]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/mips/kernel/vpe.c
Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
[mirror_ubuntu-bionic-kernel.git] / arch / mips / kernel / vpe.c
1 /*
2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
3 *
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
11 * for more details.
12 *
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
16 *
17 */
18
19 /*
20 * VPE support module
21 *
22 * Provides support for loading a MIPS SP program on VPE1.
23 * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
24 * (or partially linked). You should initialise your stack in the startup
25 * code. This loader looks for the symbol __start and sets up
26 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 *
28 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
29 * i.e cat spapp >/dev/vpe1.
30 *
31 * You'll need to have the following device files.
32 * mknod /dev/vpe0 c 63 0
33 * mknod /dev/vpe1 c 63 1
34 */
35 #include <linux/config.h>
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/fs.h>
39 #include <linux/init.h>
40 #include <asm/uaccess.h>
41 #include <linux/slab.h>
42 #include <linux/list.h>
43 #include <linux/vmalloc.h>
44 #include <linux/elf.h>
45 #include <linux/seq_file.h>
46 #include <linux/syscalls.h>
47 #include <linux/moduleloader.h>
48 #include <linux/interrupt.h>
49 #include <linux/poll.h>
50 #include <linux/bootmem.h>
51 #include <asm/mipsregs.h>
52 #include <asm/mipsmtregs.h>
53 #include <asm/cacheflush.h>
54 #include <asm/atomic.h>
55 #include <asm/cpu.h>
56 #include <asm/processor.h>
57 #include <asm/system.h>
58
59 typedef void *vpe_handle;
60
61 // defined here because the kernel module loader doesn't have
62 // anything to do with it.
63 #define SHN_MIPS_SCOMMON 0xff03
64
65 #ifndef ARCH_SHF_SMALL
66 #define ARCH_SHF_SMALL 0
67 #endif
68
69 /* If this is set, the section belongs in the init part of the module */
70 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
71
72 // temp number,
73 #define VPE_MAJOR 63
74
75 static char module_name[] = "vpe";
76 static int major = 0;
77
78 /* grab the likely amount of memory we will need. */
79 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
80 #define P_SIZE (2 * 1024 * 1024)
81 #else
82 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
83 #define P_SIZE (256 * 1024)
84 #endif
85
86 #define MAX_VPES 16
87
88 enum vpe_state {
89 VPE_STATE_UNUSED = 0,
90 VPE_STATE_INUSE,
91 VPE_STATE_RUNNING
92 };
93
94 enum tc_state {
95 TC_STATE_UNUSED = 0,
96 TC_STATE_INUSE,
97 TC_STATE_RUNNING,
98 TC_STATE_DYNAMIC
99 };
100
101 struct vpe;
102 typedef struct tc {
103 enum tc_state state;
104 int index;
105
106 /* parent VPE */
107 struct vpe *pvpe;
108
109 /* The list of TC's with this VPE */
110 struct list_head tc;
111
112 /* The global list of tc's */
113 struct list_head list;
114 } tc_t;
115
116 typedef struct vpe {
117 enum vpe_state state;
118
119 /* (device) minor associated with this vpe */
120 int minor;
121
122 /* elfloader stuff */
123 void *load_addr;
124 u32 len;
125 char *pbuffer;
126 u32 plen;
127
128 unsigned long __start;
129
130 /* tc's associated with this vpe */
131 struct list_head tc;
132
133 /* The list of vpe's */
134 struct list_head list;
135
136 /* shared symbol address */
137 void *shared_ptr;
138 } vpe_t;
139
140 struct vpecontrol_ {
141 /* Virtual processing elements */
142 struct list_head vpe_list;
143
144 /* Thread contexts */
145 struct list_head tc_list;
146 } vpecontrol;
147
148 static void release_progmem(void *ptr);
149 static void dump_vpe(vpe_t * v);
150 extern void save_gp_address(unsigned int secbase, unsigned int rel);
151
152 /* get the vpe associated with this minor */
153 struct vpe *get_vpe(int minor)
154 {
155 struct vpe *v;
156
157 list_for_each_entry(v, &vpecontrol.vpe_list, list) {
158 if (v->minor == minor)
159 return v;
160 }
161
162 printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
163 return NULL;
164 }
165
166 /* get the vpe associated with this minor */
167 struct tc *get_tc(int index)
168 {
169 struct tc *t;
170
171 list_for_each_entry(t, &vpecontrol.tc_list, list) {
172 if (t->index == index)
173 return t;
174 }
175
176 printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
177
178 return NULL;
179 }
180
181 struct tc *get_tc_unused(void)
182 {
183 struct tc *t;
184
185 list_for_each_entry(t, &vpecontrol.tc_list, list) {
186 if (t->state == TC_STATE_UNUSED)
187 return t;
188 }
189
190 printk(KERN_DEBUG "VPE: All TC's are in use\n");
191
192 return NULL;
193 }
194
195 /* allocate a vpe and associate it with this minor (or index) */
196 struct vpe *alloc_vpe(int minor)
197 {
198 struct vpe *v;
199
200 if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
201 printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
202 return NULL;
203 }
204
205 memset(v, 0, sizeof(struct vpe));
