+4
set FP_SRC_LO,          FP_SRC+8

set USER_FPIAR,         LV+40                   # FP instr address register

set USER_FPSR,          LV+36                   # FP status register
set FPSR_CC,            USER_FPSR+0             # FPSR condition codes
set FPSR_QBYTE,         USER_FPSR+1             # FPSR qoutient byte
set FPSR_EXCEPT,        USER_FPSR+2             # FPSR exception status byte
set FPSR_AEXCEPT,       USER_FPSR+3             # FPSR accrued exception byte

set USER_FPCR,          LV+32                   # FP control register
set FPCR_ENABLE,        USER_FPCR+2             # FPCR exception enable
set FPCR_MODE,          USER_FPCR+3             # FPCR rounding mode control

set L_SCR3,             LV+28                   # integer scratch 3
set L_SCR2,             LV+24                   # integer scratch 2
set L_SCR1,             LV+20                   # integer scratch 1

set STORE_FLG,          LV+19                   # flag: operand store (ie. not fcmp/ftst)

set EXC_TEMP2,          LV+24                   # temporary space
set EXC_TEMP,           LV+16                   # temporary space

set DTAG,               LV+15                   # destination operand type
set STAG,               LV+14                   # source operand type

set SPCOND_FLG,         LV+10                   # flag: special case (see below)

set EXC_CC,             LV+8                    # saved condition codes
set EXC_EXTWPTR,        LV+4                    # saved current PC (active)
set EXC_EXTWORD,        LV+2                    # saved extension word
set EXC_CMDREG,         LV+2                    # saved extension word
set EXC_OPWORD,         LV+0                    # saved operation word

################################

# Helpful macros

set FTEMP,              0                       # offsets within an
set FTEMP_EX,           0                       # extended precision
set FTEMP_SGN,          2                       # value saved in memory.
set FTEMP_HI,           4
set FTEMP_LO,           8
set FTEMP_GRS,          12

set LOCAL,              0                       # offsets within an
set LOCAL_EX,           0                       # extended precision
set LOCAL_SGN,          2                       # value saved in memory.
set LOCAL_HI,           4
set LOCAL_LO,           8
set LOCAL_GRS,          12

set DST,                0                       # offsets within an
set DST_EX,             0                       # extended precision
set DST_HI,             4                       # value saved in memory.
set DST_LO,             8

set SRC,                0                       # offsets within an
set SRC_EX,             0                       # extended precision
set SRC_HI,             4                       # value saved in memory.
set SRC_LO,             8

set SGL_LO,             0x3f81                  # min sgl prec exponent
set SGL_HI,             0x407e                  # max sgl prec exponent
set DBL_LO,             0x3c01                  # min dbl prec exponent
set DBL_HI,             0x43fe                  # max dbl prec exponent
set EXT_LO,             0x0                     # min ext prec exponent
set EXT_HI,             0x7ffe                  # max ext prec exponent

set EXT_BIAS,           0x3fff                  # extended precision bias
set SGL_BIAS,           0x007f                  # single precision bias
set DBL_BIAS,           0x03ff                  # double precision bias

set NORM,               0x00                    # operand type for STAG/DTAG
set ZERO,               0x01                    # operand type for STAG/DTAG
set INF,                0x02                    # operand type for STAG/DTAG
set QNAN,               0x03                    # operand type for STAG/DTAG
set DENORM,             0x04                    # operand type for STAG/DTAG
set SNAN,               0x05                    # operand type for STAG/DTAG
set UNNORM,             0x06                    # operand type for STAG/DTAG

##################
# FPSR/FPCR bits #
##################
set neg_bit,            0x3                     # negative result
set z_bit,              0x2                     # zero result
set inf_bit,            0x1                     # infinite result
set nan_bit,            0x0                     # NAN result

set q_sn_bit,           0x7                     # sign bit of quotient byte

set bsun_bit,           7                       # branch on unordered
set snan_bit,           6                       # signalling NAN
set operr_bit,          5                       # operand error
set ovfl_bit,           4                       # overflow
set unfl_bit,           3                       # underflow
set dz_bit,             2                       # divide by zero
set inex2_bit,          1                       # inexact result 2
set inex1_bit,          0                       # inexact result 1

set aiop_bit,           7                       # accrued inexact operation bit
set aovfl_bit,          6                       # accrued overflow bit
set aunfl_bit,          5                       # accrued underflow bit
set adz_bit,            4                       # accrued dz bit
set ainex_bit,          3                       # accrued inexact bit

#############################
# FPSR individual bit masks #
#############################
set neg_mask,           0x08000000              # negative bit mask (lw)
set inf_mask,           0x02000000              # infinity bit mask (lw)
set z_mask,             0x04000000              # zero bit mask (lw)
set nan_mask,           0x01000000              # nan bit mask (lw)

set neg_bmask,          0x08                    # negative bit mask (byte)
set inf_bmask,          0x02                    # infinity bit mask (byte)
set z_bmask,            0x04                    # zero bit mask (byte)
set nan_bmask,          0x01                    # nan bit mask (byte)

set bsun_mask,          0x00008000              # bsun exception mask
set snan_mask,          0x00004000              # snan exception mask
set operr_mask,         0x00002000              # operr exception mask
set ovfl_mask,          0x00001000              # overflow exception mask
set unfl_mask,          0x00000800              # underflow exception mask
set dz_mask,            0x00000400              # dz exception mask
set inex2_mask,         0x00000200              # inex2 exception mask
set inex1_mask,         0x00000100              # inex1 exception mask

set aiop_mask,          0x00000080              # accrued illegal operation
set aovfl_mask,         0x00000040              # accrued overflow
set aunfl_mask,         0x00000020              # accrued underflow
set adz_mask,           0x00000010              # accrued divide by zero
set ainex_mask,         0x00000008              # accrued inexact

######################################
# FPSR combinations used in the FPSP #
######################################
set dzinf_mask,         inf_mask+dz_mask+adz_mask
set opnan_mask,         nan_mask+operr_mask+aiop_mask
set nzi_mask,           0x01ffffff              #clears N, Z, and I
set unfinx_mask,        unfl_mask+inex2_mask+aunfl_mask+ainex_mask
set unf2inx_mask,       unfl_mask+inex2_mask+ainex_mask
set ovfinx_mask,        ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
set inx1a_mask,         inex1_mask+ainex_mask
set inx2a_mask,         inex2_mask+ainex_mask
set snaniop_mask,       nan_mask+snan_mask+aiop_mask
set snaniop2_mask,      snan_mask+aiop_mask
set naniop_mask,        nan_mask+aiop_mask
set neginf_mask,        neg_mask+inf_mask
set infaiop_mask,       inf_mask+aiop_mask
set negz_mask,          neg_mask+z_mask
set opaop_mask,         operr_mask+aiop_mask
set unfl_inx_mask,      unfl_mask+aunfl_mask+ainex_mask
set ovfl_inx_mask,      ovfl_mask+aovfl_mask+ainex_mask

#########
# misc. #
#########
set rnd_stky_bit,       29                      # stky bit pos in longword

set sign_bit,           0x7                     # sign bit
set signan_bit,         0x6                     # signalling nan bit

set sgl_thresh,         0x3f81                  # minimum sgl exponent
set dbl_thresh,         0x3c01                  # minimum dbl exponent

set x_mode,             0x0                     # extended precision
set s_mode,             0x4                     # single precision
set d_mode,             0x8                     # double precision

set rn_mode,            0x0                     # round-to-nearest
set rz_mode,            0x1                     # round-to-zero
set rm_mode,            0x2                     # round-tp-minus-infinity
set rp_mode,            0x3                     # round-to-plus-infinity

set mantissalen,        64                      # length of mantissa in bits

set BYTE,               1                       # len(byte) == 1 byte
set WORD,               2                       # len(word) == 2 bytes
set LONG,               4                       # len(longword) == 2 bytes

set BSUN_VEC,           0xc0                    # bsun    vector offset
set INEX_VEC,           0xc4                    # inexact vector offset
set DZ_VEC,             0xc8                    # dz      vector offset
set UNFL_VEC,           0xcc                    # unfl    vector offset
set OPERR_VEC,          0xd0                    # operr   vector offset
set OVFL_VEC,           0xd4                    # ovfl    vector offset
set SNAN_VEC,           0xd8                    # snan    vector offset

###########################
# SPecial CONDition FLaGs #
###########################
set ftrapcc_flg,        0x01                    # flag bit: ftrapcc exception
set fbsun_flg,          0x02                    # flag bit: bsun exception
set mia7_flg,           0x04                    # flag bit: (a7)+ <ea>
set mda7_flg,           0x08                    # flag bit: -(a7) <ea>
set fmovm_flg,          0x40                    # flag bit: fmovm instruction
set immed_flg,          0x80                    # flag bit: &<data> <ea>

set ftrapcc_bit,        0x0
set fbsun_bit,          0x1
set mia7_bit,           0x2
set mda7_bit,           0x3
set immed_bit,          0x7

##################################
# TRANSCENDENTAL "LAST-OP" FLAGS #
##################################
set FMUL_OP,            0x0                     # fmul instr performed last
set FDIV_OP,            0x1                     # fdiv performed last
set FADD_OP,            0x2                     # fadd performed last
set FMOV_OP,            0x3                     # fmov performed last

#############
# CONSTANTS #
#############
T1:     long            0x40C62D38,0xD3D64634   # 16381 LOG2 LEAD
T2:     long            0x3D6F90AE,0xB1E75CC7   # 16381 LOG2 TRAIL

PI:     long            0x40000000,0xC90FDAA2,0x2168C235,0x00000000
PIBY2:  long            0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000

TWOBYPI:
        long            0x3FE45F30,0x6DC9C883

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_ovfl(): 060FPSP entry point for FP Overflow exception.    #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Overflow exception in an operating system.                   #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       set_tag_x() - determine optype of src/dst operands              #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       unnorm_fix() - change UNNORM operands to NORM or ZERO           #
#       load_fpn2() - load dst operand from FP regfile                  #
#       fout() - emulate an opclass 3 instruction                       #
#       tbl_unsupp - add of table of emulation routines for opclass 0,2 #
#       _fpsp_done() - "callout" for 060FPSP exit (all work done!)      #
#       _real_ovfl() - "callout" for Overflow exception enabled code    #
#       _real_inex() - "callout" for Inexact exception enabled code     #
#       _real_trace() - "callout" for Trace exception code              #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP Ovfl exception stack frame   #
#       - The fsave frame contains the source operand                   #
#                                                                       #
# OUTPUT ************************************************************** #
#       Overflow Exception enabled:                                     #
#       - The system stack is unchanged                                 #
#       - The fsave frame contains the adjusted src op for opclass 0,2  #
#       Overflow Exception disabled:                                    #
#       - The system stack is unchanged                                 #
#       - The "exception present" flag in the fsave frame is cleared    #
#                                                                       #
# ALGORITHM *********************************************************** #
#       On the 060, if an FP overflow is present as the result of any   #
# instruction, the 060 will take an overflow exception whether the      #
# exception is enabled or disabled in the FPCR. For the disabled case,  #
# This handler emulates the instruction to determine what the correct   #
# default result should be for the operation. This default result is    #
# then stored in either the FP regfile, data regfile, or memory.        #
# Finally, the handler exits through the "callout" _fpsp_done()         #
# denoting that no exceptional conditions exist within the machine.     #
#       If the exception is enabled, then this handler must create the  #
# exceptional operand and plave it in the fsave state frame, and store  #
# the default result (only if the instruction is opclass 3). For        #
# exceptions enabled, this handler must exit through the "callout"      #
# _real_ovfl() so that the operating system enabled overflow handler    #
# can handle this case.                                                 #
#       Two other conditions exist. First, if overflow was disabled     #
# but the inexact exception was enabled, this handler must exit         #
# through the "callout" _real_inex() regardless of whether the result   #
# was inexact.                                                          #
#       Also, in the case of an opclass three instruction where         #
# overflow was disabled and the trace exception was enabled, this       #
# handler must exit through the "callout" _real_trace().                #
#                                                                       #
#########################################################################

        global          _fpsp_ovfl
_fpsp_ovfl:

#$#     sub.l           &24,%sp                 # make room for src/dst

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################

        btst            &0x5,EXC_CMDREG(%a6)    # is instr an fmove out?
        bne.w           fovfl_out


        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

# since, I believe, only NORMs and DENORMs can come through here,
# maybe we can avoid the subroutine call.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           set_tag_x               # tag the operand type
        mov.b           %d0,STAG(%a6)           # maybe NORM,DENORM

# bit five of the fp extension word separates the monadic and dyadic operations
# that can pass through fpsp_ovfl(). remember that fcmp, ftst, and fsincos
# will never take this exception.
        btst            &0x5,1+EXC_CMDREG(%a6)  # is operation monadic or dyadic?
        beq.b           fovfl_extract           # monadic

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
        bsr.l           load_fpn2               # load dst into FP_DST

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           fovfl_op2_done          # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO
fovfl_op2_done:
        mov.b           %d0,DTAG(%a6)           # save dst optype tag

fovfl_extract:

#$#     mov.l           FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
#$#     mov.l           FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
#$#     mov.l           FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
#$#     mov.l           FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
#$#     mov.l           FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
#$#     mov.l           FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec/mode

        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.w          &0x007f,%d1             # extract extension

        andi.l          &0x00ff01ff,USER_FPSR(%a6) # zero all but accured field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

# maybe we can make these entry points ONLY the OVFL entry points of each routine.
        mov.l           (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

# the operation has been emulated. the result is in fp0.
# the EXOP, if an exception occurred, is in fp1.
# we must save the default result regardless of whether
# traps are enabled or disabled.
        bfextu          EXC_CMDREG(%a6){&6:&3},%d0
        bsr.l           store_fpreg

# the exceptional possibilities we have left ourselves with are ONLY overflow
# and inexact. and, the inexact is such that overflow occurred and was disabled
# but inexact was enabled.
        btst            &ovfl_bit,FPCR_ENABLE(%a6)
        bne.b           fovfl_ovfl_on

        btst            &inex2_bit,FPCR_ENABLE(%a6)
        bne.b           fovfl_inex_on

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
#$#     add.l           &24,%sp
        bra.l           _fpsp_done

# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
# in fp1. now, simply jump to _real_ovfl()!
fovfl_ovfl_on:
        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP (fp1) to stack

        mov.w           &0xe005,2+FP_SRC(%a6)   # save exc status

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # do this after fmovm,other f<op>s!

        unlk            %a6

        bra.l           _real_ovfl

# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
# we must jump to real_inex().
fovfl_inex_on:

        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP (fp1) to stack

        mov.b           &0xc4,1+EXC_VOFF(%a6)   # vector offset = 0xc4
        mov.w           &0xe001,2+FP_SRC(%a6)   # save exc status

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # do this after fmovm,other f<op>s!

        unlk            %a6

        bra.l           _real_inex

########################################################################
fovfl_out:


#$#     mov.l           FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
#$#     mov.l           FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
#$#     mov.l           FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)

# the src operand is definitely a NORM(!), so tag it as such
        mov.b           &NORM,STAG(%a6)         # set src optype tag

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec/mode

        and.l           &0xffff00ff,USER_FPSR(%a6) # zero all but accured field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        lea             FP_SRC(%a6),%a0         # pass ptr to src operand

        bsr.l           fout

        btst            &ovfl_bit,FPCR_ENABLE(%a6)
        bne.w           fovfl_ovfl_on

        btst            &inex2_bit,FPCR_ENABLE(%a6)
        bne.w           fovfl_inex_on

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
#$#     add.l           &24,%sp

        btst            &0x7,(%sp)              # is trace on?
        beq.l           _fpsp_done              # no

        fmov.l          %fpiar,0x8(%sp)         # "Current PC" is in FPIAR
        mov.w           &0x2024,0x6(%sp)        # stk fmt = 0x2; voff = 0x024
        bra.l           _real_trace

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_unfl(): 060FPSP entry point for FP Underflow exception.   #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Underflow exception in an operating system.                  #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       set_tag_x() - determine optype of src/dst operands              #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       unnorm_fix() - change UNNORM operands to NORM or ZERO           #
#       load_fpn2() - load dst operand from FP regfile                  #
#       fout() - emulate an opclass 3 instruction                       #
#       tbl_unsupp - add of table of emulation routines for opclass 0,2 #
#       _fpsp_done() - "callout" for 060FPSP exit (all work done!)      #
#       _real_ovfl() - "callout" for Overflow exception enabled code    #
#       _real_inex() - "callout" for Inexact exception enabled code     #
#       _real_trace() - "callout" for Trace exception code              #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP Unfl exception stack frame   #
#       - The fsave frame contains the source operand                   #
#                                                                       #
# OUTPUT ************************************************************** #
#       Underflow Exception enabled:                                    #
#       - The system stack is unchanged                                 #
#       - The fsave frame contains the adjusted src op for opclass 0,2  #
#       Underflow Exception disabled:                                   #
#       - The system stack is unchanged                                 #
#       - The "exception present" flag in the fsave frame is cleared    #
#                                                                       #
# ALGORITHM *********************************************************** #
#       On the 060, if an FP underflow is present as the result of any  #
# instruction, the 060 will take an underflow exception whether the     #
# exception is enabled or disabled in the FPCR. For the disabled case,  #
# This handler emulates the instruction to determine what the correct   #
# default result should be for the operation. This default result is    #
# then stored in either the FP regfile, data regfile, or memory.        #
# Finally, the handler exits through the "callout" _fpsp_done()         #
# denoting that no exceptional conditions exist within the machine.     #
#       If the exception is enabled, then this handler must create the  #
# exceptional operand and plave it in the fsave state frame, and store  #
# the default result (only if the instruction is opclass 3). For        #
# exceptions enabled, this handler must exit through the "callout"      #
# _real_unfl() so that the operating system enabled overflow handler    #
# can handle this case.                                                 #
#       Two other conditions exist. First, if underflow was disabled    #
# but the inexact exception was enabled and the result was inexact,     #
# this handler must exit through the "callout" _real_inex().            #
# was inexact.                                                          #
#       Also, in the case of an opclass three instruction where         #
# underflow was disabled and the trace exception was enabled, this      #
# handler must exit through the "callout" _real_trace().                #
#                                                                       #
#########################################################################

        global          _fpsp_unfl
_fpsp_unfl:

#$#     sub.l           &24,%sp                 # make room for src/dst

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################

        btst            &0x5,EXC_CMDREG(%a6)    # is instr an fmove out?
        bne.w           funfl_out


        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           set_tag_x               # tag the operand type
        mov.b           %d0,STAG(%a6)           # maybe NORM,DENORM

# bit five of the fp ext word separates the monadic and dyadic operations
# that can pass through fpsp_unfl(). remember that fcmp, and ftst
# will never take this exception.
        btst            &0x5,1+EXC_CMDREG(%a6)  # is op monadic or dyadic?
        beq.b           funfl_extract           # monadic

# now, what's left that's not dyadic is fsincos. we can distinguish it
# from all dyadics by the '0110xxx pattern
        btst            &0x4,1+EXC_CMDREG(%a6)  # is op an fsincos?
        bne.b           funfl_extract           # yes

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
        bsr.l           load_fpn2               # load dst into FP_DST

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           funfl_op2_done          # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO
funfl_op2_done:
        mov.b           %d0,DTAG(%a6)           # save dst optype tag

funfl_extract:

#$#     mov.l           FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
#$#     mov.l           FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
#$#     mov.l           FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)
#$#     mov.l           FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6)
#$#     mov.l           FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6)
#$#     mov.l           FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6)

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec/mode

        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.w          &0x007f,%d1             # extract extension

        andi.l          &0x00ff01ff,USER_FPSR(%a6)

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

# maybe we can make these entry points ONLY the OVFL entry points of each routine.
        mov.l           (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0
        bsr.l           store_fpreg

# The `060 FPU multiplier hardware is such that if the result of a
# multiply operation is the smallest possible normalized number
# (0x00000000_80000000_00000000), then the machine will take an
# underflow exception. Since this is incorrect, we need to check
# if our emulation, after re-doing the operation, decided that
# no underflow was called for. We do these checks only in
# funfl_{unfl,inex}_on() because w/ both exceptions disabled, this
# special case will simply exit gracefully with the correct result.

# the exceptional possibilities we have left ourselves with are ONLY overflow
# and inexact. and, the inexact is such that overflow occurred and was disabled
# but inexact was enabled.
        btst            &unfl_bit,FPCR_ENABLE(%a6)
        bne.b           funfl_unfl_on

funfl_chkinex:
        btst            &inex2_bit,FPCR_ENABLE(%a6)
        bne.b           funfl_inex_on

funfl_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
#$#     add.l           &24,%sp
        bra.l           _fpsp_done

# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP
# in fp1 (don't forget to save fp0). what to do now?
# well, we simply have to get to go to _real_unfl()!
funfl_unfl_on:

# The `060 FPU multiplier hardware is such that if the result of a
# multiply operation is the smallest possible normalized number
# (0x00000000_80000000_00000000), then the machine will take an
# underflow exception. Since this is incorrect, we check here to see
# if our emulation, after re-doing the operation, decided that
# no underflow was called for.
        btst            &unfl_bit,FPSR_EXCEPT(%a6)
        beq.w           funfl_chkinex

funfl_unfl_on2:
        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP (fp1) to stack

        mov.w           &0xe003,2+FP_SRC(%a6)   # save exc status

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # do this after fmovm,other f<op>s!

        unlk            %a6

        bra.l           _real_unfl

# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
# we must jump to real_inex().
funfl_inex_on:

# The `060 FPU multiplier hardware is such that if the result of a
# multiply operation is the smallest possible normalized number
# (0x00000000_80000000_00000000), then the machine will take an
# underflow exception.
# But, whether bogus or not, if inexact is enabled AND it occurred,
# then we have to branch to real_inex.

        btst            &inex2_bit,FPSR_EXCEPT(%a6)
        beq.w           funfl_exit

funfl_inex_on2:

        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP to stack

        mov.b           &0xc4,1+EXC_VOFF(%a6)   # vector offset = 0xc4
        mov.w           &0xe001,2+FP_SRC(%a6)   # save exc status

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # do this after fmovm,other f<op>s!

        unlk            %a6

        bra.l           _real_inex

#######################################################################
funfl_out:


#$#     mov.l           FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6)
#$#     mov.l           FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6)
#$#     mov.l           FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6)

# the src operand is definitely a NORM(!), so tag it as such
        mov.b           &NORM,STAG(%a6)         # set src optype tag

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec/mode

        and.l           &0xffff00ff,USER_FPSR(%a6) # zero all but accured field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        lea             FP_SRC(%a6),%a0         # pass ptr to src operand

        bsr.l           fout

        btst            &unfl_bit,FPCR_ENABLE(%a6)
        bne.w           funfl_unfl_on2

        btst            &inex2_bit,FPCR_ENABLE(%a6)
        bne.w           funfl_inex_on2

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
#$#     add.l           &24,%sp

        btst            &0x7,(%sp)              # is trace on?
        beq.l           _fpsp_done              # no

        fmov.l          %fpiar,0x8(%sp)         # "Current PC" is in FPIAR
        mov.w           &0x2024,0x6(%sp)        # stk fmt = 0x2; voff = 0x024
        bra.l           _real_trace

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_unsupp(): 060FPSP entry point for FP "Unimplemented       #
#                       Data Type" exception.                           #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Unimplemented Data Type exception in an operating system.    #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_{word,long}() - read instruction word/longword       #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       set_tag_x() - determine optype of src/dst operands              #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       unnorm_fix() - change UNNORM operands to NORM or ZERO           #
#       load_fpn2() - load dst operand from FP regfile                  #
#       load_fpn1() - load src operand from FP regfile                  #
#       fout() - emulate an opclass 3 instruction                       #
#       tbl_unsupp - add of table of emulation routines for opclass 0,2 #
#       _real_inex() - "callout" to operating system inexact handler    #
#       _fpsp_done() - "callout" for exit; work all done                #
#       _real_trace() - "callout" for Trace enabled exception           #
#       funimp_skew() - adjust fsave src ops to "incorrect" value       #
#       _real_snan() - "callout" for SNAN exception                     #
#       _real_operr() - "callout" for OPERR exception                   #
#       _real_ovfl() - "callout" for OVFL exception                     #
#       _real_unfl() - "callout" for UNFL exception                     #
#       get_packed() - fetch packed operand from memory                 #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the "Unimp Data Type" stk frame     #
#       - The fsave frame contains the ssrc op (for UNNORM/DENORM)      #
#                                                                       #
# OUTPUT ************************************************************** #
#       If Inexact exception (opclass 3):                               #
#       - The system stack is changed to an Inexact exception stk frame #
#       If SNAN exception (opclass 3):                                  #
#       - The system stack is changed to an SNAN exception stk frame    #
#       If OPERR exception (opclass 3):                                 #
#       - The system stack is changed to an OPERR exception stk frame   #
#       If OVFL exception (opclass 3):                                  #
#       - The system stack is changed to an OVFL exception stk frame    #
#       If UNFL exception (opclass 3):                                  #
#       - The system stack is changed to an UNFL exception stack frame  #
#       If Trace exception enabled:                                     #
#       - The system stack is changed to a Trace exception stack frame  #
#       Else: (normal case)                                             #
#       - Correct result has been stored as appropriate                 #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Two main instruction types can enter here: (1) DENORM or UNNORM #
# unimplemented data types. These can be either opclass 0,2 or 3        #
# instructions, and (2) PACKED unimplemented data format instructions   #
# also of opclasses 0,2, or 3.                                          #
#       For UNNORM/DENORM opclass 0 and 2, the handler fetches the src  #
# operand from the fsave state frame and the dst operand (if dyadic)    #
# from the FP register file. The instruction is then emulated by        #
# choosing an emulation routine from a table of routines indexed by     #
# instruction type. Once the instruction has been emulated and result   #
# saved, then we check to see if any enabled exceptions resulted from   #
# instruction emulation. If none, then we exit through the "callout"    #
# _fpsp_done(). If there is an enabled FP exception, then we insert     #
# this exception into the FPU in the fsave state frame and then exit    #
# through _fpsp_done().                                                 #
#       PACKED opclass 0 and 2 is similar in how the instruction is     #
# emulated and exceptions handled. The differences occur in how the     #
# handler loads the packed op (by calling get_packed() routine) and     #
# by the fact that a Trace exception could be pending for PACKED ops.   #
# If a Trace exception is pending, then the current exception stack     #
# frame is changed to a Trace exception stack frame and an exit is      #
# made through _real_trace().                                           #
#       For UNNORM/DENORM opclass 3, the actual move out to memory is   #
# performed by calling the routine fout(). If no exception should occur #
# as the result of emulation, then an exit either occurs through        #
# _fpsp_done() or through _real_trace() if a Trace exception is pending #
# (a Trace stack frame must be created here, too). If an FP exception   #
# should occur, then we must create an exception stack frame of that    #
# type and jump to either _real_snan(), _real_operr(), _real_inex(),    #
# _real_unfl(), or _real_ovfl() as appropriate. PACKED opclass 3        #
# emulation is performed in a similar manner.                           #
#                                                                       #
#########################################################################

#
# (1) DENORM and UNNORM (unimplemented) data types:
#
#                               post-instruction
#                               *****************
#                               *      EA       *
#        pre-instruction        *               *
#       *****************       *****************
#       * 0x0 *  0x0dc  *       * 0x3 *  0x0dc  *
#       *****************       *****************
#       *     Next      *       *     Next      *
#       *      PC       *       *      PC       *
#       *****************       *****************
#       *      SR       *       *      SR       *
#       *****************       *****************
#
# (2) PACKED format (unsupported) opclasses two and three:
#       *****************
#       *      EA       *
#       *               *
#       *****************
#       * 0x2 *  0x0dc  *
#       *****************
#       *     Next      *
#       *      PC       *
#       *****************
#       *      SR       *
#       *****************
#
        global          _fpsp_unsupp
_fpsp_unsupp:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # save fp state

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

        btst            &0x5,EXC_SR(%a6)        # user or supervisor mode?
        bne.b           fu_s
fu_u:
        mov.l           %usp,%a0                # fetch user stack pointer
        mov.l           %a0,EXC_A7(%a6)         # save on stack
        bra.b           fu_cont
# if the exception is an opclass zero or two unimplemented data type
# exception, then the a7' calculated here is wrong since it doesn't
# stack an ea. however, we don't need an a7' for this case anyways.
fu_s:
        lea             0x4+EXC_EA(%a6),%a0     # load old a7'
        mov.l           %a0,EXC_A7(%a6)         # save on stack

fu_cont:

# the FPIAR holds the "current PC" of the faulting instruction
# the FPIAR should be set correctly for ALL exceptions passing through
# this point.
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)     # store OPWORD and EXTWORD

############################

        clr.b           SPCOND_FLG(%a6)         # clear special condition flag

# Separate opclass three (fpn-to-mem) ops since they have a different
# stack frame and protocol.
        btst            &0x5,EXC_CMDREG(%a6)    # is it an fmove out?
        bne.w           fu_out                  # yes

# Separate packed opclass two instructions.
        bfextu          EXC_CMDREG(%a6){&0:&6},%d0
        cmpi.b          %d0,&0x13
        beq.w           fu_in_pack


# I'm not sure at this point what FPSR bits are valid for this instruction.
# so, since the emulation routines re-create them anyways, zero exception field
        andi.l          &0x00ff00ff,USER_FPSR(%a6) # zero exception field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

# Opclass two w/ memory-to-fpn operation will have an incorrect extended
# precision format if the src format was single or double and the
# source data type was an INF, NAN, DENORM, or UNNORM
        lea             FP_SRC(%a6),%a0         # pass ptr to input
        bsr.l           fix_skewed_ops

# we don't know whether the src operand or the dst operand (or both) is the
# UNNORM or DENORM. call the function that tags the operand type. if the
# input is an UNNORM, then convert it to a NORM, DENORM, or ZERO.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           fu_op2                  # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO

fu_op2:
        mov.b           %d0,STAG(%a6)           # save src optype tag

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg

# bit five of the fp extension word separates the monadic and dyadic operations
# at this point
        btst            &0x5,1+EXC_CMDREG(%a6)  # is operation monadic or dyadic?
        beq.b           fu_extract              # monadic
        cmpi.b          1+EXC_CMDREG(%a6),&0x3a # is operation an ftst?
        beq.b           fu_extract              # yes, so it's monadic, too

        bsr.l           load_fpn2               # load dst into FP_DST

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           fu_op2_done             # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO
fu_op2_done:
        mov.b           %d0,DTAG(%a6)           # save dst optype tag

fu_extract:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # fetch rnd mode/prec

        bfextu          1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

        mov.l           (tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

#
# Exceptions in order of precedence:
#       BSUN    : none
#       SNAN    : all dyadic ops
#       OPERR   : fsqrt(-NORM)
#       OVFL    : all except ftst,fcmp
#       UNFL    : all except ftst,fcmp
#       DZ      : fdiv
#       INEX2   : all except ftst,fcmp
#       INEX1   : none (packed doesn't go through here)
#

# we determine the highest priority exception(if any) set by the
# emulation routine that has also been enabled by the user.
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions set
        bne.b           fu_in_ena               # some are enabled

fu_in_cont:
# fcmp and ftst do not store any result.
        mov.b           1+EXC_CMDREG(%a6),%d0   # fetch extension
        andi.b          &0x38,%d0               # extract bits 3-5
        cmpi.b          %d0,&0x38               # is instr fcmp or ftst?
        beq.b           fu_in_exit              # yes

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
        bsr.l           store_fpreg             # store the result

fu_in_exit:

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        bra.l           _fpsp_done

fu_in_ena:
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enabled
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        bne.b           fu_in_exc               # there is at least one set

#
# No exceptions occurred that were also enabled. Now:
#
#       if (OVFL && ovfl_disabled && inexact_enabled) {
#           branch to _real_inex() (even if the result was exact!);
#       } else {
#           save the result in the proper fp reg (unless the op is fcmp or ftst);
#           return;
#       }
#
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
        beq.b           fu_in_cont              # no

fu_in_ovflchk:
        btst            &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
        beq.b           fu_in_cont              # no
        bra.w           fu_in_exc_ovfl          # go insert overflow frame

#
# An exception occurred and that exception was enabled:
#
#       shift enabled exception field into lo byte of d0;
#       if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
#           ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
#               /*
#                * this is the case where we must call _real_inex() now or else
#                * there will be no other way to pass it the exceptional operand
#                */
#               call _real_inex();
#       } else {
#               restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
#       }
#
fu_in_exc:
        subi.l          &24,%d0                 # fix offset to be 0-8
        cmpi.b          %d0,&0x6                # is exception INEX? (6)
        bne.b           fu_in_exc_exit          # no

# the enabled exception was inexact
        btst            &unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
        bne.w           fu_in_exc_unfl          # yes
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
        bne.w           fu_in_exc_ovfl          # yes

# here, we insert the correct fsave status value into the fsave frame for the
# corresponding exception. the operand in the fsave frame should be the original
# src operand.
fu_in_exc_exit:
        mov.l           %d0,-(%sp)              # save d0
        bsr.l           funimp_skew             # skew sgl or dbl inputs
        mov.l           (%sp)+,%d0              # restore d0

        mov.w           (tbl_except.b,%pc,%d0.w*2),2+FP_SRC(%a6) # create exc status

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # restore src op

        unlk            %a6

        bra.l           _fpsp_done

tbl_except:
        short           0xe000,0xe006,0xe004,0xe005
        short           0xe003,0xe002,0xe001,0xe001

fu_in_exc_unfl:
        mov.w           &0x4,%d0
        bra.b           fu_in_exc_exit
fu_in_exc_ovfl:
        mov.w           &0x03,%d0
        bra.b           fu_in_exc_exit

# If the input operand to this operation was opclass two and a single
# or double precision denorm, inf, or nan, the operand needs to be
# "corrected" in order to have the proper equivalent extended precision
# number.
        global          fix_skewed_ops
fix_skewed_ops:
        bfextu          EXC_CMDREG(%a6){&0:&6},%d0 # extract opclass,src fmt
        cmpi.b          %d0,&0x11               # is class = 2 & fmt = sgl?
        beq.b           fso_sgl                 # yes
        cmpi.b          %d0,&0x15               # is class = 2 & fmt = dbl?
        beq.b           fso_dbl                 # yes
        rts                                     # no

fso_sgl:
        mov.w           LOCAL_EX(%a0),%d0       # fetch src exponent
        andi.w          &0x7fff,%d0             # strip sign
        cmpi.w          %d0,&0x3f80             # is |exp| == $3f80?
        beq.b           fso_sgl_dnrm_zero       # yes
        cmpi.w          %d0,&0x407f             # no; is |exp| == $407f?
        beq.b           fso_infnan              # yes
        rts                                     # no

fso_sgl_dnrm_zero:
        andi.l          &0x7fffffff,LOCAL_HI(%a0) # clear j-bit
        beq.b           fso_zero                # it's a skewed zero
fso_sgl_dnrm:
# here, we count on norm not to alter a0...
        bsr.l           norm                    # normalize mantissa
        neg.w           %d0                     # -shft amt
        addi.w          &0x3f81,%d0             # adjust new exponent
        andi.w          &0x8000,LOCAL_EX(%a0)   # clear old exponent
        or.w            %d0,LOCAL_EX(%a0)       # insert new exponent
        rts

fso_zero:
        andi.w          &0x8000,LOCAL_EX(%a0)   # clear bogus exponent
        rts

fso_infnan:
        andi.b          &0x7f,LOCAL_HI(%a0)     # clear j-bit
        ori.w           &0x7fff,LOCAL_EX(%a0)   # make exponent = $7fff
        rts

fso_dbl:
        mov.w           LOCAL_EX(%a0),%d0       # fetch src exponent
        andi.w          &0x7fff,%d0             # strip sign
        cmpi.w          %d0,&0x3c00             # is |exp| == $3c00?
        beq.b           fso_dbl_dnrm_zero       # yes
        cmpi.w          %d0,&0x43ff             # no; is |exp| == $43ff?
        beq.b           fso_infnan              # yes
        rts                                     # no

fso_dbl_dnrm_zero:
        andi.l          &0x7fffffff,LOCAL_HI(%a0) # clear j-bit
        bne.b           fso_dbl_dnrm            # it's a skewed denorm
        tst.l           LOCAL_LO(%a0)           # is it a zero?
        beq.b           fso_zero                # yes
fso_dbl_dnrm:
# here, we count on norm not to alter a0...
        bsr.l           norm                    # normalize mantissa
        neg.w           %d0                     # -shft amt
        addi.w          &0x3c01,%d0             # adjust new exponent
        andi.w          &0x8000,LOCAL_EX(%a0)   # clear old exponent
        or.w            %d0,LOCAL_EX(%a0)       # insert new exponent
        rts

#################################################################

# fmove out took an unimplemented data type exception.
# the src operand is in FP_SRC. Call _fout() to write out the result and
# to determine which exceptions, if any, to take.
fu_out:

# Separate packed move outs from the UNNORM and DENORM move outs.
        bfextu          EXC_CMDREG(%a6){&3:&3},%d0
        cmpi.b          %d0,&0x3
        beq.w           fu_out_pack
        cmpi.b          %d0,&0x7
        beq.w           fu_out_pack


# I'm not sure at this point what FPSR bits are valid for this instruction.
# so, since the emulation routines re-create them anyways, zero exception field.
# fmove out doesn't affect ccodes.
        and.l           &0xffff00ff,USER_FPSR(%a6) # zero exception field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

# the src can ONLY be a DENORM or an UNNORM! so, don't make any big subroutine
# call here. just figure out what it is...
        mov.w           FP_SRC_EX(%a6),%d0      # get exponent
        andi.w          &0x7fff,%d0             # strip sign
        beq.b           fu_out_denorm           # it's a DENORM

        lea             FP_SRC(%a6),%a0
        bsr.l           unnorm_fix              # yes; fix it

        mov.b           %d0,STAG(%a6)

        bra.b           fu_out_cont
fu_out_denorm:
        mov.b           &DENORM,STAG(%a6)
fu_out_cont:

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # fetch rnd mode/prec

        lea             FP_SRC(%a6),%a0         # pass ptr to src operand

        mov.l           (%a6),EXC_A6(%a6)       # in case a6 changes
        bsr.l           fout                    # call fmove out routine

# Exceptions in order of precedence:
#       BSUN    : none
#       SNAN    : none
#       OPERR   : fmove.{b,w,l} out of large UNNORM
#       OVFL    : fmove.{s,d}
#       UNFL    : fmove.{s,d,x}
#       DZ      : none
#       INEX2   : all
#       INEX1   : none (packed doesn't travel through here)

# determine the highest priority exception(if any) set by the
# emulation routine that has also been enabled by the user.
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions enabled
        bne.w           fu_out_ena              # some are enabled

fu_out_done:

        mov.l           EXC_A6(%a6),(%a6)       # in case a6 changed

# on extended precision opclass three instructions using pre-decrement or
# post-increment addressing mode, the address register is not updated. is the
# address register was the stack pointer used from user mode, then let's update
# it here. if it was used from supervisor mode, then we have to handle this
# as a special case.
        btst            &0x5,EXC_SR(%a6)
        bne.b           fu_out_done_s

        mov.l           EXC_A7(%a6),%a0         # restore a7
        mov.l           %a0,%usp

fu_out_done_cont:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        btst            &0x7,(%sp)              # is trace on?
        bne.b           fu_out_trace            # yes

        bra.l           _fpsp_done

# is the ea mode pre-decrement of the stack pointer from supervisor mode?
# ("fmov.x fpm,-(a7)") if so,
fu_out_done_s:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        bne.b           fu_out_done_cont

# the extended precision result is still in fp0. but, we need to save it
# somewhere on the stack until we can copy it to its final resting place.
# here, we're counting on the top of the stack to be the old place-holders
# for fp0/fp1 which have already been restored. that way, we can write
# over those destinations with the shifted stack frame.
        fmovm.x         &0x80,FP_SRC(%a6)       # put answer on stack

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)

# now, copy the result to the proper place on the stack
        mov.l           LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
        mov.l           LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp

        btst            &0x7,(%sp)
        bne.b           fu_out_trace

        bra.l           _fpsp_done

fu_out_ena:
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enabled
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        bne.b           fu_out_exc              # there is at least one set

# no exceptions were set.
# if a disabled overflow occurred and inexact was enabled but the result
# was exact, then a branch to _real_inex() is made.
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
        beq.w           fu_out_done             # no

fu_out_ovflchk:
        btst            &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
        beq.w           fu_out_done             # no
        bra.w           fu_inex                 # yes

#
# The fp move out that took the "Unimplemented Data Type" exception was
# being traced. Since the stack frames are similar, get the "current" PC
# from FPIAR and put it in the trace stack frame then jump to _real_trace().
#
#                 UNSUPP FRAME             TRACE FRAME
#               *****************       *****************
#               *      EA       *       *    Current    *
#               *               *       *      PC       *
#               *****************       *****************
#               * 0x3 *  0x0dc  *       * 0x2 *  0x024  *
#               *****************       *****************
#               *     Next      *       *     Next      *
#               *      PC       *       *      PC       *
#               *****************       *****************
#               *      SR       *       *      SR       *
#               *****************       *****************
#
fu_out_trace:
        mov.w           &0x2024,0x6(%sp)
        fmov.l          %fpiar,0x8(%sp)
        bra.l           _real_trace

# an exception occurred and that exception was enabled.
fu_out_exc:
        subi.l          &24,%d0                 # fix offset to be 0-8

# we don't mess with the existing fsave frame. just re-insert it and
# jump to the "_real_{}()" handler...
        mov.w           (tbl_fu_out.b,%pc,%d0.w*2),%d0
        jmp             (tbl_fu_out.b,%pc,%d0.w*1)

        swbeg           &0x8
tbl_fu_out:
        short           tbl_fu_out      - tbl_fu_out    # BSUN can't happen
        short           tbl_fu_out      - tbl_fu_out    # SNAN can't happen
        short           fu_operr        - tbl_fu_out    # OPERR
        short           fu_ovfl         - tbl_fu_out    # OVFL
        short           fu_unfl         - tbl_fu_out    # UNFL
        short           tbl_fu_out      - tbl_fu_out    # DZ can't happen
        short           fu_inex         - tbl_fu_out    # INEX2
        short           tbl_fu_out      - tbl_fu_out    # INEX1 won't make it here

# for snan,operr,ovfl,unfl, src op is still in FP_SRC so just
# frestore it.
fu_snan:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30d8,EXC_VOFF(%a6)   # vector offset = 0xd8
        mov.w           &0xe006,2+FP_SRC(%a6)

        frestore        FP_SRC(%a6)

        unlk            %a6


        bra.l           _real_snan

fu_operr:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30d0,EXC_VOFF(%a6)   # vector offset = 0xd0
        mov.w           &0xe004,2+FP_SRC(%a6)

        frestore        FP_SRC(%a6)

        unlk            %a6


        bra.l           _real_operr

fu_ovfl:
        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP to the stack

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30d4,EXC_VOFF(%a6)   # vector offset = 0xd4
        mov.w           &0xe005,2+FP_SRC(%a6)

        frestore        FP_SRC(%a6)             # restore EXOP

        unlk            %a6

        bra.l           _real_ovfl

# underflow can happen for extended precision. extended precision opclass
# three instruction exceptions don't update the stack pointer. so, if the
# exception occurred from user mode, then simply update a7 and exit normally.
# if the exception occurred from supervisor mode, check if
fu_unfl:
        mov.l           EXC_A6(%a6),(%a6)       # restore a6

        btst            &0x5,EXC_SR(%a6)
        bne.w           fu_unfl_s

        mov.l           EXC_A7(%a6),%a0         # restore a7 whether we need
        mov.l           %a0,%usp                # to or not...

fu_unfl_cont:
        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP to the stack

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30cc,EXC_VOFF(%a6)   # vector offset = 0xcc
        mov.w           &0xe003,2+FP_SRC(%a6)

        frestore        FP_SRC(%a6)             # restore EXOP

        unlk            %a6

        bra.l           _real_unfl

fu_unfl_s:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg # was the <ea> mode -(sp)?
        bne.b           fu_unfl_cont

# the extended precision result is still in fp0. but, we need to save it
# somewhere on the stack until we can copy it to its final resting place
# (where the exc frame is currently). make sure it's not at the top of the
# frame or it will get overwritten when the exc stack frame is shifted "down".
        fmovm.x         &0x80,FP_SRC(%a6)       # put answer on stack
        fmovm.x         &0x40,FP_DST(%a6)       # put EXOP on stack

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30cc,EXC_VOFF(%a6)   # vector offset = 0xcc
        mov.w           &0xe003,2+FP_DST(%a6)

        frestore        FP_DST(%a6)             # restore EXOP

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)

# now, copy the result to the proper place on the stack
        mov.l           LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
        mov.l           LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp

        bra.l           _real_unfl

# fmove in and out enter here.
fu_inex:
        fmovm.x         &0x40,FP_SRC(%a6)       # save EXOP to the stack

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30c4,EXC_VOFF(%a6)   # vector offset = 0xc4
        mov.w           &0xe001,2+FP_SRC(%a6)

        frestore        FP_SRC(%a6)             # restore EXOP

        unlk            %a6


        bra.l           _real_inex

#########################################################################
#########################################################################
fu_in_pack:


# I'm not sure at this point what FPSR bits are valid for this instruction.
# so, since the emulation routines re-create them anyways, zero exception field
        andi.l          &0x0ff00ff,USER_FPSR(%a6) # zero exception field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        bsr.l           get_packed              # fetch packed src operand

        lea             FP_SRC(%a6),%a0         # pass ptr to src
        bsr.l           set_tag_x               # set src optype tag

        mov.b           %d0,STAG(%a6)           # save src optype tag

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg

# bit five of the fp extension word separates the monadic and dyadic operations
# at this point
        btst            &0x5,1+EXC_CMDREG(%a6)  # is operation monadic or dyadic?
        beq.b           fu_extract_p            # monadic
        cmpi.b          1+EXC_CMDREG(%a6),&0x3a # is operation an ftst?
        beq.b           fu_extract_p            # yes, so it's monadic, too

        bsr.l           load_fpn2               # load dst into FP_DST

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           fu_op2_done_p           # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO
fu_op2_done_p:
        mov.b           %d0,DTAG(%a6)           # save dst optype tag

fu_extract_p:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # fetch rnd mode/prec

        bfextu          1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

        mov.l           (tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

#
# Exceptions in order of precedence:
#       BSUN    : none
#       SNAN    : all dyadic ops
#       OPERR   : fsqrt(-NORM)
#       OVFL    : all except ftst,fcmp
#       UNFL    : all except ftst,fcmp
#       DZ      : fdiv
#       INEX2   : all except ftst,fcmp
#       INEX1   : all
#

# we determine the highest priority exception(if any) set by the
# emulation routine that has also been enabled by the user.
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions enabled
        bne.w           fu_in_ena_p             # some are enabled

fu_in_cont_p:
# fcmp and ftst do not store any result.
        mov.b           1+EXC_CMDREG(%a6),%d0   # fetch extension
        andi.b          &0x38,%d0               # extract bits 3-5
        cmpi.b          %d0,&0x38               # is instr fcmp or ftst?
        beq.b           fu_in_exit_p            # yes

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
        bsr.l           store_fpreg             # store the result

fu_in_exit_p:

        btst            &0x5,EXC_SR(%a6)        # user or supervisor?
        bne.w           fu_in_exit_s_p          # supervisor

        mov.l           EXC_A7(%a6),%a0         # update user a7
        mov.l           %a0,%usp

fu_in_exit_cont_p:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6                     # unravel stack frame

        btst            &0x7,(%sp)              # is trace on?
        bne.w           fu_trace_p              # yes

        bra.l           _fpsp_done              # exit to os

# the exception occurred in supervisor mode. check to see if the
# addressing mode was (a7)+. if so, we'll need to shift the
# stack frame "up".
fu_in_exit_s_p:
        btst            &mia7_bit,SPCOND_FLG(%a6) # was ea mode (a7)+
        beq.b           fu_in_exit_cont_p       # no

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6                     # unravel stack frame

# shift the stack frame "up". we don't really care about the <ea> field.
        mov.l           0x4(%sp),0x10(%sp)
        mov.l           0x0(%sp),0xc(%sp)
        add.l           &0xc,%sp

        btst            &0x7,(%sp)              # is trace on?
        bne.w           fu_trace_p              # yes

        bra.l           _fpsp_done              # exit to os

fu_in_ena_p:
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enabled & set
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        bne.b           fu_in_exc_p             # at least one was set

#
# No exceptions occurred that were also enabled. Now:
#
#       if (OVFL && ovfl_disabled && inexact_enabled) {
#           branch to _real_inex() (even if the result was exact!);
#       } else {
#           save the result in the proper fp reg (unless the op is fcmp or ftst);
#           return;
#       }
#
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set?
        beq.w           fu_in_cont_p            # no

fu_in_ovflchk_p:
        btst            &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled?
        beq.w           fu_in_cont_p            # no
        bra.w           fu_in_exc_ovfl_p        # do _real_inex() now

#
# An exception occurred and that exception was enabled:
#
#       shift enabled exception field into lo byte of d0;
#       if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) ||
#           ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) {
#               /*
#                * this is the case where we must call _real_inex() now or else
#                * there will be no other way to pass it the exceptional operand
#                */
#               call _real_inex();
#       } else {
#               restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU;
#       }
#
fu_in_exc_p:
        subi.l          &24,%d0                 # fix offset to be 0-8
        cmpi.b          %d0,&0x6                # is exception INEX? (6 or 7)
        blt.b           fu_in_exc_exit_p        # no

# the enabled exception was inexact
        btst            &unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur?
        bne.w           fu_in_exc_unfl_p        # yes
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur?
        bne.w           fu_in_exc_ovfl_p        # yes

# here, we insert the correct fsave status value into the fsave frame for the
# corresponding exception. the operand in the fsave frame should be the original
# src operand.
# as a reminder for future predicted pain and agony, we are passing in fsave the
# "non-skewed" operand for cases of sgl and dbl src INFs,NANs, and DENORMs.
# this is INCORRECT for enabled SNAN which would give to the user the skewed SNAN!!!
fu_in_exc_exit_p:
        btst            &0x5,EXC_SR(%a6)        # user or supervisor?
        bne.w           fu_in_exc_exit_s_p      # supervisor

        mov.l           EXC_A7(%a6),%a0         # update user a7
        mov.l           %a0,%usp

fu_in_exc_exit_cont_p:
        mov.w           (tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # restore src op

        unlk            %a6

        btst            &0x7,(%sp)              # is trace enabled?
        bne.w           fu_trace_p              # yes

        bra.l           _fpsp_done

tbl_except_p:
        short           0xe000,0xe006,0xe004,0xe005
        short           0xe003,0xe002,0xe001,0xe001

fu_in_exc_ovfl_p:
        mov.w           &0x3,%d0
        bra.w           fu_in_exc_exit_p

fu_in_exc_unfl_p:
        mov.w           &0x4,%d0
        bra.w           fu_in_exc_exit_p

fu_in_exc_exit_s_p:
        btst            &mia7_bit,SPCOND_FLG(%a6)
        beq.b           fu_in_exc_exit_cont_p

        mov.w           (tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6)

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # restore src op

        unlk            %a6                     # unravel stack frame

# shift stack frame "up". who cares about <ea> field.
        mov.l           0x4(%sp),0x10(%sp)
        mov.l           0x0(%sp),0xc(%sp)
        add.l           &0xc,%sp

        btst            &0x7,(%sp)              # is trace on?
        bne.b           fu_trace_p              # yes

        bra.l           _fpsp_done              # exit to os

#
# The opclass two PACKED instruction that took an "Unimplemented Data Type"
# exception was being traced. Make the "current" PC the FPIAR and put it in the
# trace stack frame then jump to _real_trace().
#
#                 UNSUPP FRAME             TRACE FRAME
#               *****************       *****************
#               *      EA       *       *    Current    *
#               *               *       *      PC       *
#               *****************       *****************
#               * 0x2 * 0x0dc   *       * 0x2 *  0x024  *
#               *****************       *****************
#               *     Next      *       *     Next      *
#               *      PC       *       *      PC       *
#               *****************       *****************
#               *      SR       *       *      SR       *
#               *****************       *****************
fu_trace_p:
        mov.w           &0x2024,0x6(%sp)
        fmov.l          %fpiar,0x8(%sp)

        bra.l           _real_trace

#########################################################
#########################################################
fu_out_pack:


# I'm not sure at this point what FPSR bits are valid for this instruction.
# so, since the emulation routines re-create them anyways, zero exception field.
# fmove out doesn't affect ccodes.
        and.l           &0xffff00ff,USER_FPSR(%a6) # zero exception field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0
        bsr.l           load_fpn1

# unlike other opclass 3, unimplemented data type exceptions, packed must be
# able to detect all operand types.
        lea             FP_SRC(%a6),%a0
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           fu_op2_p                # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO

fu_op2_p:
        mov.b           %d0,STAG(%a6)           # save src optype tag

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # fetch rnd mode/prec

        lea             FP_SRC(%a6),%a0         # pass ptr to src operand

        mov.l           (%a6),EXC_A6(%a6)       # in case a6 changes
        bsr.l           fout                    # call fmove out routine

# Exceptions in order of precedence:
#       BSUN    : no
#       SNAN    : yes
#       OPERR   : if ((k_factor > +17) || (dec. exp exceeds 3 digits))
#       OVFL    : no
#       UNFL    : no
#       DZ      : no
#       INEX2   : yes
#       INEX1   : no

# determine the highest priority exception(if any) set by the
# emulation routine that has also been enabled by the user.
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions enabled
        bne.w           fu_out_ena_p            # some are enabled

fu_out_exit_p:
        mov.l           EXC_A6(%a6),(%a6)       # restore a6

        btst            &0x5,EXC_SR(%a6)        # user or supervisor?
        bne.b           fu_out_exit_s_p         # supervisor

        mov.l           EXC_A7(%a6),%a0         # update user a7
        mov.l           %a0,%usp

fu_out_exit_cont_p:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6                     # unravel stack frame

        btst            &0x7,(%sp)              # is trace on?
        bne.w           fu_trace_p              # yes

        bra.l           _fpsp_done              # exit to os

# the exception occurred in supervisor mode. check to see if the
# addressing mode was -(a7). if so, we'll need to shift the
# stack frame "down".
fu_out_exit_s_p:
        btst            &mda7_bit,SPCOND_FLG(%a6) # was ea mode -(a7)
        beq.b           fu_out_exit_cont_p      # no

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)

# now, copy the result to the proper place on the stack
        mov.l           LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp)
        mov.l           LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp

        btst            &0x7,(%sp)
        bne.w           fu_trace_p

        bra.l           _fpsp_done

fu_out_ena_p:
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enabled
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        beq.w           fu_out_exit_p

        mov.l           EXC_A6(%a6),(%a6)       # restore a6

# an exception occurred and that exception was enabled.
# the only exception possible on packed move out are INEX, OPERR, and SNAN.
fu_out_exc_p:
        cmpi.b          %d0,&0x1a
        bgt.w           fu_inex_p2
        beq.w           fu_operr_p

fu_snan_p:
        btst            &0x5,EXC_SR(%a6)
        bne.b           fu_snan_s_p

        mov.l           EXC_A7(%a6),%a0
        mov.l           %a0,%usp
        bra.w           fu_snan

fu_snan_s_p:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        bne.w           fu_snan

# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
# the strategy is to move the exception frame "down" 12 bytes. then, we
# can store the default result where the exception frame was.
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30d8,EXC_VOFF(%a6)   # vector offset = 0xd0
        mov.w           &0xe006,2+FP_SRC(%a6)   # set fsave status

        frestore        FP_SRC(%a6)             # restore src operand

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)

# now, we copy the default result to its proper location
        mov.l           LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
        mov.l           LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp


        bra.l           _real_snan

fu_operr_p:
        btst            &0x5,EXC_SR(%a6)
        bne.w           fu_operr_p_s

        mov.l           EXC_A7(%a6),%a0
        mov.l           %a0,%usp
        bra.w           fu_operr

fu_operr_p_s:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        bne.w           fu_operr

# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
# the strategy is to move the exception frame "down" 12 bytes. then, we
# can store the default result where the exception frame was.
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30d0,EXC_VOFF(%a6)   # vector offset = 0xd0
        mov.w           &0xe004,2+FP_SRC(%a6)   # set fsave status

        frestore        FP_SRC(%a6)             # restore src operand

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)

# now, we copy the default result to its proper location
        mov.l           LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
        mov.l           LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp


        bra.l           _real_operr

fu_inex_p2:
        btst            &0x5,EXC_SR(%a6)
        bne.w           fu_inex_s_p2

        mov.l           EXC_A7(%a6),%a0
        mov.l           %a0,%usp
        bra.w           fu_inex

fu_inex_s_p2:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        bne.w           fu_inex

# the instruction was "fmove.p fpn,-(a7)" from supervisor mode.
# the strategy is to move the exception frame "down" 12 bytes. then, we
# can store the default result where the exception frame was.
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0/fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.w           &0x30c4,EXC_VOFF(%a6)   # vector offset = 0xc4
        mov.w           &0xe001,2+FP_SRC(%a6)   # set fsave status

        frestore        FP_SRC(%a6)             # restore src operand

        mov.l           (%a6),%a6               # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)

# now, we copy the default result to its proper location
        mov.l           LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp)
        mov.l           LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp)
        mov.l           LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp


        bra.l           _real_inex

#########################################################################

#
# if we're stuffing a source operand back into an fsave frame then we
# have to make sure that for single or double source operands that the
# format stuffed is as weird as the hardware usually makes it.
#
        global          funimp_skew
funimp_skew:
        bfextu          EXC_EXTWORD(%a6){&3:&3},%d0 # extract src specifier
        cmpi.b          %d0,&0x1                # was src sgl?
        beq.b           funimp_skew_sgl         # yes
        cmpi.b          %d0,&0x5                # was src dbl?
        beq.b           funimp_skew_dbl         # yes
        rts

funimp_skew_sgl:
        mov.w           FP_SRC_EX(%a6),%d0      # fetch DENORM exponent
        andi.w          &0x7fff,%d0             # strip sign
        beq.b           funimp_skew_sgl_not
        cmpi.w          %d0,&0x3f80
        bgt.b           funimp_skew_sgl_not
        neg.w           %d0                     # make exponent negative
        addi.w          &0x3f81,%d0             # find amt to shift
        mov.l           FP_SRC_HI(%a6),%d1      # fetch DENORM hi(man)
        lsr.l           %d0,%d1                 # shift it
        bset            &31,%d1                 # set j-bit
        mov.l           %d1,FP_SRC_HI(%a6)      # insert new hi(man)
        andi.w          &0x8000,FP_SRC_EX(%a6)  # clear old exponent
        ori.w           &0x3f80,FP_SRC_EX(%a6)  # insert new "skewed" exponent
funimp_skew_sgl_not:
        rts

funimp_skew_dbl:
        mov.w           FP_SRC_EX(%a6),%d0      # fetch DENORM exponent
        andi.w          &0x7fff,%d0             # strip sign
        beq.b           funimp_skew_dbl_not
        cmpi.w          %d0,&0x3c00
        bgt.b           funimp_skew_dbl_not

        tst.b           FP_SRC_EX(%a6)          # make "internal format"
        smi.b           0x2+FP_SRC(%a6)
        mov.w           %d0,FP_SRC_EX(%a6)      # insert exponent with cleared sign
        clr.l           %d0                     # clear g,r,s
        lea             FP_SRC(%a6),%a0         # pass ptr to src op
        mov.w           &0x3c01,%d1             # pass denorm threshold
        bsr.l           dnrm_lp                 # denorm it
        mov.w           &0x3c00,%d0             # new exponent
        tst.b           0x2+FP_SRC(%a6)         # is sign set?
        beq.b           fss_dbl_denorm_done     # no
        bset            &15,%d0                 # set sign
fss_dbl_denorm_done:
        bset            &0x7,FP_SRC_HI(%a6)     # set j-bit
        mov.w           %d0,FP_SRC_EX(%a6)      # insert new exponent
funimp_skew_dbl_not:
        rts

#########################################################################
        global          _mem_write2
_mem_write2:
        btst            &0x5,EXC_SR(%a6)
        beq.l           _dmem_write
        mov.l           0x0(%a0),FP_DST_EX(%a6)
        mov.l           0x4(%a0),FP_DST_HI(%a6)
        mov.l           0x8(%a0),FP_DST_LO(%a6)
        clr.l           %d1
        rts

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_effadd(): 060FPSP entry point for FP "Unimplemented       #
#                       effective address" exception.                   #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Unimplemented Effective Address exception in an operating    #
#       system.                                                         #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       set_tag_x() - determine optype of src/dst operands              #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       unnorm_fix() - change UNNORM operands to NORM or ZERO           #
#       load_fpn2() - load dst operand from FP regfile                  #
#       tbl_unsupp - add of table of emulation routines for opclass 0,2 #
#       decbin() - convert packed data to FP binary data                #
#       _real_fpu_disabled() - "callout" for "FPU disabled" exception   #
#       _real_access() - "callout" for access error exception           #
#       _mem_read() - read extended immediate operand from memory       #
#       _fpsp_done() - "callout" for exit; work all done                #
#       _real_trace() - "callout" for Trace enabled exception           #
#       fmovm_dynamic() - emulate dynamic fmovm instruction             #
#       fmovm_ctrl() - emulate fmovm control instruction                #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the "Unimplemented <ea>" stk frame  #
#                                                                       #
# OUTPUT ************************************************************** #
#       If access error:                                                #
#       - The system stack is changed to an access error stack frame    #
#       If FPU disabled:                                                #
#       - The system stack is changed to an FPU disabled stack frame    #
#       If Trace exception enabled:                                     #
#       - The system stack is changed to a Trace exception stack frame  #
#       Else: (normal case)                                             #
#       - None (correct result has been stored as appropriate)          #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This exception handles 3 types of operations:                   #
# (1) FP Instructions using extended precision or packed immediate      #
#     addressing mode.                                                  #
# (2) The "fmovm.x" instruction w/ dynamic register specification.      #
# (3) The "fmovm.l" instruction w/ 2 or 3 control registers.            #
#                                                                       #
#       For immediate data operations, the data is read in w/ a         #
# _mem_read() "callout", converted to FP binary (if packed), and used   #
# as the source operand to the instruction specified by the instruction #
# word. If no FP exception should be reported ads a result of the       #
# emulation, then the result is stored to the destination register and  #
# the handler exits through _fpsp_done(). If an enabled exc has been    #
# signalled as a result of emulation, then an fsave state frame         #
# corresponding to the FP exception type must be entered into the 060   #
# FPU before exiting. In either the enabled or disabled cases, we       #
# must also check if a Trace exception is pending, in which case, we    #
# must create a Trace exception stack frame from the current exception  #
# stack frame. If no Trace is pending, we simply exit through           #
# _fpsp_done().                                                         #
#       For "fmovm.x", call the routine fmovm_dynamic() which will      #
# decode and emulate the instruction. No FP exceptions can be pending   #
# as a result of this operation emulation. A Trace exception can be     #
# pending, though, which means the current stack frame must be changed  #
# to a Trace stack frame and an exit made through _real_trace().        #
# For the case of "fmovm.x Dn,-(a7)", where the offending instruction   #
# was executed from supervisor mode, this handler must store the FP     #
# register file values to the system stack by itself since              #
# fmovm_dynamic() can't handle this. A normal exit is made through      #
# fpsp_done().                                                          #
#       For "fmovm.l", fmovm_ctrl() is used to emulate the instruction. #
# Again, a Trace exception may be pending and an exit made through      #
# _real_trace(). Else, a normal exit is made through _fpsp_done().      #
#                                                                       #
#       Before any of the above is attempted, it must be checked to     #
# see if the FPU is disabled. Since the "Unimp <ea>" exception is taken #
# before the "FPU disabled" exception, but the "FPU disabled" exception #
# has higher priority, we check the disabled bit in the PCR. If set,    #
# then we must create an 8 word "FPU disabled" exception stack frame    #
# from the current 4 word exception stack frame. This includes          #
# reproducing the effective address of the instruction to put on the    #
# new stack frame.                                                      #
#                                                                       #
#       In the process of all emulation work, if a _mem_read()          #
# "callout" returns a failing result indicating an access error, then   #
# we must create an access error stack frame from the current stack     #
# frame. This information includes a faulting address and a fault-      #
# status-longword. These are created within this handler.               #
#                                                                       #
#########################################################################

        global          _fpsp_effadd
_fpsp_effadd:

# This exception type takes priority over the "Line F Emulator"
# exception. Therefore, the FPU could be disabled when entering here.
# So, we must check to see if it's disabled and handle that case separately.
        mov.l           %d0,-(%sp)              # save d0
        movc            %pcr,%d0                # load proc cr
        btst            &0x1,%d0                # is FPU disabled?
        bne.w           iea_disabled            # yes
        mov.l           (%sp)+,%d0              # restore d0

        link            %a6,&-LOCAL_SIZE        # init stack frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# PC of instruction that took the exception is the PC in the frame
        mov.l           EXC_PC(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)     # store OPWORD and EXTWORD

#########################################################################

        tst.w           %d0                     # is operation fmovem?
        bmi.w           iea_fmovm               # yes

#
# here, we will have:
#       fabs    fdabs   fsabs           facos           fmod
#       fadd    fdadd   fsadd           fasin           frem
#       fcmp                            fatan           fscale
#       fdiv    fddiv   fsdiv           fatanh          fsin
#       fint                            fcos            fsincos
#       fintrz                          fcosh           fsinh
#       fmove   fdmove  fsmove          fetox           ftan
#       fmul    fdmul   fsmul           fetoxm1         ftanh
#       fneg    fdneg   fsneg           fgetexp         ftentox
#       fsgldiv                         fgetman         ftwotox
#       fsglmul                         flog10
#       fsqrt                           flog2
#       fsub    fdsub   fssub           flogn
#       ftst                            flognp1
# which can all use f<op>.{x,p}
# so, now it's immediate data extended precision AND PACKED FORMAT!
#
iea_op:
        andi.l          &0x00ff00ff,USER_FPSR(%a6)

        btst            &0xa,%d0                # is src fmt x or p?
        bne.b           iea_op_pack             # packed


        mov.l           EXC_EXTWPTR(%a6),%a0    # pass: ptr to #<data>
        lea             FP_SRC(%a6),%a1         # pass: ptr to super addr
        mov.l           &0xc,%d0                # pass: 12 bytes
        bsr.l           _imem_read              # read extended immediate

        tst.l           %d1                     # did ifetch fail?
        bne.w           iea_iacc                # yes

        bra.b           iea_op_setsrc

iea_op_pack:

        mov.l           EXC_EXTWPTR(%a6),%a0    # pass: ptr to #<data>
        lea             FP_SRC(%a6),%a1         # pass: ptr to super dst
        mov.l           &0xc,%d0                # pass: 12 bytes
        bsr.l           _imem_read              # read packed operand

        tst.l           %d1                     # did ifetch fail?
        bne.w           iea_iacc                # yes

# The packed operand is an INF or a NAN if the exponent field is all ones.
        bfextu          FP_SRC(%a6){&1:&15},%d0 # get exp
        cmpi.w          %d0,&0x7fff             # INF or NAN?
        beq.b           iea_op_setsrc           # operand is an INF or NAN

# The packed operand is a zero if the mantissa is all zero, else it's
# a normal packed op.
        mov.b           3+FP_SRC(%a6),%d0       # get byte 4
        andi.b          &0x0f,%d0               # clear all but last nybble
        bne.b           iea_op_gp_not_spec      # not a zero
        tst.l           FP_SRC_HI(%a6)          # is lw 2 zero?
        bne.b           iea_op_gp_not_spec      # not a zero
        tst.l           FP_SRC_LO(%a6)          # is lw 3 zero?
        beq.b           iea_op_setsrc           # operand is a ZERO
iea_op_gp_not_spec:
        lea             FP_SRC(%a6),%a0         # pass: ptr to packed op
        bsr.l           decbin                  # convert to extended
        fmovm.x         &0x80,FP_SRC(%a6)       # make this the srcop

iea_op_setsrc:
        addi.l          &0xc,EXC_EXTWPTR(%a6)   # update extension word pointer

# FP_SRC now holds the src operand.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           set_tag_x               # tag the operand type
        mov.b           %d0,STAG(%a6)           # could be ANYTHING!!!
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           iea_op_getdst           # no
        bsr.l           unnorm_fix              # yes; convert to NORM/DENORM/ZERO
        mov.b           %d0,STAG(%a6)           # set new optype tag
iea_op_getdst:
        clr.b           STORE_FLG(%a6)          # clear "store result" boolean

        btst            &0x5,1+EXC_CMDREG(%a6)  # is operation monadic or dyadic?
        beq.b           iea_op_extract          # monadic
        btst            &0x4,1+EXC_CMDREG(%a6)  # is operation fsincos,ftst,fcmp?
        bne.b           iea_op_spec             # yes

iea_op_loaddst:
        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
        bsr.l           load_fpn2               # load dst operand

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        mov.b           %d0,DTAG(%a6)           # could be ANYTHING!!!
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           iea_op_extract          # no
        bsr.l           unnorm_fix              # yes; convert to NORM/DENORM/ZERO
        mov.b           %d0,DTAG(%a6)           # set new optype tag
        bra.b           iea_op_extract

# the operation is fsincos, ftst, or fcmp. only fcmp is dyadic
iea_op_spec:
        btst            &0x3,1+EXC_CMDREG(%a6)  # is operation fsincos?
        beq.b           iea_op_extract          # yes
# now, we're left with ftst and fcmp. so, first let's tag them so that they don't
# store a result. then, only fcmp will branch back and pick up a dst operand.
        st              STORE_FLG(%a6)          # don't store a final result
        btst            &0x1,1+EXC_CMDREG(%a6)  # is operation fcmp?
        beq.b           iea_op_loaddst          # yes

iea_op_extract:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass: rnd mode,prec

        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.w          &0x007f,%d1             # extract extension

        fmov.l          &0x0,%fpcr
        fmov.l          &0x0,%fpsr

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

        mov.l           (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

#
# Exceptions in order of precedence:
#       BSUN    : none
#       SNAN    : all operations
#       OPERR   : all reg-reg or mem-reg operations that can normally operr
#       OVFL    : same as OPERR
#       UNFL    : same as OPERR
#       DZ      : same as OPERR
#       INEX2   : same as OPERR
#       INEX1   : all packed immediate operations
#

# we determine the highest priority exception(if any) set by the
# emulation routine that has also been enabled by the user.
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions enabled
        bne.b           iea_op_ena              # some are enabled

# now, we save the result, unless, of course, the operation was ftst or fcmp.
# these don't save results.
iea_op_save:
        tst.b           STORE_FLG(%a6)          # does this op store a result?
        bne.b           iea_op_exit1            # exit with no frestore

iea_op_store:
        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno
        bsr.l           store_fpreg             # store the result

iea_op_exit1:
        mov.l           EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
        mov.l           EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6                     # unravel the frame

        btst            &0x7,(%sp)              # is trace on?
        bne.w           iea_op_trace            # yes

        bra.l           _fpsp_done              # exit to os

iea_op_ena:
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enable and set
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        bne.b           iea_op_exc              # at least one was set

# no exception occurred. now, did a disabled, exact overflow occur with inexact
# enabled? if so, then we have to stuff an overflow frame into the FPU.
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
        beq.b           iea_op_save

iea_op_ovfl:
        btst            &inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
        beq.b           iea_op_store            # no
        bra.b           iea_op_exc_ovfl         # yes

# an enabled exception occurred. we have to insert the exception type back into
# the machine.
iea_op_exc:
        subi.l          &24,%d0                 # fix offset to be 0-8
        cmpi.b          %d0,&0x6                # is exception INEX?
        bne.b           iea_op_exc_force        # no

# the enabled exception was inexact. so, if it occurs with an overflow
# or underflow that was disabled, then we have to force an overflow or
# underflow frame.
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
        bne.b           iea_op_exc_ovfl         # yes
        btst            &unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur?
        bne.b           iea_op_exc_unfl         # yes

iea_op_exc_force:
        mov.w           (tbl_iea_except.b,%pc,%d0.w*2),2+FP_SRC(%a6)
        bra.b           iea_op_exit2            # exit with frestore

tbl_iea_except:
        short           0xe002, 0xe006, 0xe004, 0xe005
        short           0xe003, 0xe002, 0xe001, 0xe001

iea_op_exc_ovfl:
        mov.w           &0xe005,2+FP_SRC(%a6)
        bra.b           iea_op_exit2

iea_op_exc_unfl:
        mov.w           &0xe003,2+FP_SRC(%a6)

iea_op_exit2:
        mov.l           EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC"
        mov.l           EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # restore exceptional state

        unlk            %a6                     # unravel the frame

        btst            &0x7,(%sp)              # is trace on?
        bne.b           iea_op_trace            # yes

        bra.l           _fpsp_done              # exit to os

#
# The opclass two instruction that took an "Unimplemented Effective Address"
# exception was being traced. Make the "current" PC the FPIAR and put it in
# the trace stack frame then jump to _real_trace().
#
#                UNIMP EA FRAME            TRACE FRAME
#               *****************       *****************
#               * 0x0 *  0x0f0  *       *    Current    *
#               *****************       *      PC       *
#               *    Current    *       *****************
#               *      PC       *       * 0x2 *  0x024  *
#               *****************       *****************
#               *      SR       *       *     Next      *
#               *****************       *      PC       *
#                                       *****************
#                                       *      SR       *
#                                       *****************
iea_op_trace:
        mov.l           (%sp),-(%sp)            # shift stack frame "down"
        mov.w           0x8(%sp),0x4(%sp)
        mov.w           &0x2024,0x6(%sp)        # stk fmt = 0x2; voff = 0x024
        fmov.l          %fpiar,0x8(%sp)         # "Current PC" is in FPIAR

        bra.l           _real_trace

#########################################################################
iea_fmovm:
        btst            &14,%d0                 # ctrl or data reg
        beq.w           iea_fmovm_ctrl

iea_fmovm_data:

        btst            &0x5,EXC_SR(%a6)        # user or supervisor mode
        bne.b           iea_fmovm_data_s

iea_fmovm_data_u:
        mov.l           %usp,%a0
        mov.l           %a0,EXC_A7(%a6)         # store current a7
        bsr.l           fmovm_dynamic           # do dynamic fmovm
        mov.l           EXC_A7(%a6),%a0         # load possibly new a7
        mov.l           %a0,%usp                # update usp
        bra.w           iea_fmovm_exit

iea_fmovm_data_s:
        clr.b           SPCOND_FLG(%a6)
        lea             0x2+EXC_VOFF(%a6),%a0
        mov.l           %a0,EXC_A7(%a6)
        bsr.l           fmovm_dynamic           # do dynamic fmovm

        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        beq.w           iea_fmovm_data_predec
        cmpi.b          SPCOND_FLG(%a6),&mia7_flg
        bne.w           iea_fmovm_exit

# right now, d0 = the size.
# the data has been fetched from the supervisor stack, but we have not
# incremented the stack pointer by the appropriate number of bytes.
# do it here.
iea_fmovm_data_postinc:
        btst            &0x7,EXC_SR(%a6)
        bne.b           iea_fmovm_data_pi_trace

        mov.w           EXC_SR(%a6),(EXC_SR,%a6,%d0)
        mov.l           EXC_EXTWPTR(%a6),(EXC_PC,%a6,%d0)
        mov.w           &0x00f0,(EXC_VOFF,%a6,%d0)

        lea             (EXC_SR,%a6,%d0),%a0
        mov.l           %a0,EXC_SR(%a6)

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
        mov.l           (%sp)+,%sp
        bra.l           _fpsp_done

iea_fmovm_data_pi_trace:
        mov.w           EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
        mov.l           EXC_EXTWPTR(%a6),(EXC_PC-0x4,%a6,%d0)
        mov.w           &0x2024,(EXC_VOFF-0x4,%a6,%d0)
        mov.l           EXC_PC(%a6),(EXC_VOFF+0x2-0x4,%a6,%d0)

        lea             (EXC_SR-0x4,%a6,%d0),%a0
        mov.l           %a0,EXC_SR(%a6)

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
        mov.l           (%sp)+,%sp
        bra.l           _real_trace

# right now, d1 = size and d0 = the strg.
iea_fmovm_data_predec:
        mov.b           %d1,EXC_VOFF(%a6)       # store strg
        mov.b           %d0,0x1+EXC_VOFF(%a6)   # store size

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        mov.l           (%a6),-(%sp)            # make a copy of a6
        mov.l           %d0,-(%sp)              # save d0
        mov.l           %d1,-(%sp)              # save d1
        mov.l           EXC_EXTWPTR(%a6),-(%sp) # make a copy of Next PC

        clr.l           %d0
        mov.b           0x1+EXC_VOFF(%a6),%d0   # fetch size
        neg.l           %d0                     # get negative of size

        btst            &0x7,EXC_SR(%a6)        # is trace enabled?
        beq.b           iea_fmovm_data_p2

        mov.w           EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0)
        mov.l           EXC_PC(%a6),(EXC_VOFF-0x2,%a6,%d0)
        mov.l           (%sp)+,(EXC_PC-0x4,%a6,%d0)
        mov.w           &0x2024,(EXC_VOFF-0x4,%a6,%d0)

        pea             (%a6,%d0)               # create final sp
        bra.b           iea_fmovm_data_p3

iea_fmovm_data_p2:
        mov.w           EXC_SR(%a6),(EXC_SR,%a6,%d0)
        mov.l           (%sp)+,(EXC_PC,%a6,%d0)
        mov.w           &0x00f0,(EXC_VOFF,%a6,%d0)

        pea             (0x4,%a6,%d0)           # create final sp

iea_fmovm_data_p3:
        clr.l           %d1
        mov.b           EXC_VOFF(%a6),%d1       # fetch strg

        tst.b           %d1
        bpl.b           fm_1
        fmovm.x         &0x80,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_1:
        lsl.b           &0x1,%d1
        bpl.b           fm_2
        fmovm.x         &0x40,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_2:
        lsl.b           &0x1,%d1
        bpl.b           fm_3
        fmovm.x         &0x20,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_3:
        lsl.b           &0x1,%d1
        bpl.b           fm_4
        fmovm.x         &0x10,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_4:
        lsl.b           &0x1,%d1
        bpl.b           fm_5
        fmovm.x         &0x08,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_5:
        lsl.b           &0x1,%d1
        bpl.b           fm_6
        fmovm.x         &0x04,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_6:
        lsl.b           &0x1,%d1
        bpl.b           fm_7
        fmovm.x         &0x02,(0x4+0x8,%a6,%d0)
        addi.l          &0xc,%d0
fm_7:
        lsl.b           &0x1,%d1
        bpl.b           fm_end
        fmovm.x         &0x01,(0x4+0x8,%a6,%d0)
fm_end:
        mov.l           0x4(%sp),%d1
        mov.l           0x8(%sp),%d0
        mov.l           0xc(%sp),%a6
        mov.l           (%sp)+,%sp

        btst            &0x7,(%sp)              # is trace enabled?
        beq.l           _fpsp_done
        bra.l           _real_trace

#########################################################################
iea_fmovm_ctrl:

        bsr.l           fmovm_ctrl              # load ctrl regs

iea_fmovm_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        btst            &0x7,EXC_SR(%a6)        # is trace on?
        bne.b           iea_fmovm_trace         # yes

        mov.l           EXC_EXTWPTR(%a6),EXC_PC(%a6) # set Next PC

        unlk            %a6                     # unravel the frame

        bra.l           _fpsp_done              # exit to os

#
# The control reg instruction that took an "Unimplemented Effective Address"
# exception was being traced. The "Current PC" for the trace frame is the
# PC stacked for Unimp EA. The "Next PC" is in EXC_EXTWPTR.
# After fixing the stack frame, jump to _real_trace().
#
#                UNIMP EA FRAME            TRACE FRAME
#               *****************       *****************
#               * 0x0 *  0x0f0  *       *    Current    *
#               *****************       *      PC       *
#               *    Current    *       *****************
#               *      PC       *       * 0x2 *  0x024  *
#               *****************       *****************
#               *      SR       *       *     Next      *
#               *****************       *      PC       *
#                                       *****************
#                                       *      SR       *
#                                       *****************
# this ain't a pretty solution, but it works:
# -restore a6 (not with unlk)
# -shift stack frame down over where old a6 used to be
# -add LOCAL_SIZE to stack pointer
iea_fmovm_trace:
        mov.l           (%a6),%a6               # restore frame pointer
        mov.w           EXC_SR+LOCAL_SIZE(%sp),0x0+LOCAL_SIZE(%sp)
        mov.l           EXC_PC+LOCAL_SIZE(%sp),0x8+LOCAL_SIZE(%sp)
        mov.l           EXC_EXTWPTR+LOCAL_SIZE(%sp),0x2+LOCAL_SIZE(%sp)
        mov.w           &0x2024,0x6+LOCAL_SIZE(%sp) # stk fmt = 0x2; voff = 0x024
        add.l           &LOCAL_SIZE,%sp         # clear stack frame

        bra.l           _real_trace

#########################################################################
# The FPU is disabled and so we should really have taken the "Line
# F Emulator" exception. So, here we create an 8-word stack frame
# from our 4-word stack frame. This means we must calculate the length
# the faulting instruction to get the "next PC". This is trivial for
# immediate operands but requires some extra work for fmovm dynamic
# which can use most addressing modes.
iea_disabled:
        mov.l           (%sp)+,%d0              # restore d0

        link            %a6,&-LOCAL_SIZE        # init stack frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1

# PC of instruction that took the exception is the PC in the frame
        mov.l           EXC_PC(%a6),EXC_EXTWPTR(%a6)
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)     # store OPWORD and EXTWORD

        tst.w           %d0                     # is instr fmovm?
        bmi.b           iea_dis_fmovm           # yes
# instruction is using an extended precision immediate operand. therefore,
# the total instruction length is 16 bytes.
iea_dis_immed:
        mov.l           &0x10,%d0               # 16 bytes of instruction
        bra.b           iea_dis_cont
iea_dis_fmovm:
        btst            &0xe,%d0                # is instr fmovm ctrl
        bne.b           iea_dis_fmovm_data      # no
# the instruction is a fmovm.l with 2 or 3 registers.
        bfextu          %d0{&19:&3},%d1
        mov.l           &0xc,%d0
        cmpi.b          %d1,&0x7                # move all regs?
        bne.b           iea_dis_cont
        addq.l          &0x4,%d0
        bra.b           iea_dis_cont
# the instruction is an fmovm.x dynamic which can use many addressing
# modes and thus can have several different total instruction lengths.
# call fmovm_calc_ea which will go through the ea calc process and,
# as a by-product, will tell us how long the instruction is.
iea_dis_fmovm_data:
        clr.l           %d0
        bsr.l           fmovm_calc_ea
        mov.l           EXC_EXTWPTR(%a6),%d0
        sub.l           EXC_PC(%a6),%d0
iea_dis_cont:
        mov.w           %d0,EXC_VOFF(%a6)       # store stack shift value

        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

# here, we actually create the 8-word frame from the 4-word frame,
# with the "next PC" as additional info.
# the <ea> field is let as undefined.
        subq.l          &0x8,%sp                # make room for new stack
        mov.l           %d0,-(%sp)              # save d0
        mov.w           0xc(%sp),0x4(%sp)       # move SR
        mov.l           0xe(%sp),0x6(%sp)       # move Current PC
        clr.l           %d0
        mov.w           0x12(%sp),%d0
        mov.l           0x6(%sp),0x10(%sp)      # move Current PC
        add.l           %d0,0x6(%sp)            # make Next PC
        mov.w           &0x402c,0xa(%sp)        # insert offset,frame format
        mov.l           (%sp)+,%d0              # restore d0

        bra.l           _real_fpu_disabled

##########

iea_iacc:
        movc            %pcr,%d0
        btst            &0x1,%d0
        bne.b           iea_iacc_cont
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1 on stack
iea_iacc_cont:
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        subq.w          &0x8,%sp                # make stack frame bigger
        mov.l           0x8(%sp),(%sp)          # store SR,hi(PC)
        mov.w           0xc(%sp),0x4(%sp)       # store lo(PC)
        mov.w           &0x4008,0x6(%sp)        # store voff
        mov.l           0x2(%sp),0x8(%sp)       # store ea
        mov.l           &0x09428001,0xc(%sp)    # store fslw

iea_acc_done:
        btst            &0x5,(%sp)              # user or supervisor mode?
        beq.b           iea_acc_done2           # user
        bset            &0x2,0xd(%sp)           # set supervisor TM bit

iea_acc_done2:
        bra.l           _real_access

iea_dacc:
        lea             -LOCAL_SIZE(%a6),%sp

        movc            %pcr,%d1
        btst            &0x1,%d1
        bne.b           iea_dacc_cont
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1 on stack
        fmovm.l         LOCAL_SIZE+USER_FPCR(%sp),%fpcr,%fpsr,%fpiar # restore ctrl regs
iea_dacc_cont:
        mov.l           (%a6),%a6

        mov.l           0x4+LOCAL_SIZE(%sp),-0x8+0x4+LOCAL_SIZE(%sp)
        mov.w           0x8+LOCAL_SIZE(%sp),-0x8+0x8+LOCAL_SIZE(%sp)
        mov.w           &0x4008,-0x8+0xa+LOCAL_SIZE(%sp)
        mov.l           %a0,-0x8+0xc+LOCAL_SIZE(%sp)
        mov.w           %d0,-0x8+0x10+LOCAL_SIZE(%sp)
        mov.w           &0x0001,-0x8+0x12+LOCAL_SIZE(%sp)

        movm.l          LOCAL_SIZE+EXC_DREGS(%sp),&0x0303 # restore d0-d1/a0-a1
        add.w           &LOCAL_SIZE-0x4,%sp

        bra.b           iea_acc_done

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_operr(): 060FPSP entry point for FP Operr exception.      #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Operand Error exception in an operating system.              #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       _real_operr() - "callout" to operating system operr handler     #
#       _dmem_write_{byte,word,long}() - store data to mem (opclass 3)  #
#       store_dreg_{b,w,l}() - store data to data regfile (opclass 3)   #
#       facc_out_{b,w,l}() - store to memory took access error (opcl 3) #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP Operr exception frame        #
#       - The fsave frame contains the source operand                   #
#                                                                       #
# OUTPUT ************************************************************** #
#       No access error:                                                #
#       - The system stack is unchanged                                 #
#       - The fsave frame contains the adjusted src op for opclass 0,2  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       In a system where the FP Operr exception is enabled, the goal   #
# is to get to the handler specified at _real_operr(). But, on the 060, #
# for opclass zero and two instruction taking this exception, the       #
# input operand in the fsave frame may be incorrect for some cases      #
# and needs to be corrected. This handler calls fix_skewed_ops() to     #
# do just this and then exits through _real_operr().                    #
#       For opclass 3 instructions, the 060 doesn't store the default   #
# operr result out to memory or data register file as it should.        #
# This code must emulate the move out before finally exiting through    #
# _real_inex(). The move out, if to memory, is performed using          #
# _mem_write() "callout" routines that may return a failing result.     #
# In this special case, the handler must exit through facc_out()        #
# which creates an access error stack frame from the current operr      #
# stack frame.                                                          #
#                                                                       #
#########################################################################

        global          _fpsp_operr
_fpsp_operr:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################

        btst            &13,%d0                 # is instr an fmove out?
        bne.b           foperr_out              # fmove out


# here, we simply see if the operand in the fsave frame needs to be "unskewed".
# this would be the case for opclass two operations with a source infinity or
# denorm operand in the sgl or dbl format. NANs also become skewed, but can't
# cause an operr so we don't need to check for them here.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

foperr_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)

        unlk            %a6
        bra.l           _real_operr

########################################################################

#
# the hardware does not save the default result to memory on enabled
# operand error exceptions. we do this here before passing control to
# the user operand error handler.
#
# byte, word, and long destination format operations can pass
# through here. we simply need to test the sign of the src
# operand and save the appropriate minimum or maximum integer value
# to the effective address as pointed to by the stacked effective address.
#
# although packed opclass three operations can take operand error
# exceptions, they won't pass through here since they are caught
# first by the unsupported data format exception handler. that handler
# sends them directly to _real_operr() if necessary.
#
foperr_out:

        mov.w           FP_SRC_EX(%a6),%d1      # fetch exponent
        andi.w          &0x7fff,%d1
        cmpi.w          %d1,&0x7fff
        bne.b           foperr_out_not_qnan
# the operand is either an infinity or a QNAN.
        tst.l           FP_SRC_LO(%a6)
        bne.b           foperr_out_qnan
        mov.l           FP_SRC_HI(%a6),%d1
        andi.l          &0x7fffffff,%d1
        beq.b           foperr_out_not_qnan
foperr_out_qnan:
        mov.l           FP_SRC_HI(%a6),L_SCR1(%a6)
        bra.b           foperr_out_jmp

foperr_out_not_qnan:
        mov.l           &0x7fffffff,%d1
        tst.b           FP_SRC_EX(%a6)
        bpl.b           foperr_out_not_qnan2
        addq.l          &0x1,%d1
foperr_out_not_qnan2:
        mov.l           %d1,L_SCR1(%a6)

foperr_out_jmp:
        bfextu          %d0{&19:&3},%d0         # extract dst format field
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract <ea> mode,reg
        mov.w           (tbl_operr.b,%pc,%d0.w*2),%a0
        jmp             (tbl_operr.b,%pc,%a0)

tbl_operr:
        short           foperr_out_l - tbl_operr # long word integer
        short           tbl_operr    - tbl_operr # sgl prec shouldn't happen
        short           tbl_operr    - tbl_operr # ext prec shouldn't happen
        short           foperr_exit  - tbl_operr # packed won't enter here
        short           foperr_out_w - tbl_operr # word integer
        short           tbl_operr    - tbl_operr # dbl prec shouldn't happen
        short           foperr_out_b - tbl_operr # byte integer
        short           tbl_operr    - tbl_operr # packed won't enter here

foperr_out_b:
        mov.b           L_SCR1(%a6),%d0         # load positive default result
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           foperr_out_b_save_dn    # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_byte        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_b              # yes

        bra.w           foperr_exit
foperr_out_b_save_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_b            # store result to regfile
        bra.w           foperr_exit

foperr_out_w:
        mov.w           L_SCR1(%a6),%d0         # load positive default result
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           foperr_out_w_save_dn    # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_word        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_w              # yes

        bra.w           foperr_exit
foperr_out_w_save_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_w            # store result to regfile
        bra.w           foperr_exit

foperr_out_l:
        mov.l           L_SCR1(%a6),%d0         # load positive default result
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           foperr_out_l_save_dn    # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_long        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        bra.w           foperr_exit
foperr_out_l_save_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_l            # store result to regfile
        bra.w           foperr_exit

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_snan(): 060FPSP entry point for FP SNAN exception.        #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Signalling NAN exception in an operating system.             #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       _real_snan() - "callout" to operating system SNAN handler       #
#       _dmem_write_{byte,word,long}() - store data to mem (opclass 3)  #
#       store_dreg_{b,w,l}() - store data to data regfile (opclass 3)   #
#       facc_out_{b,w,l,d,x}() - store to mem took acc error (opcl 3)   #
#       _calc_ea_fout() - fix An if <ea> is -() or ()+; also get <ea>   #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP SNAN exception frame         #
#       - The fsave frame contains the source operand                   #
#                                                                       #
# OUTPUT ************************************************************** #
#       No access error:                                                #
#       - The system stack is unchanged                                 #
#       - The fsave frame contains the adjusted src op for opclass 0,2  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       In a system where the FP SNAN exception is enabled, the goal    #
# is to get to the handler specified at _real_snan(). But, on the 060,  #
# for opclass zero and two instructions taking this exception, the      #
# input operand in the fsave frame may be incorrect for some cases      #
# and needs to be corrected. This handler calls fix_skewed_ops() to     #
# do just this and then exits through _real_snan().                     #
#       For opclass 3 instructions, the 060 doesn't store the default   #
# SNAN result out to memory or data register file as it should.         #
# This code must emulate the move out before finally exiting through    #
# _real_snan(). The move out, if to memory, is performed using          #
# _mem_write() "callout" routines that may return a failing result.     #
# In this special case, the handler must exit through facc_out()        #
# which creates an access error stack frame from the current SNAN       #
# stack frame.                                                          #
#       For the case of an extended precision opclass 3 instruction,    #
# if the effective addressing mode was -() or ()+, then the address     #
# register must get updated by calling _calc_ea_fout(). If the <ea>     #
# was -(a7) from supervisor mode, then the exception frame currently    #
# on the system stack must be carefully moved "down" to make room       #
# for the operand being moved.                                          #
#                                                                       #
#########################################################################

        global          _fpsp_snan
_fpsp_snan:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################

        btst            &13,%d0                 # is instr an fmove out?
        bne.w           fsnan_out               # fmove out


# here, we simply see if the operand in the fsave frame needs to be "unskewed".
# this would be the case for opclass two operations with a source infinity or
# denorm operand in the sgl or dbl format. NANs also become skewed and must be
# fixed here.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

fsnan_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)

        unlk            %a6
        bra.l           _real_snan

########################################################################

#
# the hardware does not save the default result to memory on enabled
# snan exceptions. we do this here before passing control to
# the user snan handler.
#
# byte, word, long, and packed destination format operations can pass
# through here. since packed format operations already were handled by
# fpsp_unsupp(), then we need to do nothing else for them here.
# for byte, word, and long, we simply need to test the sign of the src
# operand and save the appropriate minimum or maximum integer value
# to the effective address as pointed to by the stacked effective address.
#
fsnan_out:

        bfextu          %d0{&19:&3},%d0         # extract dst format field
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract <ea> mode,reg
        mov.w           (tbl_snan.b,%pc,%d0.w*2),%a0
        jmp             (tbl_snan.b,%pc,%a0)

tbl_snan:
        short           fsnan_out_l - tbl_snan # long word integer
        short           fsnan_out_s - tbl_snan # sgl prec shouldn't happen
        short           fsnan_out_x - tbl_snan # ext prec shouldn't happen
        short           tbl_snan    - tbl_snan # packed needs no help
        short           fsnan_out_w - tbl_snan # word integer
        short           fsnan_out_d - tbl_snan # dbl prec shouldn't happen
        short           fsnan_out_b - tbl_snan # byte integer
        short           tbl_snan    - tbl_snan # packed needs no help

fsnan_out_b:
        mov.b           FP_SRC_HI(%a6),%d0      # load upper byte of SNAN
        bset            &6,%d0                  # set SNAN bit
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           fsnan_out_b_dn          # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_byte        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_b              # yes

        bra.w           fsnan_exit
fsnan_out_b_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_b            # store result to regfile
        bra.w           fsnan_exit

fsnan_out_w:
        mov.w           FP_SRC_HI(%a6),%d0      # load upper word of SNAN
        bset            &14,%d0                 # set SNAN bit
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           fsnan_out_w_dn          # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_word        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_w              # yes

        bra.w           fsnan_exit
fsnan_out_w_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_w            # store result to regfile
        bra.w           fsnan_exit

fsnan_out_l:
        mov.l           FP_SRC_HI(%a6),%d0      # load upper longword of SNAN
        bset            &30,%d0                 # set SNAN bit
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           fsnan_out_l_dn          # yes
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_long        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        bra.w           fsnan_exit
fsnan_out_l_dn:
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_l            # store result to regfile
        bra.w           fsnan_exit

fsnan_out_s:
        cmpi.b          %d1,&0x7                # is <ea> mode a data reg?
        ble.b           fsnan_out_d_dn          # yes
        mov.l           FP_SRC_EX(%a6),%d0      # fetch SNAN sign
        andi.l          &0x80000000,%d0         # keep sign
        ori.l           &0x7fc00000,%d0         # insert new exponent,SNAN bit
        mov.l           FP_SRC_HI(%a6),%d1      # load mantissa
        lsr.l           &0x8,%d1                # shift mantissa for sgl
        or.l            %d1,%d0                 # create sgl SNAN
        mov.l           EXC_EA(%a6),%a0         # pass: <ea> of default result
        bsr.l           _dmem_write_long        # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        bra.w           fsnan_exit
fsnan_out_d_dn:
        mov.l           FP_SRC_EX(%a6),%d0      # fetch SNAN sign
        andi.l          &0x80000000,%d0         # keep sign
        ori.l           &0x7fc00000,%d0         # insert new exponent,SNAN bit
        mov.l           %d1,-(%sp)
        mov.l           FP_SRC_HI(%a6),%d1      # load mantissa
        lsr.l           &0x8,%d1                # shift mantissa for sgl
        or.l            %d1,%d0                 # create sgl SNAN
        mov.l           (%sp)+,%d1
        andi.w          &0x0007,%d1
        bsr.l           store_dreg_l            # store result to regfile
        bra.w           fsnan_exit

fsnan_out_d:
        mov.l           FP_SRC_EX(%a6),%d0      # fetch SNAN sign
        andi.l          &0x80000000,%d0         # keep sign
        ori.l           &0x7ff80000,%d0         # insert new exponent,SNAN bit
        mov.l           FP_SRC_HI(%a6),%d1      # load hi mantissa
        mov.l           %d0,FP_SCR0_EX(%a6)     # store to temp space
        mov.l           &11,%d0                 # load shift amt
        lsr.l           %d0,%d1
        or.l            %d1,FP_SCR0_EX(%a6)     # create dbl hi
        mov.l           FP_SRC_HI(%a6),%d1      # load hi mantissa
        andi.l          &0x000007ff,%d1
        ror.l           %d0,%d1
        mov.l           %d1,FP_SCR0_HI(%a6)     # store to temp space
        mov.l           FP_SRC_LO(%a6),%d1      # load lo mantissa
        lsr.l           %d0,%d1
        or.l            %d1,FP_SCR0_HI(%a6)     # create dbl lo
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        mov.l           EXC_EA(%a6),%a1         # pass: dst addr
        movq.l          &0x8,%d0                # pass: size of 8 bytes
        bsr.l           _dmem_write             # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_d              # yes

        bra.w           fsnan_exit

# for extended precision, if the addressing mode is pre-decrement or
# post-increment, then the address register did not get updated.
# in addition, for pre-decrement, the stacked <ea> is incorrect.
fsnan_out_x:
        clr.b           SPCOND_FLG(%a6)         # clear special case flag

        mov.w           FP_SRC_EX(%a6),FP_SCR0_EX(%a6)
        clr.w           2+FP_SCR0(%a6)
        mov.l           FP_SRC_HI(%a6),%d0
        bset            &30,%d0
        mov.l           %d0,FP_SCR0_HI(%a6)
        mov.l           FP_SRC_LO(%a6),FP_SCR0_LO(%a6)

        btst            &0x5,EXC_SR(%a6)        # supervisor mode exception?
        bne.b           fsnan_out_x_s           # yes

        mov.l           %usp,%a0                # fetch user stack pointer
        mov.l           %a0,EXC_A7(%a6)         # save on stack for calc_ea()
        mov.l           (%a6),EXC_A6(%a6)

        bsr.l           _calc_ea_fout           # find the correct ea,update An
        mov.l           %a0,%a1
        mov.l           %a0,EXC_EA(%a6)         # stack correct <ea>

        mov.l           EXC_A7(%a6),%a0
        mov.l           %a0,%usp                # restore user stack pointer
        mov.l           EXC_A6(%a6),(%a6)

fsnan_out_x_save:
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        movq.l          &0xc,%d0                # pass: size of extended
        bsr.l           _dmem_write             # write the default result

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_x              # yes

        bra.w           fsnan_exit

fsnan_out_x_s:
        mov.l           (%a6),EXC_A6(%a6)

        bsr.l           _calc_ea_fout           # find the correct ea,update An
        mov.l           %a0,%a1
        mov.l           %a0,EXC_EA(%a6)         # stack correct <ea>

        mov.l           EXC_A6(%a6),(%a6)

        cmpi.b          SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
        bne.b           fsnan_out_x_save        # no

# the operation was "fmove.x SNAN,-(a7)" from supervisor mode.
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)

        mov.l           EXC_A6(%a6),%a6         # restore frame pointer

        mov.l           LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_PC+0x2(%sp),LOCAL_SIZE+EXC_PC+0x2-0xc(%sp)
        mov.l           LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp)

        mov.l           LOCAL_SIZE+FP_SCR0_EX(%sp),LOCAL_SIZE+EXC_SR(%sp)
        mov.l           LOCAL_SIZE+FP_SCR0_HI(%sp),LOCAL_SIZE+EXC_PC+0x2(%sp)
        mov.l           LOCAL_SIZE+FP_SCR0_LO(%sp),LOCAL_SIZE+EXC_EA(%sp)

        add.l           &LOCAL_SIZE-0x8,%sp

        bra.l           _real_snan

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_inex(): 060FPSP entry point for FP Inexact exception.     #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Inexact exception in an operating system.                    #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword                   #
#       fix_skewed_ops() - adjust src operand in fsave frame            #
#       set_tag_x() - determine optype of src/dst operands              #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       unnorm_fix() - change UNNORM operands to NORM or ZERO           #
#       load_fpn2() - load dst operand from FP regfile                  #
#       smovcr() - emulate an "fmovcr" instruction                      #
#       fout() - emulate an opclass 3 instruction                       #
#       tbl_unsupp - add of table of emulation routines for opclass 0,2 #
#       _real_inex() - "callout" to operating system inexact handler    #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP Inexact exception frame      #
#       - The fsave frame contains the source operand                   #
#                                                                       #
# OUTPUT ************************************************************** #
#       - The system stack is unchanged                                 #
#       - The fsave frame contains the adjusted src op for opclass 0,2  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       In a system where the FP Inexact exception is enabled, the goal #
# is to get to the handler specified at _real_inex(). But, on the 060,  #
# for opclass zero and two instruction taking this exception, the       #
# hardware doesn't store the correct result to the destination FP       #
# register as did the '040 and '881/2. This handler must emulate the    #
# instruction in order to get this value and then store it to the       #
# correct register before calling _real_inex().                         #
#       For opclass 3 instructions, the 060 doesn't store the default   #
# inexact result out to memory or data register file as it should.      #
# This code must emulate the move out by calling fout() before finally  #
# exiting through _real_inex().                                         #
#                                                                       #
#########################################################################

        global          _fpsp_inex
_fpsp_inex:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################

        btst            &13,%d0                 # is instr an fmove out?
        bne.w           finex_out               # fmove out


