]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/mips/boot/dts/easy50712.dts
MIPS: Add support for fine granularity task level IRQ time accounting
[mirror_ubuntu-bionic-kernel.git] / arch / mips / boot / dts / easy50712.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6 chosen {
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8 };
9
10 memory@0 {
11 device_type = "memory";
12 reg = <0x0 0x2000000>;
13 };
14
15 fpi@10000000 {
16 #address-cells = <1>;
17 #size-cells = <1>;
18 localbus@0 {
19 #address-cells = <2>;
20 #size-cells = <1>;
21 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
22 1 0 0x4000000 0x4000010>; /* addsel1 */
23 compatible = "lantiq,localbus", "simple-bus";
24
25 nor-boot@0 {
26 compatible = "lantiq,nor";
27 bank-width = <2>;
28 reg = <0 0x0 0x2000000>;
29 #address-cells = <1>;
30 #size-cells = <1>;
31
32 partition@0 {
33 label = "uboot";
34 reg = <0x00000 0x10000>; /* 64 KB */
35 };
36
37 partition@10000 {
38 label = "uboot_env";
39 reg = <0x10000 0x10000>; /* 64 KB */
40 };
41
42 partition@20000 {
43 label = "linux";
44 reg = <0x20000 0x3d0000>;
45 };
46
47 partition@400000 {
48 label = "rootfs";
49 reg = <0x400000 0x400000>;
50 };
51 };
52 };
53
54 gpio: pinmux@E100B10 {
55 compatible = "lantiq,pinctrl-xway";
56 pinctrl-names = "default";
57 pinctrl-0 = <&state_default>;
58
59 #gpio-cells = <2>;
60 gpio-controller;
61 reg = <0xE100B10 0xA0>;
62
63 state_default: pinmux {
64 stp {
65 lantiq,groups = "stp";
66 lantiq,function = "stp";
67 };
68 exin {
69 lantiq,groups = "exin1";
70 lantiq,function = "exin";
71 };
72 pci {
73 lantiq,groups = "gnt1";
74 lantiq,function = "pci";
75 };
76 conf_out {
77 lantiq,pins = "io4", "io5", "io6"; /* stp */
78 lantiq,open-drain;
79 lantiq,pull = <0>;
80 };
81 };
82 };
83
84 etop@E180000 {
85 compatible = "lantiq,etop-xway";
86 reg = <0xE180000 0x40000>;
87 interrupt-parent = <&icu0>;
88 interrupts = <73 78>;
89 phy-mode = "rmii";
90 mac-address = [ 00 11 22 33 44 55 ];
91 };
92
93 stp0: stp@E100BB0 {
94 #gpio-cells = <2>;
95 compatible = "lantiq,gpio-stp-xway";
96 gpio-controller;
97 reg = <0xE100BB0 0x40>;
98
99 lantiq,shadow = <0xfff>;
100 lantiq,groups = <0x3>;
101 };
102
103 pci@E105400 {
104 lantiq,bus-clock = <33333333>;
105 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
106 interrupt-map = <
107 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
108 >;
109 gpios-reset = <&gpio 21 0>;
110 req-mask = <0x1>; /* GNT1 */
111 };
112
113 };
114 };