]>
git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blob - arch/mips/include/asm/sgi/ioc.h
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * ioc.h: Definitions for SGI I/O Controller
8 * Copyright (C) 1996 David S. Miller
9 * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
10 * Copyright (C) 2001, 2003 Ladislav Michl
16 #include <linux/types.h>
17 #include <asm/sgi/pi1.h>
20 * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
21 * happen if you try word access them. You have been warned.
24 struct sgioc_uart_regs
{
35 struct sgioc_keyb_regs
{
44 volatile u8 istat0
; /* Interrupt status zero */
45 #define SGINT_ISTAT0_FFULL 0x01
46 #define SGINT_ISTAT0_SCSI0 0x02
47 #define SGINT_ISTAT0_SCSI1 0x04
48 #define SGINT_ISTAT0_ENET 0x08
49 #define SGINT_ISTAT0_GFXDMA 0x10
50 #define SGINT_ISTAT0_PPORT 0x20
51 #define SGINT_ISTAT0_HPC2 0x40
52 #define SGINT_ISTAT0_LIO2 0x80
54 volatile u8 imask0
; /* Interrupt mask zero */
56 volatile u8 istat1
; /* Interrupt status one */
57 #define SGINT_ISTAT1_ISDNI 0x01
58 #define SGINT_ISTAT1_PWR 0x02
59 #define SGINT_ISTAT1_ISDNH 0x04
60 #define SGINT_ISTAT1_LIO3 0x08
61 #define SGINT_ISTAT1_HPC3 0x10
62 #define SGINT_ISTAT1_AFAIL 0x20
63 #define SGINT_ISTAT1_VIDEO 0x40
64 #define SGINT_ISTAT1_GIO2 0x80
66 volatile u8 imask1
; /* Interrupt mask one */
68 volatile u8 vmeistat
; /* VME interrupt status */
70 volatile u8 cmeimask0
; /* VME interrupt mask zero */
72 volatile u8 cmeimask1
; /* VME interrupt mask one */
74 volatile u8 cmepol
; /* VME polarity */
78 volatile u8 errstat
; /* Error status reg, reserved on INT2 */
81 volatile u8 tcnt0
; /* counter 0 */
83 volatile u8 tcnt1
; /* counter 1 */
85 volatile u8 tcnt2
; /* counter 2 */
87 volatile u8 tcword
; /* control word */
88 #define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */
89 #define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */
90 #define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */
91 #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */
92 #define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */
93 #define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */
94 #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */
95 #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */
96 #define SGINT_TCWORD_CMASK 0x30 /* Command mask */
97 #define SGINT_TCWORD_CLAT 0x00 /* Latch command */
98 #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */
99 #define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */
100 #define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */
101 #define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */
102 #define SGINT_TCWORD_CNT1 0x40 /* Select counter one */
103 #define SGINT_TCWORD_CNT2 0x80 /* Select counter two */
104 #define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */
108 * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz
110 #define SGINT_TIMER_CLOCK 1000000
113 * This is the constant we're using for calibrating the counter.
115 #define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255)
117 /* We need software copies of these because they are write only. */
118 extern u8 sgi_ioc_reset
, sgi_ioc_write
;
121 struct pi1_regs pport
;
123 struct sgioc_uart_regs uart
;
124 struct sgioc_keyb_regs kbdmouse
;
131 #define SGIOC_PANEL_POWERON 0x01
132 #define SGIOC_PANEL_POWERINTR 0x02
133 #define SGIOC_PANEL_VOLDNINTR 0x10
134 #define SGIOC_PANEL_VOLDNHOLD 0x20
135 #define SGIOC_PANEL_VOLUPINTR 0x40
136 #define SGIOC_PANEL_VOLUPHOLD 0x80
140 #define SGIOC_SYSID_FULLHOUSE 0x01
141 #define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
142 #define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5)
149 #define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */
150 #define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */
151 #define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */
152 #define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */
153 #define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */
154 #define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */
158 #define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */
159 #define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */
160 #define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */
161 #define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */
162 #define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */
163 #define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */
167 #define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
168 #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
169 #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
170 #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
171 #define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
172 #define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */
173 #define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */
174 #define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */
176 struct sgint_regs int3
;
178 volatile u32 extio
; /* FullHouse only */
179 #define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */
180 #define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */
181 #define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */
182 #define EXTIO_S0_RETRACE 0x1000
183 #define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */
184 #define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */
185 #define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */
186 #define EXTIO_SG_RETRACE 0x0100
187 #define EXTIO_GIO_33MHZ 0x0080
188 #define EXTIO_EISA_BUSERR 0x0040
189 #define EXTIO_MC_BUSERR 0x0020
190 #define EXTIO_HPC3_BUSERR 0x0010
191 #define EXTIO_S0_STAT_1 0x0008
192 #define EXTIO_S0_STAT_0 0x0004
193 #define EXTIO_SG_STAT_1 0x0002
194 #define EXTIO_SG_STAT_0 0x0001
197 extern struct sgioc_regs
*sgioc
;
198 extern struct sgint_regs
*sgint
;