# the hardware, for "fabs" and "fneg" w/ a long source format, puts the
# longword integer directly into the upper longword of the mantissa along
# w/ an exponent value of 0x401e. we convert this to extended precision here.
        bfextu          %d0{&19:&3},%d0         # fetch instr size
        bne.b           finex_cont              # instr size is not long
        cmpi.w          FP_SRC_EX(%a6),&0x401e  # is exponent 0x401e?
        bne.b           finex_cont              # no
        fmov.l          &0x0,%fpcr
        fmov.l          FP_SRC_HI(%a6),%fp0     # load integer src
        fmov.x          %fp0,FP_SRC(%a6)        # store integer as extended precision
        mov.w           &0xe001,0x2+FP_SRC(%a6)

finex_cont:
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

# Here, we zero the ccode and exception byte field since we're going to
# emulate the whole instruction. Notice, though, that we don't kill the
# INEX1 bit. This is because a packed op has long since been converted
# to extended before arriving here. Therefore, we need to retain the
# INEX1 bit from when the operand was first converted.
        andi.l          &0x00ff01ff,USER_FPSR(%a6) # zero all but accured field

        fmov.l          &0x0,%fpcr              # zero current control regs
        fmov.l          &0x0,%fpsr

        bfextu          EXC_EXTWORD(%a6){&0:&6},%d1 # extract upper 6 of cmdreg
        cmpi.b          %d1,&0x17               # is op an fmovecr?
        beq.w           finex_fmovcr            # yes

        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           set_tag_x               # tag the operand type
        mov.b           %d0,STAG(%a6)           # maybe NORM,DENORM

# bits four and five of the fp extension word separate the monadic and dyadic
# operations that can pass through fpsp_inex(). remember that fcmp and ftst
# will never take this exception, but fsincos will.
        btst            &0x5,1+EXC_CMDREG(%a6)  # is operation monadic or dyadic?
        beq.b           finex_extract           # monadic

        btst            &0x4,1+EXC_CMDREG(%a6)  # is operation an fsincos?
        bne.b           finex_extract           # yes

        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg
        bsr.l           load_fpn2               # load dst into FP_DST

        lea             FP_DST(%a6),%a0         # pass: ptr to dst op
        bsr.l           set_tag_x               # tag the operand type
        cmpi.b          %d0,&UNNORM             # is operand an UNNORM?
        bne.b           finex_op2_done          # no
        bsr.l           unnorm_fix              # yes; convert to NORM,DENORM,or ZERO
finex_op2_done:
        mov.b           %d0,DTAG(%a6)           # save dst optype tag

finex_extract:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec/mode

        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.w          &0x007f,%d1             # extract extension

        lea             FP_SRC(%a6),%a0
        lea             FP_DST(%a6),%a1

        mov.l           (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr
        jsr             (tbl_unsupp.l,%pc,%d1.l*1)

# the operation has been emulated. the result is in fp0.
finex_save:
        bfextu          EXC_CMDREG(%a6){&6:&3},%d0
        bsr.l           store_fpreg

finex_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)

        unlk            %a6
        bra.l           _real_inex

finex_fmovcr:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec,mode
        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.l          &0x0000007f,%d1         # pass rom offset
        bsr.l           smovcr
        bra.b           finex_save

########################################################################

#
# the hardware does not save the default result to memory on enabled
# inexact exceptions. we do this here before passing control to
# the user inexact handler.
#
# byte, word, and long destination format operations can pass
# through here. so can double and single precision.
# although packed opclass three operations can take inexact
# exceptions, they won't pass through here since they are caught
# first by the unsupported data format exception handler. that handler
# sends them directly to _real_inex() if necessary.
#
finex_out:

        mov.b           &NORM,STAG(%a6)         # src is a NORM

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # pass rnd prec,mode

        andi.l          &0xffff00ff,USER_FPSR(%a6) # zero exception field

        lea             FP_SRC(%a6),%a0         # pass ptr to src operand

        bsr.l           fout                    # store the default result

        bra.b           finex_exit

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_dz(): 060FPSP entry point for FP DZ exception.            #
#                                                                       #
#       This handler should be the first code executed upon taking      #
#       the FP DZ exception in an operating system.                     #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read instruction longword from memory       #
#       fix_skewed_ops() - adjust fsave operand                         #
#       _real_dz() - "callout" exit point from FP DZ handler            #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the FP DZ exception stack.          #
#       - The fsave frame contains the source operand.                  #
#                                                                       #
# OUTPUT ************************************************************** #
#       - The system stack contains the FP DZ exception stack.          #
#       - The fsave frame contains the adjusted source operand.         #
#                                                                       #
# ALGORITHM *********************************************************** #
#       In a system where the DZ exception is enabled, the goal is to   #
# get to the handler specified at _real_dz(). But, on the 060, when the #
# exception is taken, the input operand in the fsave state frame may    #
# be incorrect for some cases and need to be adjusted. So, this package #
# adjusts the operand using fix_skewed_ops() and then branches to       #
# _real_dz().                                                           #
#                                                                       #
#########################################################################

        global          _fpsp_dz
_fpsp_dz:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        fsave           FP_SRC(%a6)             # grab the "busy" frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1 on stack

# the FPIAR holds the "current PC" of the faulting instruction
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

##############################################################################


# here, we simply see if the operand in the fsave frame needs to be "unskewed".
# this would be the case for opclass two operations with a source zero
# in the sgl or dbl format.
        lea             FP_SRC(%a6),%a0         # pass: ptr to src op
        bsr.l           fix_skewed_ops          # fix src op

fdz_exit:
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)

        unlk            %a6
        bra.l           _real_dz

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_fline(): 060FPSP entry point for "Line F emulator" exc.   #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       "Line F Emulator" exception in an operating system.             #
#                                                                       #
# XREF **************************************************************** #
#       _fpsp_unimp() - handle "FP Unimplemented" exceptions            #
#       _real_fpu_disabled() - handle "FPU disabled" exceptions         #
#       _real_fline() - handle "FLINE" exceptions                       #
#       _imem_read_long() - read instruction longword                   #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains a "Line F Emulator" exception       #
#         stack frame.                                                  #
#                                                                       #
# OUTPUT ************************************************************** #
#       - The system stack is unchanged                                 #
#                                                                       #
# ALGORITHM *********************************************************** #
#       When a "Line F Emulator" exception occurs, there are 3 possible #
# exception types, denoted by the exception stack frame format number:  #
#       (1) FPU unimplemented instruction (6 word stack frame)          #
#       (2) FPU disabled (8 word stack frame)                           #
#       (3) Line F (4 word stack frame)                                 #
#                                                                       #
#       This module determines which and forks the flow off to the      #
# appropriate "callout" (for "disabled" and "Line F") or to the         #
# correct emulation code (for "FPU unimplemented").                     #
#       This code also must check for "fmovecr" instructions w/ a       #
# non-zero <ea> field. These may get flagged as "Line F" but should     #
# really be flagged as "FPU Unimplemented". (This is a "feature" on     #
# the '060.                                                             #
#                                                                       #
#########################################################################

        global          _fpsp_fline
_fpsp_fline:

# check to see if this exception is a "FP Unimplemented Instruction"
# exception. if so, branch directly to that handler's entry point.
        cmpi.w          0x6(%sp),&0x202c
        beq.l           _fpsp_unimp

# check to see if the FPU is disabled. if so, jump to the OS entry
# point for that condition.
        cmpi.w          0x6(%sp),&0x402c
        beq.l           _real_fpu_disabled

# the exception was an "F-Line Illegal" exception. we check to see
# if the F-Line instruction is an "fmovecr" w/ a non-zero <ea>. if
# so, convert the F-Line exception stack frame to an FP Unimplemented
# Instruction exception stack frame else branch to the OS entry
# point for the F-Line exception handler.
        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1

        mov.l           EXC_PC(%a6),EXC_EXTWPTR(%a6)
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch instruction words

        bfextu          %d0{&0:&10},%d1         # is it an fmovecr?
        cmpi.w          %d1,&0x03c8
        bne.b           fline_fline             # no

        bfextu          %d0{&16:&6},%d1         # is it an fmovecr?
        cmpi.b          %d1,&0x17
        bne.b           fline_fline             # no

# it's an fmovecr w/ a non-zero <ea> that has entered through
# the F-Line Illegal exception.
# so, we need to convert the F-Line exception stack frame into an
# FP Unimplemented Instruction stack frame and jump to that entry
# point.
#
# but, if the FPU is disabled, then we need to jump to the FPU diabled
# entry point.
        movc            %pcr,%d0
        btst            &0x1,%d0
        beq.b           fline_fmovcr

        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        sub.l           &0x8,%sp                # make room for "Next PC", <ea>
        mov.w           0x8(%sp),(%sp)
        mov.l           0xa(%sp),0x2(%sp)       # move "Current PC"
        mov.w           &0x402c,0x6(%sp)
        mov.l           0x2(%sp),0xc(%sp)
        addq.l          &0x4,0x2(%sp)           # set "Next PC"

        bra.l           _real_fpu_disabled

fline_fmovcr:
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        fmov.l          0x2(%sp),%fpiar         # set current PC
        addq.l          &0x4,0x2(%sp)           # set Next PC

        mov.l           (%sp),-(%sp)
        mov.l           0x8(%sp),0x4(%sp)
        mov.b           &0x20,0x6(%sp)

        bra.l           _fpsp_unimp

fline_fline:
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        bra.l           _real_fline

#########################################################################
# XDEF **************************************************************** #
#       _fpsp_unimp(): 060FPSP entry point for FP "Unimplemented        #
#                      Instruction" exception.                          #
#                                                                       #
#       This handler should be the first code executed upon taking the  #
#       FP Unimplemented Instruction exception in an operating system.  #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_{word,long}() - read instruction word/longword       #
#       load_fop() - load src/dst ops from memory and/or FP regfile     #
#       store_fpreg() - store opclass 0 or 2 result to FP regfile       #
#       tbl_trans - addr of table of emulation routines for trnscndls   #
#       _real_access() - "callout" for access error exception           #
#       _fpsp_done() - "callout" for exit; work all done                #
#       _real_trace() - "callout" for Trace enabled exception           #
#       smovcr() - emulate "fmovecr" instruction                        #
#       funimp_skew() - adjust fsave src ops to "incorrect" value       #
#       _ftrapcc() - emulate an "ftrapcc" instruction                   #
#       _fdbcc() - emulate an "fdbcc" instruction                       #
#       _fscc() - emulate an "fscc" instruction                         #
#       _real_trap() - "callout" for Trap exception                     #
#       _real_bsun() - "callout" for enabled Bsun exception             #
#                                                                       #
# INPUT *************************************************************** #
#       - The system stack contains the "Unimplemented Instr" stk frame #
#                                                                       #
# OUTPUT ************************************************************** #
#       If access error:                                                #
#       - The system stack is changed to an access error stack frame    #
#       If Trace exception enabled:                                     #
#       - The system stack is changed to a Trace exception stack frame  #
#       Else: (normal case)                                             #
#       - Correct result has been stored as appropriate                 #
#                                                                       #
# ALGORITHM *********************************************************** #
#       There are two main cases of instructions that may enter here to #
# be emulated: (1) the FPgen instructions, most of which were also      #
# unimplemented on the 040, and (2) "ftrapcc", "fscc", and "fdbcc".     #
#       For the first set, this handler calls the routine load_fop()    #
# to load the source and destination (for dyadic) operands to be used   #
# for instruction emulation. The correct emulation routine is then      #
# chosen by decoding the instruction type and indexing into an          #
# emulation subroutine index table. After emulation returns, this       #
# handler checks to see if an exception should occur as a result of the #
# FP instruction emulation. If so, then an FP exception of the correct  #
# type is inserted into the FPU state frame using the "frestore"        #
# instruction before exiting through _fpsp_done(). In either the        #
# exceptional or non-exceptional cases, we must check to see if the     #
# Trace exception is enabled. If so, then we must create a Trace        #
# exception frame from the current exception frame and exit through     #
# _real_trace().                                                        #
#       For "fdbcc", "ftrapcc", and "fscc", the emulation subroutines   #
# _fdbcc(), _ftrapcc(), and _fscc() respectively are used. All three    #
# may flag that a BSUN exception should be taken. If so, then the       #
# current exception stack frame is converted into a BSUN exception      #
# stack frame and an exit is made through _real_bsun(). If the          #
# instruction was "ftrapcc" and a Trap exception should result, a Trap  #
# exception stack frame is created from the current frame and an exit   #
# is made through _real_trap(). If a Trace exception is pending, then   #
# a Trace exception frame is created from the current frame and a jump  #
# is made to _real_trace(). Finally, if none of these conditions exist, #
# then the handler exits though the callout _fpsp_done().               #
#                                                                       #
#       In any of the above scenarios, if a _mem_read() or _mem_write() #
# "callout" returns a failing value, then an access error stack frame   #
# is created from the current stack frame and an exit is made through   #
# _real_access().                                                       #
#                                                                       #
#########################################################################

#
# FP UNIMPLEMENTED INSTRUCTION STACK FRAME:
#
#       *****************
#       *               * => <ea> of fp unimp instr.
#       -      EA       -
#       *               *
#       *****************
#       * 0x2 *  0x02c  * => frame format and vector offset(vector #11)
#       *****************
#       *               *
#       -    Next PC    - => PC of instr to execute after exc handling
#       *               *
#       *****************
#       *      SR       * => SR at the time the exception was taken
#       *****************
#
# Note: the !NULL bit does not get set in the fsave frame when the
# machine encounters an fp unimp exception. Therefore, it must be set
# before leaving this handler.
#
        global          _fpsp_unimp
_fpsp_unimp:

        link.w          %a6,&-LOCAL_SIZE        # init stack frame

        movm.l          &0x0303,EXC_DREGS(%a6)  # save d0-d1/a0-a1
        fmovm.l         %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs
        fmovm.x         &0xc0,EXC_FPREGS(%a6)   # save fp0-fp1

        btst            &0x5,EXC_SR(%a6)        # user mode exception?
        bne.b           funimp_s                # no; supervisor mode

# save the value of the user stack pointer onto the stack frame
funimp_u:
        mov.l           %usp,%a0                # fetch user stack pointer
        mov.l           %a0,EXC_A7(%a6)         # store in stack frame
        bra.b           funimp_cont

# store the value of the supervisor stack pointer BEFORE the exc occurred.
# old_sp is address just above stacked effective address.
funimp_s:
        lea             4+EXC_EA(%a6),%a0       # load old a7'
        mov.l           %a0,EXC_A7(%a6)         # store a7'
        mov.l           %a0,OLD_A7(%a6)         # make a copy

funimp_cont:

# the FPIAR holds the "current PC" of the faulting instruction.
        mov.l           USER_FPIAR(%a6),EXC_EXTWPTR(%a6)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch the instruction words
        mov.l           %d0,EXC_OPWORD(%a6)

############################################################################

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        clr.b           SPCOND_FLG(%a6)         # clear "special case" flag

# Divide the fp instructions into 8 types based on the TYPE field in
# bits 6-8 of the opword(classes 6,7 are undefined).
# (for the '060, only two types  can take this exception)
#       bftst           %d0{&7:&3}              # test TYPE
        btst            &22,%d0                 # type 0 or 1 ?
        bne.w           funimp_misc             # type 1

#########################################
# TYPE == 0: General instructions       #
#########################################
funimp_gen:

        clr.b           STORE_FLG(%a6)          # clear "store result" flag

# clear the ccode byte and exception status byte
        andi.l          &0x00ff00ff,USER_FPSR(%a6)

        bfextu          %d0{&16:&6},%d1         # extract upper 6 of cmdreg
        cmpi.b          %d1,&0x17               # is op an fmovecr?
        beq.w           funimp_fmovcr           # yes

funimp_gen_op:
        bsr.l           _load_fop               # load

        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0      # fetch rnd mode

        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.w          &0x003f,%d1             # extract extension bits
        lsl.w           &0x3,%d1                # shift right 3 bits
        or.b            STAG(%a6),%d1           # insert src optag bits

        lea             FP_DST(%a6),%a1         # pass dst ptr in a1
        lea             FP_SRC(%a6),%a0         # pass src ptr in a0

        mov.w           (tbl_trans.w,%pc,%d1.w*2),%d1
        jsr             (tbl_trans.w,%pc,%d1.w*1) # emulate

funimp_fsave:
        mov.b           FPCR_ENABLE(%a6),%d0    # fetch exceptions enabled
        bne.w           funimp_ena              # some are enabled

funimp_store:
        bfextu          EXC_CMDREG(%a6){&6:&3},%d0 # fetch Dn
        bsr.l           store_fpreg             # store result to fp regfile

funimp_gen_exit:
        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

funimp_gen_exit_cmp:
        cmpi.b          SPCOND_FLG(%a6),&mia7_flg # was the ea mode (sp)+ ?
        beq.b           funimp_gen_exit_a7      # yes

        cmpi.b          SPCOND_FLG(%a6),&mda7_flg # was the ea mode -(sp) ?
        beq.b           funimp_gen_exit_a7      # yes

funimp_gen_exit_cont:
        unlk            %a6

funimp_gen_exit_cont2:
        btst            &0x7,(%sp)              # is trace on?
        beq.l           _fpsp_done              # no

# this catches a problem with the case where an exception will be re-inserted
# into the machine. the frestore has already been executed...so, the fmov.l
# alone of the control register would trigger an unwanted exception.
# until I feel like fixing this, we'll sidestep the exception.
        fsave           -(%sp)
        fmov.l          %fpiar,0x14(%sp)        # "Current PC" is in FPIAR
        frestore        (%sp)+
        mov.w           &0x2024,0x6(%sp)        # stk fmt = 0x2; voff = 0x24
        bra.l           _real_trace

funimp_gen_exit_a7:
        btst            &0x5,EXC_SR(%a6)        # supervisor or user mode?
        bne.b           funimp_gen_exit_a7_s    # supervisor

        mov.l           %a0,-(%sp)
        mov.l           EXC_A7(%a6),%a0
        mov.l           %a0,%usp
        mov.l           (%sp)+,%a0
        bra.b           funimp_gen_exit_cont

# if the instruction was executed from supervisor mode and the addressing
# mode was (a7)+, then the stack frame for the rte must be shifted "up"
# "n" bytes where "n" is the size of the src operand type.
# f<op>.{b,w,l,s,d,x,p}
funimp_gen_exit_a7_s:
        mov.l           %d0,-(%sp)              # save d0
        mov.l           EXC_A7(%a6),%d0         # load new a7'
        sub.l           OLD_A7(%a6),%d0         # subtract old a7'
        mov.l           0x2+EXC_PC(%a6),(0x2+EXC_PC,%a6,%d0) # shift stack frame
        mov.l           EXC_SR(%a6),(EXC_SR,%a6,%d0) # shift stack frame
        mov.w           %d0,EXC_SR(%a6)         # store incr number
        mov.l           (%sp)+,%d0              # restore d0

        unlk            %a6

        add.w           (%sp),%sp               # stack frame shifted
        bra.b           funimp_gen_exit_cont2

######################
# fmovecr.x #ccc,fpn #
######################
funimp_fmovcr:
        clr.l           %d0
        mov.b           FPCR_MODE(%a6),%d0
        mov.b           1+EXC_CMDREG(%a6),%d1
        andi.l          &0x0000007f,%d1         # pass rom offset in d1
        bsr.l           smovcr
        bra.w           funimp_fsave

#########################################################################

#
# the user has enabled some exceptions. we figure not to see this too
# often so that's why it gets lower priority.
#
funimp_ena:

# was an exception set that was also enabled?
        and.b           FPSR_EXCEPT(%a6),%d0    # keep only ones enabled and set
        bfffo           %d0{&24:&8},%d0         # find highest priority exception
        bne.b           funimp_exc              # at least one was set

# no exception that was enabled was set BUT if we got an exact overflow
# and overflow wasn't enabled but inexact was (yech!) then this is
# an inexact exception; otherwise, return to normal non-exception flow.
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
        beq.w           funimp_store            # no; return to normal flow

# the overflow w/ exact result happened but was inexact set in the FPCR?
funimp_ovfl:
        btst            &inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled?
        beq.w           funimp_store            # no; return to normal flow
        bra.b           funimp_exc_ovfl         # yes

# some exception happened that was actually enabled.
# we'll insert this new exception into the FPU and then return.
funimp_exc:
        subi.l          &24,%d0                 # fix offset to be 0-8
        cmpi.b          %d0,&0x6                # is exception INEX?
        bne.b           funimp_exc_force        # no

# the enabled exception was inexact. so, if it occurs with an overflow
# or underflow that was disabled, then we have to force an overflow or
# underflow frame. the eventual overflow or underflow handler will see that
# it's actually an inexact and act appropriately. this is the only easy
# way to have the EXOP available for the enabled inexact handler when
# a disabled overflow or underflow has also happened.
        btst            &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur?
        bne.b           funimp_exc_ovfl         # yes
        btst            &unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur?
        bne.b           funimp_exc_unfl         # yes

# force the fsave exception status bits to signal an exception of the
# appropriate type. don't forget to "skew" the source operand in case we
# "unskewed" the one the hardware initially gave us.
funimp_exc_force:
        mov.l           %d0,-(%sp)              # save d0
        bsr.l           funimp_skew             # check for special case
        mov.l           (%sp)+,%d0              # restore d0
        mov.w           (tbl_funimp_except.b,%pc,%d0.w*2),2+FP_SRC(%a6)
        bra.b           funimp_gen_exit2        # exit with frestore

tbl_funimp_except:
        short           0xe002, 0xe006, 0xe004, 0xe005
        short           0xe003, 0xe002, 0xe001, 0xe001

# insert an overflow frame
funimp_exc_ovfl:
        bsr.l           funimp_skew             # check for special case
        mov.w           &0xe005,2+FP_SRC(%a6)
        bra.b           funimp_gen_exit2

# insert an underflow frame
funimp_exc_unfl:
        bsr.l           funimp_skew             # check for special case
        mov.w           &0xe003,2+FP_SRC(%a6)

# this is the general exit point for an enabled exception that will be
# restored into the machine for the instruction just emulated.
funimp_gen_exit2:
        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # insert exceptional status

        bra.w           funimp_gen_exit_cmp

############################################################################

#
# TYPE == 1: FDB<cc>, FS<cc>, FTRAP<cc>
#
# These instructions were implemented on the '881/2 and '040 in hardware but
# are emulated in software on the '060.
#
funimp_misc:
        bfextu          %d0{&10:&3},%d1         # extract mode field
        cmpi.b          %d1,&0x1                # is it an fdb<cc>?
        beq.w           funimp_fdbcc            # yes
        cmpi.b          %d1,&0x7                # is it an fs<cc>?
        bne.w           funimp_fscc             # yes
        bfextu          %d0{&13:&3},%d1
        cmpi.b          %d1,&0x2                # is it an fs<cc>?
        blt.w           funimp_fscc             # yes

#########################
# ftrap<cc>             #
# ftrap<cc>.w #<data>   #
# ftrap<cc>.l #<data>   #
#########################
funimp_ftrapcc:

        bsr.l           _ftrapcc                # FTRAP<cc>()

        cmpi.b          SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
        beq.w           funimp_bsun             # yes

        cmpi.b          SPCOND_FLG(%a6),&ftrapcc_flg # should a trap occur?
        bne.w           funimp_done             # no

#        FP UNIMP FRAME            TRAP  FRAME
#       *****************       *****************
#       **    <EA>     **       **  Current PC **
#       *****************       *****************
#       * 0x2 *  0x02c  *       * 0x2 *  0x01c  *
#       *****************       *****************
#       **   Next PC   **       **   Next PC   **
#       *****************       *****************
#       *      SR       *       *      SR       *
#       *****************       *****************
#           (6 words)               (6 words)
#
# the ftrapcc instruction should take a trap. so, here we must create a
# trap stack frame from an unimplemented fp instruction stack frame and
# jump to the user supplied entry point for the trap exception
funimp_ftrapcc_tp:
        mov.l           USER_FPIAR(%a6),EXC_EA(%a6) # Address = Current PC
        mov.w           &0x201c,EXC_VOFF(%a6)   # Vector Offset = 0x01c

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6
        bra.l           _real_trap

#########################
# fdb<cc> Dn,<label>    #
#########################
funimp_fdbcc:

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word         # read displacement

        tst.l           %d1                     # did ifetch fail?
        bne.w           funimp_iacc             # yes

        ext.l           %d0                     # sign extend displacement

        bsr.l           _fdbcc                  # FDB<cc>()

        cmpi.b          SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
        beq.w           funimp_bsun

        bra.w           funimp_done             # branch to finish

#################
# fs<cc>.b <ea> #
#################
funimp_fscc:

        bsr.l           _fscc                   # FS<cc>()

# I am assuming here that an "fs<cc>.b -(An)" or "fs<cc>.b (An)+" instruction
# does not need to update "An" before taking a bsun exception.
        cmpi.b          SPCOND_FLG(%a6),&fbsun_flg # is enabled bsun occurring?
        beq.w           funimp_bsun

        btst            &0x5,EXC_SR(%a6)        # yes; is it a user mode exception?
        bne.b           funimp_fscc_s           # no

funimp_fscc_u:
        mov.l           EXC_A7(%a6),%a0         # yes; set new USP
        mov.l           %a0,%usp
        bra.w           funimp_done             # branch to finish

# remember, I'm assuming that post-increment is bogus...(it IS!!!)
# so, the least significant WORD of the stacked effective address got
# overwritten by the "fs<cc> -(An)". We must shift the stack frame "down"
# so that the rte will work correctly without destroying the result.
# even though the operation size is byte, the stack ptr is decr by 2.
#
# remember, also, this instruction may be traced.
funimp_fscc_s:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg # was a7 modified?
        bne.w           funimp_done             # no

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        btst            &0x7,(%sp)              # is trace enabled?
        bne.b           funimp_fscc_s_trace     # yes

        subq.l          &0x2,%sp
        mov.l           0x2(%sp),(%sp)          # shift SR,hi(PC) "down"
        mov.l           0x6(%sp),0x4(%sp)       # shift lo(PC),voff "down"
        bra.l           _fpsp_done

funimp_fscc_s_trace:
        subq.l          &0x2,%sp
        mov.l           0x2(%sp),(%sp)          # shift SR,hi(PC) "down"
        mov.w           0x6(%sp),0x4(%sp)       # shift lo(PC)
        mov.w           &0x2024,0x6(%sp)        # fmt/voff = $2024
        fmov.l          %fpiar,0x8(%sp)         # insert "current PC"

        bra.l           _real_trace

#
# The ftrap<cc>, fs<cc>, or fdb<cc> is to take an enabled bsun. we must convert
# the fp unimplemented instruction exception stack frame into a bsun stack frame,
# restore a bsun exception into the machine, and branch to the user
# supplied bsun hook.
#
#        FP UNIMP FRAME            BSUN FRAME
#       *****************       *****************
#       **    <EA>     **       * 0x0 * 0x0c0   *
#       *****************       *****************
#       * 0x2 *  0x02c  *       ** Current PC  **
#       *****************       *****************
#       **   Next PC   **       *      SR       *
#       *****************       *****************
#       *      SR       *           (4 words)
#       *****************
#           (6 words)
#
funimp_bsun:
        mov.w           &0x00c0,2+EXC_EA(%a6)   # Fmt = 0x0; Vector Offset = 0x0c0
        mov.l           USER_FPIAR(%a6),EXC_VOFF(%a6) # PC = Current PC
        mov.w           EXC_SR(%a6),2+EXC_PC(%a6) # shift SR "up"

        mov.w           &0xe000,2+FP_SRC(%a6)   # bsun exception enabled

        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        frestore        FP_SRC(%a6)             # restore bsun exception

        unlk            %a6

        addq.l          &0x4,%sp                # erase sludge

        bra.l           _real_bsun              # branch to user bsun hook

#
# all ftrapcc/fscc/fdbcc processing has been completed. unwind the stack frame
# and return.
#
# as usual, we have to check for trace mode being on here. since instructions
# modifying the supervisor stack frame don't pass through here, this is a
# relatively easy task.
#
funimp_done:
        fmovm.x         EXC_FP0(%a6),&0xc0      # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        btst            &0x7,(%sp)              # is trace enabled?
        bne.b           funimp_trace            # yes

        bra.l           _fpsp_done

#        FP UNIMP FRAME           TRACE  FRAME
#       *****************       *****************
#       **    <EA>     **       **  Current PC **
#       *****************       *****************
#       * 0x2 *  0x02c  *       * 0x2 *  0x024  *
#       *****************       *****************
#       **   Next PC   **       **   Next PC   **
#       *****************       *****************
#       *      SR       *       *      SR       *
#       *****************       *****************
#           (6 words)               (6 words)
#
# the fscc instruction should take a trace trap. so, here we must create a
# trace stack frame from an unimplemented fp instruction stack frame and
# jump to the user supplied entry point for the trace exception
funimp_trace:
        fmov.l          %fpiar,0x8(%sp)         # current PC is in fpiar
        mov.b           &0x24,0x7(%sp)          # vector offset = 0x024

        bra.l           _real_trace

################################################################

        global          tbl_trans
        swbeg           &0x1c0
tbl_trans:
        short           tbl_trans - tbl_trans   # $00-0 fmovecr all
        short           tbl_trans - tbl_trans   # $00-1 fmovecr all
        short           tbl_trans - tbl_trans   # $00-2 fmovecr all
        short           tbl_trans - tbl_trans   # $00-3 fmovecr all
        short           tbl_trans - tbl_trans   # $00-4 fmovecr all
        short           tbl_trans - tbl_trans   # $00-5 fmovecr all
        short           tbl_trans - tbl_trans   # $00-6 fmovecr all
        short           tbl_trans - tbl_trans   # $00-7 fmovecr all

        short           tbl_trans - tbl_trans   # $01-0 fint norm
        short           tbl_trans - tbl_trans   # $01-1 fint zero
        short           tbl_trans - tbl_trans   # $01-2 fint inf
        short           tbl_trans - tbl_trans   # $01-3 fint qnan
        short           tbl_trans - tbl_trans   # $01-5 fint denorm
        short           tbl_trans - tbl_trans   # $01-4 fint snan
        short           tbl_trans - tbl_trans   # $01-6 fint unnorm
        short           tbl_trans - tbl_trans   # $01-7 ERROR

        short           ssinh    - tbl_trans    # $02-0 fsinh norm
        short           src_zero - tbl_trans    # $02-1 fsinh zero
        short           src_inf  - tbl_trans    # $02-2 fsinh inf
        short           src_qnan - tbl_trans    # $02-3 fsinh qnan
        short           ssinhd   - tbl_trans    # $02-5 fsinh denorm
        short           src_snan - tbl_trans    # $02-4 fsinh snan
        short           tbl_trans - tbl_trans   # $02-6 fsinh unnorm
        short           tbl_trans - tbl_trans   # $02-7 ERROR

        short           tbl_trans - tbl_trans   # $03-0 fintrz norm
        short           tbl_trans - tbl_trans   # $03-1 fintrz zero
        short           tbl_trans - tbl_trans   # $03-2 fintrz inf
        short           tbl_trans - tbl_trans   # $03-3 fintrz qnan
        short           tbl_trans - tbl_trans   # $03-5 fintrz denorm
        short           tbl_trans - tbl_trans   # $03-4 fintrz snan
        short           tbl_trans - tbl_trans   # $03-6 fintrz unnorm
        short           tbl_trans - tbl_trans   # $03-7 ERROR

        short           tbl_trans - tbl_trans   # $04-0 fsqrt norm
        short           tbl_trans - tbl_trans   # $04-1 fsqrt zero
        short           tbl_trans - tbl_trans   # $04-2 fsqrt inf
        short           tbl_trans - tbl_trans   # $04-3 fsqrt qnan
        short           tbl_trans - tbl_trans   # $04-5 fsqrt denorm
        short           tbl_trans - tbl_trans   # $04-4 fsqrt snan
        short           tbl_trans - tbl_trans   # $04-6 fsqrt unnorm
        short           tbl_trans - tbl_trans   # $04-7 ERROR

        short           tbl_trans - tbl_trans   # $05-0 ERROR
        short           tbl_trans - tbl_trans   # $05-1 ERROR
        short           tbl_trans - tbl_trans   # $05-2 ERROR
        short           tbl_trans - tbl_trans   # $05-3 ERROR
        short           tbl_trans - tbl_trans   # $05-4 ERROR
        short           tbl_trans - tbl_trans   # $05-5 ERROR
        short           tbl_trans - tbl_trans   # $05-6 ERROR
        short           tbl_trans - tbl_trans   # $05-7 ERROR

        short           slognp1  - tbl_trans    # $06-0 flognp1 norm
        short           src_zero - tbl_trans    # $06-1 flognp1 zero
        short           sopr_inf - tbl_trans    # $06-2 flognp1 inf
        short           src_qnan - tbl_trans    # $06-3 flognp1 qnan
        short           slognp1d - tbl_trans    # $06-5 flognp1 denorm
        short           src_snan - tbl_trans    # $06-4 flognp1 snan
        short           tbl_trans - tbl_trans   # $06-6 flognp1 unnorm
        short           tbl_trans - tbl_trans   # $06-7 ERROR

        short           tbl_trans - tbl_trans   # $07-0 ERROR
        short           tbl_trans - tbl_trans   # $07-1 ERROR
        short           tbl_trans - tbl_trans   # $07-2 ERROR
        short           tbl_trans - tbl_trans   # $07-3 ERROR
        short           tbl_trans - tbl_trans   # $07-4 ERROR
        short           tbl_trans - tbl_trans   # $07-5 ERROR
        short           tbl_trans - tbl_trans   # $07-6 ERROR
        short           tbl_trans - tbl_trans   # $07-7 ERROR

        short           setoxm1  - tbl_trans    # $08-0 fetoxm1 norm
        short           src_zero - tbl_trans    # $08-1 fetoxm1 zero
        short           setoxm1i - tbl_trans    # $08-2 fetoxm1 inf
        short           src_qnan - tbl_trans    # $08-3 fetoxm1 qnan
        short           setoxm1d - tbl_trans    # $08-5 fetoxm1 denorm
        short           src_snan - tbl_trans    # $08-4 fetoxm1 snan
        short           tbl_trans - tbl_trans   # $08-6 fetoxm1 unnorm
        short           tbl_trans - tbl_trans   # $08-7 ERROR

        short           stanh    - tbl_trans    # $09-0 ftanh norm
        short           src_zero - tbl_trans    # $09-1 ftanh zero
        short           src_one  - tbl_trans    # $09-2 ftanh inf
        short           src_qnan - tbl_trans    # $09-3 ftanh qnan
        short           stanhd   - tbl_trans    # $09-5 ftanh denorm
        short           src_snan - tbl_trans    # $09-4 ftanh snan
        short           tbl_trans - tbl_trans   # $09-6 ftanh unnorm
        short           tbl_trans - tbl_trans   # $09-7 ERROR

        short           satan    - tbl_trans    # $0a-0 fatan norm
        short           src_zero - tbl_trans    # $0a-1 fatan zero
        short           spi_2    - tbl_trans    # $0a-2 fatan inf
        short           src_qnan - tbl_trans    # $0a-3 fatan qnan
        short           satand   - tbl_trans    # $0a-5 fatan denorm
        short           src_snan - tbl_trans    # $0a-4 fatan snan
        short           tbl_trans - tbl_trans   # $0a-6 fatan unnorm
        short           tbl_trans - tbl_trans   # $0a-7 ERROR

        short           tbl_trans - tbl_trans   # $0b-0 ERROR
        short           tbl_trans - tbl_trans   # $0b-1 ERROR
        short           tbl_trans - tbl_trans   # $0b-2 ERROR
        short           tbl_trans - tbl_trans   # $0b-3 ERROR
        short           tbl_trans - tbl_trans   # $0b-4 ERROR
        short           tbl_trans - tbl_trans   # $0b-5 ERROR
        short           tbl_trans - tbl_trans   # $0b-6 ERROR
        short           tbl_trans - tbl_trans   # $0b-7 ERROR

        short           sasin    - tbl_trans    # $0c-0 fasin norm
        short           src_zero - tbl_trans    # $0c-1 fasin zero
        short           t_operr  - tbl_trans    # $0c-2 fasin inf
        short           src_qnan - tbl_trans    # $0c-3 fasin qnan
        short           sasind   - tbl_trans    # $0c-5 fasin denorm
        short           src_snan - tbl_trans    # $0c-4 fasin snan
        short           tbl_trans - tbl_trans   # $0c-6 fasin unnorm
        short           tbl_trans - tbl_trans   # $0c-7 ERROR

        short           satanh   - tbl_trans    # $0d-0 fatanh norm
        short           src_zero - tbl_trans    # $0d-1 fatanh zero
        short           t_operr  - tbl_trans    # $0d-2 fatanh inf
        short           src_qnan - tbl_trans    # $0d-3 fatanh qnan
        short           satanhd  - tbl_trans    # $0d-5 fatanh denorm
        short           src_snan - tbl_trans    # $0d-4 fatanh snan
        short           tbl_trans - tbl_trans   # $0d-6 fatanh unnorm
        short           tbl_trans - tbl_trans   # $0d-7 ERROR

        short           ssin     - tbl_trans    # $0e-0 fsin norm
        short           src_zero - tbl_trans    # $0e-1 fsin zero
        short           t_operr  - tbl_trans    # $0e-2 fsin inf
        short           src_qnan - tbl_trans    # $0e-3 fsin qnan
        short           ssind    - tbl_trans    # $0e-5 fsin denorm
        short           src_snan - tbl_trans    # $0e-4 fsin snan
        short           tbl_trans - tbl_trans   # $0e-6 fsin unnorm
        short           tbl_trans - tbl_trans   # $0e-7 ERROR

        short           stan     - tbl_trans    # $0f-0 ftan norm
        short           src_zero - tbl_trans    # $0f-1 ftan zero
        short           t_operr  - tbl_trans    # $0f-2 ftan inf
        short           src_qnan - tbl_trans    # $0f-3 ftan qnan
        short           stand    - tbl_trans    # $0f-5 ftan denorm
        short           src_snan - tbl_trans    # $0f-4 ftan snan
        short           tbl_trans - tbl_trans   # $0f-6 ftan unnorm
        short           tbl_trans - tbl_trans   # $0f-7 ERROR

        short           setox    - tbl_trans    # $10-0 fetox norm
        short           ld_pone  - tbl_trans    # $10-1 fetox zero
        short           szr_inf  - tbl_trans    # $10-2 fetox inf
        short           src_qnan - tbl_trans    # $10-3 fetox qnan
        short           setoxd   - tbl_trans    # $10-5 fetox denorm
        short           src_snan - tbl_trans    # $10-4 fetox snan
        short           tbl_trans - tbl_trans   # $10-6 fetox unnorm
        short           tbl_trans - tbl_trans   # $10-7 ERROR

        short           stwotox  - tbl_trans    # $11-0 ftwotox norm
        short           ld_pone  - tbl_trans    # $11-1 ftwotox zero
        short           szr_inf  - tbl_trans    # $11-2 ftwotox inf
        short           src_qnan - tbl_trans    # $11-3 ftwotox qnan
        short           stwotoxd - tbl_trans    # $11-5 ftwotox denorm
        short           src_snan - tbl_trans    # $11-4 ftwotox snan
        short           tbl_trans - tbl_trans   # $11-6 ftwotox unnorm
        short           tbl_trans - tbl_trans   # $11-7 ERROR

        short           stentox  - tbl_trans    # $12-0 ftentox norm
        short           ld_pone  - tbl_trans    # $12-1 ftentox zero
        short           szr_inf  - tbl_trans    # $12-2 ftentox inf
        short           src_qnan - tbl_trans    # $12-3 ftentox qnan
        short           stentoxd - tbl_trans    # $12-5 ftentox denorm
        short           src_snan - tbl_trans    # $12-4 ftentox snan
        short           tbl_trans - tbl_trans   # $12-6 ftentox unnorm
        short           tbl_trans - tbl_trans   # $12-7 ERROR

        short           tbl_trans - tbl_trans   # $13-0 ERROR
        short           tbl_trans - tbl_trans   # $13-1 ERROR
        short           tbl_trans - tbl_trans   # $13-2 ERROR
        short           tbl_trans - tbl_trans   # $13-3 ERROR
        short           tbl_trans - tbl_trans   # $13-4 ERROR
        short           tbl_trans - tbl_trans   # $13-5 ERROR
        short           tbl_trans - tbl_trans   # $13-6 ERROR
        short           tbl_trans - tbl_trans   # $13-7 ERROR

        short           slogn    - tbl_trans    # $14-0 flogn norm
        short           t_dz2    - tbl_trans    # $14-1 flogn zero
        short           sopr_inf - tbl_trans    # $14-2 flogn inf
        short           src_qnan - tbl_trans    # $14-3 flogn qnan
        short           slognd   - tbl_trans    # $14-5 flogn denorm
        short           src_snan - tbl_trans    # $14-4 flogn snan
        short           tbl_trans - tbl_trans   # $14-6 flogn unnorm
        short           tbl_trans - tbl_trans   # $14-7 ERROR

        short           slog10   - tbl_trans    # $15-0 flog10 norm
        short           t_dz2    - tbl_trans    # $15-1 flog10 zero
        short           sopr_inf - tbl_trans    # $15-2 flog10 inf
        short           src_qnan - tbl_trans    # $15-3 flog10 qnan
        short           slog10d  - tbl_trans    # $15-5 flog10 denorm
        short           src_snan - tbl_trans    # $15-4 flog10 snan
        short           tbl_trans - tbl_trans   # $15-6 flog10 unnorm
        short           tbl_trans - tbl_trans   # $15-7 ERROR

        short           slog2    - tbl_trans    # $16-0 flog2 norm
        short           t_dz2    - tbl_trans    # $16-1 flog2 zero
        short           sopr_inf - tbl_trans    # $16-2 flog2 inf
        short           src_qnan - tbl_trans    # $16-3 flog2 qnan
        short           slog2d   - tbl_trans    # $16-5 flog2 denorm
        short           src_snan - tbl_trans    # $16-4 flog2 snan
        short           tbl_trans - tbl_trans   # $16-6 flog2 unnorm
        short           tbl_trans - tbl_trans   # $16-7 ERROR

        short           tbl_trans - tbl_trans   # $17-0 ERROR
        short           tbl_trans - tbl_trans   # $17-1 ERROR
        short           tbl_trans - tbl_trans   # $17-2 ERROR
        short           tbl_trans - tbl_trans   # $17-3 ERROR
        short           tbl_trans - tbl_trans   # $17-4 ERROR
        short           tbl_trans - tbl_trans   # $17-5 ERROR
        short           tbl_trans - tbl_trans   # $17-6 ERROR
        short           tbl_trans - tbl_trans   # $17-7 ERROR

        short           tbl_trans - tbl_trans   # $18-0 fabs norm
        short           tbl_trans - tbl_trans   # $18-1 fabs zero
        short           tbl_trans - tbl_trans   # $18-2 fabs inf
        short           tbl_trans - tbl_trans   # $18-3 fabs qnan
        short           tbl_trans - tbl_trans   # $18-5 fabs denorm
        short           tbl_trans - tbl_trans   # $18-4 fabs snan
        short           tbl_trans - tbl_trans   # $18-6 fabs unnorm
        short           tbl_trans - tbl_trans   # $18-7 ERROR

        short           scosh    - tbl_trans    # $19-0 fcosh norm
        short           ld_pone  - tbl_trans    # $19-1 fcosh zero
        short           ld_pinf  - tbl_trans    # $19-2 fcosh inf
        short           src_qnan - tbl_trans    # $19-3 fcosh qnan
        short           scoshd   - tbl_trans    # $19-5 fcosh denorm
        short           src_snan - tbl_trans    # $19-4 fcosh snan
        short           tbl_trans - tbl_trans   # $19-6 fcosh unnorm
        short           tbl_trans - tbl_trans   # $19-7 ERROR

        short           tbl_trans - tbl_trans   # $1a-0 fneg norm
        short           tbl_trans - tbl_trans   # $1a-1 fneg zero
        short           tbl_trans - tbl_trans   # $1a-2 fneg inf
        short           tbl_trans - tbl_trans   # $1a-3 fneg qnan
        short           tbl_trans - tbl_trans   # $1a-5 fneg denorm
        short           tbl_trans - tbl_trans   # $1a-4 fneg snan
        short           tbl_trans - tbl_trans   # $1a-6 fneg unnorm
        short           tbl_trans - tbl_trans   # $1a-7 ERROR

        short           tbl_trans - tbl_trans   # $1b-0 ERROR
        short           tbl_trans - tbl_trans   # $1b-1 ERROR
        short           tbl_trans - tbl_trans   # $1b-2 ERROR
        short           tbl_trans - tbl_trans   # $1b-3 ERROR
        short           tbl_trans - tbl_trans   # $1b-4 ERROR
        short           tbl_trans - tbl_trans   # $1b-5 ERROR
        short           tbl_trans - tbl_trans   # $1b-6 ERROR
        short           tbl_trans - tbl_trans   # $1b-7 ERROR

        short           sacos    - tbl_trans    # $1c-0 facos norm
        short           ld_ppi2  - tbl_trans    # $1c-1 facos zero
        short           t_operr  - tbl_trans    # $1c-2 facos inf
        short           src_qnan - tbl_trans    # $1c-3 facos qnan
        short           sacosd   - tbl_trans    # $1c-5 facos denorm
        short           src_snan - tbl_trans    # $1c-4 facos snan
        short           tbl_trans - tbl_trans   # $1c-6 facos unnorm
        short           tbl_trans - tbl_trans   # $1c-7 ERROR

        short           scos     - tbl_trans    # $1d-0 fcos norm
        short           ld_pone  - tbl_trans    # $1d-1 fcos zero
        short           t_operr  - tbl_trans    # $1d-2 fcos inf
        short           src_qnan - tbl_trans    # $1d-3 fcos qnan
        short           scosd    - tbl_trans    # $1d-5 fcos denorm
        short           src_snan - tbl_trans    # $1d-4 fcos snan
        short           tbl_trans - tbl_trans   # $1d-6 fcos unnorm
        short           tbl_trans - tbl_trans   # $1d-7 ERROR

        short           sgetexp  - tbl_trans    # $1e-0 fgetexp norm
        short           src_zero - tbl_trans    # $1e-1 fgetexp zero
        short           t_operr  - tbl_trans    # $1e-2 fgetexp inf
        short           src_qnan - tbl_trans    # $1e-3 fgetexp qnan
        short           sgetexpd - tbl_trans    # $1e-5 fgetexp denorm
        short           src_snan - tbl_trans    # $1e-4 fgetexp snan
        short           tbl_trans - tbl_trans   # $1e-6 fgetexp unnorm
        short           tbl_trans - tbl_trans   # $1e-7 ERROR

        short           sgetman  - tbl_trans    # $1f-0 fgetman norm
        short           src_zero - tbl_trans    # $1f-1 fgetman zero
        short           t_operr  - tbl_trans    # $1f-2 fgetman inf
        short           src_qnan - tbl_trans    # $1f-3 fgetman qnan
        short           sgetmand - tbl_trans    # $1f-5 fgetman denorm
        short           src_snan - tbl_trans    # $1f-4 fgetman snan
        short           tbl_trans - tbl_trans   # $1f-6 fgetman unnorm
        short           tbl_trans - tbl_trans   # $1f-7 ERROR

        short           tbl_trans - tbl_trans   # $20-0 fdiv norm
        short           tbl_trans - tbl_trans   # $20-1 fdiv zero
        short           tbl_trans - tbl_trans   # $20-2 fdiv inf
        short           tbl_trans - tbl_trans   # $20-3 fdiv qnan
        short           tbl_trans - tbl_trans   # $20-5 fdiv denorm
        short           tbl_trans - tbl_trans   # $20-4 fdiv snan
        short           tbl_trans - tbl_trans   # $20-6 fdiv unnorm
        short           tbl_trans - tbl_trans   # $20-7 ERROR

        short           smod_snorm - tbl_trans  # $21-0 fmod norm
        short           smod_szero - tbl_trans  # $21-1 fmod zero
        short           smod_sinf - tbl_trans   # $21-2 fmod inf
        short           sop_sqnan - tbl_trans   # $21-3 fmod qnan
        short           smod_sdnrm - tbl_trans  # $21-5 fmod denorm
        short           sop_ssnan - tbl_trans   # $21-4 fmod snan
        short           tbl_trans - tbl_trans   # $21-6 fmod unnorm
        short           tbl_trans - tbl_trans   # $21-7 ERROR

        short           tbl_trans - tbl_trans   # $22-0 fadd norm
        short           tbl_trans - tbl_trans   # $22-1 fadd zero
        short           tbl_trans - tbl_trans   # $22-2 fadd inf
        short           tbl_trans - tbl_trans   # $22-3 fadd qnan
        short           tbl_trans - tbl_trans   # $22-5 fadd denorm
        short           tbl_trans - tbl_trans   # $22-4 fadd snan
        short           tbl_trans - tbl_trans   # $22-6 fadd unnorm
        short           tbl_trans - tbl_trans   # $22-7 ERROR

        short           tbl_trans - tbl_trans   # $23-0 fmul norm
        short           tbl_trans - tbl_trans   # $23-1 fmul zero
        short           tbl_trans - tbl_trans   # $23-2 fmul inf
        short           tbl_trans - tbl_trans   # $23-3 fmul qnan
        short           tbl_trans - tbl_trans   # $23-5 fmul denorm
        short           tbl_trans - tbl_trans   # $23-4 fmul snan
        short           tbl_trans - tbl_trans   # $23-6 fmul unnorm
        short           tbl_trans - tbl_trans   # $23-7 ERROR

        short           tbl_trans - tbl_trans   # $24-0 fsgldiv norm
        short           tbl_trans - tbl_trans   # $24-1 fsgldiv zero
        short           tbl_trans - tbl_trans   # $24-2 fsgldiv inf
        short           tbl_trans - tbl_trans   # $24-3 fsgldiv qnan
        short           tbl_trans - tbl_trans   # $24-5 fsgldiv denorm
        short           tbl_trans - tbl_trans   # $24-4 fsgldiv snan
        short           tbl_trans - tbl_trans   # $24-6 fsgldiv unnorm
        short           tbl_trans - tbl_trans   # $24-7 ERROR

        short           srem_snorm - tbl_trans  # $25-0 frem norm
        short           srem_szero - tbl_trans  # $25-1 frem zero
        short           srem_sinf - tbl_trans   # $25-2 frem inf
        short           sop_sqnan - tbl_trans   # $25-3 frem qnan
        short           srem_sdnrm - tbl_trans  # $25-5 frem denorm
        short           sop_ssnan - tbl_trans   # $25-4 frem snan
        short           tbl_trans - tbl_trans   # $25-6 frem unnorm
        short           tbl_trans - tbl_trans   # $25-7 ERROR

        short           sscale_snorm - tbl_trans # $26-0 fscale norm
        short           sscale_szero - tbl_trans # $26-1 fscale zero
        short           sscale_sinf - tbl_trans # $26-2 fscale inf
        short           sop_sqnan - tbl_trans   # $26-3 fscale qnan
        short           sscale_sdnrm - tbl_trans # $26-5 fscale denorm
        short           sop_ssnan - tbl_trans   # $26-4 fscale snan
        short           tbl_trans - tbl_trans   # $26-6 fscale unnorm
        short           tbl_trans - tbl_trans   # $26-7 ERROR

        short           tbl_trans - tbl_trans   # $27-0 fsglmul norm
        short           tbl_trans - tbl_trans   # $27-1 fsglmul zero
        short           tbl_trans - tbl_trans   # $27-2 fsglmul inf
        short           tbl_trans - tbl_trans   # $27-3 fsglmul qnan
        short           tbl_trans - tbl_trans   # $27-5 fsglmul denorm
        short           tbl_trans - tbl_trans   # $27-4 fsglmul snan
        short           tbl_trans - tbl_trans   # $27-6 fsglmul unnorm
        short           tbl_trans - tbl_trans   # $27-7 ERROR

        short           tbl_trans - tbl_trans   # $28-0 fsub norm
        short           tbl_trans - tbl_trans   # $28-1 fsub zero
        short           tbl_trans - tbl_trans   # $28-2 fsub inf
        short           tbl_trans - tbl_trans   # $28-3 fsub qnan
        short           tbl_trans - tbl_trans   # $28-5 fsub denorm
        short           tbl_trans - tbl_trans   # $28-4 fsub snan
        short           tbl_trans - tbl_trans   # $28-6 fsub unnorm
        short           tbl_trans - tbl_trans   # $28-7 ERROR

        short           tbl_trans - tbl_trans   # $29-0 ERROR
        short           tbl_trans - tbl_trans   # $29-1 ERROR
        short           tbl_trans - tbl_trans   # $29-2 ERROR
        short           tbl_trans - tbl_trans   # $29-3 ERROR
        short           tbl_trans - tbl_trans   # $29-4 ERROR
        short           tbl_trans - tbl_trans   # $29-5 ERROR
        short           tbl_trans - tbl_trans   # $29-6 ERROR
        short           tbl_trans - tbl_trans   # $29-7 ERROR

        short           tbl_trans - tbl_trans   # $2a-0 ERROR
        short           tbl_trans - tbl_trans   # $2a-1 ERROR
        short           tbl_trans - tbl_trans   # $2a-2 ERROR
        short           tbl_trans - tbl_trans   # $2a-3 ERROR
        short           tbl_trans - tbl_trans   # $2a-4 ERROR
        short           tbl_trans - tbl_trans   # $2a-5 ERROR
        short           tbl_trans - tbl_trans   # $2a-6 ERROR
        short           tbl_trans - tbl_trans   # $2a-7 ERROR

        short           tbl_trans - tbl_trans   # $2b-0 ERROR
        short           tbl_trans - tbl_trans   # $2b-1 ERROR
        short           tbl_trans - tbl_trans   # $2b-2 ERROR
        short           tbl_trans - tbl_trans   # $2b-3 ERROR
        short           tbl_trans - tbl_trans   # $2b-4 ERROR
        short           tbl_trans - tbl_trans   # $2b-5 ERROR
        short           tbl_trans - tbl_trans   # $2b-6 ERROR
        short           tbl_trans - tbl_trans   # $2b-7 ERROR

        short           tbl_trans - tbl_trans   # $2c-0 ERROR
        short           tbl_trans - tbl_trans   # $2c-1 ERROR
        short           tbl_trans - tbl_trans   # $2c-2 ERROR
        short           tbl_trans - tbl_trans   # $2c-3 ERROR
        short           tbl_trans - tbl_trans   # $2c-4 ERROR
        short           tbl_trans - tbl_trans   # $2c-5 ERROR
        short           tbl_trans - tbl_trans   # $2c-6 ERROR
        short           tbl_trans - tbl_trans   # $2c-7 ERROR

        short           tbl_trans - tbl_trans   # $2d-0 ERROR
        short           tbl_trans - tbl_trans   # $2d-1 ERROR
        short           tbl_trans - tbl_trans   # $2d-2 ERROR
        short           tbl_trans - tbl_trans   # $2d-3 ERROR
        short           tbl_trans - tbl_trans   # $2d-4 ERROR
        short           tbl_trans - tbl_trans   # $2d-5 ERROR
        short           tbl_trans - tbl_trans   # $2d-6 ERROR
        short           tbl_trans - tbl_trans   # $2d-7 ERROR

        short           tbl_trans - tbl_trans   # $2e-0 ERROR
        short           tbl_trans - tbl_trans   # $2e-1 ERROR
        short           tbl_trans - tbl_trans   # $2e-2 ERROR
        short           tbl_trans - tbl_trans   # $2e-3 ERROR
        short           tbl_trans - tbl_trans   # $2e-4 ERROR
        short           tbl_trans - tbl_trans   # $2e-5 ERROR
        short           tbl_trans - tbl_trans   # $2e-6 ERROR
        short           tbl_trans - tbl_trans   # $2e-7 ERROR

        short           tbl_trans - tbl_trans   # $2f-0 ERROR
        short           tbl_trans - tbl_trans   # $2f-1 ERROR
        short           tbl_trans - tbl_trans   # $2f-2 ERROR
        short           tbl_trans - tbl_trans   # $2f-3 ERROR
        short           tbl_trans - tbl_trans   # $2f-4 ERROR
        short           tbl_trans - tbl_trans   # $2f-5 ERROR
        short           tbl_trans - tbl_trans   # $2f-6 ERROR
        short           tbl_trans - tbl_trans   # $2f-7 ERROR

        short           ssincos  - tbl_trans    # $30-0 fsincos norm
        short           ssincosz - tbl_trans    # $30-1 fsincos zero
        short           ssincosi - tbl_trans    # $30-2 fsincos inf
        short           ssincosqnan - tbl_trans # $30-3 fsincos qnan
        short           ssincosd - tbl_trans    # $30-5 fsincos denorm
        short           ssincossnan - tbl_trans # $30-4 fsincos snan
        short           tbl_trans - tbl_trans   # $30-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $30-7 ERROR

        short           ssincos  - tbl_trans    # $31-0 fsincos norm
        short           ssincosz - tbl_trans    # $31-1 fsincos zero
        short           ssincosi - tbl_trans    # $31-2 fsincos inf
        short           ssincosqnan - tbl_trans # $31-3 fsincos qnan
        short           ssincosd - tbl_trans    # $31-5 fsincos denorm
        short           ssincossnan - tbl_trans # $31-4 fsincos snan
        short           tbl_trans - tbl_trans   # $31-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $31-7 ERROR

        short           ssincos  - tbl_trans    # $32-0 fsincos norm
        short           ssincosz - tbl_trans    # $32-1 fsincos zero
        short           ssincosi - tbl_trans    # $32-2 fsincos inf
        short           ssincosqnan - tbl_trans # $32-3 fsincos qnan
        short           ssincosd - tbl_trans    # $32-5 fsincos denorm
        short           ssincossnan - tbl_trans # $32-4 fsincos snan
        short           tbl_trans - tbl_trans   # $32-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $32-7 ERROR

        short           ssincos  - tbl_trans    # $33-0 fsincos norm
        short           ssincosz - tbl_trans    # $33-1 fsincos zero
        short           ssincosi - tbl_trans    # $33-2 fsincos inf
        short           ssincosqnan - tbl_trans # $33-3 fsincos qnan
        short           ssincosd - tbl_trans    # $33-5 fsincos denorm
        short           ssincossnan - tbl_trans # $33-4 fsincos snan
        short           tbl_trans - tbl_trans   # $33-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $33-7 ERROR

        short           ssincos  - tbl_trans    # $34-0 fsincos norm
        short           ssincosz - tbl_trans    # $34-1 fsincos zero
        short           ssincosi - tbl_trans    # $34-2 fsincos inf
        short           ssincosqnan - tbl_trans # $34-3 fsincos qnan
        short           ssincosd - tbl_trans    # $34-5 fsincos denorm
        short           ssincossnan - tbl_trans # $34-4 fsincos snan
        short           tbl_trans - tbl_trans   # $34-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $34-7 ERROR

        short           ssincos  - tbl_trans    # $35-0 fsincos norm
        short           ssincosz - tbl_trans    # $35-1 fsincos zero
        short           ssincosi - tbl_trans    # $35-2 fsincos inf
        short           ssincosqnan - tbl_trans # $35-3 fsincos qnan
        short           ssincosd - tbl_trans    # $35-5 fsincos denorm
        short           ssincossnan - tbl_trans # $35-4 fsincos snan
        short           tbl_trans - tbl_trans   # $35-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $35-7 ERROR

        short           ssincos  - tbl_trans    # $36-0 fsincos norm
        short           ssincosz - tbl_trans    # $36-1 fsincos zero
        short           ssincosi - tbl_trans    # $36-2 fsincos inf
        short           ssincosqnan - tbl_trans # $36-3 fsincos qnan
        short           ssincosd - tbl_trans    # $36-5 fsincos denorm
        short           ssincossnan - tbl_trans # $36-4 fsincos snan
        short           tbl_trans - tbl_trans   # $36-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $36-7 ERROR

        short           ssincos  - tbl_trans    # $37-0 fsincos norm
        short           ssincosz - tbl_trans    # $37-1 fsincos zero
        short           ssincosi - tbl_trans    # $37-2 fsincos inf
        short           ssincosqnan - tbl_trans # $37-3 fsincos qnan
        short           ssincosd - tbl_trans    # $37-5 fsincos denorm
        short           ssincossnan - tbl_trans # $37-4 fsincos snan
        short           tbl_trans - tbl_trans   # $37-6 fsincos unnorm
        short           tbl_trans - tbl_trans   # $37-7 ERROR

##########

# the instruction fetch access for the displacement word for the
# fdbcc emulation failed. here, we create an access error frame
# from the current frame and branch to _real_access().
funimp_iacc:
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1

        mov.l           USER_FPIAR(%a6),EXC_PC(%a6) # store current PC

        unlk            %a6

        mov.l           (%sp),-(%sp)            # store SR,hi(PC)
        mov.w           0x8(%sp),0x4(%sp)       # store lo(PC)
        mov.w           &0x4008,0x6(%sp)        # store voff
        mov.l           0x2(%sp),0x8(%sp)       # store EA
        mov.l           &0x09428001,0xc(%sp)    # store FSLW

        btst            &0x5,(%sp)              # user or supervisor mode?
        beq.b           funimp_iacc_end         # user
        bset            &0x2,0xd(%sp)           # set supervisor TM bit

funimp_iacc_end:
        bra.l           _real_access

#########################################################################
# ssin():     computes the sine of a normalized input                   #
# ssind():    computes the sine of a denormalized input                 #
# scos():     computes the cosine of a normalized input                 #
# scosd():    computes the cosine of a denormalized input               #
# ssincos():  computes the sine and cosine of a normalized input        #
# ssincosd(): computes the sine and cosine of a denormalized input      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = sin(X) or cos(X)                                          #
#                                                                       #
#    For ssincos(X):                                                    #
#       fp0 = sin(X)                                                    #
#       fp1 = cos(X)                                                    #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 1 ulp in 64 significant bit, i.e. #
#       within 0.5001 ulp to 53 bits if the result is subsequently      #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       SIN and COS:                                                    #
#       1. If SIN is invoked, set AdjN := 0; otherwise, set AdjN := 1.  #
#                                                                       #
#       2. If |X| >= 15Pi or |X| < 2**(-40), go to 7.                   #
#                                                                       #
#       3. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let        #
#               k = N mod 4, so in particular, k = 0,1,2,or 3.          #
#               Overwrite k by k := k + AdjN.                           #
#                                                                       #
#       4. If k is even, go to 6.                                       #
#                                                                       #
#       5. (k is odd) Set j := (k-1)/2, sgn := (-1)**j.                 #
#               Return sgn*cos(r) where cos(r) is approximated by an    #
#               even polynomial in r, 1 + r*r*(B1+s*(B2+ ... + s*B8)),  #
#               s = r*r.                                                #
#               Exit.                                                   #
#                                                                       #
#       6. (k is even) Set j := k/2, sgn := (-1)**j. Return sgn*sin(r)  #
#               where sin(r) is approximated by an odd polynomial in r  #
#               r + r*s*(A1+s*(A2+ ... + s*A7)),        s = r*r.        #
#               Exit.                                                   #
#                                                                       #
#       7. If |X| > 1, go to 9.                                         #
#                                                                       #
#       8. (|X|<2**(-40)) If SIN is invoked, return X;                  #
#               otherwise return 1.                                     #
#                                                                       #
#       9. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,           #
#               go back to 3.                                           #
#                                                                       #
#       SINCOS:                                                         #
#       1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.                   #
#                                                                       #
#       2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let        #
#               k = N mod 4, so in particular, k = 0,1,2,or 3.          #
#                                                                       #
#       3. If k is even, go to 5.                                       #
#                                                                       #
#       4. (k is odd) Set j1 := (k-1)/2, j2 := j1 (EOR) (k mod 2), ie.  #
#               j1 exclusive or with the l.s.b. of k.                   #
#               sgn1 := (-1)**j1, sgn2 := (-1)**j2.                     #
#               SIN(X) = sgn1 * cos(r) and COS(X) = sgn2*sin(r) where   #
#               sin(r) and cos(r) are computed as odd and even          #
#               polynomials in r, respectively. Exit                    #
#                                                                       #
#       5. (k is even) Set j1 := k/2, sgn1 := (-1)**j1.                 #
#               SIN(X) = sgn1 * sin(r) and COS(X) = sgn1*cos(r) where   #
#               sin(r) and cos(r) are computed as odd and even          #
#               polynomials in r, respectively. Exit                    #
#                                                                       #
#       6. If |X| > 1, go to 8.                                         #
#                                                                       #
#       7. (|X|<2**(-40)) SIN(X) = X and COS(X) = 1. Exit.              #
#                                                                       #
#       8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi,           #
#               go back to 2.                                           #
#                                                                       #
#########################################################################

SINA7:  long            0xBD6AAA77,0xCCC994F5
SINA6:  long            0x3DE61209,0x7AAE8DA1
SINA5:  long            0xBE5AE645,0x2A118AE4
SINA4:  long            0x3EC71DE3,0xA5341531
SINA3:  long            0xBF2A01A0,0x1A018B59,0x00000000,0x00000000
SINA2:  long            0x3FF80000,0x88888888,0x888859AF,0x00000000
SINA1:  long            0xBFFC0000,0xAAAAAAAA,0xAAAAAA99,0x00000000

COSB8:  long            0x3D2AC4D0,0xD6011EE3
COSB7:  long            0xBDA9396F,0x9F45AC19
COSB6:  long            0x3E21EED9,0x0612C972
COSB5:  long            0xBE927E4F,0xB79D9FCF
COSB4:  long            0x3EFA01A0,0x1A01D423,0x00000000,0x00000000
COSB3:  long            0xBFF50000,0xB60B60B6,0x0B61D438,0x00000000
COSB2:  long            0x3FFA0000,0xAAAAAAAA,0xAAAAAB5E
COSB1:  long            0xBF000000

        set             INARG,FP_SCR0

        set             X,FP_SCR0
#       set             XDCARE,X+2
        set             XFRAC,X+4

        set             RPRIME,FP_SCR0
        set             SPRIME,FP_SCR1

        set             POSNEG1,L_SCR1
        set             TWOTO63,L_SCR1

        set             ENDFLAG,L_SCR2
        set             INT,L_SCR2

        set             ADJN,L_SCR3

############################################
        global          ssin
ssin:
        mov.l           &0,ADJN(%a6)            # yes; SET ADJN TO 0
        bra.b           SINBGN

############################################
        global          scos
scos:
        mov.l           &1,ADJN(%a6)            # yes; SET ADJN TO 1

############################################
SINBGN:
#--SAVE FPCR, FP1. CHECK IF |X| IS TOO SMALL OR LARGE

        fmov.x          (%a0),%fp0              # LOAD INPUT
        fmov.x          %fp0,X(%a6)             # save input at X

# "COMPACTIFY" X
        mov.l           (%a0),%d1               # put exp in hi word
        mov.w           4(%a0),%d1              # fetch hi(man)
        and.l           &0x7FFFFFFF,%d1         # strip sign

        cmpi.l          %d1,&0x3FD78000         # is |X| >= 2**(-40)?
        bge.b           SOK1                    # no
        bra.w           SINSM                   # yes; input is very small

SOK1:
        cmp.l           %d1,&0x4004BC7E         # is |X| < 15 PI?
        blt.b           SINMAIN                 # no
        bra.w           SREDUCEX                # yes; input is very large

#--THIS IS THE USUAL CASE, |X| <= 15 PI.
#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
SINMAIN:
        fmov.x          %fp0,%fp1
        fmul.d          TWOBYPI(%pc),%fp1       # X*2/PI

        lea             PITBL+0x200(%pc),%a1    # TABLE OF N*PI/2, N = -32,...,32

        fmov.l          %fp1,INT(%a6)           # CONVERT TO INTEGER

        mov.l           INT(%a6),%d1            # make a copy of N
        asl.l           &4,%d1                  # N *= 16
        add.l           %d1,%a1                 # tbl_addr = a1 + (N*16)

# A1 IS THE ADDRESS OF N*PIBY2
# ...WHICH IS IN TWO PIECES Y1 & Y2
        fsub.x          (%a1)+,%fp0             # X-Y1
        fsub.s          (%a1),%fp0              # fp0 = R = (X-Y1)-Y2

SINCONT:
#--continuation from REDUCEX

#--GET N+ADJN AND SEE IF SIN(R) OR COS(R) IS NEEDED
        mov.l           INT(%a6),%d1
        add.l           ADJN(%a6),%d1           # SEE IF D0 IS ODD OR EVEN
        ror.l           &1,%d1                  # D0 WAS ODD IFF D0 IS NEGATIVE
        cmp.l           %d1,&0
        blt.w           COSPOLY

#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
#--THEN WE RETURN       SGN*SIN(R). SGN*SIN(R) IS COMPUTED BY
#--R' + R'*S*(A1 + S(A2 + S(A3 + S(A4 + ... + SA7)))), WHERE
#--R' = SGN*R, S=R*R. THIS CAN BE REWRITTEN AS
#--R' + R'*S*( [A1+T(A3+T(A5+TA7))] + [S(A2+T(A4+TA6))])
#--WHERE T=S*S.
#--NOTE THAT A3 THROUGH A7 ARE STORED IN DOUBLE PRECISION
#--WHILE A1 AND A2 ARE IN DOUBLE-EXTENDED FORMAT.
SINPOLY:
        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmov.x          %fp0,X(%a6)             # X IS R
        fmul.x          %fp0,%fp0               # FP0 IS S

        fmov.d          SINA7(%pc),%fp3
        fmov.d          SINA6(%pc),%fp2

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS T

        ror.l           &1,%d1
        and.l           &0x80000000,%d1
# ...LEAST SIG. BIT OF D0 IN SIGN POSITION
        eor.l           %d1,X(%a6)              # X IS NOW R'= SGN*R

        fmul.x          %fp1,%fp3               # TA7
        fmul.x          %fp1,%fp2               # TA6

        fadd.d          SINA5(%pc),%fp3         # A5+TA7
        fadd.d          SINA4(%pc),%fp2         # A4+TA6

        fmul.x          %fp1,%fp3               # T(A5+TA7)
        fmul.x          %fp1,%fp2               # T(A4+TA6)

        fadd.d          SINA3(%pc),%fp3         # A3+T(A5+TA7)
        fadd.x          SINA2(%pc),%fp2         # A2+T(A4+TA6)

        fmul.x          %fp3,%fp1               # T(A3+T(A5+TA7))

        fmul.x          %fp0,%fp2               # S(A2+T(A4+TA6))
        fadd.x          SINA1(%pc),%fp1         # A1+T(A3+T(A5+TA7))
        fmul.x          X(%a6),%fp0             # R'*S

        fadd.x          %fp2,%fp1               # [A1+T(A3+T(A5+TA7))]+[S(A2+T(A4+TA6))]

        fmul.x          %fp1,%fp0               # SIN(R')-R'

        fmovm.x         (%sp)+,&0x30            # restore fp2/fp3

        fmov.l          %d0,%fpcr               # restore users round mode,prec
        fadd.x          X(%a6),%fp0             # last inst - possible exception set
        bra             t_inx2

#--LET J BE THE LEAST SIG. BIT OF D0, LET SGN := (-1)**J.
#--THEN WE RETURN       SGN*COS(R). SGN*COS(R) IS COMPUTED BY
#--SGN + S'*(B1 + S(B2 + S(B3 + S(B4 + ... + SB8)))), WHERE
#--S=R*R AND S'=SGN*S. THIS CAN BE REWRITTEN AS
#--SGN + S'*([B1+T(B3+T(B5+TB7))] + [S(B2+T(B4+T(B6+TB8)))])
#--WHERE T=S*S.
#--NOTE THAT B4 THROUGH B8 ARE STORED IN DOUBLE PRECISION
#--WHILE B2 AND B3 ARE IN DOUBLE-EXTENDED FORMAT, B1 IS -1/2
#--AND IS THEREFORE STORED AS SINGLE PRECISION.
COSPOLY:
        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmul.x          %fp0,%fp0               # FP0 IS S

        fmov.d          COSB8(%pc),%fp2
        fmov.d          COSB7(%pc),%fp3

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS T

        fmov.x          %fp0,X(%a6)             # X IS S
        ror.l           &1,%d1
        and.l           &0x80000000,%d1
# ...LEAST SIG. BIT OF D0 IN SIGN POSITION

        fmul.x          %fp1,%fp2               # TB8

        eor.l           %d1,X(%a6)              # X IS NOW S'= SGN*S
        and.l           &0x80000000,%d1

        fmul.x          %fp1,%fp3               # TB7

        or.l            &0x3F800000,%d1         # D0 IS SGN IN SINGLE
        mov.l           %d1,POSNEG1(%a6)

        fadd.d          COSB6(%pc),%fp2         # B6+TB8
        fadd.d          COSB5(%pc),%fp3         # B5+TB7

        fmul.x          %fp1,%fp2               # T(B6+TB8)
        fmul.x          %fp1,%fp3               # T(B5+TB7)

        fadd.d          COSB4(%pc),%fp2         # B4+T(B6+TB8)
        fadd.x          COSB3(%pc),%fp3         # B3+T(B5+TB7)

        fmul.x          %fp1,%fp2               # T(B4+T(B6+TB8))
        fmul.x          %fp3,%fp1               # T(B3+T(B5+TB7))

        fadd.x          COSB2(%pc),%fp2         # B2+T(B4+T(B6+TB8))
        fadd.s          COSB1(%pc),%fp1         # B1+T(B3+T(B5+TB7))

        fmul.x          %fp2,%fp0               # S(B2+T(B4+T(B6+TB8)))

        fadd.x          %fp1,%fp0

        fmul.x          X(%a6),%fp0

        fmovm.x         (%sp)+,&0x30            # restore fp2/fp3

        fmov.l          %d0,%fpcr               # restore users round mode,prec
        fadd.s          POSNEG1(%a6),%fp0       # last inst - possible exception set
        bra             t_inx2

##############################################

# SINe: Big OR Small?
#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
#--IF |X| < 2**(-40), RETURN X OR 1.
SINBORS:
        cmp.l           %d1,&0x3FFF8000
        bgt.l           SREDUCEX

SINSM:
        mov.l           ADJN(%a6),%d1
        cmp.l           %d1,&0
        bgt.b           COSTINY

# here, the operation may underflow iff the precision is sgl or dbl.
# extended denorms are handled through another entry point.
SINTINY:
#       mov.w           &0x0000,XDCARE(%a6)     # JUST IN CASE

        fmov.l          %d0,%fpcr               # restore users round mode,prec
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          X(%a6),%fp0             # last inst - possible exception set
        bra             t_catch

COSTINY:
        fmov.s          &0x3F800000,%fp0        # fp0 = 1.0
        fmov.l          %d0,%fpcr               # restore users round mode,prec
        fadd.s          &0x80800000,%fp0        # last inst - possible exception set
        bra             t_pinx2

################################################
        global          ssind
#--SIN(X) = X FOR DENORMALIZED X
ssind:
        bra             t_extdnrm

############################################
        global          scosd
#--COS(X) = 1 FOR DENORMALIZED X
scosd:
        fmov.s          &0x3F800000,%fp0        # fp0 = 1.0
        bra             t_pinx2

##################################################

        global          ssincos
ssincos:
#--SET ADJN TO 4
        mov.l           &4,ADJN(%a6)

        fmov.x          (%a0),%fp0              # LOAD INPUT
        fmov.x          %fp0,X(%a6)

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1         # COMPACTIFY X

        cmp.l           %d1,&0x3FD78000         # |X| >= 2**(-40)?
        bge.b           SCOK1
        bra.w           SCSM

SCOK1:
        cmp.l           %d1,&0x4004BC7E         # |X| < 15 PI?
        blt.b           SCMAIN
        bra.w           SREDUCEX


#--THIS IS THE USUAL CASE, |X| <= 15 PI.
#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
SCMAIN:
        fmov.x          %fp0,%fp1

        fmul.d          TWOBYPI(%pc),%fp1       # X*2/PI

        lea             PITBL+0x200(%pc),%a1    # TABLE OF N*PI/2, N = -32,...,32

        fmov.l          %fp1,INT(%a6)           # CONVERT TO INTEGER

        mov.l           INT(%a6),%d1
        asl.l           &4,%d1
        add.l           %d1,%a1                 # ADDRESS OF N*PIBY2, IN Y1, Y2

        fsub.x          (%a1)+,%fp0             # X-Y1
        fsub.s          (%a1),%fp0              # FP0 IS R = (X-Y1)-Y2

SCCONT:
#--continuation point from REDUCEX

        mov.l           INT(%a6),%d1
        ror.l           &1,%d1
        cmp.l           %d1,&0                  # D0 < 0 IFF N IS ODD
        bge.w           NEVEN

SNODD:
#--REGISTERS SAVED SO FAR: D0, A0, FP2.
        fmovm.x         &0x04,-(%sp)            # save fp2

        fmov.x          %fp0,RPRIME(%a6)
        fmul.x          %fp0,%fp0               # FP0 IS S = R*R
        fmov.d          SINA7(%pc),%fp1         # A7
        fmov.d          COSB8(%pc),%fp2         # B8
        fmul.x          %fp0,%fp1               # SA7
        fmul.x          %fp0,%fp2               # SB8

        mov.l           %d2,-(%sp)
        mov.l           %d1,%d2
        ror.l           &1,%d2
        and.l           &0x80000000,%d2
        eor.l           %d1,%d2
        and.l           &0x80000000,%d2

        fadd.d          SINA6(%pc),%fp1         # A6+SA7
        fadd.d          COSB7(%pc),%fp2         # B7+SB8

        fmul.x          %fp0,%fp1               # S(A6+SA7)
        eor.l           %d2,RPRIME(%a6)
        mov.l           (%sp)+,%d2
        fmul.x          %fp0,%fp2               # S(B7+SB8)
        ror.l           &1,%d1
        and.l           &0x80000000,%d1
        mov.l           &0x3F800000,POSNEG1(%a6)
        eor.l           %d1,POSNEG1(%a6)

        fadd.d          SINA5(%pc),%fp1         # A5+S(A6+SA7)
        fadd.d          COSB6(%pc),%fp2         # B6+S(B7+SB8)

        fmul.x          %fp0,%fp1               # S(A5+S(A6+SA7))
        fmul.x          %fp0,%fp2               # S(B6+S(B7+SB8))
        fmov.x          %fp0,SPRIME(%a6)

        fadd.d          SINA4(%pc),%fp1         # A4+S(A5+S(A6+SA7))
        eor.l           %d1,SPRIME(%a6)
        fadd.d          COSB5(%pc),%fp2         # B5+S(B6+S(B7+SB8))

        fmul.x          %fp0,%fp1               # S(A4+...)
        fmul.x          %fp0,%fp2               # S(B5+...)

        fadd.d          SINA3(%pc),%fp1         # A3+S(A4+...)
        fadd.d          COSB4(%pc),%fp2         # B4+S(B5+...)

        fmul.x          %fp0,%fp1               # S(A3+...)
        fmul.x          %fp0,%fp2               # S(B4+...)

        fadd.x          SINA2(%pc),%fp1         # A2+S(A3+...)
        fadd.x          COSB3(%pc),%fp2         # B3+S(B4+...)

        fmul.x          %fp0,%fp1               # S(A2+...)
        fmul.x          %fp0,%fp2               # S(B3+...)

        fadd.x          SINA1(%pc),%fp1         # A1+S(A2+...)
        fadd.x          COSB2(%pc),%fp2         # B2+S(B3+...)

        fmul.x          %fp0,%fp1               # S(A1+...)
        fmul.x          %fp2,%fp0               # S(B2+...)

        fmul.x          RPRIME(%a6),%fp1        # R'S(A1+...)
        fadd.s          COSB1(%pc),%fp0         # B1+S(B2...)
        fmul.x          SPRIME(%a6),%fp0        # S'(B1+S(B2+...))

        fmovm.x         (%sp)+,&0x20            # restore fp2

        fmov.l          %d0,%fpcr
        fadd.x          RPRIME(%a6),%fp1        # COS(X)
        bsr             sto_cos                 # store cosine result
        fadd.s          POSNEG1(%a6),%fp0       # SIN(X)
        bra             t_inx2

NEVEN:
#--REGISTERS SAVED SO FAR: FP2.
        fmovm.x         &0x04,-(%sp)            # save fp2

        fmov.x          %fp0,RPRIME(%a6)
        fmul.x          %fp0,%fp0               # FP0 IS S = R*R

        fmov.d          COSB8(%pc),%fp1         # B8
        fmov.d          SINA7(%pc),%fp2         # A7

        fmul.x          %fp0,%fp1               # SB8
        fmov.x          %fp0,SPRIME(%a6)
        fmul.x          %fp0,%fp2               # SA7

        ror.l           &1,%d1
        and.l           &0x80000000,%d1

        fadd.d          COSB7(%pc),%fp1         # B7+SB8
        fadd.d          SINA6(%pc),%fp2         # A6+SA7

        eor.l           %d1,RPRIME(%a6)
        eor.l           %d1,SPRIME(%a6)

        fmul.x          %fp0,%fp1               # S(B7+SB8)

        or.l            &0x3F800000,%d1
        mov.l           %d1,POSNEG1(%a6)

        fmul.x          %fp0,%fp2               # S(A6+SA7)

        fadd.d          COSB6(%pc),%fp1         # B6+S(B7+SB8)
        fadd.d          SINA5(%pc),%fp2         # A5+S(A6+SA7)

        fmul.x          %fp0,%fp1               # S(B6+S(B7+SB8))
        fmul.x          %fp0,%fp2               # S(A5+S(A6+SA7))

        fadd.d          COSB5(%pc),%fp1         # B5+S(B6+S(B7+SB8))
        fadd.d          SINA4(%pc),%fp2         # A4+S(A5+S(A6+SA7))

        fmul.x          %fp0,%fp1               # S(B5+...)
        fmul.x          %fp0,%fp2               # S(A4+...)

        fadd.d          COSB4(%pc),%fp1         # B4+S(B5+...)
        fadd.d          SINA3(%pc),%fp2         # A3+S(A4+...)

        fmul.x          %fp0,%fp1               # S(B4+...)
        fmul.x          %fp0,%fp2               # S(A3+...)

        fadd.x          COSB3(%pc),%fp1         # B3+S(B4+...)
        fadd.x          SINA2(%pc),%fp2         # A2+S(A3+...)

        fmul.x          %fp0,%fp1               # S(B3+...)
        fmul.x          %fp0,%fp2               # S(A2+...)

        fadd.x          COSB2(%pc),%fp1         # B2+S(B3+...)
        fadd.x          SINA1(%pc),%fp2         # A1+S(A2+...)

        fmul.x          %fp0,%fp1               # S(B2+...)
        fmul.x          %fp2,%fp0               # s(a1+...)


        fadd.s          COSB1(%pc),%fp1         # B1+S(B2...)
        fmul.x          RPRIME(%a6),%fp0        # R'S(A1+...)
        fmul.x          SPRIME(%a6),%fp1        # S'(B1+S(B2+...))

        fmovm.x         (%sp)+,&0x20            # restore fp2

        fmov.l          %d0,%fpcr
        fadd.s          POSNEG1(%a6),%fp1       # COS(X)
        bsr             sto_cos                 # store cosine result
        fadd.x          RPRIME(%a6),%fp0        # SIN(X)
        bra             t_inx2

################################################

SCBORS:
        cmp.l           %d1,&0x3FFF8000
        bgt.w           SREDUCEX

################################################

SCSM:
#       mov.w           &0x0000,XDCARE(%a6)
        fmov.s          &0x3F800000,%fp1

        fmov.l          %d0,%fpcr
        fsub.s          &0x00800000,%fp1
        bsr             sto_cos                 # store cosine result
        fmov.l          %fpcr,%d0               # d0 must have fpcr,too
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          X(%a6),%fp0
        bra             t_catch

##############################################

        global          ssincosd
#--SIN AND COS OF X FOR DENORMALIZED X
ssincosd:
        mov.l           %d0,-(%sp)              # save d0
        fmov.s          &0x3F800000,%fp1
        bsr             sto_cos                 # store cosine result
        mov.l           (%sp)+,%d0              # restore d0
        bra             t_extdnrm

############################################

#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
SREDUCEX:
        fmovm.x         &0x3c,-(%sp)            # save {fp2-fp5}
        mov.l           %d2,-(%sp)              # save d2
        fmov.s          &0x00000000,%fp1        # fp1 = 0

#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
#--there is a danger of unwanted overflow in first LOOP iteration.  In this
#--case, reduce argument by one remainder step to make subsequent reduction
#--safe.
        cmp.l           %d1,&0x7ffeffff         # is arg dangerously large?
        bne.b           SLOOP                   # no

# yes; create 2**16383*PI/2
        mov.w           &0x7ffe,FP_SCR0_EX(%a6)
        mov.l           &0xc90fdaa2,FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)

# create low half of 2**16383*PI/2 at FP_SCR1
        mov.w           &0x7fdc,FP_SCR1_EX(%a6)
        mov.l           &0x85a308d3,FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)

        ftest.x         %fp0                    # test sign of argument
        fblt.w          sred_neg

        or.b            &0x80,FP_SCR0_EX(%a6)   # positive arg
        or.b            &0x80,FP_SCR1_EX(%a6)
sred_neg:
        fadd.x          FP_SCR0(%a6),%fp0       # high part of reduction is exact
        fmov.x          %fp0,%fp1               # save high result in fp1
        fadd.x          FP_SCR1(%a6),%fp0       # low part of reduction
        fsub.x          %fp0,%fp1               # determine low component of result
        fadd.x          FP_SCR1(%a6),%fp1       # fp0/fp1 are reduced argument.

#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
#--integer quotient will be stored in N
#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
SLOOP:
        fmov.x          %fp0,INARG(%a6)         # +-2**K * F, 1 <= F < 2
        mov.w           INARG(%a6),%d1
        mov.l           %d1,%a1                 # save a copy of D0
        and.l           &0x00007FFF,%d1
        sub.l           &0x00003FFF,%d1         # d0 = K
        cmp.l           %d1,&28
        ble.b           SLASTLOOP
SCONTLOOP:
        sub.l           &27,%d1                 # d0 = L := K-27
        mov.b           &0,ENDFLAG(%a6)
        bra.b           SWORK
SLASTLOOP:
        clr.l           %d1                     # d0 = L := 0
        mov.b           &1,ENDFLAG(%a6)

SWORK:
#--FIND THE REMAINDER OF (R,r) W.R.T.   2**L * (PI/2). L IS SO CHOSEN
#--THAT INT( X * (2/PI) / 2**(L) ) < 2**29.

#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
#--2**L * (PIby2_1), 2**L * (PIby2_2)

        mov.l           &0x00003FFE,%d2         # BIASED EXP OF 2/PI
        sub.l           %d1,%d2                 # BIASED EXP OF 2**(-L)*(2/PI)

        mov.l           &0xA2F9836E,FP_SCR0_HI(%a6)
        mov.l           &0x4E44152A,FP_SCR0_LO(%a6)
        mov.w           %d2,FP_SCR0_EX(%a6)     # FP_SCR0 = 2**(-L)*(2/PI)

        fmov.x          %fp0,%fp2
        fmul.x          FP_SCR0(%a6),%fp2       # fp2 = X * 2**(-L)*(2/PI)

#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
#--FLOATING POINT FORMAT, THE TWO FMOVE'S       FMOVE.L FP <--> N
#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
#--(SIGN(INARG)*2**63   +       FP2) - SIGN(INARG)*2**63 WILL GIVE
#--US THE DESIRED VALUE IN FLOATING POINT.
        mov.l           %a1,%d2
        swap            %d2
        and.l           &0x80000000,%d2
        or.l            &0x5F000000,%d2         # d2 = SIGN(INARG)*2**63 IN SGL
        mov.l           %d2,TWOTO63(%a6)
        fadd.s          TWOTO63(%a6),%fp2       # THE FRACTIONAL PART OF FP1 IS ROUNDED
        fsub.s          TWOTO63(%a6),%fp2       # fp2 = N
#       fint.x          %fp2

#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
        mov.l           %d1,%d2                 # d2 = L

        add.l           &0x00003FFF,%d2         # BIASED EXP OF 2**L * (PI/2)
        mov.w           %d2,FP_SCR0_EX(%a6)
        mov.l           &0xC90FDAA2,FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)         # FP_SCR0 = 2**(L) * Piby2_1

        add.l           &0x00003FDD,%d1
        mov.w           %d1,FP_SCR1_EX(%a6)
        mov.l           &0x85A308D3,FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)         # FP_SCR1 = 2**(L) * Piby2_2

        mov.b           ENDFLAG(%a6),%d1

#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
#--P2 = 2**(L) * Piby2_2
        fmov.x          %fp2,%fp4               # fp4 = N
        fmul.x          FP_SCR0(%a6),%fp4       # fp4 = W = N*P1
        fmov.x          %fp2,%fp5               # fp5 = N
        fmul.x          FP_SCR1(%a6),%fp5       # fp5 = w = N*P2
        fmov.x          %fp4,%fp3               # fp3 = W = N*P1

#--we want P+p = W+w  but  |p| <= half ulp of P
#--Then, we need to compute  A := R-P   and  a := r-p
        fadd.x          %fp5,%fp3               # fp3 = P
        fsub.x          %fp3,%fp4               # fp4 = W-P

        fsub.x          %fp3,%fp0               # fp0 = A := R - P
        fadd.x          %fp5,%fp4               # fp4 = p = (W-P)+w

        fmov.x          %fp0,%fp3               # fp3 = A
        fsub.x          %fp4,%fp1               # fp1 = a := r - p

#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
#--|r| <= half ulp of R.
        fadd.x          %fp1,%fp0               # fp0 = R := A+a
#--No need to calculate r if this is the last loop
        cmp.b           %d1,&0
        bgt.w           SRESTORE

#--Need to calculate r
        fsub.x          %fp0,%fp3               # fp3 = A-R
        fadd.x          %fp3,%fp1               # fp1 = r := (A-R)+a
        bra.w           SLOOP

SRESTORE:
        fmov.l          %fp2,INT(%a6)
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         (%sp)+,&0x3c            # restore {fp2-fp5}

        mov.l           ADJN(%a6),%d1
        cmp.l           %d1,&4

        blt.w           SINCONT
        bra.w           SCCONT

#########################################################################
# stan():  computes the tangent of a normalized input                   #
# stand(): computes the tangent of a denormalized input                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = tan(X)                                                    #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulp in 64 significant bit, i.e. #
#       within 0.5001 ulp to 53 bits if the result is subsequently      #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.                   #
#                                                                       #
#       2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let        #
#               k = N mod 2, so in particular, k = 0 or 1.              #
#                                                                       #
#       3. If k is odd, go to 5.                                        #
#                                                                       #
#       4. (k is even) Tan(X) = tan(r) and tan(r) is approximated by a  #
#               rational function U/V where                             #
#               U = r + r*s*(P1 + s*(P2 + s*P3)), and                   #
#               V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))),  s = r*r.      #
#               Exit.                                                   #
#                                                                       #
#       4. (k is odd) Tan(X) = -cot(r). Since tan(r) is approximated by #
#               a rational function U/V where                           #
#               U = r + r*s*(P1 + s*(P2 + s*P3)), and                   #
#               V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r,       #
#               -Cot(r) = -V/U. Exit.                                   #
#                                                                       #
#       6. If |X| > 1, go to 8.                                         #
#                                                                       #
#       7. (|X|<2**(-40)) Tan(X) = X. Exit.                             #
#                                                                       #
#       8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back   #
#               to 2.                                                   #
#                                                                       #
#########################################################################

TANQ4:
        long            0x3EA0B759,0xF50F8688
TANP3:
        long            0xBEF2BAA5,0xA8924F04

TANQ3:
        long            0xBF346F59,0xB39BA65F,0x00000000,0x00000000

TANP2:
        long            0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000

TANQ2:
        long            0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000

TANP1:
        long            0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000

TANQ1:
        long            0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000

INVTWOPI:
        long            0x3FFC0000,0xA2F9836E,0x4E44152A,0x00000000

TWOPI1:
        long            0x40010000,0xC90FDAA2,0x00000000,0x00000000
TWOPI2:
        long            0x3FDF0000,0x85A308D4,0x00000000,0x00000000

#--N*PI/2, -32 <= N <= 32, IN A LEADING TERM IN EXT. AND TRAILING
#--TERM IN SGL. NOTE THAT PI IS 64-BIT LONG, THUS N*PI/2 IS AT
#--MOST 69 BITS LONG.
#       global          PITBL
PITBL:
        long            0xC0040000,0xC90FDAA2,0x2168C235,0x21800000
        long            0xC0040000,0xC2C75BCD,0x105D7C23,0xA0D00000
        long            0xC0040000,0xBC7EDCF7,0xFF523611,0xA1E80000
        long            0xC0040000,0xB6365E22,0xEE46F000,0x21480000
        long            0xC0040000,0xAFEDDF4D,0xDD3BA9EE,0xA1200000
        long            0xC0040000,0xA9A56078,0xCC3063DD,0x21FC0000
        long            0xC0040000,0xA35CE1A3,0xBB251DCB,0x21100000
        long            0xC0040000,0x9D1462CE,0xAA19D7B9,0xA1580000
        long            0xC0040000,0x96CBE3F9,0x990E91A8,0x21E00000
        long            0xC0040000,0x90836524,0x88034B96,0x20B00000
        long            0xC0040000,0x8A3AE64F,0x76F80584,0xA1880000
        long            0xC0040000,0x83F2677A,0x65ECBF73,0x21C40000
        long            0xC0030000,0xFB53D14A,0xA9C2F2C2,0x20000000
        long            0xC0030000,0xEEC2D3A0,0x87AC669F,0x21380000
        long            0xC0030000,0xE231D5F6,0x6595DA7B,0xA1300000
        long            0xC0030000,0xD5A0D84C,0x437F4E58,0x9FC00000
        long            0xC0030000,0xC90FDAA2,0x2168C235,0x21000000
        long            0xC0030000,0xBC7EDCF7,0xFF523611,0xA1680000
        long            0xC0030000,0xAFEDDF4D,0xDD3BA9EE,0xA0A00000
        long            0xC0030000,0xA35CE1A3,0xBB251DCB,0x20900000
        long            0xC0030000,0x96CBE3F9,0x990E91A8,0x21600000
        long            0xC0030000,0x8A3AE64F,0x76F80584,0xA1080000
        long            0xC0020000,0xFB53D14A,0xA9C2F2C2,0x1F800000
        long            0xC0020000,0xE231D5F6,0x6595DA7B,0xA0B00000
        long            0xC0020000,0xC90FDAA2,0x2168C235,0x20800000
        long            0xC0020000,0xAFEDDF4D,0xDD3BA9EE,0xA0200000
        long            0xC0020000,0x96CBE3F9,0x990E91A8,0x20E00000
        long            0xC0010000,0xFB53D14A,0xA9C2F2C2,0x1F000000
        long            0xC0010000,0xC90FDAA2,0x2168C235,0x20000000
        long            0xC0010000,0x96CBE3F9,0x990E91A8,0x20600000
        long            0xC0000000,0xC90FDAA2,0x2168C235,0x1F800000
        long            0xBFFF0000,0xC90FDAA2,0x2168C235,0x1F000000
        long            0x00000000,0x00000000,0x00000000,0x00000000
        long            0x3FFF0000,0xC90FDAA2,0x2168C235,0x9F000000
        long            0x40000000,0xC90FDAA2,0x2168C235,0x9F800000
        long            0x40010000,0x96CBE3F9,0x990E91A8,0xA0600000
        long            0x40010000,0xC90FDAA2,0x2168C235,0xA0000000
        long            0x40010000,0xFB53D14A,0xA9C2F2C2,0x9F000000
        long            0x40020000,0x96CBE3F9,0x990E91A8,0xA0E00000
        long            0x40020000,0xAFEDDF4D,0xDD3BA9EE,0x20200000
        long            0x40020000,0xC90FDAA2,0x2168C235,0xA0800000
        long            0x40020000,0xE231D5F6,0x6595DA7B,0x20B00000
        long            0x40020000,0xFB53D14A,0xA9C2F2C2,0x9F800000
        long            0x40030000,0x8A3AE64F,0x76F80584,0x21080000
        long            0x40030000,0x96CBE3F9,0x990E91A8,0xA1600000
        long            0x40030000,0xA35CE1A3,0xBB251DCB,0xA0900000
        long            0x40030000,0xAFEDDF4D,0xDD3BA9EE,0x20A00000
        long            0x40030000,0xBC7EDCF7,0xFF523611,0x21680000
        long            0x40030000,0xC90FDAA2,0x2168C235,0xA1000000
        long            0x40030000,0xD5A0D84C,0x437F4E58,0x1FC00000
        long            0x40030000,0xE231D5F6,0x6595DA7B,0x21300000
        long            0x40030000,0xEEC2D3A0,0x87AC669F,0xA1380000
        long            0x40030000,0xFB53D14A,0xA9C2F2C2,0xA0000000
        long            0x40040000,0x83F2677A,0x65ECBF73,0xA1C40000
        long            0x40040000,0x8A3AE64F,0x76F80584,0x21880000
        long            0x40040000,0x90836524,0x88034B96,0xA0B00000
        long            0x40040000,0x96CBE3F9,0x990E91A8,0xA1E00000
        long            0x40040000,0x9D1462CE,0xAA19D7B9,0x21580000
        long            0x40040000,0xA35CE1A3,0xBB251DCB,0xA1100000
        long            0x40040000,0xA9A56078,0xCC3063DD,0xA1FC0000
        long            0x40040000,0xAFEDDF4D,0xDD3BA9EE,0x21200000
        long            0x40040000,0xB6365E22,0xEE46F000,0xA1480000
        long            0x40040000,0xBC7EDCF7,0xFF523611,0x21E80000
        long            0x40040000,0xC2C75BCD,0x105D7C23,0x20D00000
        long            0x40040000,0xC90FDAA2,0x2168C235,0xA1800000

        set             INARG,FP_SCR0

        set             TWOTO63,L_SCR1
        set             INT,L_SCR1
        set             ENDFLAG,L_SCR2

        global          stan
stan:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1

        cmp.l           %d1,&0x3FD78000         # |X| >= 2**(-40)?
        bge.b           TANOK1
        bra.w           TANSM
TANOK1:
        cmp.l           %d1,&0x4004BC7E         # |X| < 15 PI?
        blt.b           TANMAIN
        bra.w           REDUCEX

TANMAIN:
#--THIS IS THE USUAL CASE, |X| <= 15 PI.
#--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
        fmov.x          %fp0,%fp1
        fmul.d          TWOBYPI(%pc),%fp1       # X*2/PI

        lea.l           PITBL+0x200(%pc),%a1    # TABLE OF N*PI/2, N = -32,...,32

        fmov.l          %fp1,%d1                # CONVERT TO INTEGER

        asl.l           &4,%d1
        add.l           %d1,%a1                 # ADDRESS N*PIBY2 IN Y1, Y2

        fsub.x          (%a1)+,%fp0             # X-Y1

        fsub.s          (%a1),%fp0              # FP0 IS R = (X-Y1)-Y2

        ror.l           &5,%d1
        and.l           &0x80000000,%d1         # D0 WAS ODD IFF D0 < 0

TANCONT:
        fmovm.x         &0x0c,-(%sp)            # save fp2,fp3

        cmp.l           %d1,&0
        blt.w           NODD

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # S = R*R

        fmov.d          TANQ4(%pc),%fp3
        fmov.d          TANP3(%pc),%fp2

        fmul.x          %fp1,%fp3               # SQ4
        fmul.x          %fp1,%fp2               # SP3

        fadd.d          TANQ3(%pc),%fp3         # Q3+SQ4
        fadd.x          TANP2(%pc),%fp2         # P2+SP3

        fmul.x          %fp1,%fp3               # S(Q3+SQ4)
        fmul.x          %fp1,%fp2               # S(P2+SP3)

        fadd.x          TANQ2(%pc),%fp3         # Q2+S(Q3+SQ4)
        fadd.x          TANP1(%pc),%fp2         # P1+S(P2+SP3)

        fmul.x          %fp1,%fp3               # S(Q2+S(Q3+SQ4))
        fmul.x          %fp1,%fp2               # S(P1+S(P2+SP3))

        fadd.x          TANQ1(%pc),%fp3         # Q1+S(Q2+S(Q3+SQ4))
        fmul.x          %fp0,%fp2               # RS(P1+S(P2+SP3))

        fmul.x          %fp3,%fp1               # S(Q1+S(Q2+S(Q3+SQ4)))

        fadd.x          %fp2,%fp0               # R+RS(P1+S(P2+SP3))

        fadd.s          &0x3F800000,%fp1        # 1+S(Q1+...)

        fmovm.x         (%sp)+,&0x30            # restore fp2,fp3

        fmov.l          %d0,%fpcr               # restore users round mode,prec
        fdiv.x          %fp1,%fp0               # last inst - possible exception set
        bra             t_inx2

NODD:
        fmov.x          %fp0,%fp1
        fmul.x          %fp0,%fp0               # S = R*R

        fmov.d          TANQ4(%pc),%fp3
        fmov.d          TANP3(%pc),%fp2

        fmul.x          %fp0,%fp3               # SQ4
        fmul.x          %fp0,%fp2               # SP3

        fadd.d          TANQ3(%pc),%fp3         # Q3+SQ4
        fadd.x          TANP2(%pc),%fp2         # P2+SP3

        fmul.x          %fp0,%fp3               # S(Q3+SQ4)
        fmul.x          %fp0,%fp2               # S(P2+SP3)

        fadd.x          TANQ2(%pc),%fp3         # Q2+S(Q3+SQ4)
        fadd.x          TANP1(%pc),%fp2         # P1+S(P2+SP3)

        fmul.x          %fp0,%fp3               # S(Q2+S(Q3+SQ4))
        fmul.x          %fp0,%fp2               # S(P1+S(P2+SP3))

        fadd.x          TANQ1(%pc),%fp3         # Q1+S(Q2+S(Q3+SQ4))
        fmul.x          %fp1,%fp2               # RS(P1+S(P2+SP3))

        fmul.x          %fp3,%fp0               # S(Q1+S(Q2+S(Q3+SQ4)))

        fadd.x          %fp2,%fp1               # R+RS(P1+S(P2+SP3))
        fadd.s          &0x3F800000,%fp0        # 1+S(Q1+...)

        fmovm.x         (%sp)+,&0x30            # restore fp2,fp3

        fmov.x          %fp1,-(%sp)
        eor.l           &0x80000000,(%sp)

        fmov.l          %d0,%fpcr               # restore users round mode,prec
        fdiv.x          (%sp)+,%fp0             # last inst - possible exception set
        bra             t_inx2

TANBORS:
#--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
#--IF |X| < 2**(-40), RETURN X OR 1.
        cmp.l           %d1,&0x3FFF8000
        bgt.b           REDUCEX

TANSM:
        fmov.x          %fp0,-(%sp)
        fmov.l          %d0,%fpcr               # restore users round mode,prec
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          (%sp)+,%fp0             # last inst - posibble exception set
        bra             t_catch

        global          stand
#--TAN(X) = X FOR DENORMALIZED X
stand:
        bra             t_extdnrm

#--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
#--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
#--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
REDUCEX:
        fmovm.x         &0x3c,-(%sp)            # save {fp2-fp5}
        mov.l           %d2,-(%sp)              # save d2
        fmov.s          &0x00000000,%fp1        # fp1 = 0

#--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
#--there is a danger of unwanted overflow in first LOOP iteration.  In this
#--case, reduce argument by one remainder step to make subsequent reduction
#--safe.
        cmp.l           %d1,&0x7ffeffff         # is arg dangerously large?
        bne.b           LOOP                    # no

# yes; create 2**16383*PI/2
        mov.w           &0x7ffe,FP_SCR0_EX(%a6)
        mov.l           &0xc90fdaa2,FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)

# create low half of 2**16383*PI/2 at FP_SCR1
        mov.w           &0x7fdc,FP_SCR1_EX(%a6)
        mov.l           &0x85a308d3,FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)

        ftest.x         %fp0                    # test sign of argument
        fblt.w          red_neg

        or.b            &0x80,FP_SCR0_EX(%a6)   # positive arg
        or.b            &0x80,FP_SCR1_EX(%a6)
red_neg:
        fadd.x          FP_SCR0(%a6),%fp0       # high part of reduction is exact
        fmov.x          %fp0,%fp1               # save high result in fp1
        fadd.x          FP_SCR1(%a6),%fp0       # low part of reduction
        fsub.x          %fp0,%fp1               # determine low component of result
        fadd.x          FP_SCR1(%a6),%fp1       # fp0/fp1 are reduced argument.

