]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
[mirror_ubuntu-hirsute-kernel.git] / arch / mips / include / asm / mach-lantiq / xway / lantiq_soc.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 *
4 * Copyright (C) 2010 John Crispin <john@phrozen.org>
5 */
6
7 #ifndef _LTQ_XWAY_H__
8 #define _LTQ_XWAY_H__
9
10 #ifdef CONFIG_SOC_TYPE_XWAY
11
12 #include <lantiq.h>
13
14 /* Chip IDs */
15 #define SOC_ID_DANUBE1 0x129
16 #define SOC_ID_DANUBE2 0x12B
17 #define SOC_ID_TWINPASS 0x12D
18 #define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */
19 #define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */
20 #define SOC_ID_ARX188 0x16C
21 #define SOC_ID_ARX168_1 0x16D
22 #define SOC_ID_ARX168_2 0x16E
23 #define SOC_ID_ARX182 0x16F
24 #define SOC_ID_GRX188 0x170
25 #define SOC_ID_GRX168 0x171
26
27 #define SOC_ID_VRX288 0x1C0 /* v1.1 */
28 #define SOC_ID_VRX282 0x1C1 /* v1.1 */
29 #define SOC_ID_VRX268 0x1C2 /* v1.1 */
30 #define SOC_ID_GRX268 0x1C8 /* v1.1 */
31 #define SOC_ID_GRX288 0x1C9 /* v1.1 */
32 #define SOC_ID_VRX288_2 0x00B /* v1.2 */
33 #define SOC_ID_VRX268_2 0x00C /* v1.2 */
34 #define SOC_ID_GRX288_2 0x00D /* v1.2 */
35 #define SOC_ID_GRX282_2 0x00E /* v1.2 */
36 #define SOC_ID_VRX220 0x000
37
38 #define SOC_ID_ARX362 0x004
39 #define SOC_ID_ARX368 0x005
40 #define SOC_ID_ARX382 0x007
41 #define SOC_ID_ARX388 0x008
42 #define SOC_ID_URX388 0x009
43 #define SOC_ID_GRX383 0x010
44 #define SOC_ID_GRX369 0x011
45 #define SOC_ID_GRX387 0x00F
46 #define SOC_ID_GRX389 0x012
47
48 /* SoC Types */
49 #define SOC_TYPE_DANUBE 0x01
50 #define SOC_TYPE_TWINPASS 0x02
51 #define SOC_TYPE_AR9 0x03
52 #define SOC_TYPE_VR9 0x04 /* v1.1 */
53 #define SOC_TYPE_VR9_2 0x05 /* v1.2 */
54 #define SOC_TYPE_AMAZON_SE 0x06
55 #define SOC_TYPE_AR10 0x07
56 #define SOC_TYPE_GRX390 0x08
57 #define SOC_TYPE_VRX220 0x09
58
59 /* BOOT_SEL - find what boot media we have */
60 #define BS_EXT_ROM 0x0
61 #define BS_FLASH 0x1
62 #define BS_MII0 0x2
63 #define BS_PCI 0x3
64 #define BS_UART1 0x4
65 #define BS_SPI 0x5
66 #define BS_NAND 0x6
67 #define BS_RMII0 0x7
68
69 /* helpers used to access the cgu */
70 #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
71 #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
72 extern __iomem void *ltq_cgu_membase;
73
74 /*
75 * during early_printk no ioremap is possible
76 * let's use KSEG1 instead
77 */
78 #define LTQ_ASC1_BASE_ADDR 0x1E100C00
79 #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
80
81 /* EBU - external bus unit */
82 #define LTQ_EBU_BUSCON0 0x0060
83 #define LTQ_EBU_PCC_CON 0x0090
84 #define LTQ_EBU_PCC_IEN 0x00A4
85 #define LTQ_EBU_PCC_ISTAT 0x00A0
86 #define LTQ_EBU_BUSCON1 0x0064
87 #define LTQ_EBU_ADDRSEL1 0x0024
88 #define EBU_WRDIS 0x80000000
89
90 /* WDT */
91 #define LTQ_RST_CAUSE_WDTRST 0x20
92
93 /* MPS - multi processor unit (voice) */
94 #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
95 #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
96
97 /* allow booting xrx200 phys */
98 int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
99
100 /* request a non-gpio and set the PIO config */
101 #define PMU_PPE BIT(13)
102 extern void ltq_pmu_enable(unsigned int module);
103 extern void ltq_pmu_disable(unsigned int module);
104
105 #endif /* CONFIG_SOC_TYPE_XWAY */
106 #endif /* _LTQ_XWAY_H__ */