]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - arch/mips/alchemy/devboards/db1300.c
projects / mirror_ubuntu-jammy-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
MIPS: Alchemy: Basic support for the DB1300 board.
[mirror_ubuntu-jammy-kernel.git] / arch / mips / alchemy / devboards / db1300.c
1 /*
2 * DBAu1300 init and platform device setup.
3 *
4 * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
5 */
6
7 #include <linux/dma-mapping.h>
8 #include <linux/gpio.h>
9 #include <linux/gpio_keys.h>
10 #include <linux/init.h>
11 #include <linux/input.h> /* KEY_* codes */
12 #include <linux/i2c.h>
13 #include <linux/io.h>
14 #include <linux/leds.h>
15 #include <linux/ata_platform.h>
16 #include <linux/mmc/host.h>
17 #include <linux/module.h>
18 #include <linux/mtd/mtd.h>
19 #include <linux/mtd/nand.h>
20 #include <linux/mtd/partitions.h>
21 #include <linux/platform_device.h>
22 #include <linux/smsc911x.h>
23
24 #include <asm/mach-au1x00/au1000.h>
25 #include <asm/mach-au1x00/au1100_mmc.h>
26 #include <asm/mach-au1x00/au1xxx_dbdma.h>
27 #include <asm/mach-au1x00/au1xxx_psc.h>
28 #include <asm/mach-db1x00/db1300.h>
29 #include <asm/mach-db1x00/bcsr.h>
30 #include <asm/mach-au1x00/prom.h>
31
32 #include "platform.h"
33
34 static struct i2c_board_info db1300_i2c_devs[] __initdata = {
35 { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */
36 { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
37 };
38
39 /* multifunction pins to assign to GPIO controller */
40 static int db1300_gpio_pins[] __initdata = {
41 AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
42 AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
43 AU1300_PIN_EXTCLK1,
44 -1, /* terminator */
45 };
46
47 /* multifunction pins to assign to device functions */
48 static int db1300_dev_pins[] __initdata = {
49 /* wake-from-str pins 0-3 */
50 AU1300_PIN_WAKE0,
51 /* external clock sources for PSC0 */
52 AU1300_PIN_EXTCLK0,
53 /* 8bit MMC interface on SD0: 6-9 */
54 AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
55 AU1300_PIN_SD0DAT7,
56 /* UART1 pins: 11-18 */
57 AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
58 AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
59 AU1300_PIN_U1RX, AU1300_PIN_U1TX,
60 /* UART0 pins: 19-24 */
61 AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
62 AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
63 /* UART2: 25-26 */
64 AU1300_PIN_U2RX, AU1300_PIN_U2TX,
65 /* UART3: 27-28 */
66 AU1300_PIN_U3RX, AU1300_PIN_U3TX,
67 /* LCD controller PWMs, ext pixclock: 30-31 */
68 AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
69 /* SD1 interface: 32-37 */
70 AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
71 AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
72 /* SD2 interface: 38-43 */
73 AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
74 AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
75 /* PSC0/1 clocks: 44-45 */
76 AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
77 /* PSCs: 46-49/50-53/54-57/58-61 */
78 AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
79 AU1300_PIN_PSC0D1,
80 AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
81 AU1300_PIN_PSC1D1,
82 AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0,
83 AU1300_PIN_PSC2D1,