#--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
#--integer quotient will be stored in N
#--Intermeditate remainder is 66-bit long; (R,r) in (FP0,FP1)
LOOP:
        fmov.x          %fp0,INARG(%a6)         # +-2**K * F, 1 <= F < 2
        mov.w           INARG(%a6),%d1
        mov.l           %d1,%a1                 # save a copy of D0
        and.l           &0x00007FFF,%d1
        sub.l           &0x00003FFF,%d1         # d0 = K
        cmp.l           %d1,&28
        ble.b           LASTLOOP
CONTLOOP:
        sub.l           &27,%d1                 # d0 = L := K-27
        mov.b           &0,ENDFLAG(%a6)
        bra.b           WORK
LASTLOOP:
        clr.l           %d1                     # d0 = L := 0
        mov.b           &1,ENDFLAG(%a6)

WORK:
#--FIND THE REMAINDER OF (R,r) W.R.T.   2**L * (PI/2). L IS SO CHOSEN
#--THAT INT( X * (2/PI) / 2**(L) ) < 2**29.

#--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
#--2**L * (PIby2_1), 2**L * (PIby2_2)

        mov.l           &0x00003FFE,%d2         # BIASED EXP OF 2/PI
        sub.l           %d1,%d2                 # BIASED EXP OF 2**(-L)*(2/PI)

        mov.l           &0xA2F9836E,FP_SCR0_HI(%a6)
        mov.l           &0x4E44152A,FP_SCR0_LO(%a6)
        mov.w           %d2,FP_SCR0_EX(%a6)     # FP_SCR0 = 2**(-L)*(2/PI)

        fmov.x          %fp0,%fp2
        fmul.x          FP_SCR0(%a6),%fp2       # fp2 = X * 2**(-L)*(2/PI)

#--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
#--FLOATING POINT FORMAT, THE TWO FMOVE'S       FMOVE.L FP <--> N
#--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
#--(SIGN(INARG)*2**63   +       FP2) - SIGN(INARG)*2**63 WILL GIVE
#--US THE DESIRED VALUE IN FLOATING POINT.
        mov.l           %a1,%d2
        swap            %d2
        and.l           &0x80000000,%d2
        or.l            &0x5F000000,%d2         # d2 = SIGN(INARG)*2**63 IN SGL
        mov.l           %d2,TWOTO63(%a6)
        fadd.s          TWOTO63(%a6),%fp2       # THE FRACTIONAL PART OF FP1 IS ROUNDED
        fsub.s          TWOTO63(%a6),%fp2       # fp2 = N
#       fintrz.x        %fp2,%fp2

#--CREATING 2**(L)*Piby2_1 and 2**(L)*Piby2_2
        mov.l           %d1,%d2                 # d2 = L

        add.l           &0x00003FFF,%d2         # BIASED EXP OF 2**L * (PI/2)
        mov.w           %d2,FP_SCR0_EX(%a6)
        mov.l           &0xC90FDAA2,FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)         # FP_SCR0 = 2**(L) * Piby2_1

        add.l           &0x00003FDD,%d1
        mov.w           %d1,FP_SCR1_EX(%a6)
        mov.l           &0x85A308D3,FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)         # FP_SCR1 = 2**(L) * Piby2_2

        mov.b           ENDFLAG(%a6),%d1

#--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
#--P2 = 2**(L) * Piby2_2
        fmov.x          %fp2,%fp4               # fp4 = N
        fmul.x          FP_SCR0(%a6),%fp4       # fp4 = W = N*P1
        fmov.x          %fp2,%fp5               # fp5 = N
        fmul.x          FP_SCR1(%a6),%fp5       # fp5 = w = N*P2
        fmov.x          %fp4,%fp3               # fp3 = W = N*P1

#--we want P+p = W+w  but  |p| <= half ulp of P
#--Then, we need to compute  A := R-P   and  a := r-p
        fadd.x          %fp5,%fp3               # fp3 = P
        fsub.x          %fp3,%fp4               # fp4 = W-P

        fsub.x          %fp3,%fp0               # fp0 = A := R - P
        fadd.x          %fp5,%fp4               # fp4 = p = (W-P)+w

        fmov.x          %fp0,%fp3               # fp3 = A
        fsub.x          %fp4,%fp1               # fp1 = a := r - p

#--Now we need to normalize (A,a) to  "new (R,r)" where R+r = A+a but
#--|r| <= half ulp of R.
        fadd.x          %fp1,%fp0               # fp0 = R := A+a
#--No need to calculate r if this is the last loop
        cmp.b           %d1,&0
        bgt.w           RESTORE

#--Need to calculate r
        fsub.x          %fp0,%fp3               # fp3 = A-R
        fadd.x          %fp3,%fp1               # fp1 = r := (A-R)+a
        bra.w           LOOP

RESTORE:
        fmov.l          %fp2,INT(%a6)
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         (%sp)+,&0x3c            # restore {fp2-fp5}

        mov.l           INT(%a6),%d1
        ror.l           &1,%d1

        bra.w           TANCONT

#########################################################################
# satan():  computes the arctangent of a normalized number              #
# satand(): computes the arctangent of a denormalized number            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = arctan(X)                                                 #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 2 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Step 1. If |X| >= 16 or |X| < 1/16, go to Step 5.               #
#                                                                       #
#       Step 2. Let X = sgn * 2**k * 1.xxxxxxxx...x.                    #
#               Note that k = -4, -3,..., or 3.                         #
#               Define F = sgn * 2**k * 1.xxxx1, i.e. the first 5       #
#               significant bits of X with a bit-1 attached at the 6-th #
#               bit position. Define u to be u = (X-F) / (1 + X*F).     #
#                                                                       #
#       Step 3. Approximate arctan(u) by a polynomial poly.             #
#                                                                       #
#       Step 4. Return arctan(F) + poly, arctan(F) is fetched from a    #
#               table of values calculated beforehand. Exit.            #
#                                                                       #
#       Step 5. If |X| >= 16, go to Step 7.                             #
#                                                                       #
#       Step 6. Approximate arctan(X) by an odd polynomial in X. Exit.  #
#                                                                       #
#       Step 7. Define X' = -1/X. Approximate arctan(X') by an odd      #
#               polynomial in X'.                                       #
#               Arctan(X) = sign(X)*Pi/2 + arctan(X'). Exit.            #
#                                                                       #
#########################################################################

ATANA3: long            0xBFF6687E,0x314987D8
ATANA2: long            0x4002AC69,0x34A26DB3
ATANA1: long            0xBFC2476F,0x4E1DA28E

ATANB6: long            0x3FB34444,0x7F876989
ATANB5: long            0xBFB744EE,0x7FAF45DB
ATANB4: long            0x3FBC71C6,0x46940220
ATANB3: long            0xBFC24924,0x921872F9
ATANB2: long            0x3FC99999,0x99998FA9
ATANB1: long            0xBFD55555,0x55555555

ATANC5: long            0xBFB70BF3,0x98539E6A
ATANC4: long            0x3FBC7187,0x962D1D7D
ATANC3: long            0xBFC24924,0x827107B8
ATANC2: long            0x3FC99999,0x9996263E
ATANC1: long            0xBFD55555,0x55555536

PPIBY2: long            0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000
NPIBY2: long            0xBFFF0000,0xC90FDAA2,0x2168C235,0x00000000

PTINY:  long            0x00010000,0x80000000,0x00000000,0x00000000
NTINY:  long            0x80010000,0x80000000,0x00000000,0x00000000

ATANTBL:
        long            0x3FFB0000,0x83D152C5,0x060B7A51,0x00000000
        long            0x3FFB0000,0x8BC85445,0x65498B8B,0x00000000
        long            0x3FFB0000,0x93BE4060,0x17626B0D,0x00000000
        long            0x3FFB0000,0x9BB3078D,0x35AEC202,0x00000000
        long            0x3FFB0000,0xA3A69A52,0x5DDCE7DE,0x00000000
        long            0x3FFB0000,0xAB98E943,0x62765619,0x00000000
        long            0x3FFB0000,0xB389E502,0xF9C59862,0x00000000
        long            0x3FFB0000,0xBB797E43,0x6B09E6FB,0x00000000
        long            0x3FFB0000,0xC367A5C7,0x39E5F446,0x00000000
        long            0x3FFB0000,0xCB544C61,0xCFF7D5C6,0x00000000
        long            0x3FFB0000,0xD33F62F8,0x2488533E,0x00000000
        long            0x3FFB0000,0xDB28DA81,0x62404C77,0x00000000
        long            0x3FFB0000,0xE310A407,0x8AD34F18,0x00000000
        long            0x3FFB0000,0xEAF6B0A8,0x188EE1EB,0x00000000
        long            0x3FFB0000,0xF2DAF194,0x9DBE79D5,0x00000000
        long            0x3FFB0000,0xFABD5813,0x61D47E3E,0x00000000
        long            0x3FFC0000,0x8346AC21,0x0959ECC4,0x00000000
        long            0x3FFC0000,0x8B232A08,0x304282D8,0x00000000
        long            0x3FFC0000,0x92FB70B8,0xD29AE2F9,0x00000000
        long            0x3FFC0000,0x9ACF476F,0x5CCD1CB4,0x00000000
        long            0x3FFC0000,0xA29E7630,0x4954F23F,0x00000000
        long            0x3FFC0000,0xAA68C5D0,0x8AB85230,0x00000000
        long            0x3FFC0000,0xB22DFFFD,0x9D539F83,0x00000000
        long            0x3FFC0000,0xB9EDEF45,0x3E900EA5,0x00000000
        long            0x3FFC0000,0xC1A85F1C,0xC75E3EA5,0x00000000
        long            0x3FFC0000,0xC95D1BE8,0x28138DE6,0x00000000
        long            0x3FFC0000,0xD10BF300,0x840D2DE4,0x00000000
        long            0x3FFC0000,0xD8B4B2BA,0x6BC05E7A,0x00000000
        long            0x3FFC0000,0xE0572A6B,0xB42335F6,0x00000000
        long            0x3FFC0000,0xE7F32A70,0xEA9CAA8F,0x00000000
        long            0x3FFC0000,0xEF888432,0x64ECEFAA,0x00000000
        long            0x3FFC0000,0xF7170A28,0xECC06666,0x00000000
        long            0x3FFD0000,0x812FD288,0x332DAD32,0x00000000
        long            0x3FFD0000,0x88A8D1B1,0x218E4D64,0x00000000
        long            0x3FFD0000,0x9012AB3F,0x23E4AEE8,0x00000000
        long            0x3FFD0000,0x976CC3D4,0x11E7F1B9,0x00000000
        long            0x3FFD0000,0x9EB68949,0x3889A227,0x00000000
        long            0x3FFD0000,0xA5EF72C3,0x4487361B,0x00000000
        long            0x3FFD0000,0xAD1700BA,0xF07A7227,0x00000000
        long            0x3FFD0000,0xB42CBCFA,0xFD37EFB7,0x00000000
        long            0x3FFD0000,0xBB303A94,0x0BA80F89,0x00000000
        long            0x3FFD0000,0xC22115C6,0xFCAEBBAF,0x00000000
        long            0x3FFD0000,0xC8FEF3E6,0x86331221,0x00000000
        long            0x3FFD0000,0xCFC98330,0xB4000C70,0x00000000
        long            0x3FFD0000,0xD6807AA1,0x102C5BF9,0x00000000
        long            0x3FFD0000,0xDD2399BC,0x31252AA3,0x00000000
        long            0x3FFD0000,0xE3B2A855,0x6B8FC517,0x00000000
        long            0x3FFD0000,0xEA2D764F,0x64315989,0x00000000
        long            0x3FFD0000,0xF3BF5BF8,0xBAD1A21D,0x00000000
        long            0x3FFE0000,0x801CE39E,0x0D205C9A,0x00000000
        long            0x3FFE0000,0x8630A2DA,0xDA1ED066,0x00000000
        long            0x3FFE0000,0x8C1AD445,0xF3E09B8C,0x00000000
        long            0x3FFE0000,0x91DB8F16,0x64F350E2,0x00000000
        long            0x3FFE0000,0x97731420,0x365E538C,0x00000000
        long            0x3FFE0000,0x9CE1C8E6,0xA0B8CDBA,0x00000000
        long            0x3FFE0000,0xA22832DB,0xCADAAE09,0x00000000
        long            0x3FFE0000,0xA746F2DD,0xB7602294,0x00000000
        long            0x3FFE0000,0xAC3EC0FB,0x997DD6A2,0x00000000
        long            0x3FFE0000,0xB110688A,0xEBDC6F6A,0x00000000
        long            0x3FFE0000,0xB5BCC490,0x59ECC4B0,0x00000000
        long            0x3FFE0000,0xBA44BC7D,0xD470782F,0x00000000
        long            0x3FFE0000,0xBEA94144,0xFD049AAC,0x00000000
        long            0x3FFE0000,0xC2EB4ABB,0x661628B6,0x00000000
        long            0x3FFE0000,0xC70BD54C,0xE602EE14,0x00000000
        long            0x3FFE0000,0xCD000549,0xADEC7159,0x00000000
        long            0x3FFE0000,0xD48457D2,0xD8EA4EA3,0x00000000
        long            0x3FFE0000,0xDB948DA7,0x12DECE3B,0x00000000
        long            0x3FFE0000,0xE23855F9,0x69E8096A,0x00000000
        long            0x3FFE0000,0xE8771129,0xC4353259,0x00000000
        long            0x3FFE0000,0xEE57C16E,0x0D379C0D,0x00000000
        long            0x3FFE0000,0xF3E10211,0xA87C3779,0x00000000
        long            0x3FFE0000,0xF919039D,0x758B8D41,0x00000000
        long            0x3FFE0000,0xFE058B8F,0x64935FB3,0x00000000
        long            0x3FFF0000,0x8155FB49,0x7B685D04,0x00000000
        long            0x3FFF0000,0x83889E35,0x49D108E1,0x00000000
        long            0x3FFF0000,0x859CFA76,0x511D724B,0x00000000
        long            0x3FFF0000,0x87952ECF,0xFF8131E7,0x00000000
        long            0x3FFF0000,0x89732FD1,0x9557641B,0x00000000
        long            0x3FFF0000,0x8B38CAD1,0x01932A35,0x00000000
        long            0x3FFF0000,0x8CE7A8D8,0x301EE6B5,0x00000000
        long            0x3FFF0000,0x8F46A39E,0x2EAE5281,0x00000000
        long            0x3FFF0000,0x922DA7D7,0x91888487,0x00000000
        long            0x3FFF0000,0x94D19FCB,0xDEDF5241,0x00000000
        long            0x3FFF0000,0x973AB944,0x19D2A08B,0x00000000
        long            0x3FFF0000,0x996FF00E,0x08E10B96,0x00000000
        long            0x3FFF0000,0x9B773F95,0x12321DA7,0x00000000
        long            0x3FFF0000,0x9D55CC32,0x0F935624,0x00000000
        long            0x3FFF0000,0x9F100575,0x006CC571,0x00000000
        long            0x3FFF0000,0xA0A9C290,0xD97CC06C,0x00000000
        long            0x3FFF0000,0xA22659EB,0xEBC0630A,0x00000000
        long            0x3FFF0000,0xA388B4AF,0xF6EF0EC9,0x00000000
        long            0x3FFF0000,0xA4D35F10,0x61D292C4,0x00000000
        long            0x3FFF0000,0xA60895DC,0xFBE3187E,0x00000000
        long            0x3FFF0000,0xA72A51DC,0x7367BEAC,0x00000000
        long            0x3FFF0000,0xA83A5153,0x0956168F,0x00000000
        long            0x3FFF0000,0xA93A2007,0x7539546E,0x00000000
        long            0x3FFF0000,0xAA9E7245,0x023B2605,0x00000000
        long            0x3FFF0000,0xAC4C84BA,0x6FE4D58F,0x00000000
        long            0x3FFF0000,0xADCE4A4A,0x606B9712,0x00000000
        long            0x3FFF0000,0xAF2A2DCD,0x8D263C9C,0x00000000
        long            0x3FFF0000,0xB0656F81,0xF22265C7,0x00000000
        long            0x3FFF0000,0xB1846515,0x0F71496A,0x00000000
        long            0x3FFF0000,0xB28AAA15,0x6F9ADA35,0x00000000
        long            0x3FFF0000,0xB37B44FF,0x3766B895,0x00000000
        long            0x3FFF0000,0xB458C3DC,0xE9630433,0x00000000
        long            0x3FFF0000,0xB525529D,0x562246BD,0x00000000
        long            0x3FFF0000,0xB5E2CCA9,0x5F9D88CC,0x00000000
        long            0x3FFF0000,0xB692CADA,0x7ACA1ADA,0x00000000
        long            0x3FFF0000,0xB736AEA7,0xA6925838,0x00000000
        long            0x3FFF0000,0xB7CFAB28,0x7E9F7B36,0x00000000
        long            0x3FFF0000,0xB85ECC66,0xCB219835,0x00000000
        long            0x3FFF0000,0xB8E4FD5A,0x20A593DA,0x00000000
        long            0x3FFF0000,0xB99F41F6,0x4AFF9BB5,0x00000000
        long            0x3FFF0000,0xBA7F1E17,0x842BBE7B,0x00000000
        long            0x3FFF0000,0xBB471285,0x7637E17D,0x00000000
        long            0x3FFF0000,0xBBFABE8A,0x4788DF6F,0x00000000
        long            0x3FFF0000,0xBC9D0FAD,0x2B689D79,0x00000000
        long            0x3FFF0000,0xBD306A39,0x471ECD86,0x00000000
        long            0x3FFF0000,0xBDB6C731,0x856AF18A,0x00000000
        long            0x3FFF0000,0xBE31CAC5,0x02E80D70,0x00000000
        long            0x3FFF0000,0xBEA2D55C,0xE33194E2,0x00000000
        long            0x3FFF0000,0xBF0B10B7,0xC03128F0,0x00000000
        long            0x3FFF0000,0xBF6B7A18,0xDACB778D,0x00000000
        long            0x3FFF0000,0xBFC4EA46,0x63FA18F6,0x00000000
        long            0x3FFF0000,0xC0181BDE,0x8B89A454,0x00000000
        long            0x3FFF0000,0xC065B066,0xCFBF6439,0x00000000
        long            0x3FFF0000,0xC0AE345F,0x56340AE6,0x00000000
        long            0x3FFF0000,0xC0F22291,0x9CB9E6A7,0x00000000

        set             X,FP_SCR0
        set             XDCARE,X+2
        set             XFRAC,X+4
        set             XFRACLO,X+8

        set             ATANF,FP_SCR1
        set             ATANFHI,ATANF+4
        set             ATANFLO,ATANF+8

        global          satan
#--ENTRY POINT FOR ATAN(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
satan:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        fmov.x          %fp0,X(%a6)
        and.l           &0x7FFFFFFF,%d1

        cmp.l           %d1,&0x3FFB8000         # |X| >= 1/16?
        bge.b           ATANOK1
        bra.w           ATANSM

ATANOK1:
        cmp.l           %d1,&0x4002FFFF         # |X| < 16 ?
        ble.b           ATANMAIN
        bra.w           ATANBIG

#--THE MOST LIKELY CASE, |X| IN [1/16, 16). WE USE TABLE TECHNIQUE
#--THE IDEA IS ATAN(X) = ATAN(F) + ATAN( [X-F] / [1+XF] ).
#--SO IF F IS CHOSEN TO BE CLOSE TO X AND ATAN(F) IS STORED IN
#--A TABLE, ALL WE NEED IS TO APPROXIMATE ATAN(U) WHERE
#--U = (X-F)/(1+XF) IS SMALL (REMEMBER F IS CLOSE TO X). IT IS
#--TRUE THAT A DIVIDE IS NOW NEEDED, BUT THE APPROXIMATION FOR
#--ATAN(U) IS A VERY SHORT POLYNOMIAL AND THE INDEXING TO
#--FETCH F AND SAVING OF REGISTERS CAN BE ALL HIDED UNDER THE
#--DIVIDE. IN THE END THIS METHOD IS MUCH FASTER THAN A TRADITIONAL
#--ONE. NOTE ALSO THAT THE TRADITIONAL SCHEME THAT APPROXIMATE
#--ATAN(X) DIRECTLY WILL NEED TO USE A RATIONAL APPROXIMATION
#--(DIVISION NEEDED) ANYWAY BECAUSE A POLYNOMIAL APPROXIMATION
#--WILL INVOLVE A VERY LONG POLYNOMIAL.

#--NOW WE SEE X AS +-2^K * 1.BBBBBBB....B <- 1. + 63 BITS
#--WE CHOSE F TO BE +-2^K * 1.BBBB1
#--THAT IS IT MATCHES THE EXPONENT AND FIRST 5 BITS OF X, THE
#--SIXTH BITS IS SET TO BE 1. SINCE K = -4, -3, ..., 3, THERE
#--ARE ONLY 8 TIMES 16 = 2^7 = 128 |F|'S. SINCE ATAN(-|F|) IS
#-- -ATAN(|F|), WE NEED TO STORE ONLY ATAN(|F|).

ATANMAIN:

        and.l           &0xF8000000,XFRAC(%a6)  # FIRST 5 BITS
        or.l            &0x04000000,XFRAC(%a6)  # SET 6-TH BIT TO 1
        mov.l           &0x00000000,XFRACLO(%a6) # LOCATION OF X IS NOW F

        fmov.x          %fp0,%fp1               # FP1 IS X
        fmul.x          X(%a6),%fp1             # FP1 IS X*F, NOTE THAT X*F > 0
        fsub.x          X(%a6),%fp0             # FP0 IS X-F
        fadd.s          &0x3F800000,%fp1        # FP1 IS 1 + X*F
        fdiv.x          %fp1,%fp0               # FP0 IS U = (X-F)/(1+X*F)

#--WHILE THE DIVISION IS TAKING ITS TIME, WE FETCH ATAN(|F|)
#--CREATE ATAN(F) AND STORE IT IN ATANF, AND
#--SAVE REGISTERS FP2.

        mov.l           %d2,-(%sp)              # SAVE d2 TEMPORARILY
        mov.l           %d1,%d2                 # THE EXP AND 16 BITS OF X
        and.l           &0x00007800,%d1         # 4 VARYING BITS OF F'S FRACTION
        and.l           &0x7FFF0000,%d2         # EXPONENT OF F
        sub.l           &0x3FFB0000,%d2         # K+4
        asr.l           &1,%d2
        add.l           %d2,%d1                 # THE 7 BITS IDENTIFYING F
        asr.l           &7,%d1                  # INDEX INTO TBL OF ATAN(|F|)
        lea             ATANTBL(%pc),%a1
        add.l           %d1,%a1                 # ADDRESS OF ATAN(|F|)
        mov.l           (%a1)+,ATANF(%a6)
        mov.l           (%a1)+,ATANFHI(%a6)
        mov.l           (%a1)+,ATANFLO(%a6)     # ATANF IS NOW ATAN(|F|)
        mov.l           X(%a6),%d1              # LOAD SIGN AND EXPO. AGAIN
        and.l           &0x80000000,%d1         # SIGN(F)
        or.l            %d1,ATANF(%a6)          # ATANF IS NOW SIGN(F)*ATAN(|F|)
        mov.l           (%sp)+,%d2              # RESTORE d2

#--THAT'S ALL I HAVE TO DO FOR NOW,
#--BUT ALAS, THE DIVIDE IS STILL CRANKING!

#--U IN FP0, WE ARE NOW READY TO COMPUTE ATAN(U) AS
#--U + A1*U*V*(A2 + V*(A3 + V)), V = U*U
#--THE POLYNOMIAL MAY LOOK STRANGE, BUT IS NEVERTHELESS CORRECT.
#--THE NATURAL FORM IS U + U*V*(A1 + V*(A2 + V*A3))
#--WHAT WE HAVE HERE IS MERELY  A1 = A3, A2 = A1/A3, A3 = A2/A3.
#--THE REASON FOR THIS REARRANGEMENT IS TO MAKE THE INDEPENDENT
#--PARTS A1*U*V AND (A2 + ... STUFF) MORE LOAD-BALANCED

        fmovm.x         &0x04,-(%sp)            # save fp2

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1
        fmov.d          ATANA3(%pc),%fp2
        fadd.x          %fp1,%fp2               # A3+V
        fmul.x          %fp1,%fp2               # V*(A3+V)
        fmul.x          %fp0,%fp1               # U*V
        fadd.d          ATANA2(%pc),%fp2        # A2+V*(A3+V)
        fmul.d          ATANA1(%pc),%fp1        # A1*U*V
        fmul.x          %fp2,%fp1               # A1*U*V*(A2+V*(A3+V))
        fadd.x          %fp1,%fp0               # ATAN(U), FP1 RELEASED

        fmovm.x         (%sp)+,&0x20            # restore fp2

        fmov.l          %d0,%fpcr               # restore users rnd mode,prec
        fadd.x          ATANF(%a6),%fp0         # ATAN(X)
        bra             t_inx2

ATANBORS:
#--|X| IS IN d0 IN COMPACT FORM. FP1, d0 SAVED.
#--FP0 IS X AND |X| <= 1/16 OR |X| >= 16.
        cmp.l           %d1,&0x3FFF8000
        bgt.w           ATANBIG                 # I.E. |X| >= 16

ATANSM:
#--|X| <= 1/16
#--IF |X| < 2^(-40), RETURN X AS ANSWER. OTHERWISE, APPROXIMATE
#--ATAN(X) BY X + X*Y*(B1+Y*(B2+Y*(B3+Y*(B4+Y*(B5+Y*B6)))))
#--WHICH IS X + X*Y*( [B1+Z*(B3+Z*B5)] + [Y*(B2+Z*(B4+Z*B6)] )
#--WHERE Y = X*X, AND Z = Y*Y.

        cmp.l           %d1,&0x3FD78000
        blt.w           ATANTINY

#--COMPUTE POLYNOMIAL
        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmul.x          %fp0,%fp0               # FPO IS Y = X*X

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS Z = Y*Y

        fmov.d          ATANB6(%pc),%fp2
        fmov.d          ATANB5(%pc),%fp3

        fmul.x          %fp1,%fp2               # Z*B6
        fmul.x          %fp1,%fp3               # Z*B5

        fadd.d          ATANB4(%pc),%fp2        # B4+Z*B6
        fadd.d          ATANB3(%pc),%fp3        # B3+Z*B5

        fmul.x          %fp1,%fp2               # Z*(B4+Z*B6)
        fmul.x          %fp3,%fp1               # Z*(B3+Z*B5)

        fadd.d          ATANB2(%pc),%fp2        # B2+Z*(B4+Z*B6)
        fadd.d          ATANB1(%pc),%fp1        # B1+Z*(B3+Z*B5)

        fmul.x          %fp0,%fp2               # Y*(B2+Z*(B4+Z*B6))
        fmul.x          X(%a6),%fp0             # X*Y

        fadd.x          %fp2,%fp1               # [B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))]

        fmul.x          %fp1,%fp0               # X*Y*([B1+Z*(B3+Z*B5)]+[Y*(B2+Z*(B4+Z*B6))])

        fmovm.x         (%sp)+,&0x30            # restore fp2/fp3

        fmov.l          %d0,%fpcr               # restore users rnd mode,prec
        fadd.x          X(%a6),%fp0
        bra             t_inx2

ATANTINY:
#--|X| < 2^(-40), ATAN(X) = X

        fmov.l          %d0,%fpcr               # restore users rnd mode,prec
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          X(%a6),%fp0             # last inst - possible exception set

        bra             t_catch

ATANBIG:
#--IF |X| > 2^(100), RETURN     SIGN(X)*(PI/2 - TINY). OTHERWISE,
#--RETURN SIGN(X)*PI/2 + ATAN(-1/X).
        cmp.l           %d1,&0x40638000
        bgt.w           ATANHUGE

#--APPROXIMATE ATAN(-1/X) BY
#--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
#--THIS CAN BE RE-WRITTEN AS
#--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.

        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmov.s          &0xBF800000,%fp1        # LOAD -1
        fdiv.x          %fp0,%fp1               # FP1 IS -1/X

#--DIVIDE IS STILL CRANKING

        fmov.x          %fp1,%fp0               # FP0 IS X'
        fmul.x          %fp0,%fp0               # FP0 IS Y = X'*X'
        fmov.x          %fp1,X(%a6)             # X IS REALLY X'

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS Z = Y*Y

        fmov.d          ATANC5(%pc),%fp3
        fmov.d          ATANC4(%pc),%fp2

        fmul.x          %fp1,%fp3               # Z*C5
        fmul.x          %fp1,%fp2               # Z*B4

        fadd.d          ATANC3(%pc),%fp3        # C3+Z*C5
        fadd.d          ATANC2(%pc),%fp2        # C2+Z*C4

        fmul.x          %fp3,%fp1               # Z*(C3+Z*C5), FP3 RELEASED
        fmul.x          %fp0,%fp2               # Y*(C2+Z*C4)

        fadd.d          ATANC1(%pc),%fp1        # C1+Z*(C3+Z*C5)
        fmul.x          X(%a6),%fp0             # X'*Y

        fadd.x          %fp2,%fp1               # [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]

        fmul.x          %fp1,%fp0               # X'*Y*([B1+Z*(B3+Z*B5)]
#                                       ...     +[Y*(B2+Z*(B4+Z*B6))])
        fadd.x          X(%a6),%fp0

        fmovm.x         (%sp)+,&0x30            # restore fp2/fp3

        fmov.l          %d0,%fpcr               # restore users rnd mode,prec
        tst.b           (%a0)
        bpl.b           pos_big

neg_big:
        fadd.x          NPIBY2(%pc),%fp0
        bra             t_minx2

pos_big:
        fadd.x          PPIBY2(%pc),%fp0
        bra             t_pinx2

ATANHUGE:
#--RETURN SIGN(X)*(PIBY2 - TINY) = SIGN(X)*PIBY2 - SIGN(X)*TINY
        tst.b           (%a0)
        bpl.b           pos_huge

neg_huge:
        fmov.x          NPIBY2(%pc),%fp0
        fmov.l          %d0,%fpcr
        fadd.x          PTINY(%pc),%fp0
        bra             t_minx2

pos_huge:
        fmov.x          PPIBY2(%pc),%fp0
        fmov.l          %d0,%fpcr
        fadd.x          NTINY(%pc),%fp0
        bra             t_pinx2

        global          satand
#--ENTRY POINT FOR ATAN(X) FOR DENORMALIZED ARGUMENT
satand:
        bra             t_extdnrm

#########################################################################
# sasin():  computes the inverse sine of a normalized input             #
# sasind(): computes the inverse sine of a denormalized input           #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = arcsin(X)                                                 #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       ASIN                                                            #
#       1. If |X| >= 1, go to 3.                                        #
#                                                                       #
#       2. (|X| < 1) Calculate asin(X) by                               #
#               z := sqrt( [1-X][1+X] )                                 #
#               asin(X) = atan( x / z ).                                #
#               Exit.                                                   #
#                                                                       #
#       3. If |X| > 1, go to 5.                                         #
#                                                                       #
#       4. (|X| = 1) sgn := sign(X), return asin(X) := sgn * Pi/2. Exit.#
#                                                                       #
#       5. (|X| > 1) Generate an invalid operation by 0 * infinity.     #
#               Exit.                                                   #
#                                                                       #
#########################################################################

        global          sasin
sasin:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1,&0x3FFF8000
        bge.b           ASINBIG

# This catch is added here for the '060 QSP. Originally, the call to
# satan() would handle this case by causing the exception which would
# not be caught until gen_except(). Now, with the exceptions being
# detected inside of satan(), the exception would have been handled there
# instead of inside sasin() as expected.
        cmp.l           %d1,&0x3FD78000
        blt.w           ASINTINY

#--THIS IS THE USUAL CASE, |X| < 1
#--ASIN(X) = ATAN( X / SQRT( (1-X)(1+X) ) )

ASINMAIN:
        fmov.s          &0x3F800000,%fp1
        fsub.x          %fp0,%fp1               # 1-X
        fmovm.x         &0x4,-(%sp)             #  {fp2}
        fmov.s          &0x3F800000,%fp2
        fadd.x          %fp0,%fp2               # 1+X
        fmul.x          %fp2,%fp1               # (1+X)(1-X)
        fmovm.x         (%sp)+,&0x20            #  {fp2}
        fsqrt.x         %fp1                    # SQRT([1-X][1+X])
        fdiv.x          %fp1,%fp0               # X/SQRT([1-X][1+X])
        fmovm.x         &0x01,-(%sp)            # save X/SQRT(...)
        lea             (%sp),%a0               # pass ptr to X/SQRT(...)
        bsr             satan
        add.l           &0xc,%sp                # clear X/SQRT(...) from stack
        bra             t_inx2

ASINBIG:
        fabs.x          %fp0                    # |X|
        fcmp.s          %fp0,&0x3F800000
        fbgt            t_operr                 # cause an operr exception

#--|X| = 1, ASIN(X) = +- PI/2.
ASINONE:
        fmov.x          PIBY2(%pc),%fp0
        mov.l           (%a0),%d1
        and.l           &0x80000000,%d1         # SIGN BIT OF X
        or.l            &0x3F800000,%d1         # +-1 IN SGL FORMAT
        mov.l           %d1,-(%sp)              # push SIGN(X) IN SGL-FMT
        fmov.l          %d0,%fpcr
        fmul.s          (%sp)+,%fp0
        bra             t_inx2

#--|X| < 2^(-40), ATAN(X) = X
ASINTINY:
        fmov.l          %d0,%fpcr               # restore users rnd mode,prec
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          (%a0),%fp0              # last inst - possible exception
        bra             t_catch

        global          sasind
#--ASIN(X) = X FOR DENORMALIZED X
sasind:
        bra             t_extdnrm

#########################################################################
# sacos():  computes the inverse cosine of a normalized input           #
# sacosd(): computes the inverse cosine of a denormalized input         #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = arccos(X)                                                 #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       ACOS                                                            #
#       1. If |X| >= 1, go to 3.                                        #
#                                                                       #
#       2. (|X| < 1) Calculate acos(X) by                               #
#               z := (1-X) / (1+X)                                      #
#               acos(X) = 2 * atan( sqrt(z) ).                          #
#               Exit.                                                   #
#                                                                       #
#       3. If |X| > 1, go to 5.                                         #
#                                                                       #
#       4. (|X| = 1) If X > 0, return 0. Otherwise, return Pi. Exit.    #
#                                                                       #
#       5. (|X| > 1) Generate an invalid operation by 0 * infinity.     #
#               Exit.                                                   #
#                                                                       #
#########################################################################

        global          sacos
sacos:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1               # pack exp w/ upper 16 fraction
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1,&0x3FFF8000
        bge.b           ACOSBIG

#--THIS IS THE USUAL CASE, |X| < 1
#--ACOS(X) = 2 * ATAN(  SQRT( (1-X)/(1+X) ) )

ACOSMAIN:
        fmov.s          &0x3F800000,%fp1
        fadd.x          %fp0,%fp1               # 1+X
        fneg.x          %fp0                    # -X
        fadd.s          &0x3F800000,%fp0        # 1-X
        fdiv.x          %fp1,%fp0               # (1-X)/(1+X)
        fsqrt.x         %fp0                    # SQRT((1-X)/(1+X))
        mov.l           %d0,-(%sp)              # save original users fpcr
        clr.l           %d0
        fmovm.x         &0x01,-(%sp)            # save SQRT(...) to stack
        lea             (%sp),%a0               # pass ptr to sqrt
        bsr             satan                   # ATAN(SQRT([1-X]/[1+X]))
        add.l           &0xc,%sp                # clear SQRT(...) from stack

        fmov.l          (%sp)+,%fpcr            # restore users round prec,mode
        fadd.x          %fp0,%fp0               # 2 * ATAN( STUFF )
        bra             t_pinx2

ACOSBIG:
        fabs.x          %fp0
        fcmp.s          %fp0,&0x3F800000
        fbgt            t_operr                 # cause an operr exception

#--|X| = 1, ACOS(X) = 0 OR PI
        tst.b           (%a0)                   # is X positive or negative?
        bpl.b           ACOSP1

#--X = -1
#Returns PI and inexact exception
ACOSM1:
        fmov.x          PI(%pc),%fp0            # load PI
        fmov.l          %d0,%fpcr               # load round mode,prec
        fadd.s          &0x00800000,%fp0        # add a small value
        bra             t_pinx2

ACOSP1:
        bra             ld_pzero                # answer is positive zero

        global          sacosd
#--ACOS(X) = PI/2 FOR DENORMALIZED X
sacosd:
        fmov.l          %d0,%fpcr               # load user's rnd mode/prec
        fmov.x          PIBY2(%pc),%fp0
        bra             t_pinx2

#########################################################################
# setox():    computes the exponential for a normalized input           #
# setoxd():   computes the exponential for a denormalized input         #
# setoxm1():  computes the exponential minus 1 for a normalized input   #
# setoxm1d(): computes the exponential minus 1 for a denormalized input #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = exp(X) or exp(X)-1                                        #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 0.85 ulps in 64 significant bit,  #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM and IMPLEMENTATION **************************************** #
#                                                                       #
#       setoxd                                                          #
#       ------                                                          #
#       Step 1. Set ans := 1.0                                          #
#                                                                       #
#       Step 2. Return  ans := ans + sign(X)*2^(-126). Exit.            #
#       Notes:  This will always generate one exception -- inexact.     #
#                                                                       #
#                                                                       #
#       setox                                                           #
#       -----                                                           #
#                                                                       #
#       Step 1. Filter out extreme cases of input argument.             #
#               1.1     If |X| >= 2^(-65), go to Step 1.3.              #
#               1.2     Go to Step 7.                                   #
#               1.3     If |X| < 16380 log(2), go to Step 2.            #
#               1.4     Go to Step 8.                                   #
#       Notes:  The usual case should take the branches 1.1 -> 1.3 -> 2.#
#               To avoid the use of floating-point comparisons, a       #
#               compact representation of |X| is used. This format is a #
#               32-bit integer, the upper (more significant) 16 bits    #
#               are the sign and biased exponent field of |X|; the      #
#               lower 16 bits are the 16 most significant fraction      #
#               (including the explicit bit) bits of |X|. Consequently, #
#               the comparisons in Steps 1.1 and 1.3 can be performed   #
#               by integer comparison. Note also that the constant      #
#               16380 log(2) used in Step 1.3 is also in the compact    #
#               form. Thus taking the branch to Step 2 guarantees       #
#               |X| < 16380 log(2). There is no harm to have a small    #
#               number of cases where |X| is less than, but close to,   #
#               16380 log(2) and the branch to Step 9 is taken.         #
#                                                                       #
#       Step 2. Calculate N = round-to-nearest-int( X * 64/log2 ).      #
#               2.1     Set AdjFlag := 0 (indicates the branch 1.3 -> 2 #
#                       was taken)                                      #
#               2.2     N := round-to-nearest-integer( X * 64/log2 ).   #
#               2.3     Calculate       J = N mod 64; so J = 0,1,2,..., #
#                       or 63.                                          #
#               2.4     Calculate       M = (N - J)/64; so N = 64M + J. #
#               2.5     Calculate the address of the stored value of    #
#                       2^(J/64).                                       #
#               2.6     Create the value Scale = 2^M.                   #
#       Notes:  The calculation in 2.2 is really performed by           #
#                       Z := X * constant                               #
#                       N := round-to-nearest-integer(Z)                #
#               where                                                   #
#                       constant := single-precision( 64/log 2 ).       #
#                                                                       #
#               Using a single-precision constant avoids memory         #
#               access. Another effect of using a single-precision      #
#               "constant" is that the calculated value Z is            #
#                                                                       #
#                       Z = X*(64/log2)*(1+eps), |eps| <= 2^(-24).      #
#                                                                       #
#               This error has to be considered later in Steps 3 and 4. #
#                                                                       #
#       Step 3. Calculate X - N*log2/64.                                #
#               3.1     R := X + N*L1,                                  #
#                               where L1 := single-precision(-log2/64). #
#               3.2     R := R + N*L2,                                  #
#                               L2 := extended-precision(-log2/64 - L1).#
#       Notes:  a) The way L1 and L2 are chosen ensures L1+L2           #
#               approximate the value -log2/64 to 88 bits of accuracy.  #
#               b) N*L1 is exact because N is no longer than 22 bits    #
#               and L1 is no longer than 24 bits.                       #
#               c) The calculation X+N*L1 is also exact due to          #
#               cancellation. Thus, R is practically X+N(L1+L2) to full #
#               64 bits.                                                #
#               d) It is important to estimate how large can |R| be     #
#               after Step 3.2.                                         #
#                                                                       #
#               N = rnd-to-int( X*64/log2 (1+eps) ), |eps|<=2^(-24)     #
#               X*64/log2 (1+eps)       =       N + f,  |f| <= 0.5      #
#               X*64/log2 - N   =       f - eps*X 64/log2               #
#               X - N*log2/64   =       f*log2/64 - eps*X               #
#                                                                       #
#                                                                       #
#               Now |X| <= 16446 log2, thus                             #
#                                                                       #
#                       |X - N*log2/64| <= (0.5 + 16446/2^(18))*log2/64 #
#                                       <= 0.57 log2/64.                #
#                This bound will be used in Step 4.                     #
#                                                                       #
#       Step 4. Approximate exp(R)-1 by a polynomial                    #
#               p = R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))      #
#       Notes:  a) In order to reduce memory access, the coefficients   #
#               are made as "short" as possible: A1 (which is 1/2), A4  #
#               and A5 are single precision; A2 and A3 are double       #
#               precision.                                              #
#               b) Even with the restrictions above,                    #
#                  |p - (exp(R)-1)| < 2^(-68.8) for all |R| <= 0.0062.  #
#               Note that 0.0062 is slightly bigger than 0.57 log2/64.  #
#               c) To fully utilize the pipeline, p is separated into   #
#               two independent pieces of roughly equal complexities    #
#                       p = [ R + R*S*(A2 + S*A4) ]     +               #
#                               [ S*(A1 + S*(A3 + S*A5)) ]              #
#               where S = R*R.                                          #
#                                                                       #
#       Step 5. Compute 2^(J/64)*exp(R) = 2^(J/64)*(1+p) by             #
#                               ans := T + ( T*p + t)                   #
#               where T and t are the stored values for 2^(J/64).       #
#       Notes:  2^(J/64) is stored as T and t where T+t approximates    #
#               2^(J/64) to roughly 85 bits; T is in extended precision #
#               and t is in single precision. Note also that T is       #
#               rounded to 62 bits so that the last two bits of T are   #
#               zero. The reason for such a special form is that T-1,   #
#               T-2, and T-8 will all be exact --- a property that will #
#               give much more accurate computation of the function     #
#               EXPM1.                                                  #
#                                                                       #
#       Step 6. Reconstruction of exp(X)                                #
#                       exp(X) = 2^M * 2^(J/64) * exp(R).               #
#               6.1     If AdjFlag = 0, go to 6.3                       #
#               6.2     ans := ans * AdjScale                           #
#               6.3     Restore the user FPCR                           #
#               6.4     Return ans := ans * Scale. Exit.                #
#       Notes:  If AdjFlag = 0, we have X = Mlog2 + Jlog2/64 + R,       #
#               |M| <= 16380, and Scale = 2^M. Moreover, exp(X) will    #
#               neither overflow nor underflow. If AdjFlag = 1, that    #
#               means that                                              #
#                       X = (M1+M)log2 + Jlog2/64 + R, |M1+M| >= 16380. #
#               Hence, exp(X) may overflow or underflow or neither.     #
#               When that is the case, AdjScale = 2^(M1) where M1 is    #
#               approximately M. Thus 6.2 will never cause              #
#               over/underflow. Possible exception in 6.4 is overflow   #
#               or underflow. The inexact exception is not generated in #
#               6.4. Although one can argue that the inexact flag       #
#               should always be raised, to simulate that exception     #
#               cost to much than the flag is worth in practical uses.  #
#                                                                       #
#       Step 7. Return 1 + X.                                           #
#               7.1     ans := X                                        #
#               7.2     Restore user FPCR.                              #
#               7.3     Return ans := 1 + ans. Exit                     #
#       Notes:  For non-zero X, the inexact exception will always be    #
#               raised by 7.3. That is the only exception raised by 7.3.#
#               Note also that we use the FMOVEM instruction to move X  #
#               in Step 7.1 to avoid unnecessary trapping. (Although    #
#               the FMOVEM may not seem relevant since X is normalized, #
#               the precaution will be useful in the library version of #
#               this code where the separate entry for denormalized     #
#               inputs will be done away with.)                         #
#                                                                       #
#       Step 8. Handle exp(X) where |X| >= 16380log2.                   #
#               8.1     If |X| > 16480 log2, go to Step 9.              #
#               (mimic 2.2 - 2.6)                                       #
#               8.2     N := round-to-integer( X * 64/log2 )            #
#               8.3     Calculate J = N mod 64, J = 0,1,...,63          #
#               8.4     K := (N-J)/64, M1 := truncate(K/2), M = K-M1,   #
#                       AdjFlag := 1.                                   #
#               8.5     Calculate the address of the stored value       #
#                       2^(J/64).                                       #
#               8.6     Create the values Scale = 2^M, AdjScale = 2^M1. #
#               8.7     Go to Step 3.                                   #
#       Notes:  Refer to notes for 2.2 - 2.6.                           #
#                                                                       #
#       Step 9. Handle exp(X), |X| > 16480 log2.                        #
#               9.1     If X < 0, go to 9.3                             #
#               9.2     ans := Huge, go to 9.4                          #
#               9.3     ans := Tiny.                                    #
#               9.4     Restore user FPCR.                              #
#               9.5     Return ans := ans * ans. Exit.                  #
#       Notes:  Exp(X) will surely overflow or underflow, depending on  #
#               X's sign. "Huge" and "Tiny" are respectively large/tiny #
#               extended-precision numbers whose square over/underflow  #
#               with an inexact result. Thus, 9.5 always raises the     #
#               inexact together with either overflow or underflow.     #
#                                                                       #
#       setoxm1d                                                        #
#       --------                                                        #
#                                                                       #
#       Step 1. Set ans := 0                                            #
#                                                                       #
#       Step 2. Return  ans := X + ans. Exit.                           #
#       Notes:  This will return X with the appropriate rounding        #
#                precision prescribed by the user FPCR.                 #
#                                                                       #
#       setoxm1                                                         #
#       -------                                                         #
#                                                                       #
#       Step 1. Check |X|                                               #
#               1.1     If |X| >= 1/4, go to Step 1.3.                  #
#               1.2     Go to Step 7.                                   #
#               1.3     If |X| < 70 log(2), go to Step 2.               #
#               1.4     Go to Step 10.                                  #
#       Notes:  The usual case should take the branches 1.1 -> 1.3 -> 2.#
#               However, it is conceivable |X| can be small very often  #
#               because EXPM1 is intended to evaluate exp(X)-1          #
#               accurately when |X| is small. For further details on    #
#               the comparisons, see the notes on Step 1 of setox.      #
#                                                                       #
#       Step 2. Calculate N = round-to-nearest-int( X * 64/log2 ).      #
#               2.1     N := round-to-nearest-integer( X * 64/log2 ).   #
#               2.2     Calculate       J = N mod 64; so J = 0,1,2,..., #
#                       or 63.                                          #
#               2.3     Calculate       M = (N - J)/64; so N = 64M + J. #
#               2.4     Calculate the address of the stored value of    #
#                       2^(J/64).                                       #
#               2.5     Create the values Sc = 2^M and                  #
#                       OnebySc := -2^(-M).                             #
#       Notes:  See the notes on Step 2 of setox.                       #
#                                                                       #
#       Step 3. Calculate X - N*log2/64.                                #
#               3.1     R := X + N*L1,                                  #
#                               where L1 := single-precision(-log2/64). #
#               3.2     R := R + N*L2,                                  #
#                               L2 := extended-precision(-log2/64 - L1).#
#       Notes:  Applying the analysis of Step 3 of setox in this case   #
#               shows that |R| <= 0.0055 (note that |X| <= 70 log2 in   #
#               this case).                                             #
#                                                                       #
#       Step 4. Approximate exp(R)-1 by a polynomial                    #
#                       p = R+R*R*(A1+R*(A2+R*(A3+R*(A4+R*(A5+R*A6))))) #
#       Notes:  a) In order to reduce memory access, the coefficients   #
#               are made as "short" as possible: A1 (which is 1/2), A5  #
#               and A6 are single precision; A2, A3 and A4 are double   #
#               precision.                                              #
#               b) Even with the restriction above,                     #
#                       |p - (exp(R)-1)| <      |R| * 2^(-72.7)         #
#               for all |R| <= 0.0055.                                  #
#               c) To fully utilize the pipeline, p is separated into   #
#               two independent pieces of roughly equal complexity      #
#                       p = [ R*S*(A2 + S*(A4 + S*A6)) ]        +       #
#                               [ R + S*(A1 + S*(A3 + S*A5)) ]          #
#               where S = R*R.                                          #
#                                                                       #
#       Step 5. Compute 2^(J/64)*p by                                   #
#                               p := T*p                                #
#               where T and t are the stored values for 2^(J/64).       #
#       Notes:  2^(J/64) is stored as T and t where T+t approximates    #
#               2^(J/64) to roughly 85 bits; T is in extended precision #
#               and t is in single precision. Note also that T is       #
#               rounded to 62 bits so that the last two bits of T are   #
#               zero. The reason for such a special form is that T-1,   #
#               T-2, and T-8 will all be exact --- a property that will #
#               be exploited in Step 6 below. The total relative error  #
#               in p is no bigger than 2^(-67.7) compared to the final  #
#               result.                                                 #
#                                                                       #
#       Step 6. Reconstruction of exp(X)-1                              #
#                       exp(X)-1 = 2^M * ( 2^(J/64) + p - 2^(-M) ).     #
#               6.1     If M <= 63, go to Step 6.3.                     #
#               6.2     ans := T + (p + (t + OnebySc)). Go to 6.6       #
#               6.3     If M >= -3, go to 6.5.                          #
#               6.4     ans := (T + (p + t)) + OnebySc. Go to 6.6       #
#               6.5     ans := (T + OnebySc) + (p + t).                 #
#               6.6     Restore user FPCR.                              #
#               6.7     Return ans := Sc * ans. Exit.                   #
#       Notes:  The various arrangements of the expressions give        #
#               accurate evaluations.                                   #
#                                                                       #
#       Step 7. exp(X)-1 for |X| < 1/4.                                 #
#               7.1     If |X| >= 2^(-65), go to Step 9.                #
#               7.2     Go to Step 8.                                   #
#                                                                       #
#       Step 8. Calculate exp(X)-1, |X| < 2^(-65).                      #
#               8.1     If |X| < 2^(-16312), goto 8.3                   #
#               8.2     Restore FPCR; return ans := X - 2^(-16382).     #
#                       Exit.                                           #
#               8.3     X := X * 2^(140).                               #
#               8.4     Restore FPCR; ans := ans - 2^(-16382).          #
#                Return ans := ans*2^(140). Exit                        #
#       Notes:  The idea is to return "X - tiny" under the user         #
#               precision and rounding modes. To avoid unnecessary      #
#               inefficiency, we stay away from denormalized numbers    #
#               the best we can. For |X| >= 2^(-16312), the             #
#               straightforward 8.2 generates the inexact exception as  #
#               the case warrants.                                      #
#                                                                       #
#       Step 9. Calculate exp(X)-1, |X| < 1/4, by a polynomial          #
#                       p = X + X*X*(B1 + X*(B2 + ... + X*B12))         #
#       Notes:  a) In order to reduce memory access, the coefficients   #
#               are made as "short" as possible: B1 (which is 1/2), B9  #
#               to B12 are single precision; B3 to B8 are double        #
#               precision; and B2 is double extended.                   #
#               b) Even with the restriction above,                     #
#                       |p - (exp(X)-1)| < |X| 2^(-70.6)                #
#               for all |X| <= 0.251.                                   #
#               Note that 0.251 is slightly bigger than 1/4.            #
#               c) To fully preserve accuracy, the polynomial is        #
#               computed as                                             #
#                       X + ( S*B1 +    Q ) where S = X*X and           #
#                       Q       =       X*S*(B2 + X*(B3 + ... + X*B12)) #
#               d) To fully utilize the pipeline, Q is separated into   #
#               two independent pieces of roughly equal complexity      #
#                       Q = [ X*S*(B2 + S*(B4 + ... + S*B12)) ] +       #
#                               [ S*S*(B3 + S*(B5 + ... + S*B11)) ]     #
#                                                                       #
#       Step 10. Calculate exp(X)-1 for |X| >= 70 log 2.                #
#               10.1 If X >= 70log2 , exp(X) - 1 = exp(X) for all       #
#               practical purposes. Therefore, go to Step 1 of setox.   #
#               10.2 If X <= -70log2, exp(X) - 1 = -1 for all practical #
#               purposes.                                               #
#               ans := -1                                               #
#               Restore user FPCR                                       #
#               Return ans := ans + 2^(-126). Exit.                     #
#       Notes:  10.2 will always create an inexact and return -1 + tiny #
#               in the user rounding precision and mode.                #
#                                                                       #
#########################################################################

L2:     long            0x3FDC0000,0x82E30865,0x4361C4C6,0x00000000

EEXPA3: long            0x3FA55555,0x55554CC1
EEXPA2: long            0x3FC55555,0x55554A54

EM1A4:  long            0x3F811111,0x11174385
EM1A3:  long            0x3FA55555,0x55554F5A

EM1A2:  long            0x3FC55555,0x55555555,0x00000000,0x00000000

EM1B8:  long            0x3EC71DE3,0xA5774682
EM1B7:  long            0x3EFA01A0,0x19D7CB68

EM1B6:  long            0x3F2A01A0,0x1A019DF3
EM1B5:  long            0x3F56C16C,0x16C170E2

EM1B4:  long            0x3F811111,0x11111111
EM1B3:  long            0x3FA55555,0x55555555

EM1B2:  long            0x3FFC0000,0xAAAAAAAA,0xAAAAAAAB
        long            0x00000000

TWO140: long            0x48B00000,0x00000000
TWON140:
        long            0x37300000,0x00000000

EEXPTBL:
        long            0x3FFF0000,0x80000000,0x00000000,0x00000000
        long            0x3FFF0000,0x8164D1F3,0xBC030774,0x9F841A9B
        long            0x3FFF0000,0x82CD8698,0xAC2BA1D8,0x9FC1D5B9
        long            0x3FFF0000,0x843A28C3,0xACDE4048,0xA0728369
        long            0x3FFF0000,0x85AAC367,0xCC487B14,0x1FC5C95C
        long            0x3FFF0000,0x871F6196,0x9E8D1010,0x1EE85C9F
        long            0x3FFF0000,0x88980E80,0x92DA8528,0x9FA20729
        long            0x3FFF0000,0x8A14D575,0x496EFD9C,0xA07BF9AF
        long            0x3FFF0000,0x8B95C1E3,0xEA8BD6E8,0xA0020DCF
        long            0x3FFF0000,0x8D1ADF5B,0x7E5BA9E4,0x205A63DA
        long            0x3FFF0000,0x8EA4398B,0x45CD53C0,0x1EB70051
        long            0x3FFF0000,0x9031DC43,0x1466B1DC,0x1F6EB029
        long            0x3FFF0000,0x91C3D373,0xAB11C338,0xA0781494
        long            0x3FFF0000,0x935A2B2F,0x13E6E92C,0x9EB319B0
        long            0x3FFF0000,0x94F4EFA8,0xFEF70960,0x2017457D
        long            0x3FFF0000,0x96942D37,0x20185A00,0x1F11D537
        long            0x3FFF0000,0x9837F051,0x8DB8A970,0x9FB952DD
        long            0x3FFF0000,0x99E04593,0x20B7FA64,0x1FE43087
        long            0x3FFF0000,0x9B8D39B9,0xD54E5538,0x1FA2A818
        long            0x3FFF0000,0x9D3ED9A7,0x2CFFB750,0x1FDE494D
        long            0x3FFF0000,0x9EF53260,0x91A111AC,0x20504890
        long            0x3FFF0000,0xA0B0510F,0xB9714FC4,0xA073691C
        long            0x3FFF0000,0xA2704303,0x0C496818,0x1F9B7A05
        long            0x3FFF0000,0xA43515AE,0x09E680A0,0xA0797126
        long            0x3FFF0000,0xA5FED6A9,0xB15138EC,0xA071A140
        long            0x3FFF0000,0xA7CD93B4,0xE9653568,0x204F62DA
        long            0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x1F283C4A
        long            0x3FFF0000,0xAB7A39B5,0xA93ED338,0x9F9A7FDC
        long            0x3FFF0000,0xAD583EEA,0x42A14AC8,0xA05B3FAC
        long            0x3FFF0000,0xAF3B78AD,0x690A4374,0x1FDF2610
        long            0x3FFF0000,0xB123F581,0xD2AC2590,0x9F705F90
        long            0x3FFF0000,0xB311C412,0xA9112488,0x201F678A
        long            0x3FFF0000,0xB504F333,0xF9DE6484,0x1F32FB13
        long            0x3FFF0000,0xB6FD91E3,0x28D17790,0x20038B30
        long            0x3FFF0000,0xB8FBAF47,0x62FB9EE8,0x200DC3CC
        long            0x3FFF0000,0xBAFF5AB2,0x133E45FC,0x9F8B2AE6
        long            0x3FFF0000,0xBD08A39F,0x580C36C0,0xA02BBF70
        long            0x3FFF0000,0xBF1799B6,0x7A731084,0xA00BF518
        long            0x3FFF0000,0xC12C4CCA,0x66709458,0xA041DD41
        long            0x3FFF0000,0xC346CCDA,0x24976408,0x9FDF137B
        long            0x3FFF0000,0xC5672A11,0x5506DADC,0x201F1568
        long            0x3FFF0000,0xC78D74C8,0xABB9B15C,0x1FC13A2E
        long            0x3FFF0000,0xC9B9BD86,0x6E2F27A4,0xA03F8F03
        long            0x3FFF0000,0xCBEC14FE,0xF2727C5C,0x1FF4907D
        long            0x3FFF0000,0xCE248C15,0x1F8480E4,0x9E6E53E4
        long            0x3FFF0000,0xD06333DA,0xEF2B2594,0x1FD6D45C
        long            0x3FFF0000,0xD2A81D91,0xF12AE45C,0xA076EDB9
        long            0x3FFF0000,0xD4F35AAB,0xCFEDFA20,0x9FA6DE21
        long            0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x1EE69A2F
        long            0x3FFF0000,0xD99D15C2,0x78AFD7B4,0x207F439F
        long            0x3FFF0000,0xDBFBB797,0xDAF23754,0x201EC207
        long            0x3FFF0000,0xDE60F482,0x5E0E9124,0x9E8BE175
        long            0x3FFF0000,0xE0CCDEEC,0x2A94E110,0x20032C4B
        long            0x3FFF0000,0xE33F8972,0xBE8A5A50,0x2004DFF5
        long            0x3FFF0000,0xE5B906E7,0x7C8348A8,0x1E72F47A
        long            0x3FFF0000,0xE8396A50,0x3C4BDC68,0x1F722F22
        long            0x3FFF0000,0xEAC0C6E7,0xDD243930,0xA017E945
        long            0x3FFF0000,0xED4F301E,0xD9942B84,0x1F401A5B
        long            0x3FFF0000,0xEFE4B99B,0xDCDAF5CC,0x9FB9A9E3
        long            0x3FFF0000,0xF281773C,0x59FFB138,0x20744C05
        long            0x3FFF0000,0xF5257D15,0x2486CC2C,0x1F773A19
        long            0x3FFF0000,0xF7D0DF73,0x0AD13BB8,0x1FFE90D5
        long            0x3FFF0000,0xFA83B2DB,0x722A033C,0xA041ED22
        long            0x3FFF0000,0xFD3E0C0C,0xF486C174,0x1F853F3A

        set             ADJFLAG,L_SCR2
        set             SCALE,FP_SCR0
        set             ADJSCALE,FP_SCR1
        set             SC,FP_SCR0
        set             ONEBYSC,FP_SCR1

        global          setox
setox:
#--entry point for EXP(X), here X is finite, non-zero, and not NaN's

#--Step 1.
        mov.l           (%a0),%d1               # load part of input X
        and.l           &0x7FFF0000,%d1         # biased expo. of X
        cmp.l           %d1,&0x3FBE0000         # 2^(-65)
        bge.b           EXPC1                   # normal case
        bra             EXPSM

EXPC1:
#--The case |X| >= 2^(-65)
        mov.w           4(%a0),%d1              # expo. and partial sig. of |X|
        cmp.l           %d1,&0x400CB167         # 16380 log2 trunc. 16 bits
        blt.b           EXPMAIN                 # normal case
        bra             EEXPBIG

EXPMAIN:
#--Step 2.
#--This is the normal branch:   2^(-65) <= |X| < 16380 log2.
        fmov.x          (%a0),%fp0              # load input from (a0)

        fmov.x          %fp0,%fp1
        fmul.s          &0x42B8AA3B,%fp0        # 64/log2 * X
        fmovm.x         &0xc,-(%sp)             # save fp2 {%fp2/%fp3}
        mov.l           &0,ADJFLAG(%a6)
        fmov.l          %fp0,%d1                # N = int( X * 64/log2 )
        lea             EEXPTBL(%pc),%a1
        fmov.l          %d1,%fp0                # convert to floating-format

        mov.l           %d1,L_SCR1(%a6)         # save N temporarily
        and.l           &0x3F,%d1               # D0 is J = N mod 64
        lsl.l           &4,%d1
        add.l           %d1,%a1                 # address of 2^(J/64)
        mov.l           L_SCR1(%a6),%d1
        asr.l           &6,%d1                  # D0 is M
        add.w           &0x3FFF,%d1             # biased expo. of 2^(M)
        mov.w           L2(%pc),L_SCR1(%a6)     # prefetch L2, no need in CB

EXPCONT1:
#--Step 3.
#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
#--a0 points to 2^(J/64), D0 is biased expo. of 2^(M)
        fmov.x          %fp0,%fp2
        fmul.s          &0xBC317218,%fp0        # N * L1, L1 = lead(-log2/64)
        fmul.x          L2(%pc),%fp2            # N * L2, L1+L2 = -log2/64
        fadd.x          %fp1,%fp0               # X + N*L1
        fadd.x          %fp2,%fp0               # fp0 is R, reduced arg.

#--Step 4.
#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*A5))))
#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
#--[R+R*S*(A2+S*A4)] + [S*(A1+S*(A3+S*A5))]

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # fp1 IS S = R*R

        fmov.s          &0x3AB60B70,%fp2        # fp2 IS A5

        fmul.x          %fp1,%fp2               # fp2 IS S*A5
        fmov.x          %fp1,%fp3
        fmul.s          &0x3C088895,%fp3        # fp3 IS S*A4

        fadd.d          EEXPA3(%pc),%fp2        # fp2 IS A3+S*A5
        fadd.d          EEXPA2(%pc),%fp3        # fp3 IS A2+S*A4

        fmul.x          %fp1,%fp2               # fp2 IS S*(A3+S*A5)
        mov.w           %d1,SCALE(%a6)          # SCALE is 2^(M) in extended
        mov.l           &0x80000000,SCALE+4(%a6)
        clr.l           SCALE+8(%a6)

        fmul.x          %fp1,%fp3               # fp3 IS S*(A2+S*A4)

        fadd.s          &0x3F000000,%fp2        # fp2 IS A1+S*(A3+S*A5)
        fmul.x          %fp0,%fp3               # fp3 IS R*S*(A2+S*A4)

        fmul.x          %fp1,%fp2               # fp2 IS S*(A1+S*(A3+S*A5))
        fadd.x          %fp3,%fp0               # fp0 IS R+R*S*(A2+S*A4),

        fmov.x          (%a1)+,%fp1             # fp1 is lead. pt. of 2^(J/64)
        fadd.x          %fp2,%fp0               # fp0 is EXP(R) - 1

#--Step 5
#--final reconstruction process
#--EXP(X) = 2^M * ( 2^(J/64) + 2^(J/64)*(EXP(R)-1) )

        fmul.x          %fp1,%fp0               # 2^(J/64)*(Exp(R)-1)
        fmovm.x         (%sp)+,&0x30            # fp2 restored {%fp2/%fp3}
        fadd.s          (%a1),%fp0              # accurate 2^(J/64)

        fadd.x          %fp1,%fp0               # 2^(J/64) + 2^(J/64)*...
        mov.l           ADJFLAG(%a6),%d1

#--Step 6
        tst.l           %d1
        beq.b           NORMAL
ADJUST:
        fmul.x          ADJSCALE(%a6),%fp0
NORMAL:
        fmov.l          %d0,%fpcr               # restore user FPCR
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          SCALE(%a6),%fp0         # multiply 2^(M)
        bra             t_catch

EXPSM:
#--Step 7
        fmovm.x         (%a0),&0x80             # load X
        fmov.l          %d0,%fpcr
        fadd.s          &0x3F800000,%fp0        # 1+X in user mode
        bra             t_pinx2

EEXPBIG:
#--Step 8
        cmp.l           %d1,&0x400CB27C         # 16480 log2
        bgt.b           EXP2BIG
#--Steps 8.2 -- 8.6
        fmov.x          (%a0),%fp0              # load input from (a0)

        fmov.x          %fp0,%fp1
        fmul.s          &0x42B8AA3B,%fp0        # 64/log2 * X
        fmovm.x         &0xc,-(%sp)             # save fp2 {%fp2/%fp3}
        mov.l           &1,ADJFLAG(%a6)
        fmov.l          %fp0,%d1                # N = int( X * 64/log2 )
        lea             EEXPTBL(%pc),%a1
        fmov.l          %d1,%fp0                # convert to floating-format
        mov.l           %d1,L_SCR1(%a6)         # save N temporarily
        and.l           &0x3F,%d1               # D0 is J = N mod 64
        lsl.l           &4,%d1
        add.l           %d1,%a1                 # address of 2^(J/64)
        mov.l           L_SCR1(%a6),%d1
        asr.l           &6,%d1                  # D0 is K
        mov.l           %d1,L_SCR1(%a6)         # save K temporarily
        asr.l           &1,%d1                  # D0 is M1
        sub.l           %d1,L_SCR1(%a6)         # a1 is M
        add.w           &0x3FFF,%d1             # biased expo. of 2^(M1)
        mov.w           %d1,ADJSCALE(%a6)       # ADJSCALE := 2^(M1)
        mov.l           &0x80000000,ADJSCALE+4(%a6)
        clr.l           ADJSCALE+8(%a6)
        mov.l           L_SCR1(%a6),%d1         # D0 is M
        add.w           &0x3FFF,%d1             # biased expo. of 2^(M)
        bra.w           EXPCONT1                # go back to Step 3

EXP2BIG:
#--Step 9
        tst.b           (%a0)                   # is X positive or negative?
        bmi             t_unfl2
        bra             t_ovfl2

        global          setoxd
setoxd:
#--entry point for EXP(X), X is denormalized
        mov.l           (%a0),-(%sp)
        andi.l          &0x80000000,(%sp)
        ori.l           &0x00800000,(%sp)       # sign(X)*2^(-126)

        fmov.s          &0x3F800000,%fp0

        fmov.l          %d0,%fpcr
        fadd.s          (%sp)+,%fp0
        bra             t_pinx2

        global          setoxm1
setoxm1:
#--entry point for EXPM1(X), here X is finite, non-zero, non-NaN

#--Step 1.
#--Step 1.1
        mov.l           (%a0),%d1               # load part of input X
        and.l           &0x7FFF0000,%d1         # biased expo. of X
        cmp.l           %d1,&0x3FFD0000         # 1/4
        bge.b           EM1CON1                 # |X| >= 1/4
        bra             EM1SM

EM1CON1:
#--Step 1.3
#--The case |X| >= 1/4
        mov.w           4(%a0),%d1              # expo. and partial sig. of |X|
        cmp.l           %d1,&0x4004C215         # 70log2 rounded up to 16 bits
        ble.b           EM1MAIN                 # 1/4 <= |X| <= 70log2
        bra             EM1BIG

EM1MAIN:
#--Step 2.
#--This is the case:    1/4 <= |X| <= 70 log2.
        fmov.x          (%a0),%fp0              # load input from (a0)

        fmov.x          %fp0,%fp1
        fmul.s          &0x42B8AA3B,%fp0        # 64/log2 * X
        fmovm.x         &0xc,-(%sp)             # save fp2 {%fp2/%fp3}
        fmov.l          %fp0,%d1                # N = int( X * 64/log2 )
        lea             EEXPTBL(%pc),%a1
        fmov.l          %d1,%fp0                # convert to floating-format

        mov.l           %d1,L_SCR1(%a6)         # save N temporarily
        and.l           &0x3F,%d1               # D0 is J = N mod 64
        lsl.l           &4,%d1
        add.l           %d1,%a1                 # address of 2^(J/64)
        mov.l           L_SCR1(%a6),%d1
        asr.l           &6,%d1                  # D0 is M
        mov.l           %d1,L_SCR1(%a6)         # save a copy of M

#--Step 3.
#--fp1,fp2 saved on the stack. fp0 is N, fp1 is X,
#--a0 points to 2^(J/64), D0 and a1 both contain M
        fmov.x          %fp0,%fp2
        fmul.s          &0xBC317218,%fp0        # N * L1, L1 = lead(-log2/64)
        fmul.x          L2(%pc),%fp2            # N * L2, L1+L2 = -log2/64
        fadd.x          %fp1,%fp0               # X + N*L1
        fadd.x          %fp2,%fp0               # fp0 is R, reduced arg.
        add.w           &0x3FFF,%d1             # D0 is biased expo. of 2^M

#--Step 4.
#--WE NOW COMPUTE EXP(R)-1 BY A POLYNOMIAL
#-- R + R*R*(A1 + R*(A2 + R*(A3 + R*(A4 + R*(A5 + R*A6)))))
#--TO FULLY UTILIZE THE PIPELINE, WE COMPUTE S = R*R
#--[R*S*(A2+S*(A4+S*A6))] + [R+S*(A1+S*(A3+S*A5))]

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # fp1 IS S = R*R

        fmov.s          &0x3950097B,%fp2        # fp2 IS a6

        fmul.x          %fp1,%fp2               # fp2 IS S*A6
        fmov.x          %fp1,%fp3
        fmul.s          &0x3AB60B6A,%fp3        # fp3 IS S*A5

        fadd.d          EM1A4(%pc),%fp2         # fp2 IS A4+S*A6
        fadd.d          EM1A3(%pc),%fp3         # fp3 IS A3+S*A5
        mov.w           %d1,SC(%a6)             # SC is 2^(M) in extended
        mov.l           &0x80000000,SC+4(%a6)
        clr.l           SC+8(%a6)

        fmul.x          %fp1,%fp2               # fp2 IS S*(A4+S*A6)
        mov.l           L_SCR1(%a6),%d1         # D0 is M
        neg.w           %d1                     # D0 is -M
        fmul.x          %fp1,%fp3               # fp3 IS S*(A3+S*A5)
        add.w           &0x3FFF,%d1             # biased expo. of 2^(-M)
        fadd.d          EM1A2(%pc),%fp2         # fp2 IS A2+S*(A4+S*A6)
        fadd.s          &0x3F000000,%fp3        # fp3 IS A1+S*(A3+S*A5)

        fmul.x          %fp1,%fp2               # fp2 IS S*(A2+S*(A4+S*A6))
        or.w            &0x8000,%d1             # signed/expo. of -2^(-M)
        mov.w           %d1,ONEBYSC(%a6)        # OnebySc is -2^(-M)
        mov.l           &0x80000000,ONEBYSC+4(%a6)
        clr.l           ONEBYSC+8(%a6)
        fmul.x          %fp3,%fp1               # fp1 IS S*(A1+S*(A3+S*A5))

        fmul.x          %fp0,%fp2               # fp2 IS R*S*(A2+S*(A4+S*A6))
        fadd.x          %fp1,%fp0               # fp0 IS R+S*(A1+S*(A3+S*A5))

        fadd.x          %fp2,%fp0               # fp0 IS EXP(R)-1

        fmovm.x         (%sp)+,&0x30            # fp2 restored {%fp2/%fp3}

#--Step 5
#--Compute 2^(J/64)*p

        fmul.x          (%a1),%fp0              # 2^(J/64)*(Exp(R)-1)

#--Step 6
#--Step 6.1
        mov.l           L_SCR1(%a6),%d1         # retrieve M
        cmp.l           %d1,&63
        ble.b           MLE63
#--Step 6.2     M >= 64
        fmov.s          12(%a1),%fp1            # fp1 is t
        fadd.x          ONEBYSC(%a6),%fp1       # fp1 is t+OnebySc
        fadd.x          %fp1,%fp0               # p+(t+OnebySc), fp1 released
        fadd.x          (%a1),%fp0              # T+(p+(t+OnebySc))
        bra             EM1SCALE
MLE63:
#--Step 6.3     M <= 63
        cmp.l           %d1,&-3
        bge.b           MGEN3
MLTN3:
#--Step 6.4     M <= -4
        fadd.s          12(%a1),%fp0            # p+t
        fadd.x          (%a1),%fp0              # T+(p+t)
        fadd.x          ONEBYSC(%a6),%fp0       # OnebySc + (T+(p+t))
        bra             EM1SCALE
MGEN3:
#--Step 6.5     -3 <= M <= 63
        fmov.x          (%a1)+,%fp1             # fp1 is T
        fadd.s          (%a1),%fp0              # fp0 is p+t
        fadd.x          ONEBYSC(%a6),%fp1       # fp1 is T+OnebySc
        fadd.x          %fp1,%fp0               # (T+OnebySc)+(p+t)

EM1SCALE:
#--Step 6.6
        fmov.l          %d0,%fpcr
        fmul.x          SC(%a6),%fp0
        bra             t_inx2

EM1SM:
#--Step 7       |X| < 1/4.
        cmp.l           %d1,&0x3FBE0000         # 2^(-65)
        bge.b           EM1POLY

EM1TINY:
#--Step 8       |X| < 2^(-65)
        cmp.l           %d1,&0x00330000         # 2^(-16312)
        blt.b           EM12TINY
#--Step 8.2
        mov.l           &0x80010000,SC(%a6)     # SC is -2^(-16382)
        mov.l           &0x80000000,SC+4(%a6)
        clr.l           SC+8(%a6)
        fmov.x          (%a0),%fp0
        fmov.l          %d0,%fpcr
        mov.b           &FADD_OP,%d1            # last inst is ADD
        fadd.x          SC(%a6),%fp0
        bra             t_catch

EM12TINY:
#--Step 8.3
        fmov.x          (%a0),%fp0
        fmul.d          TWO140(%pc),%fp0
        mov.l           &0x80010000,SC(%a6)
        mov.l           &0x80000000,SC+4(%a6)
        clr.l           SC+8(%a6)
        fadd.x          SC(%a6),%fp0
        fmov.l          %d0,%fpcr
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.d          TWON140(%pc),%fp0
        bra             t_catch

EM1POLY:
#--Step 9       exp(X)-1 by a simple polynomial
        fmov.x          (%a0),%fp0              # fp0 is X
        fmul.x          %fp0,%fp0               # fp0 is S := X*X
        fmovm.x         &0xc,-(%sp)             # save fp2 {%fp2/%fp3}
        fmov.s          &0x2F30CAA8,%fp1        # fp1 is B12
        fmul.x          %fp0,%fp1               # fp1 is S*B12
        fmov.s          &0x310F8290,%fp2        # fp2 is B11
        fadd.s          &0x32D73220,%fp1        # fp1 is B10+S*B12

        fmul.x          %fp0,%fp2               # fp2 is S*B11
        fmul.x          %fp0,%fp1               # fp1 is S*(B10 + ...

        fadd.s          &0x3493F281,%fp2        # fp2 is B9+S*...
        fadd.d          EM1B8(%pc),%fp1         # fp1 is B8+S*...

        fmul.x          %fp0,%fp2               # fp2 is S*(B9+...
        fmul.x          %fp0,%fp1               # fp1 is S*(B8+...

        fadd.d          EM1B7(%pc),%fp2         # fp2 is B7+S*...
        fadd.d          EM1B6(%pc),%fp1         # fp1 is B6+S*...

        fmul.x          %fp0,%fp2               # fp2 is S*(B7+...
        fmul.x          %fp0,%fp1               # fp1 is S*(B6+...

        fadd.d          EM1B5(%pc),%fp2         # fp2 is B5+S*...
        fadd.d          EM1B4(%pc),%fp1         # fp1 is B4+S*...

        fmul.x          %fp0,%fp2               # fp2 is S*(B5+...
        fmul.x          %fp0,%fp1               # fp1 is S*(B4+...

        fadd.d          EM1B3(%pc),%fp2         # fp2 is B3+S*...
        fadd.x          EM1B2(%pc),%fp1         # fp1 is B2+S*...

        fmul.x          %fp0,%fp2               # fp2 is S*(B3+...
        fmul.x          %fp0,%fp1               # fp1 is S*(B2+...

        fmul.x          %fp0,%fp2               # fp2 is S*S*(B3+...)
        fmul.x          (%a0),%fp1              # fp1 is X*S*(B2...

        fmul.s          &0x3F000000,%fp0        # fp0 is S*B1
        fadd.x          %fp2,%fp1               # fp1 is Q

        fmovm.x         (%sp)+,&0x30            # fp2 restored {%fp2/%fp3}

        fadd.x          %fp1,%fp0               # fp0 is S*B1+Q

        fmov.l          %d0,%fpcr
        fadd.x          (%a0),%fp0
        bra             t_inx2

EM1BIG:
#--Step 10      |X| > 70 log2
        mov.l           (%a0),%d1
        cmp.l           %d1,&0
        bgt.w           EXPC1
#--Step 10.2
        fmov.s          &0xBF800000,%fp0        # fp0 is -1
        fmov.l          %d0,%fpcr
        fadd.s          &0x00800000,%fp0        # -1 + 2^(-126)
        bra             t_minx2

        global          setoxm1d
setoxm1d:
#--entry point for EXPM1(X), here X is denormalized
#--Step 0.
        bra             t_extdnrm

#########################################################################
# sgetexp():  returns the exponent portion of the input argument.       #
#             The exponent bias is removed and the exponent value is    #
#             returned as an extended precision number in fp0.          #
# sgetexpd(): handles denormalized numbers.                             #
#                                                                       #
# sgetman():  extracts the mantissa of the input argument. The          #
#             mantissa is converted to an extended precision number w/  #
#             an exponent of $3fff and is returned in fp0. The range of #
#             the result is [1.0 - 2.0).                                #
# sgetmand(): handles denormalized numbers.                             #
#                                                                       #
# INPUT *************************************************************** #
#       a0  = pointer to extended precision input                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = exponent(X) or mantissa(X)                                #
#                                                                       #
#########################################################################

        global          sgetexp
sgetexp:
        mov.w           SRC_EX(%a0),%d0         # get the exponent
        bclr            &0xf,%d0                # clear the sign bit
        subi.w          &0x3fff,%d0             # subtract off the bias
        fmov.w          %d0,%fp0                # return exp in fp0
        blt.b           sgetexpn                # it's negative
        rts

sgetexpn:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

        global          sgetexpd
sgetexpd:
        bsr.l           norm                    # normalize
        neg.w           %d0                     # new exp = -(shft amt)
        subi.w          &0x3fff,%d0             # subtract off the bias
        fmov.w          %d0,%fp0                # return exp in fp0
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

        global          sgetman
sgetman:
        mov.w           SRC_EX(%a0),%d0         # get the exp
        ori.w           &0x7fff,%d0             # clear old exp
        bclr            &0xe,%d0                # make it the new exp +-3fff

# here, we build the result in a tmp location so as not to disturb the input
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6) # copy to tmp loc
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6) # copy to tmp loc
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert new exponent
        fmov.x          FP_SCR0(%a6),%fp0       # put new value back in fp0
        bmi.b           sgetmann                # it's negative
        rts

sgetmann:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

#
# For denormalized numbers, shift the mantissa until the j-bit = 1,
# then load the exponent with +/1 $3fff.
#
        global          sgetmand
sgetmand:
        bsr.l           norm                    # normalize exponent
        bra.b           sgetman

#########################################################################
# scosh():  computes the hyperbolic cosine of a normalized input        #
# scoshd(): computes the hyperbolic cosine of a denormalized input      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = cosh(X)                                                   #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       COSH                                                            #
#       1. If |X| > 16380 log2, go to 3.                                #
#                                                                       #
#       2. (|X| <= 16380 log2) Cosh(X) is obtained by the formulae      #
#               y = |X|, z = exp(Y), and                                #
#               cosh(X) = (1/2)*( z + 1/z ).                            #
#               Exit.                                                   #
#                                                                       #
#       3. (|X| > 16380 log2). If |X| > 16480 log2, go to 5.            #
#                                                                       #
#       4. (16380 log2 < |X| <= 16480 log2)                             #
#               cosh(X) = sign(X) * exp(|X|)/2.                         #
#               However, invoking exp(|X|) may cause premature          #
#               overflow. Thus, we calculate sinh(X) as follows:        #
#               Y       := |X|                                          #
#               Fact    :=      2**(16380)                              #
#               Y'      := Y - 16381 log2                               #
#               cosh(X) := Fact * exp(Y').                              #
#               Exit.                                                   #
#                                                                       #
#       5. (|X| > 16480 log2) sinh(X) must overflow. Return             #
#               Huge*Huge to generate overflow and an infinity with     #
#               the appropriate sign. Huge is the largest finite number #
#               in extended format. Exit.                               #
#                                                                       #
#########################################################################

TWO16380:
        long            0x7FFB0000,0x80000000,0x00000000,0x00000000

        global          scosh
scosh:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1,&0x400CB167
        bgt.b           COSHBIG

#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
#--COSH(X) = (1/2) * ( EXP(X) + 1/EXP(X) )

        fabs.x          %fp0                    # |X|

        mov.l           %d0,-(%sp)
        clr.l           %d0
        fmovm.x         &0x01,-(%sp)            # save |X| to stack
        lea             (%sp),%a0               # pass ptr to |X|
        bsr             setox                   # FP0 IS EXP(|X|)
        add.l           &0xc,%sp                # erase |X| from stack
        fmul.s          &0x3F000000,%fp0        # (1/2)EXP(|X|)
        mov.l           (%sp)+,%d0

        fmov.s          &0x3E800000,%fp1        # (1/4)
        fdiv.x          %fp0,%fp1               # 1/(2 EXP(|X|))

        fmov.l          %d0,%fpcr
        mov.b           &FADD_OP,%d1            # last inst is ADD
        fadd.x          %fp1,%fp0
        bra             t_catch

COSHBIG:
        cmp.l           %d1,&0x400CB2B3
        bgt.b           COSHHUGE

        fabs.x          %fp0
        fsub.d          T1(%pc),%fp0            # (|X|-16381LOG2_LEAD)
        fsub.d          T2(%pc),%fp0            # |X| - 16381 LOG2, ACCURATE

        mov.l           %d0,-(%sp)
        clr.l           %d0
        fmovm.x         &0x01,-(%sp)            # save fp0 to stack
        lea             (%sp),%a0               # pass ptr to fp0
        bsr             setox
        add.l           &0xc,%sp                # clear fp0 from stack
        mov.l           (%sp)+,%d0

        fmov.l          %d0,%fpcr
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          TWO16380(%pc),%fp0
        bra             t_catch

COSHHUGE:
        bra             t_ovfl2

        global          scoshd
#--COSH(X) = 1 FOR DENORMALIZED X
scoshd:
        fmov.s          &0x3F800000,%fp0

        fmov.l          %d0,%fpcr
        fadd.s          &0x00800000,%fp0
        bra             t_pinx2

#########################################################################
# ssinh():  computes the hyperbolic sine of a normalized input          #
# ssinhd(): computes the hyperbolic sine of a denormalized input        #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = sinh(X)                                                   #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       SINH                                                            #
#       1. If |X| > 16380 log2, go to 3.                                #
#                                                                       #
#       2. (|X| <= 16380 log2) Sinh(X) is obtained by the formula       #
#               y = |X|, sgn = sign(X), and z = expm1(Y),               #
#               sinh(X) = sgn*(1/2)*( z + z/(1+z) ).                    #
#          Exit.                                                        #
#                                                                       #
#       3. If |X| > 16480 log2, go to 5.                                #
#                                                                       #
#       4. (16380 log2 < |X| <= 16480 log2)                             #
#               sinh(X) = sign(X) * exp(|X|)/2.                         #
#          However, invoking exp(|X|) may cause premature overflow.     #
#          Thus, we calculate sinh(X) as follows:                       #
#             Y       := |X|                                            #
#             sgn     := sign(X)                                        #
#             sgnFact := sgn * 2**(16380)                               #
#             Y'      := Y - 16381 log2                                 #
#             sinh(X) := sgnFact * exp(Y').                             #
#          Exit.                                                        #
#                                                                       #
#       5. (|X| > 16480 log2) sinh(X) must overflow. Return             #
#          sign(X)*Huge*Huge to generate overflow and an infinity with  #
#          the appropriate sign. Huge is the largest finite number in   #
#          extended format. Exit.                                       #
#                                                                       #
#########################################################################

        global          ssinh
ssinh:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        mov.l           %d1,%a1                 # save (compacted) operand
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1,&0x400CB167
        bgt.b           SINHBIG

#--THIS IS THE USUAL CASE, |X| < 16380 LOG2
#--Y = |X|, Z = EXPM1(Y), SINH(X) = SIGN(X)*(1/2)*( Z + Z/(1+Z) )

        fabs.x          %fp0                    # Y = |X|

        movm.l          &0x8040,-(%sp)          # {a1/d0}
        fmovm.x         &0x01,-(%sp)            # save Y on stack
        lea             (%sp),%a0               # pass ptr to Y
        clr.l           %d0
        bsr             setoxm1                 # FP0 IS Z = EXPM1(Y)
        add.l           &0xc,%sp                # clear Y from stack
        fmov.l          &0,%fpcr
        movm.l          (%sp)+,&0x0201          # {a1/d0}

        fmov.x          %fp0,%fp1
        fadd.s          &0x3F800000,%fp1        # 1+Z
        fmov.x          %fp0,-(%sp)
        fdiv.x          %fp1,%fp0               # Z/(1+Z)
        mov.l           %a1,%d1
        and.l           &0x80000000,%d1
        or.l            &0x3F000000,%d1
        fadd.x          (%sp)+,%fp0
        mov.l           %d1,-(%sp)

        fmov.l          %d0,%fpcr
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.s          (%sp)+,%fp0             # last fp inst - possible exceptions set
        bra             t_catch

SINHBIG:
        cmp.l           %d1,&0x400CB2B3
        bgt             t_ovfl
        fabs.x          %fp0
        fsub.d          T1(%pc),%fp0            # (|X|-16381LOG2_LEAD)
        mov.l           &0,-(%sp)
        mov.l           &0x80000000,-(%sp)
        mov.l           %a1,%d1
        and.l           &0x80000000,%d1
        or.l            &0x7FFB0000,%d1
        mov.l           %d1,-(%sp)              # EXTENDED FMT
        fsub.d          T2(%pc),%fp0            # |X| - 16381 LOG2, ACCURATE

        mov.l           %d0,-(%sp)
        clr.l           %d0
        fmovm.x         &0x01,-(%sp)            # save fp0 on stack
        lea             (%sp),%a0               # pass ptr to fp0
        bsr             setox
        add.l           &0xc,%sp                # clear fp0 from stack

        mov.l           (%sp)+,%d0
        fmov.l          %d0,%fpcr
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          (%sp)+,%fp0             # possible exception
        bra             t_catch

        global          ssinhd
#--SINH(X) = X FOR DENORMALIZED X
ssinhd:
        bra             t_extdnrm

#########################################################################
# stanh():  computes the hyperbolic tangent of a normalized input       #
# stanhd(): computes the hyperbolic tangent of a denormalized input     #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = tanh(X)                                                   #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       TANH                                                            #
#       1. If |X| >= (5/2) log2 or |X| <= 2**(-40), go to 3.            #
#                                                                       #
#       2. (2**(-40) < |X| < (5/2) log2) Calculate tanh(X) by           #
#               sgn := sign(X), y := 2|X|, z := expm1(Y), and           #
#               tanh(X) = sgn*( z/(2+z) ).                              #
#               Exit.                                                   #
#                                                                       #
#       3. (|X| <= 2**(-40) or |X| >= (5/2) log2). If |X| < 1,          #
#               go to 7.                                                #
#                                                                       #
#       4. (|X| >= (5/2) log2) If |X| >= 50 log2, go to 6.              #
#                                                                       #
#       5. ((5/2) log2 <= |X| < 50 log2) Calculate tanh(X) by           #
#               sgn := sign(X), y := 2|X|, z := exp(Y),                 #
#               tanh(X) = sgn - [ sgn*2/(1+z) ].                        #
#               Exit.                                                   #
#                                                                       #
#       6. (|X| >= 50 log2) Tanh(X) = +-1 (round to nearest). Thus, we  #
#               calculate Tanh(X) by                                    #
#               sgn := sign(X), Tiny := 2**(-126),                      #
#               tanh(X) := sgn - sgn*Tiny.                              #
#               Exit.                                                   #
#                                                                       #
#       7. (|X| < 2**(-40)). Tanh(X) = X.       Exit.                   #
#                                                                       #
#########################################################################

        set             X,FP_SCR0
        set             XFRAC,X+4

        set             SGN,L_SCR3

        set             V,FP_SCR0

        global          stanh
stanh:
        fmov.x          (%a0),%fp0              # LOAD INPUT

        fmov.x          %fp0,X(%a6)
        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        mov.l           %d1,X(%a6)
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1, &0x3fd78000        # is |X| < 2^(-40)?
        blt.w           TANHBORS                # yes
        cmp.l           %d1, &0x3fffddce        # is |X| > (5/2)LOG2?
        bgt.w           TANHBORS                # yes

#--THIS IS THE USUAL CASE
#--Y = 2|X|, Z = EXPM1(Y), TANH(X) = SIGN(X) * Z / (Z+2).

        mov.l           X(%a6),%d1
        mov.l           %d1,SGN(%a6)
        and.l           &0x7FFF0000,%d1
        add.l           &0x00010000,%d1         # EXPONENT OF 2|X|
        mov.l           %d1,X(%a6)
        and.l           &0x80000000,SGN(%a6)
        fmov.x          X(%a6),%fp0             # FP0 IS Y = 2|X|

        mov.l           %d0,-(%sp)
        clr.l           %d0
        fmovm.x         &0x1,-(%sp)             # save Y on stack
        lea             (%sp),%a0               # pass ptr to Y
        bsr             setoxm1                 # FP0 IS Z = EXPM1(Y)
        add.l           &0xc,%sp                # clear Y from stack
        mov.l           (%sp)+,%d0

        fmov.x          %fp0,%fp1
        fadd.s          &0x40000000,%fp1        # Z+2
        mov.l           SGN(%a6),%d1
        fmov.x          %fp1,V(%a6)
        eor.l           %d1,V(%a6)

        fmov.l          %d0,%fpcr               # restore users round prec,mode
        fdiv.x          V(%a6),%fp0
        bra             t_inx2

TANHBORS:
        cmp.l           %d1,&0x3FFF8000
        blt.w           TANHSM

        cmp.l           %d1,&0x40048AA1
        bgt.w           TANHHUGE

#-- (5/2) LOG2 < |X| < 50 LOG2,
#--TANH(X) = 1 - (2/[EXP(2X)+1]). LET Y = 2|X|, SGN = SIGN(X),
#--TANH(X) = SGN -      SGN*2/[EXP(Y)+1].

        mov.l           X(%a6),%d1
        mov.l           %d1,SGN(%a6)
        and.l           &0x7FFF0000,%d1
        add.l           &0x00010000,%d1         # EXPO OF 2|X|
        mov.l           %d1,X(%a6)              # Y = 2|X|
        and.l           &0x80000000,SGN(%a6)
        mov.l           SGN(%a6),%d1
        fmov.x          X(%a6),%fp0             # Y = 2|X|

        mov.l           %d0,-(%sp)
        clr.l           %d0
        fmovm.x         &0x01,-(%sp)            # save Y on stack
        lea             (%sp),%a0               # pass ptr to Y
        bsr             setox                   # FP0 IS EXP(Y)
        add.l           &0xc,%sp                # clear Y from stack
        mov.l           (%sp)+,%d0
        mov.l           SGN(%a6),%d1
        fadd.s          &0x3F800000,%fp0        # EXP(Y)+1

        eor.l           &0xC0000000,%d1         # -SIGN(X)*2
        fmov.s          %d1,%fp1                # -SIGN(X)*2 IN SGL FMT
        fdiv.x          %fp0,%fp1               # -SIGN(X)2 / [EXP(Y)+1 ]

        mov.l           SGN(%a6),%d1
        or.l            &0x3F800000,%d1         # SGN
        fmov.s          %d1,%fp0                # SGN IN SGL FMT

        fmov.l          %d0,%fpcr               # restore users round prec,mode
        mov.b           &FADD_OP,%d1            # last inst is ADD
        fadd.x          %fp1,%fp0
        bra             t_inx2

TANHSM:
        fmov.l          %d0,%fpcr               # restore users round prec,mode
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          X(%a6),%fp0             # last inst - possible exception set
        bra             t_catch

#---RETURN SGN(X) - SGN(X)EPS
TANHHUGE:
        mov.l           X(%a6),%d1
        and.l           &0x80000000,%d1
        or.l            &0x3F800000,%d1
        fmov.s          %d1,%fp0
        and.l           &0x80000000,%d1
        eor.l           &0x80800000,%d1         # -SIGN(X)*EPS

        fmov.l          %d0,%fpcr               # restore users round prec,mode
        fadd.s          %d1,%fp0
        bra             t_inx2

        global          stanhd
#--TANH(X) = X FOR DENORMALIZED X
stanhd:
        bra             t_extdnrm

#########################################################################
# slogn():    computes the natural logarithm of a normalized input      #
# slognd():   computes the natural logarithm of a denormalized input    #
# slognp1():  computes the log(1+X) of a normalized input               #
# slognp1d(): computes the log(1+X) of a denormalized input             #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = log(X) or log(1+X)                                        #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 2 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       LOGN:                                                           #
#       Step 1. If |X-1| < 1/16, approximate log(X) by an odd           #
#               polynomial in u, where u = 2(X-1)/(X+1). Otherwise,     #
#               move on to Step 2.                                      #
#                                                                       #
#       Step 2. X = 2**k * Y where 1 <= Y < 2. Define F to be the first #
#               seven significant bits of Y plus 2**(-7), i.e.          #
#               F = 1.xxxxxx1 in base 2 where the six "x" match those   #
#               of Y. Note that |Y-F| <= 2**(-7).                       #
#                                                                       #
#       Step 3. Define u = (Y-F)/F. Approximate log(1+u) by a           #
#               polynomial in u, log(1+u) = poly.                       #
#                                                                       #
#       Step 4. Reconstruct                                             #
#               log(X) = log( 2**k * Y ) = k*log(2) + log(F) + log(1+u) #
#               by k*log(2) + (log(F) + poly). The values of log(F) are #
#               calculated beforehand and stored in the program.        #
#                                                                       #
#       lognp1:                                                         #
#       Step 1: If |X| < 1/16, approximate log(1+X) by an odd           #
#               polynomial in u where u = 2X/(2+X). Otherwise, move on  #
#               to Step 2.                                              #
#                                                                       #
#       Step 2: Let 1+X = 2**k * Y, where 1 <= Y < 2. Define F as done  #
#               in Step 2 of the algorithm for LOGN and compute         #
#               log(1+X) as k*log(2) + log(F) + poly where poly         #
#               approximates log(1+u), u = (Y-F)/F.                     #
#                                                                       #
#       Implementation Notes:                                           #
#       Note 1. There are 64 different possible values for F, thus 64   #
#               log(F)'s need to be tabulated. Moreover, the values of  #
#               1/F are also tabulated so that the division in (Y-F)/F  #
#               can be performed by a multiplication.                   #
#                                                                       #
#       Note 2. In Step 2 of lognp1, in order to preserved accuracy,    #
#               the value Y-F has to be calculated carefully when       #
#               1/2 <= X < 3/2.                                         #
#                                                                       #
#       Note 3. To fully exploit the pipeline, polynomials are usually  #
#               separated into two parts evaluated independently before #
#               being added up.                                         #
#                                                                       #
#########################################################################
LOGOF2:
        long            0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000

one:
        long            0x3F800000
zero:
        long            0x00000000
infty:
        long            0x7F800000
negone:
        long            0xBF800000

LOGA6:
        long            0x3FC2499A,0xB5E4040B
LOGA5:
        long            0xBFC555B5,0x848CB7DB

LOGA4:
        long            0x3FC99999,0x987D8730
LOGA3:
        long            0xBFCFFFFF,0xFF6F7E97

LOGA2:
        long            0x3FD55555,0x555555A4
LOGA1:
        long            0xBFE00000,0x00000008

LOGB5:
        long            0x3F175496,0xADD7DAD6
LOGB4:
        long            0x3F3C71C2,0xFE80C7E0

LOGB3:
        long            0x3F624924,0x928BCCFF
LOGB2:
        long            0x3F899999,0x999995EC

LOGB1:
        long            0x3FB55555,0x55555555
TWO:
        long            0x40000000,0x00000000

LTHOLD:
        long            0x3f990000,0x80000000,0x00000000,0x00000000

LOGTBL:
        long            0x3FFE0000,0xFE03F80F,0xE03F80FE,0x00000000
        long            0x3FF70000,0xFF015358,0x833C47E2,0x00000000
        long            0x3FFE0000,0xFA232CF2,0x52138AC0,0x00000000
        long            0x3FF90000,0xBDC8D83E,0xAD88D549,0x00000000
        long            0x3FFE0000,0xF6603D98,0x0F6603DA,0x00000000
        long            0x3FFA0000,0x9CF43DCF,0xF5EAFD48,0x00000000
        long            0x3FFE0000,0xF2B9D648,0x0F2B9D65,0x00000000
        long            0x3FFA0000,0xDA16EB88,0xCB8DF614,0x00000000
        long            0x3FFE0000,0xEF2EB71F,0xC4345238,0x00000000
        long            0x3FFB0000,0x8B29B775,0x1BD70743,0x00000000
        long            0x3FFE0000,0xEBBDB2A5,0xC1619C8C,0x00000000
        long            0x3FFB0000,0xA8D839F8,0x30C1FB49,0x00000000
        long            0x3FFE0000,0xE865AC7B,0x7603A197,0x00000000
        long            0x3FFB0000,0xC61A2EB1,0x8CD907AD,0x00000000
        long            0x3FFE0000,0xE525982A,0xF70C880E,0x00000000
        long            0x3FFB0000,0xE2F2A47A,0xDE3A18AF,0x00000000
        long            0x3FFE0000,0xE1FC780E,0x1FC780E2,0x00000000
        long            0x3FFB0000,0xFF64898E,0xDF55D551,0x00000000
        long            0x3FFE0000,0xDEE95C4C,0xA037BA57,0x00000000
        long            0x3FFC0000,0x8DB956A9,0x7B3D0148,0x00000000
        long            0x3FFE0000,0xDBEB61EE,0xD19C5958,0x00000000
        long            0x3FFC0000,0x9B8FE100,0xF47BA1DE,0x00000000
        long            0x3FFE0000,0xD901B203,0x6406C80E,0x00000000
        long            0x3FFC0000,0xA9372F1D,0x0DA1BD17,0x00000000
        long            0x3FFE0000,0xD62B80D6,0x2B80D62C,0x00000000
        long            0x3FFC0000,0xB6B07F38,0xCE90E46B,0x00000000
        long            0x3FFE0000,0xD3680D36,0x80D3680D,0x00000000
        long            0x3FFC0000,0xC3FD0329,0x06488481,0x00000000
        long            0x3FFE0000,0xD0B69FCB,0xD2580D0B,0x00000000
        long            0x3FFC0000,0xD11DE0FF,0x15AB18CA,0x00000000
        long            0x3FFE0000,0xCE168A77,0x25080CE1,0x00000000
        long            0x3FFC0000,0xDE1433A1,0x6C66B150,0x00000000
        long            0x3FFE0000,0xCB8727C0,0x65C393E0,0x00000000
        long            0x3FFC0000,0xEAE10B5A,0x7DDC8ADD,0x00000000
        long            0x3FFE0000,0xC907DA4E,0x871146AD,0x00000000
        long            0x3FFC0000,0xF7856E5E,0xE2C9B291,0x00000000
        long            0x3FFE0000,0xC6980C69,0x80C6980C,0x00000000
        long            0x3FFD0000,0x82012CA5,0xA68206D7,0x00000000
        long            0x3FFE0000,0xC4372F85,0x5D824CA6,0x00000000
        long            0x3FFD0000,0x882C5FCD,0x7256A8C5,0x00000000
        long            0x3FFE0000,0xC1E4BBD5,0x95F6E947,0x00000000
        long            0x3FFD0000,0x8E44C60B,0x4CCFD7DE,0x00000000
        long            0x3FFE0000,0xBFA02FE8,0x0BFA02FF,0x00000000
        long            0x3FFD0000,0x944AD09E,0xF4351AF6,0x00000000
        long            0x3FFE0000,0xBD691047,0x07661AA3,0x00000000
        long            0x3FFD0000,0x9A3EECD4,0xC3EAA6B2,0x00000000
        long            0x3FFE0000,0xBB3EE721,0xA54D880C,0x00000000
        long            0x3FFD0000,0xA0218434,0x353F1DE8,0x00000000
        long            0x3FFE0000,0xB92143FA,0x36F5E02E,0x00000000
        long            0x3FFD0000,0xA5F2FCAB,0xBBC506DA,0x00000000
        long            0x3FFE0000,0xB70FBB5A,0x19BE3659,0x00000000
        long            0x3FFD0000,0xABB3B8BA,0x2AD362A5,0x00000000
        long            0x3FFE0000,0xB509E68A,0x9B94821F,0x00000000
        long            0x3FFD0000,0xB1641795,0xCE3CA97B,0x00000000
        long            0x3FFE0000,0xB30F6352,0x8917C80B,0x00000000
        long            0x3FFD0000,0xB7047551,0x5D0F1C61,0x00000000
        long            0x3FFE0000,0xB11FD3B8,0x0B11FD3C,0x00000000
        long            0x3FFD0000,0xBC952AFE,0xEA3D13E1,0x00000000
        long            0x3FFE0000,0xAF3ADDC6,0x80AF3ADE,0x00000000
        long            0x3FFD0000,0xC2168ED0,0xF458BA4A,0x00000000
        long            0x3FFE0000,0xAD602B58,0x0AD602B6,0x00000000
        long            0x3FFD0000,0xC788F439,0xB3163BF1,0x00000000
        long            0x3FFE0000,0xAB8F69E2,0x8359CD11,0x00000000
        long            0x3FFD0000,0xCCECAC08,0xBF04565D,0x00000000
        long            0x3FFE0000,0xA9C84A47,0xA07F5638,0x00000000
        long            0x3FFD0000,0xD2420487,0x2DD85160,0x00000000
        long            0x3FFE0000,0xA80A80A8,0x0A80A80B,0x00000000
        long            0x3FFD0000,0xD7894992,0x3BC3588A,0x00000000
        long            0x3FFE0000,0xA655C439,0x2D7B73A8,0x00000000
        long            0x3FFD0000,0xDCC2C4B4,0x9887DACC,0x00000000
        long            0x3FFE0000,0xA4A9CF1D,0x96833751,0x00000000
        long            0x3FFD0000,0xE1EEBD3E,0x6D6A6B9E,0x00000000
        long            0x3FFE0000,0xA3065E3F,0xAE7CD0E0,0x00000000
        long            0x3FFD0000,0xE70D785C,0x2F9F5BDC,0x00000000
        long            0x3FFE0000,0xA16B312E,0xA8FC377D,0x00000000
        long            0x3FFD0000,0xEC1F392C,0x5179F283,0x00000000
        long            0x3FFE0000,0x9FD809FD,0x809FD80A,0x00000000
        long            0x3FFD0000,0xF12440D3,0xE36130E6,0x00000000
        long            0x3FFE0000,0x9E4CAD23,0xDD5F3A20,0x00000000
        long            0x3FFD0000,0xF61CCE92,0x346600BB,0x00000000
        long            0x3FFE0000,0x9CC8E160,0xC3FB19B9,0x00000000
        long            0x3FFD0000,0xFB091FD3,0x8145630A,0x00000000
        long            0x3FFE0000,0x9B4C6F9E,0xF03A3CAA,0x00000000
        long            0x3FFD0000,0xFFE97042,0xBFA4C2AD,0x00000000
        long            0x3FFE0000,0x99D722DA,0xBDE58F06,0x00000000
        long            0x3FFE0000,0x825EFCED,0x49369330,0x00000000
        long            0x3FFE0000,0x9868C809,0x868C8098,0x00000000
        long            0x3FFE0000,0x84C37A7A,0xB9A905C9,0x00000000
        long            0x3FFE0000,0x97012E02,0x5C04B809,0x00000000
        long            0x3FFE0000,0x87224C2E,0x8E645FB7,0x00000000
        long            0x3FFE0000,0x95A02568,0x095A0257,0x00000000
        long            0x3FFE0000,0x897B8CAC,0x9F7DE298,0x00000000
        long            0x3FFE0000,0x94458094,0x45809446,0x00000000
        long            0x3FFE0000,0x8BCF55DE,0xC4CD05FE,0x00000000
        long            0x3FFE0000,0x92F11384,0x0497889C,0x00000000
        long            0x3FFE0000,0x8E1DC0FB,0x89E125E5,0x00000000
        long            0x3FFE0000,0x91A2B3C4,0xD5E6F809,0x00000000
        long            0x3FFE0000,0x9066E68C,0x955B6C9B,0x00000000
        long            0x3FFE0000,0x905A3863,0x3E06C43B,0x00000000
        long            0x3FFE0000,0x92AADE74,0xC7BE59E0,0x00000000
        long            0x3FFE0000,0x8F1779D9,0xFDC3A219,0x00000000
        long            0x3FFE0000,0x94E9BFF6,0x15845643,0x00000000
        long            0x3FFE0000,0x8DDA5202,0x37694809,0x00000000
        long            0x3FFE0000,0x9723A1B7,0x20134203,0x00000000
        long            0x3FFE0000,0x8CA29C04,0x6514E023,0x00000000
        long            0x3FFE0000,0x995899C8,0x90EB8990,0x00000000
        long            0x3FFE0000,0x8B70344A,0x139BC75A,0x00000000
        long            0x3FFE0000,0x9B88BDAA,0x3A3DAE2F,0x00000000
        long            0x3FFE0000,0x8A42F870,0x5669DB46,0x00000000
        long            0x3FFE0000,0x9DB4224F,0xFFE1157C,0x00000000
        long            0x3FFE0000,0x891AC73A,0xE9819B50,0x00000000
        long            0x3FFE0000,0x9FDADC26,0x8B7A12DA,0x00000000
        long            0x3FFE0000,0x87F78087,0xF78087F8,0x00000000
        long            0x3FFE0000,0xA1FCFF17,0xCE733BD4,0x00000000
        long            0x3FFE0000,0x86D90544,0x7A34ACC6,0x00000000
        long            0x3FFE0000,0xA41A9E8F,0x5446FB9F,0x00000000
        long            0x3FFE0000,0x85BF3761,0x2CEE3C9B,0x00000000
        long            0x3FFE0000,0xA633CD7E,0x6771CD8B,0x00000000
        long            0x3FFE0000,0x84A9F9C8,0x084A9F9D,0x00000000
        long            0x3FFE0000,0xA8489E60,0x0B435A5E,0x00000000
        long            0x3FFE0000,0x83993052,0x3FBE3368,0x00000000
        long            0x3FFE0000,0xAA59233C,0xCCA4BD49,0x00000000
        long            0x3FFE0000,0x828CBFBE,0xB9A020A3,0x00000000
        long            0x3FFE0000,0xAC656DAE,0x6BCC4985,0x00000000
        long            0x3FFE0000,0x81848DA8,0xFAF0D277,0x00000000
        long            0x3FFE0000,0xAE6D8EE3,0x60BB2468,0x00000000
        long            0x3FFE0000,0x80808080,0x80808081,0x00000000
        long            0x3FFE0000,0xB07197A2,0x3C46C654,0x00000000

        set             ADJK,L_SCR1

        set             X,FP_SCR0
        set             XDCARE,X+2
        set             XFRAC,X+4

        set             F,FP_SCR1
        set             FFRAC,F+4

        set             KLOG2,FP_SCR0

        set             SAVEU,FP_SCR0

        global          slogn
#--ENTRY POINT FOR LOG(X) FOR X FINITE, NON-ZERO, NOT NAN'S
slogn:
        fmov.x          (%a0),%fp0              # LOAD INPUT
        mov.l           &0x00000000,ADJK(%a6)

LOGBGN:
#--FPCR SAVED AND CLEARED, INPUT IS 2^(ADJK)*FP0, FP0 CONTAINS
#--A FINITE, NON-ZERO, NORMALIZED NUMBER.

