arch/mips/boot/dts/brcm/bcm7420.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "brcm,bcm7420";
   5
   6         cpus {
   7                 #address-cells = <1>;
   8                 #size-cells = <0>;
   9
  10                 mips-hpt-frequency = <93750000>;
  11
  12                 cpu@0 {
  13                         compatible = "brcm,bmips5000";
  14                         device_type = "cpu";
  15                         reg = <0>;
  16                 };
  17
  18                 cpu@1 {
  19                         compatible = "brcm,bmips5000";
  20                         device_type = "cpu";
  21                         reg = <1>;
  22                 };
  23         };
  24
  25         aliases {
  26                 uart0 = &uart0;
  27         };
  28
  29         cpu_intc: interrupt-controller {
  30                 #address-cells = <0>;
  31                 compatible = "mti,cpu-interrupt-controller";
  32
  33                 interrupt-controller;
  34                 #interrupt-cells = <1>;
  35         };
  36
  37         clocks {
  38                 uart_clk: uart_clk {
  39                         compatible = "fixed-clock";
  40                         #clock-cells = <0>;
  41                         clock-frequency = <81000000>;
  42                 };
  43
  44                 upg_clk: upg_clk {
  45                         compatible = "fixed-clock";
  46                         #clock-cells = <0>;
  47                         clock-frequency = <27000000>;
  48                 };
  49         };
  50
  51         rdb {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54
  55                 compatible = "simple-bus";
  56                 ranges = <0 0x10000000 0x01000000>;
  57
  58                 periph_intc: interrupt-controller@441400 {
  59                         compatible = "brcm,bcm7038-l1-intc";
  60                         reg = <0x441400 0x30>, <0x441600 0x30>;
  61
  62                         interrupt-controller;
  63                         #interrupt-cells = <1>;
  64
  65                         interrupt-parent = <&cpu_intc>;
  66                         interrupts = <2>, <3>;
  67                 };
  68
  69                 sun_l2_intc: interrupt-controller@401800 {
  70                         compatible = "brcm,l2-intc";
  71                         reg = <0x401800 0x30>;
  72                         interrupt-controller;
  73                         #interrupt-cells = <1>;
  74                         interrupt-parent = <&periph_intc>;
  75                         interrupts = <23>;
  76                 };
  77
  78                 gisb-arb@400000 {
  79                         compatible = "brcm,bcm7400-gisb-arb";
  80                         reg = <0x400000 0xdc>;
  81                         native-endian;
  82                         interrupt-parent = <&sun_l2_intc>;
  83                         interrupts = <0>, <2>;
  84                         brcm,gisb-arb-master-mask = <0x3ff>;
  85                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
  86                                                      "pcie_0", "bsp_0", "rdc_0",
  87                                                      "rptd_0", "avd_0", "avd_1",
  88                                                      "jtag_0";
  89                 };
  90
  91                 upg_irq0_intc: interrupt-controller@406780 {
  92                         compatible = "brcm,bcm7120-l2-intc";
  93                         reg = <0x406780 0x8>;
  94
  95                         brcm,int-map-mask = <0x44>, <0x1f000000>;
  96                         brcm,int-fwd-mask = <0x70000>;
  97
  98                         interrupt-controller;
  99                         #interrupt-cells = <1>;
 100
 101                         interrupt-parent = <&periph_intc>;
 102                         interrupts = <18>, <19>;
 103                         interrupt-names = "upg_main", "upg_bsc";
 104                 };
 105
 106                 sun_top_ctrl: syscon@404000 {
 107                         compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
 108                         reg = <0x404000 0x60c>;
 109                         native-endian;
 110                 };
 111
 112                 reboot {
 113                         compatible = "brcm,bcm7038-reboot";
 114                         syscon = <&sun_top_ctrl 0x8 0x14>;
 115                 };
 116
 117                 uart0: serial@406b00 {
 118                         compatible = "ns16550a";
 119                         reg = <0x406b00 0x20>;
 120                         reg-io-width = <0x4>;
 121                         reg-shift = <0x2>;
 122                         interrupt-parent = <&periph_intc>;
 123                         interrupts = <21>;
 124                         clocks = <&uart_clk>;
 125                         status = "disabled";
 126                 };
 127
 128                 uart1: serial@406b40 {
 129                         compatible = "ns16550a";
 130                         reg = <0x406b40 0x20>;
 131                         reg-io-width = <0x4>;
 132                         reg-shift = <0x2>;
 133                         interrupt-parent = <&periph_intc>;
 134                         interrupts = <64>;
 135                         clocks = <&uart_clk>;
 136                         status = "disabled";
 137                 };
 138
 139                 uart2: serial@406b80 {
 140                         compatible = "ns16550a";
 141                         reg = <0x406b80 0x20>;
 142                         reg-io-width = <0x4>;
 143                         reg-shift = <0x2>;
 144                         interrupt-parent = <&periph_intc>;
 145                         interrupts = <65>;
 146                         clocks = <&uart_clk>;
 147                         status = "disabled";
 148                 };
 149
 150                 bsca: i2c@406200 {
 151                       clock-frequency = <390000>;
 152                       compatible = "brcm,brcmstb-i2c";
 153                       interrupt-parent = <&upg_irq0_intc>;
 154                       reg = <0x406200 0x58>;