206
207 INIT_LIST_HEAD(&v->tc);
208 list_add_tail(&v->list, &vpecontrol.vpe_list);
209
210 v->minor = minor;
211 return v;
212 }
213
214 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
215 struct tc *alloc_tc(int index)
216 {
217 struct tc *t;
218
219 if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
220 printk(KERN_WARNING "VPE: alloc_tc no mem\n");
221 return NULL;
222 }
223
224 memset(t, 0, sizeof(struct tc));
225
226 INIT_LIST_HEAD(&t->tc);
227 list_add_tail(&t->list, &vpecontrol.tc_list);
228
229 t->index = index;
230
231 return t;
232 }
233
234 /* clean up and free everything */
235 void release_vpe(struct vpe *v)
236 {
237 list_del(&v->list);
238 if (v->load_addr)
239 release_progmem(v);
240 kfree(v);
241 }
242
243 void dump_mtregs(void)
244 {
245 unsigned long val;
246
247 val = read_c0_config3();
248 printk("config3 0x%lx MT %ld\n", val,
249 (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
250
251 val = read_c0_mvpconf0();
252 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
253 (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
254 val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
255
256 val = read_c0_mvpcontrol();
257 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
258 (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
259 (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
260 (val & MVPCONTROL_EVP));
261
262 val = read_c0_vpeconf0();
263 printk("VPEConf0 0x%lx MVP %ld\n", val,
264 (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
265 }
266
267 /* Find some VPE program space */
268 static void *alloc_progmem(u32 len)
269 {
270 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
271 /* this means you must tell linux to use less memory than you physically have */
272 return (void *)((max_pfn * PAGE_SIZE) + KSEG0);
273 #else
274 // simple grab some mem for now
275 return kmalloc(len, GFP_KERNEL);
276 #endif
277 }
278
279 static void release_progmem(void *ptr)
280 {
281 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
282 kfree(ptr);
283 #endif
284 }
285
286 /* Update size with this section: return offset. */
287 static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
288 {
289 long ret;
290
291 ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
292 *size = ret + sechdr->sh_size;
293 return ret;
294 }
295
296 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
297 might -- code, read-only data, read-write data, small data. Tally
298 sizes, and place the offsets into sh_entsize fields: high bit means it
299 belongs in init. */
300 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
301 Elf_Shdr * sechdrs, const char *secstrings)
302 {
303 static unsigned long const masks[][2] = {
304 /* NOTE: all executable code must be the first section
305 * in this array; otherwise modify the text_size
306 * finder in the two loops below */
307 {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
308 {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
309 {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
310 {ARCH_SHF_SMALL | SHF_ALLOC, 0}
311 };
312 unsigned int m, i;
313
314 for (i = 0; i < hdr->e_shnum; i++)
315 sechdrs[i].sh_entsize = ~0UL;
316
317 for (m = 0; m < ARRAY_SIZE(masks); ++m) {
318 for (i = 0; i < hdr->e_shnum; ++i) {
319 Elf_Shdr *s = &sechdrs[i];
320
321 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
322 if ((s->sh_flags & masks[m][0]) != masks[m][0]
323 || (s->sh_flags & masks[m][1])
324 || s->sh_entsize != ~0UL)
325 continue;
326 s->sh_entsize = get_offset(&mod->core_size, s);
327 }
328
329 if (m == 0)
330 mod->core_text_size = mod->core_size;
331
332 }
333 }
334
335
336 /* from module-elf32.c, but subverted a little */
337
338 struct mips_hi16 {
339 struct mips_hi16 *next;
340 Elf32_Addr *addr;
341 Elf32_Addr value;
342 };
343
344 static struct mips_hi16 *mips_hi16_list;
345 static unsigned int gp_offs, gp_addr;
346
347 static int apply_r_mips_none(struct module *me, uint32_t *location,
348 Elf32_Addr v)
349 {
350 return 0;
351 }
352
353 static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
354 Elf32_Addr v)
355 {
356 int rel;
357
358 if( !(*location & 0xffff) ) {
359 rel = (int)v - gp_addr;
360 }
361 else {
362 /* .sbss + gp(relative) + offset */
363 /* kludge! */
364 rel = (int)(short)((int)v + gp_offs +
365 (int)(short)(*location & 0xffff) - gp_addr);
366 }
367
368 if( (rel > 32768) || (rel < -32768) ) {
369 printk(KERN_ERR
370 "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
371 rel, rel);
372 return -ENOEXEC;
373 }
374
375 *location = (*location & 0xffff0000) | (rel & 0xffff);
376
377 return 0;
378 }
379
380 static int apply_r_mips_pc16(struct module *me, uint32_t *location,
381 Elf32_Addr v)
382 {
383 int rel;
384 rel = (((unsigned int)v - (unsigned int)location));
385 rel >>= 2; // because the offset is in _instructions_ not bytes.