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1

        mov.l           (%a0),X(%a6)
        mov.l           4(%a0),X+4(%a6)
        mov.l           8(%a0),X+8(%a6)

        cmp.l           %d1,&0                  # CHECK IF X IS NEGATIVE
        blt.w           LOGNEG                  # LOG OF NEGATIVE ARGUMENT IS INVALID
# X IS POSITIVE, CHECK IF X IS NEAR 1
        cmp.l           %d1,&0x3ffef07d         # IS X < 15/16?
        blt.b           LOGMAIN                 # YES
        cmp.l           %d1,&0x3fff8841         # IS X > 17/16?
        ble.w           LOGNEAR1                # NO

LOGMAIN:
#--THIS SHOULD BE THE USUAL CASE, X NOT VERY CLOSE TO 1

#--X = 2^(K) * Y, 1 <= Y < 2. THUS, Y = 1.XXXXXXXX....XX IN BINARY.
#--WE DEFINE F = 1.XXXXXX1, I.E. FIRST 7 BITS OF Y AND ATTACH A 1.
#--THE IDEA IS THAT LOG(X) = K*LOG2 + LOG(Y)
#--                      = K*LOG2 + LOG(F) + LOG(1 + (Y-F)/F).
#--NOTE THAT U = (Y-F)/F IS VERY SMALL AND THUS APPROXIMATING
#--LOG(1+U) CAN BE VERY EFFICIENT.
#--ALSO NOTE THAT THE VALUE 1/F IS STORED IN A TABLE SO THAT NO
#--DIVISION IS NEEDED TO CALCULATE (Y-F)/F.

#--GET K, Y, F, AND ADDRESS OF 1/F.
        asr.l           &8,%d1
        asr.l           &8,%d1                  # SHIFTED 16 BITS, BIASED EXPO. OF X
        sub.l           &0x3FFF,%d1             # THIS IS K
        add.l           ADJK(%a6),%d1           # ADJUST K, ORIGINAL INPUT MAY BE  DENORM.
        lea             LOGTBL(%pc),%a0         # BASE ADDRESS OF 1/F AND LOG(F)
        fmov.l          %d1,%fp1                # CONVERT K TO FLOATING-POINT FORMAT

#--WHILE THE CONVERSION IS GOING ON, WE GET F AND ADDRESS OF 1/F
        mov.l           &0x3FFF0000,X(%a6)      # X IS NOW Y, I.E. 2^(-K)*X
        mov.l           XFRAC(%a6),FFRAC(%a6)
        and.l           &0xFE000000,FFRAC(%a6)  # FIRST 7 BITS OF Y
        or.l            &0x01000000,FFRAC(%a6)  # GET F: ATTACH A 1 AT THE EIGHTH BIT
        mov.l           FFRAC(%a6),%d1  # READY TO GET ADDRESS OF 1/F
        and.l           &0x7E000000,%d1
        asr.l           &8,%d1
        asr.l           &8,%d1
        asr.l           &4,%d1                  # SHIFTED 20, D0 IS THE DISPLACEMENT
        add.l           %d1,%a0                 # A0 IS THE ADDRESS FOR 1/F

        fmov.x          X(%a6),%fp0
        mov.l           &0x3fff0000,F(%a6)
        clr.l           F+8(%a6)
        fsub.x          F(%a6),%fp0             # Y-F
        fmovm.x         &0xc,-(%sp)             # SAVE FP2-3 WHILE FP0 IS NOT READY
#--SUMMARY: FP0 IS Y-F, A0 IS ADDRESS OF 1/F, FP1 IS K
#--REGISTERS SAVED: FPCR, FP1, FP2

LP1CONT1:
#--AN RE-ENTRY POINT FOR LOGNP1
        fmul.x          (%a0),%fp0              # FP0 IS U = (Y-F)/F
        fmul.x          LOGOF2(%pc),%fp1        # GET K*LOG2 WHILE FP0 IS NOT READY
        fmov.x          %fp0,%fp2
        fmul.x          %fp2,%fp2               # FP2 IS V=U*U
        fmov.x          %fp1,KLOG2(%a6)         # PUT K*LOG2 IN MEMEORY, FREE FP1

#--LOG(1+U) IS APPROXIMATED BY
#--U + V*(A1+U*(A2+U*(A3+U*(A4+U*(A5+U*A6))))) WHICH IS
#--[U + V*(A1+V*(A3+V*A5))]  +  [U*V*(A2+V*(A4+V*A6))]

        fmov.x          %fp2,%fp3
        fmov.x          %fp2,%fp1

        fmul.d          LOGA6(%pc),%fp1         # V*A6
        fmul.d          LOGA5(%pc),%fp2         # V*A5

        fadd.d          LOGA4(%pc),%fp1         # A4+V*A6
        fadd.d          LOGA3(%pc),%fp2         # A3+V*A5

        fmul.x          %fp3,%fp1               # V*(A4+V*A6)
        fmul.x          %fp3,%fp2               # V*(A3+V*A5)

        fadd.d          LOGA2(%pc),%fp1         # A2+V*(A4+V*A6)
        fadd.d          LOGA1(%pc),%fp2         # A1+V*(A3+V*A5)

        fmul.x          %fp3,%fp1               # V*(A2+V*(A4+V*A6))
        add.l           &16,%a0                 # ADDRESS OF LOG(F)
        fmul.x          %fp3,%fp2               # V*(A1+V*(A3+V*A5))

        fmul.x          %fp0,%fp1               # U*V*(A2+V*(A4+V*A6))
        fadd.x          %fp2,%fp0               # U+V*(A1+V*(A3+V*A5))

        fadd.x          (%a0),%fp1              # LOG(F)+U*V*(A2+V*(A4+V*A6))
        fmovm.x         (%sp)+,&0x30            # RESTORE FP2-3
        fadd.x          %fp1,%fp0               # FP0 IS LOG(F) + LOG(1+U)

        fmov.l          %d0,%fpcr
        fadd.x          KLOG2(%a6),%fp0         # FINAL ADD
        bra             t_inx2


LOGNEAR1:

# if the input is exactly equal to one, then exit through ld_pzero.
# if these 2 lines weren't here, the correct answer would be returned
# but the INEX2 bit would be set.
        fcmp.b          %fp0,&0x1               # is it equal to one?
        fbeq.l          ld_pzero                # yes

#--REGISTERS SAVED: FPCR, FP1. FP0 CONTAINS THE INPUT.
        fmov.x          %fp0,%fp1
        fsub.s          one(%pc),%fp1           # FP1 IS X-1
        fadd.s          one(%pc),%fp0           # FP0 IS X+1
        fadd.x          %fp1,%fp1               # FP1 IS 2(X-1)
#--LOG(X) = LOG(1+U/2)-LOG(1-U/2) WHICH IS AN ODD POLYNOMIAL
#--IN U, U = 2(X-1)/(X+1) = FP1/FP0

LP1CONT2:
#--THIS IS AN RE-ENTRY POINT FOR LOGNP1
        fdiv.x          %fp0,%fp1               # FP1 IS U
        fmovm.x         &0xc,-(%sp)             # SAVE FP2-3
#--REGISTERS SAVED ARE NOW FPCR,FP1,FP2,FP3
#--LET V=U*U, W=V*V, CALCULATE
#--U + U*V*(B1 + V*(B2 + V*(B3 + V*(B4 + V*B5)))) BY
#--U + U*V*(  [B1 + W*(B3 + W*B5)]  +  [V*(B2 + W*B4)]  )
        fmov.x          %fp1,%fp0
        fmul.x          %fp0,%fp0               # FP0 IS V
        fmov.x          %fp1,SAVEU(%a6)         # STORE U IN MEMORY, FREE FP1
        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS W

        fmov.d          LOGB5(%pc),%fp3
        fmov.d          LOGB4(%pc),%fp2

        fmul.x          %fp1,%fp3               # W*B5
        fmul.x          %fp1,%fp2               # W*B4

        fadd.d          LOGB3(%pc),%fp3         # B3+W*B5
        fadd.d          LOGB2(%pc),%fp2         # B2+W*B4

        fmul.x          %fp3,%fp1               # W*(B3+W*B5), FP3 RELEASED

        fmul.x          %fp0,%fp2               # V*(B2+W*B4)

        fadd.d          LOGB1(%pc),%fp1         # B1+W*(B3+W*B5)
        fmul.x          SAVEU(%a6),%fp0         # FP0 IS U*V

        fadd.x          %fp2,%fp1               # B1+W*(B3+W*B5) + V*(B2+W*B4), FP2 RELEASED
        fmovm.x         (%sp)+,&0x30            # FP2-3 RESTORED

        fmul.x          %fp1,%fp0               # U*V*( [B1+W*(B3+W*B5)] + [V*(B2+W*B4)] )

        fmov.l          %d0,%fpcr
        fadd.x          SAVEU(%a6),%fp0
        bra             t_inx2

#--REGISTERS SAVED FPCR. LOG(-VE) IS INVALID
LOGNEG:
        bra             t_operr

        global          slognd
slognd:
#--ENTRY POINT FOR LOG(X) FOR DENORMALIZED INPUT

        mov.l           &-100,ADJK(%a6)         # INPUT = 2^(ADJK) * FP0

#----normalize the input value by left shifting k bits (k to be determined
#----below), adjusting exponent and storing -k to  ADJK
#----the value TWOTO100 is no longer needed.
#----Note that this code assumes the denormalized input is NON-ZERO.

        movm.l          &0x3f00,-(%sp)          # save some registers  {d2-d7}
        mov.l           (%a0),%d3               # D3 is exponent of smallest norm. #
        mov.l           4(%a0),%d4
        mov.l           8(%a0),%d5              # (D4,D5) is (Hi_X,Lo_X)
        clr.l           %d2                     # D2 used for holding K

        tst.l           %d4
        bne.b           Hi_not0

Hi_0:
        mov.l           %d5,%d4
        clr.l           %d5
        mov.l           &32,%d2
        clr.l           %d6
        bfffo           %d4{&0:&32},%d6
        lsl.l           %d6,%d4
        add.l           %d6,%d2                 # (D3,D4,D5) is normalized

        mov.l           %d3,X(%a6)
        mov.l           %d4,XFRAC(%a6)
        mov.l           %d5,XFRAC+4(%a6)
        neg.l           %d2
        mov.l           %d2,ADJK(%a6)
        fmov.x          X(%a6),%fp0
        movm.l          (%sp)+,&0xfc            # restore registers {d2-d7}
        lea             X(%a6),%a0
        bra.w           LOGBGN                  # begin regular log(X)

Hi_not0:
        clr.l           %d6
        bfffo           %d4{&0:&32},%d6         # find first 1
        mov.l           %d6,%d2                 # get k
        lsl.l           %d6,%d4
        mov.l           %d5,%d7                 # a copy of D5
        lsl.l           %d6,%d5
        neg.l           %d6
        add.l           &32,%d6
        lsr.l           %d6,%d7
        or.l            %d7,%d4                 # (D3,D4,D5) normalized

        mov.l           %d3,X(%a6)
        mov.l           %d4,XFRAC(%a6)
        mov.l           %d5,XFRAC+4(%a6)
        neg.l           %d2
        mov.l           %d2,ADJK(%a6)
        fmov.x          X(%a6),%fp0
        movm.l          (%sp)+,&0xfc            # restore registers {d2-d7}
        lea             X(%a6),%a0
        bra.w           LOGBGN                  # begin regular log(X)

        global          slognp1
#--ENTRY POINT FOR LOG(1+X) FOR X FINITE, NON-ZERO, NOT NAN'S
slognp1:
        fmov.x          (%a0),%fp0              # LOAD INPUT
        fabs.x          %fp0                    # test magnitude
        fcmp.x          %fp0,LTHOLD(%pc)        # compare with min threshold
        fbgt.w          LP1REAL                 # if greater, continue
        fmov.l          %d0,%fpcr
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          (%a0),%fp0              # return signed argument
        bra             t_catch

LP1REAL:
        fmov.x          (%a0),%fp0              # LOAD INPUT
        mov.l           &0x00000000,ADJK(%a6)
        fmov.x          %fp0,%fp1               # FP1 IS INPUT Z
        fadd.s          one(%pc),%fp0           # X := ROUND(1+Z)
        fmov.x          %fp0,X(%a6)
        mov.w           XFRAC(%a6),XDCARE(%a6)
        mov.l           X(%a6),%d1
        cmp.l           %d1,&0
        ble.w           LP1NEG0                 # LOG OF ZERO OR -VE
        cmp.l           %d1,&0x3ffe8000         # IS BOUNDS [1/2,3/2]?
        blt.w           LOGMAIN
        cmp.l           %d1,&0x3fffc000
        bgt.w           LOGMAIN
#--IF 1+Z > 3/2 OR 1+Z < 1/2, THEN X, WHICH IS ROUNDING 1+Z,
#--CONTAINS AT LEAST 63 BITS OF INFORMATION OF Z. IN THAT CASE,
#--SIMPLY INVOKE LOG(X) FOR LOG(1+Z).

LP1NEAR1:
#--NEXT SEE IF EXP(-1/16) < X < EXP(1/16)
        cmp.l           %d1,&0x3ffef07d
        blt.w           LP1CARE
        cmp.l           %d1,&0x3fff8841
        bgt.w           LP1CARE

LP1ONE16:
#--EXP(-1/16) < X < EXP(1/16). LOG(1+Z) = LOG(1+U/2) - LOG(1-U/2)
#--WHERE U = 2Z/(2+Z) = 2Z/(1+X).
        fadd.x          %fp1,%fp1               # FP1 IS 2Z
        fadd.s          one(%pc),%fp0           # FP0 IS 1+X
#--U = FP1/FP0
        bra.w           LP1CONT2

LP1CARE:
#--HERE WE USE THE USUAL TABLE DRIVEN APPROACH. CARE HAS TO BE
#--TAKEN BECAUSE 1+Z CAN HAVE 67 BITS OF INFORMATION AND WE MUST
#--PRESERVE ALL THE INFORMATION. BECAUSE 1+Z IS IN [1/2,3/2],
#--THERE ARE ONLY TWO CASES.
#--CASE 1: 1+Z < 1, THEN K = -1 AND Y-F = (2-F) + 2Z
#--CASE 2: 1+Z > 1, THEN K = 0  AND Y-F = (1-F) + Z
#--ON RETURNING TO LP1CONT1, WE MUST HAVE K IN FP1, ADDRESS OF
#--(1/F) IN A0, Y-F IN FP0, AND FP2 SAVED.

        mov.l           XFRAC(%a6),FFRAC(%a6)
        and.l           &0xFE000000,FFRAC(%a6)
        or.l            &0x01000000,FFRAC(%a6)  # F OBTAINED
        cmp.l           %d1,&0x3FFF8000         # SEE IF 1+Z > 1
        bge.b           KISZERO

KISNEG1:
        fmov.s          TWO(%pc),%fp0
        mov.l           &0x3fff0000,F(%a6)
        clr.l           F+8(%a6)
        fsub.x          F(%a6),%fp0             # 2-F
        mov.l           FFRAC(%a6),%d1
        and.l           &0x7E000000,%d1
        asr.l           &8,%d1
        asr.l           &8,%d1
        asr.l           &4,%d1                  # D0 CONTAINS DISPLACEMENT FOR 1/F
        fadd.x          %fp1,%fp1               # GET 2Z
        fmovm.x         &0xc,-(%sp)             # SAVE FP2  {%fp2/%fp3}
        fadd.x          %fp1,%fp0               # FP0 IS Y-F = (2-F)+2Z
        lea             LOGTBL(%pc),%a0         # A0 IS ADDRESS OF 1/F
        add.l           %d1,%a0
        fmov.s          negone(%pc),%fp1        # FP1 IS K = -1
        bra.w           LP1CONT1

KISZERO:
        fmov.s          one(%pc),%fp0
        mov.l           &0x3fff0000,F(%a6)
        clr.l           F+8(%a6)
        fsub.x          F(%a6),%fp0             # 1-F
        mov.l           FFRAC(%a6),%d1
        and.l           &0x7E000000,%d1
        asr.l           &8,%d1
        asr.l           &8,%d1
        asr.l           &4,%d1
        fadd.x          %fp1,%fp0               # FP0 IS Y-F
        fmovm.x         &0xc,-(%sp)             # FP2 SAVED {%fp2/%fp3}
        lea             LOGTBL(%pc),%a0
        add.l           %d1,%a0                 # A0 IS ADDRESS OF 1/F
        fmov.s          zero(%pc),%fp1          # FP1 IS K = 0
        bra.w           LP1CONT1

LP1NEG0:
#--FPCR SAVED. D0 IS X IN COMPACT FORM.
        cmp.l           %d1,&0
        blt.b           LP1NEG
LP1ZERO:
        fmov.s          negone(%pc),%fp0

        fmov.l          %d0,%fpcr
        bra             t_dz

LP1NEG:
        fmov.s          zero(%pc),%fp0

        fmov.l          %d0,%fpcr
        bra             t_operr

        global          slognp1d
#--ENTRY POINT FOR LOG(1+Z) FOR DENORMALIZED INPUT
# Simply return the denorm
slognp1d:
        bra             t_extdnrm

#########################################################################
# satanh():  computes the inverse hyperbolic tangent of a norm input    #
# satanhd(): computes the inverse hyperbolic tangent of a denorm input  #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = arctanh(X)                                                #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 3 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       ATANH                                                           #
#       1. If |X| >= 1, go to 3.                                        #
#                                                                       #
#       2. (|X| < 1) Calculate atanh(X) by                              #
#               sgn := sign(X)                                          #
#               y := |X|                                                #
#               z := 2y/(1-y)                                           #
#               atanh(X) := sgn * (1/2) * logp1(z)                      #
#               Exit.                                                   #
#                                                                       #
#       3. If |X| > 1, go to 5.                                         #
#                                                                       #
#       4. (|X| = 1) Generate infinity with an appropriate sign and     #
#               divide-by-zero by                                       #
#               sgn := sign(X)                                          #
#               atan(X) := sgn / (+0).                                  #
#               Exit.                                                   #
#                                                                       #
#       5. (|X| > 1) Generate an invalid operation by 0 * infinity.     #
#               Exit.                                                   #
#                                                                       #
#########################################################################

        global          satanh
satanh:
        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1
        cmp.l           %d1,&0x3FFF8000
        bge.b           ATANHBIG

#--THIS IS THE USUAL CASE, |X| < 1
#--Y = |X|, Z = 2Y/(1-Y), ATANH(X) = SIGN(X) * (1/2) * LOG1P(Z).

        fabs.x          (%a0),%fp0              # Y = |X|
        fmov.x          %fp0,%fp1
        fneg.x          %fp1                    # -Y
        fadd.x          %fp0,%fp0               # 2Y
        fadd.s          &0x3F800000,%fp1        # 1-Y
        fdiv.x          %fp1,%fp0               # 2Y/(1-Y)
        mov.l           (%a0),%d1
        and.l           &0x80000000,%d1
        or.l            &0x3F000000,%d1         # SIGN(X)*HALF
        mov.l           %d1,-(%sp)

        mov.l           %d0,-(%sp)              # save rnd prec,mode
        clr.l           %d0                     # pass ext prec,RN
        fmovm.x         &0x01,-(%sp)            # save Z on stack
        lea             (%sp),%a0               # pass ptr to Z
        bsr             slognp1                 # LOG1P(Z)
        add.l           &0xc,%sp                # clear Z from stack

        mov.l           (%sp)+,%d0              # fetch old prec,mode
        fmov.l          %d0,%fpcr               # load it
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.s          (%sp)+,%fp0
        bra             t_catch

ATANHBIG:
        fabs.x          (%a0),%fp0              # |X|
        fcmp.s          %fp0,&0x3F800000
        fbgt            t_operr
        bra             t_dz

        global          satanhd
#--ATANH(X) = X FOR DENORMALIZED X
satanhd:
        bra             t_extdnrm

#########################################################################
# slog10():  computes the base-10 logarithm of a normalized input       #
# slog10d(): computes the base-10 logarithm of a denormalized input     #
# slog2():   computes the base-2 logarithm of a normalized input        #
# slog2d():  computes the base-2 logarithm of a denormalized input      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = log_10(X) or log_2(X)                                     #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 1.7 ulps in 64 significant bit,   #
#       i.e. within 0.5003 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       slog10d:                                                        #
#                                                                       #
#       Step 0. If X < 0, create a NaN and raise the invalid operation  #
#               flag. Otherwise, save FPCR in D1; set FpCR to default.  #
#       Notes:  Default means round-to-nearest mode, no floating-point  #
#               traps, and precision control = double extended.         #
#                                                                       #
#       Step 1. Call slognd to obtain Y = log(X), the natural log of X. #
#       Notes:  Even if X is denormalized, log(X) is always normalized. #
#                                                                       #
#       Step 2.  Compute log_10(X) = log(X) * (1/log(10)).              #
#            2.1 Restore the user FPCR                                  #
#            2.2 Return ans := Y * INV_L10.                             #
#                                                                       #
#       slog10:                                                         #
#                                                                       #
#       Step 0. If X < 0, create a NaN and raise the invalid operation  #
#               flag. Otherwise, save FPCR in D1; set FpCR to default.  #
#       Notes:  Default means round-to-nearest mode, no floating-point  #
#               traps, and precision control = double extended.         #
#                                                                       #
#       Step 1. Call sLogN to obtain Y = log(X), the natural log of X.  #
#                                                                       #
#       Step 2.   Compute log_10(X) = log(X) * (1/log(10)).             #
#            2.1  Restore the user FPCR                                 #
#            2.2  Return ans := Y * INV_L10.                            #
#                                                                       #
#       sLog2d:                                                         #
#                                                                       #
#       Step 0. If X < 0, create a NaN and raise the invalid operation  #
#               flag. Otherwise, save FPCR in D1; set FpCR to default.  #
#       Notes:  Default means round-to-nearest mode, no floating-point  #
#               traps, and precision control = double extended.         #
#                                                                       #
#       Step 1. Call slognd to obtain Y = log(X), the natural log of X. #
#       Notes:  Even if X is denormalized, log(X) is always normalized. #
#                                                                       #
#       Step 2.   Compute log_10(X) = log(X) * (1/log(2)).              #
#            2.1  Restore the user FPCR                                 #
#            2.2  Return ans := Y * INV_L2.                             #
#                                                                       #
#       sLog2:                                                          #
#                                                                       #
#       Step 0. If X < 0, create a NaN and raise the invalid operation  #
#               flag. Otherwise, save FPCR in D1; set FpCR to default.  #
#       Notes:  Default means round-to-nearest mode, no floating-point  #
#               traps, and precision control = double extended.         #
#                                                                       #
#       Step 1. If X is not an integer power of two, i.e., X != 2^k,    #
#               go to Step 3.                                           #
#                                                                       #
#       Step 2.   Return k.                                             #
#            2.1  Get integer k, X = 2^k.                               #
#            2.2  Restore the user FPCR.                                #
#            2.3  Return ans := convert-to-double-extended(k).          #
#                                                                       #
#       Step 3. Call sLogN to obtain Y = log(X), the natural log of X.  #
#                                                                       #
#       Step 4.   Compute log_2(X) = log(X) * (1/log(2)).               #
#            4.1  Restore the user FPCR                                 #
#            4.2  Return ans := Y * INV_L2.                             #
#                                                                       #
#########################################################################

INV_L10:
        long            0x3FFD0000,0xDE5BD8A9,0x37287195,0x00000000

INV_L2:
        long            0x3FFF0000,0xB8AA3B29,0x5C17F0BC,0x00000000

        global          slog10
#--entry point for Log10(X), X is normalized
slog10:
        fmov.b          &0x1,%fp0
        fcmp.x          %fp0,(%a0)              # if operand == 1,
        fbeq.l          ld_pzero                # return an EXACT zero

        mov.l           (%a0),%d1
        blt.w           invalid
        mov.l           %d0,-(%sp)
        clr.l           %d0
        bsr             slogn                   # log(X), X normal.
        fmov.l          (%sp)+,%fpcr
        fmul.x          INV_L10(%pc),%fp0
        bra             t_inx2

        global          slog10d
#--entry point for Log10(X), X is denormalized
slog10d:
        mov.l           (%a0),%d1
        blt.w           invalid
        mov.l           %d0,-(%sp)
        clr.l           %d0
        bsr             slognd                  # log(X), X denorm.
        fmov.l          (%sp)+,%fpcr
        fmul.x          INV_L10(%pc),%fp0
        bra             t_minx2

        global          slog2
#--entry point for Log2(X), X is normalized
slog2:
        mov.l           (%a0),%d1
        blt.w           invalid

        mov.l           8(%a0),%d1
        bne.b           continue                # X is not 2^k

        mov.l           4(%a0),%d1
        and.l           &0x7FFFFFFF,%d1
        bne.b           continue

#--X = 2^k.
        mov.w           (%a0),%d1
        and.l           &0x00007FFF,%d1
        sub.l           &0x3FFF,%d1
        beq.l           ld_pzero
        fmov.l          %d0,%fpcr
        fmov.l          %d1,%fp0
        bra             t_inx2

continue:
        mov.l           %d0,-(%sp)
        clr.l           %d0
        bsr             slogn                   # log(X), X normal.
        fmov.l          (%sp)+,%fpcr
        fmul.x          INV_L2(%pc),%fp0
        bra             t_inx2

invalid:
        bra             t_operr

        global          slog2d
#--entry point for Log2(X), X is denormalized
slog2d:
        mov.l           (%a0),%d1
        blt.w           invalid
        mov.l           %d0,-(%sp)
        clr.l           %d0
        bsr             slognd                  # log(X), X denorm.
        fmov.l          (%sp)+,%fpcr
        fmul.x          INV_L2(%pc),%fp0
        bra             t_minx2

#########################################################################
# stwotox():  computes 2**X for a normalized input                      #
# stwotoxd(): computes 2**X for a denormalized input                    #
# stentox():  computes 10**X for a normalized input                     #
# stentoxd(): computes 10**X for a denormalized input                   #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input                        #
#       d0 = round precision,mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = 2**X or 10**X                                             #
#                                                                       #
# ACCURACY and MONOTONICITY ******************************************* #
#       The returned result is within 2 ulps in 64 significant bit,     #
#       i.e. within 0.5001 ulp to 53 bits if the result is subsequently #
#       rounded to double precision. The result is provably monotonic   #
#       in double precision.                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       twotox                                                          #
#       1. If |X| > 16480, go to ExpBig.                                #
#                                                                       #
#       2. If |X| < 2**(-70), go to ExpSm.                              #
#                                                                       #
#       3. Decompose X as X = N/64 + r where |r| <= 1/128. Furthermore  #
#               decompose N as                                          #
#                N = 64(M + M') + j,  j = 0,1,2,...,63.                 #
#                                                                       #
#       4. Overwrite r := r * log2. Then                                #
#               2**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).           #
#               Go to expr to compute that expression.                  #
#                                                                       #
#       tentox                                                          #
#       1. If |X| > 16480*log_10(2) (base 10 log of 2), go to ExpBig.   #
#                                                                       #
#       2. If |X| < 2**(-70), go to ExpSm.                              #
#                                                                       #
#       3. Set y := X*log_2(10)*64 (base 2 log of 10). Set              #
#               N := round-to-int(y). Decompose N as                    #
#                N = 64(M + M') + j,  j = 0,1,2,...,63.                 #
#                                                                       #
#       4. Define r as                                                  #
#               r := ((X - N*L1)-N*L2) * L10                            #
#               where L1, L2 are the leading and trailing parts of      #
#               log_10(2)/64 and L10 is the natural log of 10. Then     #
#               10**X = 2**(M') * 2**(M) * 2**(j/64) * exp(r).          #
#               Go to expr to compute that expression.                  #
#                                                                       #
#       expr                                                            #
#       1. Fetch 2**(j/64) from table as Fact1 and Fact2.               #
#                                                                       #
#       2. Overwrite Fact1 and Fact2 by                                 #
#               Fact1 := 2**(M) * Fact1                                 #
#               Fact2 := 2**(M) * Fact2                                 #
#               Thus Fact1 + Fact2 = 2**(M) * 2**(j/64).                #
#                                                                       #
#       3. Calculate P where 1 + P approximates exp(r):                 #
#               P = r + r*r*(A1+r*(A2+...+r*A5)).                       #
#                                                                       #
#       4. Let AdjFact := 2**(M'). Return                               #
#               AdjFact * ( Fact1 + ((Fact1*P) + Fact2) ).              #
#               Exit.                                                   #
#                                                                       #
#       ExpBig                                                          #
#       1. Generate overflow by Huge * Huge if X > 0; otherwise,        #
#               generate underflow by Tiny * Tiny.                      #
#                                                                       #
#       ExpSm                                                           #
#       1. Return 1 + X.                                                #
#                                                                       #
#########################################################################

L2TEN64:
        long            0x406A934F,0x0979A371   # 64LOG10/LOG2
L10TWO1:
        long            0x3F734413,0x509F8000   # LOG2/64LOG10

L10TWO2:
        long            0xBFCD0000,0xC0219DC1,0xDA994FD2,0x00000000

LOG10:  long            0x40000000,0x935D8DDD,0xAAA8AC17,0x00000000

LOG2:   long            0x3FFE0000,0xB17217F7,0xD1CF79AC,0x00000000

EXPA5:  long            0x3F56C16D,0x6F7BD0B2
EXPA4:  long            0x3F811112,0x302C712C
EXPA3:  long            0x3FA55555,0x55554CC1
EXPA2:  long            0x3FC55555,0x55554A54
EXPA1:  long            0x3FE00000,0x00000000,0x00000000,0x00000000

TEXPTBL:
        long            0x3FFF0000,0x80000000,0x00000000,0x3F738000
        long            0x3FFF0000,0x8164D1F3,0xBC030773,0x3FBEF7CA
        long            0x3FFF0000,0x82CD8698,0xAC2BA1D7,0x3FBDF8A9
        long            0x3FFF0000,0x843A28C3,0xACDE4046,0x3FBCD7C9
        long            0x3FFF0000,0x85AAC367,0xCC487B15,0xBFBDE8DA
        long            0x3FFF0000,0x871F6196,0x9E8D1010,0x3FBDE85C
        long            0x3FFF0000,0x88980E80,0x92DA8527,0x3FBEBBF1
        long            0x3FFF0000,0x8A14D575,0x496EFD9A,0x3FBB80CA
        long            0x3FFF0000,0x8B95C1E3,0xEA8BD6E7,0xBFBA8373
        long            0x3FFF0000,0x8D1ADF5B,0x7E5BA9E6,0xBFBE9670
        long            0x3FFF0000,0x8EA4398B,0x45CD53C0,0x3FBDB700
        long            0x3FFF0000,0x9031DC43,0x1466B1DC,0x3FBEEEB0
        long            0x3FFF0000,0x91C3D373,0xAB11C336,0x3FBBFD6D
        long            0x3FFF0000,0x935A2B2F,0x13E6E92C,0xBFBDB319
        long            0x3FFF0000,0x94F4EFA8,0xFEF70961,0x3FBDBA2B
        long            0x3FFF0000,0x96942D37,0x20185A00,0x3FBE91D5
        long            0x3FFF0000,0x9837F051,0x8DB8A96F,0x3FBE8D5A
        long            0x3FFF0000,0x99E04593,0x20B7FA65,0xBFBCDE7B
        long            0x3FFF0000,0x9B8D39B9,0xD54E5539,0xBFBEBAAF
        long            0x3FFF0000,0x9D3ED9A7,0x2CFFB751,0xBFBD86DA
        long            0x3FFF0000,0x9EF53260,0x91A111AE,0xBFBEBEDD
        long            0x3FFF0000,0xA0B0510F,0xB9714FC2,0x3FBCC96E
        long            0x3FFF0000,0xA2704303,0x0C496819,0xBFBEC90B
        long            0x3FFF0000,0xA43515AE,0x09E6809E,0x3FBBD1DB
        long            0x3FFF0000,0xA5FED6A9,0xB15138EA,0x3FBCE5EB
        long            0x3FFF0000,0xA7CD93B4,0xE965356A,0xBFBEC274
        long            0x3FFF0000,0xA9A15AB4,0xEA7C0EF8,0x3FBEA83C
        long            0x3FFF0000,0xAB7A39B5,0xA93ED337,0x3FBECB00
        long            0x3FFF0000,0xAD583EEA,0x42A14AC6,0x3FBE9301
        long            0x3FFF0000,0xAF3B78AD,0x690A4375,0xBFBD8367
        long            0x3FFF0000,0xB123F581,0xD2AC2590,0xBFBEF05F
        long            0x3FFF0000,0xB311C412,0xA9112489,0x3FBDFB3C
        long            0x3FFF0000,0xB504F333,0xF9DE6484,0x3FBEB2FB
        long            0x3FFF0000,0xB6FD91E3,0x28D17791,0x3FBAE2CB
        long            0x3FFF0000,0xB8FBAF47,0x62FB9EE9,0x3FBCDC3C
        long            0x3FFF0000,0xBAFF5AB2,0x133E45FB,0x3FBEE9AA
        long            0x3FFF0000,0xBD08A39F,0x580C36BF,0xBFBEAEFD
        long            0x3FFF0000,0xBF1799B6,0x7A731083,0xBFBCBF51
        long            0x3FFF0000,0xC12C4CCA,0x66709456,0x3FBEF88A
        long            0x3FFF0000,0xC346CCDA,0x24976407,0x3FBD83B2
        long            0x3FFF0000,0xC5672A11,0x5506DADD,0x3FBDF8AB
        long            0x3FFF0000,0xC78D74C8,0xABB9B15D,0xBFBDFB17
        long            0x3FFF0000,0xC9B9BD86,0x6E2F27A3,0xBFBEFE3C
        long            0x3FFF0000,0xCBEC14FE,0xF2727C5D,0xBFBBB6F8
        long            0x3FFF0000,0xCE248C15,0x1F8480E4,0xBFBCEE53
        long            0x3FFF0000,0xD06333DA,0xEF2B2595,0xBFBDA4AE
        long            0x3FFF0000,0xD2A81D91,0xF12AE45A,0x3FBC9124
        long            0x3FFF0000,0xD4F35AAB,0xCFEDFA1F,0x3FBEB243
        long            0x3FFF0000,0xD744FCCA,0xD69D6AF4,0x3FBDE69A
        long            0x3FFF0000,0xD99D15C2,0x78AFD7B6,0xBFB8BC61
        long            0x3FFF0000,0xDBFBB797,0xDAF23755,0x3FBDF610
        long            0x3FFF0000,0xDE60F482,0x5E0E9124,0xBFBD8BE1
        long            0x3FFF0000,0xE0CCDEEC,0x2A94E111,0x3FBACB12
        long            0x3FFF0000,0xE33F8972,0xBE8A5A51,0x3FBB9BFE
        long            0x3FFF0000,0xE5B906E7,0x7C8348A8,0x3FBCF2F4
        long            0x3FFF0000,0xE8396A50,0x3C4BDC68,0x3FBEF22F
        long            0x3FFF0000,0xEAC0C6E7,0xDD24392F,0xBFBDBF4A
        long            0x3FFF0000,0xED4F301E,0xD9942B84,0x3FBEC01A
        long            0x3FFF0000,0xEFE4B99B,0xDCDAF5CB,0x3FBE8CAC
        long            0x3FFF0000,0xF281773C,0x59FFB13A,0xBFBCBB3F
        long            0x3FFF0000,0xF5257D15,0x2486CC2C,0x3FBEF73A
        long            0x3FFF0000,0xF7D0DF73,0x0AD13BB9,0xBFB8B795
        long            0x3FFF0000,0xFA83B2DB,0x722A033A,0x3FBEF84B
        long            0x3FFF0000,0xFD3E0C0C,0xF486C175,0xBFBEF581

        set             INT,L_SCR1

        set             X,FP_SCR0
        set             XDCARE,X+2
        set             XFRAC,X+4

        set             ADJFACT,FP_SCR0

        set             FACT1,FP_SCR0
        set             FACT1HI,FACT1+4
        set             FACT1LOW,FACT1+8

        set             FACT2,FP_SCR1
        set             FACT2HI,FACT2+4
        set             FACT2LOW,FACT2+8

        global          stwotox
#--ENTRY POINT FOR 2**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
stwotox:
        fmovm.x         (%a0),&0x80             # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        fmov.x          %fp0,X(%a6)
        and.l           &0x7FFFFFFF,%d1

        cmp.l           %d1,&0x3FB98000         # |X| >= 2**(-70)?
        bge.b           TWOOK1
        bra.w           EXPBORS

TWOOK1:
        cmp.l           %d1,&0x400D80C0         # |X| > 16480?
        ble.b           TWOMAIN
        bra.w           EXPBORS

TWOMAIN:
#--USUAL CASE, 2^(-70) <= |X| <= 16480

        fmov.x          %fp0,%fp1
        fmul.s          &0x42800000,%fp1        # 64 * X
        fmov.l          %fp1,INT(%a6)           # N = ROUND-TO-INT(64 X)
        mov.l           %d2,-(%sp)
        lea             TEXPTBL(%pc),%a1        # LOAD ADDRESS OF TABLE OF 2^(J/64)
        fmov.l          INT(%a6),%fp1           # N --> FLOATING FMT
        mov.l           INT(%a6),%d1
        mov.l           %d1,%d2
        and.l           &0x3F,%d1               # D0 IS J
        asl.l           &4,%d1                  # DISPLACEMENT FOR 2^(J/64)
        add.l           %d1,%a1                 # ADDRESS FOR 2^(J/64)
        asr.l           &6,%d2                  # d2 IS L, N = 64L + J
        mov.l           %d2,%d1
        asr.l           &1,%d1                  # D0 IS M
        sub.l           %d1,%d2                 # d2 IS M', N = 64(M+M') + J
        add.l           &0x3FFF,%d2

#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
#--ADJFACT = 2^(M').
#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.

        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmul.s          &0x3C800000,%fp1        # (1/64)*N
        mov.l           (%a1)+,FACT1(%a6)
        mov.l           (%a1)+,FACT1HI(%a6)
        mov.l           (%a1)+,FACT1LOW(%a6)
        mov.w           (%a1)+,FACT2(%a6)

        fsub.x          %fp1,%fp0               # X - (1/64)*INT(64 X)

        mov.w           (%a1)+,FACT2HI(%a6)
        clr.w           FACT2HI+2(%a6)
        clr.l           FACT2LOW(%a6)
        add.w           %d1,FACT1(%a6)
        fmul.x          LOG2(%pc),%fp0          # FP0 IS R
        add.w           %d1,FACT2(%a6)

        bra.w           expr

EXPBORS:
#--FPCR, D0 SAVED
        cmp.l           %d1,&0x3FFF8000
        bgt.b           TEXPBIG

#--|X| IS SMALL, RETURN 1 + X

        fmov.l          %d0,%fpcr               # restore users round prec,mode
        fadd.s          &0x3F800000,%fp0        # RETURN 1 + X
        bra             t_pinx2

TEXPBIG:
#--|X| IS LARGE, GENERATE OVERFLOW IF X > 0; ELSE GENERATE UNDERFLOW
#--REGISTERS SAVE SO FAR ARE FPCR AND  D0
        mov.l           X(%a6),%d1
        cmp.l           %d1,&0
        blt.b           EXPNEG

        bra             t_ovfl2                 # t_ovfl expects positive value

EXPNEG:
        bra             t_unfl2                 # t_unfl expects positive value

        global          stwotoxd
stwotoxd:
#--ENTRY POINT FOR 2**(X) FOR DENORMALIZED ARGUMENT

        fmov.l          %d0,%fpcr               # set user's rounding mode/precision
        fmov.s          &0x3F800000,%fp0        # RETURN 1 + X
        mov.l           (%a0),%d1
        or.l            &0x00800001,%d1
        fadd.s          %d1,%fp0
        bra             t_pinx2

        global          stentox
#--ENTRY POINT FOR 10**(X), HERE X IS FINITE, NON-ZERO, AND NOT NAN'S
stentox:
        fmovm.x         (%a0),&0x80             # LOAD INPUT

        mov.l           (%a0),%d1
        mov.w           4(%a0),%d1
        fmov.x          %fp0,X(%a6)
        and.l           &0x7FFFFFFF,%d1

        cmp.l           %d1,&0x3FB98000         # |X| >= 2**(-70)?
        bge.b           TENOK1
        bra.w           EXPBORS

TENOK1:
        cmp.l           %d1,&0x400B9B07         # |X| <= 16480*log2/log10 ?
        ble.b           TENMAIN
        bra.w           EXPBORS

TENMAIN:
#--USUAL CASE, 2^(-70) <= |X| <= 16480 LOG 2 / LOG 10

        fmov.x          %fp0,%fp1
        fmul.d          L2TEN64(%pc),%fp1       # X*64*LOG10/LOG2
        fmov.l          %fp1,INT(%a6)           # N=INT(X*64*LOG10/LOG2)
        mov.l           %d2,-(%sp)
        lea             TEXPTBL(%pc),%a1        # LOAD ADDRESS OF TABLE OF 2^(J/64)
        fmov.l          INT(%a6),%fp1           # N --> FLOATING FMT
        mov.l           INT(%a6),%d1
        mov.l           %d1,%d2
        and.l           &0x3F,%d1               # D0 IS J
        asl.l           &4,%d1                  # DISPLACEMENT FOR 2^(J/64)
        add.l           %d1,%a1                 # ADDRESS FOR 2^(J/64)
        asr.l           &6,%d2                  # d2 IS L, N = 64L + J
        mov.l           %d2,%d1
        asr.l           &1,%d1                  # D0 IS M
        sub.l           %d1,%d2                 # d2 IS M', N = 64(M+M') + J
        add.l           &0x3FFF,%d2

#--SUMMARY: a1 IS ADDRESS FOR THE LEADING PORTION OF 2^(J/64),
#--D0 IS M WHERE N = 64(M+M') + J. NOTE THAT |M| <= 16140 BY DESIGN.
#--ADJFACT = 2^(M').
#--REGISTERS SAVED SO FAR ARE (IN ORDER) FPCR, D0, FP1, a1, AND FP2.
        fmovm.x         &0x0c,-(%sp)            # save fp2/fp3

        fmov.x          %fp1,%fp2

        fmul.d          L10TWO1(%pc),%fp1       # N*(LOG2/64LOG10)_LEAD
        mov.l           (%a1)+,FACT1(%a6)

        fmul.x          L10TWO2(%pc),%fp2       # N*(LOG2/64LOG10)_TRAIL

        mov.l           (%a1)+,FACT1HI(%a6)
        mov.l           (%a1)+,FACT1LOW(%a6)
        fsub.x          %fp1,%fp0               # X - N L_LEAD
        mov.w           (%a1)+,FACT2(%a6)

        fsub.x          %fp2,%fp0               # X - N L_TRAIL

        mov.w           (%a1)+,FACT2HI(%a6)
        clr.w           FACT2HI+2(%a6)
        clr.l           FACT2LOW(%a6)

        fmul.x          LOG10(%pc),%fp0         # FP0 IS R
        add.w           %d1,FACT1(%a6)
        add.w           %d1,FACT2(%a6)

expr:
#--FPCR, FP2, FP3 ARE SAVED IN ORDER AS SHOWN.
#--ADJFACT CONTAINS 2**(M'), FACT1 + FACT2 = 2**(M) * 2**(J/64).
#--FP0 IS R. THE FOLLOWING CODE COMPUTES
#--     2**(M'+M) * 2**(J/64) * EXP(R)

        fmov.x          %fp0,%fp1
        fmul.x          %fp1,%fp1               # FP1 IS S = R*R

        fmov.d          EXPA5(%pc),%fp2         # FP2 IS A5
        fmov.d          EXPA4(%pc),%fp3         # FP3 IS A4

        fmul.x          %fp1,%fp2               # FP2 IS S*A5
        fmul.x          %fp1,%fp3               # FP3 IS S*A4

        fadd.d          EXPA3(%pc),%fp2         # FP2 IS A3+S*A5
        fadd.d          EXPA2(%pc),%fp3         # FP3 IS A2+S*A4

        fmul.x          %fp1,%fp2               # FP2 IS S*(A3+S*A5)
        fmul.x          %fp1,%fp3               # FP3 IS S*(A2+S*A4)

        fadd.d          EXPA1(%pc),%fp2         # FP2 IS A1+S*(A3+S*A5)
        fmul.x          %fp0,%fp3               # FP3 IS R*S*(A2+S*A4)

        fmul.x          %fp1,%fp2               # FP2 IS S*(A1+S*(A3+S*A5))
        fadd.x          %fp3,%fp0               # FP0 IS R+R*S*(A2+S*A4)
        fadd.x          %fp2,%fp0               # FP0 IS EXP(R) - 1

        fmovm.x         (%sp)+,&0x30            # restore fp2/fp3

#--FINAL RECONSTRUCTION PROCESS
#--EXP(X) = 2^M*2^(J/64) + 2^M*2^(J/64)*(EXP(R)-1)  -  (1 OR 0)

        fmul.x          FACT1(%a6),%fp0
        fadd.x          FACT2(%a6),%fp0
        fadd.x          FACT1(%a6),%fp0

        fmov.l          %d0,%fpcr               # restore users round prec,mode
        mov.w           %d2,ADJFACT(%a6)        # INSERT EXPONENT
        mov.l           (%sp)+,%d2
        mov.l           &0x80000000,ADJFACT+4(%a6)
        clr.l           ADJFACT+8(%a6)
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          ADJFACT(%a6),%fp0       # FINAL ADJUSTMENT
        bra             t_catch

        global          stentoxd
stentoxd:
#--ENTRY POINT FOR 10**(X) FOR DENORMALIZED ARGUMENT

        fmov.l          %d0,%fpcr               # set user's rounding mode/precision
        fmov.s          &0x3F800000,%fp0        # RETURN 1 + X
        mov.l           (%a0),%d1
        or.l            &0x00800001,%d1
        fadd.s          %d1,%fp0
        bra             t_pinx2

#########################################################################
# smovcr(): returns the ROM constant at the offset specified in d1      #
#           rounded to the mode and precision specified in d0.          #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = rnd prec,mode                                              #
#       d1 = ROM offset                                                 #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = the ROM constant rounded to the user's rounding mode,prec #
#                                                                       #
#########################################################################

        global          smovcr
smovcr:
        mov.l           %d1,-(%sp)              # save rom offset for a sec

        lsr.b           &0x4,%d0                # shift ctrl bits to lo
        mov.l           %d0,%d1                 # make a copy
        andi.w          &0x3,%d1                # extract rnd mode
        andi.w          &0xc,%d0                # extract rnd prec
        swap            %d0                     # put rnd prec in hi
        mov.w           %d1,%d0                 # put rnd mode in lo

        mov.l           (%sp)+,%d1              # get rom offset

#
# check range of offset
#
        tst.b           %d1                     # if zero, offset is to pi
        beq.b           pi_tbl                  # it is pi
        cmpi.b          %d1,&0x0a               # check range $01 - $0a
        ble.b           z_val                   # if in this range, return zero
        cmpi.b          %d1,&0x0e               # check range $0b - $0e
        ble.b           sm_tbl                  # valid constants in this range
        cmpi.b          %d1,&0x2f               # check range $10 - $2f
        ble.b           z_val                   # if in this range, return zero
        cmpi.b          %d1,&0x3f               # check range $30 - $3f
        ble.b           bg_tbl                  # valid constants in this range

z_val:
        bra.l           ld_pzero                # return a zero

#
# the answer is PI rounded to the proper precision.
#
# fetch a pointer to the answer table relating to the proper rounding
# precision.
#
pi_tbl:
        tst.b           %d0                     # is rmode RN?
        bne.b           pi_not_rn               # no
pi_rn:
        lea.l           PIRN(%pc),%a0           # yes; load PI RN table addr
        bra.w           set_finx
pi_not_rn:
        cmpi.b          %d0,&rp_mode            # is rmode RP?
        beq.b           pi_rp                   # yes
pi_rzrm:
        lea.l           PIRZRM(%pc),%a0         # no; load PI RZ,RM table addr
        bra.b           set_finx
pi_rp:
        lea.l           PIRP(%pc),%a0           # load PI RP table addr
        bra.b           set_finx

#
# the answer is one of:
#       $0B     log10(2)        (inexact)
#       $0C     e               (inexact)
#       $0D     log2(e)         (inexact)
#       $0E     log10(e)        (exact)
#
# fetch a pointer to the answer table relating to the proper rounding
# precision.
#
sm_tbl:
        subi.b          &0xb,%d1                # make offset in 0-4 range
        tst.b           %d0                     # is rmode RN?
        bne.b           sm_not_rn               # no
sm_rn:
        lea.l           SMALRN(%pc),%a0         # yes; load RN table addr
sm_tbl_cont:
        cmpi.b          %d1,&0x2                # is result log10(e)?
        ble.b           set_finx                # no; answer is inexact
        bra.b           no_finx                 # yes; answer is exact
sm_not_rn:
        cmpi.b          %d0,&rp_mode            # is rmode RP?
        beq.b           sm_rp                   # yes
sm_rzrm:
        lea.l           SMALRZRM(%pc),%a0       # no; load RZ,RM table addr
        bra.b           sm_tbl_cont
sm_rp:
        lea.l           SMALRP(%pc),%a0         # load RP table addr
        bra.b           sm_tbl_cont

#
# the answer is one of:
#       $30     ln(2)           (inexact)
#       $31     ln(10)          (inexact)
#       $32     10^0            (exact)
#       $33     10^1            (exact)
#       $34     10^2            (exact)
#       $35     10^4            (exact)
#       $36     10^8            (exact)
#       $37     10^16           (exact)
#       $38     10^32           (inexact)
#       $39     10^64           (inexact)
#       $3A     10^128          (inexact)
#       $3B     10^256          (inexact)
#       $3C     10^512          (inexact)
#       $3D     10^1024         (inexact)
#       $3E     10^2048         (inexact)
#       $3F     10^4096         (inexact)
#
# fetch a pointer to the answer table relating to the proper rounding
# precision.
#
bg_tbl:
        subi.b          &0x30,%d1               # make offset in 0-f range
        tst.b           %d0                     # is rmode RN?
        bne.b           bg_not_rn               # no
bg_rn:
        lea.l           BIGRN(%pc),%a0          # yes; load RN table addr
bg_tbl_cont:
        cmpi.b          %d1,&0x1                # is offset <= $31?
        ble.b           set_finx                # yes; answer is inexact
        cmpi.b          %d1,&0x7                # is $32 <= offset <= $37?
        ble.b           no_finx                 # yes; answer is exact
        bra.b           set_finx                # no; answer is inexact
bg_not_rn:
        cmpi.b          %d0,&rp_mode            # is rmode RP?
        beq.b           bg_rp                   # yes
bg_rzrm:
        lea.l           BIGRZRM(%pc),%a0        # no; load RZ,RM table addr
        bra.b           bg_tbl_cont
bg_rp:
        lea.l           BIGRP(%pc),%a0          # load RP table addr
        bra.b           bg_tbl_cont

# answer is inexact, so set INEX2 and AINEX in the user's FPSR.
set_finx:
        ori.l           &inx2a_mask,USER_FPSR(%a6) # set INEX2/AINEX
no_finx:
        mulu.w          &0xc,%d1                # offset points into tables
        swap            %d0                     # put rnd prec in lo word
        tst.b           %d0                     # is precision extended?

        bne.b           not_ext                 # if xprec, do not call round

# Precision is extended
        fmovm.x         (%a0,%d1.w),&0x80       # return result in fp0
        rts

# Precision is single or double
not_ext:
        swap            %d0                     # rnd prec in upper word

# call round() to round the answer to the proper precision.
# exponents out of range for single or double DO NOT cause underflow
# or overflow.
        mov.w           0x0(%a0,%d1.w),FP_SCR1_EX(%a6) # load first word
        mov.l           0x4(%a0,%d1.w),FP_SCR1_HI(%a6) # load second word
        mov.l           0x8(%a0,%d1.w),FP_SCR1_LO(%a6) # load third word
        mov.l           %d0,%d1
        clr.l           %d0                     # clear g,r,s
        lea             FP_SCR1(%a6),%a0        # pass ptr to answer
        clr.w           LOCAL_SGN(%a0)          # sign always positive
        bsr.l           _round                  # round the mantissa

        fmovm.x         (%a0),&0x80             # return rounded result in fp0
        rts

        align           0x4

PIRN:   long            0x40000000,0xc90fdaa2,0x2168c235        # pi
PIRZRM: long            0x40000000,0xc90fdaa2,0x2168c234        # pi
PIRP:   long            0x40000000,0xc90fdaa2,0x2168c235        # pi

SMALRN: long            0x3ffd0000,0x9a209a84,0xfbcff798        # log10(2)
        long            0x40000000,0xadf85458,0xa2bb4a9a        # e
        long            0x3fff0000,0xb8aa3b29,0x5c17f0bc        # log2(e)
        long            0x3ffd0000,0xde5bd8a9,0x37287195        # log10(e)
        long            0x00000000,0x00000000,0x00000000        # 0.0

SMALRZRM:
        long            0x3ffd0000,0x9a209a84,0xfbcff798        # log10(2)
        long            0x40000000,0xadf85458,0xa2bb4a9a        # e
        long            0x3fff0000,0xb8aa3b29,0x5c17f0bb        # log2(e)
        long            0x3ffd0000,0xde5bd8a9,0x37287195        # log10(e)
        long            0x00000000,0x00000000,0x00000000        # 0.0

SMALRP: long            0x3ffd0000,0x9a209a84,0xfbcff799        # log10(2)
        long            0x40000000,0xadf85458,0xa2bb4a9b        # e
        long            0x3fff0000,0xb8aa3b29,0x5c17f0bc        # log2(e)
        long            0x3ffd0000,0xde5bd8a9,0x37287195        # log10(e)
        long            0x00000000,0x00000000,0x00000000        # 0.0

BIGRN:  long            0x3ffe0000,0xb17217f7,0xd1cf79ac        # ln(2)
        long            0x40000000,0x935d8ddd,0xaaa8ac17        # ln(10)

        long            0x3fff0000,0x80000000,0x00000000        # 10 ^ 0
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59E        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D5        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CE0        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8E        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C7        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C17        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE5        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979B        # 10 ^ 4096

BIGRZRM:
        long            0x3ffe0000,0xb17217f7,0xd1cf79ab        # ln(2)
        long            0x40000000,0x935d8ddd,0xaaa8ac16        # ln(10)

        long            0x3fff0000,0x80000000,0x00000000        # 10 ^ 0
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59D        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D5        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CDF        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8D        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C6        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C17        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE4        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979A        # 10 ^ 4096

BIGRP:
        long            0x3ffe0000,0xb17217f7,0xd1cf79ac        # ln(2)
        long            0x40000000,0x935d8ddd,0xaaa8ac17        # ln(10)

        long            0x3fff0000,0x80000000,0x00000000        # 10 ^ 0
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59E        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D6        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CE0        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8E        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C7        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C18        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE5        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979B        # 10 ^ 4096

#########################################################################
# sscale(): computes the destination operand scaled by the source       #
#           operand. If the absoulute value of the source operand is    #
#           >= 2^14, an overflow or underflow is returned.              #
#                                                                       #
# INPUT *************************************************************** #
#       a0  = pointer to double-extended source operand X               #
#       a1  = pointer to double-extended destination operand Y          #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 =  scale(X,Y)                                               #
#                                                                       #
#########################################################################

set     SIGN,           L_SCR1

        global          sscale
sscale:
        mov.l           %d0,-(%sp)              # store off ctrl bits for now

        mov.w           DST_EX(%a1),%d1         # get dst exponent
        smi.b           SIGN(%a6)               # use SIGN to hold dst sign
        andi.l          &0x00007fff,%d1         # strip sign from dst exp

        mov.w           SRC_EX(%a0),%d0         # check src bounds
        andi.w          &0x7fff,%d0             # clr src sign bit
        cmpi.w          %d0,&0x3fff             # is src ~ ZERO?
        blt.w           src_small               # yes
        cmpi.w          %d0,&0x400c             # no; is src too big?
        bgt.w           src_out                 # yes

#
# Source is within 2^14 range.
#
src_ok:
        fintrz.x        SRC(%a0),%fp0           # calc int of src
        fmov.l          %fp0,%d0                # int src to d0
# don't want any accrued bits from the fintrz showing up later since
# we may need to read the fpsr for the last fp op in t_catch2().
        fmov.l          &0x0,%fpsr

        tst.b           DST_HI(%a1)             # is dst denormalized?
        bmi.b           sok_norm

# the dst is a DENORM. normalize the DENORM and add the adjustment to
# the src value. then, jump to the norm part of the routine.
sok_dnrm:
        mov.l           %d0,-(%sp)              # save src for now

        mov.w           DST_EX(%a1),FP_SCR0_EX(%a6) # make a copy
        mov.l           DST_HI(%a1),FP_SCR0_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR0_LO(%a6)

        lea             FP_SCR0(%a6),%a0        # pass ptr to DENORM
        bsr.l           norm                    # normalize the DENORM
        neg.l           %d0
        add.l           (%sp)+,%d0              # add adjustment to src

        fmovm.x         FP_SCR0(%a6),&0x80      # load normalized DENORM

        cmpi.w          %d0,&-0x3fff            # is the shft amt really low?
        bge.b           sok_norm2               # thank goodness no

# the multiply factor that we're trying to create should be a denorm
# for the multiply to work. therefore, we're going to actually do a
# multiply with a denorm which will cause an unimplemented data type
# exception to be put into the machine which will be caught and corrected
# later. we don't do this with the DENORMs above because this method
# is slower. but, don't fret, I don't see it being used much either.
        fmov.l          (%sp)+,%fpcr            # restore user fpcr
        mov.l           &0x80000000,%d1         # load normalized mantissa
        subi.l          &-0x3fff,%d0            # how many should we shift?
        neg.l           %d0                     # make it positive
        cmpi.b          %d0,&0x20               # is it > 32?
        bge.b           sok_dnrm_32             # yes
        lsr.l           %d0,%d1                 # no; bit stays in upper lw
        clr.l           -(%sp)                  # insert zero low mantissa
        mov.l           %d1,-(%sp)              # insert new high mantissa
        clr.l           -(%sp)                  # make zero exponent
        bra.b           sok_norm_cont
sok_dnrm_32:
        subi.b          &0x20,%d0               # get shift count
        lsr.l           %d0,%d1                 # make low mantissa longword
        mov.l           %d1,-(%sp)              # insert new low mantissa
        clr.l           -(%sp)                  # insert zero high mantissa
        clr.l           -(%sp)                  # make zero exponent
        bra.b           sok_norm_cont

# the src will force the dst to a DENORM value or worse. so, let's
# create an fp multiply that will create the result.
sok_norm:
        fmovm.x         DST(%a1),&0x80          # load fp0 with normalized src
sok_norm2:
        fmov.l          (%sp)+,%fpcr            # restore user fpcr

        addi.w          &0x3fff,%d0             # turn src amt into exp value
        swap            %d0                     # put exponent in high word
        clr.l           -(%sp)                  # insert new exponent
        mov.l           &0x80000000,-(%sp)      # insert new high mantissa
        mov.l           %d0,-(%sp)              # insert new lo mantissa

sok_norm_cont:
        fmov.l          %fpcr,%d0               # d0 needs fpcr for t_catch2
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          (%sp)+,%fp0             # do the multiply
        bra             t_catch2                # catch any exceptions

#
# Source is outside of 2^14 range.  Test the sign and branch
# to the appropriate exception handler.
#
src_out:
        mov.l           (%sp)+,%d0              # restore ctrl bits
        exg             %a0,%a1                 # swap src,dst ptrs
        tst.b           SRC_EX(%a1)             # is src negative?
        bmi             t_unfl                  # yes; underflow
        bra             t_ovfl_sc               # no; overflow

#
# The source input is below 1, so we check for denormalized numbers
# and set unfl.
#
src_small:
        tst.b           DST_HI(%a1)             # is dst denormalized?
        bpl.b           ssmall_done             # yes

        mov.l           (%sp)+,%d0
        fmov.l          %d0,%fpcr               # no; load control bits
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          DST(%a1),%fp0           # simply return dest
        bra             t_catch2
ssmall_done:
        mov.l           (%sp)+,%d0              # load control bits into d1
        mov.l           %a1,%a0                 # pass ptr to dst
        bra             t_resdnrm

#########################################################################
# smod(): computes the fp MOD of the input values X,Y.                  #
# srem(): computes the fp (IEEE) REM of the input values X,Y.           #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision input X                      #
#       a1 = pointer to extended precision input Y                      #
#       d0 = round precision,mode                                       #
#                                                                       #
#       The input operands X and Y can be either normalized or          #
#       denormalized.                                                   #
#                                                                       #
# OUTPUT ************************************************************** #
#      fp0 = FREM(X,Y) or FMOD(X,Y)                                     #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       Step 1.  Save and strip signs of X and Y: signX := sign(X),     #
#                signY := sign(Y), X := |X|, Y := |Y|,                  #
#                signQ := signX EOR signY. Record whether MOD or REM    #
#                is requested.                                          #
#                                                                       #
#       Step 2.  Set L := expo(X)-expo(Y), k := 0, Q := 0.              #
#                If (L < 0) then                                        #
#                   R := X, go to Step 4.                               #
#                else                                                   #
#                   R := 2^(-L)X, j := L.                               #
#                endif                                                  #
#                                                                       #
#       Step 3.  Perform MOD(X,Y)                                       #
#            3.1 If R = Y, go to Step 9.                                #
#            3.2 If R > Y, then { R := R - Y, Q := Q + 1}               #
#            3.3 If j = 0, go to Step 4.                                #
#            3.4 k := k + 1, j := j - 1, Q := 2Q, R := 2R. Go to        #
#                Step 3.1.                                              #
#                                                                       #
#       Step 4.  At this point, R = X - QY = MOD(X,Y). Set              #
#                Last_Subtract := false (used in Step 7 below). If      #
#                MOD is requested, go to Step 6.                        #
#                                                                       #
#       Step 5.  R = MOD(X,Y), but REM(X,Y) is requested.               #
#            5.1 If R < Y/2, then R = MOD(X,Y) = REM(X,Y). Go to        #
#                Step 6.                                                #
#            5.2 If R > Y/2, then { set Last_Subtract := true,          #
#                Q := Q + 1, Y := signY*Y }. Go to Step 6.              #
#            5.3 This is the tricky case of R = Y/2. If Q is odd,       #
#                then { Q := Q + 1, signX := -signX }.                  #
#                                                                       #
#       Step 6.  R := signX*R.                                          #
#                                                                       #
#       Step 7.  If Last_Subtract = true, R := R - Y.                   #
#                                                                       #
#       Step 8.  Return signQ, last 7 bits of Q, and R as required.     #
#                                                                       #
#       Step 9.  At this point, R = 2^(-j)*X - Q Y = Y. Thus,           #
#                X = 2^(j)*(Q+1)Y. set Q := 2^(j)*(Q+1),                #
#                R := 0. Return signQ, last 7 bits of Q, and R.         #
#                                                                       #
#########################################################################

        set             Mod_Flag,L_SCR3
        set             Sc_Flag,L_SCR3+1

        set             SignY,L_SCR2
        set             SignX,L_SCR2+2
        set             SignQ,L_SCR3+2

        set             Y,FP_SCR0
        set             Y_Hi,Y+4
        set             Y_Lo,Y+8

        set             R,FP_SCR1
        set             R_Hi,R+4
        set             R_Lo,R+8

Scale:
        long            0x00010000,0x80000000,0x00000000,0x00000000

        global          smod
smod:
        clr.b           FPSR_QBYTE(%a6)
        mov.l           %d0,-(%sp)              # save ctrl bits
        clr.b           Mod_Flag(%a6)
        bra.b           Mod_Rem

        global          srem
srem:
        clr.b           FPSR_QBYTE(%a6)
        mov.l           %d0,-(%sp)              # save ctrl bits
        mov.b           &0x1,Mod_Flag(%a6)

Mod_Rem:
#..Save sign of X and Y
        movm.l          &0x3f00,-(%sp)          # save data registers
        mov.w           SRC_EX(%a0),%d3
        mov.w           %d3,SignY(%a6)
        and.l           &0x00007FFF,%d3         # Y := |Y|

#
        mov.l           SRC_HI(%a0),%d4
        mov.l           SRC_LO(%a0),%d5         # (D3,D4,D5) is |Y|

        tst.l           %d3
        bne.b           Y_Normal

        mov.l           &0x00003FFE,%d3         # $3FFD + 1
        tst.l           %d4
        bne.b           HiY_not0

HiY_0:
        mov.l           %d5,%d4
        clr.l           %d5
        sub.l           &32,%d3
        clr.l           %d6
        bfffo           %d4{&0:&32},%d6
        lsl.l           %d6,%d4
        sub.l           %d6,%d3                 # (D3,D4,D5) is normalized
#                                               ...with bias $7FFD
        bra.b           Chk_X

HiY_not0:
        clr.l           %d6
        bfffo           %d4{&0:&32},%d6
        sub.l           %d6,%d3
        lsl.l           %d6,%d4
        mov.l           %d5,%d7                 # a copy of D5
        lsl.l           %d6,%d5
        neg.l           %d6
        add.l           &32,%d6
        lsr.l           %d6,%d7
        or.l            %d7,%d4                 # (D3,D4,D5) normalized
#                                       ...with bias $7FFD
        bra.b           Chk_X

Y_Normal:
        add.l           &0x00003FFE,%d3         # (D3,D4,D5) normalized
#                                       ...with bias $7FFD

Chk_X:
        mov.w           DST_EX(%a1),%d0
        mov.w           %d0,SignX(%a6)
        mov.w           SignY(%a6),%d1
        eor.l           %d0,%d1
        and.l           &0x00008000,%d1
        mov.w           %d1,SignQ(%a6)          # sign(Q) obtained
        and.l           &0x00007FFF,%d0
        mov.l           DST_HI(%a1),%d1
        mov.l           DST_LO(%a1),%d2         # (D0,D1,D2) is |X|
        tst.l           %d0
        bne.b           X_Normal
        mov.l           &0x00003FFE,%d0
        tst.l           %d1
        bne.b           HiX_not0

HiX_0:
        mov.l           %d2,%d1
        clr.l           %d2
        sub.l           &32,%d0
        clr.l           %d6
        bfffo           %d1{&0:&32},%d6
        lsl.l           %d6,%d1
        sub.l           %d6,%d0                 # (D0,D1,D2) is normalized
#                                       ...with bias $7FFD
        bra.b           Init

HiX_not0:
        clr.l           %d6
        bfffo           %d1{&0:&32},%d6
        sub.l           %d6,%d0
        lsl.l           %d6,%d1
        mov.l           %d2,%d7                 # a copy of D2
        lsl.l           %d6,%d2
        neg.l           %d6
        add.l           &32,%d6
        lsr.l           %d6,%d7
        or.l            %d7,%d1                 # (D0,D1,D2) normalized
#                                       ...with bias $7FFD
        bra.b           Init

X_Normal:
        add.l           &0x00003FFE,%d0         # (D0,D1,D2) normalized
#                                       ...with bias $7FFD

Init:
#
        mov.l           %d3,L_SCR1(%a6)         # save biased exp(Y)
        mov.l           %d0,-(%sp)              # save biased exp(X)
        sub.l           %d3,%d0                 # L := expo(X)-expo(Y)

        clr.l           %d6                     # D6 := carry <- 0
        clr.l           %d3                     # D3 is Q
        mov.l           &0,%a1                  # A1 is k; j+k=L, Q=0

#..(Carry,D1,D2) is R
        tst.l           %d0
        bge.b           Mod_Loop_pre

#..expo(X) < expo(Y). Thus X = mod(X,Y)
#
        mov.l           (%sp)+,%d0              # restore d0
        bra.w           Get_Mod

Mod_Loop_pre:
        addq.l          &0x4,%sp                # erase exp(X)
#..At this point  R = 2^(-L)X; Q = 0; k = 0; and  k+j = L
Mod_Loop:
        tst.l           %d6                     # test carry bit
        bgt.b           R_GT_Y

#..At this point carry = 0, R = (D1,D2), Y = (D4,D5)
        cmp.l           %d1,%d4                 # compare hi(R) and hi(Y)
        bne.b           R_NE_Y
        cmp.l           %d2,%d5                 # compare lo(R) and lo(Y)
        bne.b           R_NE_Y

#..At this point, R = Y
        bra.w           Rem_is_0

R_NE_Y:
#..use the borrow of the previous compare
        bcs.b           R_LT_Y                  # borrow is set iff R < Y

R_GT_Y:
#..If Carry is set, then Y < (Carry,D1,D2) < 2Y. Otherwise, Carry = 0
#..and Y < (D1,D2) < 2Y. Either way, perform R - Y
        sub.l           %d5,%d2                 # lo(R) - lo(Y)
        subx.l          %d4,%d1                 # hi(R) - hi(Y)
        clr.l           %d6                     # clear carry
        addq.l          &1,%d3                  # Q := Q + 1

R_LT_Y:
#..At this point, Carry=0, R < Y. R = 2^(k-L)X - QY; k+j = L; j >= 0.
        tst.l           %d0                     # see if j = 0.
        beq.b           PostLoop

        add.l           %d3,%d3                 # Q := 2Q
        add.l           %d2,%d2                 # lo(R) = 2lo(R)
        roxl.l          &1,%d1                  # hi(R) = 2hi(R) + carry
        scs             %d6                     # set Carry if 2(R) overflows
        addq.l          &1,%a1                  # k := k+1
        subq.l          &1,%d0                  # j := j - 1
#..At this point, R=(Carry,D1,D2) = 2^(k-L)X - QY, j+k=L, j >= 0, R < 2Y.

        bra.b           Mod_Loop

PostLoop:
#..k = L, j = 0, Carry = 0, R = (D1,D2) = X - QY, R < Y.

#..normalize R.
        mov.l           L_SCR1(%a6),%d0         # new biased expo of R
        tst.l           %d1
        bne.b           HiR_not0

HiR_0:
        mov.l           %d2,%d1
        clr.l           %d2
        sub.l           &32,%d0
        clr.l           %d6
        bfffo           %d1{&0:&32},%d6
        lsl.l           %d6,%d1
        sub.l           %d6,%d0                 # (D0,D1,D2) is normalized
#                                       ...with bias $7FFD
        bra.b           Get_Mod

HiR_not0:
        clr.l           %d6
        bfffo           %d1{&0:&32},%d6
        bmi.b           Get_Mod                 # already normalized
        sub.l           %d6,%d0
        lsl.l           %d6,%d1
        mov.l           %d2,%d7                 # a copy of D2
        lsl.l           %d6,%d2
        neg.l           %d6
        add.l           &32,%d6
        lsr.l           %d6,%d7
        or.l            %d7,%d1                 # (D0,D1,D2) normalized

#
Get_Mod:
        cmp.l           %d0,&0x000041FE
        bge.b           No_Scale
Do_Scale:
        mov.w           %d0,R(%a6)
        mov.l           %d1,R_Hi(%a6)
        mov.l           %d2,R_Lo(%a6)
        mov.l           L_SCR1(%a6),%d6
        mov.w           %d6,Y(%a6)
        mov.l           %d4,Y_Hi(%a6)
        mov.l           %d5,Y_Lo(%a6)
        fmov.x          R(%a6),%fp0             # no exception
        mov.b           &1,Sc_Flag(%a6)
        bra.b           ModOrRem
No_Scale:
        mov.l           %d1,R_Hi(%a6)
        mov.l           %d2,R_Lo(%a6)
        sub.l           &0x3FFE,%d0
        mov.w           %d0,R(%a6)
        mov.l           L_SCR1(%a6),%d6
        sub.l           &0x3FFE,%d6
        mov.l           %d6,L_SCR1(%a6)
        fmov.x          R(%a6),%fp0
        mov.w           %d6,Y(%a6)
        mov.l           %d4,Y_Hi(%a6)
        mov.l           %d5,Y_Lo(%a6)
        clr.b           Sc_Flag(%a6)

#
ModOrRem:
        tst.b           Mod_Flag(%a6)
        beq.b           Fix_Sign

        mov.l           L_SCR1(%a6),%d6         # new biased expo(Y)
        subq.l          &1,%d6                  # biased expo(Y/2)
        cmp.l           %d0,%d6
        blt.b           Fix_Sign
        bgt.b           Last_Sub

        cmp.l           %d1,%d4
        bne.b           Not_EQ
        cmp.l           %d2,%d5
        bne.b           Not_EQ
        bra.w           Tie_Case

Not_EQ:
        bcs.b           Fix_Sign

Last_Sub:
#
        fsub.x          Y(%a6),%fp0             # no exceptions
        addq.l          &1,%d3                  # Q := Q + 1

#
Fix_Sign:
#..Get sign of X
        mov.w           SignX(%a6),%d6
        bge.b           Get_Q
        fneg.x          %fp0

#..Get Q
#
Get_Q:
        clr.l           %d6
        mov.w           SignQ(%a6),%d6          # D6 is sign(Q)
        mov.l           &8,%d7
        lsr.l           %d7,%d6
        and.l           &0x0000007F,%d3         # 7 bits of Q
        or.l            %d6,%d3                 # sign and bits of Q
#       swap            %d3
#       fmov.l          %fpsr,%d6
#       and.l           &0xFF00FFFF,%d6
#       or.l            %d3,%d6
#       fmov.l          %d6,%fpsr               # put Q in fpsr
        mov.b           %d3,FPSR_QBYTE(%a6)     # put Q in fpsr

#
Restore:
        movm.l          (%sp)+,&0xfc            #  {%d2-%d7}
        mov.l           (%sp)+,%d0
        fmov.l          %d0,%fpcr
        tst.b           Sc_Flag(%a6)
        beq.b           Finish
        mov.b           &FMUL_OP,%d1            # last inst is MUL
        fmul.x          Scale(%pc),%fp0         # may cause underflow
        bra             t_catch2
# the '040 package did this apparently to see if the dst operand for the
# preceding fmul was a denorm. but, it better not have been since the
# algorithm just got done playing with fp0 and expected no exceptions
# as a result. trust me...
#       bra             t_avoid_unsupp          # check for denorm as a
#                                               ;result of the scaling

Finish:
        mov.b           &FMOV_OP,%d1            # last inst is MOVE
        fmov.x          %fp0,%fp0               # capture exceptions & round
        bra             t_catch2

Rem_is_0:
#..R = 2^(-j)X - Q Y = Y, thus R = 0 and quotient = 2^j (Q+1)
        addq.l          &1,%d3
        cmp.l           %d0,&8                  # D0 is j
        bge.b           Q_Big

        lsl.l           %d0,%d3
        bra.b           Set_R_0

Q_Big:
        clr.l           %d3

Set_R_0:
        fmov.s          &0x00000000,%fp0
        clr.b           Sc_Flag(%a6)
        bra.w           Fix_Sign

Tie_Case:
#..Check parity of Q
        mov.l           %d3,%d6
        and.l           &0x00000001,%d6
        tst.l           %d6
        beq.w           Fix_Sign                # Q is even

#..Q is odd, Q := Q + 1, signX := -signX
        addq.l          &1,%d3
        mov.w           SignX(%a6),%d6
        eor.l           &0x00008000,%d6
        mov.w           %d6,SignX(%a6)
        bra.w           Fix_Sign

qnan:   long            0x7fff0000, 0xffffffff, 0xffffffff

#########################################################################
# XDEF **************************************************************** #
#       t_dz(): Handle DZ exception during transcendental emulation.    #
#               Sets N bit according to sign of source operand.         #
#       t_dz2(): Handle DZ exception during transcendental emulation.   #
#                Sets N bit always.                                     #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to source operand                                  #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = default result                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       - Store properly signed INF into fp0.                           #
#       - Set FPSR exception status dz bit, ccode inf bit, and          #
#         accrued dz bit.                                               #
#                                                                       #
#########################################################################

        global          t_dz
t_dz:
        tst.b           SRC_EX(%a0)             # no; is src negative?
        bmi.b           t_dz2                   # yes

dz_pinf:
        fmov.s          &0x7f800000,%fp0        # return +INF in fp0
        ori.l           &dzinf_mask,USER_FPSR(%a6) # set I/DZ/ADZ
        rts

        global          t_dz2
t_dz2:
        fmov.s          &0xff800000,%fp0        # return -INF in fp0
        ori.l           &dzinf_mask+neg_mask,USER_FPSR(%a6) # set N/I/DZ/ADZ
        rts

#################################################################
# OPERR exception:                                              #
#       - set FPSR exception status operr bit, condition code   #
#         nan bit; Store default NAN into fp0                   #
#################################################################
        global          t_operr
t_operr:
        ori.l           &opnan_mask,USER_FPSR(%a6) # set NaN/OPERR/AIOP
        fmovm.x         qnan(%pc),&0x80         # return default NAN in fp0
        rts

#################################################################
# Extended DENORM:                                              #
#       - For all functions that have a denormalized input and  #
#         that f(x)=x, this is the entry point.                 #
#       - we only return the EXOP here if either underflow or   #
#         inexact is enabled.                                   #
#################################################################

# Entry point for scale w/ extended denorm. The function does
# NOT set INEX2/AUNFL/AINEX.
        global          t_resdnrm
t_resdnrm:
        ori.l           &unfl_mask,USER_FPSR(%a6) # set UNFL
        bra.b           xdnrm_con

        global          t_extdnrm
t_extdnrm:
        ori.l           &unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX

xdnrm_con:
        mov.l           %a0,%a1                 # make copy of src ptr
        mov.l           %d0,%d1                 # make copy of rnd prec,mode
        andi.b          &0xc0,%d1               # extended precision?
        bne.b           xdnrm_sd                # no

# result precision is extended.
        tst.b           LOCAL_EX(%a0)           # is denorm negative?
        bpl.b           xdnrm_exit              # no

        bset            &neg_bit,FPSR_CC(%a6)   # yes; set 'N' ccode bit
        bra.b           xdnrm_exit

# result precision is single or double
xdnrm_sd:
        mov.l           %a1,-(%sp)
        tst.b           LOCAL_EX(%a0)           # is denorm pos or neg?
        smi.b           %d1                     # set d0 accodingly
        bsr.l           unf_sub
        mov.l           (%sp)+,%a1
xdnrm_exit:
        fmovm.x         (%a0),&0x80             # return default result in fp0

        mov.b           FPCR_ENABLE(%a6),%d0
        andi.b          &0x0a,%d0               # is UNFL or INEX enabled?
        bne.b           xdnrm_ena               # yes
        rts

################
# unfl enabled #
################
# we have a DENORM that needs to be converted into an EXOP.
# so, normalize the mantissa, add 0x6000 to the new exponent,
# and return the result in fp1.
xdnrm_ena:
        mov.w           LOCAL_EX(%a1),FP_SCR0_EX(%a6)
        mov.l           LOCAL_HI(%a1),FP_SCR0_HI(%a6)
        mov.l           LOCAL_LO(%a1),FP_SCR0_LO(%a6)

        lea             FP_SCR0(%a6),%a0
        bsr.l           norm                    # normalize mantissa
        addi.l          &0x6000,%d0             # add extra bias
        andi.w          &0x8000,FP_SCR0_EX(%a6) # keep old sign
        or.w            %d0,FP_SCR0_EX(%a6)     # insert new exponent

        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

#################################################################
# UNFL exception:                                               #
#       - This routine is for cases where even an EXOP isn't    #
#         large enough to hold the range of this result.        #
#         In such a case, the EXOP equals zero.                 #
#       - Return the default result to the proper precision     #
#         with the sign of this result being the same as that   #
#         of the src operand.                                   #
#       - t_unfl2() is provided to force the result sign to     #
#         positive which is the desired result for fetox().     #
#################################################################
        global          t_unfl
t_unfl:
        ori.l           &unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX

        tst.b           (%a0)                   # is result pos or neg?
        smi.b           %d1                     # set d1 accordingly
        bsr.l           unf_sub                 # calc default unfl result
        fmovm.x         (%a0),&0x80             # return default result in fp0

        fmov.s          &0x00000000,%fp1        # return EXOP in fp1
        rts

# t_unfl2 ALWAYS tells unf_sub to create a positive result
        global          t_unfl2
t_unfl2:
        ori.l           &unfinx_mask,USER_FPSR(%a6) # set UNFL/INEX2/AUNFL/AINEX

        sf.b            %d1                     # set d0 to represent positive
        bsr.l           unf_sub                 # calc default unfl result
        fmovm.x         (%a0),&0x80             # return default result in fp0

        fmov.s          &0x0000000,%fp1         # return EXOP in fp1
        rts

#################################################################
# OVFL exception:                                               #
#       - This routine is for cases where even an EXOP isn't    #
#         large enough to hold the range of this result.        #
#       - Return the default result to the proper precision     #
#         with the sign of this result being the same as that   #
#         of the src operand.                                   #
#       - t_ovfl2() is provided to force the result sign to     #
#         positive which is the desired result for fcosh().     #
#       - t_ovfl_sc() is provided for scale() which only sets   #
#         the inexact bits if the number is inexact for the     #
#         precision indicated.                                  #
#################################################################

        global          t_ovfl_sc
t_ovfl_sc:
        ori.l           &ovfl_inx_mask,USER_FPSR(%a6) # set OVFL/AOVFL/AINEX

        mov.b           %d0,%d1                 # fetch rnd mode/prec
        andi.b          &0xc0,%d1               # extract rnd prec
        beq.b           ovfl_work               # prec is extended

        tst.b           LOCAL_HI(%a0)           # is dst a DENORM?
        bmi.b           ovfl_sc_norm            # no

# dst op is a DENORM. we have to normalize the mantissa to see if the
# result would be inexact for the given precision. make a copy of the
# dst so we don't screw up the version passed to us.
        mov.w           LOCAL_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           LOCAL_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           LOCAL_LO(%a0),FP_SCR0_LO(%a6)
        lea             FP_SCR0(%a6),%a0        # pass ptr to FP_SCR0
        movm.l          &0xc080,-(%sp)          # save d0-d1/a0
        bsr.l           norm                    # normalize mantissa
        movm.l          (%sp)+,&0x0103          # restore d0-d1/a0

ovfl_sc_norm:
        cmpi.b          %d1,&0x40               # is prec dbl?
        bne.b           ovfl_sc_dbl             # no; sgl
ovfl_sc_sgl:
        tst.l           LOCAL_LO(%a0)           # is lo lw of sgl set?
        bne.b           ovfl_sc_inx             # yes
        tst.b           3+LOCAL_HI(%a0)         # is lo byte of hi lw set?
        bne.b           ovfl_sc_inx             # yes
        bra.b           ovfl_work               # don't set INEX2
ovfl_sc_dbl:
        mov.l           LOCAL_LO(%a0),%d1       # are any of lo 11 bits of
        andi.l          &0x7ff,%d1              # dbl mantissa set?
        beq.b           ovfl_work               # no; don't set INEX2
ovfl_sc_inx:
        ori.l           &inex2_mask,USER_FPSR(%a6) # set INEX2
        bra.b           ovfl_work               # continue

        global          t_ovfl
t_ovfl:
        ori.l           &ovfinx_mask,USER_FPSR(%a6) # set OVFL/INEX2/AOVFL/AINEX

ovfl_work:
        tst.b           LOCAL_EX(%a0)           # what is the sign?
        smi.b           %d1                     # set d1 accordingly
        bsr.l           ovf_res                 # calc default ovfl result
        mov.b           %d0,FPSR_CC(%a6)        # insert new ccodes
        fmovm.x         (%a0),&0x80             # return default result in fp0

        fmov.s          &0x00000000,%fp1        # return EXOP in fp1
        rts

# t_ovfl2 ALWAYS tells ovf_res to create a positive result
        global          t_ovfl2
t_ovfl2:
        ori.l           &ovfinx_mask,USER_FPSR(%a6) # set OVFL/INEX2/AOVFL/AINEX

        sf.b            %d1                     # clear sign flag for positive
        bsr.l           ovf_res                 # calc default ovfl result
        mov.b           %d0,FPSR_CC(%a6)        # insert new ccodes
        fmovm.x         (%a0),&0x80             # return default result in fp0

        fmov.s          &0x00000000,%fp1        # return EXOP in fp1
        rts

#################################################################
# t_catch():                                                    #
#       - the last operation of a transcendental emulation      #
#         routine may have caused an underflow or overflow.     #
#         we find out if this occurred by doing an fsave and    #
#         checking the exception bit. if one did occur, then we #
#         jump to fgen_except() which creates the default       #
#         result and EXOP for us.                               #
#################################################################
        global          t_catch
t_catch:

        fsave           -(%sp)
        tst.b           0x2(%sp)
        bmi.b           catch
        add.l           &0xc,%sp

#################################################################
# INEX2 exception:                                              #
#       - The inex2 and ainex bits are set.                     #
#################################################################
        global          t_inx2
t_inx2:
        fblt.w          t_minx2
        fbeq.w          inx2_zero

        global          t_pinx2
t_pinx2:
        ori.w           &inx2a_mask,2+USER_FPSR(%a6) # set INEX2/AINEX
        rts

        global          t_minx2
t_minx2:
        ori.l           &inx2a_mask+neg_mask,USER_FPSR(%a6) # set N/INEX2/AINEX
        rts

inx2_zero:
        mov.b           &z_bmask,FPSR_CC(%a6)
        ori.w           &inx2a_mask,2+USER_FPSR(%a6) # set INEX2/AINEX
        rts

# an underflow or overflow exception occurred.
# we must set INEX/AINEX since the fmul/fdiv/fmov emulation may not!
catch:
        ori.w           &inx2a_mask,FPSR_EXCEPT(%a6)
catch2:
        bsr.l           fgen_except
        add.l           &0xc,%sp
        rts

        global          t_catch2
t_catch2:

        fsave           -(%sp)

        tst.b           0x2(%sp)
        bmi.b           catch2
        add.l           &0xc,%sp

        fmov.l          %fpsr,%d0
        or.l            %d0,USER_FPSR(%a6)

        rts

#########################################################################

#########################################################################
# unf_res(): underflow default result calculation for transcendentals   #
#                                                                       #
# INPUT:                                                                #
#       d0   : rnd mode,precision                                       #
#       d1.b : sign bit of result ('11111111 = (-) ; '00000000 = (+))   #
# OUTPUT:                                                               #
#       a0   : points to result (in instruction memory)                 #
#########################################################################
unf_sub:
        ori.l           &unfinx_mask,USER_FPSR(%a6)

        andi.w          &0x10,%d1               # keep sign bit in 4th spot

        lsr.b           &0x4,%d0                # shift rnd prec,mode to lo bits
        andi.b          &0xf,%d0                # strip hi rnd mode bit
        or.b            %d1,%d0                 # concat {sgn,mode,prec}

        mov.l           %d0,%d1                 # make a copy
        lsl.b           &0x1,%d1                # mult index 2 by 2

        mov.b           (tbl_unf_cc.b,%pc,%d0.w*1),FPSR_CC(%a6) # insert ccode bits
        lea             (tbl_unf_result.b,%pc,%d1.w*8),%a0 # grab result ptr
        rts

tbl_unf_cc:
        byte            0x4, 0x4, 0x4, 0x0
        byte            0x4, 0x4, 0x4, 0x0
        byte            0x4, 0x4, 0x4, 0x0
        byte            0x0, 0x0, 0x0, 0x0
        byte            0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4
        byte            0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4
        byte            0x8+0x4, 0x8+0x4, 0x8, 0x8+0x4

tbl_unf_result:
        long            0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
        long            0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
        long            0x00000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
        long            0x00000000, 0x00000000, 0x00000001, 0x0 # MIN; ext

        long            0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
        long            0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
        long            0x3f810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
        long            0x3f810000, 0x00000100, 0x00000000, 0x0 # MIN; sgl

        long            0x3c010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
        long            0x3c010000, 0x00000000, 0x00000000, 0x0 # ZER0;dbl
        long            0x3c010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
        long            0x3c010000, 0x00000000, 0x00000800, 0x0 # MIN; dbl

        long            0x0,0x0,0x0,0x0
        long            0x0,0x0,0x0,0x0
        long            0x0,0x0,0x0,0x0
        long            0x0,0x0,0x0,0x0

        long            0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
        long            0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext
        long            0x80000000, 0x00000000, 0x00000001, 0x0 # MIN; ext
        long            0x80000000, 0x00000000, 0x00000000, 0x0 # ZERO;ext

        long            0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
        long            0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl
        long            0xbf810000, 0x00000100, 0x00000000, 0x0 # MIN; sgl
        long            0xbf810000, 0x00000000, 0x00000000, 0x0 # ZERO;sgl

        long            0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
        long            0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl
        long            0xbc010000, 0x00000000, 0x00000800, 0x0 # MIN; dbl
        long            0xbc010000, 0x00000000, 0x00000000, 0x0 # ZERO;dbl

############################################################

#########################################################################
# src_zero(): Return signed zero according to sign of src operand.      #
#########################################################################
        global          src_zero
src_zero:
        tst.b           SRC_EX(%a0)             # get sign of src operand
        bmi.b           ld_mzero                # if neg, load neg zero

#
# ld_pzero(): return a positive zero.
#
        global          ld_pzero
ld_pzero:
        fmov.s          &0x00000000,%fp0        # load +0
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'Z' ccode bit
        rts

# ld_mzero(): return a negative zero.
        global          ld_mzero
ld_mzero:
        fmov.s          &0x80000000,%fp0        # load -0
        mov.b           &neg_bmask+z_bmask,FPSR_CC(%a6) # set 'N','Z' ccode bits
        rts

#########################################################################
# dst_zero(): Return signed zero according to sign of dst operand.      #
#########################################################################
        global          dst_zero
dst_zero:
        tst.b           DST_EX(%a1)             # get sign of dst operand
        bmi.b           ld_mzero                # if neg, load neg zero
        bra.b           ld_pzero                # load positive zero

#########################################################################
# src_inf(): Return signed inf according to sign of src operand.        #
#########################################################################
        global          src_inf
src_inf:
        tst.b           SRC_EX(%a0)             # get sign of src operand
        bmi.b           ld_minf                 # if negative branch

#
# ld_pinf(): return a positive infinity.
#
        global          ld_pinf
ld_pinf:
        fmov.s          &0x7f800000,%fp0        # load +INF
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'INF' ccode bit
        rts

#
# ld_minf():return a negative infinity.
#
        global          ld_minf
ld_minf:
        fmov.s          &0xff800000,%fp0        # load -INF
        mov.b           &neg_bmask+inf_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
        rts

#########################################################################
# dst_inf(): Return signed inf according to sign of dst operand.        #
#########################################################################
        global          dst_inf
dst_inf:
        tst.b           DST_EX(%a1)             # get sign of dst operand
        bmi.b           ld_minf                 # if negative branch
        bra.b           ld_pinf

        global          szr_inf
#################################################################
# szr_inf(): Return +ZERO for a negative src operand or         #
#                   +INF for a positive src operand.            #
#            Routine used for fetox, ftwotox, and ftentox.      #
#################################################################
szr_inf:
        tst.b           SRC_EX(%a0)             # check sign of source
        bmi.b           ld_pzero
        bra.b           ld_pinf

#########################################################################
# sopr_inf(): Return +INF for a positive src operand or                 #
#             jump to operand error routine for a negative src operand. #
#             Routine used for flogn, flognp1, flog10, and flog2.       #
#########################################################################
        global          sopr_inf
sopr_inf:
        tst.b           SRC_EX(%a0)             # check sign of source
        bmi.w           t_operr
        bra.b           ld_pinf

#################################################################
# setoxm1i(): Return minus one for a negative src operand or    #
#             positive infinity for a positive src operand.     #
#             Routine used for fetoxm1.                         #
#################################################################
        global          setoxm1i
setoxm1i:
        tst.b           SRC_EX(%a0)             # check sign of source
        bmi.b           ld_mone
        bra.b           ld_pinf

#########################################################################
# src_one(): Return signed one according to sign of src operand.        #
#########################################################################
        global          src_one
src_one:
        tst.b           SRC_EX(%a0)             # check sign of source
        bmi.b           ld_mone

#
# ld_pone(): return positive one.
#
        global          ld_pone
ld_pone:
        fmov.s          &0x3f800000,%fp0        # load +1
        clr.b           FPSR_CC(%a6)
        rts

#
# ld_mone(): return negative one.
#
        global          ld_mone
ld_mone:
        fmov.s          &0xbf800000,%fp0        # load -1
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

ppiby2: long            0x3fff0000, 0xc90fdaa2, 0x2168c235
mpiby2: long            0xbfff0000, 0xc90fdaa2, 0x2168c235

#################################################################
# spi_2(): Return signed PI/2 according to sign of src operand. #
#################################################################
        global          spi_2
spi_2:
        tst.b           SRC_EX(%a0)             # check sign of source
        bmi.b           ld_mpi2

#
# ld_ppi2(): return positive PI/2.
#
        global          ld_ppi2
ld_ppi2:
        fmov.l          %d0,%fpcr
        fmov.x          ppiby2(%pc),%fp0        # load +pi/2
        bra.w           t_pinx2                 # set INEX2

#
# ld_mpi2(): return negative PI/2.
#
        global          ld_mpi2
ld_mpi2:
        fmov.l          %d0,%fpcr
        fmov.x          mpiby2(%pc),%fp0        # load -pi/2
        bra.w           t_minx2                 # set INEX2

####################################################
# The following routines give support for fsincos. #
####################################################

#
# ssincosz(): When the src operand is ZERO, store a one in the
#             cosine register and return a ZERO in fp0 w/ the same sign
#             as the src operand.
#
        global          ssincosz
ssincosz:
        fmov.s          &0x3f800000,%fp1
        tst.b           SRC_EX(%a0)             # test sign
        bpl.b           sincoszp
        fmov.s          &0x80000000,%fp0        # return sin result in fp0
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6)
        bra.b           sto_cos                 # store cosine result
sincoszp:
        fmov.s          &0x00000000,%fp0        # return sin result in fp0
        mov.b           &z_bmask,FPSR_CC(%a6)
        bra.b           sto_cos                 # store cosine result

#
# ssincosi(): When the src operand is INF, store a QNAN in the cosine
#             register and jump to the operand error routine for negative
#             src operands.
#
        global          ssincosi
ssincosi:
        fmov.x          qnan(%pc),%fp1          # load NAN
        bsr.l           sto_cos                 # store cosine result
        bra.w           t_operr

#
# ssincosqnan(): When the src operand is a QNAN, store the QNAN in the cosine
#                register and branch to the src QNAN routine.
#
        global          ssincosqnan
ssincosqnan:
        fmov.x          LOCAL_EX(%a0),%fp1
        bsr.l           sto_cos
        bra.w           src_qnan

#
# ssincossnan(): When the src operand is an SNAN, store the SNAN w/ the SNAN bit set
#                in the cosine register and branch to the src SNAN routine.
#
        global          ssincossnan
ssincossnan:
        fmov.x          LOCAL_EX(%a0),%fp1
        bsr.l           sto_cos
        bra.w           src_snan

########################################################################

#########################################################################
# sto_cos(): store fp1 to the fpreg designated by the CMDREG dst field. #
#            fp1 holds the result of the cosine portion of ssincos().   #
#            the value in fp1 will not take any exceptions when moved.  #
# INPUT:                                                                #
#       fp1 : fp value to store                                         #
# MODIFIED:                                                             #
#       d0                                                              #
#########################################################################
        global          sto_cos
sto_cos:
        mov.b           1+EXC_CMDREG(%a6),%d0
        andi.w          &0x7,%d0
        mov.w           (tbl_sto_cos.b,%pc,%d0.w*2),%d0
        jmp             (tbl_sto_cos.b,%pc,%d0.w*1)

tbl_sto_cos:
        short           sto_cos_0 - tbl_sto_cos
        short           sto_cos_1 - tbl_sto_cos
        short           sto_cos_2 - tbl_sto_cos
        short           sto_cos_3 - tbl_sto_cos
        short           sto_cos_4 - tbl_sto_cos
        short           sto_cos_5 - tbl_sto_cos
        short           sto_cos_6 - tbl_sto_cos
        short           sto_cos_7 - tbl_sto_cos

sto_cos_0:
        fmovm.x         &0x40,EXC_FP0(%a6)
        rts
sto_cos_1:
        fmovm.x         &0x40,EXC_FP1(%a6)
        rts
sto_cos_2:
        fmov.x          %fp1,%fp2
        rts
sto_cos_3:
        fmov.x          %fp1,%fp3
        rts
sto_cos_4:
        fmov.x          %fp1,%fp4
        rts
sto_cos_5:
        fmov.x          %fp1,%fp5
        rts
sto_cos_6:
        fmov.x          %fp1,%fp6
        rts
sto_cos_7:
        fmov.x          %fp1,%fp7
        rts

##################################################################
        global          smod_sdnrm
        global          smod_snorm
smod_sdnrm:
smod_snorm:
        mov.b           DTAG(%a6),%d1
        beq.l           smod
        cmpi.b          %d1,&ZERO
        beq.w           smod_zro
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           smod
        cmpi.b          %d1,&SNAN
        beq.l           dst_snan
        bra.l           dst_qnan

        global          smod_szero
smod_szero:
        mov.b           DTAG(%a6),%d1
        beq.l           t_operr
        cmpi.b          %d1,&ZERO
        beq.l           t_operr
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           t_operr
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

        global          smod_sinf
smod_sinf:
        mov.b           DTAG(%a6),%d1
        beq.l           smod_fpn
        cmpi.b          %d1,&ZERO
        beq.l           smod_zro
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           smod_fpn
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

smod_zro:
srem_zro:
        mov.b           SRC_EX(%a0),%d1         # get src sign
        mov.b           DST_EX(%a1),%d0         # get dst sign
        eor.b           %d0,%d1                 # get qbyte sign
        andi.b          &0x80,%d1
        mov.b           %d1,FPSR_QBYTE(%a6)
        tst.b           %d0
        bpl.w           ld_pzero
        bra.w           ld_mzero

smod_fpn:
srem_fpn:
        clr.b           FPSR_QBYTE(%a6)
        mov.l           %d0,-(%sp)
        mov.b           SRC_EX(%a0),%d1         # get src sign
        mov.b           DST_EX(%a1),%d0         # get dst sign
        eor.b           %d0,%d1                 # get qbyte sign
        andi.b          &0x80,%d1
        mov.b           %d1,FPSR_QBYTE(%a6)
        cmpi.b          DTAG(%a6),&DENORM
        bne.b           smod_nrm
        lea             DST(%a1),%a0
        mov.l           (%sp)+,%d0
        bra             t_resdnrm
smod_nrm:
        fmov.l          (%sp)+,%fpcr
        fmov.x          DST(%a1),%fp0
        tst.b           DST_EX(%a1)
        bmi.b           smod_nrm_neg
        rts

smod_nrm_neg:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode
        rts

#########################################################################
        global          srem_snorm
        global          srem_sdnrm
srem_sdnrm:
srem_snorm:
        mov.b           DTAG(%a6),%d1
        beq.l           srem
        cmpi.b          %d1,&ZERO
        beq.w           srem_zro
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           srem
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

        global          srem_szero
srem_szero:
        mov.b           DTAG(%a6),%d1
        beq.l           t_operr
        cmpi.b          %d1,&ZERO
        beq.l           t_operr
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           t_operr
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

        global          srem_sinf
srem_sinf:
        mov.b           DTAG(%a6),%d1
        beq.w           srem_fpn
        cmpi.b          %d1,&ZERO
        beq.w           srem_zro
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           srem_fpn
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

#########################################################################
        global          sscale_snorm
        global          sscale_sdnrm
sscale_snorm:
sscale_sdnrm:
        mov.b           DTAG(%a6),%d1
        beq.l           sscale
        cmpi.b          %d1,&ZERO
        beq.l           dst_zero
        cmpi.b          %d1,&INF
        beq.l           dst_inf
        cmpi.b          %d1,&DENORM
        beq.l           sscale
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

        global          sscale_szero
sscale_szero:
        mov.b           DTAG(%a6),%d1
        beq.l           sscale
        cmpi.b          %d1,&ZERO
        beq.l           dst_zero
        cmpi.b          %d1,&INF
        beq.l           dst_inf
        cmpi.b          %d1,&DENORM
        beq.l           sscale
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        bra.l           dst_snan

        global          sscale_sinf
sscale_sinf:
        mov.b           DTAG(%a6),%d1
        beq.l           t_operr
        cmpi.b          %d1,&QNAN
        beq.l           dst_qnan
        cmpi.b          %d1,&SNAN
        beq.l           dst_snan
        bra.l           t_operr

########################################################################

#
# sop_sqnan(): The src op for frem/fmod/fscale was a QNAN.
#
        global          sop_sqnan
sop_sqnan:
        mov.b           DTAG(%a6),%d1
        cmpi.b          %d1,&QNAN
        beq.b           dst_qnan
        cmpi.b          %d1,&SNAN
        beq.b           dst_snan
        bra.b           src_qnan

#
# sop_ssnan(): The src op for frem/fmod/fscale was an SNAN.
#
        global          sop_ssnan
sop_ssnan:
        mov.b           DTAG(%a6),%d1
        cmpi.b          %d1,&QNAN
        beq.b           dst_qnan_src_snan
        cmpi.b          %d1,&SNAN
        beq.b           dst_snan
        bra.b           src_snan

dst_qnan_src_snan:
        ori.l           &snaniop_mask,USER_FPSR(%a6) # set NAN/SNAN/AIOP
        bra.b           dst_qnan

#
# dst_qnan(): Return the dst SNAN w/ the SNAN bit set.
#
        global          dst_snan
dst_snan:
        fmov.x          DST(%a1),%fp0           # the fmove sets the SNAN bit
        fmov.l          %fpsr,%d0               # catch resulting status
        or.l            %d0,USER_FPSR(%a6)      # store status
        rts

#
# dst_qnan(): Return the dst QNAN.
#
        global          dst_qnan
dst_qnan:
        fmov.x          DST(%a1),%fp0           # return the non-signalling nan
        tst.b           DST_EX(%a1)             # set ccodes according to QNAN sign
        bmi.b           dst_qnan_m
dst_qnan_p:
        mov.b           &nan_bmask,FPSR_CC(%a6)
        rts
dst_qnan_m:
        mov.b           &neg_bmask+nan_bmask,FPSR_CC(%a6)
        rts

#
# src_snan(): Return the src SNAN w/ the SNAN bit set.
#
        global          src_snan
src_snan:
        fmov.x          SRC(%a0),%fp0           # the fmove sets the SNAN bit
        fmov.l          %fpsr,%d0               # catch resulting status
        or.l            %d0,USER_FPSR(%a6)      # store status
        rts

#
# src_qnan(): Return the src QNAN.
#
        global          src_qnan
src_qnan:
        fmov.x          SRC(%a0),%fp0           # return the non-signalling nan
        tst.b           SRC_EX(%a0)             # set ccodes according to QNAN sign
        bmi.b           dst_qnan_m
src_qnan_p:
        mov.b           &nan_bmask,FPSR_CC(%a6)
        rts
src_qnan_m:
        mov.b           &neg_bmask+nan_bmask,FPSR_CC(%a6)
        rts

#
# fkern2.s:
#       These entry points are used by the exception handler
# routines where an instruction is selected by an index into
# a large jump table corresponding to a given instruction which
# has been decoded. Flow continues here where we now decode
# further accoding to the source operand type.
#

        global          fsinh
fsinh:
        mov.b           STAG(%a6),%d1
        beq.l           ssinh
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           src_inf
        cmpi.b          %d1,&DENORM
        beq.l           ssinhd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          flognp1
flognp1:
        mov.b           STAG(%a6),%d1
        beq.l           slognp1
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           sopr_inf
        cmpi.b          %d1,&DENORM
        beq.l           slognp1d
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fetoxm1
fetoxm1:
        mov.b           STAG(%a6),%d1
        beq.l           setoxm1
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           setoxm1i
        cmpi.b          %d1,&DENORM
        beq.l           setoxm1d
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          ftanh
ftanh:
        mov.b           STAG(%a6),%d1
        beq.l           stanh
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           src_one
        cmpi.b          %d1,&DENORM
        beq.l           stanhd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fatan
fatan:
        mov.b           STAG(%a6),%d1
        beq.l           satan
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           spi_2
        cmpi.b          %d1,&DENORM
        beq.l           satand
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fasin
fasin:
        mov.b           STAG(%a6),%d1
        beq.l           sasin
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           sasind
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fatanh
fatanh:
        mov.b           STAG(%a6),%d1
        beq.l           satanh
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           satanhd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fsine
fsine:
        mov.b           STAG(%a6),%d1
        beq.l           ssin
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           ssind
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          ftan
ftan:
        mov.b           STAG(%a6),%d1
        beq.l           stan
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           stand
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fetox
fetox:
        mov.b           STAG(%a6),%d1
        beq.l           setox
        cmpi.b          %d1,&ZERO
        beq.l           ld_pone
        cmpi.b          %d1,&INF
        beq.l           szr_inf
        cmpi.b          %d1,&DENORM
        beq.l           setoxd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          ftwotox
ftwotox:
        mov.b           STAG(%a6),%d1
        beq.l           stwotox
        cmpi.b          %d1,&ZERO
        beq.l           ld_pone
        cmpi.b          %d1,&INF
        beq.l           szr_inf
        cmpi.b          %d1,&DENORM
        beq.l           stwotoxd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          ftentox
ftentox:
        mov.b           STAG(%a6),%d1
        beq.l           stentox
        cmpi.b          %d1,&ZERO
        beq.l           ld_pone
        cmpi.b          %d1,&INF
        beq.l           szr_inf
        cmpi.b          %d1,&DENORM
        beq.l           stentoxd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          flogn
flogn:
        mov.b           STAG(%a6),%d1
        beq.l           slogn
        cmpi.b          %d1,&ZERO
        beq.l           t_dz2
        cmpi.b          %d1,&INF
        beq.l           sopr_inf
        cmpi.b          %d1,&DENORM
        beq.l           slognd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          flog10
flog10:
        mov.b           STAG(%a6),%d1
        beq.l           slog10
        cmpi.b          %d1,&ZERO
        beq.l           t_dz2
        cmpi.b          %d1,&INF
        beq.l           sopr_inf
        cmpi.b          %d1,&DENORM
        beq.l           slog10d
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          flog2
flog2:
        mov.b           STAG(%a6),%d1
        beq.l           slog2
        cmpi.b          %d1,&ZERO
        beq.l           t_dz2
        cmpi.b          %d1,&INF
        beq.l           sopr_inf
        cmpi.b          %d1,&DENORM
        beq.l           slog2d
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fcosh
fcosh:
        mov.b           STAG(%a6),%d1
        beq.l           scosh
        cmpi.b          %d1,&ZERO
        beq.l           ld_pone
        cmpi.b          %d1,&INF
        beq.l           ld_pinf
        cmpi.b          %d1,&DENORM
        beq.l           scoshd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          facos
facos:
        mov.b           STAG(%a6),%d1
        beq.l           sacos
        cmpi.b          %d1,&ZERO
        beq.l           ld_ppi2
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           sacosd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fcos
fcos:
        mov.b           STAG(%a6),%d1
        beq.l           scos
        cmpi.b          %d1,&ZERO
        beq.l           ld_pone
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           scosd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fgetexp
fgetexp:
        mov.b           STAG(%a6),%d1
        beq.l           sgetexp
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           sgetexpd
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fgetman
fgetman:
        mov.b           STAG(%a6),%d1
        beq.l           sgetman
        cmpi.b          %d1,&ZERO
        beq.l           src_zero
        cmpi.b          %d1,&INF
        beq.l           t_operr
        cmpi.b          %d1,&DENORM
        beq.l           sgetmand
        cmpi.b          %d1,&QNAN
        beq.l           src_qnan
        bra.l           src_snan

        global          fsincos
fsincos:
        mov.b           STAG(%a6),%d1
        beq.l           ssincos
        cmpi.b          %d1,&ZERO
        beq.l           ssincosz
        cmpi.b          %d1,&INF
        beq.l           ssincosi
        cmpi.b          %d1,&DENORM
        beq.l           ssincosd
        cmpi.b          %d1,&QNAN
        beq.l           ssincosqnan
        bra.l           ssincossnan

        global          fmod
fmod:
        mov.b           STAG(%a6),%d1
        beq.l           smod_snorm
        cmpi.b          %d1,&ZERO
        beq.l           smod_szero
        cmpi.b          %d1,&INF
        beq.l           smod_sinf
        cmpi.b          %d1,&DENORM
        beq.l           smod_sdnrm
        cmpi.b          %d1,&QNAN
        beq.l           sop_sqnan
        bra.l           sop_ssnan

        global          frem
frem:
        mov.b           STAG(%a6),%d1
        beq.l           srem_snorm
        cmpi.b          %d1,&ZERO
        beq.l           srem_szero
        cmpi.b          %d1,&INF
        beq.l           srem_sinf
        cmpi.b          %d1,&DENORM
        beq.l           srem_sdnrm
        cmpi.b          %d1,&QNAN
        beq.l           sop_sqnan
        bra.l           sop_ssnan

        global          fscale
fscale:
        mov.b           STAG(%a6),%d1
        beq.l           sscale_snorm
        cmpi.b          %d1,&ZERO
        beq.l           sscale_szero
        cmpi.b          %d1,&INF
        beq.l           sscale_sinf
        cmpi.b          %d1,&DENORM
        beq.l           sscale_sdnrm
        cmpi.b          %d1,&QNAN
        beq.l           sop_sqnan
        bra.l           sop_ssnan

#########################################################################
# XDEF **************************************************************** #
#       fgen_except(): catch an exception during transcendental         #
#                      emulation                                        #
#                                                                       #
# XREF **************************************************************** #
#       fmul() - emulate a multiply instruction                         #
#       fadd() - emulate an add instruction                             #
#       fin() - emulate an fmove instruction                            #
#                                                                       #
# INPUT *************************************************************** #
#       fp0 = destination operand                                       #
#       d0  = type of instruction that took exception                   #
#       fsave frame = source operand                                    #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP                                                      #
#                                                                       #
# ALGORITHM *********************************************************** #
#       An exception occurred on the last instruction of the            #
# transcendental emulation. hopefully, this won't be happening much     #
# because it will be VERY slow.                                         #
#       The only exceptions capable of passing through here are         #
# Overflow, Underflow, and Unsupported Data Type.                       #
#                                                                       #
#########################################################################

        global          fgen_except
fgen_except:
        cmpi.b          0x3(%sp),&0x7           # is exception UNSUPP?
        beq.b           fge_unsupp              # yes

        mov.b           &NORM,STAG(%a6)

fge_cont:
        mov.b           &NORM,DTAG(%a6)

# ok, I have a problem with putting the dst op at FP_DST. the emulation
# routines aren't supposed to alter the operands but we've just squashed
# FP_DST here...

