arch/mips/sibyte/bcm1480/smp.c

   1 /*
   2  * Copyright (C) 2001,2002,2004 Broadcom Corporation
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version 2
   7  * of the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include <linux/smp.h>
  22 #include <linux/kernel_stat.h>
  23 #include <linux/sched.h>
  24 #include <linux/sched/task_stack.h>
  25
  26 #include <asm/mmu_context.h>
  27 #include <asm/io.h>
  28 #include <asm/fw/cfe/cfe_api.h>
  29 #include <asm/sibyte/sb1250.h>
  30 #include <asm/sibyte/bcm1480_regs.h>
  31 #include <asm/sibyte/bcm1480_int.h>
  32
  33 /*
  34  * These are routines for dealing with the bcm1480 smp capabilities
  35  * independent of board/firmware
  36  */
  37
  38 static void *mailbox_0_set_regs[] = {
  39         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  40         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  41         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  42         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
  43 };
  44
  45 static void *mailbox_0_clear_regs[] = {
  46         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  47         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  48         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  49         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
  50 };
  51
  52 static void *mailbox_0_regs[] = {
  53         IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  54         IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  55         IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  56         IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
  57 };
  58
  59 /*
  60  * SMP init and finish on secondary CPUs
  61  */
  62 void bcm1480_smp_init(void)
  63 {
  64         unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
  65                 STATUSF_IP1 | STATUSF_IP0;
  66
  67         /* Set interrupt mask, but don't enable */
  68         change_c0_status(ST0_IM, imask);
  69 }
  70
  71 /*
  72  * These are routines for dealing with the sb1250 smp capabilities
  73  * independent of board/firmware
  74  */
  75
  76 /*
  77  * Simple enough; everything is set up, so just poke the appropriate mailbox
  78  * register, and we should be set
  79  */
  80 static void bcm1480_send_ipi_single(int cpu, unsigned int action)
  81 {
  82         __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
  83 }
  84
  85 static void bcm1480_send_ipi_mask(const struct cpumask *mask,
  86                                   unsigned int action)
  87 {
  88         unsigned int i;
  89
  90         for_each_cpu(i, mask)
  91                 bcm1480_send_ipi_single(i, action);
  92 }
  93
  94 /*
  95  * Code to run on secondary just after probing the CPU
  96  */
  97 static void bcm1480_init_secondary(void)
  98 {
  99         extern void bcm1480_smp_init(void);
 100
 101         bcm1480_smp_init();
 102 }
 103
 104 /*
 105  * Do any tidying up before marking online and running the idle
 106  * loop
 107  */
 108 static void bcm1480_smp_finish(void)
 109 {
 110         extern void sb1480_clockevent_init(void);
 111
 112         sb1480_clockevent_init();
 113         local_irq_enable();
 114 }
 115
 116 /*
 117  * Setup the PC, SP, and GP of a secondary processor and start it
 118  * running!
 119  */
 120 static void bcm1480_boot_secondary(int cpu, struct task_struct *idle)
 121 {
 122         int retval;
 123
 124         retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
 125                                __KSTK_TOS(idle),
 126                                (unsigned long)task_thread_info(idle), 0);
 127         if (retval != 0)
 128                 printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
 129 }
 130
 131 /*
 132  * Use CFE to find out how many CPUs are available, setting up
 133  * cpu_possible_mask and the logical/physical mappings.
 134  * XXXKW will the boot CPU ever not be physical 0?
 135  *
 136  * Common setup before any secondaries are started
 137  */
 138 static void __init bcm1480_smp_setup(void)
 139 {
 140         int i, num;
 141
 142         init_cpu_possible(cpumask_of(0));
 143         __cpu_number_map[0] = 0;
 144         __cpu_logical_map[0] = 0;
 145
 146         for (i = 1, num = 0; i < NR_CPUS; i++) {
 147                 if (cfe_cpu_stop(i) == 0) {
 148                         set_cpu_possible(i, true);
 149                         __cpu_number_map[i] = ++num;
 150                         __cpu_logical_map[num] = i;
 151                 }
 152         }
 153         printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
 154 }
 155
 156 static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
 157 {
 158 }
 159
 160 struct plat_smp_ops bcm1480_smp_ops = {
 161         .send_ipi_single        = bcm1480_send_ipi_single,
 162         .send_ipi_mask          = bcm1480_send_ipi_mask,
 163         .init_secondary         = bcm1480_init_secondary,
 164         .smp_finish             = bcm1480_smp_finish,
 165         .boot_secondary         = bcm1480_boot_secondary,
 166         .smp_setup              = bcm1480_smp_setup,
 167         .prepare_cpus           = bcm1480_prepare_cpus,
 168 };
 169
 170 void bcm1480_mailbox_interrupt(void)
 171 {
 172         int cpu = smp_processor_id();
 173         int irq = K_BCM1480_INT_MBOX_0_0;
 174         unsigned int action;
 175
 176         kstat_incr_irq_this_cpu(irq);
 177         /* Load the mailbox register to figure out what we're supposed to do */
 178         action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
 179
 180         /* Clear the mailbox to clear the interrupt */
 181         __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
 182
 183         if (action & SMP_RESCHEDULE_YOURSELF)
 184                 scheduler_ipi();
 185
 186         if (action & SMP_CALL_FUNCTION) {
 187                 irq_enter();
 188                 generic_smp_call_function_interrupt();
 189                 irq_exit();
 190         }
 191 }