84 AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
85 AU1300_PIN_PSC3D1,
86 /* PCMCIA interface: 62-70 */
87 AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
88 AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
89 AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
90 /* camera interface H/V sync inputs: 71-72 */
91 AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
92 /* PSC2/3 clocks: 73-74 */
93 AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
94 -1, /* terminator */
95 };
96
97 static void __init db1300_gpio_config(void)
98 {
99 int *i;
100
101 i = &db1300_dev_pins[0];
102 while (*i != -1)
103 au1300_pinfunc_to_dev(*i++);
104
105 i = &db1300_gpio_pins[0];
106 while (*i != -1)
107 au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
108
109 au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
110 }
111
112 char *get_system_type(void)
113 {
114 return "DB1300";
115 }
116
117 /**********************************************************************/
118
119 static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
120 unsigned int ctrl)
121 {
122 struct nand_chip *this = mtd->priv;
123 unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
124
125 ioaddr &= 0xffffff00;
126
127 if (ctrl & NAND_CLE) {
128 ioaddr += MEM_STNAND_CMD;
129 } else if (ctrl & NAND_ALE) {
130 ioaddr += MEM_STNAND_ADDR;
131 } else {
132 /* assume we want to r/w real data by default */
133 ioaddr += MEM_STNAND_DATA;
134 }
135 this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
136 if (cmd != NAND_CMD_NONE) {
137 __raw_writeb(cmd, this->IO_ADDR_W);
138 wmb();
139 }
140 }
141
142 static int au1300_nand_device_ready(struct mtd_info *mtd)
143 {
144 return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
145 }
146
147 static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
148
149 static struct mtd_partition db1300_nand_parts[] = {
150 {
151 .name = "NAND FS 0",
152 .offset = 0,
153 .size = 8 * 1024 * 1024,
154 },
155 {
156 .name = "NAND FS 1",
157 .offset = MTDPART_OFS_APPEND,
158 .size = MTDPART_SIZ_FULL
159 },
160 };
161
162 struct platform_nand_data db1300_nand_platdata = {
163 .chip = {
164 .nr_chips = 1,
165 .chip_offset = 0,
166 .nr_partitions = ARRAY_SIZE(db1300_nand_parts),
167 .partitions = db1300_nand_parts,
168 .chip_delay = 20,
169 .part_probe_types = db1300_part_probes,
170 },
171 .ctrl = {
172 .dev_ready = au1300_nand_device_ready,
173 .cmd_ctrl = au1300_nand_cmd_ctrl,
174 },
175 };
176
177 static struct resource db1300_nand_res[] = {
178 [0] = {
179 .start = DB1300_NAND_PHYS_ADDR,
180 .end = DB1300_NAND_PHYS_ADDR + 0xff,
181 .flags = IORESOURCE_MEM,
182 },
183 };
184
185 static struct platform_device db1300_nand_dev = {
186 .name = "gen_nand",
187 .num_resources = ARRAY_SIZE(db1300_nand_res),
188 .resource = db1300_nand_res,
189 .id = -1,
190 .dev = {
191 .platform_data = &db1300_nand_platdata,
192 }
193 };
194
195 /**********************************************************************/
196
197 static struct resource db1300_eth_res[] = {
198 [0] = {
199 .start = DB1300_ETH_PHYS_ADDR,
200 .end = DB1300_ETH_PHYS_END,
201 .flags = IORESOURCE_MEM,
202 },
203 [1] = {
204 .start = DB1300_ETH_INT,
205 .end = DB1300_ETH_INT,
206 .flags = IORESOURCE_IRQ,
207 },
208 };
209
