arch/mips/alchemy/devboards/db1200/platform.c

   1 /*
   2  * DBAu1200 board platform device registration
   3  *
   4  * Copyright (C) 2008-2009 Manuel Lauss
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  19  */
  20
  21 #include <linux/dma-mapping.h>
  22 #include <linux/gpio.h>
  23 #include <linux/i2c.h>
  24 #include <linux/init.h>
  25 #include <linux/io.h>
  26 #include <linux/leds.h>
  27 #include <linux/mmc/host.h>
  28 #include <linux/mtd/mtd.h>
  29 #include <linux/mtd/nand.h>
  30 #include <linux/mtd/partitions.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/serial_8250.h>
  33 #include <linux/spi/spi.h>
  34 #include <linux/spi/flash.h>
  35 #include <linux/smc91x.h>
  36
  37 #include <asm/mach-au1x00/au1100_mmc.h>
  38 #include <asm/mach-au1x00/au1xxx_dbdma.h>
  39 #include <asm/mach-au1x00/au1550_spi.h>
  40 #include <asm/mach-db1x00/bcsr.h>
  41 #include <asm/mach-db1x00/db1200.h>
  42
  43 #include "../platform.h"
  44
  45 static struct mtd_partition db1200_spiflash_parts[] = {
  46         {
  47                 .name   = "DB1200 SPI flash",
  48                 .offset = 0,
  49                 .size   = MTDPART_SIZ_FULL,
  50         },
  51 };
  52
  53 static struct flash_platform_data db1200_spiflash_data = {
  54         .name           = "s25fl001",
  55         .parts          = db1200_spiflash_parts,
  56         .nr_parts       = ARRAY_SIZE(db1200_spiflash_parts),
  57         .type           = "m25p10",
  58 };
  59
  60 static struct spi_board_info db1200_spi_devs[] __initdata = {
  61         {
  62                 /* TI TMP121AIDBVR temp sensor */
  63                 .modalias       = "tmp121",
  64                 .max_speed_hz   = 2000000,
  65                 .bus_num        = 0,
  66                 .chip_select    = 0,
  67                 .mode           = 0,
  68         },
  69         {
  70                 /* Spansion S25FL001D0FMA SPI flash */
  71                 .modalias       = "m25p80",
  72                 .max_speed_hz   = 50000000,
  73                 .bus_num        = 0,
  74                 .chip_select    = 1,
  75                 .mode           = 0,
  76                 .platform_data  = &db1200_spiflash_data,
  77         },
  78 };
  79
  80 static struct i2c_board_info db1200_i2c_devs[] __initdata = {
  81         {
  82                 /* AT24C04-10 I2C eeprom */
  83                 I2C_BOARD_INFO("24c04", 0x52),
  84         },
  85         {
  86                 /* Philips NE1619 temp/voltage sensor (adm1025 drv) */
  87                 I2C_BOARD_INFO("ne1619", 0x2d),
  88         },
  89         {
  90                 /* I2S audio codec WM8731 */
  91                 I2C_BOARD_INFO("wm8731", 0x1b),
  92         },
  93 };
  94
  95 /**********************************************************************/
  96
  97 static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
  98                                  unsigned int ctrl)
  99 {
 100         struct nand_chip *this = mtd->priv;
 101         unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 102
 103         ioaddr &= 0xffffff00;
 104
 105         if (ctrl & NAND_CLE) {
 106                 ioaddr += MEM_STNAND_CMD;
 107         } else if (ctrl & NAND_ALE) {
 108                 ioaddr += MEM_STNAND_ADDR;
 109         } else {
 110                 /* assume we want to r/w real data  by default */
 111                 ioaddr += MEM_STNAND_DATA;
 112         }
 113         this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
 114         if (cmd != NAND_CMD_NONE) {
 115                 __raw_writeb(cmd, this->IO_ADDR_W);
 116                 wmb();
 117         }
 118 }
 119
 120 static int au1200_nand_device_ready(struct mtd_info *mtd)
 121 {
 122         return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 123 }
 124
 125 static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
 126
 127 static struct mtd_partition db1200_nand_parts[] = {
 128         {
 129                 .name   = "NAND FS 0",
 130                 .offset = 0,
 131                 .size   = 8 * 1024 * 1024,