386 rel -= 1; // and one instruction less due to the branch delay slot.
387
388 if( (rel > 32768) || (rel < -32768) ) {
389 printk(KERN_ERR
390 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
391 return -ENOEXEC;
392 }
393
394 *location = (*location & 0xffff0000) | (rel & 0xffff);
395
396 return 0;
397 }
398
399 static int apply_r_mips_32(struct module *me, uint32_t *location,
400 Elf32_Addr v)
401 {
402 *location += v;
403
404 return 0;
405 }
406
407 static int apply_r_mips_26(struct module *me, uint32_t *location,
408 Elf32_Addr v)
409 {
410 if (v % 4) {
411 printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
412 return -ENOEXEC;
413 }
414
415 /* Not desperately convinced this is a good check of an overflow condition
416 anyway. But it gets in the way of handling undefined weak symbols which
417 we want to set to zero.
418 if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
419 printk(KERN_ERR
420 "module %s: relocation overflow\n",
421 me->name);
422 return -ENOEXEC;
423 }
424 */
425
426 *location = (*location & ~0x03ffffff) |
427 ((*location + (v >> 2)) & 0x03ffffff);
428 return 0;
429 }
430
431 static int apply_r_mips_hi16(struct module *me, uint32_t *location,
432 Elf32_Addr v)
433 {
434 struct mips_hi16 *n;
435
436 /*
437 * We cannot relocate this one now because we don't know the value of
438 * the carry we need to add. Save the information, and let LO16 do the
439 * actual relocation.
440 */
441 n = kmalloc(sizeof *n, GFP_KERNEL);
442 if (!n)
443 return -ENOMEM;
444
445 n->addr = location;
446 n->value = v;
447 n->next = mips_hi16_list;
448 mips_hi16_list = n;
449
450 return 0;
451 }
452
453 static int apply_r_mips_lo16(struct module *me, uint32_t *location,
454 Elf32_Addr v)
455 {
456 unsigned long insnlo = *location;
457 Elf32_Addr val, vallo;
458
459 /* Sign extend the addend we extract from the lo insn. */
460 vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
461
462 if (mips_hi16_list != NULL) {
463 struct mips_hi16 *l;
464
465 l = mips_hi16_list;
466 while (l != NULL) {
467 struct mips_hi16 *next;
468 unsigned long insn;
469
470 /*
471 * The value for the HI16 had best be the same.
472 */
473 if (v != l->value) {
474 printk("%d != %d\n", v, l->value);
475 goto out_danger;
476 }
477
478
479 /*
480 * Do the HI16 relocation. Note that we actually don't
481 * need to know anything about the LO16 itself, except
482 * where to find the low 16 bits of the addend needed
483 * by the LO16.
484 */
485 insn = *l->addr;
486 val = ((insn & 0xffff) << 16) + vallo;
487 val += v;
488
489 /*
490 * Account for the sign extension that will happen in
491 * the low bits.