210 static struct smsc911x_platform_config db1300_eth_config = {
211 .phy_interface = PHY_INTERFACE_MODE_MII,
212 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
213 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
214 .flags = SMSC911X_USE_32BIT,
215 };
216
217 static struct platform_device db1300_eth_dev = {
218 .name = "smsc911x",
219 .id = -1,
220 .num_resources = ARRAY_SIZE(db1300_eth_res),
221 .resource = db1300_eth_res,
222 .dev = {
223 .platform_data = &db1300_eth_config,
224 },
225 };
226
227 /**********************************************************************/
228
229 static struct resource au1300_psc1_res[] = {
230 [0] = {
231 .start = AU1300_PSC1_PHYS_ADDR,
232 .end = AU1300_PSC1_PHYS_ADDR + 0x0fff,
233 .flags = IORESOURCE_MEM,
234 },
235 [1] = {
236 .start = AU1300_PSC1_INT,
237 .end = AU1300_PSC1_INT,
238 .flags = IORESOURCE_IRQ,
239 },
240 [2] = {
241 .start = AU1300_DSCR_CMD0_PSC1_TX,
242 .end = AU1300_DSCR_CMD0_PSC1_TX,
243 .flags = IORESOURCE_DMA,
244 },
245 [3] = {
246 .start = AU1300_DSCR_CMD0_PSC1_RX,
247 .end = AU1300_DSCR_CMD0_PSC1_RX,
248 .flags = IORESOURCE_DMA,
249 },
250 };
251
252 static struct platform_device db1300_ac97_dev = {
253 .name = "au1xpsc_ac97",
254 .id = 1, /* PSC ID. match with AC97 codec ID! */
255 .num_resources = ARRAY_SIZE(au1300_psc1_res),
256 .resource = au1300_psc1_res,
257 };
258
259 /**********************************************************************/
260
261 static struct resource au1300_psc2_res[] = {
262 [0] = {
263 .start = AU1300_PSC2_PHYS_ADDR,
264 .end = AU1300_PSC2_PHYS_ADDR + 0x0fff,
265 .flags = IORESOURCE_MEM,
266 },
267 [1] = {
268 .start = AU1300_PSC2_INT,
269 .end = AU1300_PSC2_INT,
270 .flags = IORESOURCE_IRQ,
271 },
272 [2] = {
273 .start = AU1300_DSCR_CMD0_PSC2_TX,
274 .end = AU1300_DSCR_CMD0_PSC2_TX,
275 .flags = IORESOURCE_DMA,
276 },
277 [3] = {
278 .start = AU1300_DSCR_CMD0_PSC2_RX,
279 .end = AU1300_DSCR_CMD0_PSC2_RX,
280 .flags = IORESOURCE_DMA,
281 },
282 };
283
284 static struct platform_device db1300_i2s_dev = {
285 .name = "au1xpsc_i2s",
286 .id = 2, /* PSC ID */
287 .num_resources = ARRAY_SIZE(au1300_psc2_res),
288 .resource = au1300_psc2_res,
289 };
290
291 /**********************************************************************/
292
293 static struct resource au1300_psc3_res[] = {
294 [0] = {
295 .start = AU1300_PSC3_PHYS_ADDR,
296 .end = AU1300_PSC3_PHYS_ADDR + 0x0fff,
297 .flags = IORESOURCE_MEM,
298 },
299 [1] = {
300 .start = AU1300_PSC3_INT,
301 .end = AU1300_PSC3_INT,
302 .flags = IORESOURCE_IRQ,
303 },
304 [2] = {
305 .start = AU1300_DSCR_CMD0_PSC3_TX,
306 .end = AU1300_DSCR_CMD0_PSC3_TX,
307 .flags = IORESOURCE_DMA,
308 },
309 [3] = {
310 .start = AU1300_DSCR_CMD0_PSC3_RX,
311 .end = AU1300_DSCR_CMD0_PSC3_RX,
312 .flags = IORESOURCE_DMA,
313 },
314 };
315
316 static struct platform_device db1300_i2c_dev = {
317 .name = "au1xpsc_smbus",
318 .id = 0, /* bus number */
319 .num_resources = ARRAY_SIZE(au1300_psc3_res),
320 .resource = au1300_psc3_res,
321 };
322
323 /**********************************************************************/
324
325 /* proper key assignments when facing the LCD panel. For key assignments
326 * according to the schematics swap up with down and left with right.
327 * I chose to use it to emulate the arrow keys of a keyboard.