 132         },
 133         {
 134                 .name   = "NAND FS 1",
 135                 .offset = MTDPART_OFS_APPEND,
 136                 .size   = MTDPART_SIZ_FULL
 137         },
 138 };
 139
 140 struct platform_nand_data db1200_nand_platdata = {
 141         .chip = {
 142                 .nr_chips       = 1,
 143                 .chip_offset    = 0,
 144                 .nr_partitions  = ARRAY_SIZE(db1200_nand_parts),
 145                 .partitions     = db1200_nand_parts,
 146                 .chip_delay     = 20,
 147                 .part_probe_types = db1200_part_probes,
 148         },
 149         .ctrl = {
 150                 .dev_ready      = au1200_nand_device_ready,
 151                 .cmd_ctrl       = au1200_nand_cmd_ctrl,
 152         },
 153 };
 154
 155 static struct resource db1200_nand_res[] = {
 156         [0] = {
 157                 .start  = DB1200_NAND_PHYS_ADDR,
 158                 .end    = DB1200_NAND_PHYS_ADDR + 0xff,
 159                 .flags  = IORESOURCE_MEM,
 160         },
 161 };
 162
 163 static struct platform_device db1200_nand_dev = {
 164         .name           = "gen_nand",
 165         .num_resources  = ARRAY_SIZE(db1200_nand_res),
 166         .resource       = db1200_nand_res,
 167         .id             = -1,
 168         .dev            = {
 169                 .platform_data = &db1200_nand_platdata,
 170         }
 171 };
 172
 173 /**********************************************************************/
 174
 175 static struct smc91x_platdata db1200_eth_data = {
 176         .flags  = SMC91X_NOWAIT | SMC91X_USE_16BIT,
 177         .leda   = RPC_LED_100_10,
 178         .ledb   = RPC_LED_TX_RX,
 179 };
 180
 181 static struct resource db1200_eth_res[] = {
 182         [0] = {
 183                 .start  = DB1200_ETH_PHYS_ADDR,
 184                 .end    = DB1200_ETH_PHYS_ADDR + 0xf,
 185                 .flags  = IORESOURCE_MEM,
 186         },
 187         [1] = {
 188                 .start  = DB1200_ETH_INT,
 189                 .end    = DB1200_ETH_INT,
 190                 .flags  = IORESOURCE_IRQ,
 191         },
 192 };
 193
 194 static struct platform_device db1200_eth_dev = {
 195         .dev    = {
 196                 .platform_data  = &db1200_eth_data,
 197         },
 198         .name           = "smc91x",
 199         .id             = -1,
 200         .num_resources  = ARRAY_SIZE(db1200_eth_res),
 201         .resource       = db1200_eth_res,
 202 };
 203
 204 /**********************************************************************/
 205
 206 static struct resource db1200_ide_res[] = {
 207         [0] = {
 208                 .start  = DB1200_IDE_PHYS_ADDR,
 209                 .end    = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
 210                 .flags  = IORESOURCE_MEM,
 211         },
 212         [1] = {
 213                 .start  = DB1200_IDE_INT,
 214                 .end    = DB1200_IDE_INT,
 215                 .flags  = IORESOURCE_IRQ,
 216         }
 217 };
 218
 219 static u64 ide_dmamask = DMA_BIT_MASK(32);
 220
 221 static struct platform_device db1200_ide_dev = {
 222         .name           = "au1200-ide",
 223         .id             = 0,
 224         .dev = {
 225                 .dma_mask               = &ide_dmamask,
 226                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 227         },
 228         .num_resources  = ARRAY_SIZE(db1200_ide_res),
 229         .resource       = db1200_ide_res,
 230 };
 231
 232 /**********************************************************************/
 233
 234 static struct platform_device db1200_rtc_dev = {
 235         .name   = "rtc-au1xxx",
 236         .id     = -1,
 237 };
 238
 239 /**********************************************************************/
 240
 241 /* SD carddetects:  they're supposed to be edge-triggered, but ack
 242  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
 243  * is disabled and its counterpart enabled.  The 500ms timeout is
 244  * because the carddetect isn't debounced in hardware.