492 */
493 val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
494
495 insn = (insn & ~0xffff) | val;
496 *l->addr = insn;
497
498 next = l->next;
499 kfree(l);
500 l = next;
501 }
502
503 mips_hi16_list = NULL;
504 }
505
506 /*
507 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
508 */
509 val = v + vallo;
510 insnlo = (insnlo & ~0xffff) | (val & 0xffff);
511 *location = insnlo;
512
513 return 0;
514
515 out_danger:
516 printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
517
518 return -ENOEXEC;
519 }
520
521 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
522 Elf32_Addr v) = {
523 [R_MIPS_NONE] = apply_r_mips_none,
524 [R_MIPS_32] = apply_r_mips_32,
525 [R_MIPS_26] = apply_r_mips_26,
526 [R_MIPS_HI16] = apply_r_mips_hi16,
527 [R_MIPS_LO16] = apply_r_mips_lo16,
528 [R_MIPS_GPREL16] = apply_r_mips_gprel16,
529 [R_MIPS_PC16] = apply_r_mips_pc16
530 };
531
532
533 int apply_relocations(Elf32_Shdr *sechdrs,
534 const char *strtab,
535 unsigned int symindex,
536 unsigned int relsec,
537 struct module *me)
538 {
539 Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
540 Elf32_Sym *sym;
541 uint32_t *location;
542 unsigned int i;
543 Elf32_Addr v;
544 int res;
545
546 for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
547 Elf32_Word r_info = rel[i].r_info;
548
549 /* This is where to make the change */
550 location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
551 + rel[i].r_offset;
552 /* This is the symbol it is referring to */
553 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
554 + ELF32_R_SYM(r_info);
555
556 if (!sym->st_value) {
557 printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
558 me->name, strtab + sym->st_name);
559 /* just print the warning, dont barf */
560 }
561
562 v = sym->st_value;
563
564 res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
565 if( res ) {
566 printk(KERN_DEBUG
567 "relocation error 0x%x sym refer <%s> value 0x%x "
568 "type 0x%x r_info 0x%x\n",
569 (unsigned int)location, strtab + sym->st_name, v,
570 r_info, ELF32_R_TYPE(r_info));
571 }
572
573 if (res)
574 return res;
575 }
576
577 return 0;
578 }
579
580 void save_gp_address(unsigned int secbase, unsigned int rel)
581 {
582 gp_addr = secbase + rel;
583 gp_offs = gp_addr - (secbase & 0xffff0000);
584 }
585 /* end module-elf32.c */
586
587
588
589 /* Change all symbols so that sh_value encodes the pointer directly. */
590 static int simplify_symbols(Elf_Shdr * sechdrs,
591 unsigned int symindex,
592 const char *strtab,
593 const char *secstrings,
594 unsigned int nsecs, struct module *mod)
595 {
596 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
597 unsigned long secbase, bssbase = 0;
598 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
599 int ret = 0, size;
600
601 /* find the .bss section for COMMON symbols */
602 for (i = 0; i < nsecs; i++) {
603 if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
604 bssbase = sechdrs[i].sh_addr;
605 }
606
607 for (i = 1; i < n; i++) {
608 switch (sym[i].st_shndx) {
609 case SHN_COMMON:
610 /* Allocate space for the symbol in the .bss section. st_value is currently size.
611 We want it to have the address of the symbol. */
612
613 size = sym[i].st_value;
614 sym[i].st_value = bssbase;
615
616 bssbase += size;
617 break;
618
619 case SHN_ABS:
620 /* Don't need to do anything */
621 break;
622
623 case SHN_UNDEF:
624 /* ret = -ENOENT; */
625 break;
626
627 case SHN_MIPS_SCOMMON:
628
629 printk(KERN_DEBUG
630 "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
631 strtab + sym[i].st_name, sym[i].st_shndx);
632
633 // .sbss section
634 break;
635
636 default:
637 secbase = sechdrs[sym[i].st_shndx].sh_addr;
638
639 if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
640 save_gp_address(secbase, sym[i].st_value);
641 }
642
643 sym[i].st_value += secbase;
644 break;
645 }
646
647 }
648
649 return ret;
650 }
651
652 #ifdef DEBUG_ELFLOADER
653 static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
654 const char *strtab, struct module *mod)
655 {
656 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
657 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
658
659 printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
660 for (i = 1; i < n; i++) {
661 printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
662 strtab + sym[i].st_name, sym[i].st_value);
663 }
664 }
665 #endif
666
667 static void dump_tc(struct tc *t)
668 {
669 printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
