]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - arch/m68knommu/platform/coldfire/timers.c
[XFS] Added quota targets and removed dmapi directory
[mirror_ubuntu-jammy-kernel.git] / arch / m68knommu / platform / coldfire / timers.c
1 /***************************************************************************/
2
3 /*
4 * timers.c -- generic ColdFire hardware timer support.
5 *
6 * Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
7 */
8
9 /***************************************************************************/
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/sched.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/profile.h>
17 #include <linux/clocksource.h>
18 #include <asm/io.h>
19 #include <asm/traps.h>
20 #include <asm/machdep.h>
21 #include <asm/coldfire.h>
22 #include <asm/mcftimer.h>
23 #include <asm/mcfsim.h>
24
25 /***************************************************************************/
26
27 /*
28 * By default use timer1 as the system clock timer.
29 */
30 #define FREQ (MCF_BUSCLK / 16)
31 #define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a))
32
33 /*
34 * Default the timer and vector to use for ColdFire. Some ColdFire
35 * CPU's and some boards may want different. Their sub-architecture
36 * startup code (in config.c) can change these if they want.
37 */
38 unsigned int mcf_timervector = 29;
39 unsigned int mcf_profilevector = 31;
40 unsigned int mcf_timerlevel = 5;
41
42 /*
43 * These provide the underlying interrupt vector support.
44 * Unfortunately it is a little different on each ColdFire.
45 */
46 extern void mcf_settimericr(int timer, int level);
47 void coldfire_profile_init(void);
48
49 #if defined(CONFIG_M532x)
50 #define __raw_readtrr __raw_readl
51 #define __raw_writetrr __raw_writel
52 #else
53 #define __raw_readtrr __raw_readw
54 #define __raw_writetrr __raw_writew
55 #endif
56
57 static u32 mcftmr_cycles_per_jiffy;
58 static u32 mcftmr_cnt;
59
60 /***************************************************************************/
61
62 static irqreturn_t mcftmr_tick(int irq, void *dummy)
63 {
64 /* Reset the ColdFire timer */
65 __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
66
67 mcftmr_cnt += mcftmr_cycles_per_jiffy;
68 return arch_timer_interrupt(irq, dummy);
69 }
70
71 /***************************************************************************/
72
73 static struct irqaction mcftmr_timer_irq = {
74 .name = "timer",
75 .flags = IRQF_DISABLED | IRQF_TIMER,
76 .handler = mcftmr_tick,
77 };
78
79 /***************************************************************************/
80
81 static cycle_t mcftmr_read_clk(void)
82 {
83 unsigned long flags;
84 u32 cycles;
85 u16 tcn;
86
87 local_irq_save(flags);
88 tcn = __raw_readw(TA(MCFTIMER_TCN));
89 cycles = mcftmr_cnt;
90 local_irq_restore(flags);
91
92 return cycles + tcn;
93 }
94
95 /***************************************************************************/
96
97 static struct clocksource mcftmr_clk = {
98 .name = "tmr",
99 .rating = 250,
100 .read = mcftmr_read_clk,
101 .shift = 20,
102 .mask = CLOCKSOURCE_MASK(32),
103 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
104 };
105
106 /***************************************************************************/
107
108 void hw_timer_init(void)
109 {
110 setup_irq(mcf_timervector, &mcftmr_timer_irq);
111
112 __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
113 mcftmr_cycles_per_jiffy = FREQ / HZ;
114 __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
115 __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
116 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
117
118 mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
119 clocksource_register(&mcftmr_clk);
120
121 mcf_settimericr(1, mcf_timerlevel);
122
123 #ifdef CONFIG_HIGHPROFILE
124 coldfire_profile_init();
125 #endif
126 }
127
128 /***************************************************************************/
129 #ifdef CONFIG_HIGHPROFILE
130 /***************************************************************************/
131
132 /*
133 * By default use timer2 as the profiler clock timer.
134 */
135 #define PA(a) (MCF_MBAR + MCFTIMER_BASE2 + (a))
136
137 /*
138 * Choose a reasonably fast profile timer. Make it an odd value to
139 * try and get good coverage of kernel operations.
140 */
141 #define PROFILEHZ 1013
142
143 /*
144 * Use the other timer to provide high accuracy profiling info.
145 */
146 irqreturn_t coldfire_profile_tick(int irq, void *dummy)
147 {
148 /* Reset ColdFire timer2 */
149 __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
150 if (current->pid)
151 profile_tick(CPU_PROFILING, regs);
152 return IRQ_HANDLED;
153 }
154
155 /***************************************************************************/
156
157 void coldfire_profile_init(void)
158 {
159 printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
160
161 /* Set up TIMER 2 as high speed profile clock */
162 __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
163
164 __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
165 __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
166 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
167
168 request_irq(mcf_profilevector, coldfire_profile_tick,
169 (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
170 mcf_settimericr(2, 7);
171 }
172
173 /***************************************************************************/
174 #endif /* CONFIG_HIGHPROFILE */
175 /***************************************************************************/