 245  */
 246 static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
 247 {
 248         void(*mmc_cd)(struct mmc_host *, unsigned long);
 249
 250         if (irq == DB1200_SD0_INSERT_INT) {
 251                 disable_irq_nosync(DB1200_SD0_INSERT_INT);
 252                 enable_irq(DB1200_SD0_EJECT_INT);
 253         } else {
 254                 disable_irq_nosync(DB1200_SD0_EJECT_INT);
 255                 enable_irq(DB1200_SD0_INSERT_INT);
 256         }
 257
 258         /* link against CONFIG_MMC=m */
 259         mmc_cd = symbol_get(mmc_detect_change);
 260         if (mmc_cd) {
 261                 mmc_cd(ptr, msecs_to_jiffies(500));
 262                 symbol_put(mmc_detect_change);
 263         }
 264
 265         return IRQ_HANDLED;
 266 }
 267
 268 static int db1200_mmc_cd_setup(void *mmc_host, int en)
 269 {
 270         int ret;
 271
 272         if (en) {
 273                 ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
 274                                   IRQF_DISABLED, "sd_insert", mmc_host);
 275                 if (ret)
 276                         goto out;
 277
 278                 ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
 279                                   IRQF_DISABLED, "sd_eject", mmc_host);
 280                 if (ret) {
 281                         free_irq(DB1200_SD0_INSERT_INT, mmc_host);
 282                         goto out;
 283                 }
 284
 285                 if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
 286                         enable_irq(DB1200_SD0_EJECT_INT);
 287                 else
 288                         enable_irq(DB1200_SD0_INSERT_INT);
 289
 290         } else {
 291                 free_irq(DB1200_SD0_INSERT_INT, mmc_host);
 292                 free_irq(DB1200_SD0_EJECT_INT, mmc_host);
 293         }
 294         ret = 0;
 295 out:
 296         return ret;
 297 }
 298
 299 static void db1200_mmc_set_power(void *mmc_host, int state)
 300 {
 301         if (state) {
 302                 bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 303                 msleep(400);    /* stabilization time */
 304         } else
 305                 bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 306 }
 307
 308 static int db1200_mmc_card_readonly(void *mmc_host)
 309 {
 310         return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
 311 }
 312
 313 static int db1200_mmc_card_inserted(void *mmc_host)
 314 {
 315         return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
 316 }
 317
 318 static void db1200_mmcled_set(struct led_classdev *led,
 319                               enum led_brightness brightness)
 320 {
 321         if (brightness != LED_OFF)
 322                 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 323         else
 324                 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 325 }
 326
 327 static struct led_classdev db1200_mmc_led = {
 328         .brightness_set = db1200_mmcled_set,
 329 };
 330
 331 /* needed by arch/mips/alchemy/common/platform.c */
 332 struct au1xmmc_platform_data au1xmmc_platdata[] = {
 333         [0] = {
 334                 .cd_setup       = db1200_mmc_cd_setup,
 335                 .set_power      = db1200_mmc_set_power,
 336                 .card_inserted  = db1200_mmc_card_inserted,
 337                 .card_readonly  = db1200_mmc_card_readonly,
 338                 .led            = &db1200_mmc_led,
 339         },
 340 };
 341
 342 /**********************************************************************/
 343
 344 static struct resource au1200_psc0_res[] = {
 345         [0] = {
 346                 .start  = PSC0_PHYS_ADDR,
 347                 .end    = PSC0_PHYS_ADDR + 0x000fffff,
 348                 .flags  = IORESOURCE_MEM,
 349         },
 350         [1] = {
 351                 .start  = AU1200_PSC0_INT,
 352                 .end    = AU1200_PSC0_INT,
 353                 .flags  = IORESOURCE_IRQ,
 354         },
 355         [2] = {
 356                 .start  = DSCR_CMD0_PSC0_TX,
 357                 .end    = DSCR_CMD0_PSC0_TX,
 358                 .flags  = IORESOURCE_DMA,
 359         },
 360         [3] = {
 361                 .start  = DSCR_CMD0_PSC0_RX,
 362                 .end    = DSCR_CMD0_PSC0_RX,