670 t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
671 printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
672 }
673
674 static void dump_tclist(void)
675 {
676 struct tc *t;
677
678 list_for_each_entry(t, &vpecontrol.tc_list, list) {
679 dump_tc(t);
680 }
681 }
682
683 /* We are prepared so configure and start the VPE... */
684 int vpe_run(vpe_t * v)
685 {
686 unsigned long val;
687 struct tc *t;
688
689 /* check we are the Master VPE */
690 val = read_c0_vpeconf0();
691 if (!(val & VPECONF0_MVP)) {
692 printk(KERN_WARNING
693 "VPE: only Master VPE's are allowed to configure MT\n");
694 return -1;
695 }
696
697 /* disable MT (using dvpe) */
698 dvpe();
699
700 /* Put MVPE's into 'configuration state' */
701 set_c0_mvpcontrol(MVPCONTROL_VPC);
702
703 if (!list_empty(&v->tc)) {
704 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
705 printk(KERN_WARNING "VPE: TC %d is already in use.\n",
706 t->index);
707 return -ENOEXEC;
708 }
709 } else {
710 printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
711 v->minor);
712 return -ENOEXEC;
713 }
714
715 settc(t->index);
716
717 val = read_vpe_c0_vpeconf0();
718
719 /* should check it is halted, and not activated */
720 if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
721 printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
722 t->index);
723
724 dump_tclist();
725 return -ENOEXEC;
726 }
727
728 /* Write the address we want it to start running from in the TCPC register. */
729 write_tc_c0_tcrestart((unsigned long)v->__start);
730
731 /* write the sivc_info address to tccontext */
732 write_tc_c0_tccontext((unsigned long)0);
733
734 /* Set up the XTC bit in vpeconf0 to point at our tc */
735 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
736
737 /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
738 val = read_tc_c0_tcstatus();
739 val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
740 write_tc_c0_tcstatus(val);
741
742 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
743
744 /* set up VPE1 */
745 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's
746 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE
747
748 /*
749 * The sde-kit passes 'memsize' to __start in $a3, so set something
750 * here...
751 * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
752 * DFLT_HEAP_SIZE when you compile your program
753 */
754
755 mttgpr(7, 0);
756
757 /* set config to be the same as vpe0, particularly kseg0 coherency alg */
758 write_vpe_c0_config(read_c0_config());
759
760 /* clear out any left overs from a previous program */
761 write_vpe_c0_cause(0);
762
763 /* take system out of configuration state */
764 clear_c0_mvpcontrol(MVPCONTROL_VPC);
765
766 /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
767 write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
768
769 /* set it running */
770 evpe(EVPE_ENABLE);
771
772 return 0;
773 }
774
775 static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs,
776 unsigned int symindex, const char *strtab,
777 struct module *mod)
778 {
779 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
780 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
781
782 for (i = 1; i < n; i++) {
783 if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
784 v->__start = sym[i].st_value;
785 }
786
787 if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
788 v->shared_ptr = (void *)sym[i].st_value;
789 }
790 }
791
792 return 0;
793 }
794
795 /* Allocates a VPE with some program code space(the load address), copies the contents
796 of the program (p)buffer performing relocatations/etc, free's it when finished.
797 */
798 int vpe_elfload(vpe_t * v)
799 {
800 Elf_Ehdr *hdr;
801 Elf_Shdr *sechdrs;
802 long err = 0;
803 char *secstrings, *strtab = NULL;
804 unsigned int len, i, symindex = 0, strindex = 0;
805
806 struct module mod; // so we can re-use the relocations code
807
808 memset(&mod, 0, sizeof(struct module));
809 strcpy(mod.name, "VPE dummy prog module");
810
811 hdr = (Elf_Ehdr *) v->pbuffer;
812 len = v->plen;
813
814 /* Sanity checks against insmoding binaries or wrong arch,
815 weird elf version */
816 if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
817 || hdr->e_type != ET_REL || !elf_check_arch(hdr)
818 || hdr->e_shentsize != sizeof(*sechdrs)) {
819 printk(KERN_WARNING
820 "VPE program, wrong arch or weird elf version\n");
821
822 return -ENOEXEC;
823 }
824
825 if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