 155                       interrupts = <24>;
 156                       interrupt-names = "upg_bsca";
 157                       status = "disabled";
 158                 };
 159
 160                 bscb: i2c@406280 {
 161                       clock-frequency = <390000>;
 162                       compatible = "brcm,brcmstb-i2c";
 163                       interrupt-parent = <&upg_irq0_intc>;
 164                       reg = <0x406280 0x58>;
 165                       interrupts = <25>;
 166                       interrupt-names = "upg_bscb";
 167                       status = "disabled";
 168                 };
 169
 170                 bscc: i2c@406300 {
 171                       clock-frequency = <390000>;
 172                       compatible = "brcm,brcmstb-i2c";
 173                       interrupt-parent = <&upg_irq0_intc>;
 174                       reg = <0x406300 0x58>;
 175                       interrupts = <26>;
 176                       interrupt-names = "upg_bscc";
 177                       status = "disabled";
 178                 };
 179
 180                 bscd: i2c@406380 {
 181                       clock-frequency = <390000>;
 182                       compatible = "brcm,brcmstb-i2c";
 183                       interrupt-parent = <&upg_irq0_intc>;
 184                       reg = <0x406380 0x58>;
 185                       interrupts = <27>;
 186                       interrupt-names = "upg_bscd";
 187                       status = "disabled";
 188                 };
 189
 190                 bsce: i2c@406800 {
 191                       clock-frequency = <390000>;
 192                       compatible = "brcm,brcmstb-i2c";
 193                       interrupt-parent = <&upg_irq0_intc>;
 194                       reg = <0x406800 0x58>;
 195                       interrupts = <28>;
 196                       interrupt-names = "upg_bsce";
 197                       status = "disabled";
 198                 };
 199
 200                 pwma: pwm@406580 {
 201                         compatible = "brcm,bcm7038-pwm";
 202                         reg = <0x406580 0x28>;
 203                         #pwm-cells = <2>;
 204                         clocks = <&upg_clk>;
 205                         status = "disabled";
 206                 };
 207
 208                 pwmb: pwm@406880 {
 209                         compatible = "brcm,bcm7038-pwm";
 210                         reg = <0x406880 0x28>;
 211                         #pwm-cells = <2>;
 212                         clocks = <&upg_clk>;
 213                         status = "disabled";
 214                 };
 215
 216                 upg_gio: gpio@406700 {
 217                         compatible = "brcm,brcmstb-gpio";
 218                         reg = <0x406700 0x80>;
 219                         #gpio-cells = <2>;
 220                         #interrupt-cells = <2>;
 221                         gpio-controller;
 222                         interrupt-controller;
 223                         interrupt-parent = <&upg_irq0_intc>;
 224                         interrupts = <6>;
 225                         brcm,gpio-bank-widths = <32 32 32 27>;
 226                 };
 227
 228                 enet0: ethernet@468000 {
 229                         phy-mode = "internal";
 230                         phy-handle = <&phy1>;
 231                         mac-address = [ 00 10 18 36 23 1a ];
 232                         compatible = "brcm,genet-v1";
 233                         #address-cells = <0x1>;
 234                         #size-cells = <0x1>;
 235                         reg = <0x468000 0x3c8c>;
 236                         interrupts = <69>, <79>;
 237                         interrupt-parent = <&periph_intc>;
 238                         status = "disabled";
 239
 240                         mdio@e14 {
 241                                 compatible = "brcm,genet-mdio-v1";
 242                                 #address-cells = <0x1>;
 243                                 #size-cells = <0x0>;
 244                                 reg = <0xe14 0x8>;
 245
 246                                 phy1: ethernet-phy@1 {
 247                                         max-speed = <100>;
 248                                         reg = <0x1>;
 249                                         compatible = "brcm,65nm-ephy",
 250                                                 "ethernet-phy-ieee802.3-c22";
 251                                 };
 252                         };
 253                 };
 254
 255                 ehci0: usb@488300 {
 256                         compatible = "brcm,bcm7420-ehci", "generic-ehci";
 257                         reg = <0x488300 0x100>;
 258                         interrupt-parent = <&periph_intc>;
 259                         interrupts = <60>;
 260                         status = "disabled";
 261                 };
 262
 263                 ohci0: usb@488400 {
 264                         compatible = "brcm,bcm7420-ohci", "generic-ohci";
 265                         reg = <0x488400 0x100>;
 266                         native-endian;
 267                         no-big-frame-no;
 268                         interrupt-parent = <&periph_intc>;
 269                         interrupts = <61>;
 270                         status = "disabled";
 271                 };
 272
 273                 ehci1: usb@488500 {
 274                         compatible = "brcm,bcm7420-ehci", "generic-ehci";
 275                         reg = <0x488500 0x100>;
 276                         interrupt-parent = <&periph_intc>;
 277                         interrupts = <55>;
 278                         status = "disabled";
 279                 };
 280
 281                 ohci1: usb@488600 {
 282                         compatible = "brcm,bcm7420-ohci", "generic-ohci";
 283                         reg = <0x488600 0x100>;
 284                         native-endian;
 285                         no-big-frame-no;
 286                         interrupt-parent = <&periph_intc>;
 287                         interrupts = <62>;
 288                         status = "disabled";
 289                 };
 290         };
 291 };