# 8/17/93 - this turns out to be more of a "cleanliness" standpoint
# then a potential bug. to begin with, only the dyadic functions
# frem,fmod, and fscale would get the dst trashed here. But, for
# the 060SP, the FP_DST is never used again anyways.
        fmovm.x         &0x80,FP_DST(%a6)       # dst op is in fp0

        lea             0x4(%sp),%a0            # pass: ptr to src op
        lea             FP_DST(%a6),%a1         # pass: ptr to dst op

        cmpi.b          %d1,&FMOV_OP
        beq.b           fge_fin                 # it was an "fmov"
        cmpi.b          %d1,&FADD_OP
        beq.b           fge_fadd                # it was an "fadd"
fge_fmul:
        bsr.l           fmul
        rts
fge_fadd:
        bsr.l           fadd
        rts
fge_fin:
        bsr.l           fin
        rts

fge_unsupp:
        mov.b           &DENORM,STAG(%a6)
        bra.b           fge_cont

#
# This table holds the offsets of the emulation routines for each individual
# math operation relative to the address of this table. Included are
# routines like fadd/fmul/fabs as well as the transcendentals.
# The location within the table is determined by the extension bits of the
# operation longword.
#

        swbeg           &109
tbl_unsupp:
        long            fin             - tbl_unsupp    # 00: fmove
        long            fint            - tbl_unsupp    # 01: fint
        long            fsinh           - tbl_unsupp    # 02: fsinh
        long            fintrz          - tbl_unsupp    # 03: fintrz
        long            fsqrt           - tbl_unsupp    # 04: fsqrt
        long            tbl_unsupp      - tbl_unsupp
        long            flognp1         - tbl_unsupp    # 06: flognp1
        long            tbl_unsupp      - tbl_unsupp
        long            fetoxm1         - tbl_unsupp    # 08: fetoxm1
        long            ftanh           - tbl_unsupp    # 09: ftanh
        long            fatan           - tbl_unsupp    # 0a: fatan
        long            tbl_unsupp      - tbl_unsupp
        long            fasin           - tbl_unsupp    # 0c: fasin
        long            fatanh          - tbl_unsupp    # 0d: fatanh
        long            fsine           - tbl_unsupp    # 0e: fsin
        long            ftan            - tbl_unsupp    # 0f: ftan
        long            fetox           - tbl_unsupp    # 10: fetox
        long            ftwotox         - tbl_unsupp    # 11: ftwotox
        long            ftentox         - tbl_unsupp    # 12: ftentox
        long            tbl_unsupp      - tbl_unsupp
        long            flogn           - tbl_unsupp    # 14: flogn
        long            flog10          - tbl_unsupp    # 15: flog10
        long            flog2           - tbl_unsupp    # 16: flog2
        long            tbl_unsupp      - tbl_unsupp
        long            fabs            - tbl_unsupp    # 18: fabs
        long            fcosh           - tbl_unsupp    # 19: fcosh
        long            fneg            - tbl_unsupp    # 1a: fneg
        long            tbl_unsupp      - tbl_unsupp
        long            facos           - tbl_unsupp    # 1c: facos
        long            fcos            - tbl_unsupp    # 1d: fcos
        long            fgetexp         - tbl_unsupp    # 1e: fgetexp
        long            fgetman         - tbl_unsupp    # 1f: fgetman
        long            fdiv            - tbl_unsupp    # 20: fdiv
        long            fmod            - tbl_unsupp    # 21: fmod
        long            fadd            - tbl_unsupp    # 22: fadd
        long            fmul            - tbl_unsupp    # 23: fmul
        long            fsgldiv         - tbl_unsupp    # 24: fsgldiv
        long            frem            - tbl_unsupp    # 25: frem
        long            fscale          - tbl_unsupp    # 26: fscale
        long            fsglmul         - tbl_unsupp    # 27: fsglmul
        long            fsub            - tbl_unsupp    # 28: fsub
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            fsincos         - tbl_unsupp    # 30: fsincos
        long            fsincos         - tbl_unsupp    # 31: fsincos
        long            fsincos         - tbl_unsupp    # 32: fsincos
        long            fsincos         - tbl_unsupp    # 33: fsincos
        long            fsincos         - tbl_unsupp    # 34: fsincos
        long            fsincos         - tbl_unsupp    # 35: fsincos
        long            fsincos         - tbl_unsupp    # 36: fsincos
        long            fsincos         - tbl_unsupp    # 37: fsincos
        long            fcmp            - tbl_unsupp    # 38: fcmp
        long            tbl_unsupp      - tbl_unsupp
        long            ftst            - tbl_unsupp    # 3a: ftst
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            fsin            - tbl_unsupp    # 40: fsmove
        long            fssqrt          - tbl_unsupp    # 41: fssqrt
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            fdin            - tbl_unsupp    # 44: fdmove
        long            fdsqrt          - tbl_unsupp    # 45: fdsqrt
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            fsabs           - tbl_unsupp    # 58: fsabs
        long            tbl_unsupp      - tbl_unsupp
        long            fsneg           - tbl_unsupp    # 5a: fsneg
        long            tbl_unsupp      - tbl_unsupp
        long            fdabs           - tbl_unsupp    # 5c: fdabs
        long            tbl_unsupp      - tbl_unsupp
        long            fdneg           - tbl_unsupp    # 5e: fdneg
        long            tbl_unsupp      - tbl_unsupp
        long            fsdiv           - tbl_unsupp    # 60: fsdiv
        long            tbl_unsupp      - tbl_unsupp
        long            fsadd           - tbl_unsupp    # 62: fsadd
        long            fsmul           - tbl_unsupp    # 63: fsmul
        long            fddiv           - tbl_unsupp    # 64: fddiv
        long            tbl_unsupp      - tbl_unsupp
        long            fdadd           - tbl_unsupp    # 66: fdadd
        long            fdmul           - tbl_unsupp    # 67: fdmul
        long            fssub           - tbl_unsupp    # 68: fssub
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            tbl_unsupp      - tbl_unsupp
        long            fdsub           - tbl_unsupp    # 6c: fdsub

#########################################################################
# XDEF **************************************************************** #
#       fmul(): emulates the fmul instruction                           #
#       fsmul(): emulates the fsmul instruction                         #
#       fdmul(): emulates the fdmul instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       scale_to_zero_src() - scale src exponent to zero                #
#       scale_to_zero_dst() - scale dst exponent to zero                #
#       unf_res() - return default underflow result                     #
#       ovf_res() - return default overflow result                      #
#       res_qnan() - return QNAN result                                 #
#       res_snan() - return SNAN result                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#       d0  rnd prec,mode                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms/denorms into ext/sgl/dbl precision.                             #
#       For norms/denorms, scale the exponents such that a multiply     #
# instruction won't cause an exception. Use the regular fmul to         #
# compute a result. Check if the regular operands would have taken      #
# an exception. If so, return the default overflow/underflow result     #
# and return the EXOP if exceptions are enabled. Else, scale the        #
# result operand to the proper exponent.                                #
#                                                                       #
#########################################################################

        align           0x10
tbl_fmul_ovfl:
        long            0x3fff - 0x7ffe         # ext_max
        long            0x3fff - 0x407e         # sgl_max
        long            0x3fff - 0x43fe         # dbl_max
tbl_fmul_unfl:
        long            0x3fff + 0x0001         # ext_unfl
        long            0x3fff - 0x3f80         # sgl_unfl
        long            0x3fff - 0x3c00         # dbl_unfl

        global          fsmul
fsmul:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl prec
        bra.b           fmul

        global          fdmul
fdmul:
        andi.b          &0x30,%d0
        ori.b           &d_mode*0x10,%d0        # insert dbl prec

        global          fmul
fmul:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1           # combine src tags
        bne.w           fmul_not_norm           # optimize on non-norm input

fmul_norm:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_to_zero_src       # scale src exponent
        mov.l           %d0,-(%sp)              # save scale factor 1

        bsr.l           scale_to_zero_dst       # scale dst exponent

        add.l           %d0,(%sp)               # SCALE_FACTOR = scale1 + scale2

        mov.w           2+L_SCR3(%a6),%d1       # fetch precision
        lsr.b           &0x6,%d1                # shift to lo bits
        mov.l           (%sp)+,%d0              # load S.F.
        cmp.l           %d0,(tbl_fmul_ovfl.w,%pc,%d1.w*4) # would result ovfl?
        beq.w           fmul_may_ovfl           # result may rnd to overflow
        blt.w           fmul_ovfl               # result will overflow

        cmp.l           %d0,(tbl_fmul_unfl.w,%pc,%d1.w*4) # would result unfl?
        beq.w           fmul_may_unfl           # result may rnd to no unfl
        bgt.w           fmul_unfl               # result will underflow

#
# NORMAL:
# - the result of the multiply operation will neither overflow nor underflow.
# - do the multiply to the proper precision and rounding mode.
# - scale the result exponent using the scale factor. if both operands were
# normalized then we really don't need to go through this scaling. but for now,
# this will do.
#
fmul_normal:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fmul_normal_exit:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # load {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# OVERFLOW:
# - the result of the multiply operation is an overflow.
# - do the multiply to the proper precision and rounding mode in order to
# set the inexact bits.
# - calculate the default result and return it in fp0.
# - if overflow or inexact is enabled, we need a multiply result rounded to
# extended precision. if the original operation was extended, then we have this
# result. if the original operation was single or double, we have to do another
# multiply using extended precision and the correct rounding mode. the result
# of this operation then has its exponent scaled by -0x6000 to create the
# exceptional operand.
#
fmul_ovfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

# save setting this until now because this is where fmul_may_ovfl may jump in
fmul_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fmul_ovfl_ena           # yes

# calculate the default result
fmul_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass rnd prec,mode
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

#
# OVFL is enabled; Create EXOP:
# - if precision is extended, then we have the EXOP. simply bias the exponent
# with an extra -0x6000. if the precision is single or double, we need to
# calculate a result rounded to extended precision.
#
fmul_ovfl_ena:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # test the rnd prec
        bne.b           fmul_ovfl_ena_sd        # it's sgl or dbl

fmul_ovfl_ena_cont:
        fmovm.x         &0x80,FP_SCR0(%a6)      # move result to stack

        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.w           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1             # clear sign bit
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fmul_ovfl_dis

fmul_ovfl_ena_sd:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # keep rnd mode only
        fmov.l          %d1,%fpcr               # set FPCR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          &0x0,%fpcr              # clear FPCR
        bra.b           fmul_ovfl_ena_cont

#
# may OVERFLOW:
# - the result of the multiply operation MAY overflow.
# - do the multiply to the proper precision and rounding mode in order to
# set the inexact bits.
# - calculate the default result and return it in fp0.
#
fmul_may_ovfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| >= 2.b?
        fbge.w          fmul_ovfl_tst           # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fmul_normal_exit

#
# UNDERFLOW:
# - the result of the multiply operation is an underflow.
# - do the multiply to the proper precision and rounding mode in order to
# set the inexact bits.
# - calculate the default result and return it in fp0.
# - if overflow or inexact is enabled, we need a multiply result rounded to
# extended precision. if the original operation was extended, then we have this
# result. if the original operation was single or double, we have to do another
# multiply using extended precision and the correct rounding mode. the result
# of this operation then has its exponent scaled by -0x6000 to create the
# exceptional operand.
#
fmul_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

# for fun, let's use only extended precision, round to zero. then, let
# the unf_res() routine figure out all the rest.
# will we get the correct answer.
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fmul_unfl_ena           # yes

fmul_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # unf_res2 may have set 'Z'
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# UNFL is enabled.
#
fmul_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fmul_unfl_ena_sd        # no, sgl or dbl

# if the rnd mode is anything but RZ, then we have to re-do the above
# multiplication becuase we used RZ for all.
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

fmul_unfl_ena_cont:
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp1       # execute multiply

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # save result to stack
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        addi.l          &0x6000,%d1             # add bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.w           fmul_unfl_dis

fmul_unfl_ena_sd:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # use only rnd mode
        fmov.l          %d1,%fpcr               # set FPCR

        bra.b           fmul_unfl_ena_cont

# MAY UNDERFLOW:
# -use the correct rounding mode and precision. this code favors operations
# that do not underflow.
fmul_may_unfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp0       # execute multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| > 2.b?
        fbgt.w          fmul_normal_exit        # no; no underflow occurred
        fblt.w          fmul_unfl               # yes; underflow occurred

#
# we still don't know if underflow occurred. result is ~ equal to 2. but,
# we don't know if the result was an underflow that rounded up to a 2 or
# a normalized number that rounded down to a 2. so, redo the entire operation
# using RZ as the rounding mode to see what the pre-rounded result is.
# this case should be relatively rare.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst operand

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # keep rnd prec
        ori.b           &rz_mode*0x10,%d1       # insert RZ

        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmul.x          FP_SCR0(%a6),%fp1       # execute multiply

        fmov.l          &0x0,%fpcr              # clear FPCR
        fabs.x          %fp1                    # make absolute value
        fcmp.b          %fp1,&0x2               # is |result| < 2.b?
        fbge.w          fmul_normal_exit        # no; no underflow occurred
        bra.w           fmul_unfl               # yes, underflow occurred

################################################################################

#
# Multiply: inputs are not both normalized; what are they?
#
fmul_not_norm:
        mov.w           (tbl_fmul_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fmul_op.b,%pc,%d1.w)

        swbeg           &48
tbl_fmul_op:
        short           fmul_norm       - tbl_fmul_op # NORM x NORM
        short           fmul_zero       - tbl_fmul_op # NORM x ZERO
        short           fmul_inf_src    - tbl_fmul_op # NORM x INF
        short           fmul_res_qnan   - tbl_fmul_op # NORM x QNAN
        short           fmul_norm       - tbl_fmul_op # NORM x DENORM
        short           fmul_res_snan   - tbl_fmul_op # NORM x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

        short           fmul_zero       - tbl_fmul_op # ZERO x NORM
        short           fmul_zero       - tbl_fmul_op # ZERO x ZERO
        short           fmul_res_operr  - tbl_fmul_op # ZERO x INF
        short           fmul_res_qnan   - tbl_fmul_op # ZERO x QNAN
        short           fmul_zero       - tbl_fmul_op # ZERO x DENORM
        short           fmul_res_snan   - tbl_fmul_op # ZERO x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

        short           fmul_inf_dst    - tbl_fmul_op # INF x NORM
        short           fmul_res_operr  - tbl_fmul_op # INF x ZERO
        short           fmul_inf_dst    - tbl_fmul_op # INF x INF
        short           fmul_res_qnan   - tbl_fmul_op # INF x QNAN
        short           fmul_inf_dst    - tbl_fmul_op # INF x DENORM
        short           fmul_res_snan   - tbl_fmul_op # INF x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

        short           fmul_res_qnan   - tbl_fmul_op # QNAN x NORM
        short           fmul_res_qnan   - tbl_fmul_op # QNAN x ZERO
        short           fmul_res_qnan   - tbl_fmul_op # QNAN x INF
        short           fmul_res_qnan   - tbl_fmul_op # QNAN x QNAN
        short           fmul_res_qnan   - tbl_fmul_op # QNAN x DENORM
        short           fmul_res_snan   - tbl_fmul_op # QNAN x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

        short           fmul_norm       - tbl_fmul_op # NORM x NORM
        short           fmul_zero       - tbl_fmul_op # NORM x ZERO
        short           fmul_inf_src    - tbl_fmul_op # NORM x INF
        short           fmul_res_qnan   - tbl_fmul_op # NORM x QNAN
        short           fmul_norm       - tbl_fmul_op # NORM x DENORM
        short           fmul_res_snan   - tbl_fmul_op # NORM x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

        short           fmul_res_snan   - tbl_fmul_op # SNAN x NORM
        short           fmul_res_snan   - tbl_fmul_op # SNAN x ZERO
        short           fmul_res_snan   - tbl_fmul_op # SNAN x INF
        short           fmul_res_snan   - tbl_fmul_op # SNAN x QNAN
        short           fmul_res_snan   - tbl_fmul_op # SNAN x DENORM
        short           fmul_res_snan   - tbl_fmul_op # SNAN x SNAN
        short           tbl_fmul_op     - tbl_fmul_op #
        short           tbl_fmul_op     - tbl_fmul_op #

fmul_res_operr:
        bra.l           res_operr
fmul_res_snan:
        bra.l           res_snan
fmul_res_qnan:
        bra.l           res_qnan

#
# Multiply: (Zero x Zero) || (Zero x norm) || (Zero x denorm)
#
        global          fmul_zero               # global for fsglmul
fmul_zero:
        mov.b           SRC_EX(%a0),%d0         # exclusive or the signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bpl.b           fmul_zero_p             # result ZERO is pos.
fmul_zero_n:
        fmov.s          &0x80000000,%fp0        # load -ZERO
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N
        rts
fmul_zero_p:
        fmov.s          &0x00000000,%fp0        # load +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

#
# Multiply: (inf x inf) || (inf x norm) || (inf x denorm)
#
# Note: The j-bit for an infinity is a don't-care. However, to be
# strictly compatible w/ the 68881/882, we make sure to return an
# INF w/ the j-bit set if the input INF j-bit was set. Destination
# INFs take priority.
#
        global          fmul_inf_dst            # global for fsglmul
fmul_inf_dst:
        fmovm.x         DST(%a1),&0x80          # return INF result in fp0
        mov.b           SRC_EX(%a0),%d0         # exclusive or the signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bpl.b           fmul_inf_dst_p          # result INF is pos.
fmul_inf_dst_n:
        fabs.x          %fp0                    # clear result sign
        fneg.x          %fp0                    # set result sign
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
        rts
fmul_inf_dst_p:
        fabs.x          %fp0                    # clear result sign
        mov.b           &inf_bmask,FPSR_CC(%a6) # set INF
        rts

        global          fmul_inf_src            # global for fsglmul
fmul_inf_src:
        fmovm.x         SRC(%a0),&0x80          # return INF result in fp0
        mov.b           SRC_EX(%a0),%d0         # exclusive or the signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bpl.b           fmul_inf_dst_p          # result INF is pos.
        bra.b           fmul_inf_dst_n

#########################################################################
# XDEF **************************************************************** #
#       fin(): emulates the fmove instruction                           #
#       fsin(): emulates the fsmove instruction                         #
#       fdin(): emulates the fdmove instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize mantissa for EXOP on denorm                  #
#       scale_to_zero_src() - scale src exponent to zero                #
#       ovf_res() - return default overflow result                      #
#       unf_res() - return default underflow result                     #
#       res_qnan_1op() - return QNAN result                             #
#       res_snan_1op() - return SNAN result                             #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = round prec/mode                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms into extended, single, and double precision.                    #
#       Norms can be emulated w/ a regular fmove instruction. For       #
# sgl/dbl, must scale exponent and perform an "fmove". Check to see     #
# if the result would have overflowed/underflowed. If so, use unf_res() #
# or ovf_res() to return the default result. Also return EXOP if        #
# exception is enabled. If no exception, return the default result.     #
#       Unnorms don't pass through here.                                #
#                                                                       #
#########################################################################

        global          fsin
fsin:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl precision
        bra.b           fin

        global          fdin
fdin:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl precision

        global          fin
fin:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        mov.b           STAG(%a6),%d1           # fetch src optype tag
        bne.w           fin_not_norm            # optimize on non-norm input

#
# FP MOVE IN: NORMs and DENORMs ONLY!
#
fin_norm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.w           fin_not_ext             # no, so go handle dbl or sgl

#
# precision selected is extended. so...we cannot get an underflow
# or overflow because of rounding to the correct precision. so...
# skip the scaling and unscaling...
#
        tst.b           SRC_EX(%a0)             # is the operand negative?
        bpl.b           fin_norm_done           # no
        bset            &neg_bit,FPSR_CC(%a6)   # yes, so set 'N' ccode bit
fin_norm_done:
        fmovm.x         SRC(%a0),&0x80          # return result in fp0
        rts

#
# for an extended precision DENORM, the UNFL exception bit is set
# the accrued bit is NOT set in this instance(no inexactness!)
#
fin_denorm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.w           fin_not_ext             # no, so go handle dbl or sgl

        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit
        tst.b           SRC_EX(%a0)             # is the operand negative?
        bpl.b           fin_denorm_done         # no
        bset            &neg_bit,FPSR_CC(%a6)   # yes, so set 'N' ccode bit
fin_denorm_done:
        fmovm.x         SRC(%a0),&0x80          # return result in fp0
        btst            &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
        bne.b           fin_denorm_unfl_ena     # yes
        rts

#
# the input is an extended DENORM and underflow is enabled in the FPCR.
# normalize the mantissa and add the bias of 0x6000 to the resulting negative
# exponent and insert back into the operand.
#
fin_denorm_unfl_ena:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        bsr.l           norm                    # normalize result
        neg.w           %d0                     # new exponent = -(shft val)
        addi.w          &0x6000,%d0             # add new bias to exponent
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch old sign,exp
        andi.w          &0x8000,%d1             # keep old sign
        andi.w          &0x7fff,%d0             # clear sign position
        or.w            %d1,%d0                 # concat new exo,old sign
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

#
# operand is to be rounded to single or double precision
#
fin_not_ext:
        cmpi.b          %d0,&s_mode*0x10        # separate sgl/dbl prec
        bne.b           fin_dbl

#
# operand is to be rounded to single precision
#
fin_sgl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3f80      # will move in underflow?
        bge.w           fin_sd_unfl             # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x407e      # will move in overflow?
        beq.w           fin_sd_may_ovfl         # maybe; go check
        blt.w           fin_sd_ovfl             # yes; go handle overflow

#
# operand will NOT overflow or underflow when moved into the fp reg file
#
fin_sd_normal:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fmov.x          FP_SCR0(%a6),%fp0       # perform move

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fin_sd_normal_exit:
        mov.l           %d2,-(%sp)              # save d2
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.w           FP_SCR0_EX(%a6),%d1     # load {sgn,exp}
        mov.w           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d1,%d2                 # concat old sign,new exponent
        mov.w           %d2,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# operand is to be rounded to double precision
#
fin_dbl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3c00      # will move in underflow?
        bge.w           fin_sd_unfl             # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x43fe      # will move in overflow?
        beq.w           fin_sd_may_ovfl         # maybe; go check
        blt.w           fin_sd_ovfl             # yes; go handle overflow
        bra.w           fin_sd_normal           # no; ho handle normalized op

#
# operand WILL underflow when moved in to the fp register file
#
fin_sd_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        tst.b           FP_SCR0_EX(%a6)         # is operand negative?
        bpl.b           fin_sd_unfl_tst
        bset            &neg_bit,FPSR_CC(%a6)   # set 'N' ccode bit

# if underflow or inexact is enabled, then go calculate the EXOP first.
fin_sd_unfl_tst:
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fin_sd_unfl_ena         # yes

fin_sd_unfl_dis:
        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # unf_res may have set 'Z'
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# operand will underflow AND underflow or inexact is enabled.
# therefore, we must return the result rounded to extended precision.
#
fin_sd_unfl_ena:
        mov.l           FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
        mov.l           FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
        mov.w           FP_SCR0_EX(%a6),%d1     # load current exponent

        mov.l           %d2,-(%sp)              # save d2
        mov.w           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # subtract scale factor
        andi.w          &0x8000,%d2             # extract old sign
        addi.l          &0x6000,%d1             # add new bias
        andi.w          &0x7fff,%d1
        or.w            %d1,%d2                 # concat old sign,new exp
        mov.w           %d2,FP_SCR1_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR1(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fin_sd_unfl_dis

#
# operand WILL overflow.
#
fin_sd_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fmov.x          FP_SCR0(%a6),%fp0       # perform move

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save FPSR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fin_sd_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fin_sd_ovfl_ena         # yes

#
# OVFL is not enabled; therefore, we must create the default result by
# calling ovf_res().
#
fin_sd_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass: prec,mode
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

#
# OVFL is enabled.
# the INEX2 bit has already been updated by the round to the correct precision.
# now, round to extended(and don't alter the FPSR).
#
fin_sd_ovfl_ena:
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        sub.l           &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fin_sd_ovfl_dis

#
# the move in MAY overflow. so...
#
fin_sd_may_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fmov.x          FP_SCR0(%a6),%fp0       # perform the move

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| >= 2.b?
        fbge.w          fin_sd_ovfl_tst         # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fin_sd_normal_exit

##########################################################################

#
# operand is not a NORM: check its optype and branch accordingly
#
fin_not_norm:
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.w           fin_denorm
        cmpi.b          %d1,&SNAN               # weed out SNANs
        beq.l           res_snan_1op
        cmpi.b          %d1,&QNAN               # weed out QNANs
        beq.l           res_qnan_1op

#
# do the fmove in; at this point, only possible ops are ZERO and INF.
# use fmov to determine ccodes.
# prec:mode should be zero at this point but it won't affect answer anyways.
#
        fmov.x          SRC(%a0),%fp0           # do fmove in
        fmov.l          %fpsr,%d0               # no exceptions possible
        rol.l           &0x8,%d0                # put ccodes in lo byte
        mov.b           %d0,FPSR_CC(%a6)        # insert correct ccodes
        rts

#########################################################################
# XDEF **************************************************************** #
#       fdiv(): emulates the fdiv instruction                           #
#       fsdiv(): emulates the fsdiv instruction                         #
#       fddiv(): emulates the fddiv instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       scale_to_zero_src() - scale src exponent to zero                #
#       scale_to_zero_dst() - scale dst exponent to zero                #
#       unf_res() - return default underflow result                     #
#       ovf_res() - return default overflow result                      #
#       res_qnan() - return QNAN result                                 #
#       res_snan() - return SNAN result                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#       d0  rnd prec,mode                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms/denorms into ext/sgl/dbl precision.                             #
#       For norms/denorms, scale the exponents such that a divide       #
# instruction won't cause an exception. Use the regular fdiv to         #
# compute a result. Check if the regular operands would have taken      #
# an exception. If so, return the default overflow/underflow result     #
# and return the EXOP if exceptions are enabled. Else, scale the        #
# result operand to the proper exponent.                                #
#                                                                       #
#########################################################################

        align           0x10
tbl_fdiv_unfl:
        long            0x3fff - 0x0000         # ext_unfl
        long            0x3fff - 0x3f81         # sgl_unfl
        long            0x3fff - 0x3c01         # dbl_unfl

tbl_fdiv_ovfl:
        long            0x3fff - 0x7ffe         # ext overflow exponent
        long            0x3fff - 0x407e         # sgl overflow exponent
        long            0x3fff - 0x43fe         # dbl overflow exponent

        global          fsdiv
fsdiv:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl prec
        bra.b           fdiv

        global          fddiv
fddiv:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl prec

        global          fdiv
fdiv:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1           # combine src tags

        bne.w           fdiv_not_norm           # optimize on non-norm input

#
# DIVIDE: NORMs and DENORMs ONLY!
#
fdiv_norm:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_to_zero_src       # scale src exponent
        mov.l           %d0,-(%sp)              # save scale factor 1

        bsr.l           scale_to_zero_dst       # scale dst exponent

        neg.l           (%sp)                   # SCALE FACTOR = scale1 - scale2
        add.l           %d0,(%sp)

        mov.w           2+L_SCR3(%a6),%d1       # fetch precision
        lsr.b           &0x6,%d1                # shift to lo bits
        mov.l           (%sp)+,%d0              # load S.F.
        cmp.l           %d0,(tbl_fdiv_ovfl.b,%pc,%d1.w*4) # will result overflow?
        ble.w           fdiv_may_ovfl           # result will overflow

        cmp.l           %d0,(tbl_fdiv_unfl.w,%pc,%d1.w*4) # will result underflow?
        beq.w           fdiv_may_unfl           # maybe
        bgt.w           fdiv_unfl               # yes; go handle underflow

fdiv_normal:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # save FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fdiv.x          FP_SCR0(%a6),%fp0       # perform divide

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fdiv_normal_exit:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store result on stack
        mov.l           %d2,-(%sp)              # store d2
        mov.w           FP_SCR0_EX(%a6),%d1     # load {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

tbl_fdiv_ovfl2:
        long            0x7fff
        long            0x407f
        long            0x43ff

fdiv_no_ovfl:
        mov.l           (%sp)+,%d0              # restore scale factor
        bra.b           fdiv_normal_exit

fdiv_may_ovfl:
        mov.l           %d0,-(%sp)              # save scale factor

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # set FPSR

        fdiv.x          FP_SCR0(%a6),%fp0       # execute divide

        fmov.l          %fpsr,%d0
        fmov.l          &0x0,%fpcr

        or.l            %d0,USER_FPSR(%a6)      # save INEX,N

        fmovm.x         &0x01,-(%sp)            # save result to stack
        mov.w           (%sp),%d0               # fetch new exponent
        add.l           &0xc,%sp                # clear result from stack
        andi.l          &0x7fff,%d0             # strip sign
        sub.l           (%sp),%d0               # add scale factor
        cmp.l           %d0,(tbl_fdiv_ovfl2.b,%pc,%d1.w*4)
        blt.b           fdiv_no_ovfl
        mov.l           (%sp)+,%d0

fdiv_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fdiv_ovfl_ena           # yes

fdiv_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass prec:rnd
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

fdiv_ovfl_ena:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fdiv_ovfl_ena_sd        # no, do sgl or dbl

fdiv_ovfl_ena_cont:
        fmovm.x         &0x80,FP_SCR0(%a6)      # move result to stack

        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.w           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1             # clear sign bit
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fdiv_ovfl_dis

fdiv_ovfl_ena_sd:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst operand

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # keep rnd mode
        fmov.l          %d1,%fpcr               # set FPCR

        fdiv.x          FP_SCR0(%a6),%fp0       # execute divide

        fmov.l          &0x0,%fpcr              # clear FPCR
        bra.b           fdiv_ovfl_ena_cont

fdiv_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fdiv.x          FP_SCR0(%a6),%fp0       # execute divide

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fdiv_unfl_ena           # yes

fdiv_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # 'Z' may have been set
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# UNFL is enabled.
#
fdiv_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fdiv_unfl_ena_sd        # no, sgl or dbl

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

fdiv_unfl_ena_cont:
        fmov.l          &0x0,%fpsr              # clear FPSR

        fdiv.x          FP_SCR0(%a6),%fp1       # execute divide

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # save result to stack
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factoer
        addi.l          &0x6000,%d1             # add bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exp
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.w           fdiv_unfl_dis

fdiv_unfl_ena_sd:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # use only rnd mode
        fmov.l          %d1,%fpcr               # set FPCR

        bra.b           fdiv_unfl_ena_cont

#
# the divide operation MAY underflow:
#
fdiv_may_unfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fdiv.x          FP_SCR0(%a6),%fp0       # execute divide

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x1               # is |result| > 1.b?
        fbgt.w          fdiv_normal_exit        # no; no underflow occurred
        fblt.w          fdiv_unfl               # yes; underflow occurred

#
# we still don't know if underflow occurred. result is ~ equal to 1. but,
# we don't know if the result was an underflow that rounded up to a 1
# or a normalized number that rounded down to a 1. so, redo the entire
# operation using RZ as the rounding mode to see what the pre-rounded
# result is. this case should be relatively rare.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op into fp1

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # keep rnd prec
        ori.b           &rz_mode*0x10,%d1       # insert RZ

        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fdiv.x          FP_SCR0(%a6),%fp1       # execute divide

        fmov.l          &0x0,%fpcr              # clear FPCR
        fabs.x          %fp1                    # make absolute value
        fcmp.b          %fp1,&0x1               # is |result| < 1.b?
        fbge.w          fdiv_normal_exit        # no; no underflow occurred
        bra.w           fdiv_unfl               # yes; underflow occurred

############################################################################

#
# Divide: inputs are not both normalized; what are they?
#
fdiv_not_norm:
        mov.w           (tbl_fdiv_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fdiv_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fdiv_op:
        short           fdiv_norm       - tbl_fdiv_op # NORM / NORM
        short           fdiv_inf_load   - tbl_fdiv_op # NORM / ZERO
        short           fdiv_zero_load  - tbl_fdiv_op # NORM / INF
        short           fdiv_res_qnan   - tbl_fdiv_op # NORM / QNAN
        short           fdiv_norm       - tbl_fdiv_op # NORM / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # NORM / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

        short           fdiv_zero_load  - tbl_fdiv_op # ZERO / NORM
        short           fdiv_res_operr  - tbl_fdiv_op # ZERO / ZERO
        short           fdiv_zero_load  - tbl_fdiv_op # ZERO / INF
        short           fdiv_res_qnan   - tbl_fdiv_op # ZERO / QNAN
        short           fdiv_zero_load  - tbl_fdiv_op # ZERO / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # ZERO / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

        short           fdiv_inf_dst    - tbl_fdiv_op # INF / NORM
        short           fdiv_inf_dst    - tbl_fdiv_op # INF / ZERO
        short           fdiv_res_operr  - tbl_fdiv_op # INF / INF
        short           fdiv_res_qnan   - tbl_fdiv_op # INF / QNAN
        short           fdiv_inf_dst    - tbl_fdiv_op # INF / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # INF / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

        short           fdiv_res_qnan   - tbl_fdiv_op # QNAN / NORM
        short           fdiv_res_qnan   - tbl_fdiv_op # QNAN / ZERO
        short           fdiv_res_qnan   - tbl_fdiv_op # QNAN / INF
        short           fdiv_res_qnan   - tbl_fdiv_op # QNAN / QNAN
        short           fdiv_res_qnan   - tbl_fdiv_op # QNAN / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # QNAN / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

        short           fdiv_norm       - tbl_fdiv_op # DENORM / NORM
        short           fdiv_inf_load   - tbl_fdiv_op # DENORM / ZERO
        short           fdiv_zero_load  - tbl_fdiv_op # DENORM / INF
        short           fdiv_res_qnan   - tbl_fdiv_op # DENORM / QNAN
        short           fdiv_norm       - tbl_fdiv_op # DENORM / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # DENORM / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / NORM
        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / ZERO
        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / INF
        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / QNAN
        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / DENORM
        short           fdiv_res_snan   - tbl_fdiv_op # SNAN / SNAN
        short           tbl_fdiv_op     - tbl_fdiv_op #
        short           tbl_fdiv_op     - tbl_fdiv_op #

fdiv_res_qnan:
        bra.l           res_qnan
fdiv_res_snan:
        bra.l           res_snan
fdiv_res_operr:
        bra.l           res_operr

        global          fdiv_zero_load          # global for fsgldiv
fdiv_zero_load:
        mov.b           SRC_EX(%a0),%d0         # result sign is exclusive
        mov.b           DST_EX(%a1),%d1         # or of input signs.
        eor.b           %d0,%d1
        bpl.b           fdiv_zero_load_p        # result is positive
        fmov.s          &0x80000000,%fp0        # load a -ZERO
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N
        rts
fdiv_zero_load_p:
        fmov.s          &0x00000000,%fp0        # load a +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

#
# The destination was In Range and the source was a ZERO. The result,
# therefore, is an INF w/ the proper sign.
# So, determine the sign and return a new INF (w/ the j-bit cleared).
#
        global          fdiv_inf_load           # global for fsgldiv
fdiv_inf_load:
        ori.w           &dz_mask+adz_mask,2+USER_FPSR(%a6) # no; set DZ/ADZ
        mov.b           SRC_EX(%a0),%d0         # load both signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bpl.b           fdiv_inf_load_p         # result is positive
        fmov.s          &0xff800000,%fp0        # make result -INF
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N
        rts
fdiv_inf_load_p:
        fmov.s          &0x7f800000,%fp0        # make result +INF
        mov.b           &inf_bmask,FPSR_CC(%a6) # set INF
        rts

#
# The destination was an INF w/ an In Range or ZERO source, the result is
# an INF w/ the proper sign.
# The 68881/882 returns the destination INF w/ the new sign(if the j-bit of the
# dst INF is set, then then j-bit of the result INF is also set).
#
        global          fdiv_inf_dst            # global for fsgldiv
fdiv_inf_dst:
        mov.b           DST_EX(%a1),%d0         # load both signs
        mov.b           SRC_EX(%a0),%d1
        eor.b           %d0,%d1
        bpl.b           fdiv_inf_dst_p          # result is positive

        fmovm.x         DST(%a1),&0x80          # return result in fp0
        fabs.x          %fp0                    # clear sign bit
        fneg.x          %fp0                    # set sign bit
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/NEG
        rts

fdiv_inf_dst_p:
        fmovm.x         DST(%a1),&0x80          # return result in fp0
        fabs.x          %fp0                    # return positive INF
        mov.b           &inf_bmask,FPSR_CC(%a6) # set INF
        rts

#########################################################################
# XDEF **************************************************************** #
#       fneg(): emulates the fneg instruction                           #
#       fsneg(): emulates the fsneg instruction                         #
#       fdneg(): emulates the fdneg instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize a denorm to provide EXOP                     #
#       scale_to_zero_src() - scale sgl/dbl source exponent             #
#       ovf_res() - return default overflow result                      #
#       unf_res() - return default underflow result                     #
#       res_qnan_1op() - return QNAN result                             #
#       res_snan_1op() - return SNAN result                             #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = rnd prec,mode                                              #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, zeroes, and infinities as special cases. Separate  #
# norms/denorms into ext/sgl/dbl precisions. Extended precision can be  #
# emulated by simply setting sign bit. Sgl/dbl operands must be scaled  #
# and an actual fneg performed to see if overflow/underflow would have  #
# occurred. If so, return default underflow/overflow result. Else,      #
# scale the result exponent and return result. FPSR gets set based on   #
# the result value.                                                     #
#                                                                       #
#########################################################################

        global          fsneg
fsneg:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl precision
        bra.b           fneg

        global          fdneg
fdneg:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl prec

        global          fneg
fneg:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info
        mov.b           STAG(%a6),%d1
        bne.w           fneg_not_norm           # optimize on non-norm input

#
# NEGATE SIGN : norms and denorms ONLY!
#
fneg_norm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.w           fneg_not_ext            # no; go handle sgl or dbl

#
# precision selected is extended. so...we can not get an underflow
# or overflow because of rounding to the correct precision. so...
# skip the scaling and unscaling...
#
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.w           SRC_EX(%a0),%d0
        eori.w          &0x8000,%d0             # negate sign
        bpl.b           fneg_norm_load          # sign is positive
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
fneg_norm_load:
        mov.w           %d0,FP_SCR0_EX(%a6)
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# for an extended precision DENORM, the UNFL exception bit is set
# the accrued bit is NOT set in this instance(no inexactness!)
#
fneg_denorm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.b           fneg_not_ext            # no; go handle sgl or dbl

        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.w           SRC_EX(%a0),%d0
        eori.w          &0x8000,%d0             # negate sign
        bpl.b           fneg_denorm_done        # no
        mov.b           &neg_bmask,FPSR_CC(%a6) # yes, set 'N' ccode bit
fneg_denorm_done:
        mov.w           %d0,FP_SCR0_EX(%a6)
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0

        btst            &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
        bne.b           fneg_ext_unfl_ena       # yes
        rts

#
# the input is an extended DENORM and underflow is enabled in the FPCR.
# normalize the mantissa and add the bias of 0x6000 to the resulting negative
# exponent and insert back into the operand.
#
fneg_ext_unfl_ena:
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        bsr.l           norm                    # normalize result
        neg.w           %d0                     # new exponent = -(shft val)
        addi.w          &0x6000,%d0             # add new bias to exponent
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch old sign,exp
        andi.w          &0x8000,%d1             # keep old sign
        andi.w          &0x7fff,%d0             # clear sign position
        or.w            %d1,%d0                 # concat old sign, new exponent
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

#
# operand is either single or double
#
fneg_not_ext:
        cmpi.b          %d0,&s_mode*0x10        # separate sgl/dbl prec
        bne.b           fneg_dbl

#
# operand is to be rounded to single precision
#
fneg_sgl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3f80      # will move in underflow?
        bge.w           fneg_sd_unfl            # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x407e      # will move in overflow?
        beq.w           fneg_sd_may_ovfl        # maybe; go check
        blt.w           fneg_sd_ovfl            # yes; go handle overflow

#
# operand will NOT overflow or underflow when moved in to the fp reg file
#
fneg_sd_normal:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fneg.x          FP_SCR0(%a6),%fp0       # perform negation

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fneg_sd_normal_exit:
        mov.l           %d2,-(%sp)              # save d2
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.w           FP_SCR0_EX(%a6),%d1     # load sgn,exp
        mov.w           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d1,%d2                 # concat old sign,new exp
        mov.w           %d2,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# operand is to be rounded to double precision
#
fneg_dbl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3c00      # will move in underflow?
        bge.b           fneg_sd_unfl            # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x43fe      # will move in overflow?
        beq.w           fneg_sd_may_ovfl        # maybe; go check
        blt.w           fneg_sd_ovfl            # yes; go handle overflow
        bra.w           fneg_sd_normal          # no; ho handle normalized op

#
# operand WILL underflow when moved in to the fp register file
#
fneg_sd_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        eori.b          &0x80,FP_SCR0_EX(%a6)   # negate sign
        bpl.b           fneg_sd_unfl_tst
        bset            &neg_bit,FPSR_CC(%a6)   # set 'N' ccode bit

# if underflow or inexact is enabled, go calculate EXOP first.
fneg_sd_unfl_tst:
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fneg_sd_unfl_ena        # yes

fneg_sd_unfl_dis:
        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # unf_res may have set 'Z'
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# operand will underflow AND underflow is enabled.
# therefore, we must return the result rounded to extended precision.
#
fneg_sd_unfl_ena:
        mov.l           FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
        mov.l           FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
        mov.w           FP_SCR0_EX(%a6),%d1     # load current exponent

        mov.l           %d2,-(%sp)              # save d2
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # subtract scale factor
        addi.l          &0x6000,%d1             # add new bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat new sign,new exp
        mov.w           %d1,FP_SCR1_EX(%a6)     # insert new exp
        fmovm.x         FP_SCR1(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fneg_sd_unfl_dis

#
# operand WILL overflow.
#
fneg_sd_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fneg.x          FP_SCR0(%a6),%fp0       # perform negation

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save FPSR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fneg_sd_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fneg_sd_ovfl_ena        # yes

#
# OVFL is not enabled; therefore, we must create the default result by
# calling ovf_res().
#
fneg_sd_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass: prec,mode
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

#
# OVFL is enabled.
# the INEX2 bit has already been updated by the round to the correct precision.
# now, round to extended(and don't alter the FPSR).
#
fneg_sd_ovfl_ena:
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat sign,exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fneg_sd_ovfl_dis

#
# the move in MAY underflow. so...
#
fneg_sd_may_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fneg.x          FP_SCR0(%a6),%fp0       # perform negation

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| >= 2.b?
        fbge.w          fneg_sd_ovfl_tst        # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fneg_sd_normal_exit

##########################################################################

#
# input is not normalized; what is it?
#
fneg_not_norm:
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.w           fneg_denorm
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        cmpi.b          %d1,&QNAN               # weed out QNAN
        beq.l           res_qnan_1op

#
# do the fneg; at this point, only possible ops are ZERO and INF.
# use fneg to determine ccodes.
# prec:mode should be zero at this point but it won't affect answer anyways.
#
        fneg.x          SRC_EX(%a0),%fp0        # do fneg
        fmov.l          %fpsr,%d0
        rol.l           &0x8,%d0                # put ccodes in lo byte
        mov.b           %d0,FPSR_CC(%a6)        # insert correct ccodes
        rts

#########################################################################
# XDEF **************************************************************** #
#       ftst(): emulates the ftest instruction                          #
#                                                                       #
# XREF **************************************************************** #
#       res{s,q}nan_1op() - set NAN result for monadic instruction      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#                                                                       #
# OUTPUT ************************************************************** #
#       none                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Check the source operand tag (STAG) and set the FPCR according  #
# to the operand type and sign.                                         #
#                                                                       #
#########################################################################

        global          ftst
ftst:
        mov.b           STAG(%a6),%d1
        bne.b           ftst_not_norm           # optimize on non-norm input

#
# Norm:
#
ftst_norm:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.b           ftst_norm_m             # yes
        rts
ftst_norm_m:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

#
# input is not normalized; what is it?
#
ftst_not_norm:
        cmpi.b          %d1,&ZERO               # weed out ZERO
        beq.b           ftst_zero
        cmpi.b          %d1,&INF                # weed out INF
        beq.b           ftst_inf
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        cmpi.b          %d1,&QNAN               # weed out QNAN
        beq.l           res_qnan_1op

#
# Denorm:
#
ftst_denorm:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.b           ftst_denorm_m           # yes
        rts
ftst_denorm_m:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit
        rts

#
# Infinity:
#
ftst_inf:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.b           ftst_inf_m              # yes
ftst_inf_p:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit
        rts
ftst_inf_m:
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'I','N' ccode bits
        rts

#
# Zero:
#
ftst_zero:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.b           ftst_zero_m             # yes
ftst_zero_p:
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'N' ccode bit
        rts
ftst_zero_m:
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
        rts

#########################################################################
# XDEF **************************************************************** #
#       fint(): emulates the fint instruction                           #
#                                                                       #
# XREF **************************************************************** #
#       res_{s,q}nan_1op() - set NAN result for monadic operation       #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = round precision/mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Separate according to operand type. Unnorms don't pass through  #
# here. For norms, load the rounding mode/prec, execute a "fint", then  #
# store the resulting FPSR bits.                                        #
#       For denorms, force the j-bit to a one and do the same as for    #
# norms. Denorms are so low that the answer will either be a zero or a  #
# one.                                                                  #
#       For zeroes/infs/NANs, return the same while setting the FPSR    #
# as appropriate.                                                       #
#                                                                       #
#########################################################################

        global          fint
fint:
        mov.b           STAG(%a6),%d1
        bne.b           fint_not_norm           # optimize on non-norm input

#
# Norm:
#
fint_norm:
        andi.b          &0x30,%d0               # set prec = ext

        fmov.l          %d0,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fint.x          SRC(%a0),%fp0           # execute fint

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d0               # save FPSR
        or.l            %d0,USER_FPSR(%a6)      # set exception bits

        rts

#
# input is not normalized; what is it?
#
fint_not_norm:
        cmpi.b          %d1,&ZERO               # weed out ZERO
        beq.b           fint_zero
        cmpi.b          %d1,&INF                # weed out INF
        beq.b           fint_inf
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.b           fint_denorm
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        bra.l           res_qnan_1op            # weed out QNAN

#
# Denorm:
#
# for DENORMs, the result will be either (+/-)ZERO or (+/-)1.
# also, the INEX2 and AINEX exception bits will be set.
# so, we could either set these manually or force the DENORM
# to a very small NORM and ship it to the NORM routine.
# I do the latter.
#
fint_denorm:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
        mov.b           &0x80,FP_SCR0_HI(%a6)   # force DENORM ==> small NORM
        lea             FP_SCR0(%a6),%a0
        bra.b           fint_norm

#
# Zero:
#
fint_zero:
        tst.b           SRC_EX(%a0)             # is ZERO negative?
        bmi.b           fint_zero_m             # yes
fint_zero_p:
        fmov.s          &0x00000000,%fp0        # return +ZERO in fp0
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'Z' ccode bit
        rts
fint_zero_m:
        fmov.s          &0x80000000,%fp0        # return -ZERO in fp0
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
        rts

#
# Infinity:
#
fint_inf:
        fmovm.x         SRC(%a0),&0x80          # return result in fp0
        tst.b           SRC_EX(%a0)             # is INF negative?
        bmi.b           fint_inf_m              # yes
fint_inf_p:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit
        rts
fint_inf_m:
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
        rts

#########################################################################
# XDEF **************************************************************** #
#       fintrz(): emulates the fintrz instruction                       #
#                                                                       #
# XREF **************************************************************** #
#       res_{s,q}nan_1op() - set NAN result for monadic operation       #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = round precision/mode                                       #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Separate according to operand type. Unnorms don't pass through  #
# here. For norms, load the rounding mode/prec, execute a "fintrz",     #
# then store the resulting FPSR bits.                                   #
#       For denorms, force the j-bit to a one and do the same as for    #
# norms. Denorms are so low that the answer will either be a zero or a  #
# one.                                                                  #
#       For zeroes/infs/NANs, return the same while setting the FPSR    #
# as appropriate.                                                       #
#                                                                       #
#########################################################################

        global          fintrz
fintrz:
        mov.b           STAG(%a6),%d1
        bne.b           fintrz_not_norm         # optimize on non-norm input

#
# Norm:
#
fintrz_norm:
        fmov.l          &0x0,%fpsr              # clear FPSR

        fintrz.x        SRC(%a0),%fp0           # execute fintrz

        fmov.l          %fpsr,%d0               # save FPSR
        or.l            %d0,USER_FPSR(%a6)      # set exception bits

        rts

#
# input is not normalized; what is it?
#
fintrz_not_norm:
        cmpi.b          %d1,&ZERO               # weed out ZERO
        beq.b           fintrz_zero
        cmpi.b          %d1,&INF                # weed out INF
        beq.b           fintrz_inf
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.b           fintrz_denorm
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        bra.l           res_qnan_1op            # weed out QNAN

#
# Denorm:
#
# for DENORMs, the result will be (+/-)ZERO.
# also, the INEX2 and AINEX exception bits will be set.
# so, we could either set these manually or force the DENORM
# to a very small NORM and ship it to the NORM routine.
# I do the latter.
#
fintrz_denorm:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp
        mov.b           &0x80,FP_SCR0_HI(%a6)   # force DENORM ==> small NORM
        lea             FP_SCR0(%a6),%a0
        bra.b           fintrz_norm

#
# Zero:
#
fintrz_zero:
        tst.b           SRC_EX(%a0)             # is ZERO negative?
        bmi.b           fintrz_zero_m           # yes
fintrz_zero_p:
        fmov.s          &0x00000000,%fp0        # return +ZERO in fp0
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'Z' ccode bit
        rts
fintrz_zero_m:
        fmov.s          &0x80000000,%fp0        # return -ZERO in fp0
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
        rts

#
# Infinity:
#
fintrz_inf:
        fmovm.x         SRC(%a0),&0x80          # return result in fp0
        tst.b           SRC_EX(%a0)             # is INF negative?
        bmi.b           fintrz_inf_m            # yes
fintrz_inf_p:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit
        rts
fintrz_inf_m:
        mov.b           &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits
        rts

#########################################################################
# XDEF **************************************************************** #
#       fabs():  emulates the fabs instruction                          #
#       fsabs(): emulates the fsabs instruction                         #
#       fdabs(): emulates the fdabs instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize denorm mantissa to provide EXOP              #
#       scale_to_zero_src() - make exponent. = 0; get scale factor      #
#       unf_res() - calculate underflow result                          #
#       ovf_res() - calculate overflow result                           #
#       res_{s,q}nan_1op() - set NAN result for monadic operation       #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = rnd precision/mode                                         #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms into extended, single, and double precision.                    #
#       Simply clear sign for extended precision norm. Ext prec denorm  #
# gets an EXOP created for it since it's an underflow.                  #
#       Double and single precision can overflow and underflow. First,  #
# scale the operand such that the exponent is zero. Perform an "fabs"   #
# using the correct rnd mode/prec. Check to see if the original         #
# exponent would take an exception. If so, use unf_res() or ovf_res()   #
# to calculate the default result. Also, create the EXOP for the        #
# exceptional case. If no exception should occur, insert the correct    #
# result exponent and return.                                           #
#       Unnorms don't pass through here.                                #
#                                                                       #
#########################################################################

        global          fsabs
fsabs:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl precision
        bra.b           fabs

        global          fdabs
fdabs:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl precision

        global          fabs
fabs:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info
        mov.b           STAG(%a6),%d1
        bne.w           fabs_not_norm           # optimize on non-norm input

#
# ABSOLUTE VALUE: norms and denorms ONLY!
#
fabs_norm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.b           fabs_not_ext            # no; go handle sgl or dbl

#
# precision selected is extended. so...we can not get an underflow
# or overflow because of rounding to the correct precision. so...
# skip the scaling and unscaling...
#
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.w           SRC_EX(%a0),%d1
        bclr            &15,%d1                 # force absolute value
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert exponent
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# for an extended precision DENORM, the UNFL exception bit is set
# the accrued bit is NOT set in this instance(no inexactness!)
#
fabs_denorm:
        andi.b          &0xc0,%d0               # is precision extended?
        bne.b           fabs_not_ext            # no

        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.w           SRC_EX(%a0),%d0
        bclr            &15,%d0                 # clear sign
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert exponent

        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0

        btst            &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled?
        bne.b           fabs_ext_unfl_ena
        rts

#
# the input is an extended DENORM and underflow is enabled in the FPCR.
# normalize the mantissa and add the bias of 0x6000 to the resulting negative
# exponent and insert back into the operand.
#
fabs_ext_unfl_ena:
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        bsr.l           norm                    # normalize result
        neg.w           %d0                     # new exponent = -(shft val)
        addi.w          &0x6000,%d0             # add new bias to exponent
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch old sign,exp
        andi.w          &0x8000,%d1             # keep old sign
        andi.w          &0x7fff,%d0             # clear sign position
        or.w            %d1,%d0                 # concat old sign, new exponent
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

#
# operand is either single or double
#
fabs_not_ext:
        cmpi.b          %d0,&s_mode*0x10        # separate sgl/dbl prec
        bne.b           fabs_dbl

#
# operand is to be rounded to single precision
#
fabs_sgl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3f80      # will move in underflow?
        bge.w           fabs_sd_unfl            # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x407e      # will move in overflow?
        beq.w           fabs_sd_may_ovfl        # maybe; go check
        blt.w           fabs_sd_ovfl            # yes; go handle overflow

#
# operand will NOT overflow or underflow when moved in to the fp reg file
#
fabs_sd_normal:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fabs.x          FP_SCR0(%a6),%fp0       # perform absolute

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fabs_sd_normal_exit:
        mov.l           %d2,-(%sp)              # save d2
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.w           FP_SCR0_EX(%a6),%d1     # load sgn,exp
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d1,%d2                 # concat old sign,new exp
        mov.w           %d2,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# operand is to be rounded to double precision
#
fabs_dbl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3c00      # will move in underflow?
        bge.b           fabs_sd_unfl            # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x43fe      # will move in overflow?
        beq.w           fabs_sd_may_ovfl        # maybe; go check
        blt.w           fabs_sd_ovfl            # yes; go handle overflow
        bra.w           fabs_sd_normal          # no; ho handle normalized op

#
# operand WILL underflow when moved in to the fp register file
#
fabs_sd_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        bclr            &0x7,FP_SCR0_EX(%a6)    # force absolute value

# if underflow or inexact is enabled, go calculate EXOP first.
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fabs_sd_unfl_ena        # yes

fabs_sd_unfl_dis:
        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set possible 'Z' ccode
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# operand will underflow AND underflow is enabled.
# therefore, we must return the result rounded to extended precision.
#
fabs_sd_unfl_ena:
        mov.l           FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
        mov.l           FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
        mov.w           FP_SCR0_EX(%a6),%d1     # load current exponent

        mov.l           %d2,-(%sp)              # save d2
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # subtract scale factor
        addi.l          &0x6000,%d1             # add new bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat new sign,new exp
        mov.w           %d1,FP_SCR1_EX(%a6)     # insert new exp
        fmovm.x         FP_SCR1(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fabs_sd_unfl_dis

#
# operand WILL overflow.
#
fabs_sd_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fabs.x          FP_SCR0(%a6),%fp0       # perform absolute

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save FPSR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fabs_sd_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fabs_sd_ovfl_ena        # yes

#
# OVFL is not enabled; therefore, we must create the default result by
# calling ovf_res().
#
fabs_sd_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass: prec,mode
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

#
# OVFL is enabled.
# the INEX2 bit has already been updated by the round to the correct precision.
# now, round to extended(and don't alter the FPSR).
#
fabs_sd_ovfl_ena:
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat sign,exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fabs_sd_ovfl_dis

#
# the move in MAY underflow. so...
#
fabs_sd_may_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fabs.x          FP_SCR0(%a6),%fp0       # perform absolute

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| >= 2.b?
        fbge.w          fabs_sd_ovfl_tst        # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fabs_sd_normal_exit

##########################################################################

#
# input is not normalized; what is it?
#
fabs_not_norm:
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.w           fabs_denorm
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        cmpi.b          %d1,&QNAN               # weed out QNAN
        beq.l           res_qnan_1op

        fabs.x          SRC(%a0),%fp0           # force absolute value

        cmpi.b          %d1,&INF                # weed out INF
        beq.b           fabs_inf
fabs_zero:
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'Z' ccode bit
        rts
fabs_inf:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit
        rts

#########################################################################
# XDEF **************************************************************** #
#       fcmp(): fp compare op routine                                   #
#                                                                       #
# XREF **************************************************************** #
#       res_qnan() - return QNAN result                                 #
#       res_snan() - return SNAN result                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#       d0 = round prec/mode                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       None                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs and denorms as special cases. For everything else,  #
# just use the actual fcmp instruction to produce the correct condition #
# codes.                                                                #
#                                                                       #
#########################################################################

        global          fcmp
fcmp:
        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1
        bne.b           fcmp_not_norm           # optimize on non-norm input

#
# COMPARE FP OPs : NORMs, ZEROs, INFs, and "corrected" DENORMs
#
fcmp_norm:
        fmovm.x         DST(%a1),&0x80          # load dst op

        fcmp.x          %fp0,SRC(%a0)           # do compare

        fmov.l          %fpsr,%d0               # save FPSR
        rol.l           &0x8,%d0                # extract ccode bits
        mov.b           %d0,FPSR_CC(%a6)        # set ccode bits(no exc bits are set)

        rts

#
# fcmp: inputs are not both normalized; what are they?
#
fcmp_not_norm:
        mov.w           (tbl_fcmp_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fcmp_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fcmp_op:
        short           fcmp_norm       - tbl_fcmp_op # NORM - NORM
        short           fcmp_norm       - tbl_fcmp_op # NORM - ZERO
        short           fcmp_norm       - tbl_fcmp_op # NORM - INF
        short           fcmp_res_qnan   - tbl_fcmp_op # NORM - QNAN
        short           fcmp_nrm_dnrm   - tbl_fcmp_op # NORM - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # NORM - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

        short           fcmp_norm       - tbl_fcmp_op # ZERO - NORM
        short           fcmp_norm       - tbl_fcmp_op # ZERO - ZERO
        short           fcmp_norm       - tbl_fcmp_op # ZERO - INF
        short           fcmp_res_qnan   - tbl_fcmp_op # ZERO - QNAN
        short           fcmp_dnrm_s     - tbl_fcmp_op # ZERO - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # ZERO - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

        short           fcmp_norm       - tbl_fcmp_op # INF - NORM
        short           fcmp_norm       - tbl_fcmp_op # INF - ZERO
        short           fcmp_norm       - tbl_fcmp_op # INF - INF
        short           fcmp_res_qnan   - tbl_fcmp_op # INF - QNAN
        short           fcmp_dnrm_s     - tbl_fcmp_op # INF - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # INF - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

        short           fcmp_res_qnan   - tbl_fcmp_op # QNAN - NORM
        short           fcmp_res_qnan   - tbl_fcmp_op # QNAN - ZERO
        short           fcmp_res_qnan   - tbl_fcmp_op # QNAN - INF
        short           fcmp_res_qnan   - tbl_fcmp_op # QNAN - QNAN
        short           fcmp_res_qnan   - tbl_fcmp_op # QNAN - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # QNAN - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

        short           fcmp_dnrm_nrm   - tbl_fcmp_op # DENORM - NORM
        short           fcmp_dnrm_d     - tbl_fcmp_op # DENORM - ZERO
        short           fcmp_dnrm_d     - tbl_fcmp_op # DENORM - INF
        short           fcmp_res_qnan   - tbl_fcmp_op # DENORM - QNAN
        short           fcmp_dnrm_sd    - tbl_fcmp_op # DENORM - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # DENORM - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - NORM
        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - ZERO
        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - INF
        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - QNAN
        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - DENORM
        short           fcmp_res_snan   - tbl_fcmp_op # SNAN - SNAN
        short           tbl_fcmp_op     - tbl_fcmp_op #
        short           tbl_fcmp_op     - tbl_fcmp_op #

# unlike all other functions for QNAN and SNAN, fcmp does NOT set the
# 'N' bit for a negative QNAN or SNAN input so we must squelch it here.
fcmp_res_qnan:
        bsr.l           res_qnan
        andi.b          &0xf7,FPSR_CC(%a6)
        rts
fcmp_res_snan:
        bsr.l           res_snan
        andi.b          &0xf7,FPSR_CC(%a6)
        rts

#
# DENORMs are a little more difficult.
# If you have a 2 DENORMs, then you can just force the j-bit to a one
# and use the fcmp_norm routine.
# If you have a DENORM and an INF or ZERO, just force the DENORM's j-bit to a one
# and use the fcmp_norm routine.
# If you have a DENORM and a NORM with opposite signs, then use fcmp_norm, also.
# But with a DENORM and a NORM of the same sign, the neg bit is set if the
# (1) signs are (+) and the DENORM is the dst or
# (2) signs are (-) and the DENORM is the src
#

fcmp_dnrm_s:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),%d0
        bset            &31,%d0                 # DENORM src; make into small norm
        mov.l           %d0,FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        lea             FP_SCR0(%a6),%a0
        bra.w           fcmp_norm

fcmp_dnrm_d:
        mov.l           DST_EX(%a1),FP_SCR0_EX(%a6)
        mov.l           DST_HI(%a1),%d0
        bset            &31,%d0                 # DENORM src; make into small norm
        mov.l           %d0,FP_SCR0_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR0_LO(%a6)
        lea             FP_SCR0(%a6),%a1
        bra.w           fcmp_norm

fcmp_dnrm_sd:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           DST_HI(%a1),%d0
        bset            &31,%d0                 # DENORM dst; make into small norm
        mov.l           %d0,FP_SCR1_HI(%a6)
        mov.l           SRC_HI(%a0),%d0
        bset            &31,%d0                 # DENORM dst; make into small norm
        mov.l           %d0,FP_SCR0_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        lea             FP_SCR1(%a6),%a1
        lea             FP_SCR0(%a6),%a0
        bra.w           fcmp_norm

fcmp_nrm_dnrm:
        mov.b           SRC_EX(%a0),%d0         # determine if like signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bmi.w           fcmp_dnrm_s

# signs are the same, so must determine the answer ourselves.
        tst.b           %d0                     # is src op negative?
        bmi.b           fcmp_nrm_dnrm_m         # yes
        rts
fcmp_nrm_dnrm_m:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'Z' ccode bit
        rts

fcmp_dnrm_nrm:
        mov.b           SRC_EX(%a0),%d0         # determine if like signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bmi.w           fcmp_dnrm_d

# signs are the same, so must determine the answer ourselves.
        tst.b           %d0                     # is src op negative?
        bpl.b           fcmp_dnrm_nrm_m         # no
        rts
fcmp_dnrm_nrm_m:
        mov.b           &neg_bmask,FPSR_CC(%a6) # set 'Z' ccode bit
        rts

#########################################################################
# XDEF **************************************************************** #
#       fsglmul(): emulates the fsglmul instruction                     #
#                                                                       #
# XREF **************************************************************** #
#       scale_to_zero_src() - scale src exponent to zero                #
#       scale_to_zero_dst() - scale dst exponent to zero                #
#       unf_res4() - return default underflow result for sglop          #
#       ovf_res() - return default overflow result                      #
#       res_qnan() - return QNAN result                                 #
#       res_snan() - return SNAN result                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#       d0  rnd prec,mode                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms/denorms into ext/sgl/dbl precision.                             #
#       For norms/denorms, scale the exponents such that a multiply     #
# instruction won't cause an exception. Use the regular fsglmul to      #
# compute a result. Check if the regular operands would have taken      #
# an exception. If so, return the default overflow/underflow result     #
# and return the EXOP if exceptions are enabled. Else, scale the        #
# result operand to the proper exponent.                                #
#                                                                       #
#########################################################################

        global          fsglmul
fsglmul:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1

        bne.w           fsglmul_not_norm        # optimize on non-norm input

fsglmul_norm:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_to_zero_src       # scale exponent
        mov.l           %d0,-(%sp)              # save scale factor 1

        bsr.l           scale_to_zero_dst       # scale dst exponent

        add.l           (%sp)+,%d0              # SCALE_FACTOR = scale1 + scale2

        cmpi.l          %d0,&0x3fff-0x7ffe      # would result ovfl?
        beq.w           fsglmul_may_ovfl        # result may rnd to overflow
        blt.w           fsglmul_ovfl            # result will overflow

        cmpi.l          %d0,&0x3fff+0x0001      # would result unfl?
        beq.w           fsglmul_may_unfl        # result may rnd to no unfl
        bgt.w           fsglmul_unfl            # result will underflow

fsglmul_normal:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp0       # execute sgl multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fsglmul_normal_exit:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # load {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

fsglmul_ovfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp0       # execute sgl multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fsglmul_ovfl_tst:

# save setting this until now because this is where fsglmul_may_ovfl may jump in
        or.l            &ovfl_inx_mask, USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fsglmul_ovfl_ena        # yes

fsglmul_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass prec:rnd
        andi.b          &0x30,%d0               # force prec = ext
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

fsglmul_ovfl_ena:
        fmovm.x         &0x80,FP_SCR0(%a6)      # move result to stack

        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fsglmul_ovfl_dis

fsglmul_may_ovfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp0       # execute sgl multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| >= 2.b?
        fbge.w          fsglmul_ovfl_tst        # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fsglmul_normal_exit

fsglmul_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp0       # execute sgl multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fsglmul_unfl_ena        # yes

fsglmul_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res4                # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # 'Z' bit may have been set
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# UNFL is enabled.
#
fsglmul_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp1       # execute sgl multiply

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # save result to stack
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        addi.l          &0x6000,%d1             # add bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.w           fsglmul_unfl_dis

fsglmul_may_unfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp0       # execute sgl multiply

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x2               # is |result| > 2.b?
        fbgt.w          fsglmul_normal_exit     # no; no underflow occurred
        fblt.w          fsglmul_unfl            # yes; underflow occurred

#
# we still don't know if underflow occurred. result is ~ equal to 2. but,
# we don't know if the result was an underflow that rounded up to a 2 or
# a normalized number that rounded down to a 2. so, redo the entire operation
# using RZ as the rounding mode to see what the pre-rounded result is.
# this case should be relatively rare.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op into fp1

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # keep rnd prec
        ori.b           &rz_mode*0x10,%d1       # insert RZ

        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsglmul.x       FP_SCR0(%a6),%fp1       # execute sgl multiply

        fmov.l          &0x0,%fpcr              # clear FPCR
        fabs.x          %fp1                    # make absolute value
        fcmp.b          %fp1,&0x2               # is |result| < 2.b?
        fbge.w          fsglmul_normal_exit     # no; no underflow occurred
        bra.w           fsglmul_unfl            # yes, underflow occurred

##############################################################################

#
# Single Precision Multiply: inputs are not both normalized; what are they?
#
fsglmul_not_norm:
        mov.w           (tbl_fsglmul_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fsglmul_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fsglmul_op:
        short           fsglmul_norm            - tbl_fsglmul_op # NORM x NORM
        short           fsglmul_zero            - tbl_fsglmul_op # NORM x ZERO
        short           fsglmul_inf_src         - tbl_fsglmul_op # NORM x INF
        short           fsglmul_res_qnan        - tbl_fsglmul_op # NORM x QNAN
        short           fsglmul_norm            - tbl_fsglmul_op # NORM x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # NORM x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

        short           fsglmul_zero            - tbl_fsglmul_op # ZERO x NORM
        short           fsglmul_zero            - tbl_fsglmul_op # ZERO x ZERO
        short           fsglmul_res_operr       - tbl_fsglmul_op # ZERO x INF
        short           fsglmul_res_qnan        - tbl_fsglmul_op # ZERO x QNAN
        short           fsglmul_zero            - tbl_fsglmul_op # ZERO x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # ZERO x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

        short           fsglmul_inf_dst         - tbl_fsglmul_op # INF x NORM
        short           fsglmul_res_operr       - tbl_fsglmul_op # INF x ZERO
        short           fsglmul_inf_dst         - tbl_fsglmul_op # INF x INF
        short           fsglmul_res_qnan        - tbl_fsglmul_op # INF x QNAN
        short           fsglmul_inf_dst         - tbl_fsglmul_op # INF x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # INF x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

        short           fsglmul_res_qnan        - tbl_fsglmul_op # QNAN x NORM
        short           fsglmul_res_qnan        - tbl_fsglmul_op # QNAN x ZERO
        short           fsglmul_res_qnan        - tbl_fsglmul_op # QNAN x INF
        short           fsglmul_res_qnan        - tbl_fsglmul_op # QNAN x QNAN
        short           fsglmul_res_qnan        - tbl_fsglmul_op # QNAN x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # QNAN x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

        short           fsglmul_norm            - tbl_fsglmul_op # NORM x NORM
        short           fsglmul_zero            - tbl_fsglmul_op # NORM x ZERO
        short           fsglmul_inf_src         - tbl_fsglmul_op # NORM x INF
        short           fsglmul_res_qnan        - tbl_fsglmul_op # NORM x QNAN
        short           fsglmul_norm            - tbl_fsglmul_op # NORM x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # NORM x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x NORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x ZERO
        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x INF
        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x QNAN
        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x DENORM
        short           fsglmul_res_snan        - tbl_fsglmul_op # SNAN x SNAN
        short           tbl_fsglmul_op          - tbl_fsglmul_op #
        short           tbl_fsglmul_op          - tbl_fsglmul_op #

fsglmul_res_operr:
        bra.l           res_operr
fsglmul_res_snan:
        bra.l           res_snan
fsglmul_res_qnan:
        bra.l           res_qnan
fsglmul_zero:
        bra.l           fmul_zero
fsglmul_inf_src:
        bra.l           fmul_inf_src
fsglmul_inf_dst:
        bra.l           fmul_inf_dst

#########################################################################
# XDEF **************************************************************** #
#       fsgldiv(): emulates the fsgldiv instruction                     #
#                                                                       #
# XREF **************************************************************** #
#       scale_to_zero_src() - scale src exponent to zero                #
#       scale_to_zero_dst() - scale dst exponent to zero                #
#       unf_res4() - return default underflow result for sglop          #
#       ovf_res() - return default overflow result                      #
#       res_qnan() - return QNAN result                                 #
#       res_snan() - return SNAN result                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#       d0  rnd prec,mode                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms/denorms into ext/sgl/dbl precision.                             #
#       For norms/denorms, scale the exponents such that a divide       #
# instruction won't cause an exception. Use the regular fsgldiv to      #
# compute a result. Check if the regular operands would have taken      #
# an exception. If so, return the default overflow/underflow result     #
# and return the EXOP if exceptions are enabled. Else, scale the        #
# result operand to the proper exponent.                                #
#                                                                       #
#########################################################################

        global          fsgldiv
fsgldiv:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1           # combine src tags

        bne.w           fsgldiv_not_norm        # optimize on non-norm input

#
# DIVIDE: NORMs and DENORMs ONLY!
#
fsgldiv_norm:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_to_zero_src       # calculate scale factor 1
        mov.l           %d0,-(%sp)              # save scale factor 1

        bsr.l           scale_to_zero_dst       # calculate scale factor 2

        neg.l           (%sp)                   # S.F. = scale1 - scale2
        add.l           %d0,(%sp)

        mov.w           2+L_SCR3(%a6),%d1       # fetch precision,mode
        lsr.b           &0x6,%d1
        mov.l           (%sp)+,%d0
        cmpi.l          %d0,&0x3fff-0x7ffe
        ble.w           fsgldiv_may_ovfl

        cmpi.l          %d0,&0x3fff-0x0000      # will result underflow?
        beq.w           fsgldiv_may_unfl        # maybe
        bgt.w           fsgldiv_unfl            # yes; go handle underflow

fsgldiv_normal:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # save FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp0       # perform sgl divide

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fsgldiv_normal_exit:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store result on stack
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # load {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

fsgldiv_may_ovfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # set FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp0       # execute divide

        fmov.l          %fpsr,%d1
        fmov.l          &0x0,%fpcr

        or.l            %d1,USER_FPSR(%a6)      # save INEX,N

        fmovm.x         &0x01,-(%sp)            # save result to stack
        mov.w           (%sp),%d1               # fetch new exponent
        add.l           &0xc,%sp                # clear result
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        cmp.l           %d1,&0x7fff             # did divide overflow?
        blt.b           fsgldiv_normal_exit

fsgldiv_ovfl_tst:
        or.w            &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fsgldiv_ovfl_ena        # yes

fsgldiv_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass prec:rnd
        andi.b          &0x30,%d0               # kill precision
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

fsgldiv_ovfl_ena:
        fmovm.x         &0x80,FP_SCR0(%a6)      # move result to stack

        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract new bias
        andi.w          &0x7fff,%d1             # clear ms bit
        or.w            %d2,%d1                 # concat old sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fsgldiv_ovfl_dis

fsgldiv_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp0       # execute sgl divide

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fsgldiv_unfl_ena        # yes

fsgldiv_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res4                # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # 'Z' bit may have been set
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# UNFL is enabled.
#
fsgldiv_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp1       # execute sgl divide

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # save result to stack
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        addi.l          &0x6000,%d1             # add bias
        andi.w          &0x7fff,%d1             # clear top bit
        or.w            %d2,%d1                 # concat old sign, new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.b           fsgldiv_unfl_dis

#
# the divide operation MAY underflow:
#
fsgldiv_may_unfl:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp0       # execute sgl divide

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fabs.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x1               # is |result| > 1.b?
        fbgt.w          fsgldiv_normal_exit     # no; no underflow occurred
        fblt.w          fsgldiv_unfl            # yes; underflow occurred

#
# we still don't know if underflow occurred. result is ~ equal to 1. but,
# we don't know if the result was an underflow that rounded up to a 1
# or a normalized number that rounded down to a 1. so, redo the entire
# operation using RZ as the rounding mode to see what the pre-rounded
# result is. this case should be relatively rare.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op into %fp1

        clr.l           %d1                     # clear scratch register
        ori.b           &rz_mode*0x10,%d1       # force RZ rnd mode

        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsgldiv.x       FP_SCR0(%a6),%fp1       # execute sgl divide

        fmov.l          &0x0,%fpcr              # clear FPCR
        fabs.x          %fp1                    # make absolute value
        fcmp.b          %fp1,&0x1               # is |result| < 1.b?
        fbge.w          fsgldiv_normal_exit     # no; no underflow occurred
        bra.w           fsgldiv_unfl            # yes; underflow occurred

############################################################################

#
# Divide: inputs are not both normalized; what are they?
#
fsgldiv_not_norm:
        mov.w           (tbl_fsgldiv_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fsgldiv_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fsgldiv_op:
        short           fsgldiv_norm            - tbl_fsgldiv_op # NORM / NORM
        short           fsgldiv_inf_load        - tbl_fsgldiv_op # NORM / ZERO
        short           fsgldiv_zero_load       - tbl_fsgldiv_op # NORM / INF
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # NORM / QNAN
        short           fsgldiv_norm            - tbl_fsgldiv_op # NORM / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # NORM / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

        short           fsgldiv_zero_load       - tbl_fsgldiv_op # ZERO / NORM
        short           fsgldiv_res_operr       - tbl_fsgldiv_op # ZERO / ZERO
        short           fsgldiv_zero_load       - tbl_fsgldiv_op # ZERO / INF
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # ZERO / QNAN
        short           fsgldiv_zero_load       - tbl_fsgldiv_op # ZERO / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # ZERO / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

        short           fsgldiv_inf_dst         - tbl_fsgldiv_op # INF / NORM
        short           fsgldiv_inf_dst         - tbl_fsgldiv_op # INF / ZERO
        short           fsgldiv_res_operr       - tbl_fsgldiv_op # INF / INF
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # INF / QNAN
        short           fsgldiv_inf_dst         - tbl_fsgldiv_op # INF / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # INF / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # QNAN / NORM
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # QNAN / ZERO
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # QNAN / INF
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # QNAN / QNAN
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # QNAN / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # QNAN / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

        short           fsgldiv_norm            - tbl_fsgldiv_op # DENORM / NORM
        short           fsgldiv_inf_load        - tbl_fsgldiv_op # DENORM / ZERO
        short           fsgldiv_zero_load       - tbl_fsgldiv_op # DENORM / INF
        short           fsgldiv_res_qnan        - tbl_fsgldiv_op # DENORM / QNAN
        short           fsgldiv_norm            - tbl_fsgldiv_op # DENORM / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # DENORM / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / NORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / ZERO
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / INF
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / QNAN
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / DENORM
        short           fsgldiv_res_snan        - tbl_fsgldiv_op # SNAN / SNAN
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #
        short           tbl_fsgldiv_op          - tbl_fsgldiv_op #

fsgldiv_res_qnan:
        bra.l           res_qnan
fsgldiv_res_snan:
        bra.l           res_snan
fsgldiv_res_operr:
        bra.l           res_operr
fsgldiv_inf_load:
        bra.l           fdiv_inf_load
fsgldiv_zero_load:
        bra.l           fdiv_zero_load
fsgldiv_inf_dst:
        bra.l           fdiv_inf_dst

#########################################################################
# XDEF **************************************************************** #
#       fadd(): emulates the fadd instruction                           #
#       fsadd(): emulates the fadd instruction                          #
#       fdadd(): emulates the fdadd instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       addsub_scaler2() - scale the operands so they won't take exc    #
#       ovf_res() - return default overflow result                      #
#       unf_res() - return default underflow result                     #
#       res_qnan() - set QNAN result                                    #
#       res_snan() - set SNAN result                                    #
#       res_operr() - set OPERR result                                  #
#       scale_to_zero_src() - set src operand exponent equal to zero    #
#       scale_to_zero_dst() - set dst operand exponent equal to zero    #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms into extended, single, and double precision.                    #
#       Do addition after scaling exponents such that exception won't   #
# occur. Then, check result exponent to see if exception would have     #
# occurred. If so, return default result and maybe EXOP. Else, insert   #
# the correct result exponent and return. Set FPSR bits as appropriate. #
#                                                                       #
#########################################################################

        global          fsadd
fsadd:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl prec
        bra.b           fadd

        global          fdadd
fdadd:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl prec

        global          fadd
fadd:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1           # combine src tags

        bne.w           fadd_not_norm           # optimize on non-norm input

#
# ADD: norms and denorms
#
fadd_norm:
        bsr.l           addsub_scaler2          # scale exponents

fadd_zero_entry:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fadd.x          FP_SCR0(%a6),%fp0       # execute add

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # fetch INEX2,N,Z

        or.l            %d1,USER_FPSR(%a6)      # save exc and ccode bits

        fbeq.w          fadd_zero_exit          # if result is zero, end now

        mov.l           %d2,-(%sp)              # save d2

        fmovm.x         &0x01,-(%sp)            # save result to stack

        mov.w           2+L_SCR3(%a6),%d1
        lsr.b           &0x6,%d1

        mov.w           (%sp),%d2               # fetch new sign, exp
        andi.l          &0x7fff,%d2             # strip sign
        sub.l           %d0,%d2                 # add scale factor

        cmp.l           %d2,(tbl_fadd_ovfl.b,%pc,%d1.w*4) # is it an overflow?
        bge.b           fadd_ovfl               # yes

        cmp.l           %d2,(tbl_fadd_unfl.b,%pc,%d1.w*4) # is it an underflow?
        blt.w           fadd_unfl               # yes
        beq.w           fadd_may_unfl           # maybe; go find out

fadd_normal:
        mov.w           (%sp),%d1
        andi.w          &0x8000,%d1             # keep sign
        or.w            %d2,%d1                 # concat sign,new exp
        mov.w           %d1,(%sp)               # insert new exponent

        fmovm.x         (%sp)+,&0x80            # return result in fp0

        mov.l           (%sp)+,%d2              # restore d2
        rts

fadd_zero_exit:
#       fmov.s          &0x00000000,%fp0        # return zero in fp0
        rts

tbl_fadd_ovfl:
        long            0x7fff                  # ext ovfl
        long            0x407f                  # sgl ovfl
        long            0x43ff                  # dbl ovfl

tbl_fadd_unfl:
        long            0x0000                  # ext unfl
        long            0x3f81                  # sgl unfl
        long            0x3c01                  # dbl unfl

fadd_ovfl:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fadd_ovfl_ena           # yes

        add.l           &0xc,%sp
fadd_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass prec:rnd
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        mov.l           (%sp)+,%d2              # restore d2
        rts

fadd_ovfl_ena:
        mov.b           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fadd_ovfl_ena_sd        # no; prec = sgl or dbl

fadd_ovfl_ena_cont:
        mov.w           (%sp),%d1
        andi.w          &0x8000,%d1             # keep sign
        subi.l          &0x6000,%d2             # add extra bias
        andi.w          &0x7fff,%d2
        or.w            %d2,%d1                 # concat sign,new exp
        mov.w           %d1,(%sp)               # insert new exponent

        fmovm.x         (%sp)+,&0x40            # return EXOP in fp1
        bra.b           fadd_ovfl_dis

fadd_ovfl_ena_sd:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # keep rnd mode
        fmov.l          %d1,%fpcr               # set FPCR

        fadd.x          FP_SCR0(%a6),%fp0       # execute add

        fmov.l          &0x0,%fpcr              # clear FPCR

        add.l           &0xc,%sp
        fmovm.x         &0x01,-(%sp)
        bra.b           fadd_ovfl_ena_cont

fadd_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        add.l           &0xc,%sp

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fadd.x          FP_SCR0(%a6),%fp0       # execute add

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save status

        or.l            %d1,USER_FPSR(%a6)      # save INEX,N

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fadd_unfl_ena           # yes

fadd_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # 'Z' bit may have been set
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        mov.l           (%sp)+,%d2              # restore d2
        rts

fadd_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fadd_unfl_ena_sd        # no; sgl or dbl

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

fadd_unfl_ena_cont:
        fmov.l          &0x0,%fpsr              # clear FPSR

        fadd.x          FP_SCR0(%a6),%fp1       # execute multiply

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # save result to stack
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        addi.l          &0x6000,%d1             # add new bias
        andi.w          &0x7fff,%d1             # clear top bit
        or.w            %d2,%d1                 # concat sign,new exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.w           fadd_unfl_dis

fadd_unfl_ena_sd:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # use only rnd mode
        fmov.l          %d1,%fpcr               # set FPCR

        bra.b           fadd_unfl_ena_cont

#
# result is equal to the smallest normalized number in the selected precision
# if the precision is extended, this result could not have come from an
# underflow that rounded up.
#
fadd_may_unfl:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1
        beq.w           fadd_normal             # yes; no underflow occurred

        mov.l           0x4(%sp),%d1            # extract hi(man)
        cmpi.l          %d1,&0x80000000         # is hi(man) = 0x80000000?
        bne.w           fadd_normal             # no; no underflow occurred

        tst.l           0x8(%sp)                # is lo(man) = 0x0?
        bne.w           fadd_normal             # no; no underflow occurred

        btst            &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
        beq.w           fadd_normal             # no; no underflow occurred

#
# ok, so now the result has a exponent equal to the smallest normalized
# exponent for the selected precision. also, the mantissa is equal to
# 0x8000000000000000 and this mantissa is the result of rounding non-zero
# g,r,s.
# now, we must determine whether the pre-rounded result was an underflow
# rounded "up" or a normalized number rounded "down".
# so, we do this be re-executing the add using RZ as the rounding mode and
# seeing if the new result is smaller or equal to the current result.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op into fp1

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # keep rnd prec
        ori.b           &rz_mode*0x10,%d1       # insert rnd mode
        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fadd.x          FP_SCR0(%a6),%fp1       # execute add

        fmov.l          &0x0,%fpcr              # clear FPCR

        fabs.x          %fp0                    # compare absolute values
        fabs.x          %fp1
        fcmp.x          %fp0,%fp1               # is first result > second?

        fbgt.w          fadd_unfl               # yes; it's an underflow
        bra.w           fadd_normal             # no; it's not an underflow

##########################################################################

#
# Add: inputs are not both normalized; what are they?
#
fadd_not_norm:
        mov.w           (tbl_fadd_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fadd_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fadd_op:
        short           fadd_norm       - tbl_fadd_op # NORM + NORM
        short           fadd_zero_src   - tbl_fadd_op # NORM + ZERO
        short           fadd_inf_src    - tbl_fadd_op # NORM + INF
        short           fadd_res_qnan   - tbl_fadd_op # NORM + QNAN
        short           fadd_norm       - tbl_fadd_op # NORM + DENORM
        short           fadd_res_snan   - tbl_fadd_op # NORM + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

        short           fadd_zero_dst   - tbl_fadd_op # ZERO + NORM
        short           fadd_zero_2     - tbl_fadd_op # ZERO + ZERO
        short           fadd_inf_src    - tbl_fadd_op # ZERO + INF
        short           fadd_res_qnan   - tbl_fadd_op # NORM + QNAN
        short           fadd_zero_dst   - tbl_fadd_op # ZERO + DENORM
        short           fadd_res_snan   - tbl_fadd_op # NORM + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

        short           fadd_inf_dst    - tbl_fadd_op # INF + NORM
        short           fadd_inf_dst    - tbl_fadd_op # INF + ZERO
        short           fadd_inf_2      - tbl_fadd_op # INF + INF
        short           fadd_res_qnan   - tbl_fadd_op # NORM + QNAN
        short           fadd_inf_dst    - tbl_fadd_op # INF + DENORM
        short           fadd_res_snan   - tbl_fadd_op # NORM + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

        short           fadd_res_qnan   - tbl_fadd_op # QNAN + NORM
        short           fadd_res_qnan   - tbl_fadd_op # QNAN + ZERO
        short           fadd_res_qnan   - tbl_fadd_op # QNAN + INF
        short           fadd_res_qnan   - tbl_fadd_op # QNAN + QNAN
        short           fadd_res_qnan   - tbl_fadd_op # QNAN + DENORM
        short           fadd_res_snan   - tbl_fadd_op # QNAN + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

        short           fadd_norm       - tbl_fadd_op # DENORM + NORM
        short           fadd_zero_src   - tbl_fadd_op # DENORM + ZERO
        short           fadd_inf_src    - tbl_fadd_op # DENORM + INF
        short           fadd_res_qnan   - tbl_fadd_op # NORM + QNAN
        short           fadd_norm       - tbl_fadd_op # DENORM + DENORM
        short           fadd_res_snan   - tbl_fadd_op # NORM + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

        short           fadd_res_snan   - tbl_fadd_op # SNAN + NORM
        short           fadd_res_snan   - tbl_fadd_op # SNAN + ZERO
        short           fadd_res_snan   - tbl_fadd_op # SNAN + INF
        short           fadd_res_snan   - tbl_fadd_op # SNAN + QNAN
        short           fadd_res_snan   - tbl_fadd_op # SNAN + DENORM
        short           fadd_res_snan   - tbl_fadd_op # SNAN + SNAN
        short           tbl_fadd_op     - tbl_fadd_op #
        short           tbl_fadd_op     - tbl_fadd_op #

fadd_res_qnan:
        bra.l           res_qnan
fadd_res_snan:
        bra.l           res_snan

#
# both operands are ZEROes
#
fadd_zero_2:
        mov.b           SRC_EX(%a0),%d0         # are the signs opposite
        mov.b           DST_EX(%a1),%d1
        eor.b           %d0,%d1
        bmi.w           fadd_zero_2_chk_rm      # weed out (-ZERO)+(+ZERO)

# the signs are the same. so determine whether they are positive or negative
# and return the appropriately signed zero.
        tst.b           %d0                     # are ZEROes positive or negative?
        bmi.b           fadd_zero_rm            # negative
        fmov.s          &0x00000000,%fp0        # return +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

#
# the ZEROes have opposite signs:
# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
# - -ZERO is returned in the case of RM.
#
fadd_zero_2_chk_rm:
        mov.b           3+L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # extract rnd mode
        cmpi.b          %d1,&rm_mode*0x10       # is rnd mode == RM?
        beq.b           fadd_zero_rm            # yes
        fmov.s          &0x00000000,%fp0        # return +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

fadd_zero_rm:
        fmov.s          &0x80000000,%fp0        # return -ZERO
        mov.b           &neg_bmask+z_bmask,FPSR_CC(%a6) # set NEG/Z
        rts

#
# one operand is a ZERO and the other is a DENORM or NORM. scale
# the DENORM or NORM and jump to the regular fadd routine.
#
fadd_zero_dst:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # scale the operand
        clr.w           FP_SCR1_EX(%a6)
        clr.l           FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)
        bra.w           fadd_zero_entry         # go execute fadd

fadd_zero_src:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)
        bsr.l           scale_to_zero_dst       # scale the operand
        clr.w           FP_SCR0_EX(%a6)
        clr.l           FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)
        bra.w           fadd_zero_entry         # go execute fadd

#
# both operands are INFs. an OPERR will result if the INFs have
# different signs. else, an INF of the same sign is returned
#
fadd_inf_2:
        mov.b           SRC_EX(%a0),%d0         # exclusive or the signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d1,%d0
        bmi.l           res_operr               # weed out (-INF)+(+INF)

# ok, so it's not an OPERR. but, we do have to remember to return the
# src INF since that's where the 881/882 gets the j-bit from...