826 printk(KERN_ERR "VPE program length %u truncated\n", len);
827 return -ENOEXEC;
828 }
829
830 /* Convenience variables */
831 sechdrs = (void *)hdr + hdr->e_shoff;
832 secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
833 sechdrs[0].sh_addr = 0;
834
835 /* And these should exist, but gcc whinges if we don't init them */
836 symindex = strindex = 0;
837
838 for (i = 1; i < hdr->e_shnum; i++) {
839
840 if (sechdrs[i].sh_type != SHT_NOBITS
841 && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
842 printk(KERN_ERR "VPE program length %u truncated\n",
843 len);
844 return -ENOEXEC;
845 }
846
847 /* Mark all sections sh_addr with their address in the
848 temporary image. */
849 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
850
851 /* Internal symbols and strings. */
852 if (sechdrs[i].sh_type == SHT_SYMTAB) {
853 symindex = i;
854 strindex = sechdrs[i].sh_link;
855 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
856 }
857 }
858
859 layout_sections(&mod, hdr, sechdrs, secstrings);
860
861 v->load_addr = alloc_progmem(mod.core_size);
862 memset(v->load_addr, 0, mod.core_size);
863
864 printk("VPE elf_loader: loading to %p\n", v->load_addr);
865
866 for (i = 0; i < hdr->e_shnum; i++) {
867 void *dest;
868
869 if (!(sechdrs[i].sh_flags & SHF_ALLOC))
870 continue;
871
872 dest = v->load_addr + sechdrs[i].sh_entsize;
873
874 if (sechdrs[i].sh_type != SHT_NOBITS)
875 memcpy(dest, (void *)sechdrs[i].sh_addr,
876 sechdrs[i].sh_size);
877 /* Update sh_addr to point to copy in image. */
878 sechdrs[i].sh_addr = (unsigned long)dest;
879 }
880
881 /* Fix up syms, so that st_value is a pointer to location. */
882 err =
883 simplify_symbols(sechdrs, symindex, strtab, secstrings,
884 hdr->e_shnum, &mod);
885 if (err < 0) {
886 printk(KERN_WARNING "VPE: unable to simplify symbols\n");
887 goto cleanup;
888 }
889
890 /* Now do relocations. */
891 for (i = 1; i < hdr->e_shnum; i++) {
892 const char *strtab = (char *)sechdrs[strindex].sh_addr;
893 unsigned int info = sechdrs[i].sh_info;
894
895 /* Not a valid relocation section? */
896 if (info >= hdr->e_shnum)
897 continue;
898
899 /* Don't bother with non-allocated sections */
900 if (!(sechdrs[info].sh_flags & SHF_ALLOC))
901 continue;
902
903 if (sechdrs[i].sh_type == SHT_REL)
904 err =
905 apply_relocations(sechdrs, strtab, symindex, i, &mod);
906 else if (sechdrs[i].sh_type == SHT_RELA)
907 err = apply_relocate_add(sechdrs, strtab, symindex, i,
908 &mod);
909 if (err < 0) {
910 printk(KERN_WARNING
911 "vpe_elfload: error in relocations err %ld\n",
912 err);
913 goto cleanup;
914 }
915 }
916
917 /* make sure it's physically written out */
918 flush_icache_range((unsigned long)v->load_addr,
919 (unsigned long)v->load_addr + v->len);
920
921 if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
922
923 printk(KERN_WARNING
924 "VPE: program doesn't contain __start or vpe_shared symbols\n");
925 err = -ENOEXEC;
926 }
927
928 printk(" elf loaded\n");
929
930 cleanup:
931 return err;
932 }
933
934 static void dump_vpe(vpe_t * v)
935 {
936 struct tc *t;
937
938 printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
939 printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
940
941 list_for_each_entry(t, &vpecontrol.tc_list, list) {
942 dump_tc(t);
943 }
944 }
945
946 /* checks for VPE is unused and gets ready to load program */
947 static int vpe_open(struct inode *inode, struct file *filp)
948 {
949 int minor;
950 vpe_t *v;
951
952 /* assume only 1 device at the mo. */
953 if ((minor = MINOR(inode->i_rdev)) != 1) {
954 printk(KERN_WARNING "VPE: only vpe1 is supported\n");
955 return -ENODEV;
956 }
957
958 if ((v = get_vpe(minor)) == NULL) {
959 printk(KERN_WARNING "VPE: unable to get vpe\n");
960 return -ENODEV;
961 }
962
963 if (v->state != VPE_STATE_UNUSED) {
964 unsigned long tmp;
965 struct tc *t;
966
967 printk(KERN_WARNING "VPE: device %d already in use\n", minor);
968
969 dvpe();
970 dump_vpe(v);
971
972 printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
973
974 release_progmem(v->load_addr);
975
976 t = get_tc(minor);
977 settc(minor);
978 tmp = read_tc_c0_tcstatus();
979
980 /* mark not allocated and not dynamically allocatable */
981 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
982 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
983 write_tc_c0_tcstatus(tmp);
984
985 write_tc_c0_tchalt(TCHALT_H);
986
987 }
988
989 // allocate it so when we get write ops we know it's expected.