 363                 .flags  = IORESOURCE_DMA,
 364         },
 365 };
 366
 367 static struct platform_device db1200_i2c_dev = {
 368         .name           = "au1xpsc_smbus",
 369         .id             = 0,    /* bus number */
 370         .num_resources  = ARRAY_SIZE(au1200_psc0_res),
 371         .resource       = au1200_psc0_res,
 372 };
 373
 374 static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
 375 {
 376         if (cs)
 377                 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
 378         else
 379                 bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
 380 }
 381
 382 static struct au1550_spi_info db1200_spi_platdata = {
 383         .mainclk_hz     = 50000000,     /* PSC0 clock */
 384         .num_chipselect = 2,
 385         .activate_cs    = db1200_spi_cs_en,
 386 };
 387
 388 static u64 spi_dmamask = DMA_BIT_MASK(32);
 389
 390 static struct platform_device db1200_spi_dev = {
 391         .dev    = {
 392                 .dma_mask               = &spi_dmamask,
 393                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 394                 .platform_data          = &db1200_spi_platdata,
 395         },
 396         .name           = "au1550-spi",
 397         .id             = 0,    /* bus number */
 398         .num_resources  = ARRAY_SIZE(au1200_psc0_res),
 399         .resource       = au1200_psc0_res,
 400 };
 401
 402 static struct resource au1200_psc1_res[] = {
 403         [0] = {
 404                 .start  = PSC1_PHYS_ADDR,
 405                 .end    = PSC1_PHYS_ADDR + 0x000fffff,
 406                 .flags  = IORESOURCE_MEM,
 407         },
 408         [1] = {
 409                 .start  = AU1200_PSC1_INT,
 410                 .end    = AU1200_PSC1_INT,
 411                 .flags  = IORESOURCE_IRQ,
 412         },
 413         [2] = {
 414                 .start  = DSCR_CMD0_PSC1_TX,
 415                 .end    = DSCR_CMD0_PSC1_TX,
 416                 .flags  = IORESOURCE_DMA,
 417         },
 418         [3] = {
 419                 .start  = DSCR_CMD0_PSC1_RX,
 420                 .end    = DSCR_CMD0_PSC1_RX,
 421                 .flags  = IORESOURCE_DMA,
 422         },
 423 };
 424
 425 /* AC97 or I2S device */
 426 static struct platform_device db1200_audio_dev = {
 427         /* name assigned later based on switch setting */
 428         .id             = 1,    /* PSC ID */
 429         .num_resources  = ARRAY_SIZE(au1200_psc1_res),
 430         .resource       = au1200_psc1_res,
 431 };
 432
 433 /* DB1200 ASoC card device */
 434 static struct platform_device db1200_sound_dev = {
 435         /* name assigned later based on switch setting */
 436         .id             = 1,    /* PSC ID */
 437 };
 438
 439 static struct platform_device db1200_stac_dev = {
 440         .name           = "ac97-codec",
 441         .id             = 1,    /* on PSC1 */
 442 };
 443
 444 static struct platform_device db1200_audiodma_dev = {
 445         .name           = "au1xpsc-pcm",
 446         .id             = 1,    /* PSC ID */
 447 };
 448
 449 static struct platform_device *db1200_devs[] __initdata = {
 450         NULL,           /* PSC0, selected by S6.8 */
 451         &db1200_ide_dev,
 452         &db1200_eth_dev,
 453         &db1200_rtc_dev,
 454         &db1200_nand_dev,
 455         &db1200_audiodma_dev,
 456         &db1200_audio_dev,
 457         &db1200_stac_dev,
 458         &db1200_sound_dev,
 459 };
 460
 461 static int __init db1200_dev_init(void)
 462 {
 463         unsigned long pfc;
 464         unsigned short sw;
 465         int swapped;
 466
 467         i2c_register_board_info(0, db1200_i2c_devs,
 468                                 ARRAY_SIZE(db1200_i2c_devs));
 469         spi_register_board_info(db1200_spi_devs,
 470                                 ARRAY_SIZE(db1200_i2c_devs));
 471
 472         /* SWITCHES:    S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
 473          *              S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 474          */
 475
 476         /* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
 477          * this pin is claimed by PSC0 (unused though, but pinmux doesn't
 478          * allow to free it without crippling the SPI interface).