#
# operands are INF and one of {ZERO, INF, DENORM, NORM}
#
fadd_inf_src:
        fmovm.x         SRC(%a0),&0x80          # return src INF
        tst.b           SRC_EX(%a0)             # is INF positive?
        bpl.b           fadd_inf_done           # yes; we're done
        mov.b           &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
        rts

#
# operands are INF and one of {ZERO, INF, DENORM, NORM}
#
fadd_inf_dst:
        fmovm.x         DST(%a1),&0x80          # return dst INF
        tst.b           DST_EX(%a1)             # is INF positive?
        bpl.b           fadd_inf_done           # yes; we're done
        mov.b           &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
        rts

fadd_inf_done:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set INF
        rts

#########################################################################
# XDEF **************************************************************** #
#       fsub(): emulates the fsub instruction                           #
#       fssub(): emulates the fssub instruction                         #
#       fdsub(): emulates the fdsub instruction                         #
#                                                                       #
# XREF **************************************************************** #
#       addsub_scaler2() - scale the operands so they won't take exc    #
#       ovf_res() - return default overflow result                      #
#       unf_res() - return default underflow result                     #
#       res_qnan() - set QNAN result                                    #
#       res_snan() - set SNAN result                                    #
#       res_operr() - set OPERR result                                  #
#       scale_to_zero_src() - set src operand exponent equal to zero    #
#       scale_to_zero_dst() - set dst operand exponent equal to zero    #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       a1 = pointer to extended precision destination operand          #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms into extended, single, and double precision.                    #
#       Do subtraction after scaling exponents such that exception won't#
# occur. Then, check result exponent to see if exception would have     #
# occurred. If so, return default result and maybe EXOP. Else, insert   #
# the correct result exponent and return. Set FPSR bits as appropriate. #
#                                                                       #
#########################################################################

        global          fssub
fssub:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl prec
        bra.b           fsub

        global          fdsub
fdsub:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl prec

        global          fsub
fsub:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info

        clr.w           %d1
        mov.b           DTAG(%a6),%d1
        lsl.b           &0x3,%d1
        or.b            STAG(%a6),%d1           # combine src tags

        bne.w           fsub_not_norm           # optimize on non-norm input

#
# SUB: norms and denorms
#
fsub_norm:
        bsr.l           addsub_scaler2          # scale exponents

fsub_zero_entry:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fsub.x          FP_SCR0(%a6),%fp0       # execute subtract

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # fetch INEX2, N, Z

        or.l            %d1,USER_FPSR(%a6)      # save exc and ccode bits

        fbeq.w          fsub_zero_exit          # if result zero, end now

        mov.l           %d2,-(%sp)              # save d2

        fmovm.x         &0x01,-(%sp)            # save result to stack

        mov.w           2+L_SCR3(%a6),%d1
        lsr.b           &0x6,%d1

        mov.w           (%sp),%d2               # fetch new exponent
        andi.l          &0x7fff,%d2             # strip sign
        sub.l           %d0,%d2                 # add scale factor

        cmp.l           %d2,(tbl_fsub_ovfl.b,%pc,%d1.w*4) # is it an overflow?
        bge.b           fsub_ovfl               # yes

        cmp.l           %d2,(tbl_fsub_unfl.b,%pc,%d1.w*4) # is it an underflow?
        blt.w           fsub_unfl               # yes
        beq.w           fsub_may_unfl           # maybe; go find out

fsub_normal:
        mov.w           (%sp),%d1
        andi.w          &0x8000,%d1             # keep sign
        or.w            %d2,%d1                 # insert new exponent
        mov.w           %d1,(%sp)               # insert new exponent

        fmovm.x         (%sp)+,&0x80            # return result in fp0

        mov.l           (%sp)+,%d2              # restore d2
        rts

fsub_zero_exit:
#       fmov.s          &0x00000000,%fp0        # return zero in fp0
        rts

tbl_fsub_ovfl:
        long            0x7fff                  # ext ovfl
        long            0x407f                  # sgl ovfl
        long            0x43ff                  # dbl ovfl

tbl_fsub_unfl:
        long            0x0000                  # ext unfl
        long            0x3f81                  # sgl unfl
        long            0x3c01                  # dbl unfl

fsub_ovfl:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fsub_ovfl_ena           # yes

        add.l           &0xc,%sp
fsub_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass prec:rnd
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        mov.l           (%sp)+,%d2              # restore d2
        rts

fsub_ovfl_ena:
        mov.b           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fsub_ovfl_ena_sd        # no

fsub_ovfl_ena_cont:
        mov.w           (%sp),%d1               # fetch {sgn,exp}
        andi.w          &0x8000,%d1             # keep sign
        subi.l          &0x6000,%d2             # subtract new bias
        andi.w          &0x7fff,%d2             # clear top bit
        or.w            %d2,%d1                 # concat sign,exp
        mov.w           %d1,(%sp)               # insert new exponent

        fmovm.x         (%sp)+,&0x40            # return EXOP in fp1
        bra.b           fsub_ovfl_dis

fsub_ovfl_ena_sd:
        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # clear rnd prec
        fmov.l          %d1,%fpcr               # set FPCR

        fsub.x          FP_SCR0(%a6),%fp0       # execute subtract

        fmov.l          &0x0,%fpcr              # clear FPCR

        add.l           &0xc,%sp
        fmovm.x         &0x01,-(%sp)
        bra.b           fsub_ovfl_ena_cont

fsub_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        add.l           &0xc,%sp

        fmovm.x         FP_SCR1(%a6),&0x80      # load dst op

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsub.x          FP_SCR0(%a6),%fp0       # execute subtract

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save status

        or.l            %d1,USER_FPSR(%a6)

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fsub_unfl_ena           # yes

fsub_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # 'Z' may have been set
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        mov.l           (%sp)+,%d2              # restore d2
        rts

fsub_unfl_ena:
        fmovm.x         FP_SCR1(%a6),&0x40

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # is precision extended?
        bne.b           fsub_unfl_ena_sd        # no

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

fsub_unfl_ena_cont:
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsub.x          FP_SCR0(%a6),%fp1       # execute subtract

        fmov.l          &0x0,%fpcr              # clear FPCR

        fmovm.x         &0x40,FP_SCR0(%a6)      # store result to stack
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        addi.l          &0x6000,%d1             # subtract new bias
        andi.w          &0x7fff,%d1             # clear top bit
        or.w            %d2,%d1                 # concat sgn,exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        bra.w           fsub_unfl_dis

fsub_unfl_ena_sd:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # clear rnd prec
        fmov.l          %d1,%fpcr               # set FPCR

        bra.b           fsub_unfl_ena_cont

#
# result is equal to the smallest normalized number in the selected precision
# if the precision is extended, this result could not have come from an
# underflow that rounded up.
#
fsub_may_unfl:
        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # fetch rnd prec
        beq.w           fsub_normal             # yes; no underflow occurred

        mov.l           0x4(%sp),%d1
        cmpi.l          %d1,&0x80000000         # is hi(man) = 0x80000000?
        bne.w           fsub_normal             # no; no underflow occurred

        tst.l           0x8(%sp)                # is lo(man) = 0x0?
        bne.w           fsub_normal             # no; no underflow occurred

        btst            &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
        beq.w           fsub_normal             # no; no underflow occurred

#
# ok, so now the result has a exponent equal to the smallest normalized
# exponent for the selected precision. also, the mantissa is equal to
# 0x8000000000000000 and this mantissa is the result of rounding non-zero
# g,r,s.
# now, we must determine whether the pre-rounded result was an underflow
# rounded "up" or a normalized number rounded "down".
# so, we do this be re-executing the add using RZ as the rounding mode and
# seeing if the new result is smaller or equal to the current result.
#
        fmovm.x         FP_SCR1(%a6),&0x40      # load dst op into fp1

        mov.l           L_SCR3(%a6),%d1
        andi.b          &0xc0,%d1               # keep rnd prec
        ori.b           &rz_mode*0x10,%d1       # insert rnd mode
        fmov.l          %d1,%fpcr               # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsub.x          FP_SCR0(%a6),%fp1       # execute subtract

        fmov.l          &0x0,%fpcr              # clear FPCR

        fabs.x          %fp0                    # compare absolute values
        fabs.x          %fp1
        fcmp.x          %fp0,%fp1               # is first result > second?

        fbgt.w          fsub_unfl               # yes; it's an underflow
        bra.w           fsub_normal             # no; it's not an underflow

##########################################################################

#
# Sub: inputs are not both normalized; what are they?
#
fsub_not_norm:
        mov.w           (tbl_fsub_op.b,%pc,%d1.w*2),%d1
        jmp             (tbl_fsub_op.b,%pc,%d1.w*1)

        swbeg           &48
tbl_fsub_op:
        short           fsub_norm       - tbl_fsub_op # NORM - NORM
        short           fsub_zero_src   - tbl_fsub_op # NORM - ZERO
        short           fsub_inf_src    - tbl_fsub_op # NORM - INF
        short           fsub_res_qnan   - tbl_fsub_op # NORM - QNAN
        short           fsub_norm       - tbl_fsub_op # NORM - DENORM
        short           fsub_res_snan   - tbl_fsub_op # NORM - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

        short           fsub_zero_dst   - tbl_fsub_op # ZERO - NORM
        short           fsub_zero_2     - tbl_fsub_op # ZERO - ZERO
        short           fsub_inf_src    - tbl_fsub_op # ZERO - INF
        short           fsub_res_qnan   - tbl_fsub_op # NORM - QNAN
        short           fsub_zero_dst   - tbl_fsub_op # ZERO - DENORM
        short           fsub_res_snan   - tbl_fsub_op # NORM - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

        short           fsub_inf_dst    - tbl_fsub_op # INF - NORM
        short           fsub_inf_dst    - tbl_fsub_op # INF - ZERO
        short           fsub_inf_2      - tbl_fsub_op # INF - INF
        short           fsub_res_qnan   - tbl_fsub_op # NORM - QNAN
        short           fsub_inf_dst    - tbl_fsub_op # INF - DENORM
        short           fsub_res_snan   - tbl_fsub_op # NORM - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

        short           fsub_res_qnan   - tbl_fsub_op # QNAN - NORM
        short           fsub_res_qnan   - tbl_fsub_op # QNAN - ZERO
        short           fsub_res_qnan   - tbl_fsub_op # QNAN - INF
        short           fsub_res_qnan   - tbl_fsub_op # QNAN - QNAN
        short           fsub_res_qnan   - tbl_fsub_op # QNAN - DENORM
        short           fsub_res_snan   - tbl_fsub_op # QNAN - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

        short           fsub_norm       - tbl_fsub_op # DENORM - NORM
        short           fsub_zero_src   - tbl_fsub_op # DENORM - ZERO
        short           fsub_inf_src    - tbl_fsub_op # DENORM - INF
        short           fsub_res_qnan   - tbl_fsub_op # NORM - QNAN
        short           fsub_norm       - tbl_fsub_op # DENORM - DENORM
        short           fsub_res_snan   - tbl_fsub_op # NORM - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

        short           fsub_res_snan   - tbl_fsub_op # SNAN - NORM
        short           fsub_res_snan   - tbl_fsub_op # SNAN - ZERO
        short           fsub_res_snan   - tbl_fsub_op # SNAN - INF
        short           fsub_res_snan   - tbl_fsub_op # SNAN - QNAN
        short           fsub_res_snan   - tbl_fsub_op # SNAN - DENORM
        short           fsub_res_snan   - tbl_fsub_op # SNAN - SNAN
        short           tbl_fsub_op     - tbl_fsub_op #
        short           tbl_fsub_op     - tbl_fsub_op #

fsub_res_qnan:
        bra.l           res_qnan
fsub_res_snan:
        bra.l           res_snan

#
# both operands are ZEROes
#
fsub_zero_2:
        mov.b           SRC_EX(%a0),%d0
        mov.b           DST_EX(%a1),%d1
        eor.b           %d1,%d0
        bpl.b           fsub_zero_2_chk_rm

# the signs are opposite, so, return a ZERO w/ the sign of the dst ZERO
        tst.b           %d0                     # is dst negative?
        bmi.b           fsub_zero_2_rm          # yes
        fmov.s          &0x00000000,%fp0        # no; return +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

#
# the ZEROes have the same signs:
# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
# - -ZERO is returned in the case of RM.
#
fsub_zero_2_chk_rm:
        mov.b           3+L_SCR3(%a6),%d1
        andi.b          &0x30,%d1               # extract rnd mode
        cmpi.b          %d1,&rm_mode*0x10       # is rnd mode = RM?
        beq.b           fsub_zero_2_rm          # yes
        fmov.s          &0x00000000,%fp0        # no; return +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set Z
        rts

fsub_zero_2_rm:
        fmov.s          &0x80000000,%fp0        # return -ZERO
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/NEG
        rts

#
# one operand is a ZERO and the other is a DENORM or a NORM.
# scale the DENORM or NORM and jump to the regular fsub routine.
#
fsub_zero_dst:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        bsr.l           scale_to_zero_src       # scale the operand
        clr.w           FP_SCR1_EX(%a6)
        clr.l           FP_SCR1_HI(%a6)
        clr.l           FP_SCR1_LO(%a6)
        bra.w           fsub_zero_entry         # go execute fsub

fsub_zero_src:
        mov.w           DST_EX(%a1),FP_SCR1_EX(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)
        bsr.l           scale_to_zero_dst       # scale the operand
        clr.w           FP_SCR0_EX(%a6)
        clr.l           FP_SCR0_HI(%a6)
        clr.l           FP_SCR0_LO(%a6)
        bra.w           fsub_zero_entry         # go execute fsub

#
# both operands are INFs. an OPERR will result if the INFs have the
# same signs. else,
#
fsub_inf_2:
        mov.b           SRC_EX(%a0),%d0         # exclusive or the signs
        mov.b           DST_EX(%a1),%d1
        eor.b           %d1,%d0
        bpl.l           res_operr               # weed out (-INF)+(+INF)

# ok, so it's not an OPERR. but we do have to remember to return
# the src INF since that's where the 881/882 gets the j-bit.

fsub_inf_src:
        fmovm.x         SRC(%a0),&0x80          # return src INF
        fneg.x          %fp0                    # invert sign
        fbge.w          fsub_inf_done           # sign is now positive
        mov.b           &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
        rts

fsub_inf_dst:
        fmovm.x         DST(%a1),&0x80          # return dst INF
        tst.b           DST_EX(%a1)             # is INF negative?
        bpl.b           fsub_inf_done           # no
        mov.b           &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG
        rts

fsub_inf_done:
        mov.b           &inf_bmask,FPSR_CC(%a6) # set INF
        rts

#########################################################################
# XDEF **************************************************************** #
#       fsqrt(): emulates the fsqrt instruction                         #
#       fssqrt(): emulates the fssqrt instruction                       #
#       fdsqrt(): emulates the fdsqrt instruction                       #
#                                                                       #
# XREF **************************************************************** #
#       scale_sqrt() - scale the source operand                         #
#       unf_res() - return default underflow result                     #
#       ovf_res() - return default overflow result                      #
#       res_qnan_1op() - return QNAN result                             #
#       res_snan_1op() - return SNAN result                             #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0  rnd prec,mode                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = result                                                    #
#       fp1 = EXOP (if exception occurred)                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Handle NANs, infinities, and zeroes as special cases. Divide    #
# norms/denorms into ext/sgl/dbl precision.                             #
#       For norms/denorms, scale the exponents such that a sqrt         #
# instruction won't cause an exception. Use the regular fsqrt to        #
# compute a result. Check if the regular operands would have taken      #
# an exception. If so, return the default overflow/underflow result     #
# and return the EXOP if exceptions are enabled. Else, scale the        #
# result operand to the proper exponent.                                #
#                                                                       #
#########################################################################

        global          fssqrt
fssqrt:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl precision
        bra.b           fsqrt

        global          fdsqrt
fdsqrt:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl precision

        global          fsqrt
fsqrt:
        mov.l           %d0,L_SCR3(%a6)         # store rnd info
        clr.w           %d1
        mov.b           STAG(%a6),%d1
        bne.w           fsqrt_not_norm          # optimize on non-norm input

#
# SQUARE ROOT: norms and denorms ONLY!
#
fsqrt_norm:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.l           res_operr               # yes

        andi.b          &0xc0,%d0               # is precision extended?
        bne.b           fsqrt_not_ext           # no; go handle sgl or dbl

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsqrt.x         (%a0),%fp0              # execute square root

        fmov.l          %fpsr,%d1
        or.l            %d1,USER_FPSR(%a6)      # set N,INEX

        rts

fsqrt_denorm:
        tst.b           SRC_EX(%a0)             # is operand negative?
        bmi.l           res_operr               # yes

        andi.b          &0xc0,%d0               # is precision extended?
        bne.b           fsqrt_not_ext           # no; go handle sgl or dbl

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_sqrt              # calculate scale factor

        bra.w           fsqrt_sd_normal

#
# operand is either single or double
#
fsqrt_not_ext:
        cmpi.b          %d0,&s_mode*0x10        # separate sgl/dbl prec
        bne.w           fsqrt_dbl

#
# operand is to be rounded to single precision
#
fsqrt_sgl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_sqrt              # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3f81      # will move in underflow?
        beq.w           fsqrt_sd_may_unfl
        bgt.w           fsqrt_sd_unfl           # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x407f      # will move in overflow?
        beq.w           fsqrt_sd_may_ovfl       # maybe; go check
        blt.w           fsqrt_sd_ovfl           # yes; go handle overflow

#
# operand will NOT overflow or underflow when moved in to the fp reg file
#
fsqrt_sd_normal:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fsqrt.x         FP_SCR0(%a6),%fp0       # perform absolute

        fmov.l          %fpsr,%d1               # save FPSR
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fsqrt_sd_normal_exit:
        mov.l           %d2,-(%sp)              # save d2
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result
        mov.w           FP_SCR0_EX(%a6),%d1     # load sgn,exp
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        sub.l           %d0,%d1                 # add scale factor
        andi.w          &0x8000,%d2             # keep old sign
        or.w            %d1,%d2                 # concat old sign,new exp
        mov.w           %d2,FP_SCR0_EX(%a6)     # insert new exponent
        mov.l           (%sp)+,%d2              # restore d2
        fmovm.x         FP_SCR0(%a6),&0x80      # return result in fp0
        rts

#
# operand is to be rounded to double precision
#
fsqrt_dbl:
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        bsr.l           scale_sqrt              # calculate scale factor

        cmpi.l          %d0,&0x3fff-0x3c01      # will move in underflow?
        beq.w           fsqrt_sd_may_unfl
        bgt.b           fsqrt_sd_unfl           # yes; go handle underflow
        cmpi.l          %d0,&0x3fff-0x43ff      # will move in overflow?
        beq.w           fsqrt_sd_may_ovfl       # maybe; go check
        blt.w           fsqrt_sd_ovfl           # yes; go handle overflow
        bra.w           fsqrt_sd_normal         # no; ho handle normalized op

# we're on the line here and the distinguising characteristic is whether
# the exponent is 3fff or 3ffe. if it's 3ffe, then it's a safe number
# elsewise fall through to underflow.
fsqrt_sd_may_unfl:
        btst            &0x0,1+FP_SCR0_EX(%a6)  # is exponent 0x3fff?
        bne.w           fsqrt_sd_normal         # yes, so no underflow

#
# operand WILL underflow when moved in to the fp register file
#
fsqrt_sd_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit

        fmov.l          &rz_mode*0x10,%fpcr     # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fsqrt.x         FP_SCR0(%a6),%fp0       # execute square root

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

# if underflow or inexact is enabled, go calculate EXOP first.
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0b,%d1               # is UNFL or INEX enabled?
        bne.b           fsqrt_sd_unfl_ena       # yes

fsqrt_sd_unfl_dis:
        fmovm.x         &0x80,FP_SCR0(%a6)      # store out result

        lea             FP_SCR0(%a6),%a0        # pass: result addr
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set possible 'Z' ccode
        fmovm.x         FP_SCR0(%a6),&0x80      # return default result in fp0
        rts

#
# operand will underflow AND underflow is enabled.
# therefore, we must return the result rounded to extended precision.
#
fsqrt_sd_unfl_ena:
        mov.l           FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
        mov.l           FP_SCR0_LO(%a6),FP_SCR1_LO(%a6)
        mov.w           FP_SCR0_EX(%a6),%d1     # load current exponent

        mov.l           %d2,-(%sp)              # save d2
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # subtract scale factor
        addi.l          &0x6000,%d1             # add new bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat new sign,new exp
        mov.w           %d1,FP_SCR1_EX(%a6)     # insert new exp
        fmovm.x         FP_SCR1(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fsqrt_sd_unfl_dis

#
# operand WILL overflow.
#
fsqrt_sd_ovfl:
        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fsqrt.x         FP_SCR0(%a6),%fp0       # perform square root

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save FPSR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

fsqrt_sd_ovfl_tst:
        or.l            &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x13,%d1               # is OVFL or INEX enabled?
        bne.b           fsqrt_sd_ovfl_ena       # yes

#
# OVFL is not enabled; therefore, we must create the default result by
# calling ovf_res().
#
fsqrt_sd_ovfl_dis:
        btst            &neg_bit,FPSR_CC(%a6)   # is result negative?
        sne             %d1                     # set sign param accordingly
        mov.l           L_SCR3(%a6),%d0         # pass: prec,mode
        bsr.l           ovf_res                 # calculate default result
        or.b            %d0,FPSR_CC(%a6)        # set INF,N if applicable
        fmovm.x         (%a0),&0x80             # return default result in fp0
        rts

#
# OVFL is enabled.
# the INEX2 bit has already been updated by the round to the correct precision.
# now, round to extended(and don't alter the FPSR).
#
fsqrt_sd_ovfl_ena:
        mov.l           %d2,-(%sp)              # save d2
        mov.w           FP_SCR0_EX(%a6),%d1     # fetch {sgn,exp}
        mov.l           %d1,%d2                 # make a copy
        andi.l          &0x7fff,%d1             # strip sign
        andi.w          &0x8000,%d2             # keep old sign
        sub.l           %d0,%d1                 # add scale factor
        subi.l          &0x6000,%d1             # subtract bias
        andi.w          &0x7fff,%d1
        or.w            %d2,%d1                 # concat sign,exp
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        mov.l           (%sp)+,%d2              # restore d2
        bra.b           fsqrt_sd_ovfl_dis

#
# the move in MAY underflow. so...
#
fsqrt_sd_may_ovfl:
        btst            &0x0,1+FP_SCR0_EX(%a6)  # is exponent 0x3fff?
        bne.w           fsqrt_sd_ovfl           # yes, so overflow

        fmov.l          &0x0,%fpsr              # clear FPSR
        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fsqrt.x         FP_SCR0(%a6),%fp0       # perform absolute

        fmov.l          %fpsr,%d1               # save status
        fmov.l          &0x0,%fpcr              # clear FPCR

        or.l            %d1,USER_FPSR(%a6)      # save INEX2,N

        fmov.x          %fp0,%fp1               # make a copy of result
        fcmp.b          %fp1,&0x1               # is |result| >= 1.b?
        fbge.w          fsqrt_sd_ovfl_tst       # yes; overflow has occurred

# no, it didn't overflow; we have correct result
        bra.w           fsqrt_sd_normal_exit

##########################################################################

#
# input is not normalized; what is it?
#
fsqrt_not_norm:
        cmpi.b          %d1,&DENORM             # weed out DENORM
        beq.w           fsqrt_denorm
        cmpi.b          %d1,&ZERO               # weed out ZERO
        beq.b           fsqrt_zero
        cmpi.b          %d1,&INF                # weed out INF
        beq.b           fsqrt_inf
        cmpi.b          %d1,&SNAN               # weed out SNAN
        beq.l           res_snan_1op
        bra.l           res_qnan_1op

#
#       fsqrt(+0) = +0
#       fsqrt(-0) = -0
#       fsqrt(+INF) = +INF
#       fsqrt(-INF) = OPERR
#
fsqrt_zero:
        tst.b           SRC_EX(%a0)             # is ZERO positive or negative?
        bmi.b           fsqrt_zero_m            # negative
fsqrt_zero_p:
        fmov.s          &0x00000000,%fp0        # return +ZERO
        mov.b           &z_bmask,FPSR_CC(%a6)   # set 'Z' ccode bit
        rts
fsqrt_zero_m:
        fmov.s          &0x80000000,%fp0        # return -ZERO
        mov.b           &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits
        rts

fsqrt_inf:
        tst.b           SRC_EX(%a0)             # is INF positive or negative?
        bmi.l           res_operr               # negative
fsqrt_inf_p:
        fmovm.x         SRC(%a0),&0x80          # return +INF in fp0
        mov.b           &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit
        rts

##########################################################################

#########################################################################
# XDEF **************************************************************** #
#       addsub_scaler2(): scale inputs to fadd/fsub such that no        #
#                         OVFL/UNFL exceptions will result              #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize mantissa after adjusting exponent            #
#                                                                       #
# INPUT *************************************************************** #
#       FP_SRC(a6) = fp op1(src)                                        #
#       FP_DST(a6) = fp op2(dst)                                        #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SRC(a6) = fp op1 scaled(src)                                 #
#       FP_DST(a6) = fp op2 scaled(dst)                                 #
#       d0         = scale amount                                       #
#                                                                       #
# ALGORITHM *********************************************************** #
#       If the DST exponent is > the SRC exponent, set the DST exponent #
# equal to 0x3fff and scale the SRC exponent by the value that the      #
# DST exponent was scaled by. If the SRC exponent is greater or equal,  #
# do the opposite. Return this scale factor in d0.                      #
#       If the two exponents differ by > the number of mantissa bits    #
# plus two, then set the smallest exponent to a very small value as a   #
# quick shortcut.                                                       #
#                                                                       #
#########################################################################

        global          addsub_scaler2
addsub_scaler2:
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           DST_HI(%a1),FP_SCR1_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.l           DST_LO(%a1),FP_SCR1_LO(%a6)
        mov.w           SRC_EX(%a0),%d0
        mov.w           DST_EX(%a1),%d1
        mov.w           %d0,FP_SCR0_EX(%a6)
        mov.w           %d1,FP_SCR1_EX(%a6)

        andi.w          &0x7fff,%d0
        andi.w          &0x7fff,%d1
        mov.w           %d0,L_SCR1(%a6)         # store src exponent
        mov.w           %d1,2+L_SCR1(%a6)       # store dst exponent

        cmp.w           %d0, %d1                # is src exp >= dst exp?
        bge.l           src_exp_ge2

# dst exp is >  src exp; scale dst to exp = 0x3fff
dst_exp_gt2:
        bsr.l           scale_to_zero_dst
        mov.l           %d0,-(%sp)              # save scale factor

        cmpi.b          STAG(%a6),&DENORM       # is dst denormalized?
        bne.b           cmpexp12

        lea             FP_SCR0(%a6),%a0
        bsr.l           norm                    # normalize the denorm; result is new exp
        neg.w           %d0                     # new exp = -(shft val)
        mov.w           %d0,L_SCR1(%a6)         # inset new exp

cmpexp12:
        mov.w           2+L_SCR1(%a6),%d0
        subi.w          &mantissalen+2,%d0      # subtract mantissalen+2 from larger exp

        cmp.w           %d0,L_SCR1(%a6)         # is difference >= len(mantissa)+2?
        bge.b           quick_scale12

        mov.w           L_SCR1(%a6),%d0
        add.w           0x2(%sp),%d0            # scale src exponent by scale factor
        mov.w           FP_SCR0_EX(%a6),%d1
        and.w           &0x8000,%d1
        or.w            %d1,%d0                 # concat {sgn,new exp}
        mov.w           %d0,FP_SCR0_EX(%a6)     # insert new dst exponent

        mov.l           (%sp)+,%d0              # return SCALE factor
        rts

quick_scale12:
        andi.w          &0x8000,FP_SCR0_EX(%a6) # zero src exponent
        bset            &0x0,1+FP_SCR0_EX(%a6)  # set exp = 1

        mov.l           (%sp)+,%d0              # return SCALE factor
        rts

# src exp is >= dst exp; scale src to exp = 0x3fff
src_exp_ge2:
        bsr.l           scale_to_zero_src
        mov.l           %d0,-(%sp)              # save scale factor

        cmpi.b          DTAG(%a6),&DENORM       # is dst denormalized?
        bne.b           cmpexp22
        lea             FP_SCR1(%a6),%a0
        bsr.l           norm                    # normalize the denorm; result is new exp
        neg.w           %d0                     # new exp = -(shft val)
        mov.w           %d0,2+L_SCR1(%a6)       # inset new exp

cmpexp22:
        mov.w           L_SCR1(%a6),%d0
        subi.w          &mantissalen+2,%d0      # subtract mantissalen+2 from larger exp

        cmp.w           %d0,2+L_SCR1(%a6)       # is difference >= len(mantissa)+2?
        bge.b           quick_scale22

        mov.w           2+L_SCR1(%a6),%d0
        add.w           0x2(%sp),%d0            # scale dst exponent by scale factor
        mov.w           FP_SCR1_EX(%a6),%d1
        andi.w          &0x8000,%d1
        or.w            %d1,%d0                 # concat {sgn,new exp}
        mov.w           %d0,FP_SCR1_EX(%a6)     # insert new dst exponent

        mov.l           (%sp)+,%d0              # return SCALE factor
        rts

quick_scale22:
        andi.w          &0x8000,FP_SCR1_EX(%a6) # zero dst exponent
        bset            &0x0,1+FP_SCR1_EX(%a6)  # set exp = 1

        mov.l           (%sp)+,%d0              # return SCALE factor
        rts

##########################################################################

#########################################################################
# XDEF **************************************************************** #
#       scale_to_zero_src(): scale the exponent of extended precision   #
#                            value at FP_SCR0(a6).                      #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize the mantissa if the operand was a DENORM     #
#                                                                       #
# INPUT *************************************************************** #
#       FP_SCR0(a6) = extended precision operand to be scaled           #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SCR0(a6) = scaled extended precision operand                 #
#       d0          = scale value                                       #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Set the exponent of the input operand to 0x3fff. Save the value #
# of the difference between the original and new exponent. Then,        #
# normalize the operand if it was a DENORM. Add this normalization      #
# value to the previous value. Return the result.                       #
#                                                                       #
#########################################################################

        global          scale_to_zero_src
scale_to_zero_src:
        mov.w           FP_SCR0_EX(%a6),%d1     # extract operand's {sgn,exp}
        mov.w           %d1,%d0                 # make a copy

        andi.l          &0x7fff,%d1             # extract operand's exponent

        andi.w          &0x8000,%d0             # extract operand's sgn
        or.w            &0x3fff,%d0             # insert new operand's exponent(=0)

        mov.w           %d0,FP_SCR0_EX(%a6)     # insert biased exponent

        cmpi.b          STAG(%a6),&DENORM       # is operand normalized?
        beq.b           stzs_denorm             # normalize the DENORM

stzs_norm:
        mov.l           &0x3fff,%d0
        sub.l           %d1,%d0                 # scale = BIAS + (-exp)

        rts

stzs_denorm:
        lea             FP_SCR0(%a6),%a0        # pass ptr to src op
        bsr.l           norm                    # normalize denorm
        neg.l           %d0                     # new exponent = -(shft val)
        mov.l           %d0,%d1                 # prepare for op_norm call
        bra.b           stzs_norm               # finish scaling

###

#########################################################################
# XDEF **************************************************************** #
#       scale_sqrt(): scale the input operand exponent so a subsequent  #
#                     fsqrt operation won't take an exception.          #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize the mantissa if the operand was a DENORM     #
#                                                                       #
# INPUT *************************************************************** #
#       FP_SCR0(a6) = extended precision operand to be scaled           #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SCR0(a6) = scaled extended precision operand                 #
#       d0          = scale value                                       #
#                                                                       #
# ALGORITHM *********************************************************** #
#       If the input operand is a DENORM, normalize it.                 #
#       If the exponent of the input operand is even, set the exponent  #
# to 0x3ffe and return a scale factor of "(exp-0x3ffe)/2". If the       #
# exponent of the input operand is off, set the exponent to ox3fff and  #
# return a scale factor of "(exp-0x3fff)/2".                            #
#                                                                       #
#########################################################################

        global          scale_sqrt
scale_sqrt:
        cmpi.b          STAG(%a6),&DENORM       # is operand normalized?
        beq.b           ss_denorm               # normalize the DENORM

        mov.w           FP_SCR0_EX(%a6),%d1     # extract operand's {sgn,exp}
        andi.l          &0x7fff,%d1             # extract operand's exponent

        andi.w          &0x8000,FP_SCR0_EX(%a6) # extract operand's sgn

        btst            &0x0,%d1                # is exp even or odd?
        beq.b           ss_norm_even

        ori.w           &0x3fff,FP_SCR0_EX(%a6) # insert new operand's exponent(=0)

        mov.l           &0x3fff,%d0
        sub.l           %d1,%d0                 # scale = BIAS + (-exp)
        asr.l           &0x1,%d0                # divide scale factor by 2
        rts

ss_norm_even:
        ori.w           &0x3ffe,FP_SCR0_EX(%a6) # insert new operand's exponent(=0)

        mov.l           &0x3ffe,%d0
        sub.l           %d1,%d0                 # scale = BIAS + (-exp)
        asr.l           &0x1,%d0                # divide scale factor by 2
        rts

ss_denorm:
        lea             FP_SCR0(%a6),%a0        # pass ptr to src op
        bsr.l           norm                    # normalize denorm

        btst            &0x0,%d0                # is exp even or odd?
        beq.b           ss_denorm_even

        ori.w           &0x3fff,FP_SCR0_EX(%a6) # insert new operand's exponent(=0)

        add.l           &0x3fff,%d0
        asr.l           &0x1,%d0                # divide scale factor by 2
        rts

ss_denorm_even:
        ori.w           &0x3ffe,FP_SCR0_EX(%a6) # insert new operand's exponent(=0)

        add.l           &0x3ffe,%d0
        asr.l           &0x1,%d0                # divide scale factor by 2
        rts

###

#########################################################################
# XDEF **************************************************************** #
#       scale_to_zero_dst(): scale the exponent of extended precision   #
#                            value at FP_SCR1(a6).                      #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize the mantissa if the operand was a DENORM     #
#                                                                       #
# INPUT *************************************************************** #
#       FP_SCR1(a6) = extended precision operand to be scaled           #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SCR1(a6) = scaled extended precision operand                 #
#       d0          = scale value                                       #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Set the exponent of the input operand to 0x3fff. Save the value #
# of the difference between the original and new exponent. Then,        #
# normalize the operand if it was a DENORM. Add this normalization      #
# value to the previous value. Return the result.                       #
#                                                                       #
#########################################################################

        global          scale_to_zero_dst
scale_to_zero_dst:
        mov.w           FP_SCR1_EX(%a6),%d1     # extract operand's {sgn,exp}
        mov.w           %d1,%d0                 # make a copy

        andi.l          &0x7fff,%d1             # extract operand's exponent

        andi.w          &0x8000,%d0             # extract operand's sgn
        or.w            &0x3fff,%d0             # insert new operand's exponent(=0)

        mov.w           %d0,FP_SCR1_EX(%a6)     # insert biased exponent

        cmpi.b          DTAG(%a6),&DENORM       # is operand normalized?
        beq.b           stzd_denorm             # normalize the DENORM

stzd_norm:
        mov.l           &0x3fff,%d0
        sub.l           %d1,%d0                 # scale = BIAS + (-exp)
        rts

stzd_denorm:
        lea             FP_SCR1(%a6),%a0        # pass ptr to dst op
        bsr.l           norm                    # normalize denorm
        neg.l           %d0                     # new exponent = -(shft val)
        mov.l           %d0,%d1                 # prepare for op_norm call
        bra.b           stzd_norm               # finish scaling

##########################################################################

#########################################################################
# XDEF **************************************************************** #
#       res_qnan(): return default result w/ QNAN operand for dyadic    #
#       res_snan(): return default result w/ SNAN operand for dyadic    #
#       res_qnan_1op(): return dflt result w/ QNAN operand for monadic  #
#       res_snan_1op(): return dflt result w/ SNAN operand for monadic  #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       FP_SRC(a6) = pointer to extended precision src operand          #
#       FP_DST(a6) = pointer to extended precision dst operand          #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = default result                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       If either operand (but not both operands) of an operation is a  #
# nonsignalling NAN, then that NAN is returned as the result. If both   #
# operands are nonsignalling NANs, then the destination operand         #
# nonsignalling NAN is returned as the result.                          #
#       If either operand to an operation is a signalling NAN (SNAN),   #
# then, the SNAN bit is set in the FPSR EXC byte. If the SNAN trap      #
# enable bit is set in the FPCR, then the trap is taken and the         #
# destination is not modified. If the SNAN trap enable bit is not set,  #
# then the SNAN is converted to a nonsignalling NAN (by setting the     #
# SNAN bit in the operand to one), and the operation continues as       #
# described in the preceding paragraph, for nonsignalling NANs.         #
#       Make sure the appropriate FPSR bits are set before exiting.     #
#                                                                       #
#########################################################################

        global          res_qnan
        global          res_snan
res_qnan:
res_snan:
        cmp.b           DTAG(%a6), &SNAN        # is the dst an SNAN?
        beq.b           dst_snan2
        cmp.b           DTAG(%a6), &QNAN        # is the dst a  QNAN?
        beq.b           dst_qnan2
src_nan:
        cmp.b           STAG(%a6), &QNAN
        beq.b           src_qnan2
        global          res_snan_1op
res_snan_1op:
src_snan2:
        bset            &0x6, FP_SRC_HI(%a6)    # set SNAN bit
        or.l            &nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
        lea             FP_SRC(%a6), %a0
        bra.b           nan_comp
        global          res_qnan_1op
res_qnan_1op:
src_qnan2:
        or.l            &nan_mask, USER_FPSR(%a6)
        lea             FP_SRC(%a6), %a0
        bra.b           nan_comp
dst_snan2:
        or.l            &nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6)
        bset            &0x6, FP_DST_HI(%a6)    # set SNAN bit
        lea             FP_DST(%a6), %a0
        bra.b           nan_comp
dst_qnan2:
        lea             FP_DST(%a6), %a0
        cmp.b           STAG(%a6), &SNAN
        bne             nan_done
        or.l            &aiop_mask+snan_mask, USER_FPSR(%a6)
nan_done:
        or.l            &nan_mask, USER_FPSR(%a6)
nan_comp:
        btst            &0x7, FTEMP_EX(%a0)     # is NAN neg?
        beq.b           nan_not_neg
        or.l            &neg_mask, USER_FPSR(%a6)
nan_not_neg:
        fmovm.x         (%a0), &0x80
        rts

#########################################################################
# XDEF **************************************************************** #
#       res_operr(): return default result during operand error         #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = default operand error result                              #
#                                                                       #
# ALGORITHM *********************************************************** #
#       An nonsignalling NAN is returned as the default result when     #
# an operand error occurs for the following cases:                      #
#                                                                       #
#       Multiply: (Infinity x Zero)                                     #
#       Divide  : (Zero / Zero) || (Infinity / Infinity)                #
#                                                                       #
#########################################################################

        global          res_operr
res_operr:
        or.l            &nan_mask+operr_mask+aiop_mask, USER_FPSR(%a6)
        fmovm.x         nan_return(%pc), &0x80
        rts

nan_return:
        long            0x7fff0000, 0xffffffff, 0xffffffff

#########################################################################
# fdbcc(): routine to emulate the fdbcc instruction                     #
#                                                                       #
# XDEF **************************************************************** #
#       _fdbcc()                                                        #
#                                                                       #
# XREF **************************************************************** #
#       fetch_dreg() - fetch Dn value                                   #
#       store_dreg_l() - store updated Dn value                         #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = displacement                                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       none                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This routine checks which conditional predicate is specified by #
# the stacked fdbcc instruction opcode and then branches to a routine   #
# for that predicate. The corresponding fbcc instruction is then used   #
# to see whether the condition (specified by the stacked FPSR) is true  #
# or false.                                                             #
#       If a BSUN exception should be indicated, the BSUN and ABSUN     #
# bits are set in the stacked FPSR. If the BSUN exception is enabled,   #
# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an   #
# enabled BSUN should not be flagged and the predicate is true, then    #
# Dn is fetched and decremented by one. If Dn is not equal to -1, add   #
# the displacement value to the stacked PC so that when an "rte" is     #
# finally executed, the branch occurs.                                  #
#                                                                       #
#########################################################################
        global          _fdbcc
_fdbcc:
        mov.l           %d0,L_SCR1(%a6)         # save displacement

        mov.w           EXC_CMDREG(%a6),%d0     # fetch predicate

        clr.l           %d1                     # clear scratch reg
        mov.b           FPSR_CC(%a6),%d1        # fetch fp ccodes
        ror.l           &0x8,%d1                # rotate to top byte
        fmov.l          %d1,%fpsr               # insert into FPSR

        mov.w           (tbl_fdbcc.b,%pc,%d0.w*2),%d1 # load table
        jmp             (tbl_fdbcc.b,%pc,%d1.w) # jump to fdbcc routine

tbl_fdbcc:
        short           fdbcc_f         -       tbl_fdbcc       # 00
        short           fdbcc_eq        -       tbl_fdbcc       # 01
        short           fdbcc_ogt       -       tbl_fdbcc       # 02
        short           fdbcc_oge       -       tbl_fdbcc       # 03
        short           fdbcc_olt       -       tbl_fdbcc       # 04
        short           fdbcc_ole       -       tbl_fdbcc       # 05
        short           fdbcc_ogl       -       tbl_fdbcc       # 06
        short           fdbcc_or        -       tbl_fdbcc       # 07
        short           fdbcc_un        -       tbl_fdbcc       # 08
        short           fdbcc_ueq       -       tbl_fdbcc       # 09
        short           fdbcc_ugt       -       tbl_fdbcc       # 10
        short           fdbcc_uge       -       tbl_fdbcc       # 11
        short           fdbcc_ult       -       tbl_fdbcc       # 12
        short           fdbcc_ule       -       tbl_fdbcc       # 13
        short           fdbcc_neq       -       tbl_fdbcc       # 14
        short           fdbcc_t         -       tbl_fdbcc       # 15
        short           fdbcc_sf        -       tbl_fdbcc       # 16
        short           fdbcc_seq       -       tbl_fdbcc       # 17
        short           fdbcc_gt        -       tbl_fdbcc       # 18
        short           fdbcc_ge        -       tbl_fdbcc       # 19
        short           fdbcc_lt        -       tbl_fdbcc       # 20
        short           fdbcc_le        -       tbl_fdbcc       # 21
        short           fdbcc_gl        -       tbl_fdbcc       # 22
        short           fdbcc_gle       -       tbl_fdbcc       # 23
        short           fdbcc_ngle      -       tbl_fdbcc       # 24
        short           fdbcc_ngl       -       tbl_fdbcc       # 25
        short           fdbcc_nle       -       tbl_fdbcc       # 26
        short           fdbcc_nlt       -       tbl_fdbcc       # 27
        short           fdbcc_nge       -       tbl_fdbcc       # 28
        short           fdbcc_ngt       -       tbl_fdbcc       # 29
        short           fdbcc_sneq      -       tbl_fdbcc       # 30
        short           fdbcc_st        -       tbl_fdbcc       # 31

#########################################################################
#                                                                       #
# IEEE Nonaware tests                                                   #
#                                                                       #
# For the IEEE nonaware tests, only the false branch changes the        #
# counter. However, the true branch may set bsun so we check to see     #
# if the NAN bit is set, in which case BSUN and AIOP will be set.       #
#                                                                       #
# The cases EQ and NE are shared by the Aware and Nonaware groups       #
# and are incapable of setting the BSUN exception bit.                  #
#                                                                       #
# Typically, only one of the two possible branch directions could       #
# have the NAN bit set.                                                 #
# (This is assuming the mutual exclusiveness of FPSR cc bit groupings   #
#  is preserved.)                                                       #
#                                                                       #
#########################################################################

#
# equal:
#
#       Z
#
fdbcc_eq:
        fbeq.w          fdbcc_eq_yes            # equal?
fdbcc_eq_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_eq_yes:
        rts

#
# not equal:
#       _
#       Z
#
fdbcc_neq:
        fbneq.w         fdbcc_neq_yes           # not equal?
fdbcc_neq_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_neq_yes:
        rts

#
# greater than:
#       _______
#       NANvZvN
#
fdbcc_gt:
        fbgt.w          fdbcc_gt_yes            # greater than?
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_false             # no;go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_gt_yes:
        rts                                     # do nothing

#
# not greater than:
#
#       NANvZvN
#
fdbcc_ngt:
        fbngt.w         fdbcc_ngt_yes           # not greater than?
fdbcc_ngt_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ngt_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_ngt_done          # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_ngt_done:
        rts                                     # no; do nothing

#
# greater than or equal:
#          _____
#       Zv(NANvN)
#
fdbcc_ge:
        fbge.w          fdbcc_ge_yes            # greater than or equal?
fdbcc_ge_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_false             # no;go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ge_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_ge_yes_done       # no;go do nothing
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_ge_yes_done:
        rts                                     # do nothing

#
# not (greater than or equal):
#              _
#       NANv(N^Z)
#
fdbcc_nge:
        fbnge.w         fdbcc_nge_yes           # not (greater than or equal)?
fdbcc_nge_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_nge_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_nge_done          # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_nge_done:
        rts                                     # no; do nothing

#
# less than:
#          _____
#       N^(NANvZ)
#
fdbcc_lt:
        fblt.w          fdbcc_lt_yes            # less than?
fdbcc_lt_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_false             # no; go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_lt_yes:
        rts                                     # do nothing

#
# not less than:
#              _
#       NANv(ZvN)
#
fdbcc_nlt:
        fbnlt.w         fdbcc_nlt_yes           # not less than?
fdbcc_nlt_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_nlt_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_nlt_done          # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_nlt_done:
        rts                                     # no; do nothing

#
# less than or equal:
#            ___
#       Zv(N^NAN)
#
fdbcc_le:
        fble.w          fdbcc_le_yes            # less than or equal?
fdbcc_le_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_false             # no; go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_le_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_le_yes_done       # no; go do nothing
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_le_yes_done:
        rts                                     # do nothing

#
# not (less than or equal):
#            ___
#       NANv(NvZ)
#
fdbcc_nle:
        fbnle.w         fdbcc_nle_yes           # not (less than or equal)?
fdbcc_nle_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_nle_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_nle_done          # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_nle_done:
        rts                                     # no; do nothing

#
# greater or less than:
#       _____
#       NANvZ
#
fdbcc_gl:
        fbgl.w          fdbcc_gl_yes            # greater or less than?
fdbcc_gl_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fdbcc_false             # no; handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_gl_yes:
        rts                                     # do nothing

#
# not (greater or less than):
#
#       NANvZ
#
fdbcc_ngl:
        fbngl.w         fdbcc_ngl_yes           # not (greater or less than)?
fdbcc_ngl_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ngl_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           fdbcc_ngl_done          # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_ngl_done:
        rts                                     # no; do nothing

#
# greater, less, or equal:
#       ___
#       NAN
#
fdbcc_gle:
        fbgle.w         fdbcc_gle_yes           # greater, less, or equal?
fdbcc_gle_no:
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_gle_yes:
        rts                                     # do nothing

#
# not (greater, less, or equal):
#
#       NAN
#
fdbcc_ngle:
        fbngle.w        fdbcc_ngle_yes          # not (greater, less, or equal)?
fdbcc_ngle_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ngle_yes:
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        rts                                     # no; do nothing

#########################################################################
#                                                                       #
# Miscellaneous tests                                                   #
#                                                                       #
# For the IEEE miscellaneous tests, all but fdbf and fdbt can set bsun. #
#                                                                       #
#########################################################################

#
# false:
#
#       False
#
fdbcc_f:                                        # no bsun possible
        bra.w           fdbcc_false             # go handle counter

#
# true:
#
#       True
#
fdbcc_t:                                        # no bsun possible
        rts                                     # do nothing

#
# signalling false:
#
#       False
#
fdbcc_sf:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set?
        beq.w           fdbcc_false             # no;go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # go handle counter

#
# signalling true:
#
#       True
#
fdbcc_st:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set?
        beq.b           fdbcc_st_done           # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_st_done:
        rts

#
# signalling equal:
#
#       Z
#
fdbcc_seq:
        fbseq.w         fdbcc_seq_yes           # signalling equal?
fdbcc_seq_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set?
        beq.w           fdbcc_false             # no;go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # go handle counter
fdbcc_seq_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set?
        beq.b           fdbcc_seq_yes_done      # no;go do nothing
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_seq_yes_done:
        rts                                     # yes; do nothing

#
# signalling not equal:
#       _
#       Z
#
fdbcc_sneq:
        fbsneq.w        fdbcc_sneq_yes          # signalling not equal?
fdbcc_sneq_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set?
        beq.w           fdbcc_false             # no;go handle counter
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
        bra.w           fdbcc_false             # go handle counter
fdbcc_sneq_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fdbcc_sneq_done         # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # is BSUN enabled?
        bne.w           fdbcc_bsun              # yes; we have an exception
fdbcc_sneq_done:
        rts

#########################################################################
#                                                                       #
# IEEE Aware tests                                                      #
#                                                                       #
# For the IEEE aware tests, action is only taken if the result is false.#
# Therefore, the opposite branch type is used to jump to the decrement  #
# routine.                                                              #
# The BSUN exception will not be set for any of these tests.            #
#                                                                       #
#########################################################################

#
# ordered greater than:
#       _______
#       NANvZvN
#
fdbcc_ogt:
        fbogt.w         fdbcc_ogt_yes           # ordered greater than?
fdbcc_ogt_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ogt_yes:
        rts                                     # yes; do nothing

#
# unordered or less or equal:
#       _______
#       NANvZvN
#
fdbcc_ule:
        fbule.w         fdbcc_ule_yes           # unordered or less or equal?
fdbcc_ule_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ule_yes:
        rts                                     # yes; do nothing

#
# ordered greater than or equal:
#          _____
#       Zv(NANvN)
#
fdbcc_oge:
        fboge.w         fdbcc_oge_yes           # ordered greater than or equal?
fdbcc_oge_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_oge_yes:
        rts                                     # yes; do nothing

#
# unordered or less than:
#              _
#       NANv(N^Z)
#
fdbcc_ult:
        fbult.w         fdbcc_ult_yes           # unordered or less than?
fdbcc_ult_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ult_yes:
        rts                                     # yes; do nothing

#
# ordered less than:
#          _____
#       N^(NANvZ)
#
fdbcc_olt:
        fbolt.w         fdbcc_olt_yes           # ordered less than?
fdbcc_olt_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_olt_yes:
        rts                                     # yes; do nothing

#
# unordered or greater or equal:
#
#       NANvZvN
#
fdbcc_uge:
        fbuge.w         fdbcc_uge_yes           # unordered or greater than?
fdbcc_uge_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_uge_yes:
        rts                                     # yes; do nothing

#
# ordered less than or equal:
#            ___
#       Zv(N^NAN)
#
fdbcc_ole:
        fbole.w         fdbcc_ole_yes           # ordered greater or less than?
fdbcc_ole_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ole_yes:
        rts                                     # yes; do nothing

#
# unordered or greater than:
#            ___
#       NANv(NvZ)
#
fdbcc_ugt:
        fbugt.w         fdbcc_ugt_yes           # unordered or greater than?
fdbcc_ugt_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ugt_yes:
        rts                                     # yes; do nothing

#
# ordered greater or less than:
#       _____
#       NANvZ
#
fdbcc_ogl:
        fbogl.w         fdbcc_ogl_yes           # ordered greater or less than?
fdbcc_ogl_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ogl_yes:
        rts                                     # yes; do nothing

#
# unordered or equal:
#
#       NANvZ
#
fdbcc_ueq:
        fbueq.w         fdbcc_ueq_yes           # unordered or equal?
fdbcc_ueq_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_ueq_yes:
        rts                                     # yes; do nothing

#
# ordered:
#       ___
#       NAN
#
fdbcc_or:
        fbor.w          fdbcc_or_yes            # ordered?
fdbcc_or_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_or_yes:
        rts                                     # yes; do nothing

#
# unordered:
#
#       NAN
#
fdbcc_un:
        fbun.w          fdbcc_un_yes            # unordered?
fdbcc_un_no:
        bra.w           fdbcc_false             # no; go handle counter
fdbcc_un_yes:
        rts                                     # yes; do nothing

#######################################################################

#
# the bsun exception bit was not set.
#
# (1) subtract 1 from the count register
# (2) if (cr == -1) then
#       pc = pc of next instruction
#     else
#       pc += sign_ext(16-bit displacement)
#
fdbcc_false:
        mov.b           1+EXC_OPWORD(%a6), %d1  # fetch lo opword
        andi.w          &0x7, %d1               # extract count register

        bsr.l           fetch_dreg              # fetch count value
# make sure that d0 isn't corrupted between calls...

        subq.w          &0x1, %d0               # Dn - 1 -> Dn

        bsr.l           store_dreg_l            # store new count value

        cmpi.w          %d0, &-0x1              # is (Dn == -1)?
        bne.b           fdbcc_false_cont        # no;
        rts

fdbcc_false_cont:
        mov.l           L_SCR1(%a6),%d0         # fetch displacement
        add.l           USER_FPIAR(%a6),%d0     # add instruction PC
        addq.l          &0x4,%d0                # add instruction length
        mov.l           %d0,EXC_PC(%a6)         # set new PC
        rts

# the emulation routine set bsun and BSUN was enabled. have to
# fix stack and jump to the bsun handler.
# let the caller of this routine shift the stack frame up to
# eliminate the effective address field.
fdbcc_bsun:
        mov.b           &fbsun_flg,SPCOND_FLG(%a6)
        rts

#########################################################################
# ftrapcc(): routine to emulate the ftrapcc instruction                 #
#                                                                       #
# XDEF **************************************************************** #
#       _ftrapcc()                                                      #
#                                                                       #
# XREF **************************************************************** #
#       none                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       none                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       none                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This routine checks which conditional predicate is specified by #
# the stacked ftrapcc instruction opcode and then branches to a routine #
# for that predicate. The corresponding fbcc instruction is then used   #
# to see whether the condition (specified by the stacked FPSR) is true  #
# or false.                                                             #
#       If a BSUN exception should be indicated, the BSUN and ABSUN     #
# bits are set in the stacked FPSR. If the BSUN exception is enabled,   #
# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an   #
# enabled BSUN should not be flagged and the predicate is true, then    #
# the ftrapcc_flg is set in the SPCOND_FLG location. These special      #
# flags indicate to the calling routine to emulate the exceptional      #
# condition.                                                            #
#                                                                       #
#########################################################################

        global          _ftrapcc
_ftrapcc:
        mov.w           EXC_CMDREG(%a6),%d0     # fetch predicate

        clr.l           %d1                     # clear scratch reg
        mov.b           FPSR_CC(%a6),%d1        # fetch fp ccodes
        ror.l           &0x8,%d1                # rotate to top byte
        fmov.l          %d1,%fpsr               # insert into FPSR

        mov.w           (tbl_ftrapcc.b,%pc,%d0.w*2), %d1 # load table
        jmp             (tbl_ftrapcc.b,%pc,%d1.w) # jump to ftrapcc routine

tbl_ftrapcc:
        short           ftrapcc_f       -       tbl_ftrapcc     # 00
        short           ftrapcc_eq      -       tbl_ftrapcc     # 01
        short           ftrapcc_ogt     -       tbl_ftrapcc     # 02
        short           ftrapcc_oge     -       tbl_ftrapcc     # 03
        short           ftrapcc_olt     -       tbl_ftrapcc     # 04
        short           ftrapcc_ole     -       tbl_ftrapcc     # 05
        short           ftrapcc_ogl     -       tbl_ftrapcc     # 06
        short           ftrapcc_or      -       tbl_ftrapcc     # 07
        short           ftrapcc_un      -       tbl_ftrapcc     # 08
        short           ftrapcc_ueq     -       tbl_ftrapcc     # 09
        short           ftrapcc_ugt     -       tbl_ftrapcc     # 10
        short           ftrapcc_uge     -       tbl_ftrapcc     # 11
        short           ftrapcc_ult     -       tbl_ftrapcc     # 12
        short           ftrapcc_ule     -       tbl_ftrapcc     # 13
        short           ftrapcc_neq     -       tbl_ftrapcc     # 14
        short           ftrapcc_t       -       tbl_ftrapcc     # 15
        short           ftrapcc_sf      -       tbl_ftrapcc     # 16
        short           ftrapcc_seq     -       tbl_ftrapcc     # 17
        short           ftrapcc_gt      -       tbl_ftrapcc     # 18
        short           ftrapcc_ge      -       tbl_ftrapcc     # 19
        short           ftrapcc_lt      -       tbl_ftrapcc     # 20
        short           ftrapcc_le      -       tbl_ftrapcc     # 21
        short           ftrapcc_gl      -       tbl_ftrapcc     # 22
        short           ftrapcc_gle     -       tbl_ftrapcc     # 23
        short           ftrapcc_ngle    -       tbl_ftrapcc     # 24
        short           ftrapcc_ngl     -       tbl_ftrapcc     # 25
        short           ftrapcc_nle     -       tbl_ftrapcc     # 26
        short           ftrapcc_nlt     -       tbl_ftrapcc     # 27
        short           ftrapcc_nge     -       tbl_ftrapcc     # 28
        short           ftrapcc_ngt     -       tbl_ftrapcc     # 29
        short           ftrapcc_sneq    -       tbl_ftrapcc     # 30
        short           ftrapcc_st      -       tbl_ftrapcc     # 31

#########################################################################
#                                                                       #
# IEEE Nonaware tests                                                   #
#                                                                       #
# For the IEEE nonaware tests, we set the result based on the           #
# floating point condition codes. In addition, we check to see          #
# if the NAN bit is set, in which case BSUN and AIOP will be set.       #
#                                                                       #
# The cases EQ and NE are shared by the Aware and Nonaware groups       #
# and are incapable of setting the BSUN exception bit.                  #
#                                                                       #
# Typically, only one of the two possible branch directions could       #
# have the NAN bit set.                                                 #
#                                                                       #
#########################################################################

#
# equal:
#
#       Z
#
ftrapcc_eq:
        fbeq.w          ftrapcc_trap            # equal?
ftrapcc_eq_no:
        rts                                     # do nothing

#
# not equal:
#       _
#       Z
#
ftrapcc_neq:
        fbneq.w         ftrapcc_trap            # not equal?
ftrapcc_neq_no:
        rts                                     # do nothing

#
# greater than:
#       _______
#       NANvZvN
#
ftrapcc_gt:
        fbgt.w          ftrapcc_trap            # greater than?
ftrapcc_gt_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           ftrapcc_gt_done         # no
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_gt_done:
        rts                                     # no; do nothing

#
# not greater than:
#
#       NANvZvN
#
ftrapcc_ngt:
        fbngt.w         ftrapcc_ngt_yes         # not greater than?
ftrapcc_ngt_no:
        rts                                     # do nothing
ftrapcc_ngt_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# greater than or equal:
#          _____
#       Zv(NANvN)
#
ftrapcc_ge:
        fbge.w          ftrapcc_ge_yes          # greater than or equal?
ftrapcc_ge_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           ftrapcc_ge_done         # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_ge_done:
        rts                                     # no; do nothing
ftrapcc_ge_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# not (greater than or equal):
#              _
#       NANv(N^Z)
#
ftrapcc_nge:
        fbnge.w         ftrapcc_nge_yes         # not (greater than or equal)?
ftrapcc_nge_no:
        rts                                     # do nothing
ftrapcc_nge_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# less than:
#          _____
#       N^(NANvZ)
#
ftrapcc_lt:
        fblt.w          ftrapcc_trap            # less than?
ftrapcc_lt_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           ftrapcc_lt_done         # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_lt_done:
        rts                                     # no; do nothing

#
# not less than:
#              _
#       NANv(ZvN)
#
ftrapcc_nlt:
        fbnlt.w         ftrapcc_nlt_yes         # not less than?
ftrapcc_nlt_no:
        rts                                     # do nothing
ftrapcc_nlt_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# less than or equal:
#            ___
#       Zv(N^NAN)
#
ftrapcc_le:
        fble.w          ftrapcc_le_yes          # less than or equal?
ftrapcc_le_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           ftrapcc_le_done         # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_le_done:
        rts                                     # no; do nothing
ftrapcc_le_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# not (less than or equal):
#            ___
#       NANv(NvZ)
#
ftrapcc_nle:
        fbnle.w         ftrapcc_nle_yes         # not (less than or equal)?
ftrapcc_nle_no:
        rts                                     # do nothing
ftrapcc_nle_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# greater or less than:
#       _____
#       NANvZ
#
ftrapcc_gl:
        fbgl.w          ftrapcc_trap            # greater or less than?
ftrapcc_gl_no:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.b           ftrapcc_gl_done         # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_gl_done:
        rts                                     # no; do nothing

#
# not (greater or less than):
#
#       NANvZ
#
ftrapcc_ngl:
        fbngl.w         ftrapcc_ngl_yes         # not (greater or less than)?
ftrapcc_ngl_no:
        rts                                     # do nothing
ftrapcc_ngl_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# greater, less, or equal:
#       ___
#       NAN
#
ftrapcc_gle:
        fbgle.w         ftrapcc_trap            # greater, less, or equal?
ftrapcc_gle_no:
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        rts                                     # no; do nothing

#
# not (greater, less, or equal):
#
#       NAN
#
ftrapcc_ngle:
        fbngle.w        ftrapcc_ngle_yes        # not (greater, less, or equal)?
ftrapcc_ngle_no:
        rts                                     # do nothing
ftrapcc_ngle_yes:
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#########################################################################
#                                                                       #
# Miscellaneous tests                                                   #
#                                                                       #
# For the IEEE aware tests, we only have to set the result based on the #
# floating point condition codes. The BSUN exception will not be        #
# set for any of these tests.                                           #
#                                                                       #
#########################################################################

#
# false:
#
#       False
#
ftrapcc_f:
        rts                                     # do nothing

#
# true:
#
#       True
#
ftrapcc_t:
        bra.w           ftrapcc_trap            # go take trap

#
# signalling false:
#
#       False
#
ftrapcc_sf:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.b           ftrapcc_sf_done         # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_sf_done:
        rts                                     # no; do nothing

#
# signalling true:
#
#       True
#
ftrapcc_st:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# signalling equal:
#
#       Z
#
ftrapcc_seq:
        fbseq.w         ftrapcc_seq_yes         # signalling equal?
ftrapcc_seq_no:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           ftrapcc_seq_done        # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_seq_done:
        rts                                     # no; do nothing
ftrapcc_seq_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#
# signalling not equal:
#       _
#       Z
#
ftrapcc_sneq:
        fbsneq.w        ftrapcc_sneq_yes        # signalling equal?
ftrapcc_sneq_no:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           ftrapcc_sneq_no_done    # no; go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
ftrapcc_sneq_no_done:
        rts                                     # do nothing
ftrapcc_sneq_yes:
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           ftrapcc_trap            # no; go take trap
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        btst            &bsun_bit, FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           ftrapcc_bsun            # yes
        bra.w           ftrapcc_trap            # no; go take trap

#########################################################################
#                                                                       #
# IEEE Aware tests                                                      #
#                                                                       #
# For the IEEE aware tests, we only have to set the result based on the #
# floating point condition codes. The BSUN exception will not be        #
# set for any of these tests.                                           #
#                                                                       #
#########################################################################

#
# ordered greater than:
#       _______
#       NANvZvN
#
ftrapcc_ogt:
        fbogt.w         ftrapcc_trap            # ordered greater than?
ftrapcc_ogt_no:
        rts                                     # do nothing

#
# unordered or less or equal:
#       _______
#       NANvZvN
#
ftrapcc_ule:
        fbule.w         ftrapcc_trap            # unordered or less or equal?
ftrapcc_ule_no:
        rts                                     # do nothing

#
# ordered greater than or equal:
#          _____
#       Zv(NANvN)
#
ftrapcc_oge:
        fboge.w         ftrapcc_trap            # ordered greater than or equal?
ftrapcc_oge_no:
        rts                                     # do nothing

#
# unordered or less than:
#              _
#       NANv(N^Z)
#
ftrapcc_ult:
        fbult.w         ftrapcc_trap            # unordered or less than?
ftrapcc_ult_no:
        rts                                     # do nothing

#
# ordered less than:
#          _____
#       N^(NANvZ)
#
ftrapcc_olt:
        fbolt.w         ftrapcc_trap            # ordered less than?
ftrapcc_olt_no:
        rts                                     # do nothing

#
# unordered or greater or equal:
#
#       NANvZvN
#
ftrapcc_uge:
        fbuge.w         ftrapcc_trap            # unordered or greater than?
ftrapcc_uge_no:
        rts                                     # do nothing

#
# ordered less than or equal:
#            ___
#       Zv(N^NAN)
#
ftrapcc_ole:
        fbole.w         ftrapcc_trap            # ordered greater or less than?
ftrapcc_ole_no:
        rts                                     # do nothing

#
# unordered or greater than:
#            ___
#       NANv(NvZ)
#
ftrapcc_ugt:
        fbugt.w         ftrapcc_trap            # unordered or greater than?
ftrapcc_ugt_no:
        rts                                     # do nothing

#
# ordered greater or less than:
#       _____
#       NANvZ
#
ftrapcc_ogl:
        fbogl.w         ftrapcc_trap            # ordered greater or less than?
ftrapcc_ogl_no:
        rts                                     # do nothing

#
# unordered or equal:
#
#       NANvZ
#
ftrapcc_ueq:
        fbueq.w         ftrapcc_trap            # unordered or equal?
ftrapcc_ueq_no:
        rts                                     # do nothing

#
# ordered:
#       ___
#       NAN
#
ftrapcc_or:
        fbor.w          ftrapcc_trap            # ordered?
ftrapcc_or_no:
        rts                                     # do nothing

#
# unordered:
#
#       NAN
#
ftrapcc_un:
        fbun.w          ftrapcc_trap            # unordered?
ftrapcc_un_no:
        rts                                     # do nothing

#######################################################################

# the bsun exception bit was not set.
# we will need to jump to the ftrapcc vector. the stack frame
# is the same size as that of the fp unimp instruction. the
# only difference is that the <ea> field should hold the PC
# of the ftrapcc instruction and the vector offset field
# should denote the ftrapcc trap.
ftrapcc_trap:
        mov.b           &ftrapcc_flg,SPCOND_FLG(%a6)
        rts

# the emulation routine set bsun and BSUN was enabled. have to
# fix stack and jump to the bsun handler.
# let the caller of this routine shift the stack frame up to
# eliminate the effective address field.
ftrapcc_bsun:
        mov.b           &fbsun_flg,SPCOND_FLG(%a6)
        rts

#########################################################################
# fscc(): routine to emulate the fscc instruction                       #
#                                                                       #
# XDEF **************************************************************** #
#       _fscc()                                                         #
#                                                                       #
# XREF **************************************************************** #
#       store_dreg_b() - store result to data register file             #
#       dec_areg() - decrement an areg for -(an) mode                   #
#       inc_areg() - increment an areg for (an)+ mode                   #
#       _dmem_write_byte() - store result to memory                     #
#                                                                       #
# INPUT *************************************************************** #
#       none                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       none                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This routine checks which conditional predicate is specified by #
# the stacked fscc instruction opcode and then branches to a routine    #
# for that predicate. The corresponding fbcc instruction is then used   #
# to see whether the condition (specified by the stacked FPSR) is true  #
# or false.                                                             #
#       If a BSUN exception should be indicated, the BSUN and ABSUN     #
# bits are set in the stacked FPSR. If the BSUN exception is enabled,   #
# the fbsun_flg is set in the SPCOND_FLG location on the stack. If an   #
# enabled BSUN should not be flagged and the predicate is true, then    #
# the result is stored to the data register file or memory              #
#                                                                       #
#########################################################################

        global          _fscc
_fscc:
        mov.w           EXC_CMDREG(%a6),%d0     # fetch predicate

        clr.l           %d1                     # clear scratch reg
        mov.b           FPSR_CC(%a6),%d1        # fetch fp ccodes
        ror.l           &0x8,%d1                # rotate to top byte
        fmov.l          %d1,%fpsr               # insert into FPSR

        mov.w           (tbl_fscc.b,%pc,%d0.w*2),%d1 # load table
        jmp             (tbl_fscc.b,%pc,%d1.w)  # jump to fscc routine

tbl_fscc:
        short           fscc_f          -       tbl_fscc        # 00
        short           fscc_eq         -       tbl_fscc        # 01
        short           fscc_ogt        -       tbl_fscc        # 02
        short           fscc_oge        -       tbl_fscc        # 03
        short           fscc_olt        -       tbl_fscc        # 04
        short           fscc_ole        -       tbl_fscc        # 05
        short           fscc_ogl        -       tbl_fscc        # 06
        short           fscc_or         -       tbl_fscc        # 07
        short           fscc_un         -       tbl_fscc        # 08
        short           fscc_ueq        -       tbl_fscc        # 09
        short           fscc_ugt        -       tbl_fscc        # 10
        short           fscc_uge        -       tbl_fscc        # 11
        short           fscc_ult        -       tbl_fscc        # 12
        short           fscc_ule        -       tbl_fscc        # 13
        short           fscc_neq        -       tbl_fscc        # 14
        short           fscc_t          -       tbl_fscc        # 15
        short           fscc_sf         -       tbl_fscc        # 16
        short           fscc_seq        -       tbl_fscc        # 17
        short           fscc_gt         -       tbl_fscc        # 18
        short           fscc_ge         -       tbl_fscc        # 19
        short           fscc_lt         -       tbl_fscc        # 20
        short           fscc_le         -       tbl_fscc        # 21
        short           fscc_gl         -       tbl_fscc        # 22
        short           fscc_gle        -       tbl_fscc        # 23
        short           fscc_ngle       -       tbl_fscc        # 24
        short           fscc_ngl        -       tbl_fscc        # 25
        short           fscc_nle        -       tbl_fscc        # 26
        short           fscc_nlt        -       tbl_fscc        # 27
        short           fscc_nge        -       tbl_fscc        # 28
        short           fscc_ngt        -       tbl_fscc        # 29
        short           fscc_sneq       -       tbl_fscc        # 30
        short           fscc_st         -       tbl_fscc        # 31

#########################################################################
#                                                                       #
# IEEE Nonaware tests                                                   #
#                                                                       #
# For the IEEE nonaware tests, we set the result based on the           #
# floating point condition codes. In addition, we check to see          #
# if the NAN bit is set, in which case BSUN and AIOP will be set.       #
#                                                                       #
# The cases EQ and NE are shared by the Aware and Nonaware groups       #
# and are incapable of setting the BSUN exception bit.                  #
#                                                                       #
# Typically, only one of the two possible branch directions could       #
# have the NAN bit set.                                                 #
#                                                                       #
#########################################################################

#
# equal:
#
#       Z
#
fscc_eq:
        fbeq.w          fscc_eq_yes             # equal?
fscc_eq_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_eq_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# not equal:
#       _
#       Z
#
fscc_neq:
        fbneq.w         fscc_neq_yes            # not equal?
fscc_neq_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_neq_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# greater than:
#       _______
#       NANvZvN
#
fscc_gt:
        fbgt.w          fscc_gt_yes             # greater than?
fscc_gt_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_gt_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# not greater than:
#
#       NANvZvN
#
fscc_ngt:
        fbngt.w         fscc_ngt_yes            # not greater than?
fscc_ngt_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ngt_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# greater than or equal:
#          _____
#       Zv(NANvN)
#
fscc_ge:
        fbge.w          fscc_ge_yes             # greater than or equal?
fscc_ge_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_ge_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# not (greater than or equal):
#              _
#       NANv(N^Z)
#
fscc_nge:
        fbnge.w         fscc_nge_yes            # not (greater than or equal)?
fscc_nge_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_nge_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# less than:
#          _____
#       N^(NANvZ)
#
fscc_lt:
        fblt.w          fscc_lt_yes             # less than?
fscc_lt_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_lt_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# not less than:
#              _
#       NANv(ZvN)
#
fscc_nlt:
        fbnlt.w         fscc_nlt_yes            # not less than?
fscc_nlt_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_nlt_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# less than or equal:
#            ___
#       Zv(N^NAN)
#
fscc_le:
        fble.w          fscc_le_yes             # less than or equal?
fscc_le_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_le_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# not (less than or equal):
#            ___
#       NANv(NvZ)
#
fscc_nle:
        fbnle.w         fscc_nle_yes            # not (less than or equal)?
fscc_nle_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_nle_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# greater or less than:
#       _____
#       NANvZ
#
fscc_gl:
        fbgl.w          fscc_gl_yes             # greater or less than?
fscc_gl_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_gl_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# not (greater or less than):
#
#       NANvZ
#
fscc_ngl:
        fbngl.w         fscc_ngl_yes            # not (greater or less than)?
fscc_ngl_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ngl_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # is NAN set in cc?
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# greater, less, or equal:
#       ___
#       NAN
#
fscc_gle:
        fbgle.w         fscc_gle_yes            # greater, less, or equal?
fscc_gle_no:
        clr.b           %d0                     # set false
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_gle_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# not (greater, less, or equal):
#
#       NAN
#
fscc_ngle:
        fbngle.w                fscc_ngle_yes   # not (greater, less, or equal)?
fscc_ngle_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ngle_yes:
        st              %d0                     # set true
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#########################################################################
#                                                                       #
# Miscellaneous tests                                                   #
#                                                                       #
# For the IEEE aware tests, we only have to set the result based on the #
# floating point condition codes. The BSUN exception will not be        #
# set for any of these tests.                                           #
#                                                                       #
#########################################################################

#
# false:
#
#       False
#
fscc_f:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish

#
# true:
#
#       True
#
fscc_t:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# signalling false:
#
#       False
#
fscc_sf:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# signalling true:
#
#       True
#
fscc_st:
        st              %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# signalling equal:
#
#       Z
#
fscc_seq:
        fbseq.w         fscc_seq_yes            # signalling equal?
fscc_seq_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_seq_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#
# signalling not equal:
#       _
#       Z
#
fscc_sneq:
        fbsneq.w        fscc_sneq_yes           # signalling equal?
fscc_sneq_no:
        clr.b           %d0                     # set false
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish
fscc_sneq_yes:
        st              %d0                     # set true
        btst            &nan_bit, FPSR_CC(%a6)  # set BSUN exc bit
        beq.w           fscc_done               # no;go finish
        ori.l           &bsun_mask+aiop_mask, USER_FPSR(%a6) # set BSUN exc bit
        bra.w           fscc_chk_bsun           # go finish

#########################################################################
#                                                                       #
# IEEE Aware tests                                                      #
#                                                                       #
# For the IEEE aware tests, we only have to set the result based on the #
# floating point condition codes. The BSUN exception will not be        #
# set for any of these tests.                                           #
#                                                                       #
#########################################################################

#
# ordered greater than:
#       _______
#       NANvZvN
#
fscc_ogt:
        fbogt.w         fscc_ogt_yes            # ordered greater than?
fscc_ogt_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ogt_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered or less or equal:
#       _______
#       NANvZvN
#
fscc_ule:
        fbule.w         fscc_ule_yes            # unordered or less or equal?
fscc_ule_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ule_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# ordered greater than or equal:
#          _____
#       Zv(NANvN)
#
fscc_oge:
        fboge.w         fscc_oge_yes            # ordered greater than or equal?
fscc_oge_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_oge_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered or less than:
#              _
#       NANv(N^Z)
#
fscc_ult:
        fbult.w         fscc_ult_yes            # unordered or less than?
fscc_ult_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ult_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# ordered less than:
#          _____
#       N^(NANvZ)
#
fscc_olt:
        fbolt.w         fscc_olt_yes            # ordered less than?
fscc_olt_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_olt_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered or greater or equal:
#
#       NANvZvN
#
fscc_uge:
        fbuge.w         fscc_uge_yes            # unordered or greater than?
fscc_uge_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_uge_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# ordered less than or equal:
#            ___
#       Zv(N^NAN)
#
fscc_ole:
        fbole.w         fscc_ole_yes            # ordered greater or less than?
fscc_ole_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ole_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered or greater than:
#            ___
#       NANv(NvZ)
#
fscc_ugt:
        fbugt.w         fscc_ugt_yes            # unordered or greater than?
fscc_ugt_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ugt_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# ordered greater or less than:
#       _____
#       NANvZ
#
fscc_ogl:
        fbogl.w         fscc_ogl_yes            # ordered greater or less than?
fscc_ogl_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ogl_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered or equal:
#
#       NANvZ
#
fscc_ueq:
        fbueq.w         fscc_ueq_yes            # unordered or equal?
fscc_ueq_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_ueq_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# ordered:
#       ___
#       NAN
#
fscc_or:
        fbor.w          fscc_or_yes             # ordered?
fscc_or_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_or_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#
# unordered:
#
#       NAN
#
fscc_un:
        fbun.w          fscc_un_yes             # unordered?
fscc_un_no:
        clr.b           %d0                     # set false
        bra.w           fscc_done               # go finish
fscc_un_yes:
        st              %d0                     # set true
        bra.w           fscc_done               # go finish

#######################################################################

#
# the bsun exception bit was set. now, check to see is BSUN
# is enabled. if so, don't store result and correct stack frame
# for a bsun exception.
#
fscc_chk_bsun:
        btst            &bsun_bit,FPCR_ENABLE(%a6) # was BSUN set?
        bne.w           fscc_bsun

#
# the bsun exception bit was not set.
# the result has been selected.
# now, check to see if the result is to be stored in the data register
# file or in memory.
#
fscc_done:
        mov.l           %d0,%a0                 # save result for a moment

        mov.b           1+EXC_OPWORD(%a6),%d1   # fetch lo opword
        mov.l           %d1,%d0                 # make a copy
        andi.b          &0x38,%d1               # extract src mode

        bne.b           fscc_mem_op             # it's a memory operation

        mov.l           %d0,%d1
        andi.w          &0x7,%d1                # pass index in d1
        mov.l           %a0,%d0                 # pass result in d0
        bsr.l           store_dreg_b            # save result in regfile
        rts

#
# the stacked <ea> is correct with the exception of:
#       -> Dn : <ea> is garbage
#
# if the addressing mode is post-increment or pre-decrement,
# then the address registers have not been updated.
#
fscc_mem_op:
        cmpi.b          %d1,&0x18               # is <ea> (An)+ ?
        beq.b           fscc_mem_inc            # yes
        cmpi.b          %d1,&0x20               # is <ea> -(An) ?
        beq.b           fscc_mem_dec            # yes

        mov.l           %a0,%d0                 # pass result in d0
        mov.l           EXC_EA(%a6),%a0         # fetch <ea>
        bsr.l           _dmem_write_byte        # write result byte

        tst.l           %d1                     # did dstore fail?
        bne.w           fscc_err                # yes

        rts

# addresing mode is post-increment. write the result byte. if the write
# fails then don't update the address register. if write passes then
# call inc_areg() to update the address register.
fscc_mem_inc:
        mov.l           %a0,%d0                 # pass result in d0
        mov.l           EXC_EA(%a6),%a0         # fetch <ea>
        bsr.l           _dmem_write_byte        # write result byte

        tst.l           %d1                     # did dstore fail?
        bne.w           fscc_err                # yes

        mov.b           0x1+EXC_OPWORD(%a6),%d1 # fetch opword
        andi.w          &0x7,%d1                # pass index in d1
        movq.l          &0x1,%d0                # pass amt to inc by
        bsr.l           inc_areg                # increment address register

        rts

# addressing mode is pre-decrement. write the result byte. if the write
# fails then don't update the address register. if the write passes then
# call dec_areg() to update the address register.
fscc_mem_dec:
        mov.l           %a0,%d0                 # pass result in d0
        mov.l           EXC_EA(%a6),%a0         # fetch <ea>
        bsr.l           _dmem_write_byte        # write result byte

        tst.l           %d1                     # did dstore fail?
        bne.w           fscc_err                # yes

        mov.b           0x1+EXC_OPWORD(%a6),%d1 # fetch opword
        andi.w          &0x7,%d1                # pass index in d1
        movq.l          &0x1,%d0                # pass amt to dec by
        bsr.l           dec_areg                # decrement address register

        rts

# the emulation routine set bsun and BSUN was enabled. have to
# fix stack and jump to the bsun handler.
# let the caller of this routine shift the stack frame up to
# eliminate the effective address field.
fscc_bsun:
        mov.b           &fbsun_flg,SPCOND_FLG(%a6)
        rts

# the byte write to memory has failed. pass the failing effective address
# and a FSLW to funimp_dacc().
fscc_err:
        mov.w           &0x00a1,EXC_VOFF(%a6)
        bra.l           facc_finish

#########################################################################
# XDEF **************************************************************** #
#       fmovm_dynamic(): emulate "fmovm" dynamic instruction            #
#                                                                       #
# XREF **************************************************************** #
#       fetch_dreg() - fetch data register                              #
#       {i,d,}mem_read() - fetch data from memory                       #
#       _mem_write() - write data to memory                             #
#       iea_iacc() - instruction memory access error occurred           #
#       iea_dacc() - data memory access error occurred                  #
#       restore() - restore An index regs if access error occurred      #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       If instr is "fmovm Dn,-(A7)" from supervisor mode,              #
#               d0 = size of dump                                       #
#               d1 = Dn                                                 #
#       Else if instruction access error,                               #
#               d0 = FSLW                                               #
#       Else if data access error,                                      #
#               d0 = FSLW                                               #
#               a0 = address of fault                                   #
#       Else                                                            #
#               none.                                                   #
#                                                                       #
# ALGORITHM *********************************************************** #
#       The effective address must be calculated since this is entered  #
# from an "Unimplemented Effective Address" exception handler. So, we   #
# have our own fcalc_ea() routine here. If an access error is flagged   #
# by a _{i,d,}mem_read() call, we must exit through the special         #
# handler.                                                              #
#       The data register is determined and its value loaded to get the #
# string of FP registers affected. This value is used as an index into  #
# a lookup table such that we can determine the number of bytes         #
# involved.                                                             #
#       If the instruction is "fmovm.x <ea>,Dn", a _mem_read() is used  #
# to read in all FP values. Again, _mem_read() may fail and require a   #
# special exit.                                                         #
#       If the instruction is "fmovm.x DN,<ea>", a _mem_write() is used #
# to write all FP values. _mem_write() may also fail.                   #
#       If the instruction is "fmovm.x DN,-(a7)" from supervisor mode,  #
# then we return the size of the dump and the string to the caller      #
# so that the move can occur outside of this routine. This special      #
# case is required so that moves to the system stack are handled        #
# correctly.                                                            #
#                                                                       #
# DYNAMIC:                                                              #
#       fmovm.x dn, <ea>                                                #
#       fmovm.x <ea>, dn                                                #
#                                                                       #
#             <WORD 1>                <WORD2>                           #
#       1111 0010 00 |<ea>|     11@& 1000 0$$$ 0000                     #
#                                                                       #
#       & = (0): predecrement addressing mode                           #
#           (1): postincrement or control addressing mode               #
#       @ = (0): move listed regs from memory to the FPU                #
#           (1): move listed regs from the FPU to memory                #
#       $$$    : index of data register holding reg select mask         #
#                                                                       #
# NOTES:                                                                #
#       If the data register holds a zero, then the                     #
#       instruction is a nop.                                           #
#                                                                       #
#########################################################################

        global          fmovm_dynamic
fmovm_dynamic:

# extract the data register in which the bit string resides...
        mov.b           1+EXC_EXTWORD(%a6),%d1  # fetch extword
        andi.w          &0x70,%d1               # extract reg bits
        lsr.b           &0x4,%d1                # shift into lo bits

# fetch the bit string into d0...
        bsr.l           fetch_dreg              # fetch reg string

        andi.l          &0x000000ff,%d0         # keep only lo byte

        mov.l           %d0,-(%sp)              # save strg
        mov.b           (tbl_fmovm_size.w,%pc,%d0),%d0
        mov.l           %d0,-(%sp)              # save size
        bsr.l           fmovm_calc_ea           # calculate <ea>
        mov.l           (%sp)+,%d0              # restore size
        mov.l           (%sp)+,%d1              # restore strg

# if the bit string is a zero, then the operation is a no-op
# but, make sure that we've calculated ea and advanced the opword pointer
        beq.w           fmovm_data_done

# separate move ins from move outs...
        btst            &0x5,EXC_EXTWORD(%a6)   # is it a move in or out?
        beq.w           fmovm_data_in           # it's a move out

#############
# MOVE OUT: #
#############
fmovm_data_out:
        btst            &0x4,EXC_EXTWORD(%a6)   # control or predecrement?
        bne.w           fmovm_out_ctrl          # control

############################
fmovm_out_predec:
# for predecrement mode, the bit string is the opposite of both control
# operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0)
# here, we convert it to be just like the others...
        mov.b           (tbl_fmovm_convert.w,%pc,%d1.w*1),%d1

        btst            &0x5,EXC_SR(%a6)        # user or supervisor mode?
        beq.b           fmovm_out_ctrl          # user

fmovm_out_predec_s:
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)?
        bne.b           fmovm_out_ctrl

# the operation was unfortunately an: fmovm.x dn,-(sp)
# called from supervisor mode.
# we're also passing "size" and "strg" back to the calling routine
        rts

############################
fmovm_out_ctrl:
        mov.l           %a0,%a1                 # move <ea> to a1

        sub.l           %d0,%sp                 # subtract size of dump
        lea             (%sp),%a0

        tst.b           %d1                     # should FP0 be moved?
        bpl.b           fmovm_out_ctrl_fp1      # no

        mov.l           0x0+EXC_FP0(%a6),(%a0)+ # yes
        mov.l           0x4+EXC_FP0(%a6),(%a0)+
        mov.l           0x8+EXC_FP0(%a6),(%a0)+

fmovm_out_ctrl_fp1:
        lsl.b           &0x1,%d1                # should FP1 be moved?
        bpl.b           fmovm_out_ctrl_fp2      # no

        mov.l           0x0+EXC_FP1(%a6),(%a0)+ # yes
        mov.l           0x4+EXC_FP1(%a6),(%a0)+
        mov.l           0x8+EXC_FP1(%a6),(%a0)+

fmovm_out_ctrl_fp2:
        lsl.b           &0x1,%d1                # should FP2 be moved?
        bpl.b           fmovm_out_ctrl_fp3      # no

        fmovm.x         &0x20,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_fp3:
        lsl.b           &0x1,%d1                # should FP3 be moved?
        bpl.b           fmovm_out_ctrl_fp4      # no

        fmovm.x         &0x10,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_fp4:
        lsl.b           &0x1,%d1                # should FP4 be moved?
        bpl.b           fmovm_out_ctrl_fp5      # no

        fmovm.x         &0x08,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_fp5:
        lsl.b           &0x1,%d1                # should FP5 be moved?
        bpl.b           fmovm_out_ctrl_fp6      # no

        fmovm.x         &0x04,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_fp6:
        lsl.b           &0x1,%d1                # should FP6 be moved?
        bpl.b           fmovm_out_ctrl_fp7      # no

        fmovm.x         &0x02,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_fp7:
        lsl.b           &0x1,%d1                # should FP7 be moved?
        bpl.b           fmovm_out_ctrl_done     # no

        fmovm.x         &0x01,(%a0)             # yes
        add.l           &0xc,%a0

fmovm_out_ctrl_done:
        mov.l           %a1,L_SCR1(%a6)

        lea             (%sp),%a0               # pass: supervisor src
        mov.l           %d0,-(%sp)              # save size
        bsr.l           _dmem_write             # copy data to user mem

        mov.l           (%sp)+,%d0
        add.l           %d0,%sp                 # clear fpreg data from stack

        tst.l           %d1                     # did dstore err?
        bne.w           fmovm_out_err           # yes

        rts

############
# MOVE IN: #
############
fmovm_data_in:
        mov.l           %a0,L_SCR1(%a6)

        sub.l           %d0,%sp                 # make room for fpregs
        lea             (%sp),%a1

        mov.l           %d1,-(%sp)              # save bit string for later
        mov.l           %d0,-(%sp)              # save # of bytes

        bsr.l           _dmem_read              # copy data from user mem

        mov.l           (%sp)+,%d0              # retrieve # of bytes

        tst.l           %d1                     # did dfetch fail?
        bne.w           fmovm_in_err            # yes

        mov.l           (%sp)+,%d1              # load bit string

        lea             (%sp),%a0               # addr of stack

        tst.b           %d1                     # should FP0 be moved?
        bpl.b           fmovm_data_in_fp1       # no

        mov.l           (%a0)+,0x0+EXC_FP0(%a6) # yes
        mov.l           (%a0)+,0x4+EXC_FP0(%a6)
        mov.l           (%a0)+,0x8+EXC_FP0(%a6)

fmovm_data_in_fp1:
        lsl.b           &0x1,%d1                # should FP1 be moved?
        bpl.b           fmovm_data_in_fp2       # no

        mov.l           (%a0)+,0x0+EXC_FP1(%a6) # yes
        mov.l           (%a0)+,0x4+EXC_FP1(%a6)
        mov.l           (%a0)+,0x8+EXC_FP1(%a6)

fmovm_data_in_fp2:
        lsl.b           &0x1,%d1                # should FP2 be moved?
        bpl.b           fmovm_data_in_fp3       # no

        fmovm.x         (%a0)+,&0x20            # yes

fmovm_data_in_fp3:
        lsl.b           &0x1,%d1                # should FP3 be moved?
        bpl.b           fmovm_data_in_fp4       # no

        fmovm.x         (%a0)+,&0x10            # yes

fmovm_data_in_fp4:
        lsl.b           &0x1,%d1                # should FP4 be moved?
        bpl.b           fmovm_data_in_fp5       # no

        fmovm.x         (%a0)+,&0x08            # yes

fmovm_data_in_fp5:
        lsl.b           &0x1,%d1                # should FP5 be moved?
        bpl.b           fmovm_data_in_fp6       # no

        fmovm.x         (%a0)+,&0x04            # yes

fmovm_data_in_fp6:
        lsl.b           &0x1,%d1                # should FP6 be moved?
        bpl.b           fmovm_data_in_fp7       # no

        fmovm.x         (%a0)+,&0x02            # yes

fmovm_data_in_fp7:
        lsl.b           &0x1,%d1                # should FP7 be moved?
        bpl.b           fmovm_data_in_done      # no

        fmovm.x         (%a0)+,&0x01            # yes

fmovm_data_in_done:
        add.l           %d0,%sp                 # remove fpregs from stack
        rts

#####################################

fmovm_data_done:
        rts

##############################################################################

#
# table indexed by the operation's bit string that gives the number
# of bytes that will be moved.
#
# number of bytes = (# of 1's in bit string) * 12(bytes/fpreg)
#
tbl_fmovm_size:
        byte    0x00,0x0c,0x0c,0x18,0x0c,0x18,0x18,0x24
        byte    0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
        byte    0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
        byte    0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
        byte    0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
        byte    0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48
        byte    0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
        byte    0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54
        byte    0x3c,0x48,0x48,0x54,0x48,0x54,0x54,0x60

#
# table to convert a pre-decrement bit string into a post-increment
# or control bit string.
# ex:   0x00    ==>     0x00
#       0x01    ==>     0x80
#       0x02    ==>     0x40
#               .
#               .
#       0xfd    ==>     0xbf
#       0xfe    ==>     0x7f
#       0xff    ==>     0xff
#
tbl_fmovm_convert:
        byte    0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0
        byte    0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0
        byte    0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8
        byte    0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8
        byte    0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4
        byte    0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4
        byte    0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec
        byte    0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc
        byte    0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2
        byte    0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2
        byte    0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea
        byte    0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa
        byte    0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6
        byte    0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6
        byte    0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee
        byte    0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe
        byte    0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1
        byte    0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1
        byte    0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9
        byte    0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9
        byte    0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5
        byte    0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5
        byte    0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed
        byte    0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd
        byte    0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3
        byte    0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3
        byte    0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb
        byte    0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb
        byte    0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7
        byte    0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7
        byte    0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef
        byte    0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff

        global          fmovm_calc_ea
###############################################
# _fmovm_calc_ea: calculate effective address #
###############################################
fmovm_calc_ea:
        mov.l           %d0,%a0                 # move # bytes to a0

# currently, MODE and REG are taken from the EXC_OPWORD. this could be
# easily changed if they were inputs passed in registers.
        mov.w           EXC_OPWORD(%a6),%d0     # fetch opcode word
        mov.w           %d0,%d1                 # make a copy

        andi.w          &0x3f,%d0               # extract mode field
        andi.l          &0x7,%d1                # extract reg  field

# jump to the corresponding function for each {MODE,REG} pair.
        mov.w           (tbl_fea_mode.b,%pc,%d0.w*2),%d0 # fetch jmp distance
        jmp             (tbl_fea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode

        swbeg           &64
tbl_fea_mode:
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode

        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode

        short           faddr_ind_a0    -       tbl_fea_mode
        short           faddr_ind_a1    -       tbl_fea_mode
        short           faddr_ind_a2    -       tbl_fea_mode
        short           faddr_ind_a3    -       tbl_fea_mode
        short           faddr_ind_a4    -       tbl_fea_mode
        short           faddr_ind_a5    -       tbl_fea_mode
        short           faddr_ind_a6    -       tbl_fea_mode
        short           faddr_ind_a7    -       tbl_fea_mode

        short           faddr_ind_p_a0  -       tbl_fea_mode
        short           faddr_ind_p_a1  -       tbl_fea_mode
        short           faddr_ind_p_a2  -       tbl_fea_mode
        short           faddr_ind_p_a3  -       tbl_fea_mode
        short           faddr_ind_p_a4  -       tbl_fea_mode
        short           faddr_ind_p_a5  -       tbl_fea_mode
        short           faddr_ind_p_a6  -       tbl_fea_mode
        short           faddr_ind_p_a7  -       tbl_fea_mode

        short           faddr_ind_m_a0  -       tbl_fea_mode
        short           faddr_ind_m_a1  -       tbl_fea_mode
        short           faddr_ind_m_a2  -       tbl_fea_mode
        short           faddr_ind_m_a3  -       tbl_fea_mode
        short           faddr_ind_m_a4  -       tbl_fea_mode
        short           faddr_ind_m_a5  -       tbl_fea_mode
        short           faddr_ind_m_a6  -       tbl_fea_mode
        short           faddr_ind_m_a7  -       tbl_fea_mode

        short           faddr_ind_disp_a0       -       tbl_fea_mode
        short           faddr_ind_disp_a1       -       tbl_fea_mode
        short           faddr_ind_disp_a2       -       tbl_fea_mode
        short           faddr_ind_disp_a3       -       tbl_fea_mode
        short           faddr_ind_disp_a4       -       tbl_fea_mode
        short           faddr_ind_disp_a5       -       tbl_fea_mode
        short           faddr_ind_disp_a6       -       tbl_fea_mode
        short           faddr_ind_disp_a7       -       tbl_fea_mode

        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode
        short           faddr_ind_ext   -       tbl_fea_mode

        short           fabs_short      -       tbl_fea_mode
        short           fabs_long       -       tbl_fea_mode
        short           fpc_ind         -       tbl_fea_mode
        short           fpc_ind_ext     -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode
        short           tbl_fea_mode    -       tbl_fea_mode

###################################
# Address register indirect: (An) #
###################################
faddr_ind_a0:
        mov.l           EXC_DREGS+0x8(%a6),%a0  # Get current a0
        rts

faddr_ind_a1:
        mov.l           EXC_DREGS+0xc(%a6),%a0  # Get current a1
        rts

faddr_ind_a2:
        mov.l           %a2,%a0                 # Get current a2
        rts

faddr_ind_a3:
        mov.l           %a3,%a0                 # Get current a3
        rts

faddr_ind_a4:
        mov.l           %a4,%a0                 # Get current a4
        rts

faddr_ind_a5:
        mov.l           %a5,%a0                 # Get current a5
        rts

faddr_ind_a6:
        mov.l           (%a6),%a0               # Get current a6
        rts

faddr_ind_a7:
        mov.l           EXC_A7(%a6),%a0         # Get current a7
        rts

#####################################################
# Address register indirect w/ postincrement: (An)+ #
#####################################################
faddr_ind_p_a0:
        mov.l           EXC_DREGS+0x8(%a6),%d0  # Get current a0
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,EXC_DREGS+0x8(%a6)  # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a1:
        mov.l           EXC_DREGS+0xc(%a6),%d0  # Get current a1
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,EXC_DREGS+0xc(%a6)  # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a2:
        mov.l           %a2,%d0                 # Get current a2
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,%a2                 # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a3:
        mov.l           %a3,%d0                 # Get current a3
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,%a3                 # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a4:
        mov.l           %a4,%d0                 # Get current a4
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,%a4                 # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a5:
        mov.l           %a5,%d0                 # Get current a5
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,%a5                 # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a6:
        mov.l           (%a6),%d0               # Get current a6
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,(%a6)               # Save incr value
        mov.l           %d0,%a0
        rts

faddr_ind_p_a7:
        mov.b           &mia7_flg,SPCOND_FLG(%a6) # set "special case" flag

        mov.l           EXC_A7(%a6),%d0         # Get current a7
        mov.l           %d0,%d1
        add.l           %a0,%d1                 # Increment
        mov.l           %d1,EXC_A7(%a6)         # Save incr value
        mov.l           %d0,%a0
        rts

####################################################
# Address register indirect w/ predecrement: -(An) #
####################################################
faddr_ind_m_a0:
        mov.l           EXC_DREGS+0x8(%a6),%d0  # Get current a0
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,EXC_DREGS+0x8(%a6)  # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a1:
        mov.l           EXC_DREGS+0xc(%a6),%d0  # Get current a1
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,EXC_DREGS+0xc(%a6)  # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a2:
        mov.l           %a2,%d0                 # Get current a2
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,%a2                 # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a3:
        mov.l           %a3,%d0                 # Get current a3
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,%a3                 # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a4:
        mov.l           %a4,%d0                 # Get current a4
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,%a4                 # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a5:
        mov.l           %a5,%d0                 # Get current a5
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,%a5                 # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a6:
        mov.l           (%a6),%d0               # Get current a6
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,(%a6)               # Save decr value
        mov.l           %d0,%a0
        rts

faddr_ind_m_a7:
        mov.b           &mda7_flg,SPCOND_FLG(%a6) # set "special case" flag

        mov.l           EXC_A7(%a6),%d0         # Get current a7
        sub.l           %a0,%d0                 # Decrement
        mov.l           %d0,EXC_A7(%a6)         # Save decr value
        mov.l           %d0,%a0
        rts

########################################################
# Address register indirect w/ displacement: (d16, An) #
########################################################
faddr_ind_disp_a0:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           EXC_DREGS+0x8(%a6),%a0  # a0 + d16
        rts

faddr_ind_disp_a1:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           EXC_DREGS+0xc(%a6),%a0  # a1 + d16
        rts

faddr_ind_disp_a2:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           %a2,%a0                 # a2 + d16
        rts

faddr_ind_disp_a3:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           %a3,%a0                 # a3 + d16
        rts

faddr_ind_disp_a4:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           %a4,%a0                 # a4 + d16
        rts

faddr_ind_disp_a5:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           %a5,%a0                 # a5 + d16
        rts

faddr_ind_disp_a6:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           (%a6),%a0               # a6 + d16
        rts

faddr_ind_disp_a7:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           EXC_A7(%a6),%a0         # a7 + d16
        rts

########################################################################
# Address register indirect w/ index(8-bit displacement): (d8, An, Xn) #
#    "       "         "    w/   "  (base displacement): (bd, An, Xn)  #
# Memory indirect postindexed: ([bd, An], Xn, od)                      #
# Memory indirect preindexed: ([bd, An, Xn], od)                       #
########################################################################
faddr_ind_ext:
        addq.l          &0x8,%d1
        bsr.l           fetch_dreg              # fetch base areg
        mov.l           %d0,-(%sp)

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word         # fetch extword in d0

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           (%sp)+,%a0

        btst            &0x8,%d0
        bne.w           fcalc_mem_ind

        mov.l           %d0,L_SCR1(%a6)         # hold opword

        mov.l           %d0,%d1
        rol.w           &0x4,%d1
        andi.w          &0xf,%d1                # extract index regno

# count on fetch_dreg() not to alter a0...
        bsr.l           fetch_dreg              # fetch index

        mov.l           %d2,-(%sp)              # save d2
        mov.l           L_SCR1(%a6),%d2         # fetch opword

        btst            &0xb,%d2                # is it word or long?
        bne.b           faii8_long
        ext.l           %d0                     # sign extend word index
faii8_long:
        mov.l           %d2,%d1
        rol.w           &0x7,%d1
        andi.l          &0x3,%d1                # extract scale value

        lsl.l           %d1,%d0                 # shift index by scale

        extb.l          %d2                     # sign extend displacement
        add.l           %d2,%d0                 # index + disp
        add.l           %d0,%a0                 # An + (index + disp)

        mov.l           (%sp)+,%d2              # restore old d2
        rts

###########################
# Absolute short: (XXX).W #
###########################
fabs_short:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word         # fetch short address

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # return <ea> in a0
        rts

##########################
# Absolute long: (XXX).L #
##########################
fabs_long:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch long address

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,%a0                 # return <ea> in a0
        rts

#######################################################
# Program counter indirect w/ displacement: (d16, PC) #
#######################################################
fpc_ind:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word         # fetch word displacement