990 v->state = VPE_STATE_INUSE;
991
992 /* this of-course trashes what was there before... */
993 v->pbuffer = vmalloc(P_SIZE);
994 v->plen = P_SIZE;
995 v->load_addr = NULL;
996 v->len = 0;
997
998 return 0;
999 }
1000
1001 static int vpe_release(struct inode *inode, struct file *filp)
1002 {
1003 int minor, ret = 0;
1004 vpe_t *v;
1005 Elf_Ehdr *hdr;
1006
1007 minor = MINOR(inode->i_rdev);
1008 if ((v = get_vpe(minor)) == NULL)
1009 return -ENODEV;
1010
1011 // simple case of fire and forget, so tell the VPE to run...
1012
1013 hdr = (Elf_Ehdr *) v->pbuffer;
1014 if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
1015 if (vpe_elfload(v) >= 0)
1016 vpe_run(v);
1017 else {
1018 printk(KERN_WARNING "VPE: ELF load failed.\n");
1019 ret = -ENOEXEC;
1020 }
1021 } else {
1022 printk(KERN_WARNING "VPE: only elf files are supported\n");
1023 ret = -ENOEXEC;
1024 }
1025
1026 // cleanup any temp buffers
1027 if (v->pbuffer)
1028 vfree(v->pbuffer);
1029 v->plen = 0;
1030 return ret;
1031 }
1032
1033 static ssize_t vpe_write(struct file *file, const char __user * buffer,
1034 size_t count, loff_t * ppos)
1035 {
1036 int minor;
1037 size_t ret = count;
1038 vpe_t *v;
1039
1040 minor = MINOR(file->f_dentry->d_inode->i_rdev);
1041 if ((v = get_vpe(minor)) == NULL)
1042 return -ENODEV;
1043
1044 if (v->pbuffer == NULL) {
1045 printk(KERN_ERR "vpe_write: no pbuffer\n");
1046 return -ENOMEM;
1047 }
1048
1049 if ((count + v->len) > v->plen) {
1050 printk(KERN_WARNING
1051 "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
1052 return -ENOMEM;
1053 }
1054
1055 count -= copy_from_user(v->pbuffer + v->len, buffer, count);
1056 if (!count) {
1057 printk("vpe_write: copy_to_user failed\n");
1058 return -EFAULT;
1059 }
1060
1061 v->len += count;
1062 return ret;
1063 }
1064
1065 static struct file_operations vpe_fops = {
1066 .owner = THIS_MODULE,
1067 .open = vpe_open,
1068 .release = vpe_release,
1069 .write = vpe_write
1070 };
1071
1072 /* module wrapper entry points */
1073 /* give me a vpe */
1074 vpe_handle vpe_alloc(void)
1075 {
1076 int i;
1077 struct vpe *v;
1078
1079 /* find a vpe */
1080 for (i = 1; i < MAX_VPES; i++) {
1081 if ((v = get_vpe(i)) != NULL) {
1082 v->state = VPE_STATE_INUSE;
1083 return v;
1084 }
1085 }
1086 return NULL;
1087 }
1088
1089 EXPORT_SYMBOL(vpe_alloc);
1090
1091 /* start running from here */
1092 int vpe_start(vpe_handle vpe, unsigned long start)
1093 {
1094 struct vpe *v = vpe;
1095
1096 v->__start = start;
1097 return vpe_run(v);
1098 }
1099
1100 EXPORT_SYMBOL(vpe_start);
1101
1102 /* halt it for now */
1103 int vpe_stop(vpe_handle vpe)
1104 {
1105 struct vpe *v = vpe;
1106 struct tc *t;
1107 unsigned int evpe_flags;
1108
1109 evpe_flags = dvpe();
1110
1111 if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
1112
1113 settc(t->index);
1114 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1115 }
1116
1117 evpe(evpe_flags);
1118
1119 return 0;
1120 }
1121
1122 EXPORT_SYMBOL(vpe_stop);
1123
1124 /* I've done with it thank you */
1125 int vpe_free(vpe_handle vpe)
1126 {
1127 struct vpe *v = vpe;
1128 struct tc *t;
1129 unsigned int evpe_flags;
1130
1131 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
1132 return -ENOEXEC;
1133 }
1134
1135 evpe_flags = dvpe();
1136
1137 /* Put MVPE's into 'configuration state' */
1138 set_c0_mvpcontrol(MVPCONTROL_VPC);
1139
1140 settc(t->index);
1141 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1142
1143 /* mark the TC unallocated and halt'ed */
1144 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
1145 write_tc_c0_tchalt(TCHALT_H);
1146
1147 v->state = VPE_STATE_UNUSED;
1148