328 */
329 static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
330 {
331 .code = KEY_DOWN,
332 .gpio = AU1300_PIN_LCDPWM0,
333 .type = EV_KEY,
334 .debounce_interval = 1,
335 .active_low = 1,
336 .desc = "5waysw-down",
337 },
338 {
339 .code = KEY_UP,
340 .gpio = AU1300_PIN_PSC2SYNC1,
341 .type = EV_KEY,
342 .debounce_interval = 1,
343 .active_low = 1,
344 .desc = "5waysw-up",
345 },
346 {
347 .code = KEY_RIGHT,
348 .gpio = AU1300_PIN_WAKE3,
349 .type = EV_KEY,
350 .debounce_interval = 1,
351 .active_low = 1,
352 .desc = "5waysw-right",
353 },
354 {
355 .code = KEY_LEFT,
356 .gpio = AU1300_PIN_WAKE2,
357 .type = EV_KEY,
358 .debounce_interval = 1,
359 .active_low = 1,
360 .desc = "5waysw-left",
361 },
362 {
363 .code = KEY_ENTER,
364 .gpio = AU1300_PIN_WAKE1,
365 .type = EV_KEY,
366 .debounce_interval = 1,
367 .active_low = 1,
368 .desc = "5waysw-push",
369 },
370 };
371
372 static struct gpio_keys_platform_data db1300_5waysw_data = {
373 .buttons = db1300_5waysw_arrowkeys,
374 .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys),
375 .rep = 1,
376 .name = "db1300-5wayswitch",
377 };
378
379 static struct platform_device db1300_5waysw_dev = {
380 .name = "gpio-keys",
381 .dev = {
382 .platform_data = &db1300_5waysw_data,
383 },
384 };
385
386 /**********************************************************************/
387
388 static struct platform_device db1300_rtc_dev = {
389 .name = "rtc-au1xxx",
390 .id = -1,
391 };
392
393 /**********************************************************************/
394
395 static struct pata_platform_info db1300_ide_info = {
396 .ioport_shift = DB1300_IDE_REG_SHIFT,
397 };
398
399 #define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT)
400 static struct resource db1300_ide_res[] = {
401 [0] = {
402 .start = DB1300_IDE_PHYS_ADDR,
403 .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
404 .flags = IORESOURCE_MEM,
405 },
406 [1] = {
407 .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
408 .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
409 .flags = IORESOURCE_MEM,
410 },
411 [2] = {
412 .start = DB1300_IDE_INT,
413 .end = DB1300_IDE_INT,
414 .flags = IORESOURCE_IRQ,
415 },
416 };
417
418 static struct platform_device db1300_ide_dev = {
419 .dev = {
420 .platform_data = &db1300_ide_info,
421 },
422 .name = "pata_platform",
423 .resource = db1300_ide_res,
424 .num_resources = ARRAY_SIZE(db1300_ide_res),
425 };
426
427 /**********************************************************************/
428
429 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
430 {
431 void(*mmc_cd)(struct mmc_host *, unsigned long);
432
433 /* disable the one currently screaming. No other way to shut it up */
434 if (irq == DB1300_SD1_INSERT_INT) {
435 disable_irq_nosync(DB1300_SD1_INSERT_INT);
436 enable_irq(DB1300_SD1_EJECT_INT);
437 } else {
438 disable_irq_nosync(DB1300_SD1_EJECT_INT);
439 enable_irq(DB1300_SD1_INSERT_INT);
440 }
441
442 /* link against CONFIG_MMC=m. We can only be called once MMC core has
443 * initialized the controller, so symbol_get() should always succeed.
444 */
445 mmc_cd = symbol_get(mmc_detect_change);
446 mmc_cd(ptr, msecs_to_jiffies(500));
447 symbol_put(mmc_detect_change);
448
449 return IRQ_HANDLED;
450 }
451
452 static int db1300_mmc_card_readonly(void *mmc_host)
453 {
454 /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
455 return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
456 }
457
458 static int db1300_mmc_card_inserted(void *mmc_host)
459 {
460 return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
461 }
462
463 static int db1300_mmc_cd_setup(void *mmc_host, int en)
464 {
465 int ret;
466
467 if (en) {
468 ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
469 "sd_insert", mmc_host);
470 if (ret)
471 goto out;
472
473 ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
474 "sd_eject", mmc_host);
475 if (ret) {
476 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
477 goto out;
478 }
479
480 if (db1300_mmc_card_inserted(mmc_host))
481 enable_irq(DB1300_SD1_EJECT_INT);
482 else
483 enable_irq(DB1300_SD1_INSERT_INT);
484
485 } else {
486 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
487 free_irq(DB1300_SD1_EJECT_INT, mmc_host);
488 }