 479          * As a result, in SPI mode, OTG simply won't work (PSC0 uses
 480          * it as an input pin which is pulled high on the boards).
 481          */
 482         pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
 483
 484         /* switch off OTG VBUS supply */
 485         gpio_request(215, "otg-vbus");
 486         gpio_direction_output(215, 1);
 487
 488         printk(KERN_INFO "DB1200 device configuration:\n");
 489
 490         sw = bcsr_read(BCSR_SWITCHES);
 491         if (sw & BCSR_SWITCHES_DIP_8) {
 492                 db1200_devs[0] = &db1200_i2c_dev;
 493                 bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 494
 495                 pfc |= (2 << 17);       /* GPIO2 block owns GPIO215 */
 496
 497                 printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
 498                 printk(KERN_INFO "   OTG port VBUS supply available!\n");
 499         } else {
 500                 db1200_devs[0] = &db1200_spi_dev;
 501                 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
 502
 503                 pfc |= (1 << 17);       /* PSC0 owns GPIO215 */
 504
 505                 printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
 506                 printk(KERN_INFO "   OTG port VBUS supply disabled\n");
 507         }
 508         __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 509         wmb();
 510
 511         /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
 512          * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
 513          */
 514         sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
 515         if (sw == BCSR_SWITCHES_DIP_8) {
 516                 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
 517                 db1200_audio_dev.name = "au1xpsc_i2s";
 518                 db1200_sound_dev.name = "db1200-i2s";
 519                 printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
 520         } else {
 521                 bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
 522                 db1200_audio_dev.name = "au1xpsc_ac97";
 523                 db1200_sound_dev.name = "db1200-ac97";
 524                 printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
 525         }
 526
 527         /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 528         __raw_writel(PSC_SEL_CLK_SERCLK,
 529                 (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 530         wmb();
 531
 532         db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
 533                                     PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 534                                     PCMCIA_MEM_PHYS_ADDR,
 535                                     PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 536                                     PCMCIA_IO_PHYS_ADDR,
 537                                     PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
 538                                     DB1200_PC0_INT,
 539                                     DB1200_PC0_INSERT_INT,
 540                                     /*DB1200_PC0_STSCHG_INT*/0,
 541                                     DB1200_PC0_EJECT_INT,
 542                                     0);
 543
 544         db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
 545                                     PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
 546                                     PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
 547                                     PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 548                                     PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 549                                     PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
 550                                     DB1200_PC1_INT,
 551                                     DB1200_PC1_INSERT_INT,
 552                                     /*DB1200_PC1_STSCHG_INT*/0,
 553                                     DB1200_PC1_EJECT_INT,
 554                                     1);
 555
 556         swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 557         db1x_register_norflash(64 << 20, 2, swapped);
 558
 559         return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
 560 }
 561 device_initcall(db1200_dev_init);
 562
 563 /* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
 564 int board_au1200fb_panel(void)
 565 {
 566         return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
 567 }
 568
 569 int board_au1200fb_panel_init(void)
 570 {
 571         /* Apply power */
 572         bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
 573                                 BCSR_BOARD_LCDBL);
 574         return 0;
 575 }
 576
 577 int board_au1200fb_panel_shutdown(void)
 578 {
 579         /* Remove power */
 580         bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
 581                              BCSR_BOARD_LCDBL, 0);
 582         return 0;
 583 }