1149 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1150 evpe(evpe_flags);
1151
1152 return 0;
1153 }
1154
1155 EXPORT_SYMBOL(vpe_free);
1156
1157 void *vpe_get_shared(int index)
1158 {
1159 struct vpe *v;
1160
1161 if ((v = get_vpe(index)) == NULL) {
1162 printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
1163 return NULL;
1164 }
1165
1166 return v->shared_ptr;
1167 }
1168
1169 EXPORT_SYMBOL(vpe_get_shared);
1170
1171 static int __init vpe_module_init(void)
1172 {
1173 struct vpe *v = NULL;
1174 struct tc *t;
1175 unsigned long val;
1176 int i;
1177
1178 if (!cpu_has_mipsmt) {
1179 printk("VPE loader: not a MIPS MT capable processor\n");
1180 return -ENODEV;
1181 }
1182
1183 if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) {
1184 printk("VPE loader: unable to register character device\n");
1185 return -EBUSY;
1186 }
1187
1188 if (major == 0)
1189 major = VPE_MAJOR;
1190
1191 dmt();
1192 dvpe();
1193
1194 /* Put MVPE's into 'configuration state' */
1195 set_c0_mvpcontrol(MVPCONTROL_VPC);
1196
1197 /* dump_mtregs(); */
1198
1199 INIT_LIST_HEAD(&vpecontrol.vpe_list);
1200 INIT_LIST_HEAD(&vpecontrol.tc_list);
1201
1202 val = read_c0_mvpconf0();
1203 for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
1204 t = alloc_tc(i);
1205
1206 /* VPE's */
1207 if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
1208 settc(i);
1209
1210 if ((v = alloc_vpe(i)) == NULL) {
1211 printk(KERN_WARNING "VPE: unable to allocate VPE\n");
1212 return -ENODEV;
1213 }
1214
1215 list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */
1216
1217 /* deactivate all but vpe0 */
1218 if (i != 0) {
1219 unsigned long tmp = read_vpe_c0_vpeconf0();
1220
1221 tmp &= ~VPECONF0_VPA;
1222
1223 /* master VPE */
1224 tmp |= VPECONF0_MVP;
1225 write_vpe_c0_vpeconf0(tmp);
1226 }
1227
1228 /* disable multi-threading with TC's */
1229 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
1230
1231 if (i != 0) {
1232 write_vpe_c0_status((read_c0_status() &
1233 ~(ST0_IM | ST0_IE | ST0_KSU))
1234 | ST0_CU0);
1235
1236 /* set config to be the same as vpe0, particularly kseg0 coherency alg */
1237 write_vpe_c0_config(read_c0_config());
1238 }
1239
1240 }
1241
1242 /* TC's */
1243 t->pvpe = v; /* set the parent vpe */
1244
1245 if (i != 0) {
1246 unsigned long tmp;
1247
1248 /* tc 0 will of course be running.... */
1249 if (i == 0)
1250 t->state = TC_STATE_RUNNING;
1251
1252 settc(i);
1253
1254 /* bind a TC to each VPE, May as well put all excess TC's
1255 on the last VPE */
1256 if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
1257 write_tc_c0_tcbind(read_tc_c0_tcbind() |
1258 ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
1259 else
1260 write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
1261
1262 tmp = read_tc_c0_tcstatus();
1263
1264 /* mark not allocated and not dynamically allocatable */
1265 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1266 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1267 write_tc_c0_tcstatus(tmp);
1268
1269 write_tc_c0_tchalt(TCHALT_H);
1270 }
1271 }
1272
1273 /* release config state */
1274 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1275
1276 return 0;
1277 }
1278
1279 static void __exit vpe_module_exit(void)
1280 {
1281 struct vpe *v, *n;
1282
1283 list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
1284 if (v->state != VPE_STATE_UNUSED) {
1285 release_vpe(v);
1286 }
1287 }
1288
1289 unregister_chrdev(major, module_name);
1290 }
1291
1292 module_init(vpe_module_init);
1293 module_exit(vpe_module_exit);
1294 MODULE_DESCRIPTION("MIPS VPE Loader");
1295 MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
1296 MODULE_LICENSE("GPL");