489 ret = 0;
490 out:
491 return ret;
492 }
493
494 static void db1300_mmcled_set(struct led_classdev *led,
495 enum led_brightness brightness)
496 {
497 if (brightness != LED_OFF)
498 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
499 else
500 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
501 }
502
503 static struct led_classdev db1300_mmc_led = {
504 .brightness_set = db1300_mmcled_set,
505 };
506
507 struct au1xmmc_platform_data db1300_sd1_platdata = {
508 .cd_setup = db1300_mmc_cd_setup,
509 .card_inserted = db1300_mmc_card_inserted,
510 .card_readonly = db1300_mmc_card_readonly,
511 .led = &db1300_mmc_led,
512 };
513
514 static struct resource au1300_sd1_res[] = {
515 [0] = {
516 .start = AU1300_SD1_PHYS_ADDR,
517 .end = AU1300_SD1_PHYS_ADDR,
518 .flags = IORESOURCE_MEM,
519 },
520 [1] = {
521 .start = AU1300_SD1_INT,
522 .end = AU1300_SD1_INT,
523 .flags = IORESOURCE_IRQ,
524 },
525 [2] = {
526 .start = AU1300_DSCR_CMD0_SDMS_TX1,
527 .end = AU1300_DSCR_CMD0_SDMS_TX1,
528 .flags = IORESOURCE_DMA,
529 },
530 [3] = {
531 .start = AU1300_DSCR_CMD0_SDMS_RX1,
532 .end = AU1300_DSCR_CMD0_SDMS_RX1,
533 .flags = IORESOURCE_DMA,
534 },
535 };
536
537 static struct platform_device db1300_sd1_dev = {
538 .dev = {
539 .platform_data = &db1300_sd1_platdata,
540 },
541 .name = "au1xxx-mmc",
542 .id = 1,
543 .resource = au1300_sd1_res,
544 .num_resources = ARRAY_SIZE(au1300_sd1_res),
545 };
546
547 /**********************************************************************/
548
549 static int db1300_movinand_inserted(void *mmc_host)
550 {
551 return 0; /* disable for now, it doesn't work yet */
552 }
553
554 static int db1300_movinand_readonly(void *mmc_host)
555 {
556 return 0;
557 }
558
559 static void db1300_movinand_led_set(struct led_classdev *led,
560 enum led_brightness brightness)
561 {
562 if (brightness != LED_OFF)
563 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
564 else
565 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
566 }
567
568 static struct led_classdev db1300_movinand_led = {
569 .brightness_set = db1300_movinand_led_set,
570 };
571
572 struct au1xmmc_platform_data db1300_sd0_platdata = {
573 .card_inserted = db1300_movinand_inserted,
574 .card_readonly = db1300_movinand_readonly,
575 .led = &db1300_movinand_led,
576 .mask_host_caps = MMC_CAP_NEEDS_POLL,
577 };
578
579 static struct resource au1300_sd0_res[] = {
580 [0] = {
581 .start = AU1100_SD0_PHYS_ADDR,
582 .end = AU1100_SD0_PHYS_ADDR,
583 .flags = IORESOURCE_MEM,
584 },
585 [1] = {
586 .start = AU1300_SD0_INT,
587 .end = AU1300_SD0_INT,
588 .flags = IORESOURCE_IRQ,
589 },
590 [2] = {
591 .start = AU1300_DSCR_CMD0_SDMS_TX0,
592 .end = AU1300_DSCR_CMD0_SDMS_TX0,
593 .flags = IORESOURCE_DMA,
594 },
595 [3] = {
596 .start = AU1300_DSCR_CMD0_SDMS_RX0,
597 .end = AU1300_DSCR_CMD0_SDMS_RX0,
598 .flags = IORESOURCE_DMA,
599 },
600 };
601
602 static struct platform_device db1300_sd0_dev = {
603 .dev = {
604 .platform_data = &db1300_sd0_platdata,
605 },
606 .name = "au1xxx-mmc",
607 .id = 0,
608 .resource = au1300_sd0_res,
609 .num_resources = ARRAY_SIZE(au1300_sd0_res),
610 };
611
612 /**********************************************************************/
613
614 static struct platform_device db1300_wm9715_dev = {
615 .name = "wm9712-codec",
616 .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */
617 };
618
619 static struct platform_device db1300_ac97dma_dev = {
620 .name = "au1xpsc-pcm",
621 .id = 1, /* PSC ID */
622 };
623
624 static struct platform_device db1300_i2sdma_dev = {
625 .name = "au1xpsc-pcm",
626 .id = 2, /* PSC ID */
627 };
628
629 static struct platform_device db1300_sndac97_dev = {
630 .name = "db1300-ac97",
631 };
632
633 static struct platform_device db1300_sndi2s_dev = {
634 .name = "db1300-i2s",
635 };
636
637 /**********************************************************************/
638
639 static struct resource au1300_lcd_res[] = {
640 [0] = {
641 .start = AU1200_LCD_PHYS_ADDR,
642 .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
643 .flags = IORESOURCE_MEM,
644 },
645 [1] = {
646 .start = AU1300_LCD_INT,
647 .end = AU1300_LCD_INT,
648 .flags = IORESOURCE_IRQ,
649 }
650 };
651
652 static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