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.w           %d0,%a0                 # sign extend displacement

        add.l           EXC_EXTWPTR(%a6),%a0    # pc + d16

# _imem_read_word() increased the extwptr by 2. need to adjust here.
        subq.l          &0x2,%a0                # adjust <ea>
        rts

##########################################################
# PC indirect w/ index(8-bit displacement): (d8, PC, An) #
# "     "     w/   "  (base displacement): (bd, PC, An)  #
# PC memory indirect postindexed: ([bd, PC], Xn, od)     #
# PC memory indirect preindexed: ([bd, PC, Xn], od)      #
##########################################################
fpc_ind_ext:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word         # fetch ext word

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           EXC_EXTWPTR(%a6),%a0    # put base in a0
        subq.l          &0x2,%a0                # adjust base

        btst            &0x8,%d0                # is disp only 8 bits?
        bne.w           fcalc_mem_ind           # calc memory indirect

        mov.l           %d0,L_SCR1(%a6)         # store opword

        mov.l           %d0,%d1                 # make extword copy
        rol.w           &0x4,%d1                # rotate reg num into place
        andi.w          &0xf,%d1                # extract register number

# count on fetch_dreg() not to alter a0...
        bsr.l           fetch_dreg              # fetch index

        mov.l           %d2,-(%sp)              # save d2
        mov.l           L_SCR1(%a6),%d2         # fetch opword

        btst            &0xb,%d2                # is index word or long?
        bne.b           fpii8_long              # long
        ext.l           %d0                     # sign extend word index
fpii8_long:
        mov.l           %d2,%d1
        rol.w           &0x7,%d1                # rotate scale value into place
        andi.l          &0x3,%d1                # extract scale value

        lsl.l           %d1,%d0                 # shift index by scale

        extb.l          %d2                     # sign extend displacement
        add.l           %d2,%d0                 # disp + index
        add.l           %d0,%a0                 # An + (index + disp)

        mov.l           (%sp)+,%d2              # restore temp register
        rts

# d2 = index
# d3 = base
# d4 = od
# d5 = extword
fcalc_mem_ind:
        btst            &0x6,%d0                # is the index suppressed?
        beq.b           fcalc_index

        movm.l          &0x3c00,-(%sp)          # save d2-d5

        mov.l           %d0,%d5                 # put extword in d5
        mov.l           %a0,%d3                 # put base in d3

        clr.l           %d2                     # yes, so index = 0
        bra.b           fbase_supp_ck

# index:
fcalc_index:
        mov.l           %d0,L_SCR1(%a6)         # save d0 (opword)
        bfextu          %d0{&16:&4},%d1         # fetch dreg index
        bsr.l           fetch_dreg

        movm.l          &0x3c00,-(%sp)          # save d2-d5
        mov.l           %d0,%d2                 # put index in d2
        mov.l           L_SCR1(%a6),%d5
        mov.l           %a0,%d3

        btst            &0xb,%d5                # is index word or long?
        bne.b           fno_ext
        ext.l           %d2

fno_ext:
        bfextu          %d5{&21:&2},%d0
        lsl.l           %d0,%d2

# base address (passed as parameter in d3):
# we clear the value here if it should actually be suppressed.
fbase_supp_ck:
        btst            &0x7,%d5                # is the bd suppressed?
        beq.b           fno_base_sup
        clr.l           %d3

# base displacement:
fno_base_sup:
        bfextu          %d5{&26:&2},%d0         # get bd size
#       beq.l           fmovm_error             # if (size == 0) it's reserved

        cmpi.b          %d0,&0x2
        blt.b           fno_bd
        beq.b           fget_word_bd

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long

        tst.l           %d1                     # did ifetch fail?
        bne.l           fcea_iacc               # yes

        bra.b           fchk_ind

fget_word_bd:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           fcea_iacc               # yes

        ext.l           %d0                     # sign extend bd

fchk_ind:
        add.l           %d0,%d3                 # base += bd

# outer displacement:
fno_bd:
        bfextu          %d5{&30:&2},%d0         # is od suppressed?
        beq.w           faii_bd

        cmpi.b          %d0,&0x2
        blt.b           fnull_od
        beq.b           fword_od

        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long

        tst.l           %d1                     # did ifetch fail?
        bne.l           fcea_iacc               # yes

        bra.b           fadd_them

fword_od:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x2,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_word

        tst.l           %d1                     # did ifetch fail?
        bne.l           fcea_iacc               # yes

        ext.l           %d0                     # sign extend od
        bra.b           fadd_them

fnull_od:
        clr.l           %d0

fadd_them:
        mov.l           %d0,%d4

        btst            &0x2,%d5                # pre or post indexing?
        beq.b           fpre_indexed

        mov.l           %d3,%a0
        bsr.l           _dmem_read_long

        tst.l           %d1                     # did dfetch fail?
        bne.w           fcea_err                # yes

        add.l           %d2,%d0                 # <ea> += index
        add.l           %d4,%d0                 # <ea> += od
        bra.b           fdone_ea

fpre_indexed:
        add.l           %d2,%d3                 # preindexing
        mov.l           %d3,%a0
        bsr.l           _dmem_read_long

        tst.l           %d1                     # did dfetch fail?
        bne.w           fcea_err                # yes

        add.l           %d4,%d0                 # ea += od
        bra.b           fdone_ea

faii_bd:
        add.l           %d2,%d3                 # ea = (base + bd) + index
        mov.l           %d3,%d0
fdone_ea:
        mov.l           %d0,%a0

        movm.l          (%sp)+,&0x003c          # restore d2-d5
        rts

#########################################################
fcea_err:
        mov.l           %d3,%a0

        movm.l          (%sp)+,&0x003c          # restore d2-d5
        mov.w           &0x0101,%d0
        bra.l           iea_dacc

fcea_iacc:
        movm.l          (%sp)+,&0x003c          # restore d2-d5
        bra.l           iea_iacc

fmovm_out_err:
        bsr.l           restore
        mov.w           &0x00e1,%d0
        bra.b           fmovm_err

fmovm_in_err:
        bsr.l           restore
        mov.w           &0x0161,%d0

fmovm_err:
        mov.l           L_SCR1(%a6),%a0
        bra.l           iea_dacc

#########################################################################
# XDEF **************************************************************** #
#       fmovm_ctrl(): emulate fmovm.l of control registers instr        #
#                                                                       #
# XREF **************************************************************** #
#       _imem_read_long() - read longword from memory                   #
#       iea_iacc() - _imem_read_long() failed; error recovery           #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       If _imem_read_long() doesn't fail:                              #
#               USER_FPCR(a6)  = new FPCR value                         #
#               USER_FPSR(a6)  = new FPSR value                         #
#               USER_FPIAR(a6) = new FPIAR value                        #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Decode the instruction type by looking at the extension word    #
# in order to see how many control registers to fetch from memory.      #
# Fetch them using _imem_read_long(). If this fetch fails, exit through #
# the special access error exit handler iea_iacc().                     #
#                                                                       #
# Instruction word decoding:                                            #
#                                                                       #
#       fmovem.l #<data>, {FPIAR&|FPCR&|FPSR}                           #
#                                                                       #
#               WORD1                   WORD2                           #
#       1111 0010 00 111100     100$ $$00 0000 0000                     #
#                                                                       #
#       $$$ (100): FPCR                                                 #
#           (010): FPSR                                                 #
#           (001): FPIAR                                                #
#           (000): FPIAR                                                #
#                                                                       #
#########################################################################

        global          fmovm_ctrl
fmovm_ctrl:
        mov.b           EXC_EXTWORD(%a6),%d0    # fetch reg select bits
        cmpi.b          %d0,&0x9c               # fpcr & fpsr & fpiar ?
        beq.w           fctrl_in_7              # yes
        cmpi.b          %d0,&0x98               # fpcr & fpsr ?
        beq.w           fctrl_in_6              # yes
        cmpi.b          %d0,&0x94               # fpcr & fpiar ?
        beq.b           fctrl_in_5              # yes

# fmovem.l #<data>, fpsr/fpiar
fctrl_in_3:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPSR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPSR(%a6)      # store new FPSR to stack
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPIAR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPIAR(%a6)     # store new FPIAR to stack
        rts

# fmovem.l #<data>, fpcr/fpiar
fctrl_in_5:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPCR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPCR(%a6)      # store new FPCR to stack
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPIAR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPIAR(%a6)     # store new FPIAR to stack
        rts

# fmovem.l #<data>, fpcr/fpsr
fctrl_in_6:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPCR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPCR(%a6)      # store new FPCR to mem
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPSR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPSR(%a6)      # store new FPSR to mem
        rts

# fmovem.l #<data>, fpcr/fpsr/fpiar
fctrl_in_7:
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPCR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPCR(%a6)      # store new FPCR to mem
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPSR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPSR(%a6)      # store new FPSR to mem
        mov.l           EXC_EXTWPTR(%a6),%a0    # fetch instruction addr
        addq.l          &0x4,EXC_EXTWPTR(%a6)   # incr instruction ptr
        bsr.l           _imem_read_long         # fetch FPIAR from mem

        tst.l           %d1                     # did ifetch fail?
        bne.l           iea_iacc                # yes

        mov.l           %d0,USER_FPIAR(%a6)     # store new FPIAR to mem
        rts

#########################################################################
# XDEF **************************************************************** #
#       _dcalc_ea(): calc correct <ea> from <ea> stacked on exception   #
#                                                                       #
# XREF **************************************************************** #
#       inc_areg() - increment an address register                      #
#       dec_areg() - decrement an address register                      #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = number of bytes to adjust <ea> by                          #
#                                                                       #
# OUTPUT ************************************************************** #
#       None                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
# "Dummy" CALCulate Effective Address:                                  #
#       The stacked <ea> for FP unimplemented instructions and opclass  #
#       two packed instructions is correct with the exception of...     #
#                                                                       #
#       1) -(An)   : The register is not updated regardless of size.    #
#                    Also, for extended precision and packed, the       #
#                    stacked <ea> value is 8 bytes too big              #
#       2) (An)+   : The register is not updated.                       #
#       3) #<data> : The upper longword of the immediate operand is     #
#                    stacked b,w,l and s sizes are completely stacked.  #
#                    d,x, and p are not.                                #
#                                                                       #
#########################################################################

        global          _dcalc_ea
_dcalc_ea:
        mov.l           %d0, %a0                # move # bytes to %a0

        mov.b           1+EXC_OPWORD(%a6), %d0  # fetch opcode word
        mov.l           %d0, %d1                # make a copy

        andi.w          &0x38, %d0              # extract mode field
        andi.l          &0x7, %d1               # extract reg  field

        cmpi.b          %d0,&0x18               # is mode (An)+ ?
        beq.b           dcea_pi                 # yes

        cmpi.b          %d0,&0x20               # is mode -(An) ?
        beq.b           dcea_pd                 # yes

        or.w            %d1,%d0                 # concat mode,reg
        cmpi.b          %d0,&0x3c               # is mode #<data>?

        beq.b           dcea_imm                # yes

        mov.l           EXC_EA(%a6),%a0         # return <ea>
        rts

# need to set immediate data flag here since we'll need to do
# an imem_read to fetch this later.
dcea_imm:
        mov.b           &immed_flg,SPCOND_FLG(%a6)
        lea             ([USER_FPIAR,%a6],0x4),%a0 # no; return <ea>
        rts

# here, the <ea> is stacked correctly. however, we must update the
# address register...
dcea_pi:
        mov.l           %a0,%d0                 # pass amt to inc by
        bsr.l           inc_areg                # inc addr register

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        rts

# the <ea> is stacked correctly for all but extended and packed which
# the <ea>s are 8 bytes too large.
# it would make no sense to have a pre-decrement to a7 in supervisor
# mode so we don't even worry about this tricky case here : )
dcea_pd:
        mov.l           %a0,%d0                 # pass amt to dec by
        bsr.l           dec_areg                # dec addr register

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct

        cmpi.b          %d0,&0xc                # is opsize ext or packed?
        beq.b           dcea_pd2                # yes
        rts
dcea_pd2:
        sub.l           &0x8,%a0                # correct <ea>
        mov.l           %a0,EXC_EA(%a6)         # put correct <ea> on stack
        rts

#########################################################################
# XDEF **************************************************************** #
#       _calc_ea_fout(): calculate correct stacked <ea> for extended    #
#                        and packed data opclass 3 operations.          #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0 = return correct effective address                           #
#                                                                       #
# ALGORITHM *********************************************************** #
#       For opclass 3 extended and packed data operations, the <ea>     #
# stacked for the exception is incorrect for -(an) and (an)+ addressing #
# modes. Also, while we're at it, the index register itself must get    #
# updated.                                                              #
#       So, for -(an), we must subtract 8 off of the stacked <ea> value #
# and return that value as the correct <ea> and store that value in An. #
# For (an)+, the stacked <ea> is correct but we must adjust An by +12.  #
#                                                                       #
#########################################################################

# This calc_ea is currently used to retrieve the correct <ea>
# for fmove outs of type extended and packed.
        global          _calc_ea_fout
_calc_ea_fout:
        mov.b           1+EXC_OPWORD(%a6),%d0   # fetch opcode word
        mov.l           %d0,%d1                 # make a copy

        andi.w          &0x38,%d0               # extract mode field
        andi.l          &0x7,%d1                # extract reg  field

        cmpi.b          %d0,&0x18               # is mode (An)+ ?
        beq.b           ceaf_pi                 # yes

        cmpi.b          %d0,&0x20               # is mode -(An) ?
        beq.w           ceaf_pd                 # yes

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        rts

# (An)+ : extended and packed fmove out
#       : stacked <ea> is correct
#       : "An" not updated
ceaf_pi:
        mov.w           (tbl_ceaf_pi.b,%pc,%d1.w*2),%d1
        mov.l           EXC_EA(%a6),%a0
        jmp             (tbl_ceaf_pi.b,%pc,%d1.w*1)

        swbeg           &0x8
tbl_ceaf_pi:
        short           ceaf_pi0 - tbl_ceaf_pi
        short           ceaf_pi1 - tbl_ceaf_pi
        short           ceaf_pi2 - tbl_ceaf_pi
        short           ceaf_pi3 - tbl_ceaf_pi
        short           ceaf_pi4 - tbl_ceaf_pi
        short           ceaf_pi5 - tbl_ceaf_pi
        short           ceaf_pi6 - tbl_ceaf_pi
        short           ceaf_pi7 - tbl_ceaf_pi

ceaf_pi0:
        addi.l          &0xc,EXC_DREGS+0x8(%a6)
        rts
ceaf_pi1:
        addi.l          &0xc,EXC_DREGS+0xc(%a6)
        rts
ceaf_pi2:
        add.l           &0xc,%a2
        rts
ceaf_pi3:
        add.l           &0xc,%a3
        rts
ceaf_pi4:
        add.l           &0xc,%a4
        rts
ceaf_pi5:
        add.l           &0xc,%a5
        rts
ceaf_pi6:
        addi.l          &0xc,EXC_A6(%a6)
        rts
ceaf_pi7:
        mov.b           &mia7_flg,SPCOND_FLG(%a6)
        addi.l          &0xc,EXC_A7(%a6)
        rts

# -(An) : extended and packed fmove out
#       : stacked <ea> = actual <ea> + 8
#       : "An" not updated
ceaf_pd:
        mov.w           (tbl_ceaf_pd.b,%pc,%d1.w*2),%d1
        mov.l           EXC_EA(%a6),%a0
        sub.l           &0x8,%a0
        sub.l           &0x8,EXC_EA(%a6)
        jmp             (tbl_ceaf_pd.b,%pc,%d1.w*1)

        swbeg           &0x8
tbl_ceaf_pd:
        short           ceaf_pd0 - tbl_ceaf_pd
        short           ceaf_pd1 - tbl_ceaf_pd
        short           ceaf_pd2 - tbl_ceaf_pd
        short           ceaf_pd3 - tbl_ceaf_pd
        short           ceaf_pd4 - tbl_ceaf_pd
        short           ceaf_pd5 - tbl_ceaf_pd
        short           ceaf_pd6 - tbl_ceaf_pd
        short           ceaf_pd7 - tbl_ceaf_pd

ceaf_pd0:
        mov.l           %a0,EXC_DREGS+0x8(%a6)
        rts
ceaf_pd1:
        mov.l           %a0,EXC_DREGS+0xc(%a6)
        rts
ceaf_pd2:
        mov.l           %a0,%a2
        rts
ceaf_pd3:
        mov.l           %a0,%a3
        rts
ceaf_pd4:
        mov.l           %a0,%a4
        rts
ceaf_pd5:
        mov.l           %a0,%a5
        rts
ceaf_pd6:
        mov.l           %a0,EXC_A6(%a6)
        rts
ceaf_pd7:
        mov.l           %a0,EXC_A7(%a6)
        mov.b           &mda7_flg,SPCOND_FLG(%a6)
        rts

#########################################################################
# XDEF **************************************************************** #
#       _load_fop(): load operand for unimplemented FP exception        #
#                                                                       #
# XREF **************************************************************** #
#       set_tag_x() - determine ext prec optype tag                     #
#       set_tag_s() - determine sgl prec optype tag                     #
#       set_tag_d() - determine dbl prec optype tag                     #
#       unnorm_fix() - convert normalized number to denorm or zero      #
#       norm() - normalize a denormalized number                        #
#       get_packed() - fetch a packed operand from memory               #
#       _dcalc_ea() - calculate <ea>, fixing An in process              #
#                                                                       #
#       _imem_read_{word,long}() - read from instruction memory         #
#       _dmem_read() - read from data memory                            #
#       _dmem_read_{byte,word,long}() - read from data memory           #
#                                                                       #
#       facc_in_{b,w,l,d,x}() - mem read failed; special exit point     #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       If memory access doesn't fail:                                  #
#               FP_SRC(a6) = source operand in extended precision       #
#               FP_DST(a6) = destination operand in extended precision  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This is called from the Unimplemented FP exception handler in   #
# order to load the source and maybe destination operand into           #
# FP_SRC(a6) and FP_DST(a6). If the instruction was opclass zero, load  #
# the source and destination from the FP register file. Set the optype  #
# tags for both if dyadic, one for monadic. If a number is an UNNORM,   #
# convert it to a DENORM or a ZERO.                                     #
#       If the instruction is opclass two (memory->reg), then fetch     #
# the destination from the register file and the source operand from    #
# memory. Tag and fix both as above w/ opclass zero instructions.       #
#       If the source operand is byte,word,long, or single, it may be   #
# in the data register file. If it's actually out in memory, use one of #
# the mem_read() routines to fetch it. If the mem_read() access returns #
# a failing value, exit through the special facc_in() routine which     #
# will create an access error exception frame from the current exception #
# frame.                                                                #
#       Immediate data and regular data accesses are separated because  #
# if an immediate data access fails, the resulting fault status         #
# longword stacked for the access error exception must have the         #
# instruction bit set.                                                  #
#                                                                       #
#########################################################################

        global          _load_fop
_load_fop:

#  15     13 12 10  9 7  6       0
# /        \ /   \ /  \ /         \
# ---------------------------------
# | opclass | RX  | RY | EXTENSION |  (2nd word of general FP instruction)
# ---------------------------------
#

#       bfextu          EXC_CMDREG(%a6){&0:&3}, %d0 # extract opclass
#       cmpi.b          %d0, &0x2               # which class is it? ('000,'010,'011)
#       beq.w           op010                   # handle <ea> -> fpn
#       bgt.w           op011                   # handle fpn -> <ea>

# we're not using op011 for now...
        btst            &0x6,EXC_CMDREG(%a6)
        bne.b           op010

############################
# OPCLASS '000: reg -> reg #
############################
op000:
        mov.b           1+EXC_CMDREG(%a6),%d0   # fetch extension word lo
        btst            &0x5,%d0                # testing extension bits
        beq.b           op000_src               # (bit 5 == 0) => monadic
        btst            &0x4,%d0                # (bit 5 == 1)
        beq.b           op000_dst               # (bit 4 == 0) => dyadic
        and.w           &0x007f,%d0             # extract extension bits {6:0}
        cmpi.w          %d0,&0x0038             # is it an fcmp (dyadic) ?
        bne.b           op000_src               # it's an fcmp

op000_dst:
        bfextu          EXC_CMDREG(%a6){&6:&3}, %d0 # extract dst field
        bsr.l           load_fpn2               # fetch dst fpreg into FP_DST

        bsr.l           set_tag_x               # get dst optype tag

        cmpi.b          %d0, &UNNORM            # is dst fpreg an UNNORM?
        beq.b           op000_dst_unnorm        # yes
op000_dst_cont:
        mov.b           %d0, DTAG(%a6)          # store the dst optype tag

op000_src:
        bfextu          EXC_CMDREG(%a6){&3:&3}, %d0 # extract src field
        bsr.l           load_fpn1               # fetch src fpreg into FP_SRC

        bsr.l           set_tag_x               # get src optype tag

        cmpi.b          %d0, &UNNORM            # is src fpreg an UNNORM?
        beq.b           op000_src_unnorm        # yes
op000_src_cont:
        mov.b           %d0, STAG(%a6)          # store the src optype tag
        rts

op000_dst_unnorm:
        bsr.l           unnorm_fix              # fix the dst UNNORM
        bra.b           op000_dst_cont
op000_src_unnorm:
        bsr.l           unnorm_fix              # fix the src UNNORM
        bra.b           op000_src_cont

#############################
# OPCLASS '010: <ea> -> reg #
#############################
op010:
        mov.w           EXC_CMDREG(%a6),%d0     # fetch extension word
        btst            &0x5,%d0                # testing extension bits
        beq.b           op010_src               # (bit 5 == 0) => monadic
        btst            &0x4,%d0                # (bit 5 == 1)
        beq.b           op010_dst               # (bit 4 == 0) => dyadic
        and.w           &0x007f,%d0             # extract extension bits {6:0}
        cmpi.w          %d0,&0x0038             # is it an fcmp (dyadic) ?
        bne.b           op010_src               # it's an fcmp

op010_dst:
        bfextu          EXC_CMDREG(%a6){&6:&3}, %d0 # extract dst field
        bsr.l           load_fpn2               # fetch dst fpreg ptr

        bsr.l           set_tag_x               # get dst type tag

        cmpi.b          %d0, &UNNORM            # is dst fpreg an UNNORM?
        beq.b           op010_dst_unnorm        # yes
op010_dst_cont:
        mov.b           %d0, DTAG(%a6)          # store the dst optype tag

op010_src:
        bfextu          EXC_CMDREG(%a6){&3:&3}, %d0 # extract src type field

        bfextu          EXC_OPWORD(%a6){&10:&3}, %d1 # extract <ea> mode field
        bne.w           fetch_from_mem          # src op is in memory

op010_dreg:
        clr.b           STAG(%a6)               # either NORM or ZERO
        bfextu          EXC_OPWORD(%a6){&13:&3}, %d1 # extract src reg field

        mov.w           (tbl_op010_dreg.b,%pc,%d0.w*2), %d0 # jmp based on optype
        jmp             (tbl_op010_dreg.b,%pc,%d0.w*1) # fetch src from dreg

op010_dst_unnorm:
        bsr.l           unnorm_fix              # fix the dst UNNORM
        bra.b           op010_dst_cont

        swbeg           &0x8
tbl_op010_dreg:
        short           opd_long        - tbl_op010_dreg
        short           opd_sgl         - tbl_op010_dreg
        short           tbl_op010_dreg  - tbl_op010_dreg
        short           tbl_op010_dreg  - tbl_op010_dreg
        short           opd_word        - tbl_op010_dreg
        short           tbl_op010_dreg  - tbl_op010_dreg
        short           opd_byte        - tbl_op010_dreg
        short           tbl_op010_dreg  - tbl_op010_dreg

#
# LONG: can be either NORM or ZERO...
#
opd_long:
        bsr.l           fetch_dreg              # fetch long in d0
        fmov.l          %d0, %fp0               # load a long
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        fbeq.w          opd_long_zero           # long is a ZERO
        rts
opd_long_zero:
        mov.b           &ZERO, STAG(%a6)        # set ZERO optype flag
        rts

#
# WORD: can be either NORM or ZERO...
#
opd_word:
        bsr.l           fetch_dreg              # fetch word in d0
        fmov.w          %d0, %fp0               # load a word
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        fbeq.w          opd_word_zero           # WORD is a ZERO
        rts
opd_word_zero:
        mov.b           &ZERO, STAG(%a6)        # set ZERO optype flag
        rts

#
# BYTE: can be either NORM or ZERO...
#
opd_byte:
        bsr.l           fetch_dreg              # fetch word in d0
        fmov.b          %d0, %fp0               # load a byte
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        fbeq.w          opd_byte_zero           # byte is a ZERO
        rts
opd_byte_zero:
        mov.b           &ZERO, STAG(%a6)        # set ZERO optype flag
        rts

#
# SGL: can be either NORM, DENORM, ZERO, INF, QNAN or SNAN but not UNNORM
#
# separate SNANs and DENORMs so they can be loaded w/ special care.
# all others can simply be moved "in" using fmove.
#
opd_sgl:
        bsr.l           fetch_dreg              # fetch sgl in d0
        mov.l           %d0,L_SCR1(%a6)

        lea             L_SCR1(%a6), %a0        # pass: ptr to the sgl
        bsr.l           set_tag_s               # determine sgl type
        mov.b           %d0, STAG(%a6)          # save the src tag

        cmpi.b          %d0, &SNAN              # is it an SNAN?
        beq.w           get_sgl_snan            # yes

        cmpi.b          %d0, &DENORM            # is it a DENORM?
        beq.w           get_sgl_denorm          # yes

        fmov.s          (%a0), %fp0             # no, so can load it regular
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        rts

##############################################################################

#########################################################################
# fetch_from_mem():                                                     #
# - src is out in memory. must:                                         #
#       (1) calc ea - must read AFTER you know the src type since       #
#                     if the ea is -() or ()+, need to know # of bytes. #
#       (2) read it in from either user or supervisor space             #
#       (3) if (b || w || l) then simply read in                        #
#           if (s || d || x) then check for SNAN,UNNORM,DENORM          #
#           if (packed) then punt for now                               #
# INPUT:                                                                #
#       %d0 : src type field                                            #
#########################################################################
fetch_from_mem:
        clr.b           STAG(%a6)               # either NORM or ZERO

        mov.w           (tbl_fp_type.b,%pc,%d0.w*2), %d0 # index by src type field
        jmp             (tbl_fp_type.b,%pc,%d0.w*1)

        swbeg           &0x8
tbl_fp_type:
        short           load_long       - tbl_fp_type
        short           load_sgl        - tbl_fp_type
        short           load_ext        - tbl_fp_type
        short           load_packed     - tbl_fp_type
        short           load_word       - tbl_fp_type
        short           load_dbl        - tbl_fp_type
        short           load_byte       - tbl_fp_type
        short           tbl_fp_type     - tbl_fp_type

#########################################
# load a LONG into %fp0:                #
#       -number can't fault             #
#       (1) calc ea                     #
#       (2) read 4 bytes into L_SCR1    #
#       (3) fmov.l into %fp0            #
#########################################
load_long:
        movq.l          &0x4, %d0               # pass: 4 (bytes)
        bsr.l           _dcalc_ea               # calc <ea>; <ea> in %a0

        cmpi.b          SPCOND_FLG(%a6),&immed_flg
        beq.b           load_long_immed

        bsr.l           _dmem_read_long         # fetch src operand from memory

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_l               # yes

load_long_cont:
        fmov.l          %d0, %fp0               # read into %fp0;convert to xprec
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC

        fbeq.w          load_long_zero          # src op is a ZERO
        rts
load_long_zero:
        mov.b           &ZERO, STAG(%a6)        # set optype tag to ZERO
        rts

load_long_immed:
        bsr.l           _imem_read_long         # fetch src operand immed data

        tst.l           %d1                     # did ifetch fail?
        bne.l           funimp_iacc             # yes
        bra.b           load_long_cont

#########################################
# load a WORD into %fp0:                #
#       -number can't fault             #
#       (1) calc ea                     #
#       (2) read 2 bytes into L_SCR1    #
#       (3) fmov.w into %fp0            #
#########################################
load_word:
        movq.l          &0x2, %d0               # pass: 2 (bytes)
        bsr.l           _dcalc_ea               # calc <ea>; <ea> in %a0

        cmpi.b          SPCOND_FLG(%a6),&immed_flg
        beq.b           load_word_immed

        bsr.l           _dmem_read_word         # fetch src operand from memory

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_w               # yes

load_word_cont:
        fmov.w          %d0, %fp0               # read into %fp0;convert to xprec
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC

        fbeq.w          load_word_zero          # src op is a ZERO
        rts
load_word_zero:
        mov.b           &ZERO, STAG(%a6)        # set optype tag to ZERO
        rts

load_word_immed:
        bsr.l           _imem_read_word         # fetch src operand immed data

        tst.l           %d1                     # did ifetch fail?
        bne.l           funimp_iacc             # yes
        bra.b           load_word_cont

#########################################
# load a BYTE into %fp0:                #
#       -number can't fault             #
#       (1) calc ea                     #
#       (2) read 1 byte into L_SCR1     #
#       (3) fmov.b into %fp0            #
#########################################
load_byte:
        movq.l          &0x1, %d0               # pass: 1 (byte)
        bsr.l           _dcalc_ea               # calc <ea>; <ea> in %a0

        cmpi.b          SPCOND_FLG(%a6),&immed_flg
        beq.b           load_byte_immed

        bsr.l           _dmem_read_byte         # fetch src operand from memory

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_b               # yes

load_byte_cont:
        fmov.b          %d0, %fp0               # read into %fp0;convert to xprec
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC

        fbeq.w          load_byte_zero          # src op is a ZERO
        rts
load_byte_zero:
        mov.b           &ZERO, STAG(%a6)        # set optype tag to ZERO
        rts

load_byte_immed:
        bsr.l           _imem_read_word         # fetch src operand immed data

        tst.l           %d1                     # did ifetch fail?
        bne.l           funimp_iacc             # yes
        bra.b           load_byte_cont

#########################################
# load a SGL into %fp0:                 #
#       -number can't fault             #
#       (1) calc ea                     #
#       (2) read 4 bytes into L_SCR1    #
#       (3) fmov.s into %fp0            #
#########################################
load_sgl:
        movq.l          &0x4, %d0               # pass: 4 (bytes)
        bsr.l           _dcalc_ea               # calc <ea>; <ea> in %a0

        cmpi.b          SPCOND_FLG(%a6),&immed_flg
        beq.b           load_sgl_immed

        bsr.l           _dmem_read_long         # fetch src operand from memory
        mov.l           %d0, L_SCR1(%a6)        # store src op on stack

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_l               # yes

load_sgl_cont:
        lea             L_SCR1(%a6), %a0        # pass: ptr to sgl src op
        bsr.l           set_tag_s               # determine src type tag
        mov.b           %d0, STAG(%a6)          # save src optype tag on stack

        cmpi.b          %d0, &DENORM            # is it a sgl DENORM?
        beq.w           get_sgl_denorm          # yes

        cmpi.b          %d0, &SNAN              # is it a sgl SNAN?
        beq.w           get_sgl_snan            # yes

        fmov.s          L_SCR1(%a6), %fp0       # read into %fp0;convert to xprec
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        rts

load_sgl_immed:
        bsr.l           _imem_read_long         # fetch src operand immed data

        tst.l           %d1                     # did ifetch fail?
        bne.l           funimp_iacc             # yes
        bra.b           load_sgl_cont

# must convert sgl denorm format to an Xprec denorm fmt suitable for
# normalization...
# %a0 : points to sgl denorm
get_sgl_denorm:
        clr.w           FP_SRC_EX(%a6)
        bfextu          (%a0){&9:&23}, %d0      # fetch sgl hi(_mantissa)
        lsl.l           &0x8, %d0
        mov.l           %d0, FP_SRC_HI(%a6)     # set ext hi(_mantissa)
        clr.l           FP_SRC_LO(%a6)          # set ext lo(_mantissa)

        clr.w           FP_SRC_EX(%a6)
        btst            &0x7, (%a0)             # is sgn bit set?
        beq.b           sgl_dnrm_norm
        bset            &0x7, FP_SRC_EX(%a6)    # set sgn of xprec value

sgl_dnrm_norm:
        lea             FP_SRC(%a6), %a0
        bsr.l           norm                    # normalize number
        mov.w           &0x3f81, %d1            # xprec exp = 0x3f81
        sub.w           %d0, %d1                # exp = 0x3f81 - shft amt.
        or.w            %d1, FP_SRC_EX(%a6)     # {sgn,exp}

        mov.b           &NORM, STAG(%a6)        # fix src type tag
        rts

# convert sgl to ext SNAN
# %a0 : points to sgl SNAN
get_sgl_snan:
        mov.w           &0x7fff, FP_SRC_EX(%a6) # set exp of SNAN
        bfextu          (%a0){&9:&23}, %d0
        lsl.l           &0x8, %d0               # extract and insert hi(man)
        mov.l           %d0, FP_SRC_HI(%a6)
        clr.l           FP_SRC_LO(%a6)

        btst            &0x7, (%a0)             # see if sign of SNAN is set
        beq.b           no_sgl_snan_sgn
        bset            &0x7, FP_SRC_EX(%a6)
no_sgl_snan_sgn:
        rts

#########################################
# load a DBL into %fp0:                 #
#       -number can't fault             #
#       (1) calc ea                     #
#       (2) read 8 bytes into L_SCR(1,2)#
#       (3) fmov.d into %fp0            #
#########################################
load_dbl:
        movq.l          &0x8, %d0               # pass: 8 (bytes)
        bsr.l           _dcalc_ea               # calc <ea>; <ea> in %a0

        cmpi.b          SPCOND_FLG(%a6),&immed_flg
        beq.b           load_dbl_immed

        lea             L_SCR1(%a6), %a1        # pass: ptr to input dbl tmp space
        movq.l          &0x8, %d0               # pass: # bytes to read
        bsr.l           _dmem_read              # fetch src operand from memory

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_d               # yes

load_dbl_cont:
        lea             L_SCR1(%a6), %a0        # pass: ptr to input dbl
        bsr.l           set_tag_d               # determine src type tag
        mov.b           %d0, STAG(%a6)          # set src optype tag

        cmpi.b          %d0, &DENORM            # is it a dbl DENORM?
        beq.w           get_dbl_denorm          # yes

        cmpi.b          %d0, &SNAN              # is it a dbl SNAN?
        beq.w           get_dbl_snan            # yes

        fmov.d          L_SCR1(%a6), %fp0       # read into %fp0;convert to xprec
        fmovm.x         &0x80, FP_SRC(%a6)      # return src op in FP_SRC
        rts

load_dbl_immed:
        lea             L_SCR1(%a6), %a1        # pass: ptr to input dbl tmp space
        movq.l          &0x8, %d0               # pass: # bytes to read
        bsr.l           _imem_read              # fetch src operand from memory

        tst.l           %d1                     # did ifetch fail?
        bne.l           funimp_iacc             # yes
        bra.b           load_dbl_cont

# must convert dbl denorm format to an Xprec denorm fmt suitable for
# normalization...
# %a0 : loc. of dbl denorm
get_dbl_denorm:
        clr.w           FP_SRC_EX(%a6)
        bfextu          (%a0){&12:&31}, %d0     # fetch hi(_mantissa)
        mov.l           %d0, FP_SRC_HI(%a6)
        bfextu          4(%a0){&11:&21}, %d0    # fetch lo(_mantissa)
        mov.l           &0xb, %d1
        lsl.l           %d1, %d0
        mov.l           %d0, FP_SRC_LO(%a6)

        btst            &0x7, (%a0)             # is sgn bit set?
        beq.b           dbl_dnrm_norm
        bset            &0x7, FP_SRC_EX(%a6)    # set sgn of xprec value

dbl_dnrm_norm:
        lea             FP_SRC(%a6), %a0
        bsr.l           norm                    # normalize number
        mov.w           &0x3c01, %d1            # xprec exp = 0x3c01
        sub.w           %d0, %d1                # exp = 0x3c01 - shft amt.
        or.w            %d1, FP_SRC_EX(%a6)     # {sgn,exp}

        mov.b           &NORM, STAG(%a6)        # fix src type tag
        rts

# convert dbl to ext SNAN
# %a0 : points to dbl SNAN
get_dbl_snan:
        mov.w           &0x7fff, FP_SRC_EX(%a6) # set exp of SNAN

        bfextu          (%a0){&12:&31}, %d0     # fetch hi(_mantissa)
        mov.l           %d0, FP_SRC_HI(%a6)
        bfextu          4(%a0){&11:&21}, %d0    # fetch lo(_mantissa)
        mov.l           &0xb, %d1
        lsl.l           %d1, %d0
        mov.l           %d0, FP_SRC_LO(%a6)

        btst            &0x7, (%a0)             # see if sign of SNAN is set
        beq.b           no_dbl_snan_sgn
        bset            &0x7, FP_SRC_EX(%a6)
no_dbl_snan_sgn:
        rts

#################################################
# load a Xprec into %fp0:                       #
#       -number can't fault                     #
#       (1) calc ea                             #
#       (2) read 12 bytes into L_SCR(1,2)       #
#       (3) fmov.x into %fp0                    #
#################################################
load_ext:
        mov.l           &0xc, %d0               # pass: 12 (bytes)
        bsr.l           _dcalc_ea               # calc <ea>

        lea             FP_SRC(%a6), %a1        # pass: ptr to input ext tmp space
        mov.l           &0xc, %d0               # pass: # of bytes to read
        bsr.l           _dmem_read              # fetch src operand from memory

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_x               # yes

        lea             FP_SRC(%a6), %a0        # pass: ptr to src op
        bsr.l           set_tag_x               # determine src type tag

        cmpi.b          %d0, &UNNORM            # is the src op an UNNORM?
        beq.b           load_ext_unnorm         # yes

        mov.b           %d0, STAG(%a6)          # store the src optype tag
        rts

load_ext_unnorm:
        bsr.l           unnorm_fix              # fix the src UNNORM
        mov.b           %d0, STAG(%a6)          # store the src optype tag
        rts

#################################################
# load a packed into %fp0:                      #
#       -number can't fault                     #
#       (1) calc ea                             #
#       (2) read 12 bytes into L_SCR(1,2,3)     #
#       (3) fmov.x into %fp0                    #
#################################################
load_packed:
        bsr.l           get_packed

        lea             FP_SRC(%a6),%a0         # pass ptr to src op
        bsr.l           set_tag_x               # determine src type tag
        cmpi.b          %d0,&UNNORM             # is the src op an UNNORM ZERO?
        beq.b           load_packed_unnorm      # yes

        mov.b           %d0,STAG(%a6)           # store the src optype tag
        rts

load_packed_unnorm:
        bsr.l           unnorm_fix              # fix the UNNORM ZERO
        mov.b           %d0,STAG(%a6)           # store the src optype tag
        rts

#########################################################################
# XDEF **************************************************************** #
#       fout(): move from fp register to memory or data register        #
#                                                                       #
# XREF **************************************************************** #
#       _round() - needed to create EXOP for sgl/dbl precision          #
#       norm() - needed to create EXOP for extended precision           #
#       ovf_res() - create default overflow result for sgl/dbl precision#
#       unf_res() - create default underflow result for sgl/dbl prec.   #
#       dst_dbl() - create rounded dbl precision result.                #
#       dst_sgl() - create rounded sgl precision result.                #
#       fetch_dreg() - fetch dynamic k-factor reg for packed.           #
#       bindec() - convert FP binary number to packed number.           #
#       _mem_write() - write data to memory.                            #
#       _mem_write2() - write data to memory unless supv mode -(a7) exc.#
#       _dmem_write_{byte,word,long}() - write data to memory.          #
#       store_dreg_{b,w,l}() - store data to data register file.        #
#       facc_out_{b,w,l,d,x}() - data access error occurred.            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision source operand               #
#       d0 = round prec,mode                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 : intermediate underflow or overflow result if              #
#             OVFL/UNFL occurred for a sgl or dbl operand               #
#                                                                       #
# ALGORITHM *********************************************************** #
#       This routine is accessed by many handlers that need to do an    #
# opclass three move of an operand out to memory.                       #
#       Decode an fmove out (opclass 3) instruction to determine if     #
# it's b,w,l,s,d,x, or p in size. b,w,l can be stored to either a data  #
# register or memory. The algorithm uses a standard "fmove" to create   #
# the rounded result. Also, since exceptions are disabled, this also    #
# create the correct OPERR default result if appropriate.               #
#       For sgl or dbl precision, overflow or underflow can occur. If   #
# either occurs and is enabled, the EXOP.                               #
#       For extended precision, the stacked <ea> must be fixed along    #
# w/ the address index register as appropriate w/ _calc_ea_fout(). If   #
# the source is a denorm and if underflow is enabled, an EXOP must be   #
# created.                                                              #
#       For packed, the k-factor must be fetched from the instruction   #
# word or a data register. The <ea> must be fixed as w/ extended        #
# precision. Then, bindec() is called to create the appropriate         #
# packed result.                                                        #
#       If at any time an access error is flagged by one of the move-   #
# to-memory routines, then a special exit must be made so that the      #
# access error can be handled properly.                                 #
#                                                                       #
#########################################################################

        global          fout
fout:
        bfextu          EXC_CMDREG(%a6){&3:&3},%d1 # extract dst fmt
        mov.w           (tbl_fout.b,%pc,%d1.w*2),%a1 # use as index
        jmp             (tbl_fout.b,%pc,%a1)    # jump to routine

        swbeg           &0x8
tbl_fout:
        short           fout_long       -       tbl_fout
        short           fout_sgl        -       tbl_fout
        short           fout_ext        -       tbl_fout
        short           fout_pack       -       tbl_fout
        short           fout_word       -       tbl_fout
        short           fout_dbl        -       tbl_fout
        short           fout_byte       -       tbl_fout
        short           fout_pack       -       tbl_fout

#################################################################
# fmove.b out ###################################################
#################################################################

# Only "Unimplemented Data Type" exceptions enter here. The operand
# is either a DENORM or a NORM.
fout_byte:
        tst.b           STAG(%a6)               # is operand normalized?
        bne.b           fout_byte_denorm        # no

        fmovm.x         SRC(%a0),&0x80          # load value

fout_byte_norm:
        fmov.l          %d0,%fpcr               # insert rnd prec,mode

        fmov.b          %fp0,%d0                # exec move out w/ correct rnd mode

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # fetch FPSR
        or.w            %d1,2+USER_FPSR(%a6)    # save new exc,accrued bits

        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_byte_dn            # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_byte        # write byte

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_b              # yes

        rts

fout_byte_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_b
        rts

fout_byte_denorm:
        mov.l           SRC_EX(%a0),%d1
        andi.l          &0x80000000,%d1         # keep DENORM sign
        ori.l           &0x00800000,%d1         # make smallest sgl
        fmov.s          %d1,%fp0
        bra.b           fout_byte_norm

#################################################################
# fmove.w out ###################################################
#################################################################

# Only "Unimplemented Data Type" exceptions enter here. The operand
# is either a DENORM or a NORM.
fout_word:
        tst.b           STAG(%a6)               # is operand normalized?
        bne.b           fout_word_denorm        # no

        fmovm.x         SRC(%a0),&0x80          # load value

fout_word_norm:
        fmov.l          %d0,%fpcr               # insert rnd prec:mode

        fmov.w          %fp0,%d0                # exec move out w/ correct rnd mode

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # fetch FPSR
        or.w            %d1,2+USER_FPSR(%a6)    # save new exc,accrued bits

        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_word_dn            # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_word        # write word

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_w              # yes

        rts

fout_word_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_w
        rts

fout_word_denorm:
        mov.l           SRC_EX(%a0),%d1
        andi.l          &0x80000000,%d1         # keep DENORM sign
        ori.l           &0x00800000,%d1         # make smallest sgl
        fmov.s          %d1,%fp0
        bra.b           fout_word_norm

#################################################################
# fmove.l out ###################################################
#################################################################

# Only "Unimplemented Data Type" exceptions enter here. The operand
# is either a DENORM or a NORM.
fout_long:
        tst.b           STAG(%a6)               # is operand normalized?
        bne.b           fout_long_denorm        # no

        fmovm.x         SRC(%a0),&0x80          # load value

fout_long_norm:
        fmov.l          %d0,%fpcr               # insert rnd prec:mode

        fmov.l          %fp0,%d0                # exec move out w/ correct rnd mode

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # fetch FPSR
        or.w            %d1,2+USER_FPSR(%a6)    # save new exc,accrued bits

fout_long_write:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_long_dn            # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_long        # write long

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        rts

fout_long_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_l
        rts

fout_long_denorm:
        mov.l           SRC_EX(%a0),%d1
        andi.l          &0x80000000,%d1         # keep DENORM sign
        ori.l           &0x00800000,%d1         # make smallest sgl
        fmov.s          %d1,%fp0
        bra.b           fout_long_norm

#################################################################
# fmove.x out ###################################################
#################################################################

# Only "Unimplemented Data Type" exceptions enter here. The operand
# is either a DENORM or a NORM.
# The DENORM causes an Underflow exception.
fout_ext:

# we copy the extended precision result to FP_SCR0 so that the reserved
# 16-bit field gets zeroed. we do this since we promise not to disturb
# what's at SRC(a0).
        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        clr.w           2+FP_SCR0_EX(%a6)       # clear reserved field
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        fmovm.x         SRC(%a0),&0x80          # return result

        bsr.l           _calc_ea_fout           # fix stacked <ea>

        mov.l           %a0,%a1                 # pass: dst addr
        lea             FP_SCR0(%a6),%a0        # pass: src addr
        mov.l           &0xc,%d0                # pass: opsize is 12 bytes

# we must not yet write the extended precision data to the stack
# in the pre-decrement case from supervisor mode or else we'll corrupt
# the stack frame. so, leave it in FP_SRC for now and deal with it later...
        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        beq.b           fout_ext_a7

        bsr.l           _dmem_write             # write ext prec number to memory

        tst.l           %d1                     # did dstore fail?
        bne.w           fout_ext_err            # yes

        tst.b           STAG(%a6)               # is operand normalized?
        bne.b           fout_ext_denorm         # no
        rts

# the number is a DENORM. must set the underflow exception bit
fout_ext_denorm:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set underflow exc bit

        mov.b           FPCR_ENABLE(%a6),%d0
        andi.b          &0x0a,%d0               # is UNFL or INEX enabled?
        bne.b           fout_ext_exc            # yes
        rts

# we don't want to do the write if the exception occurred in supervisor mode
# so _mem_write2() handles this for us.
fout_ext_a7:
        bsr.l           _mem_write2             # write ext prec number to memory

        tst.l           %d1                     # did dstore fail?
        bne.w           fout_ext_err            # yes

        tst.b           STAG(%a6)               # is operand normalized?
        bne.b           fout_ext_denorm         # no
        rts

fout_ext_exc:
        lea             FP_SCR0(%a6),%a0
        bsr.l           norm                    # normalize the mantissa
        neg.w           %d0                     # new exp = -(shft amt)
        andi.w          &0x7fff,%d0
        andi.w          &0x8000,FP_SCR0_EX(%a6) # keep only old sign
        or.w            %d0,FP_SCR0_EX(%a6)     # insert new exponent
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

fout_ext_err:
        mov.l           EXC_A6(%a6),(%a6)       # fix stacked a6
        bra.l           facc_out_x

#########################################################################
# fmove.s out ###########################################################
#########################################################################
fout_sgl:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &s_mode*0x10,%d0        # insert sgl prec
        mov.l           %d0,L_SCR3(%a6)         # save rnd prec,mode on stack

#
# operand is a normalized number. first, we check to see if the move out
# would cause either an underflow or overflow. these cases are handled
# separately. otherwise, set the FPCR to the proper rounding mode and
# execute the move.
#
        mov.w           SRC_EX(%a0),%d0         # extract exponent
        andi.w          &0x7fff,%d0             # strip sign

        cmpi.w          %d0,&SGL_HI             # will operand overflow?
        bgt.w           fout_sgl_ovfl           # yes; go handle OVFL
        beq.w           fout_sgl_may_ovfl       # maybe; go handle possible OVFL
        cmpi.w          %d0,&SGL_LO             # will operand underflow?
        blt.w           fout_sgl_unfl           # yes; go handle underflow

#
# NORMs(in range) can be stored out by a simple "fmov.s"
# Unnormalized inputs can come through this point.
#
fout_sgl_exg:
        fmovm.x         SRC(%a0),&0x80          # fetch fop from stack

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmov.s          %fp0,%d0                # store does convert and round

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d1               # save FPSR

        or.w            %d1,2+USER_FPSR(%a6)    # set possible inex2/ainex

fout_sgl_exg_write:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_sgl_exg_write_dn   # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_long        # write long

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        rts

fout_sgl_exg_write_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_l
        rts

#
# here, we know that the operand would UNFL if moved out to single prec,
# so, denorm and round and then use generic store single routine to
# write the value to memory.
#
fout_sgl_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set UNFL

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.l           %a0,-(%sp)

        clr.l           %d0                     # pass: S.F. = 0

        cmpi.b          STAG(%a6),&DENORM       # fetch src optype tag
        bne.b           fout_sgl_unfl_cont      # let DENORMs fall through

        lea             FP_SCR0(%a6),%a0
        bsr.l           norm                    # normalize the DENORM

fout_sgl_unfl_cont:
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calc default underflow result

        lea             FP_SCR0(%a6),%a0        # pass: ptr to fop
        bsr.l           dst_sgl                 # convert to single prec

        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_sgl_unfl_dn        # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_long        # write long

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        bra.b           fout_sgl_unfl_chkexc

fout_sgl_unfl_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_l

fout_sgl_unfl_chkexc:
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0a,%d1               # is UNFL or INEX enabled?
        bne.w           fout_sd_exc_unfl        # yes
        addq.l          &0x4,%sp
        rts

#
# it's definitely an overflow so call ovf_res to get the correct answer
#
fout_sgl_ovfl:
        tst.b           3+SRC_HI(%a0)           # is result inexact?
        bne.b           fout_sgl_ovfl_inex2
        tst.l           SRC_LO(%a0)             # is result inexact?
        bne.b           fout_sgl_ovfl_inex2
        ori.w           &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
        bra.b           fout_sgl_ovfl_cont
fout_sgl_ovfl_inex2:
        ori.w           &ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2

fout_sgl_ovfl_cont:
        mov.l           %a0,-(%sp)

# call ovf_res() w/ sgl prec and the correct rnd mode to create the default
# overflow result. DON'T save the returned ccodes from ovf_res() since
# fmove out doesn't alter them.
        tst.b           SRC_EX(%a0)             # is operand negative?
        smi             %d1                     # set if so
        mov.l           L_SCR3(%a6),%d0         # pass: sgl prec,rnd mode
        bsr.l           ovf_res                 # calc OVFL result
        fmovm.x         (%a0),&0x80             # load default overflow result
        fmov.s          %fp0,%d0                # store to single

        mov.b           1+EXC_OPWORD(%a6),%d1   # extract dst mode
        andi.b          &0x38,%d1               # is mode == 0? (Dreg dst)
        beq.b           fout_sgl_ovfl_dn        # must save to integer regfile

        mov.l           EXC_EA(%a6),%a0         # stacked <ea> is correct
        bsr.l           _dmem_write_long        # write long

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_l              # yes

        bra.b           fout_sgl_ovfl_chkexc

fout_sgl_ovfl_dn:
        mov.b           1+EXC_OPWORD(%a6),%d1   # extract Dn
        andi.w          &0x7,%d1
        bsr.l           store_dreg_l

fout_sgl_ovfl_chkexc:
        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0a,%d1               # is UNFL or INEX enabled?
        bne.w           fout_sd_exc_ovfl        # yes
        addq.l          &0x4,%sp
        rts

#
# move out MAY overflow:
# (1) force the exp to 0x3fff
# (2) do a move w/ appropriate rnd mode
# (3) if exp still equals zero, then insert original exponent
#       for the correct result.
#     if exp now equals one, then it overflowed so call ovf_res.
#
fout_sgl_may_ovfl:
        mov.w           SRC_EX(%a0),%d1         # fetch current sign
        andi.w          &0x8000,%d1             # keep it,clear exp
        ori.w           &0x3fff,%d1             # insert exp = 0
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert scaled exp
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fmov.x          FP_SCR0(%a6),%fp0       # force fop to be rounded
        fmov.l          &0x0,%fpcr              # clear FPCR

        fabs.x          %fp0                    # need absolute value
        fcmp.b          %fp0,&0x2               # did exponent increase?
        fblt.w          fout_sgl_exg            # no; go finish NORM
        bra.w           fout_sgl_ovfl           # yes; go handle overflow

################

fout_sd_exc_unfl:
        mov.l           (%sp)+,%a0

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

        cmpi.b          STAG(%a6),&DENORM       # was src a DENORM?
        bne.b           fout_sd_exc_cont        # no

        lea             FP_SCR0(%a6),%a0
        bsr.l           norm
        neg.l           %d0
        andi.w          &0x7fff,%d0
        bfins           %d0,FP_SCR0_EX(%a6){&1:&15}
        bra.b           fout_sd_exc_cont

fout_sd_exc:
fout_sd_exc_ovfl:
        mov.l           (%sp)+,%a0              # restore a0

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)

fout_sd_exc_cont:
        bclr            &0x7,FP_SCR0_EX(%a6)    # clear sign bit
        sne.b           2+FP_SCR0_EX(%a6)       # set internal sign bit
        lea             FP_SCR0(%a6),%a0        # pass: ptr to DENORM

        mov.b           3+L_SCR3(%a6),%d1
        lsr.b           &0x4,%d1
        andi.w          &0x0c,%d1
        swap            %d1
        mov.b           3+L_SCR3(%a6),%d1
        lsr.b           &0x4,%d1
        andi.w          &0x03,%d1
        clr.l           %d0                     # pass: zero g,r,s
        bsr.l           _round                  # round the DENORM

        tst.b           2+FP_SCR0_EX(%a6)       # is EXOP negative?
        beq.b           fout_sd_exc_done        # no
        bset            &0x7,FP_SCR0_EX(%a6)    # yes

fout_sd_exc_done:
        fmovm.x         FP_SCR0(%a6),&0x40      # return EXOP in fp1
        rts

#################################################################
# fmove.d out ###################################################
#################################################################
fout_dbl:
        andi.b          &0x30,%d0               # clear rnd prec
        ori.b           &d_mode*0x10,%d0        # insert dbl prec
        mov.l           %d0,L_SCR3(%a6)         # save rnd prec,mode on stack

#
# operand is a normalized number. first, we check to see if the move out
# would cause either an underflow or overflow. these cases are handled
# separately. otherwise, set the FPCR to the proper rounding mode and
# execute the move.
#
        mov.w           SRC_EX(%a0),%d0         # extract exponent
        andi.w          &0x7fff,%d0             # strip sign

        cmpi.w          %d0,&DBL_HI             # will operand overflow?
        bgt.w           fout_dbl_ovfl           # yes; go handle OVFL
        beq.w           fout_dbl_may_ovfl       # maybe; go handle possible OVFL
        cmpi.w          %d0,&DBL_LO             # will operand underflow?
        blt.w           fout_dbl_unfl           # yes; go handle underflow

#
# NORMs(in range) can be stored out by a simple "fmov.d"
# Unnormalized inputs can come through this point.
#
fout_dbl_exg:
        fmovm.x         SRC(%a0),&0x80          # fetch fop from stack

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR
        fmov.l          &0x0,%fpsr              # clear FPSR

        fmov.d          %fp0,L_SCR1(%a6)        # store does convert and round

        fmov.l          &0x0,%fpcr              # clear FPCR
        fmov.l          %fpsr,%d0               # save FPSR

        or.w            %d0,2+USER_FPSR(%a6)    # set possible inex2/ainex

        mov.l           EXC_EA(%a6),%a1         # pass: dst addr
        lea             L_SCR1(%a6),%a0         # pass: src addr
        movq.l          &0x8,%d0                # pass: opsize is 8 bytes
        bsr.l           _dmem_write             # store dbl fop to memory

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_d              # yes

        rts                                     # no; so we're finished

#
# here, we know that the operand would UNFL if moved out to double prec,
# so, denorm and round and then use generic store double routine to
# write the value to memory.
#
fout_dbl_unfl:
        bset            &unfl_bit,FPSR_EXCEPT(%a6) # set UNFL

        mov.w           SRC_EX(%a0),FP_SCR0_EX(%a6)
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6)
        mov.l           %a0,-(%sp)

        clr.l           %d0                     # pass: S.F. = 0

        cmpi.b          STAG(%a6),&DENORM       # fetch src optype tag
        bne.b           fout_dbl_unfl_cont      # let DENORMs fall through

        lea             FP_SCR0(%a6),%a0
        bsr.l           norm                    # normalize the DENORM

fout_dbl_unfl_cont:
        lea             FP_SCR0(%a6),%a0        # pass: ptr to operand
        mov.l           L_SCR3(%a6),%d1         # pass: rnd prec,mode
        bsr.l           unf_res                 # calc default underflow result

        lea             FP_SCR0(%a6),%a0        # pass: ptr to fop
        bsr.l           dst_dbl                 # convert to single prec
        mov.l           %d0,L_SCR1(%a6)
        mov.l           %d1,L_SCR2(%a6)

        mov.l           EXC_EA(%a6),%a1         # pass: dst addr
        lea             L_SCR1(%a6),%a0         # pass: src addr
        movq.l          &0x8,%d0                # pass: opsize is 8 bytes
        bsr.l           _dmem_write             # store dbl fop to memory

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_d              # yes

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0a,%d1               # is UNFL or INEX enabled?
        bne.w           fout_sd_exc_unfl        # yes
        addq.l          &0x4,%sp
        rts

#
# it's definitely an overflow so call ovf_res to get the correct answer
#
fout_dbl_ovfl:
        mov.w           2+SRC_LO(%a0),%d0
        andi.w          &0x7ff,%d0
        bne.b           fout_dbl_ovfl_inex2

        ori.w           &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex
        bra.b           fout_dbl_ovfl_cont
fout_dbl_ovfl_inex2:
        ori.w           &ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2

fout_dbl_ovfl_cont:
        mov.l           %a0,-(%sp)

# call ovf_res() w/ dbl prec and the correct rnd mode to create the default
# overflow result. DON'T save the returned ccodes from ovf_res() since
# fmove out doesn't alter them.
        tst.b           SRC_EX(%a0)             # is operand negative?
        smi             %d1                     # set if so
        mov.l           L_SCR3(%a6),%d0         # pass: dbl prec,rnd mode
        bsr.l           ovf_res                 # calc OVFL result
        fmovm.x         (%a0),&0x80             # load default overflow result
        fmov.d          %fp0,L_SCR1(%a6)        # store to double

        mov.l           EXC_EA(%a6),%a1         # pass: dst addr
        lea             L_SCR1(%a6),%a0         # pass: src addr
        movq.l          &0x8,%d0                # pass: opsize is 8 bytes
        bsr.l           _dmem_write             # store dbl fop to memory

        tst.l           %d1                     # did dstore fail?
        bne.l           facc_out_d              # yes

        mov.b           FPCR_ENABLE(%a6),%d1
        andi.b          &0x0a,%d1               # is UNFL or INEX enabled?
        bne.w           fout_sd_exc_ovfl        # yes
        addq.l          &0x4,%sp
        rts

#
# move out MAY overflow:
# (1) force the exp to 0x3fff
# (2) do a move w/ appropriate rnd mode
# (3) if exp still equals zero, then insert original exponent
#       for the correct result.
#     if exp now equals one, then it overflowed so call ovf_res.
#
fout_dbl_may_ovfl:
        mov.w           SRC_EX(%a0),%d1         # fetch current sign
        andi.w          &0x8000,%d1             # keep it,clear exp
        ori.w           &0x3fff,%d1             # insert exp = 0
        mov.w           %d1,FP_SCR0_EX(%a6)     # insert scaled exp
        mov.l           SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man)
        mov.l           SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man)

        fmov.l          L_SCR3(%a6),%fpcr       # set FPCR

        fmov.x          FP_SCR0(%a6),%fp0       # force fop to be rounded
        fmov.l          &0x0,%fpcr              # clear FPCR

        fabs.x          %fp0                    # need absolute value
        fcmp.b          %fp0,&0x2               # did exponent increase?
        fblt.w          fout_dbl_exg            # no; go finish NORM
        bra.w           fout_dbl_ovfl           # yes; go handle overflow

#########################################################################
# XDEF **************************************************************** #
#       dst_dbl(): create double precision value from extended prec.    #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to source operand in extended precision            #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = hi(double precision result)                                #
#       d1 = lo(double precision result)                                #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#  Changes extended precision to double precision.                      #
#  Note: no attempt is made to round the extended value to double.      #
#       dbl_sign = ext_sign                                             #
#       dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)            #
#       get rid of ext integer bit                                      #
#       dbl_mant = ext_mant{62:12}                                      #
#                                                                       #
#               ---------------   ---------------    ---------------    #
#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |    #
#               ---------------   ---------------    ---------------    #
#                95         64    63 62       32      31     11   0     #
#                                    |                       |          #
#                                    |                       |          #
#                                    |                       |          #
#                                    v                       v          #
#                             ---------------   ---------------         #
#  double   ->                |s|exp| mant  |   |  mant       |         #
#                             ---------------   ---------------         #
#                             63     51   32   31              0        #
#                                                                       #
#########################################################################

dst_dbl:
        clr.l           %d0                     # clear d0
        mov.w           FTEMP_EX(%a0),%d0       # get exponent
        subi.w          &EXT_BIAS,%d0           # subtract extended precision bias
        addi.w          &DBL_BIAS,%d0           # add double precision bias
        tst.b           FTEMP_HI(%a0)           # is number a denorm?
        bmi.b           dst_get_dupper          # no
        subq.w          &0x1,%d0                # yes; denorm bias = DBL_BIAS - 1
dst_get_dupper:
        swap            %d0                     # d0 now in upper word
        lsl.l           &0x4,%d0                # d0 in proper place for dbl prec exp
        tst.b           FTEMP_EX(%a0)           # test sign
        bpl.b           dst_get_dman            # if postive, go process mantissa
        bset            &0x1f,%d0               # if negative, set sign
dst_get_dman:
        mov.l           FTEMP_HI(%a0),%d1       # get ms mantissa
        bfextu          %d1{&1:&20},%d1         # get upper 20 bits of ms
        or.l            %d1,%d0                 # put these bits in ms word of double
        mov.l           %d0,L_SCR1(%a6)         # put the new exp back on the stack
        mov.l           FTEMP_HI(%a0),%d1       # get ms mantissa
        mov.l           &21,%d0                 # load shift count
        lsl.l           %d0,%d1                 # put lower 11 bits in upper bits
        mov.l           %d1,L_SCR2(%a6)         # build lower lword in memory
        mov.l           FTEMP_LO(%a0),%d1       # get ls mantissa
        bfextu          %d1{&0:&21},%d0         # get ls 21 bits of double
        mov.l           L_SCR2(%a6),%d1
        or.l            %d0,%d1                 # put them in double result
        mov.l           L_SCR1(%a6),%d0
        rts

#########################################################################
# XDEF **************************************************************** #
#       dst_sgl(): create single precision value from extended prec     #
#                                                                       #
# XREF **************************************************************** #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to source operand in extended precision            #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = single precision result                                    #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
# Changes extended precision to single precision.                       #
#       sgl_sign = ext_sign                                             #
#       sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)             #
#       get rid of ext integer bit                                      #
#       sgl_mant = ext_mant{62:12}                                      #
#                                                                       #
#               ---------------   ---------------    ---------------    #
#  extended ->  |s|    exp    |   |1| ms mant   |    | ls mant     |    #
#               ---------------   ---------------    ---------------    #
#                95         64    63 62    40 32      31     12   0     #
#                                    |     |                            #
#                                    |     |                            #
#                                    |     |                            #
#                                    v     v                            #
#                             ---------------                           #
#  single   ->                |s|exp| mant  |                           #
#                             ---------------                           #
#                             31     22     0                           #
#                                                                       #
#########################################################################

dst_sgl:
        clr.l           %d0
        mov.w           FTEMP_EX(%a0),%d0       # get exponent
        subi.w          &EXT_BIAS,%d0           # subtract extended precision bias
        addi.w          &SGL_BIAS,%d0           # add single precision bias
        tst.b           FTEMP_HI(%a0)           # is number a denorm?
        bmi.b           dst_get_supper          # no
        subq.w          &0x1,%d0                # yes; denorm bias = SGL_BIAS - 1
dst_get_supper:
        swap            %d0                     # put exp in upper word of d0
        lsl.l           &0x7,%d0                # shift it into single exp bits
        tst.b           FTEMP_EX(%a0)           # test sign
        bpl.b           dst_get_sman            # if positive, continue
        bset            &0x1f,%d0               # if negative, put in sign first
dst_get_sman:
        mov.l           FTEMP_HI(%a0),%d1       # get ms mantissa
        andi.l          &0x7fffff00,%d1         # get upper 23 bits of ms
        lsr.l           &0x8,%d1                # and put them flush right
        or.l            %d1,%d0                 # put these bits in ms word of single
        rts

##############################################################################
fout_pack:
        bsr.l           _calc_ea_fout           # fetch the <ea>
        mov.l           %a0,-(%sp)

        mov.b           STAG(%a6),%d0           # fetch input type
        bne.w           fout_pack_not_norm      # input is not NORM

fout_pack_norm:
        btst            &0x4,EXC_CMDREG(%a6)    # static or dynamic?
        beq.b           fout_pack_s             # static

fout_pack_d:
        mov.b           1+EXC_CMDREG(%a6),%d1   # fetch dynamic reg
        lsr.b           &0x4,%d1
        andi.w          &0x7,%d1

        bsr.l           fetch_dreg              # fetch Dn w/ k-factor

        bra.b           fout_pack_type
fout_pack_s:
        mov.b           1+EXC_CMDREG(%a6),%d0   # fetch static field

fout_pack_type:
        bfexts          %d0{&25:&7},%d0         # extract k-factor
        mov.l   %d0,-(%sp)

        lea             FP_SRC(%a6),%a0         # pass: ptr to input

# bindec is currently scrambling FP_SRC for denorm inputs.
# we'll have to change this, but for now, tough luck!!!
        bsr.l           bindec                  # convert xprec to packed

#       andi.l          &0xcfff000f,FP_SCR0(%a6) # clear unused fields
        andi.l          &0xcffff00f,FP_SCR0(%a6) # clear unused fields

        mov.l   (%sp)+,%d0

        tst.b           3+FP_SCR0_EX(%a6)
        bne.b           fout_pack_set
        tst.l           FP_SCR0_HI(%a6)
        bne.b           fout_pack_set
        tst.l           FP_SCR0_LO(%a6)
        bne.b           fout_pack_set

# add the extra condition that only if the k-factor was zero, too, should
# we zero the exponent
        tst.l           %d0
        bne.b           fout_pack_set
# "mantissa" is all zero which means that the answer is zero. but, the '040
# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
# if the mantissa is zero, I will zero the exponent, too.
# the question now is whether the exponents sign bit is allowed to be non-zero
# for a zero, also...
        andi.w          &0xf000,FP_SCR0(%a6)

fout_pack_set:

        lea             FP_SCR0(%a6),%a0        # pass: src addr

fout_pack_write:
        mov.l           (%sp)+,%a1              # pass: dst addr
        mov.l           &0xc,%d0                # pass: opsize is 12 bytes

        cmpi.b          SPCOND_FLG(%a6),&mda7_flg
        beq.b           fout_pack_a7

        bsr.l           _dmem_write             # write ext prec number to memory

        tst.l           %d1                     # did dstore fail?
        bne.w           fout_ext_err            # yes

        rts

# we don't want to do the write if the exception occurred in supervisor mode
# so _mem_write2() handles this for us.
fout_pack_a7:
        bsr.l           _mem_write2             # write ext prec number to memory

        tst.l           %d1                     # did dstore fail?
        bne.w           fout_ext_err            # yes

        rts

fout_pack_not_norm:
        cmpi.b          %d0,&DENORM             # is it a DENORM?
        beq.w           fout_pack_norm          # yes
        lea             FP_SRC(%a6),%a0
        clr.w           2+FP_SRC_EX(%a6)
        cmpi.b          %d0,&SNAN               # is it an SNAN?
        beq.b           fout_pack_snan          # yes
        bra.b           fout_pack_write         # no

fout_pack_snan:
        ori.w           &snaniop2_mask,FPSR_EXCEPT(%a6) # set SNAN/AIOP
        bset            &0x6,FP_SRC_HI(%a6)     # set snan bit
        bra.b           fout_pack_write

#########################################################################
# XDEF **************************************************************** #
#       fetch_dreg(): fetch register according to index in d1           #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d1 = index of register to fetch from                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = value of register fetched                                  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       According to the index value in d1 which can range from zero    #
# to fifteen, load the corresponding register file value (where         #
# address register indexes start at 8). D0/D1/A0/A1/A6/A7 are on the    #
# stack. The rest should still be in their original places.             #
#                                                                       #
#########################################################################

# this routine leaves d1 intact for subsequent store_dreg calls.
        global          fetch_dreg
fetch_dreg:
        mov.w           (tbl_fdreg.b,%pc,%d1.w*2),%d0
        jmp             (tbl_fdreg.b,%pc,%d0.w*1)

tbl_fdreg:
        short           fdreg0 - tbl_fdreg
        short           fdreg1 - tbl_fdreg
        short           fdreg2 - tbl_fdreg
        short           fdreg3 - tbl_fdreg
        short           fdreg4 - tbl_fdreg
        short           fdreg5 - tbl_fdreg
        short           fdreg6 - tbl_fdreg
        short           fdreg7 - tbl_fdreg
        short           fdreg8 - tbl_fdreg
        short           fdreg9 - tbl_fdreg
        short           fdrega - tbl_fdreg
        short           fdregb - tbl_fdreg
        short           fdregc - tbl_fdreg
        short           fdregd - tbl_fdreg
        short           fdrege - tbl_fdreg
        short           fdregf - tbl_fdreg

fdreg0:
        mov.l           EXC_DREGS+0x0(%a6),%d0
        rts
fdreg1:
        mov.l           EXC_DREGS+0x4(%a6),%d0
        rts
fdreg2:
        mov.l           %d2,%d0
        rts
fdreg3:
        mov.l           %d3,%d0
        rts
fdreg4:
        mov.l           %d4,%d0
        rts
fdreg5:
        mov.l           %d5,%d0
        rts
fdreg6:
        mov.l           %d6,%d0
        rts
fdreg7:
        mov.l           %d7,%d0
        rts
fdreg8:
        mov.l           EXC_DREGS+0x8(%a6),%d0
        rts
fdreg9:
        mov.l           EXC_DREGS+0xc(%a6),%d0
        rts
fdrega:
        mov.l           %a2,%d0
        rts
fdregb:
        mov.l           %a3,%d0
        rts
fdregc:
        mov.l           %a4,%d0
        rts
fdregd:
        mov.l           %a5,%d0
        rts
fdrege:
        mov.l           (%a6),%d0
        rts
fdregf:
        mov.l           EXC_A7(%a6),%d0
        rts

#########################################################################
# XDEF **************************************************************** #
#       store_dreg_l(): store longword to data register specified by d1 #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = longowrd value to store                                    #
#       d1 = index of register to fetch from                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       (data register is updated)                                      #
#                                                                       #
# ALGORITHM *********************************************************** #
#       According to the index value in d1, store the longword value    #
# in d0 to the corresponding data register. D0/D1 are on the stack      #
# while the rest are in their initial places.                           #
#                                                                       #
#########################################################################

        global          store_dreg_l
store_dreg_l:
        mov.w           (tbl_sdregl.b,%pc,%d1.w*2),%d1
        jmp             (tbl_sdregl.b,%pc,%d1.w*1)

tbl_sdregl:
        short           sdregl0 - tbl_sdregl
        short           sdregl1 - tbl_sdregl
        short           sdregl2 - tbl_sdregl
        short           sdregl3 - tbl_sdregl
        short           sdregl4 - tbl_sdregl
        short           sdregl5 - tbl_sdregl
        short           sdregl6 - tbl_sdregl
        short           sdregl7 - tbl_sdregl

sdregl0:
        mov.l           %d0,EXC_DREGS+0x0(%a6)
        rts
sdregl1:
        mov.l           %d0,EXC_DREGS+0x4(%a6)
        rts
sdregl2:
        mov.l           %d0,%d2
        rts
sdregl3:
        mov.l           %d0,%d3
        rts
sdregl4:
        mov.l           %d0,%d4
        rts
sdregl5:
        mov.l           %d0,%d5
        rts
sdregl6:
        mov.l           %d0,%d6
        rts
sdregl7:
        mov.l           %d0,%d7
        rts

#########################################################################
# XDEF **************************************************************** #
#       store_dreg_w(): store word to data register specified by d1     #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = word value to store                                        #
#       d1 = index of register to fetch from                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       (data register is updated)                                      #
#                                                                       #
# ALGORITHM *********************************************************** #
#       According to the index value in d1, store the word value        #
# in d0 to the corresponding data register. D0/D1 are on the stack      #
# while the rest are in their initial places.                           #
#                                                                       #
#########################################################################

        global          store_dreg_w
store_dreg_w:
        mov.w           (tbl_sdregw.b,%pc,%d1.w*2),%d1
        jmp             (tbl_sdregw.b,%pc,%d1.w*1)

tbl_sdregw:
        short           sdregw0 - tbl_sdregw
        short           sdregw1 - tbl_sdregw
        short           sdregw2 - tbl_sdregw
        short           sdregw3 - tbl_sdregw
        short           sdregw4 - tbl_sdregw
        short           sdregw5 - tbl_sdregw
        short           sdregw6 - tbl_sdregw
        short           sdregw7 - tbl_sdregw

sdregw0:
        mov.w           %d0,2+EXC_DREGS+0x0(%a6)
        rts
sdregw1:
        mov.w           %d0,2+EXC_DREGS+0x4(%a6)
        rts
sdregw2:
        mov.w           %d0,%d2
        rts
sdregw3:
        mov.w           %d0,%d3
        rts
sdregw4:
        mov.w           %d0,%d4
        rts
sdregw5:
        mov.w           %d0,%d5
        rts
sdregw6:
        mov.w           %d0,%d6
        rts
sdregw7:
        mov.w           %d0,%d7
        rts

#########################################################################
# XDEF **************************************************************** #
#       store_dreg_b(): store byte to data register specified by d1     #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = byte value to store                                        #
#       d1 = index of register to fetch from                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       (data register is updated)                                      #
#                                                                       #
# ALGORITHM *********************************************************** #
#       According to the index value in d1, store the byte value        #
# in d0 to the corresponding data register. D0/D1 are on the stack      #
# while the rest are in their initial places.                           #
#                                                                       #
#########################################################################

        global          store_dreg_b
store_dreg_b:
        mov.w           (tbl_sdregb.b,%pc,%d1.w*2),%d1
        jmp             (tbl_sdregb.b,%pc,%d1.w*1)

tbl_sdregb:
        short           sdregb0 - tbl_sdregb
        short           sdregb1 - tbl_sdregb
        short           sdregb2 - tbl_sdregb
        short           sdregb3 - tbl_sdregb
        short           sdregb4 - tbl_sdregb
        short           sdregb5 - tbl_sdregb
        short           sdregb6 - tbl_sdregb
        short           sdregb7 - tbl_sdregb

sdregb0:
        mov.b           %d0,3+EXC_DREGS+0x0(%a6)
        rts
sdregb1:
        mov.b           %d0,3+EXC_DREGS+0x4(%a6)
        rts
sdregb2:
        mov.b           %d0,%d2
        rts
sdregb3:
        mov.b           %d0,%d3
        rts
sdregb4:
        mov.b           %d0,%d4
        rts
sdregb5:
        mov.b           %d0,%d5
        rts
sdregb6:
        mov.b           %d0,%d6
        rts
sdregb7:
        mov.b           %d0,%d7
        rts

#########################################################################
# XDEF **************************************************************** #
#       inc_areg(): increment an address register by the value in d0    #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = amount to increment by                                     #
#       d1 = index of address register to increment                     #
#                                                                       #
# OUTPUT ************************************************************** #
#       (address register is updated)                                   #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Typically used for an instruction w/ a post-increment <ea>,     #
# this routine adds the increment value in d0 to the address register   #
# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside     #
# in their original places.                                             #
#       For a7, if the increment amount is one, then we have to         #
# increment by two. For any a7 update, set the mia7_flag so that if     #
# an access error exception occurs later in emulation, this address     #
# register update can be undone.                                        #
#                                                                       #
#########################################################################

        global          inc_areg
inc_areg:
        mov.w           (tbl_iareg.b,%pc,%d1.w*2),%d1
        jmp             (tbl_iareg.b,%pc,%d1.w*1)

tbl_iareg:
        short           iareg0 - tbl_iareg
        short           iareg1 - tbl_iareg
        short           iareg2 - tbl_iareg
        short           iareg3 - tbl_iareg
        short           iareg4 - tbl_iareg
        short           iareg5 - tbl_iareg
        short           iareg6 - tbl_iareg
        short           iareg7 - tbl_iareg

iareg0: add.l           %d0,EXC_DREGS+0x8(%a6)
        rts
iareg1: add.l           %d0,EXC_DREGS+0xc(%a6)
        rts
iareg2: add.l           %d0,%a2
        rts
iareg3: add.l           %d0,%a3
        rts
iareg4: add.l           %d0,%a4
        rts
iareg5: add.l           %d0,%a5
        rts
iareg6: add.l           %d0,(%a6)
        rts
iareg7: mov.b           &mia7_flg,SPCOND_FLG(%a6)
        cmpi.b          %d0,&0x1
        beq.b           iareg7b
        add.l           %d0,EXC_A7(%a6)
        rts
iareg7b:
        addq.l          &0x2,EXC_A7(%a6)
        rts

#########################################################################
# XDEF **************************************************************** #
#       dec_areg(): decrement an address register by the value in d0    #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = amount to decrement by                                     #
#       d1 = index of address register to decrement                     #
#                                                                       #
# OUTPUT ************************************************************** #
#       (address register is updated)                                   #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Typically used for an instruction w/ a pre-decrement <ea>,      #
# this routine adds the decrement value in d0 to the address register   #
# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside     #
# in their original places.                                             #
#       For a7, if the decrement amount is one, then we have to         #
# decrement by two. For any a7 update, set the mda7_flag so that if     #
# an access error exception occurs later in emulation, this address     #
# register update can be undone.                                        #
#                                                                       #
#########################################################################

        global          dec_areg
dec_areg:
        mov.w           (tbl_dareg.b,%pc,%d1.w*2),%d1
        jmp             (tbl_dareg.b,%pc,%d1.w*1)

tbl_dareg:
        short           dareg0 - tbl_dareg
        short           dareg1 - tbl_dareg
        short           dareg2 - tbl_dareg
        short           dareg3 - tbl_dareg
        short           dareg4 - tbl_dareg
        short           dareg5 - tbl_dareg
        short           dareg6 - tbl_dareg
        short           dareg7 - tbl_dareg

dareg0: sub.l           %d0,EXC_DREGS+0x8(%a6)
        rts
dareg1: sub.l           %d0,EXC_DREGS+0xc(%a6)
        rts
dareg2: sub.l           %d0,%a2
        rts
dareg3: sub.l           %d0,%a3
        rts
dareg4: sub.l           %d0,%a4
        rts
dareg5: sub.l           %d0,%a5
        rts
dareg6: sub.l           %d0,(%a6)
        rts
dareg7: mov.b           &mda7_flg,SPCOND_FLG(%a6)
        cmpi.b          %d0,&0x1
        beq.b           dareg7b
        sub.l           %d0,EXC_A7(%a6)
        rts
dareg7b:
        subq.l          &0x2,EXC_A7(%a6)
        rts

##############################################################################

#########################################################################
# XDEF **************************************************************** #
#       load_fpn1(): load FP register value into FP_SRC(a6).            #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = index of FP register to load                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SRC(a6) = value loaded from FP register file                 #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Using the index in d0, load FP_SRC(a6) with a number from the   #
# FP register file.                                                     #
#                                                                       #
#########################################################################

        global          load_fpn1
load_fpn1:
        mov.w           (tbl_load_fpn1.b,%pc,%d0.w*2), %d0
        jmp             (tbl_load_fpn1.b,%pc,%d0.w*1)

tbl_load_fpn1:
        short           load_fpn1_0 - tbl_load_fpn1
        short           load_fpn1_1 - tbl_load_fpn1
        short           load_fpn1_2 - tbl_load_fpn1
        short           load_fpn1_3 - tbl_load_fpn1
        short           load_fpn1_4 - tbl_load_fpn1
        short           load_fpn1_5 - tbl_load_fpn1
        short           load_fpn1_6 - tbl_load_fpn1
        short           load_fpn1_7 - tbl_load_fpn1

load_fpn1_0:
        mov.l           0+EXC_FP0(%a6), 0+FP_SRC(%a6)
        mov.l           4+EXC_FP0(%a6), 4+FP_SRC(%a6)
        mov.l           8+EXC_FP0(%a6), 8+FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_1:
        mov.l           0+EXC_FP1(%a6), 0+FP_SRC(%a6)
        mov.l           4+EXC_FP1(%a6), 4+FP_SRC(%a6)
        mov.l           8+EXC_FP1(%a6), 8+FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_2:
        fmovm.x         &0x20, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_3:
        fmovm.x         &0x10, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_4:
        fmovm.x         &0x08, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_5:
        fmovm.x         &0x04, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_6:
        fmovm.x         &0x02, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts
load_fpn1_7:
        fmovm.x         &0x01, FP_SRC(%a6)
        lea             FP_SRC(%a6), %a0
        rts

#############################################################################

#########################################################################
# XDEF **************************************************************** #
#       load_fpn2(): load FP register value into FP_DST(a6).            #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d0 = index of FP register to load                               #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_DST(a6) = value loaded from FP register file                 #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Using the index in d0, load FP_DST(a6) with a number from the   #
# FP register file.                                                     #
#                                                                       #
#########################################################################

        global          load_fpn2
load_fpn2:
        mov.w           (tbl_load_fpn2.b,%pc,%d0.w*2), %d0
        jmp             (tbl_load_fpn2.b,%pc,%d0.w*1)

tbl_load_fpn2:
        short           load_fpn2_0 - tbl_load_fpn2
        short           load_fpn2_1 - tbl_load_fpn2
        short           load_fpn2_2 - tbl_load_fpn2
        short           load_fpn2_3 - tbl_load_fpn2
        short           load_fpn2_4 - tbl_load_fpn2
        short           load_fpn2_5 - tbl_load_fpn2
        short           load_fpn2_6 - tbl_load_fpn2
        short           load_fpn2_7 - tbl_load_fpn2

load_fpn2_0:
        mov.l           0+EXC_FP0(%a6), 0+FP_DST(%a6)
        mov.l           4+EXC_FP0(%a6), 4+FP_DST(%a6)
        mov.l           8+EXC_FP0(%a6), 8+FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_1:
        mov.l           0+EXC_FP1(%a6), 0+FP_DST(%a6)
        mov.l           4+EXC_FP1(%a6), 4+FP_DST(%a6)
        mov.l           8+EXC_FP1(%a6), 8+FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_2:
        fmovm.x         &0x20, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_3:
        fmovm.x         &0x10, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_4:
        fmovm.x         &0x08, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_5:
        fmovm.x         &0x04, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_6:
        fmovm.x         &0x02, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts
load_fpn2_7:
        fmovm.x         &0x01, FP_DST(%a6)
        lea             FP_DST(%a6), %a0
        rts

#############################################################################

#########################################################################
# XDEF **************************************************************** #
#       store_fpreg(): store an fp value to the fpreg designated d0.    #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       fp0 = extended precision value to store                         #
#       d0  = index of floating-point register                          #
#                                                                       #
# OUTPUT ************************************************************** #
#       None                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Store the value in fp0 to the FP register designated by the     #
# value in d0. The FP number can be DENORM or SNAN so we have to be     #
# careful that we don't take an exception here.                         #
#                                                                       #
#########################################################################

        global          store_fpreg
store_fpreg:
        mov.w           (tbl_store_fpreg.b,%pc,%d0.w*2), %d0
        jmp             (tbl_store_fpreg.b,%pc,%d0.w*1)

tbl_store_fpreg:
        short           store_fpreg_0 - tbl_store_fpreg
        short           store_fpreg_1 - tbl_store_fpreg
        short           store_fpreg_2 - tbl_store_fpreg
        short           store_fpreg_3 - tbl_store_fpreg
        short           store_fpreg_4 - tbl_store_fpreg
        short           store_fpreg_5 - tbl_store_fpreg
        short           store_fpreg_6 - tbl_store_fpreg
        short           store_fpreg_7 - tbl_store_fpreg

store_fpreg_0:
        fmovm.x         &0x80, EXC_FP0(%a6)
        rts
store_fpreg_1:
        fmovm.x         &0x80, EXC_FP1(%a6)
        rts
store_fpreg_2:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x20
        rts
store_fpreg_3:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x10
        rts
store_fpreg_4:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x08
        rts
store_fpreg_5:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x04
        rts
store_fpreg_6:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x02
        rts
store_fpreg_7:
        fmovm.x         &0x01, -(%sp)
        fmovm.x         (%sp)+, &0x01
        rts

#########################################################################
# XDEF **************************************************************** #
#       _denorm(): denormalize an intermediate result                   #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = points to the operand to be denormalized                   #
#               (in the internal extended format)                       #
#                                                                       #
#       d0 = rounding precision                                         #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0 = pointer to the denormalized result                         #
#               (in the internal extended format)                       #
#                                                                       #
#       d0 = guard,round,sticky                                         #
#                                                                       #
# ALGORITHM *********************************************************** #
#       According to the exponent underflow threshold for the given     #
# precision, shift the mantissa bits to the right in order raise the    #
# exponent of the operand to the threshold value. While shifting the    #
# mantissa bits right, maintain the value of the guard, round, and      #
# sticky bits.                                                          #
# other notes:                                                          #
#       (1) _denorm() is called by the underflow routines               #
#       (2) _denorm() does NOT affect the status register               #
#                                                                       #
#########################################################################

#
# table of exponent threshold values for each precision
#
tbl_thresh:
        short           0x0
        short           sgl_thresh
        short           dbl_thresh

        global          _denorm
_denorm:
#
# Load the exponent threshold for the precision selected and check
# to see if (threshold - exponent) is > 65 in which case we can
# simply calculate the sticky bit and zero the mantissa. otherwise
# we have to call the denormalization routine.
#
        lsr.b           &0x2, %d0               # shift prec to lo bits
        mov.w           (tbl_thresh.b,%pc,%d0.w*2), %d1 # load prec threshold
        mov.w           %d1, %d0                # copy d1 into d0
        sub.w           FTEMP_EX(%a0), %d0      # diff = threshold - exp
        cmpi.w          %d0, &66                # is diff > 65? (mant + g,r bits)
        bpl.b           denorm_set_stky         # yes; just calc sticky

        clr.l           %d0                     # clear g,r,s
        btst            &inex2_bit, FPSR_EXCEPT(%a6) # yes; was INEX2 set?
        beq.b           denorm_call             # no; don't change anything
        bset            &29, %d0                # yes; set sticky bit

denorm_call:
        bsr.l           dnrm_lp                 # denormalize the number
        rts

#
# all bit would have been shifted off during the denorm so simply
# calculate if the sticky should be set and clear the entire mantissa.
#
denorm_set_stky:
        mov.l           &0x20000000, %d0        # set sticky bit in return value
        mov.w           %d1, FTEMP_EX(%a0)      # load exp with threshold
        clr.l           FTEMP_HI(%a0)           # set d1 = 0 (ms mantissa)
        clr.l           FTEMP_LO(%a0)           # set d2 = 0 (ms mantissa)
        rts

#                                                                       #
# dnrm_lp(): normalize exponent/mantissa to specified threshhold        #
#                                                                       #
# INPUT:                                                                #
#       %a0        : points to the operand to be denormalized           #
#       %d0{31:29} : initial guard,round,sticky                         #
#       %d1{15:0}  : denormalization threshold                          #
# OUTPUT:                                                               #
#       %a0        : points to the denormalized operand                 #
#       %d0{31:29} : final guard,round,sticky                           #
#                                                                       #

# *** Local Equates *** #
set     GRS,            L_SCR2                  # g,r,s temp storage
set     FTEMP_LO2,      L_SCR1                  # FTEMP_LO copy

        global          dnrm_lp
dnrm_lp:

#
# make a copy of FTEMP_LO and place the g,r,s bits directly after it
# in memory so as to make the bitfield extraction for denormalization easier.
#
        mov.l           FTEMP_LO(%a0), FTEMP_LO2(%a6) # make FTEMP_LO copy
        mov.l           %d0, GRS(%a6)           # place g,r,s after it

#
# check to see how much less than the underflow threshold the operand
# exponent is.
#
        mov.l           %d1, %d0                # copy the denorm threshold
        sub.w           FTEMP_EX(%a0), %d1      # d1 = threshold - uns exponent
        ble.b           dnrm_no_lp              # d1 <= 0
        cmpi.w          %d1, &0x20              # is ( 0 <= d1 < 32) ?
        blt.b           case_1                  # yes
        cmpi.w          %d1, &0x40              # is (32 <= d1 < 64) ?
        blt.b           case_2                  # yes
        bra.w           case_3                  # (d1 >= 64)

#
# No normalization necessary
#
dnrm_no_lp:
        mov.l           GRS(%a6), %d0           # restore original g,r,s
        rts

#
# case (0<d1<32)
#
# %d0 = denorm threshold
# %d1 = "n" = amt to shift
#
#       ---------------------------------------------------------
#       |     FTEMP_HI    |     FTEMP_LO     |grs000.........000|
#       ---------------------------------------------------------
#       <-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
#       \          \                  \                  \
#        \          \                  \                  \
#         \          \                  \                  \
#          \          \                  \                  \
#           \          \                  \                  \
#            \          \                  \                  \
#             \          \                  \                  \
#              \          \                  \                  \
#       <-(n)-><-(32 - n)-><------(32)-------><------(32)------->
#       ---------------------------------------------------------
#       |0.....0| NEW_HI  |  NEW_FTEMP_LO     |grs              |
#       ---------------------------------------------------------
#
case_1:
        mov.l           %d2, -(%sp)             # create temp storage

        mov.w           %d0, FTEMP_EX(%a0)      # exponent = denorm threshold
        mov.l           &32, %d0
        sub.w           %d1, %d0                # %d0 = 32 - %d1

        cmpi.w          %d1, &29                # is shft amt >= 29
        blt.b           case1_extract           # no; no fix needed
        mov.b           GRS(%a6), %d2
        or.b            %d2, 3+FTEMP_LO2(%a6)

case1_extract:
        bfextu          FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_HI
        bfextu          FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new FTEMP_LO
        bfextu          FTEMP_LO2(%a6){%d0:&32}, %d0 # %d0 = new G,R,S

        mov.l           %d2, FTEMP_HI(%a0)      # store new FTEMP_HI
        mov.l           %d1, FTEMP_LO(%a0)      # store new FTEMP_LO

        bftst           %d0{&2:&30}             # were bits shifted off?
        beq.b           case1_sticky_clear      # no; go finish
        bset            &rnd_stky_bit, %d0      # yes; set sticky bit

case1_sticky_clear:
        and.l           &0xe0000000, %d0        # clear all but G,R,S
        mov.l           (%sp)+, %d2             # restore temp register
        rts

#
# case (32<=d1<64)
#
# %d0 = denorm threshold
# %d1 = "n" = amt to shift
#
#       ---------------------------------------------------------
#       |     FTEMP_HI    |     FTEMP_LO     |grs000.........000|
#       ---------------------------------------------------------
#       <-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)->
#       \          \                  \
#        \          \                  \
#         \          \                  -------------------
#          \          --------------------                 \
#           -------------------           \                 \
#                              \           \                 \
#                               \           \                 \
#                                \           \                 \
#       <-------(32)------><-(n)-><-(32 - n)-><------(32)------->
#       ---------------------------------------------------------
#       |0...............0|0....0| NEW_LO     |grs              |
#       ---------------------------------------------------------
#
case_2:
        mov.l           %d2, -(%sp)             # create temp storage

        mov.w           %d0, FTEMP_EX(%a0)      # exponent = denorm threshold
        subi.w          &0x20, %d1              # %d1 now between 0 and 32
        mov.l           &0x20, %d0
        sub.w           %d1, %d0                # %d0 = 32 - %d1

# subtle step here; or in the g,r,s at the bottom of FTEMP_LO to minimize
# the number of bits to check for the sticky detect.
# it only plays a role in shift amounts of 61-63.
        mov.b           GRS(%a6), %d2
        or.b            %d2, 3+FTEMP_LO2(%a6)

        bfextu          FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_LO
        bfextu          FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new G,R,S

        bftst           %d1{&2:&30}             # were any bits shifted off?
        bne.b           case2_set_sticky        # yes; set sticky bit
        bftst           FTEMP_LO2(%a6){%d0:&31} # were any bits shifted off?
        bne.b           case2_set_sticky        # yes; set sticky bit

        mov.l           %d1, %d0                # move new G,R,S to %d0
        bra.b           case2_end

case2_set_sticky:
        mov.l           %d1, %d0                # move new G,R,S to %d0
        bset            &rnd_stky_bit, %d0      # set sticky bit

case2_end:
        clr.l           FTEMP_HI(%a0)           # store FTEMP_HI = 0
        mov.l           %d2, FTEMP_LO(%a0)      # store FTEMP_LO
        and.l           &0xe0000000, %d0        # clear all but G,R,S

        mov.l           (%sp)+,%d2              # restore temp register
        rts

#
# case (d1>=64)
#
# %d0 = denorm threshold
# %d1 = amt to shift
#
case_3:
        mov.w           %d0, FTEMP_EX(%a0)      # insert denorm threshold

        cmpi.w          %d1, &65                # is shift amt > 65?
        blt.b           case3_64                # no; it's == 64
        beq.b           case3_65                # no; it's == 65

#
# case (d1>65)
#
# Shift value is > 65 and out of range. All bits are shifted off.
# Return a zero mantissa with the sticky bit set
#
        clr.l           FTEMP_HI(%a0)           # clear hi(mantissa)
        clr.l           FTEMP_LO(%a0)           # clear lo(mantissa)
        mov.l           &0x20000000, %d0        # set sticky bit
        rts

#
# case (d1 == 64)
#
#       ---------------------------------------------------------
#       |     FTEMP_HI    |     FTEMP_LO     |grs000.........000|
#       ---------------------------------------------------------
#       <-------(32)------>
#       \                  \
#        \                  \
#         \                  \
#          \                  ------------------------------
#           -------------------------------                 \
#                                          \                 \
#                                           \                 \
#                                            \                 \
#                                             <-------(32)------>
#       ---------------------------------------------------------
#       |0...............0|0................0|grs               |
#       ---------------------------------------------------------
#
case3_64:
        mov.l           FTEMP_HI(%a0), %d0      # fetch hi(mantissa)
        mov.l           %d0, %d1                # make a copy
        and.l           &0xc0000000, %d0        # extract G,R
        and.l           &0x3fffffff, %d1        # extract other bits

        bra.b           case3_complete

#
# case (d1 == 65)
#
#       ---------------------------------------------------------
#       |     FTEMP_HI    |     FTEMP_LO     |grs000.........000|
#       ---------------------------------------------------------
#       <-------(32)------>
#       \                  \
#        \                  \
#         \                  \
#          \                  ------------------------------
#           --------------------------------                \
#                                           \                \
#                                            \                \
#                                             \                \
#                                              <-------(31)----->
#       ---------------------------------------------------------
#       |0...............0|0................0|0rs               |
#       ---------------------------------------------------------
#
case3_65:
        mov.l           FTEMP_HI(%a0), %d0      # fetch hi(mantissa)
        and.l           &0x80000000, %d0        # extract R bit
        lsr.l           &0x1, %d0               # shift high bit into R bit
        and.l           &0x7fffffff, %d1        # extract other bits

case3_complete:
# last operation done was an "and" of the bits shifted off so the condition
# codes are already set so branch accordingly.
        bne.b           case3_set_sticky        # yes; go set new sticky
        tst.l           FTEMP_LO(%a0)           # were any bits shifted off?
        bne.b           case3_set_sticky        # yes; go set new sticky
        tst.b           GRS(%a6)                # were any bits shifted off?
        bne.b           case3_set_sticky        # yes; go set new sticky

#
# no bits were shifted off so don't set the sticky bit.
# the guard and
# the entire mantissa is zero.
#
        clr.l           FTEMP_HI(%a0)           # clear hi(mantissa)
        clr.l           FTEMP_LO(%a0)           # clear lo(mantissa)
        rts

#
# some bits were shifted off so set the sticky bit.
# the entire mantissa is zero.
#
case3_set_sticky:
        bset            &rnd_stky_bit,%d0       # set new sticky bit
        clr.l           FTEMP_HI(%a0)           # clear hi(mantissa)
        clr.l           FTEMP_LO(%a0)           # clear lo(mantissa)
        rts

#########################################################################
# XDEF **************************************************************** #
#       _round(): round result according to precision/mode              #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0        = ptr to input operand in internal extended format    #
#       d1(hi)    = contains rounding precision:                        #
#                       ext = $0000xxxx                                 #
#                       sgl = $0004xxxx                                 #
#                       dbl = $0008xxxx                                 #
#       d1(lo)    = contains rounding mode:                             #
#                       RN  = $xxxx0000                                 #
#                       RZ  = $xxxx0001                                 #
#                       RM  = $xxxx0002                                 #
#                       RP  = $xxxx0003                                 #
#       d0{31:29} = contains the g,r,s bits (extended)                  #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0 = pointer to rounded result                                  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       On return the value pointed to by a0 is correctly rounded,      #
#       a0 is preserved and the g-r-s bits in d0 are cleared.           #
#       The result is not typed - the tag field is invalid.  The        #
#       result is still in the internal extended format.                #
#                                                                       #
#       The INEX bit of USER_FPSR will be set if the rounded result was #
#       inexact (i.e. if any of the g-r-s bits were set).               #
#                                                                       #
#########################################################################

        global          _round
_round:
#
# ext_grs() looks at the rounding precision and sets the appropriate
# G,R,S bits.
# If (G,R,S == 0) then result is exact and round is done, else set
# the inex flag in status reg and continue.
#
        bsr.l           ext_grs                 # extract G,R,S

        tst.l           %d0                     # are G,R,S zero?
        beq.w           truncate                # yes; round is complete

        or.w            &inx2a_mask, 2+USER_FPSR(%a6) # set inex2/ainex

#
# Use rounding mode as an index into a jump table for these modes.
# All of the following assumes grs != 0.
#
        mov.w           (tbl_mode.b,%pc,%d1.w*2), %a1 # load jump offset
        jmp             (tbl_mode.b,%pc,%a1)    # jmp to rnd mode handler

tbl_mode:
        short           rnd_near - tbl_mode
        short           truncate - tbl_mode     # RZ always truncates
        short           rnd_mnus - tbl_mode
        short           rnd_plus - tbl_mode

#################################################################
#       ROUND PLUS INFINITY                                     #
#                                                               #
#       If sign of fp number = 0 (positive), then add 1 to l.   #
#################################################################
rnd_plus:
        tst.b           FTEMP_SGN(%a0)          # check for sign
        bmi.w           truncate                # if positive then truncate

        mov.l           &0xffffffff, %d0        # force g,r,s to be all f's
        swap            %d1                     # set up d1 for round prec.

        cmpi.b          %d1, &s_mode            # is prec = sgl?
        beq.w           add_sgl                 # yes
        bgt.w           add_dbl                 # no; it's dbl
        bra.w           add_ext                 # no; it's ext

#################################################################
#       ROUND MINUS INFINITY                                    #
#                                                               #
#       If sign of fp number = 1 (negative), then add 1 to l.   #
#################################################################
rnd_mnus:
        tst.b           FTEMP_SGN(%a0)          # check for sign
        bpl.w           truncate                # if negative then truncate

        mov.l           &0xffffffff, %d0        # force g,r,s to be all f's
        swap            %d1                     # set up d1 for round prec.

        cmpi.b          %d1, &s_mode            # is prec = sgl?
        beq.w           add_sgl                 # yes
        bgt.w           add_dbl                 # no; it's dbl
        bra.w           add_ext                 # no; it's ext

#################################################################
#       ROUND NEAREST                                           #
#                                                               #
#       If (g=1), then add 1 to l and if (r=s=0), then clear l  #
#       Note that this will round to even in case of a tie.     #
#################################################################
rnd_near:
        asl.l           &0x1, %d0               # shift g-bit to c-bit
        bcc.w           truncate                # if (g=1) then

        swap            %d1                     # set up d1 for round prec.

        cmpi.b          %d1, &s_mode            # is prec = sgl?
        beq.w           add_sgl                 # yes
        bgt.w           add_dbl                 # no; it's dbl
        bra.w           add_ext                 # no; it's ext

# *** LOCAL EQUATES ***
set     ad_1_sgl,       0x00000100      # constant to add 1 to l-bit in sgl prec
set     ad_1_dbl,       0x00000800      # constant to add 1 to l-bit in dbl prec

#########################
#       ADD SINGLE      #
#########################
add_sgl:
        add.l           &ad_1_sgl, FTEMP_HI(%a0)
        bcc.b           scc_clr                 # no mantissa overflow
        roxr.w          FTEMP_HI(%a0)           # shift v-bit back in
        roxr.w          FTEMP_HI+2(%a0)         # shift v-bit back in
        add.w           &0x1, FTEMP_EX(%a0)     # and incr exponent
scc_clr:
        tst.l           %d0                     # test for rs = 0
        bne.b           sgl_done
        and.w           &0xfe00, FTEMP_HI+2(%a0) # clear the l-bit
sgl_done:
        and.l           &0xffffff00, FTEMP_HI(%a0) # truncate bits beyond sgl limit
        clr.l           FTEMP_LO(%a0)           # clear d2
        rts

#########################
#       ADD EXTENDED    #
#########################
add_ext:
        addq.l          &1,FTEMP_LO(%a0)        # add 1 to l-bit
        bcc.b           xcc_clr                 # test for carry out
        addq.l          &1,FTEMP_HI(%a0)        # propagate carry
        bcc.b           xcc_clr
        roxr.w          FTEMP_HI(%a0)           # mant is 0 so restore v-bit
        roxr.w          FTEMP_HI+2(%a0)         # mant is 0 so restore v-bit
        roxr.w          FTEMP_LO(%a0)
        roxr.w          FTEMP_LO+2(%a0)
        add.w           &0x1,FTEMP_EX(%a0)      # and inc exp
xcc_clr:
        tst.l           %d0                     # test rs = 0
        bne.b           add_ext_done
        and.b           &0xfe,FTEMP_LO+3(%a0)   # clear the l bit
add_ext_done:
        rts