653
654 static struct platform_device db1300_lcd_dev = {
655 .name = "au1200-lcd",
656 .id = 0,
657 .dev = {
658 .dma_mask = &au1300_lcd_dmamask,
659 .coherent_dma_mask = DMA_BIT_MASK(32),
660 },
661 .num_resources = ARRAY_SIZE(au1300_lcd_res),
662 .resource = au1300_lcd_res,
663 };
664
665 /**********************************************************************/
666
667 static struct platform_device *db1300_dev[] __initdata = {
668 &db1300_eth_dev,
669 &db1300_i2c_dev,
670 &db1300_5waysw_dev,
671 &db1300_rtc_dev,
672 &db1300_nand_dev,
673 &db1300_ide_dev,
674 &db1300_sd0_dev,
675 &db1300_sd1_dev,
676 &db1300_lcd_dev,
677 &db1300_ac97_dev,
678 &db1300_i2s_dev,
679 &db1300_wm9715_dev,
680 &db1300_ac97dma_dev,
681 &db1300_i2sdma_dev,
682 &db1300_sndac97_dev,
683 &db1300_sndi2s_dev,
684 };
685
686 static int __init db1300_device_init(void)
687 {
688 int swapped, cpldirq;
689
690 /* setup CPLD IRQ muxer */
691 cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
692 irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
693 bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
694
695 /* insert/eject IRQs: one always triggers so don't enable them
696 * when doing request_irq() on them. DB1200 has this bug too.
697 */
698 irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
699 irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
700 irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
701 irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
702
703 /*
704 * setup board
705 */
706 prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
707
708 i2c_register_board_info(0, db1300_i2c_devs,
709 ARRAY_SIZE(db1300_i2c_devs));
710
711 /* Audio PSC clock is supplied by codecs (PSC1, 2) */
712 __raw_writel(PSC_SEL_CLK_SERCLK,
713 (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
714 wmb();
715 __raw_writel(PSC_SEL_CLK_SERCLK,
716 (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
717 wmb();
718 /* I2C uses internal 48MHz EXTCLK1 */
719 __raw_writel(PSC_SEL_CLK_INTCLK,
720 (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
721 wmb();
722
723 /* enable power to USB ports */
724 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
725
726 /* although it is socket #0, it uses the CPLD bits which previous boards
727 * have used for socket #1.
728 */
729 db1x_register_pcmcia_socket(
730 AU1000_PCMCIA_ATTR_PHYS_ADDR,
731 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
732 AU1000_PCMCIA_MEM_PHYS_ADDR,
733 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1,
734 AU1000_PCMCIA_IO_PHYS_ADDR,
735 AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1,
736 DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
737
738 swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
739 db1x_register_norflash(64 << 20, 2, swapped);
740
741 return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
742 }
743 device_initcall(db1300_device_init);
744
745
746 void __init board_setup(void)
747 {
748 unsigned short whoami;
749
750 db1300_gpio_config();
751 bcsr_init(DB1300_BCSR_PHYS_ADDR,
752 DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
753
754 whoami = bcsr_read(BCSR_WHOAMI);
755 printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
756 "BoardID %d CPLD Rev %d DaughtercardID %d\n",
757 BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
758 BCSR_WHOAMI_DCID(whoami));
759
760 /* enable UARTs, YAMON only enables #2 */
761 alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
762 alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
763 alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
764 }
765
766
767 /* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
768 int board_au1200fb_panel(void)
769 {
770 return 9; /* DB1300_800x480 */
771 }
772
773 int board_au1200fb_panel_init(void)
774 {
775 /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
776 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
777 BCSR_BOARD_LCDBL);
778 return 0;
779 }
780
781 int board_au1200fb_panel_shutdown(void)
782 {
783 /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
784 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
785 BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
786 return 0;
787 }
Ubuntu Jammy Linux kernel mirror