#########################
#       ADD DOUBLE      #
#########################
add_dbl:
        add.l           &ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb
        bcc.b           dcc_clr                 # no carry
        addq.l          &0x1, FTEMP_HI(%a0)     # propagate carry
        bcc.b           dcc_clr                 # no carry

        roxr.w          FTEMP_HI(%a0)           # mant is 0 so restore v-bit
        roxr.w          FTEMP_HI+2(%a0)         # mant is 0 so restore v-bit
        roxr.w          FTEMP_LO(%a0)
        roxr.w          FTEMP_LO+2(%a0)
        addq.w          &0x1, FTEMP_EX(%a0)     # incr exponent
dcc_clr:
        tst.l           %d0                     # test for rs = 0
        bne.b           dbl_done
        and.w           &0xf000, FTEMP_LO+2(%a0) # clear the l-bit

dbl_done:
        and.l           &0xfffff800,FTEMP_LO(%a0) # truncate bits beyond dbl limit
        rts

###########################
# Truncate all other bits #
###########################
truncate:
        swap            %d1                     # select rnd prec

        cmpi.b          %d1, &s_mode            # is prec sgl?
        beq.w           sgl_done                # yes
        bgt.b           dbl_done                # no; it's dbl
        rts                                     # no; it's ext


#
# ext_grs(): extract guard, round and sticky bits according to
#            rounding precision.
#
# INPUT
#       d0         = extended precision g,r,s (in d0{31:29})
#       d1         = {PREC,ROUND}
# OUTPUT
#       d0{31:29}  = guard, round, sticky
#
# The ext_grs extract the guard/round/sticky bits according to the
# selected rounding precision. It is called by the round subroutine
# only.  All registers except d0 are kept intact. d0 becomes an
# updated guard,round,sticky in d0{31:29}
#
# Notes: the ext_grs uses the round PREC, and therefore has to swap d1
#        prior to usage, and needs to restore d1 to original. this
#        routine is tightly tied to the round routine and not meant to
#        uphold standard subroutine calling practices.
#

ext_grs:
        swap            %d1                     # have d1.w point to round precision
        tst.b           %d1                     # is rnd prec = extended?
        bne.b           ext_grs_not_ext         # no; go handle sgl or dbl

#
# %d0 actually already hold g,r,s since _round() had it before calling
# this function. so, as long as we don't disturb it, we are "returning" it.
#
ext_grs_ext:
        swap            %d1                     # yes; return to correct positions
        rts

ext_grs_not_ext:
        movm.l          &0x3000, -(%sp)         # make some temp registers {d2/d3}

        cmpi.b          %d1, &s_mode            # is rnd prec = sgl?
        bne.b           ext_grs_dbl             # no; go handle dbl

#
# sgl:
#       96              64        40    32              0
#       -----------------------------------------------------
#       | EXP   |XXXXXXX|         |xx   |               |grs|
#       -----------------------------------------------------
#                       <--(24)--->nn\                     /
#                                  ee ---------------------
#                                  ww           |
#                                               v
#                                  gr      new sticky
#
ext_grs_sgl:
        bfextu          FTEMP_HI(%a0){&24:&2}, %d3 # sgl prec. g-r are 2 bits right
        mov.l           &30, %d2                # of the sgl prec. limits
        lsl.l           %d2, %d3                # shift g-r bits to MSB of d3
        mov.l           FTEMP_HI(%a0), %d2      # get word 2 for s-bit test
        and.l           &0x0000003f, %d2        # s bit is the or of all other
        bne.b           ext_grs_st_stky         # bits to the right of g-r
        tst.l           FTEMP_LO(%a0)           # test lower mantissa
        bne.b           ext_grs_st_stky         # if any are set, set sticky
        tst.l           %d0                     # test original g,r,s
        bne.b           ext_grs_st_stky         # if any are set, set sticky
        bra.b           ext_grs_end_sd          # if words 3 and 4 are clr, exit

#
# dbl:
#       96              64              32       11     0
#       -----------------------------------------------------
#       | EXP   |XXXXXXX|               |        |xx    |grs|
#       -----------------------------------------------------
#                                                 nn\       /
#                                                 ee -------
#                                                 ww    |
#                                                       v
#                                                 gr    new sticky
#
ext_grs_dbl:
        bfextu          FTEMP_LO(%a0){&21:&2}, %d3 # dbl-prec. g-r are 2 bits right
        mov.l           &30, %d2                # of the dbl prec. limits
        lsl.l           %d2, %d3                # shift g-r bits to the MSB of d3
        mov.l           FTEMP_LO(%a0), %d2      # get lower mantissa  for s-bit test
        and.l           &0x000001ff, %d2        # s bit is the or-ing of all
        bne.b           ext_grs_st_stky         # other bits to the right of g-r
        tst.l           %d0                     # test word original g,r,s
        bne.b           ext_grs_st_stky         # if any are set, set sticky
        bra.b           ext_grs_end_sd          # if clear, exit

ext_grs_st_stky:
        bset            &rnd_stky_bit, %d3      # set sticky bit
ext_grs_end_sd:
        mov.l           %d3, %d0                # return grs to d0

        movm.l          (%sp)+, &0xc            # restore scratch registers {d2/d3}

        swap            %d1                     # restore d1 to original
        rts

#########################################################################
# norm(): normalize the mantissa of an extended precision input. the    #
#         input operand should not be normalized already.               #
#                                                                       #
# XDEF **************************************************************** #
#       norm()                                                          #
#                                                                       #
# XREF **************************************************************** #
#       none                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer fp extended precision operand to normalize         #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = number of bit positions the mantissa was shifted           #
#       a0 = the input operand's mantissa is normalized; the exponent   #
#            is unchanged.                                              #
#                                                                       #
#########################################################################
        global          norm
norm:
        mov.l           %d2, -(%sp)             # create some temp regs
        mov.l           %d3, -(%sp)

        mov.l           FTEMP_HI(%a0), %d0      # load hi(mantissa)
        mov.l           FTEMP_LO(%a0), %d1      # load lo(mantissa)

        bfffo           %d0{&0:&32}, %d2        # how many places to shift?
        beq.b           norm_lo                 # hi(man) is all zeroes!

norm_hi:
        lsl.l           %d2, %d0                # left shift hi(man)
        bfextu          %d1{&0:%d2}, %d3        # extract lo bits

        or.l            %d3, %d0                # create hi(man)
        lsl.l           %d2, %d1                # create lo(man)

        mov.l           %d0, FTEMP_HI(%a0)      # store new hi(man)
        mov.l           %d1, FTEMP_LO(%a0)      # store new lo(man)

        mov.l           %d2, %d0                # return shift amount

        mov.l           (%sp)+, %d3             # restore temp regs
        mov.l           (%sp)+, %d2

        rts

norm_lo:
        bfffo           %d1{&0:&32}, %d2        # how many places to shift?
        lsl.l           %d2, %d1                # shift lo(man)
        add.l           &32, %d2                # add 32 to shft amount

        mov.l           %d1, FTEMP_HI(%a0)      # store hi(man)
        clr.l           FTEMP_LO(%a0)           # lo(man) is now zero

        mov.l           %d2, %d0                # return shift amount

        mov.l           (%sp)+, %d3             # restore temp regs
        mov.l           (%sp)+, %d2

        rts

#########################################################################
# unnorm_fix(): - changes an UNNORM to one of NORM, DENORM, or ZERO     #
#               - returns corresponding optype tag                      #
#                                                                       #
# XDEF **************************************************************** #
#       unnorm_fix()                                                    #
#                                                                       #
# XREF **************************************************************** #
#       norm() - normalize the mantissa                                 #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to unnormalized extended precision number          #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = optype tag - is corrected to one of NORM, DENORM, or ZERO  #
#       a0 = input operand has been converted to a norm, denorm, or     #
#            zero; both the exponent and mantissa are changed.          #
#                                                                       #
#########################################################################

        global          unnorm_fix
unnorm_fix:
        bfffo           FTEMP_HI(%a0){&0:&32}, %d0 # how many shifts are needed?
        bne.b           unnorm_shift            # hi(man) is not all zeroes

#
# hi(man) is all zeroes so see if any bits in lo(man) are set
#
unnorm_chk_lo:
        bfffo           FTEMP_LO(%a0){&0:&32}, %d0 # is operand really a zero?
        beq.w           unnorm_zero             # yes

        add.w           &32, %d0                # no; fix shift distance

#
# d0 = # shifts needed for complete normalization
#
unnorm_shift:
        clr.l           %d1                     # clear top word
        mov.w           FTEMP_EX(%a0), %d1      # extract exponent
        and.w           &0x7fff, %d1            # strip off sgn

        cmp.w           %d0, %d1                # will denorm push exp < 0?
        bgt.b           unnorm_nrm_zero         # yes; denorm only until exp = 0

#
# exponent would not go < 0. therefore, number stays normalized
#
        sub.w           %d0, %d1                # shift exponent value
        mov.w           FTEMP_EX(%a0), %d0      # load old exponent
        and.w           &0x8000, %d0            # save old sign
        or.w            %d0, %d1                # {sgn,new exp}
        mov.w           %d1, FTEMP_EX(%a0)      # insert new exponent

        bsr.l           norm                    # normalize UNNORM

        mov.b           &NORM, %d0              # return new optype tag
        rts

#
# exponent would go < 0, so only denormalize until exp = 0
#
unnorm_nrm_zero:
        cmp.b           %d1, &32                # is exp <= 32?
        bgt.b           unnorm_nrm_zero_lrg     # no; go handle large exponent

        bfextu          FTEMP_HI(%a0){%d1:&32}, %d0 # extract new hi(man)
        mov.l           %d0, FTEMP_HI(%a0)      # save new hi(man)

        mov.l           FTEMP_LO(%a0), %d0      # fetch old lo(man)
        lsl.l           %d1, %d0                # extract new lo(man)
        mov.l           %d0, FTEMP_LO(%a0)      # save new lo(man)

        and.w           &0x8000, FTEMP_EX(%a0)  # set exp = 0

        mov.b           &DENORM, %d0            # return new optype tag
        rts

#
# only mantissa bits set are in lo(man)
#
unnorm_nrm_zero_lrg:
        sub.w           &32, %d1                # adjust shft amt by 32

        mov.l           FTEMP_LO(%a0), %d0      # fetch old lo(man)
        lsl.l           %d1, %d0                # left shift lo(man)

        mov.l           %d0, FTEMP_HI(%a0)      # store new hi(man)
        clr.l           FTEMP_LO(%a0)           # lo(man) = 0

        and.w           &0x8000, FTEMP_EX(%a0)  # set exp = 0

        mov.b           &DENORM, %d0            # return new optype tag
        rts

#
# whole mantissa is zero so this UNNORM is actually a zero
#
unnorm_zero:
        and.w           &0x8000, FTEMP_EX(%a0)  # force exponent to zero

        mov.b           &ZERO, %d0              # fix optype tag
        rts

#########################################################################
# XDEF **************************************************************** #
#       set_tag_x(): return the optype of the input ext fp number       #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precision operand                      #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = value of type tag                                          #
#               one of: NORM, INF, QNAN, SNAN, DENORM, UNNORM, ZERO     #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Simply test the exponent, j-bit, and mantissa values to         #
# determine the type of operand.                                        #
#       If it's an unnormalized zero, alter the operand and force it    #
# to be a normal zero.                                                  #
#                                                                       #
#########################################################################

        global          set_tag_x
set_tag_x:
        mov.w           FTEMP_EX(%a0), %d0      # extract exponent
        andi.w          &0x7fff, %d0            # strip off sign
        cmpi.w          %d0, &0x7fff            # is (EXP == MAX)?
        beq.b           inf_or_nan_x
not_inf_or_nan_x:
        btst            &0x7,FTEMP_HI(%a0)
        beq.b           not_norm_x
is_norm_x:
        mov.b           &NORM, %d0
        rts
not_norm_x:
        tst.w           %d0                     # is exponent = 0?
        bne.b           is_unnorm_x
not_unnorm_x:
        tst.l           FTEMP_HI(%a0)
        bne.b           is_denorm_x
        tst.l           FTEMP_LO(%a0)
        bne.b           is_denorm_x
is_zero_x:
        mov.b           &ZERO, %d0
        rts
is_denorm_x:
        mov.b           &DENORM, %d0
        rts
# must distinguish now "Unnormalized zeroes" which we
# must convert to zero.
is_unnorm_x:
        tst.l           FTEMP_HI(%a0)
        bne.b           is_unnorm_reg_x
        tst.l           FTEMP_LO(%a0)
        bne.b           is_unnorm_reg_x
# it's an "unnormalized zero". let's convert it to an actual zero...
        andi.w          &0x8000,FTEMP_EX(%a0)   # clear exponent
        mov.b           &ZERO, %d0
        rts
is_unnorm_reg_x:
        mov.b           &UNNORM, %d0
        rts
inf_or_nan_x:
        tst.l           FTEMP_LO(%a0)
        bne.b           is_nan_x
        mov.l           FTEMP_HI(%a0), %d0
        and.l           &0x7fffffff, %d0        # msb is a don't care!
        bne.b           is_nan_x
is_inf_x:
        mov.b           &INF, %d0
        rts
is_nan_x:
        btst            &0x6, FTEMP_HI(%a0)
        beq.b           is_snan_x
        mov.b           &QNAN, %d0
        rts
is_snan_x:
        mov.b           &SNAN, %d0
        rts

#########################################################################
# XDEF **************************************************************** #
#       set_tag_d(): return the optype of the input dbl fp number       #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = points to double precision operand                         #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = value of type tag                                          #
#               one of: NORM, INF, QNAN, SNAN, DENORM, ZERO             #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Simply test the exponent, j-bit, and mantissa values to         #
# determine the type of operand.                                        #
#                                                                       #
#########################################################################

        global          set_tag_d
set_tag_d:
        mov.l           FTEMP(%a0), %d0
        mov.l           %d0, %d1

        andi.l          &0x7ff00000, %d0
        beq.b           zero_or_denorm_d

        cmpi.l          %d0, &0x7ff00000
        beq.b           inf_or_nan_d

is_norm_d:
        mov.b           &NORM, %d0
        rts
zero_or_denorm_d:
        and.l           &0x000fffff, %d1
        bne             is_denorm_d
        tst.l           4+FTEMP(%a0)
        bne             is_denorm_d
is_zero_d:
        mov.b           &ZERO, %d0
        rts
is_denorm_d:
        mov.b           &DENORM, %d0
        rts
inf_or_nan_d:
        and.l           &0x000fffff, %d1
        bne             is_nan_d
        tst.l           4+FTEMP(%a0)
        bne             is_nan_d
is_inf_d:
        mov.b           &INF, %d0
        rts
is_nan_d:
        btst            &19, %d1
        bne             is_qnan_d
is_snan_d:
        mov.b           &SNAN, %d0
        rts
is_qnan_d:
        mov.b           &QNAN, %d0
        rts

#########################################################################
# XDEF **************************************************************** #
#       set_tag_s(): return the optype of the input sgl fp number       #
#                                                                       #
# XREF **************************************************************** #
#       None                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to single precision operand                        #
#                                                                       #
# OUTPUT ************************************************************** #
#       d0 = value of type tag                                          #
#               one of: NORM, INF, QNAN, SNAN, DENORM, ZERO             #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Simply test the exponent, j-bit, and mantissa values to         #
# determine the type of operand.                                        #
#                                                                       #
#########################################################################

        global          set_tag_s
set_tag_s:
        mov.l           FTEMP(%a0), %d0
        mov.l           %d0, %d1

        andi.l          &0x7f800000, %d0
        beq.b           zero_or_denorm_s

        cmpi.l          %d0, &0x7f800000
        beq.b           inf_or_nan_s

is_norm_s:
        mov.b           &NORM, %d0
        rts
zero_or_denorm_s:
        and.l           &0x007fffff, %d1
        bne             is_denorm_s
is_zero_s:
        mov.b           &ZERO, %d0
        rts
is_denorm_s:
        mov.b           &DENORM, %d0
        rts
inf_or_nan_s:
        and.l           &0x007fffff, %d1
        bne             is_nan_s
is_inf_s:
        mov.b           &INF, %d0
        rts
is_nan_s:
        btst            &22, %d1
        bne             is_qnan_s
is_snan_s:
        mov.b           &SNAN, %d0
        rts
is_qnan_s:
        mov.b           &QNAN, %d0
        rts

#########################################################################
# XDEF **************************************************************** #
#       unf_res(): routine to produce default underflow result of a     #
#                  scaled extended precision number; this is used by    #
#                  fadd/fdiv/fmul/etc. emulation routines.              #
#       unf_res4(): same as above but for fsglmul/fsgldiv which use     #
#                   single round prec and extended prec mode.           #
#                                                                       #
# XREF **************************************************************** #
#       _denorm() - denormalize according to scale factor               #
#       _round() - round denormalized number according to rnd prec      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to extended precison operand                       #
#       d0 = scale factor                                               #
#       d1 = rounding precision/mode                                    #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0 = pointer to default underflow result in extended precision  #
#       d0.b = result FPSR_cc which caller may or may not want to save  #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Convert the input operand to "internal format" which means the  #
# exponent is extended to 16 bits and the sign is stored in the unused  #
# portion of the extended precison operand. Denormalize the number      #
# according to the scale factor passed in d0. Then, round the           #
# denormalized result.                                                  #
#       Set the FPSR_exc bits as appropriate but return the cc bits in  #
# d0 in case the caller doesn't want to save them (as is the case for   #
# fmove out).                                                           #
#       unf_res4() for fsglmul/fsgldiv forces the denorm to extended    #
# precision and the rounding mode to single.                            #
#                                                                       #
#########################################################################
        global          unf_res
unf_res:
        mov.l           %d1, -(%sp)             # save rnd prec,mode on stack

        btst            &0x7, FTEMP_EX(%a0)     # make "internal" format
        sne             FTEMP_SGN(%a0)

        mov.w           FTEMP_EX(%a0), %d1      # extract exponent
        and.w           &0x7fff, %d1
        sub.w           %d0, %d1
        mov.w           %d1, FTEMP_EX(%a0)      # insert 16 bit exponent

        mov.l           %a0, -(%sp)             # save operand ptr during calls

        mov.l           0x4(%sp),%d0            # pass rnd prec.
        andi.w          &0x00c0,%d0
        lsr.w           &0x4,%d0
        bsr.l           _denorm                 # denorm result

        mov.l           (%sp),%a0
        mov.w           0x6(%sp),%d1            # load prec:mode into %d1
        andi.w          &0xc0,%d1               # extract rnd prec
        lsr.w           &0x4,%d1
        swap            %d1
        mov.w           0x6(%sp),%d1
        andi.w          &0x30,%d1
        lsr.w           &0x4,%d1
        bsr.l           _round                  # round the denorm

        mov.l           (%sp)+, %a0

# result is now rounded properly. convert back to normal format
        bclr            &0x7, FTEMP_EX(%a0)     # clear sgn first; may have residue
        tst.b           FTEMP_SGN(%a0)          # is "internal result" sign set?
        beq.b           unf_res_chkifzero       # no; result is positive
        bset            &0x7, FTEMP_EX(%a0)     # set result sgn
        clr.b           FTEMP_SGN(%a0)          # clear temp sign

# the number may have become zero after rounding. set ccodes accordingly.
unf_res_chkifzero:
        clr.l           %d0
        tst.l           FTEMP_HI(%a0)           # is value now a zero?
        bne.b           unf_res_cont            # no
        tst.l           FTEMP_LO(%a0)
        bne.b           unf_res_cont            # no
#       bset            &z_bit, FPSR_CC(%a6)    # yes; set zero ccode bit
        bset            &z_bit, %d0             # yes; set zero ccode bit

unf_res_cont:

#
# can inex1 also be set along with unfl and inex2???
#
# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
#
        btst            &inex2_bit, FPSR_EXCEPT(%a6) # is INEX2 set?
        beq.b           unf_res_end             # no
        bset            &aunfl_bit, FPSR_AEXCEPT(%a6) # yes; set aunfl

unf_res_end:
        add.l           &0x4, %sp               # clear stack
        rts

# unf_res() for fsglmul() and fsgldiv().
        global          unf_res4
unf_res4:
        mov.l           %d1,-(%sp)              # save rnd prec,mode on stack

        btst            &0x7,FTEMP_EX(%a0)      # make "internal" format
        sne             FTEMP_SGN(%a0)

        mov.w           FTEMP_EX(%a0),%d1       # extract exponent
        and.w           &0x7fff,%d1
        sub.w           %d0,%d1
        mov.w           %d1,FTEMP_EX(%a0)       # insert 16 bit exponent

        mov.l           %a0,-(%sp)              # save operand ptr during calls

        clr.l           %d0                     # force rnd prec = ext
        bsr.l           _denorm                 # denorm result

        mov.l           (%sp),%a0
        mov.w           &s_mode,%d1             # force rnd prec = sgl
        swap            %d1
        mov.w           0x6(%sp),%d1            # load rnd mode
        andi.w          &0x30,%d1               # extract rnd prec
        lsr.w           &0x4,%d1
        bsr.l           _round                  # round the denorm

        mov.l           (%sp)+,%a0

# result is now rounded properly. convert back to normal format
        bclr            &0x7,FTEMP_EX(%a0)      # clear sgn first; may have residue
        tst.b           FTEMP_SGN(%a0)          # is "internal result" sign set?
        beq.b           unf_res4_chkifzero      # no; result is positive
        bset            &0x7,FTEMP_EX(%a0)      # set result sgn
        clr.b           FTEMP_SGN(%a0)          # clear temp sign

# the number may have become zero after rounding. set ccodes accordingly.
unf_res4_chkifzero:
        clr.l           %d0
        tst.l           FTEMP_HI(%a0)           # is value now a zero?
        bne.b           unf_res4_cont           # no
        tst.l           FTEMP_LO(%a0)
        bne.b           unf_res4_cont           # no
#       bset            &z_bit,FPSR_CC(%a6)     # yes; set zero ccode bit
        bset            &z_bit,%d0              # yes; set zero ccode bit

unf_res4_cont:

#
# can inex1 also be set along with unfl and inex2???
#
# we know that underflow has occurred. aunfl should be set if INEX2 is also set.
#
        btst            &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set?
        beq.b           unf_res4_end            # no
        bset            &aunfl_bit,FPSR_AEXCEPT(%a6) # yes; set aunfl

unf_res4_end:
        add.l           &0x4,%sp                # clear stack
        rts

#########################################################################
# XDEF **************************************************************** #
#       ovf_res(): routine to produce the default overflow result of    #
#                  an overflowing number.                               #
#       ovf_res2(): same as above but the rnd mode/prec are passed      #
#                   differently.                                        #
#                                                                       #
# XREF **************************************************************** #
#       none                                                            #
#                                                                       #
# INPUT *************************************************************** #
#       d1.b    = '-1' => (-); '0' => (+)                               #
#   ovf_res():                                                          #
#       d0      = rnd mode/prec                                         #
#   ovf_res2():                                                         #
#       hi(d0)  = rnd prec                                              #
#       lo(d0)  = rnd mode                                              #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0      = points to extended precision result                   #
#       d0.b    = condition code bits                                   #
#                                                                       #
# ALGORITHM *********************************************************** #
#       The default overflow result can be determined by the sign of    #
# the result and the rounding mode/prec in effect. These bits are       #
# concatenated together to create an index into the default result      #
# table. A pointer to the correct result is returned in a0. The         #
# resulting condition codes are returned in d0 in case the caller       #
# doesn't want FPSR_cc altered (as is the case for fmove out).          #
#                                                                       #
#########################################################################

        global          ovf_res
ovf_res:
        andi.w          &0x10,%d1               # keep result sign
        lsr.b           &0x4,%d0                # shift prec/mode
        or.b            %d0,%d1                 # concat the two
        mov.w           %d1,%d0                 # make a copy
        lsl.b           &0x1,%d1                # multiply d1 by 2
        bra.b           ovf_res_load

        global          ovf_res2
ovf_res2:
        and.w           &0x10, %d1              # keep result sign
        or.b            %d0, %d1                # insert rnd mode
        swap            %d0
        or.b            %d0, %d1                # insert rnd prec
        mov.w           %d1, %d0                # make a copy
        lsl.b           &0x1, %d1               # shift left by 1

#
# use the rounding mode, precision, and result sign as in index into the
# two tables below to fetch the default result and the result ccodes.
#
ovf_res_load:
        mov.b           (tbl_ovfl_cc.b,%pc,%d0.w*1), %d0 # fetch result ccodes
        lea             (tbl_ovfl_result.b,%pc,%d1.w*8), %a0 # return result ptr

        rts

tbl_ovfl_cc:
        byte            0x2, 0x0, 0x0, 0x2
        byte            0x2, 0x0, 0x0, 0x2
        byte            0x2, 0x0, 0x0, 0x2
        byte            0x0, 0x0, 0x0, 0x0
        byte            0x2+0x8, 0x8, 0x2+0x8, 0x8
        byte            0x2+0x8, 0x8, 0x2+0x8, 0x8
        byte            0x2+0x8, 0x8, 0x2+0x8, 0x8

tbl_ovfl_result:
        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
        long            0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RZ
        long            0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RM
        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP

        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
        long            0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RZ
        long            0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RM
        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP

        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN
        long            0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RZ
        long            0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RM
        long            0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP

        long            0x00000000,0x00000000,0x00000000,0x00000000
        long            0x00000000,0x00000000,0x00000000,0x00000000
        long            0x00000000,0x00000000,0x00000000,0x00000000
        long            0x00000000,0x00000000,0x00000000,0x00000000

        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
        long            0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RZ
        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
        long            0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RP

        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
        long            0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RZ
        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
        long            0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RP

        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN
        long            0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RZ
        long            0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM
        long            0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RP

#########################################################################
# XDEF **************************************************************** #
#       get_packed(): fetch a packed operand from memory and then       #
#                     convert it to a floating-point binary number.     #
#                                                                       #
# XREF **************************************************************** #
#       _dcalc_ea() - calculate the correct <ea>                        #
#       _mem_read() - fetch the packed operand from memory              #
#       facc_in_x() - the fetch failed so jump to special exit code     #
#       decbin()    - convert packed to binary extended precision       #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       If no failure on _mem_read():                                   #
#       FP_SRC(a6) = packed operand now as a binary FP number           #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Get the correct <ea> whihc is the value on the exception stack  #
# frame w/ maybe a correction factor if the <ea> is -(an) or (an)+.     #
# Then, fetch the operand from memory. If the fetch fails, exit         #
# through facc_in_x().                                                  #
#       If the packed operand is a ZERO,NAN, or INF, convert it to      #
# its binary representation here. Else, call decbin() which will        #
# convert the packed value to an extended precision binary value.       #
#                                                                       #
#########################################################################

# the stacked <ea> for packed is correct except for -(An).
# the base reg must be updated for both -(An) and (An)+.
        global          get_packed
get_packed:
        mov.l           &0xc,%d0                # packed is 12 bytes
        bsr.l           _dcalc_ea               # fetch <ea>; correct An

        lea             FP_SRC(%a6),%a1         # pass: ptr to super dst
        mov.l           &0xc,%d0                # pass: 12 bytes
        bsr.l           _dmem_read              # read packed operand

        tst.l           %d1                     # did dfetch fail?
        bne.l           facc_in_x               # yes

# The packed operand is an INF or a NAN if the exponent field is all ones.
        bfextu          FP_SRC(%a6){&1:&15},%d0 # get exp
        cmpi.w          %d0,&0x7fff             # INF or NAN?
        bne.b           gp_try_zero             # no
        rts                                     # operand is an INF or NAN

# The packed operand is a zero if the mantissa is all zero, else it's
# a normal packed op.
gp_try_zero:
        mov.b           3+FP_SRC(%a6),%d0       # get byte 4
        andi.b          &0x0f,%d0               # clear all but last nybble
        bne.b           gp_not_spec             # not a zero
        tst.l           FP_SRC_HI(%a6)          # is lw 2 zero?
        bne.b           gp_not_spec             # not a zero
        tst.l           FP_SRC_LO(%a6)          # is lw 3 zero?
        bne.b           gp_not_spec             # not a zero
        rts                                     # operand is a ZERO
gp_not_spec:
        lea             FP_SRC(%a6),%a0         # pass: ptr to packed op
        bsr.l           decbin                  # convert to extended
        fmovm.x         &0x80,FP_SRC(%a6)       # make this the srcop
        rts

#########################################################################
# decbin(): Converts normalized packed bcd value pointed to by register #
#           a0 to extended-precision value in fp0.                      #
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to normalized packed bcd value                     #
#                                                                       #
# OUTPUT ************************************************************** #
#       fp0 = exact fp representation of the packed bcd value.          #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Expected is a normal bcd (i.e. non-exceptional; all inf, zero,  #
#       and NaN operands are dispatched without entering this routine)  #
#       value in 68881/882 format at location (a0).                     #
#                                                                       #
#       A1. Convert the bcd exponent to binary by successive adds and   #
#       muls. Set the sign according to SE. Subtract 16 to compensate   #
#       for the mantissa which is to be interpreted as 17 integer       #
#       digits, rather than 1 integer and 16 fraction digits.           #
#       Note: this operation can never overflow.                        #
#                                                                       #
#       A2. Convert the bcd mantissa to binary by successive            #
#       adds and muls in FP0. Set the sign according to SM.             #
#       The mantissa digits will be converted with the decimal point    #
#       assumed following the least-significant digit.                  #
#       Note: this operation can never overflow.                        #
#                                                                       #
#       A3. Count the number of leading/trailing zeros in the           #
#       bcd string.  If SE is positive, count the leading zeros;        #
#       if negative, count the trailing zeros.  Set the adjusted        #
#       exponent equal to the exponent from A1 and the zero count       #
#       added if SM = 1 and subtracted if SM = 0.  Scale the            #
#       mantissa the equivalent of forcing in the bcd value:            #
#                                                                       #
#       SM = 0  a non-zero digit in the integer position                #
#       SM = 1  a non-zero digit in Mant0, lsd of the fraction          #
#                                                                       #
#       this will insure that any value, regardless of its              #
#       representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted     #
#       consistently.                                                   #
#                                                                       #
#       A4. Calculate the factor 10^exp in FP1 using a table of         #
#       10^(2^n) values.  To reduce the error in forming factors        #
#       greater than 10^27, a directed rounding scheme is used with     #
#       tables rounded to RN, RM, and RP, according to the table        #
#       in the comments of the pwrten section.                          #
#                                                                       #
#       A5. Form the final binary number by scaling the mantissa by     #
#       the exponent factor.  This is done by multiplying the           #
#       mantissa in FP0 by the factor in FP1 if the adjusted            #
#       exponent sign is positive, and dividing FP0 by FP1 if           #
#       it is negative.                                                 #
#                                                                       #
#       Clean up and return. Check if the final mul or div was inexact. #
#       If so, set INEX1 in USER_FPSR.                                  #
#                                                                       #
#########################################################################

#
#       PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded
#       to nearest, minus, and plus, respectively.  The tables include
#       10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}.  No rounding
#       is required until the power is greater than 27, however, all
#       tables include the first 5 for ease of indexing.
#
RTABLE:
        byte            0,0,0,0
        byte            2,3,2,3
        byte            2,3,3,2
        byte            3,2,2,3

        set             FNIBS,7
        set             FSTRT,0

        set             ESTRT,4
        set             EDIGITS,2

        global          decbin
decbin:
        mov.l           0x0(%a0),FP_SCR0_EX(%a6) # make a copy of input
        mov.l           0x4(%a0),FP_SCR0_HI(%a6) # so we don't alter it
        mov.l           0x8(%a0),FP_SCR0_LO(%a6)

        lea             FP_SCR0(%a6),%a0

        movm.l          &0x3c00,-(%sp)          # save d2-d5
        fmovm.x         &0x1,-(%sp)             # save fp1
#
# Calculate exponent:
#  1. Copy bcd value in memory for use as a working copy.
#  2. Calculate absolute value of exponent in d1 by mul and add.
#  3. Correct for exponent sign.
#  4. Subtract 16 to compensate for interpreting the mant as all integer digits.
#     (i.e., all digits assumed left of the decimal point.)
#
# Register usage:
#
#  calc_e:
#       (*)  d0: temp digit storage
#       (*)  d1: accumulator for binary exponent
#       (*)  d2: digit count
#       (*)  d3: offset pointer
#       ( )  d4: first word of bcd
#       ( )  a0: pointer to working bcd value
#       ( )  a6: pointer to original bcd value
#       (*)  FP_SCR1: working copy of original bcd value
#       (*)  L_SCR1: copy of original exponent word
#
calc_e:
        mov.l           &EDIGITS,%d2            # # of nibbles (digits) in fraction part
        mov.l           &ESTRT,%d3              # counter to pick up digits
        mov.l           (%a0),%d4               # get first word of bcd
        clr.l           %d1                     # zero d1 for accumulator
e_gd:
        mulu.l          &0xa,%d1                # mul partial product by one digit place
        bfextu          %d4{%d3:&4},%d0         # get the digit and zero extend into d0
        add.l           %d0,%d1                 # d1 = d1 + d0
        addq.b          &4,%d3                  # advance d3 to the next digit
        dbf.w           %d2,e_gd                # if we have used all 3 digits, exit loop
        btst            &30,%d4                 # get SE
        beq.b           e_pos                   # don't negate if pos
        neg.l           %d1                     # negate before subtracting
e_pos:
        sub.l           &16,%d1                 # sub to compensate for shift of mant
        bge.b           e_save                  # if still pos, do not neg
        neg.l           %d1                     # now negative, make pos and set SE
        or.l            &0x40000000,%d4         # set SE in d4,
        or.l            &0x40000000,(%a0)       # and in working bcd
e_save:
        mov.l           %d1,-(%sp)              # save exp on stack
#
#
# Calculate mantissa:
#  1. Calculate absolute value of mantissa in fp0 by mul and add.
#  2. Correct for mantissa sign.
#     (i.e., all digits assumed left of the decimal point.)
#
# Register usage:
#
#  calc_m:
#       (*)  d0: temp digit storage
#       (*)  d1: lword counter
#       (*)  d2: digit count
#       (*)  d3: offset pointer
#       ( )  d4: words 2 and 3 of bcd
#       ( )  a0: pointer to working bcd value
#       ( )  a6: pointer to original bcd value
#       (*) fp0: mantissa accumulator
#       ( )  FP_SCR1: working copy of original bcd value
#       ( )  L_SCR1: copy of original exponent word
#
calc_m:
        mov.l           &1,%d1                  # word counter, init to 1
        fmov.s          &0x00000000,%fp0        # accumulator
#
#
#  Since the packed number has a long word between the first & second parts,
#  get the integer digit then skip down & get the rest of the
#  mantissa.  We will unroll the loop once.
#
        bfextu          (%a0){&28:&4},%d0       # integer part is ls digit in long word
        fadd.b          %d0,%fp0                # add digit to sum in fp0
#
#
#  Get the rest of the mantissa.
#
loadlw:
        mov.l           (%a0,%d1.L*4),%d4       # load mantissa lonqword into d4
        mov.l           &FSTRT,%d3              # counter to pick up digits
        mov.l           &FNIBS,%d2              # reset number of digits per a0 ptr
md2b:
        fmul.s          &0x41200000,%fp0        # fp0 = fp0 * 10
        bfextu          %d4{%d3:&4},%d0         # get the digit and zero extend
        fadd.b          %d0,%fp0                # fp0 = fp0 + digit
#
#
#  If all the digits (8) in that long word have been converted (d2=0),
#  then inc d1 (=2) to point to the next long word and reset d3 to 0
#  to initialize the digit offset, and set d2 to 7 for the digit count;
#  else continue with this long word.
#
        addq.b          &4,%d3                  # advance d3 to the next digit
        dbf.w           %d2,md2b                # check for last digit in this lw
nextlw:
        addq.l          &1,%d1                  # inc lw pointer in mantissa
        cmp.l           %d1,&2                  # test for last lw
        ble.b           loadlw                  # if not, get last one
#
#  Check the sign of the mant and make the value in fp0 the same sign.
#
m_sign:
        btst            &31,(%a0)               # test sign of the mantissa
        beq.b           ap_st_z                 # if clear, go to append/strip zeros
        fneg.x          %fp0                    # if set, negate fp0
#
# Append/strip zeros:
#
#  For adjusted exponents which have an absolute value greater than 27*,
#  this routine calculates the amount needed to normalize the mantissa
#  for the adjusted exponent.  That number is subtracted from the exp
#  if the exp was positive, and added if it was negative.  The purpose
#  of this is to reduce the value of the exponent and the possibility
#  of error in calculation of pwrten.
#
#  1. Branch on the sign of the adjusted exponent.
#  2p.(positive exp)
#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
#   3. Add one for each zero encountered until a non-zero digit.
#   4. Subtract the count from the exp.
#   5. Check if the exp has crossed zero in #3 above; make the exp abs
#          and set SE.
#       6. Multiply the mantissa by 10**count.
#  2n.(negative exp)
#   2. Check the digits in lwords 3 and 2 in decending order.
#   3. Add one for each zero encountered until a non-zero digit.
#   4. Add the count to the exp.
#   5. Check if the exp has crossed zero in #3 above; clear SE.
#   6. Divide the mantissa by 10**count.
#
#  *Why 27?  If the adjusted exponent is within -28 < expA < 28, than
#   any adjustment due to append/strip zeros will drive the resultane
#   exponent towards zero.  Since all pwrten constants with a power
#   of 27 or less are exact, there is no need to use this routine to
#   attempt to lessen the resultant exponent.
#
# Register usage:
#
#  ap_st_z:
#       (*)  d0: temp digit storage
#       (*)  d1: zero count
#       (*)  d2: digit count
#       (*)  d3: offset pointer
#       ( )  d4: first word of bcd
#       (*)  d5: lword counter
#       ( )  a0: pointer to working bcd value
#       ( )  FP_SCR1: working copy of original bcd value
#       ( )  L_SCR1: copy of original exponent word
#
#
# First check the absolute value of the exponent to see if this
# routine is necessary.  If so, then check the sign of the exponent
# and do append (+) or strip (-) zeros accordingly.
# This section handles a positive adjusted exponent.
#
ap_st_z:
        mov.l           (%sp),%d1               # load expA for range test
        cmp.l           %d1,&27                 # test is with 27
        ble.w           pwrten                  # if abs(expA) <28, skip ap/st zeros
        btst            &30,(%a0)               # check sign of exp
        bne.b           ap_st_n                 # if neg, go to neg side
        clr.l           %d1                     # zero count reg
        mov.l           (%a0),%d4               # load lword 1 to d4
        bfextu          %d4{&28:&4},%d0         # get M16 in d0
        bne.b           ap_p_fx                 # if M16 is non-zero, go fix exp
        addq.l          &1,%d1                  # inc zero count
        mov.l           &1,%d5                  # init lword counter
        mov.l           (%a0,%d5.L*4),%d4       # get lword 2 to d4
        bne.b           ap_p_cl                 # if lw 2 is zero, skip it
        addq.l          &8,%d1                  # and inc count by 8
        addq.l          &1,%d5                  # inc lword counter
        mov.l           (%a0,%d5.L*4),%d4       # get lword 3 to d4
ap_p_cl:
        clr.l           %d3                     # init offset reg
        mov.l           &7,%d2                  # init digit counter
ap_p_gd:
        bfextu          %d4{%d3:&4},%d0         # get digit
        bne.b           ap_p_fx                 # if non-zero, go to fix exp
        addq.l          &4,%d3                  # point to next digit
        addq.l          &1,%d1                  # inc digit counter
        dbf.w           %d2,ap_p_gd             # get next digit
ap_p_fx:
        mov.l           %d1,%d0                 # copy counter to d2
        mov.l           (%sp),%d1               # get adjusted exp from memory
        sub.l           %d0,%d1                 # subtract count from exp
        bge.b           ap_p_fm                 # if still pos, go to pwrten
        neg.l           %d1                     # now its neg; get abs
        mov.l           (%a0),%d4               # load lword 1 to d4
        or.l            &0x40000000,%d4         # and set SE in d4
        or.l            &0x40000000,(%a0)       # and in memory
#
# Calculate the mantissa multiplier to compensate for the striping of
# zeros from the mantissa.
#
ap_p_fm:
        lea.l           PTENRN(%pc),%a1         # get address of power-of-ten table
        clr.l           %d3                     # init table index
        fmov.s          &0x3f800000,%fp1        # init fp1 to 1
        mov.l           &3,%d2                  # init d2 to count bits in counter
ap_p_el:
        asr.l           &1,%d0                  # shift lsb into carry
        bcc.b           ap_p_en                 # if 1, mul fp1 by pwrten factor
        fmul.x          (%a1,%d3),%fp1          # mul by 10**(d3_bit_no)
ap_p_en:
        add.l           &12,%d3                 # inc d3 to next rtable entry
        tst.l           %d0                     # check if d0 is zero
        bne.b           ap_p_el                 # if not, get next bit
        fmul.x          %fp1,%fp0               # mul mantissa by 10**(no_bits_shifted)
        bra.b           pwrten                  # go calc pwrten
#
# This section handles a negative adjusted exponent.
#
ap_st_n:
        clr.l           %d1                     # clr counter
        mov.l           &2,%d5                  # set up d5 to point to lword 3
        mov.l           (%a0,%d5.L*4),%d4       # get lword 3
        bne.b           ap_n_cl                 # if not zero, check digits
        sub.l           &1,%d5                  # dec d5 to point to lword 2
        addq.l          &8,%d1                  # inc counter by 8
        mov.l           (%a0,%d5.L*4),%d4       # get lword 2
ap_n_cl:
        mov.l           &28,%d3                 # point to last digit
        mov.l           &7,%d2                  # init digit counter
ap_n_gd:
        bfextu          %d4{%d3:&4},%d0         # get digit
        bne.b           ap_n_fx                 # if non-zero, go to exp fix
        subq.l          &4,%d3                  # point to previous digit
        addq.l          &1,%d1                  # inc digit counter
        dbf.w           %d2,ap_n_gd             # get next digit
ap_n_fx:
        mov.l           %d1,%d0                 # copy counter to d0
        mov.l           (%sp),%d1               # get adjusted exp from memory
        sub.l           %d0,%d1                 # subtract count from exp
        bgt.b           ap_n_fm                 # if still pos, go fix mantissa
        neg.l           %d1                     # take abs of exp and clr SE
        mov.l           (%a0),%d4               # load lword 1 to d4
        and.l           &0xbfffffff,%d4         # and clr SE in d4
        and.l           &0xbfffffff,(%a0)       # and in memory
#
# Calculate the mantissa multiplier to compensate for the appending of
# zeros to the mantissa.
#
ap_n_fm:
        lea.l           PTENRN(%pc),%a1         # get address of power-of-ten table
        clr.l           %d3                     # init table index
        fmov.s          &0x3f800000,%fp1        # init fp1 to 1
        mov.l           &3,%d2                  # init d2 to count bits in counter
ap_n_el:
        asr.l           &1,%d0                  # shift lsb into carry
        bcc.b           ap_n_en                 # if 1, mul fp1 by pwrten factor
        fmul.x          (%a1,%d3),%fp1          # mul by 10**(d3_bit_no)
ap_n_en:
        add.l           &12,%d3                 # inc d3 to next rtable entry
        tst.l           %d0                     # check if d0 is zero
        bne.b           ap_n_el                 # if not, get next bit
        fdiv.x          %fp1,%fp0               # div mantissa by 10**(no_bits_shifted)
#
#
# Calculate power-of-ten factor from adjusted and shifted exponent.
#
# Register usage:
#
#  pwrten:
#       (*)  d0: temp
#       ( )  d1: exponent
#       (*)  d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp
#       (*)  d3: FPCR work copy
#       ( )  d4: first word of bcd
#       (*)  a1: RTABLE pointer
#  calc_p:
#       (*)  d0: temp
#       ( )  d1: exponent
#       (*)  d3: PWRTxx table index
#       ( )  a0: pointer to working copy of bcd
#       (*)  a1: PWRTxx pointer
#       (*) fp1: power-of-ten accumulator
#
# Pwrten calculates the exponent factor in the selected rounding mode
# according to the following table:
#
#       Sign of Mant  Sign of Exp  Rounding Mode  PWRTEN Rounding Mode
#
#       ANY       ANY   RN      RN
#
#        +         +    RP      RP
#        -         +    RP      RM
#        +         -    RP      RM
#        -         -    RP      RP
#
#        +         +    RM      RM
#        -         +    RM      RP
#        +         -    RM      RP
#        -         -    RM      RM
#
#        +         +    RZ      RM
#        -         +    RZ      RM
#        +         -    RZ      RP
#        -         -    RZ      RP
#
#
pwrten:
        mov.l           USER_FPCR(%a6),%d3      # get user's FPCR
        bfextu          %d3{&26:&2},%d2         # isolate rounding mode bits
        mov.l           (%a0),%d4               # reload 1st bcd word to d4
        asl.l           &2,%d2                  # format d2 to be
        bfextu          %d4{&0:&2},%d0          # {FPCR[6],FPCR[5],SM,SE}
        add.l           %d0,%d2                 # in d2 as index into RTABLE
        lea.l           RTABLE(%pc),%a1         # load rtable base
        mov.b           (%a1,%d2),%d0           # load new rounding bits from table
        clr.l           %d3                     # clear d3 to force no exc and extended
        bfins           %d0,%d3{&26:&2}         # stuff new rounding bits in FPCR
        fmov.l          %d3,%fpcr               # write new FPCR
        asr.l           &1,%d0                  # write correct PTENxx table
        bcc.b           not_rp                  # to a1
        lea.l           PTENRP(%pc),%a1         # it is RP
        bra.b           calc_p                  # go to init section
not_rp:
        asr.l           &1,%d0                  # keep checking
        bcc.b           not_rm
        lea.l           PTENRM(%pc),%a1         # it is RM
        bra.b           calc_p                  # go to init section
not_rm:
        lea.l           PTENRN(%pc),%a1         # it is RN
calc_p:
        mov.l           %d1,%d0                 # copy exp to d0;use d0
        bpl.b           no_neg                  # if exp is negative,
        neg.l           %d0                     # invert it
        or.l            &0x40000000,(%a0)       # and set SE bit
no_neg:
        clr.l           %d3                     # table index
        fmov.s          &0x3f800000,%fp1        # init fp1 to 1
e_loop:
        asr.l           &1,%d0                  # shift next bit into carry
        bcc.b           e_next                  # if zero, skip the mul
        fmul.x          (%a1,%d3),%fp1          # mul by 10**(d3_bit_no)
e_next:
        add.l           &12,%d3                 # inc d3 to next rtable entry
        tst.l           %d0                     # check if d0 is zero
        bne.b           e_loop                  # not zero, continue shifting
#
#
#  Check the sign of the adjusted exp and make the value in fp0 the
#  same sign. If the exp was pos then multiply fp1*fp0;
#  else divide fp0/fp1.
#
# Register Usage:
#  norm:
#       ( )  a0: pointer to working bcd value
#       (*) fp0: mantissa accumulator
#       ( ) fp1: scaling factor - 10**(abs(exp))
#
pnorm:
        btst            &30,(%a0)               # test the sign of the exponent
        beq.b           mul                     # if clear, go to multiply
div:
        fdiv.x          %fp1,%fp0               # exp is negative, so divide mant by exp
        bra.b           end_dec
mul:
        fmul.x          %fp1,%fp0               # exp is positive, so multiply by exp
#
#
# Clean up and return with result in fp0.
#
# If the final mul/div in decbin incurred an inex exception,
# it will be inex2, but will be reported as inex1 by get_op.
#
end_dec:
        fmov.l          %fpsr,%d0               # get status register
        bclr            &inex2_bit+8,%d0        # test for inex2 and clear it
        beq.b           no_exc                  # skip this if no exc
        ori.w           &inx1a_mask,2+USER_FPSR(%a6) # set INEX1/AINEX
no_exc:
        add.l           &0x4,%sp                # clear 1 lw param
        fmovm.x         (%sp)+,&0x40            # restore fp1
        movm.l          (%sp)+,&0x3c            # restore d2-d5
        fmov.l          &0x0,%fpcr
        fmov.l          &0x0,%fpsr
        rts

#########################################################################
# bindec(): Converts an input in extended precision format to bcd format#
#                                                                       #
# INPUT *************************************************************** #
#       a0 = pointer to the input extended precision value in memory.   #
#            the input may be either normalized, unnormalized, or       #
#            denormalized.                                              #
#       d0 = contains the k-factor sign-extended to 32-bits.            #
#                                                                       #
# OUTPUT ************************************************************** #
#       FP_SCR0(a6) = bcd format result on the stack.                   #
#                                                                       #
# ALGORITHM *********************************************************** #
#                                                                       #
#       A1.     Set RM and size ext;  Set SIGMA = sign of input.        #
#               The k-factor is saved for use in d7. Clear the          #
#               BINDEC_FLG for separating normalized/denormalized       #
#               input.  If input is unnormalized or denormalized,       #
#               normalize it.                                           #
#                                                                       #
#       A2.     Set X = abs(input).                                     #
#                                                                       #
#       A3.     Compute ILOG.                                           #
#               ILOG is the log base 10 of the input value.  It is      #
#               approximated by adding e + 0.f when the original        #
#               value is viewed as 2^^e * 1.f in extended precision.    #
#               This value is stored in d6.                             #
#                                                                       #
#       A4.     Clr INEX bit.                                           #
#               The operation in A3 above may have set INEX2.           #
#                                                                       #
#       A5.     Set ICTR = 0;                                           #
#               ICTR is a flag used in A13.  It must be set before the  #
#               loop entry A6.                                          #
#                                                                       #
#       A6.     Calculate LEN.                                          #
#               LEN is the number of digits to be displayed.  The       #
#               k-factor can dictate either the total number of digits, #
#               if it is a positive number, or the number of digits     #
#               after the decimal point which are to be included as     #
#               significant.  See the 68882 manual for examples.        #
#               If LEN is computed to be greater than 17, set OPERR in  #
#               USER_FPSR.  LEN is stored in d4.                        #
#                                                                       #
#       A7.     Calculate SCALE.                                        #
#               SCALE is equal to 10^ISCALE, where ISCALE is the number #
#               of decimal places needed to insure LEN integer digits   #
#               in the output before conversion to bcd. LAMBDA is the   #
#               sign of ISCALE, used in A9. Fp1 contains                #
#               10^^(abs(ISCALE)) using a rounding mode which is a      #
#               function of the original rounding mode and the signs    #
#               of ISCALE and X.  A table is given in the code.         #
#                                                                       #
#       A8.     Clr INEX; Force RZ.                                     #
#               The operation in A3 above may have set INEX2.           #
#               RZ mode is forced for the scaling operation to insure   #
#               only one rounding error.  The grs bits are collected in #
#               the INEX flag for use in A10.                           #
#                                                                       #
#       A9.     Scale X -> Y.                                           #
#               The mantissa is scaled to the desired number of         #
#               significant digits.  The excess digits are collected    #
#               in INEX2.                                               #
#                                                                       #
#       A10.    Or in INEX.                                             #
#               If INEX is set, round error occurred.  This is          #
#               compensated for by 'or-ing' in the INEX2 flag to        #
#               the lsb of Y.                                           #
#                                                                       #
#       A11.    Restore original FPCR; set size ext.                    #
#               Perform FINT operation in the user's rounding mode.     #
#               Keep the size to extended.                              #
#                                                                       #
#       A12.    Calculate YINT = FINT(Y) according to user's rounding   #
#               mode.  The FPSP routine sintd0 is used.  The output     #
#               is in fp0.                                              #
#                                                                       #
#       A13.    Check for LEN digits.                                   #
#               If the int operation results in more than LEN digits,   #
#               or less than LEN -1 digits, adjust ILOG and repeat from #
#               A6.  This test occurs only on the first pass.  If the   #
#               result is exactly 10^LEN, decrement ILOG and divide     #
#               the mantissa by 10.                                     #
#                                                                       #
#       A14.    Convert the mantissa to bcd.                            #
#               The binstr routine is used to convert the LEN digit     #
#               mantissa to bcd in memory.  The input to binstr is      #
#               to be a fraction; i.e. (mantissa)/10^LEN and adjusted   #
#               such that the decimal point is to the left of bit 63.   #
#               The bcd digits are stored in the correct position in    #
#               the final string area in memory.                        #
#                                                                       #
#       A15.    Convert the exponent to bcd.                            #
#               As in A14 above, the exp is converted to bcd and the    #
#               digits are stored in the final string.                  #
#               Test the length of the final exponent string.  If the   #
#               length is 4, set operr.                                 #
#                                                                       #
#       A16.    Write sign bits to final string.                        #
#                                                                       #
#########################################################################

set     BINDEC_FLG,     EXC_TEMP        # DENORM flag

# Constants in extended precision
PLOG2:
        long            0x3FFD0000,0x9A209A84,0xFBCFF798,0x00000000
PLOG2UP1:
        long            0x3FFD0000,0x9A209A84,0xFBCFF799,0x00000000

# Constants in single precision
FONE:
        long            0x3F800000,0x00000000,0x00000000,0x00000000
FTWO:
        long            0x40000000,0x00000000,0x00000000,0x00000000
FTEN:
        long            0x41200000,0x00000000,0x00000000,0x00000000
F4933:
        long            0x459A2800,0x00000000,0x00000000,0x00000000

RBDTBL:
        byte            0,0,0,0
        byte            3,3,2,2
        byte            3,2,2,3
        byte            2,3,3,2

#       Implementation Notes:
#
#       The registers are used as follows:
#
#               d0: scratch; LEN input to binstr
#               d1: scratch
#               d2: upper 32-bits of mantissa for binstr
#               d3: scratch;lower 32-bits of mantissa for binstr
#               d4: LEN
#               d5: LAMBDA/ICTR
#               d6: ILOG
#               d7: k-factor
#               a0: ptr for original operand/final result
#               a1: scratch pointer
#               a2: pointer to FP_X; abs(original value) in ext
#               fp0: scratch
#               fp1: scratch
#               fp2: scratch
#               F_SCR1:
#               F_SCR2:
#               L_SCR1:
#               L_SCR2:

        global          bindec
bindec:
        movm.l          &0x3f20,-(%sp)  #  {%d2-%d7/%a2}
        fmovm.x         &0x7,-(%sp)     #  {%fp0-%fp2}

# A1. Set RM and size ext. Set SIGMA = sign input;
#     The k-factor is saved for use in d7.  Clear BINDEC_FLG for
#     separating  normalized/denormalized input.  If the input
#     is a denormalized number, set the BINDEC_FLG memory word
#     to signal denorm.  If the input is unnormalized, normalize
#     the input and test for denormalized result.
#
        fmov.l          &rm_mode*0x10,%fpcr     # set RM and ext
        mov.l           (%a0),L_SCR2(%a6)       # save exponent for sign check
        mov.l           %d0,%d7         # move k-factor to d7

        clr.b           BINDEC_FLG(%a6) # clr norm/denorm flag
        cmpi.b          STAG(%a6),&DENORM # is input a DENORM?
        bne.w           A2_str          # no; input is a NORM

#
# Normalize the denorm
#
un_de_norm:
        mov.w           (%a0),%d0
        and.w           &0x7fff,%d0     # strip sign of normalized exp
        mov.l           4(%a0),%d1
        mov.l           8(%a0),%d2
norm_loop:
        sub.w           &1,%d0
        lsl.l           &1,%d2
        roxl.l          &1,%d1
        tst.l           %d1
        bge.b           norm_loop
#
# Test if the normalized input is denormalized
#
        tst.w           %d0
        bgt.b           pos_exp         # if greater than zero, it is a norm
        st              BINDEC_FLG(%a6) # set flag for denorm
pos_exp:
        and.w           &0x7fff,%d0     # strip sign of normalized exp
        mov.w           %d0,(%a0)
        mov.l           %d1,4(%a0)
        mov.l           %d2,8(%a0)

# A2. Set X = abs(input).
#
A2_str:
        mov.l           (%a0),FP_SCR1(%a6)      # move input to work space
        mov.l           4(%a0),FP_SCR1+4(%a6)   # move input to work space
        mov.l           8(%a0),FP_SCR1+8(%a6)   # move input to work space
        and.l           &0x7fffffff,FP_SCR1(%a6)        # create abs(X)

# A3. Compute ILOG.
#     ILOG is the log base 10 of the input value.  It is approx-
#     imated by adding e + 0.f when the original value is viewed
#     as 2^^e * 1.f in extended precision.  This value is stored
#     in d6.
#
# Register usage:
#       Input/Output
#       d0: k-factor/exponent
#       d2: x/x
#       d3: x/x
#       d4: x/x
#       d5: x/x
#       d6: x/ILOG
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/final result
#       a1: x/x
#       a2: x/x
#       fp0: x/float(ILOG)
#       fp1: x/x
#       fp2: x/x
#       F_SCR1:x/x
#       F_SCR2:Abs(X)/Abs(X) with $3fff exponent
#       L_SCR1:x/x
#       L_SCR2:first word of X packed/Unchanged

        tst.b           BINDEC_FLG(%a6) # check for denorm
        beq.b           A3_cont         # if clr, continue with norm
        mov.l           &-4933,%d6      # force ILOG = -4933
        bra.b           A4_str
A3_cont:
        mov.w           FP_SCR1(%a6),%d0        # move exp to d0
        mov.w           &0x3fff,FP_SCR1(%a6)    # replace exponent with 0x3fff
        fmov.x          FP_SCR1(%a6),%fp0       # now fp0 has 1.f
        sub.w           &0x3fff,%d0     # strip off bias
        fadd.w          %d0,%fp0        # add in exp
        fsub.s          FONE(%pc),%fp0  # subtract off 1.0
        fbge.w          pos_res         # if pos, branch
        fmul.x          PLOG2UP1(%pc),%fp0      # if neg, mul by LOG2UP1
        fmov.l          %fp0,%d6        # put ILOG in d6 as a lword
        bra.b           A4_str          # go move out ILOG
pos_res:
        fmul.x          PLOG2(%pc),%fp0 # if pos, mul by LOG2
        fmov.l          %fp0,%d6        # put ILOG in d6 as a lword


# A4. Clr INEX bit.
#     The operation in A3 above may have set INEX2.

A4_str:
        fmov.l          &0,%fpsr        # zero all of fpsr - nothing needed


# A5. Set ICTR = 0;
#     ICTR is a flag used in A13.  It must be set before the
#     loop entry A6. The lower word of d5 is used for ICTR.

        clr.w           %d5             # clear ICTR

# A6. Calculate LEN.
#     LEN is the number of digits to be displayed.  The k-factor
#     can dictate either the total number of digits, if it is
#     a positive number, or the number of digits after the
#     original decimal point which are to be included as
#     significant.  See the 68882 manual for examples.
#     If LEN is computed to be greater than 17, set OPERR in
#     USER_FPSR.  LEN is stored in d4.
#
# Register usage:
#       Input/Output
#       d0: exponent/Unchanged
#       d2: x/x/scratch
#       d3: x/x
#       d4: exc picture/LEN
#       d5: ICTR/Unchanged
#       d6: ILOG/Unchanged
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/final result
#       a1: x/x
#       a2: x/x
#       fp0: float(ILOG)/Unchanged
#       fp1: x/x
#       fp2: x/x
#       F_SCR1:x/x
#       F_SCR2:Abs(X) with $3fff exponent/Unchanged
#       L_SCR1:x/x
#       L_SCR2:first word of X packed/Unchanged

A6_str:
        tst.l           %d7             # branch on sign of k
        ble.b           k_neg           # if k <= 0, LEN = ILOG + 1 - k
        mov.l           %d7,%d4         # if k > 0, LEN = k
        bra.b           len_ck          # skip to LEN check
k_neg:
        mov.l           %d6,%d4         # first load ILOG to d4
        sub.l           %d7,%d4         # subtract off k
        addq.l          &1,%d4          # add in the 1
len_ck:
        tst.l           %d4             # LEN check: branch on sign of LEN
        ble.b           LEN_ng          # if neg, set LEN = 1
        cmp.l           %d4,&17         # test if LEN > 17
        ble.b           A7_str          # if not, forget it
        mov.l           &17,%d4         # set max LEN = 17
        tst.l           %d7             # if negative, never set OPERR
        ble.b           A7_str          # if positive, continue
        or.l            &opaop_mask,USER_FPSR(%a6)      # set OPERR & AIOP in USER_FPSR
        bra.b           A7_str          # finished here
LEN_ng:
        mov.l           &1,%d4          # min LEN is 1


# A7. Calculate SCALE.
#     SCALE is equal to 10^ISCALE, where ISCALE is the number
#     of decimal places needed to insure LEN integer digits
#     in the output before conversion to bcd. LAMBDA is the sign
#     of ISCALE, used in A9.  Fp1 contains 10^^(abs(ISCALE)) using
#     the rounding mode as given in the following table (see
#     Coonen, p. 7.23 as ref.; however, the SCALE variable is
#     of opposite sign in bindec.sa from Coonen).
#
#       Initial                                 USE
#       FPCR[6:5]       LAMBDA  SIGN(X)         FPCR[6:5]
#       ----------------------------------------------
#        RN     00         0       0            00/0    RN
#        RN     00         0       1            00/0    RN
#        RN     00         1       0            00/0    RN
#        RN     00         1       1            00/0    RN
#        RZ     01         0       0            11/3    RP
#        RZ     01         0       1            11/3    RP
#        RZ     01         1       0            10/2    RM
#        RZ     01         1       1            10/2    RM
#        RM     10         0       0            11/3    RP
#        RM     10         0       1            10/2    RM
#        RM     10         1       0            10/2    RM
#        RM     10         1       1            11/3    RP
#        RP     11         0       0            10/2    RM
#        RP     11         0       1            11/3    RP
#        RP     11         1       0            11/3    RP
#        RP     11         1       1            10/2    RM
#
# Register usage:
#       Input/Output
#       d0: exponent/scratch - final is 0
#       d2: x/0 or 24 for A9
#       d3: x/scratch - offset ptr into PTENRM array
#       d4: LEN/Unchanged
#       d5: 0/ICTR:LAMBDA
#       d6: ILOG/ILOG or k if ((k<=0)&(ILOG<k))
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/final result
#       a1: x/ptr to PTENRM array
#       a2: x/x
#       fp0: float(ILOG)/Unchanged
#       fp1: x/10^ISCALE
#       fp2: x/x
#       F_SCR1:x/x
#       F_SCR2:Abs(X) with $3fff exponent/Unchanged
#       L_SCR1:x/x
#       L_SCR2:first word of X packed/Unchanged

A7_str:
        tst.l           %d7             # test sign of k
        bgt.b           k_pos           # if pos and > 0, skip this
        cmp.l           %d7,%d6         # test k - ILOG
        blt.b           k_pos           # if ILOG >= k, skip this
        mov.l           %d7,%d6         # if ((k<0) & (ILOG < k)) ILOG = k
k_pos:
        mov.l           %d6,%d0         # calc ILOG + 1 - LEN in d0
        addq.l          &1,%d0          # add the 1
        sub.l           %d4,%d0         # sub off LEN
        swap            %d5             # use upper word of d5 for LAMBDA
        clr.w           %d5             # set it zero initially
        clr.w           %d2             # set up d2 for very small case
        tst.l           %d0             # test sign of ISCALE
        bge.b           iscale          # if pos, skip next inst
        addq.w          &1,%d5          # if neg, set LAMBDA true
        cmp.l           %d0,&0xffffecd4 # test iscale <= -4908
        bgt.b           no_inf          # if false, skip rest
        add.l           &24,%d0         # add in 24 to iscale
        mov.l           &24,%d2         # put 24 in d2 for A9
no_inf:
        neg.l           %d0             # and take abs of ISCALE
iscale:
        fmov.s          FONE(%pc),%fp1  # init fp1 to 1
        bfextu          USER_FPCR(%a6){&26:&2},%d1      # get initial rmode bits
        lsl.w           &1,%d1          # put them in bits 2:1
        add.w           %d5,%d1         # add in LAMBDA
        lsl.w           &1,%d1          # put them in bits 3:1
        tst.l           L_SCR2(%a6)     # test sign of original x
        bge.b           x_pos           # if pos, don't set bit 0
        addq.l          &1,%d1          # if neg, set bit 0
x_pos:
        lea.l           RBDTBL(%pc),%a2 # load rbdtbl base
        mov.b           (%a2,%d1),%d3   # load d3 with new rmode
        lsl.l           &4,%d3          # put bits in proper position
        fmov.l          %d3,%fpcr       # load bits into fpu
        lsr.l           &4,%d3          # put bits in proper position
        tst.b           %d3             # decode new rmode for pten table
        bne.b           not_rn          # if zero, it is RN
        lea.l           PTENRN(%pc),%a1 # load a1 with RN table base
        bra.b           rmode           # exit decode
not_rn:
        lsr.b           &1,%d3          # get lsb in carry
        bcc.b           not_rp2         # if carry clear, it is RM
        lea.l           PTENRP(%pc),%a1 # load a1 with RP table base
        bra.b           rmode           # exit decode
not_rp2:
        lea.l           PTENRM(%pc),%a1 # load a1 with RM table base
rmode:
        clr.l           %d3             # clr table index
e_loop2:
        lsr.l           &1,%d0          # shift next bit into carry
        bcc.b           e_next2         # if zero, skip the mul
        fmul.x          (%a1,%d3),%fp1  # mul by 10**(d3_bit_no)
e_next2:
        add.l           &12,%d3         # inc d3 to next pwrten table entry
        tst.l           %d0             # test if ISCALE is zero
        bne.b           e_loop2         # if not, loop

# A8. Clr INEX; Force RZ.
#     The operation in A3 above may have set INEX2.
#     RZ mode is forced for the scaling operation to insure
#     only one rounding error.  The grs bits are collected in
#     the INEX flag for use in A10.
#
# Register usage:
#       Input/Output

        fmov.l          &0,%fpsr        # clr INEX
        fmov.l          &rz_mode*0x10,%fpcr     # set RZ rounding mode

# A9. Scale X -> Y.
#     The mantissa is scaled to the desired number of significant
#     digits.  The excess digits are collected in INEX2. If mul,
#     Check d2 for excess 10 exponential value.  If not zero,
#     the iscale value would have caused the pwrten calculation
#     to overflow.  Only a negative iscale can cause this, so
#     multiply by 10^(d2), which is now only allowed to be 24,
#     with a multiply by 10^8 and 10^16, which is exact since
#     10^24 is exact.  If the input was denormalized, we must
#     create a busy stack frame with the mul command and the
#     two operands, and allow the fpu to complete the multiply.
#
# Register usage:
#       Input/Output
#       d0: FPCR with RZ mode/Unchanged
#       d2: 0 or 24/unchanged
#       d3: x/x
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA
#       d6: ILOG/Unchanged
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/final result
#       a1: ptr to PTENRM array/Unchanged
#       a2: x/x
#       fp0: float(ILOG)/X adjusted for SCALE (Y)
#       fp1: 10^ISCALE/Unchanged
#       fp2: x/x
#       F_SCR1:x/x
#       F_SCR2:Abs(X) with $3fff exponent/Unchanged
#       L_SCR1:x/x
#       L_SCR2:first word of X packed/Unchanged

A9_str:
        fmov.x          (%a0),%fp0      # load X from memory
        fabs.x          %fp0            # use abs(X)
        tst.w           %d5             # LAMBDA is in lower word of d5
        bne.b           sc_mul          # if neg (LAMBDA = 1), scale by mul
        fdiv.x          %fp1,%fp0       # calculate X / SCALE -> Y to fp0
        bra.w           A10_st          # branch to A10

sc_mul:
        tst.b           BINDEC_FLG(%a6) # check for denorm
        beq.w           A9_norm         # if norm, continue with mul

# for DENORM, we must calculate:
#       fp0 = input_op * 10^ISCALE * 10^24
# since the input operand is a DENORM, we can't multiply it directly.
# so, we do the multiplication of the exponents and mantissas separately.
# in this way, we avoid underflow on intermediate stages of the
# multiplication and guarantee a result without exception.
        fmovm.x         &0x2,-(%sp)     # save 10^ISCALE to stack

        mov.w           (%sp),%d3       # grab exponent
        andi.w          &0x7fff,%d3     # clear sign
        ori.w           &0x8000,(%a0)   # make DENORM exp negative
        add.w           (%a0),%d3       # add DENORM exp to 10^ISCALE exp
        subi.w          &0x3fff,%d3     # subtract BIAS
        add.w           36(%a1),%d3
        subi.w          &0x3fff,%d3     # subtract BIAS
        add.w           48(%a1),%d3
        subi.w          &0x3fff,%d3     # subtract BIAS

        bmi.w           sc_mul_err      # is result is DENORM, punt!!!

        andi.w          &0x8000,(%sp)   # keep sign
        or.w            %d3,(%sp)       # insert new exponent
        andi.w          &0x7fff,(%a0)   # clear sign bit on DENORM again
        mov.l           0x8(%a0),-(%sp) # put input op mantissa on stk
        mov.l           0x4(%a0),-(%sp)
        mov.l           &0x3fff0000,-(%sp) # force exp to zero
        fmovm.x         (%sp)+,&0x80    # load normalized DENORM into fp0
        fmul.x          (%sp)+,%fp0

#       fmul.x  36(%a1),%fp0    # multiply fp0 by 10^8
#       fmul.x  48(%a1),%fp0    # multiply fp0 by 10^16
        mov.l           36+8(%a1),-(%sp) # get 10^8 mantissa
        mov.l           36+4(%a1),-(%sp)
        mov.l           &0x3fff0000,-(%sp) # force exp to zero
        mov.l           48+8(%a1),-(%sp) # get 10^16 mantissa
        mov.l           48+4(%a1),-(%sp)
        mov.l           &0x3fff0000,-(%sp)# force exp to zero
        fmul.x          (%sp)+,%fp0     # multiply fp0 by 10^8
        fmul.x          (%sp)+,%fp0     # multiply fp0 by 10^16
        bra.b           A10_st

sc_mul_err:
        bra.b           sc_mul_err

A9_norm:
        tst.w           %d2             # test for small exp case
        beq.b           A9_con          # if zero, continue as normal
        fmul.x          36(%a1),%fp0    # multiply fp0 by 10^8
        fmul.x          48(%a1),%fp0    # multiply fp0 by 10^16
A9_con:
        fmul.x          %fp1,%fp0       # calculate X * SCALE -> Y to fp0

# A10. Or in INEX.
#      If INEX is set, round error occurred.  This is compensated
#      for by 'or-ing' in the INEX2 flag to the lsb of Y.
#
# Register usage:
#       Input/Output
#       d0: FPCR with RZ mode/FPSR with INEX2 isolated
#       d2: x/x
#       d3: x/x
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA
#       d6: ILOG/Unchanged
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/final result
#       a1: ptr to PTENxx array/Unchanged
#       a2: x/ptr to FP_SCR1(a6)
#       fp0: Y/Y with lsb adjusted
#       fp1: 10^ISCALE/Unchanged
#       fp2: x/x

A10_st:
        fmov.l          %fpsr,%d0       # get FPSR
        fmov.x          %fp0,FP_SCR1(%a6)       # move Y to memory
        lea.l           FP_SCR1(%a6),%a2        # load a2 with ptr to FP_SCR1
        btst            &9,%d0          # check if INEX2 set
        beq.b           A11_st          # if clear, skip rest
        or.l            &1,8(%a2)       # or in 1 to lsb of mantissa
        fmov.x          FP_SCR1(%a6),%fp0       # write adjusted Y back to fpu


# A11. Restore original FPCR; set size ext.
#      Perform FINT operation in the user's rounding mode.  Keep
#      the size to extended.  The sintdo entry point in the sint
#      routine expects the FPCR value to be in USER_FPCR for
#      mode and precision.  The original FPCR is saved in L_SCR1.

A11_st:
        mov.l           USER_FPCR(%a6),L_SCR1(%a6)      # save it for later
        and.l           &0x00000030,USER_FPCR(%a6)      # set size to ext,
#                                       ;block exceptions


# A12. Calculate YINT = FINT(Y) according to user's rounding mode.
#      The FPSP routine sintd0 is used.  The output is in fp0.
#
# Register usage:
#       Input/Output
#       d0: FPSR with AINEX cleared/FPCR with size set to ext
#       d2: x/x/scratch
#       d3: x/x
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA/Unchanged
#       d6: ILOG/Unchanged
#       d7: k-factor/Unchanged
#       a0: ptr for original operand/src ptr for sintdo
#       a1: ptr to PTENxx array/Unchanged
#       a2: ptr to FP_SCR1(a6)/Unchanged
#       a6: temp pointer to FP_SCR1(a6) - orig value saved and restored
#       fp0: Y/YINT
#       fp1: 10^ISCALE/Unchanged
#       fp2: x/x
#       F_SCR1:x/x
#       F_SCR2:Y adjusted for inex/Y with original exponent
#       L_SCR1:x/original USER_FPCR
#       L_SCR2:first word of X packed/Unchanged

A12_st:
        movm.l  &0xc0c0,-(%sp)  # save regs used by sintd0       {%d0-%d1/%a0-%a1}
        mov.l   L_SCR1(%a6),-(%sp)
        mov.l   L_SCR2(%a6),-(%sp)

        lea.l           FP_SCR1(%a6),%a0        # a0 is ptr to FP_SCR1(a6)
        fmov.x          %fp0,(%a0)      # move Y to memory at FP_SCR1(a6)
        tst.l           L_SCR2(%a6)     # test sign of original operand
        bge.b           do_fint12               # if pos, use Y
        or.l            &0x80000000,(%a0)       # if neg, use -Y
do_fint12:
        mov.l   USER_FPSR(%a6),-(%sp)
#       bsr     sintdo          # sint routine returns int in fp0

        fmov.l  USER_FPCR(%a6),%fpcr
        fmov.l  &0x0,%fpsr                      # clear the AEXC bits!!!
##      mov.l           USER_FPCR(%a6),%d0      # ext prec/keep rnd mode
##      andi.l          &0x00000030,%d0
##      fmov.l          %d0,%fpcr
        fint.x          FP_SCR1(%a6),%fp0       # do fint()
        fmov.l  %fpsr,%d0
        or.w    %d0,FPSR_EXCEPT(%a6)
##      fmov.l          &0x0,%fpcr
##      fmov.l          %fpsr,%d0               # don't keep ccodes
##      or.w            %d0,FPSR_EXCEPT(%a6)

        mov.b   (%sp),USER_FPSR(%a6)
        add.l   &4,%sp

        mov.l   (%sp)+,L_SCR2(%a6)
        mov.l   (%sp)+,L_SCR1(%a6)
        movm.l  (%sp)+,&0x303   # restore regs used by sint      {%d0-%d1/%a0-%a1}

        mov.l   L_SCR2(%a6),FP_SCR1(%a6)        # restore original exponent
        mov.l   L_SCR1(%a6),USER_FPCR(%a6)      # restore user's FPCR

# A13. Check for LEN digits.
#      If the int operation results in more than LEN digits,
#      or less than LEN -1 digits, adjust ILOG and repeat from
#      A6.  This test occurs only on the first pass.  If the
#      result is exactly 10^LEN, decrement ILOG and divide
#      the mantissa by 10.  The calculation of 10^LEN cannot
#      be inexact, since all powers of ten upto 10^27 are exact
#      in extended precision, so the use of a previous power-of-ten
#      table will introduce no error.
#
#
# Register usage:
#       Input/Output
#       d0: FPCR with size set to ext/scratch final = 0
#       d2: x/x
#       d3: x/scratch final = x
#       d4: LEN/LEN adjusted
#       d5: ICTR:LAMBDA/LAMBDA:ICTR
#       d6: ILOG/ILOG adjusted
#       d7: k-factor/Unchanged
#       a0: pointer into memory for packed bcd string formation
#       a1: ptr to PTENxx array/Unchanged
#       a2: ptr to FP_SCR1(a6)/Unchanged
#       fp0: int portion of Y/abs(YINT) adjusted
#       fp1: 10^ISCALE/Unchanged
#       fp2: x/10^LEN
#       F_SCR1:x/x
#       F_SCR2:Y with original exponent/Unchanged
#       L_SCR1:original USER_FPCR/Unchanged
#       L_SCR2:first word of X packed/Unchanged

A13_st:
        swap            %d5             # put ICTR in lower word of d5
        tst.w           %d5             # check if ICTR = 0
        bne             not_zr          # if non-zero, go to second test
#
# Compute 10^(LEN-1)
#
        fmov.s          FONE(%pc),%fp2  # init fp2 to 1.0
        mov.l           %d4,%d0         # put LEN in d0
        subq.l          &1,%d0          # d0 = LEN -1
        clr.l           %d3             # clr table index
l_loop:
        lsr.l           &1,%d0          # shift next bit into carry
        bcc.b           l_next          # if zero, skip the mul
        fmul.x          (%a1,%d3),%fp2  # mul by 10**(d3_bit_no)
l_next:
        add.l           &12,%d3         # inc d3 to next pwrten table entry
        tst.l           %d0             # test if LEN is zero
        bne.b           l_loop          # if not, loop
#
# 10^LEN-1 is computed for this test and A14.  If the input was
# denormalized, check only the case in which YINT > 10^LEN.
#
        tst.b           BINDEC_FLG(%a6) # check if input was norm
        beq.b           A13_con         # if norm, continue with checking
        fabs.x          %fp0            # take abs of YINT
        bra             test_2
#
# Compare abs(YINT) to 10^(LEN-1) and 10^LEN
#
A13_con:
        fabs.x          %fp0            # take abs of YINT
        fcmp.x          %fp0,%fp2       # compare abs(YINT) with 10^(LEN-1)
        fbge.w          test_2          # if greater, do next test
        subq.l          &1,%d6          # subtract 1 from ILOG
        mov.w           &1,%d5          # set ICTR
        fmov.l          &rm_mode*0x10,%fpcr     # set rmode to RM
        fmul.s          FTEN(%pc),%fp2  # compute 10^LEN
        bra.w           A6_str          # return to A6 and recompute YINT
test_2:
        fmul.s          FTEN(%pc),%fp2  # compute 10^LEN
        fcmp.x          %fp0,%fp2       # compare abs(YINT) with 10^LEN
        fblt.w          A14_st          # if less, all is ok, go to A14
        fbgt.w          fix_ex          # if greater, fix and redo
        fdiv.s          FTEN(%pc),%fp0  # if equal, divide by 10
        addq.l          &1,%d6          # and inc ILOG
        bra.b           A14_st          # and continue elsewhere
fix_ex:
        addq.l          &1,%d6          # increment ILOG by 1
        mov.w           &1,%d5          # set ICTR
        fmov.l          &rm_mode*0x10,%fpcr     # set rmode to RM
        bra.w           A6_str          # return to A6 and recompute YINT
#
# Since ICTR <> 0, we have already been through one adjustment,
# and shouldn't have another; this is to check if abs(YINT) = 10^LEN
# 10^LEN is again computed using whatever table is in a1 since the
# value calculated cannot be inexact.
#
not_zr:
        fmov.s          FONE(%pc),%fp2  # init fp2 to 1.0
        mov.l           %d4,%d0         # put LEN in d0
        clr.l           %d3             # clr table index
z_loop:
        lsr.l           &1,%d0          # shift next bit into carry
        bcc.b           z_next          # if zero, skip the mul
        fmul.x          (%a1,%d3),%fp2  # mul by 10**(d3_bit_no)
z_next:
        add.l           &12,%d3         # inc d3 to next pwrten table entry
        tst.l           %d0             # test if LEN is zero
        bne.b           z_loop          # if not, loop
        fabs.x          %fp0            # get abs(YINT)
        fcmp.x          %fp0,%fp2       # check if abs(YINT) = 10^LEN
        fbneq.w         A14_st          # if not, skip this
        fdiv.s          FTEN(%pc),%fp0  # divide abs(YINT) by 10
        addq.l          &1,%d6          # and inc ILOG by 1
        addq.l          &1,%d4          # and inc LEN
        fmul.s          FTEN(%pc),%fp2  # if LEN++, the get 10^^LEN

# A14. Convert the mantissa to bcd.
#      The binstr routine is used to convert the LEN digit
#      mantissa to bcd in memory.  The input to binstr is
#      to be a fraction; i.e. (mantissa)/10^LEN and adjusted
#      such that the decimal point is to the left of bit 63.
#      The bcd digits are stored in the correct position in
#      the final string area in memory.
#
#
# Register usage:
#       Input/Output
#       d0: x/LEN call to binstr - final is 0
#       d1: x/0
#       d2: x/ms 32-bits of mant of abs(YINT)
#       d3: x/ls 32-bits of mant of abs(YINT)
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA/LAMBDA:ICTR
#       d6: ILOG
#       d7: k-factor/Unchanged
#       a0: pointer into memory for packed bcd string formation
#           /ptr to first mantissa byte in result string
#       a1: ptr to PTENxx array/Unchanged
#       a2: ptr to FP_SCR1(a6)/Unchanged
#       fp0: int portion of Y/abs(YINT) adjusted
#       fp1: 10^ISCALE/Unchanged
#       fp2: 10^LEN/Unchanged
#       F_SCR1:x/Work area for final result
#       F_SCR2:Y with original exponent/Unchanged
#       L_SCR1:original USER_FPCR/Unchanged
#       L_SCR2:first word of X packed/Unchanged

A14_st:
        fmov.l          &rz_mode*0x10,%fpcr     # force rz for conversion
        fdiv.x          %fp2,%fp0       # divide abs(YINT) by 10^LEN
        lea.l           FP_SCR0(%a6),%a0
        fmov.x          %fp0,(%a0)      # move abs(YINT)/10^LEN to memory
        mov.l           4(%a0),%d2      # move 2nd word of FP_RES to d2
        mov.l           8(%a0),%d3      # move 3rd word of FP_RES to d3
        clr.l           4(%a0)          # zero word 2 of FP_RES
        clr.l           8(%a0)          # zero word 3 of FP_RES
        mov.l           (%a0),%d0       # move exponent to d0
        swap            %d0             # put exponent in lower word
        beq.b           no_sft          # if zero, don't shift
        sub.l           &0x3ffd,%d0     # sub bias less 2 to make fract
        tst.l           %d0             # check if > 1
        bgt.b           no_sft          # if so, don't shift
        neg.l           %d0             # make exp positive
m_loop:
        lsr.l           &1,%d2          # shift d2:d3 right, add 0s
        roxr.l          &1,%d3          # the number of places
        dbf.w           %d0,m_loop      # given in d0
no_sft:
        tst.l           %d2             # check for mantissa of zero
        bne.b           no_zr           # if not, go on
        tst.l           %d3             # continue zero check
        beq.b           zer_m           # if zero, go directly to binstr
no_zr:
        clr.l           %d1             # put zero in d1 for addx
        add.l           &0x00000080,%d3 # inc at bit 7
        addx.l          %d1,%d2         # continue inc
        and.l           &0xffffff80,%d3 # strip off lsb not used by 882
zer_m:
        mov.l           %d4,%d0         # put LEN in d0 for binstr call
        addq.l          &3,%a0          # a0 points to M16 byte in result
        bsr             binstr          # call binstr to convert mant


# A15. Convert the exponent to bcd.
#      As in A14 above, the exp is converted to bcd and the
#      digits are stored in the final string.
#
#      Digits are stored in L_SCR1(a6) on return from BINDEC as:
#
#        32               16 15                0
#       -----------------------------------------
#       |  0 | e3 | e2 | e1 | e4 |  X |  X |  X |
#       -----------------------------------------
#
# And are moved into their proper places in FP_SCR0.  If digit e4
# is non-zero, OPERR is signaled.  In all cases, all 4 digits are
# written as specified in the 881/882 manual for packed decimal.
#
# Register usage:
#       Input/Output
#       d0: x/LEN call to binstr - final is 0
#       d1: x/scratch (0);shift count for final exponent packing
#       d2: x/ms 32-bits of exp fraction/scratch
#       d3: x/ls 32-bits of exp fraction
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA/LAMBDA:ICTR
#       d6: ILOG
#       d7: k-factor/Unchanged
#       a0: ptr to result string/ptr to L_SCR1(a6)
#       a1: ptr to PTENxx array/Unchanged
#       a2: ptr to FP_SCR1(a6)/Unchanged
#       fp0: abs(YINT) adjusted/float(ILOG)
#       fp1: 10^ISCALE/Unchanged
#       fp2: 10^LEN/Unchanged
#       F_SCR1:Work area for final result/BCD result
#       F_SCR2:Y with original exponent/ILOG/10^4
#       L_SCR1:original USER_FPCR/Exponent digits on return from binstr
#       L_SCR2:first word of X packed/Unchanged

A15_st:
        tst.b           BINDEC_FLG(%a6) # check for denorm
        beq.b           not_denorm
        ftest.x         %fp0            # test for zero
        fbeq.w          den_zero        # if zero, use k-factor or 4933
        fmov.l          %d6,%fp0        # float ILOG
        fabs.x          %fp0            # get abs of ILOG
        bra.b           convrt
den_zero:
        tst.l           %d7             # check sign of the k-factor
        blt.b           use_ilog        # if negative, use ILOG
        fmov.s          F4933(%pc),%fp0 # force exponent to 4933
        bra.b           convrt          # do it
use_ilog:
        fmov.l          %d6,%fp0        # float ILOG
        fabs.x          %fp0            # get abs of ILOG
        bra.b           convrt
not_denorm:
        ftest.x         %fp0            # test for zero
        fbneq.w         not_zero        # if zero, force exponent
        fmov.s          FONE(%pc),%fp0  # force exponent to 1
        bra.b           convrt          # do it
not_zero:
        fmov.l          %d6,%fp0        # float ILOG
        fabs.x          %fp0            # get abs of ILOG
convrt:
        fdiv.x          24(%a1),%fp0    # compute ILOG/10^4
        fmov.x          %fp0,FP_SCR1(%a6)       # store fp0 in memory
        mov.l           4(%a2),%d2      # move word 2 to d2
        mov.l           8(%a2),%d3      # move word 3 to d3
        mov.w           (%a2),%d0       # move exp to d0
        beq.b           x_loop_fin      # if zero, skip the shift
        sub.w           &0x3ffd,%d0     # subtract off bias
        neg.w           %d0             # make exp positive
x_loop:
        lsr.l           &1,%d2          # shift d2:d3 right
        roxr.l          &1,%d3          # the number of places
        dbf.w           %d0,x_loop      # given in d0
x_loop_fin:
        clr.l           %d1             # put zero in d1 for addx
        add.l           &0x00000080,%d3 # inc at bit 6
        addx.l          %d1,%d2         # continue inc
        and.l           &0xffffff80,%d3 # strip off lsb not used by 882
        mov.l           &4,%d0          # put 4 in d0 for binstr call
        lea.l           L_SCR1(%a6),%a0 # a0 is ptr to L_SCR1 for exp digits
        bsr             binstr          # call binstr to convert exp
        mov.l           L_SCR1(%a6),%d0 # load L_SCR1 lword to d0
        mov.l           &12,%d1         # use d1 for shift count
        lsr.l           %d1,%d0         # shift d0 right by 12
        bfins           %d0,FP_SCR0(%a6){&4:&12}        # put e3:e2:e1 in FP_SCR0
        lsr.l           %d1,%d0         # shift d0 right by 12
        bfins           %d0,FP_SCR0(%a6){&16:&4}        # put e4 in FP_SCR0
        tst.b           %d0             # check if e4 is zero
        beq.b           A16_st          # if zero, skip rest
        or.l            &opaop_mask,USER_FPSR(%a6)      # set OPERR & AIOP in USER_FPSR


# A16. Write sign bits to final string.
#          Sigma is bit 31 of initial value; RHO is bit 31 of d6 (ILOG).
#
# Register usage:
#       Input/Output
#       d0: x/scratch - final is x
#       d2: x/x
#       d3: x/x
#       d4: LEN/Unchanged
#       d5: ICTR:LAMBDA/LAMBDA:ICTR
#       d6: ILOG/ILOG adjusted
#       d7: k-factor/Unchanged
#       a0: ptr to L_SCR1(a6)/Unchanged
#       a1: ptr to PTENxx array/Unchanged
#       a2: ptr to FP_SCR1(a6)/Unchanged
#       fp0: float(ILOG)/Unchanged
#       fp1: 10^ISCALE/Unchanged
#       fp2: 10^LEN/Unchanged
#       F_SCR1:BCD result with correct signs
#       F_SCR2:ILOG/10^4
#       L_SCR1:Exponent digits on return from binstr
#       L_SCR2:first word of X packed/Unchanged

A16_st:
        clr.l           %d0             # clr d0 for collection of signs
        and.b           &0x0f,FP_SCR0(%a6)      # clear first nibble of FP_SCR0
        tst.l           L_SCR2(%a6)     # check sign of original mantissa
        bge.b           mant_p          # if pos, don't set SM
        mov.l           &2,%d0          # move 2 in to d0 for SM
mant_p:
        tst.l           %d6             # check sign of ILOG
        bge.b           wr_sgn          # if pos, don't set SE
        addq.l          &1,%d0          # set bit 0 in d0 for SE
wr_sgn:
        bfins           %d0,FP_SCR0(%a6){&0:&2} # insert SM and SE into FP_SCR0

# Clean up and restore all registers used.

        fmov.l          &0,%fpsr        # clear possible inex2/ainex bits
        fmovm.x         (%sp)+,&0xe0    #  {%fp0-%fp2}
        movm.l          (%sp)+,&0x4fc   #  {%d2-%d7/%a2}
        rts

        global          PTENRN
PTENRN:
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59E        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D5        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CE0        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8E        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C7        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C17        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE5        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979B        # 10 ^ 4096

        global          PTENRP
PTENRP:
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59E        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D6        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CE0        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8E        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C7        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C18        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE5        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979B        # 10 ^ 4096

        global          PTENRM
PTENRM:
        long            0x40020000,0xA0000000,0x00000000        # 10 ^ 1
        long            0x40050000,0xC8000000,0x00000000        # 10 ^ 2
        long            0x400C0000,0x9C400000,0x00000000        # 10 ^ 4
        long            0x40190000,0xBEBC2000,0x00000000        # 10 ^ 8
        long            0x40340000,0x8E1BC9BF,0x04000000        # 10 ^ 16
        long            0x40690000,0x9DC5ADA8,0x2B70B59D        # 10 ^ 32
        long            0x40D30000,0xC2781F49,0xFFCFA6D5        # 10 ^ 64
        long            0x41A80000,0x93BA47C9,0x80E98CDF        # 10 ^ 128
        long            0x43510000,0xAA7EEBFB,0x9DF9DE8D        # 10 ^ 256
        long            0x46A30000,0xE319A0AE,0xA60E91C6        # 10 ^ 512
        long            0x4D480000,0xC9767586,0x81750C17        # 10 ^ 1024
        long            0x5A920000,0x9E8B3B5D,0xC53D5DE4        # 10 ^ 2048
        long            0x75250000,0xC4605202,0x8A20979A        # 10 ^ 4096

#########################################################################
# binstr(): Converts a 64-bit binary integer to bcd.                    #
#                                                                       #
# INPUT *************************************************************** #
#       d2:d3 = 64-bit binary integer                                   #
#       d0    = desired length (LEN)                                    #
#       a0    = pointer to start in memory for bcd characters           #
#               (This pointer must point to byte 4 of the first         #
#                lword of the packed decimal memory string.)            #
#                                                                       #
# OUTPUT ************************************************************** #
#       a0 = pointer to LEN bcd digits representing the 64-bit integer. #
#                                                                       #
# ALGORITHM *********************************************************** #
#       The 64-bit binary is assumed to have a decimal point before     #
#       bit 63.  The fraction is multiplied by 10 using a mul by 2      #
#       shift and a mul by 8 shift.  The bits shifted out of the        #
#       msb form a decimal digit.  This process is iterated until       #
#       LEN digits are formed.                                          #
#                                                                       #
# A1. Init d7 to 1.  D7 is the byte digit counter, and if 1, the        #
#     digit formed will be assumed the least significant.  This is      #
#     to force the first byte formed to have a 0 in the upper 4 bits.   #
#                                                                       #
# A2. Beginning of the loop:                                            #
#     Copy the fraction in d2:d3 to d4:d5.                              #
#                                                                       #
# A3. Multiply the fraction in d2:d3 by 8 using bit-field               #
#     extracts and shifts.  The three msbs from d2 will go into d1.     #
#                                                                       #
# A4. Multiply the fraction in d4:d5 by 2 using shifts.  The msb        #
#     will be collected by the carry.                                   #
#                                                                       #
# A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5      #
#     into d2:d3.  D1 will contain the bcd digit formed.                #
#                                                                       #
# A6. Test d7.  If zero, the digit formed is the ms digit.  If non-     #
#     zero, it is the ls digit.  Put the digit in its place in the      #
#     upper word of d0.  If it is the ls digit, write the word          #
#     from d0 to memory.                                                #
#                                                                       #
# A7. Decrement d6 (LEN counter) and repeat the loop until zero.        #
#                                                                       #
#########################################################################

#       Implementation Notes:
#
#       The registers are used as follows:
#
#               d0: LEN counter
#               d1: temp used to form the digit
#               d2: upper 32-bits of fraction for mul by 8
#               d3: lower 32-bits of fraction for mul by 8
#               d4: upper 32-bits of fraction for mul by 2
#               d5: lower 32-bits of fraction for mul by 2
#               d6: temp for bit-field extracts
#               d7: byte digit formation word;digit count {0,1}
#               a0: pointer into memory for packed bcd string formation
#

        global          binstr
binstr:
        movm.l          &0xff00,-(%sp)  #  {%d0-%d7}

#
# A1: Init d7
#
        mov.l           &1,%d7          # init d7 for second digit
        subq.l          &1,%d0          # for dbf d0 would have LEN+1 passes
#
# A2. Copy d2:d3 to d4:d5.  Start loop.
#
loop:
        mov.l           %d2,%d4         # copy the fraction before muls
        mov.l           %d3,%d5         # to d4:d5
#
# A3. Multiply d2:d3 by 8; extract msbs into d1.
#
        bfextu          %d2{&0:&3},%d1  # copy 3 msbs of d2 into d1
        asl.l           &3,%d2          # shift d2 left by 3 places
        bfextu          %d3{&0:&3},%d6  # copy 3 msbs of d3 into d6
        asl.l           &3,%d3          # shift d3 left by 3 places
        or.l            %d6,%d2         # or in msbs from d3 into d2
#
# A4. Multiply d4:d5 by 2; add carry out to d1.
#
        asl.l           &1,%d5          # mul d5 by 2
        roxl.l          &1,%d4          # mul d4 by 2
        swap            %d6             # put 0 in d6 lower word
        addx.w          %d6,%d1         # add in extend from mul by 2
#
# A5. Add mul by 8 to mul by 2.  D1 contains the digit formed.
#
        add.l           %d5,%d3         # add lower 32 bits
        nop                             # ERRATA FIX #13 (Rev. 1.2 6/6/90)
        addx.l          %d4,%d2         # add with extend upper 32 bits
        nop                             # ERRATA FIX #13 (Rev. 1.2 6/6/90)
        addx.w          %d6,%d1         # add in extend from add to d1
        swap            %d6             # with d6 = 0; put 0 in upper word
#
# A6. Test d7 and branch.
#
        tst.w           %d7             # if zero, store digit & to loop
        beq.b           first_d         # if non-zero, form byte & write
sec_d:
        swap            %d7             # bring first digit to word d7b
        asl.w           &4,%d7          # first digit in upper 4 bits d7b
        add.w           %d1,%d7         # add in ls digit to d7b
        mov.b           %d7,(%a0)+      # store d7b byte in memory
        swap            %d7             # put LEN counter in word d7a
        clr.w           %d7             # set d7a to signal no digits done
        dbf.w           %d0,loop        # do loop some more!
        bra.b           end_bstr        # finished, so exit
first_d:
        swap            %d7             # put digit word in d7b
        mov.w           %d1,%d7         # put new digit in d7b
        swap            %d7             # put LEN counter in word d7a
        addq.w          &1,%d7          # set d7a to signal first digit done
        dbf.w           %d0,loop        # do loop some more!
        swap            %d7             # put last digit in string
        lsl.w           &4,%d7          # move it to upper 4 bits
        mov.b           %d7,(%a0)+      # store it in memory string
#
# Clean up and return with result in fp0.
#
end_bstr:
        movm.l          (%sp)+,&0xff    #  {%d0-%d7}
        rts

#########################################################################
# XDEF **************************************************************** #
#       facc_in_b(): dmem_read_byte failed                              #
#       facc_in_w(): dmem_read_word failed                              #
#       facc_in_l(): dmem_read_long failed                              #
#       facc_in_d(): dmem_read of dbl prec failed                       #
#       facc_in_x(): dmem_read of ext prec failed                       #
#                                                                       #
#       facc_out_b(): dmem_write_byte failed                            #
#       facc_out_w(): dmem_write_word failed                            #
#       facc_out_l(): dmem_write_long failed                            #
#       facc_out_d(): dmem_write of dbl prec failed                     #
#       facc_out_x(): dmem_write of ext prec failed                     #
#                                                                       #
# XREF **************************************************************** #
#       _real_access() - exit through access error handler              #
#                                                                       #
# INPUT *************************************************************** #
#       None                                                            #
#                                                                       #
# OUTPUT ************************************************************** #
#       None                                                            #
#                                                                       #
# ALGORITHM *********************************************************** #
#       Flow jumps here when an FP data fetch call gets an error        #
# result. This means the operating system wants an access error frame   #
# made out of the current exception stack frame.                        #
#       So, we first call restore() which makes sure that any updated   #
# -(an)+ register gets returned to its pre-exception value and then     #
# we change the stack to an access error stack frame.                   #
#                                                                       #
#########################################################################

facc_in_b:
        movq.l          &0x1,%d0                        # one byte
        bsr.w           restore                         # fix An

        mov.w           &0x0121,EXC_VOFF(%a6)           # set FSLW
        bra.w           facc_finish

facc_in_w:
        movq.l          &0x2,%d0                        # two bytes
        bsr.w           restore                         # fix An

        mov.w           &0x0141,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_in_l:
        movq.l          &0x4,%d0                        # four bytes
        bsr.w           restore                         # fix An

        mov.w           &0x0101,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_in_d:
        movq.l          &0x8,%d0                        # eight bytes
        bsr.w           restore                         # fix An

        mov.w           &0x0161,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_in_x:
        movq.l          &0xc,%d0                        # twelve bytes
        bsr.w           restore                         # fix An

        mov.w           &0x0161,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

################################################################

facc_out_b:
        movq.l          &0x1,%d0                        # one byte
        bsr.w           restore                         # restore An

        mov.w           &0x00a1,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_out_w:
        movq.l          &0x2,%d0                        # two bytes
        bsr.w           restore                         # restore An

        mov.w           &0x00c1,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_out_l:
        movq.l          &0x4,%d0                        # four bytes
        bsr.w           restore                         # restore An

        mov.w           &0x0081,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_out_d:
        movq.l          &0x8,%d0                        # eight bytes
        bsr.w           restore                         # restore An

        mov.w           &0x00e1,EXC_VOFF(%a6)           # set FSLW
        bra.b           facc_finish

facc_out_x:
        mov.l           &0xc,%d0                        # twelve bytes
        bsr.w           restore                         # restore An

        mov.w           &0x00e1,EXC_VOFF(%a6)           # set FSLW

# here's where we actually create the access error frame from the
# current exception stack frame.
facc_finish:
        mov.l           USER_FPIAR(%a6),EXC_PC(%a6) # store current PC

        fmovm.x         EXC_FPREGS(%a6),&0xc0   # restore fp0-fp1
        fmovm.l         USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs
        movm.l          EXC_DREGS(%a6),&0x0303  # restore d0-d1/a0-a1

        unlk            %a6

        mov.l           (%sp),-(%sp)            # store SR, hi(PC)
        mov.l           0x8(%sp),0x4(%sp)       # store lo(PC)
        mov.l           0xc(%sp),0x8(%sp)       # store EA
        mov.l           &0x00000001,0xc(%sp)    # store FSLW
        mov.w           0x6(%sp),0xc(%sp)       # fix FSLW (size)
        mov.w           &0x4008,0x6(%sp)        # store voff

        btst            &0x5,(%sp)              # supervisor or user mode?
        beq.b           facc_out2               # user
        bset            &0x2,0xd(%sp)           # set supervisor TM bit

facc_out2:
        bra.l           _real_access

##################################################################

# if the effective addressing mode was predecrement or postincrement,
# the emulation has already changed its value to the correct post-
# instruction value. but since we're exiting to the access error
# handler, then AN must be returned to its pre-instruction value.
# we do that here.
restore:
        mov.b           EXC_OPWORD+0x1(%a6),%d1
        andi.b          &0x38,%d1               # extract opmode
        cmpi.b          %d1,&0x18               # postinc?
        beq.w           rest_inc
        cmpi.b          %d1,&0x20               # predec?
        beq.w           rest_dec
        rts

rest_inc:
        mov.b           EXC_OPWORD+0x1(%a6),%d1
        andi.w          &0x0007,%d1             # fetch An

        mov.w           (tbl_rest_inc.b,%pc,%d1.w*2),%d1
        jmp             (tbl_rest_inc.b,%pc,%d1.w*1)

tbl_rest_inc:
        short           ri_a0 - tbl_rest_inc
        short           ri_a1 - tbl_rest_inc
        short           ri_a2 - tbl_rest_inc
        short           ri_a3 - tbl_rest_inc
        short           ri_a4 - tbl_rest_inc
        short           ri_a5 - tbl_rest_inc
        short           ri_a6 - tbl_rest_inc
        short           ri_a7 - tbl_rest_inc

ri_a0:
        sub.l           %d0,EXC_DREGS+0x8(%a6)  # fix stacked a0
        rts
ri_a1:
        sub.l           %d0,EXC_DREGS+0xc(%a6)  # fix stacked a1
        rts
ri_a2:
        sub.l           %d0,%a2                 # fix a2
        rts
ri_a3:
        sub.l           %d0,%a3                 # fix a3
        rts
ri_a4:
        sub.l           %d0,%a4                 # fix a4
        rts
ri_a5:
        sub.l           %d0,%a5                 # fix a5
        rts
ri_a6:
        sub.l           %d0,(%a6)               # fix stacked a6
        rts
# if it's a fmove out instruction, we don't have to fix a7
# because we hadn't changed it yet. if it's an opclass two
# instruction (data moved in) and the exception was in supervisor
# mode, then also also wasn't updated. if it was user mode, then
# restore the correct a7 which is in the USP currently.
ri_a7:
        cmpi.b          EXC_VOFF(%a6),&0x30     # move in or out?
        bne.b           ri_a7_done              # out

        btst            &0x5,EXC_SR(%a6)        # user or supervisor?
        bne.b           ri_a7_done              # supervisor
        movc            %usp,%a0                # restore USP
        sub.l           %d0,%a0
        movc            %a0,%usp
ri_a7_done:
        rts

# need to invert adjustment value if the <ea> was predec
rest_dec:
        neg.l           %d0
        bra.b           rest_inc