]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/mn10300/Kconfig
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[mirror_ubuntu-artful-kernel.git] / arch / mn10300 / Kconfig
1 config MN10300
2 def_bool y
3 select HAVE_EXIT_THREAD
4 select HAVE_OPROFILE
5 select HAVE_UID16
6 select GENERIC_IRQ_SHOW
7 select ARCH_WANT_IPC_PARSE_VERSION
8 select HAVE_ARCH_TRACEHOOK
9 select HAVE_ARCH_KGDB
10 select GENERIC_ATOMIC64
11 select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
12 select VIRT_TO_BUS
13 select GENERIC_CLOCKEVENTS
14 select MODULES_USE_ELF_RELA
15 select OLD_SIGSUSPEND3
16 select OLD_SIGACTION
17 select HAVE_DEBUG_STACKOVERFLOW
18 select ARCH_NO_COHERENT_DMA_MMAP
19
20 config AM33_2
21 def_bool n
22
23 config AM33_3
24 def_bool n
25
26 config AM34_2
27 def_bool n
28 select MN10300_HAS_ATOMIC_OPS_UNIT
29 select MN10300_HAS_CACHE_SNOOP
30
31 config ERRATUM_NEED_TO_RELOAD_MMUCTR
32 def_bool y if AM33_3 || AM34_2
33
34 config MMU
35 def_bool y
36
37 config HIGHMEM
38 def_bool n
39
40 config NUMA
41 def_bool n
42
43 config RWSEM_GENERIC_SPINLOCK
44 def_bool y
45
46 config RWSEM_XCHGADD_ALGORITHM
47 bool
48
49 config GENERIC_CALIBRATE_DELAY
50 def_bool y
51
52 config GENERIC_HWEIGHT
53 def_bool y
54
55 config GENERIC_BUG
56 def_bool y
57 depends on BUG
58
59 config QUICKLIST
60 def_bool y
61
62 config ARCH_HAS_ILOG2_U32
63 def_bool y
64
65 config HOTPLUG_CPU
66 def_bool n
67
68 source "init/Kconfig"
69
70 source "kernel/Kconfig.freezer"
71
72
73 menu "Panasonic MN10300 system setup"
74
75 choice
76 prompt "Unit type"
77 default MN10300_UNIT_ASB2303
78 help
79 This option specifies board for which the kernel will be
80 compiled. It affects the external peripherals catered for.
81
82 config MN10300_UNIT_ASB2303
83 bool "ASB2303"
84
85 config MN10300_UNIT_ASB2305
86 bool "ASB2305"
87
88 config MN10300_UNIT_ASB2364
89 bool "ASB2364"
90 select SMSC911X_ARCH_HOOKS if SMSC911X
91
92 endchoice
93
94 choice
95 prompt "Processor support"
96 default MN10300_PROC_MN103E010
97 help
98 This option specifies the processor for which the kernel will be
99 compiled. It affects the on-chip peripherals catered for.
100
101 config MN10300_PROC_MN103E010
102 bool "MN103E010"
103 depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
104 select AM33_2
105 select MN10300_PROC_HAS_TTYSM0
106 select MN10300_PROC_HAS_TTYSM1
107 select MN10300_PROC_HAS_TTYSM2
108
109 config MN10300_PROC_MN2WS0050
110 bool "MN2WS0050"
111 depends on MN10300_UNIT_ASB2364
112 select AM34_2
113 select MN10300_PROC_HAS_TTYSM0
114 select MN10300_PROC_HAS_TTYSM1
115 select MN10300_PROC_HAS_TTYSM2
116
117 endchoice
118
119 config MN10300_HAS_ATOMIC_OPS_UNIT
120 def_bool n
121 help
122 This should be enabled if the processor has an atomic ops unit
123 capable of doing LL/SC equivalent operations.
124
125 config FPU
126 bool "FPU present"
127 default y
128 depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
129
130 config LAZY_SAVE_FPU
131 bool "Save FPU state lazily"
132 default y
133 depends on FPU && !SMP
134 help
135 Enable this to be lazy in the saving of the FPU state to the owning
136 task's thread struct. This is useful if most tasks on the system
137 don't use the FPU as only those tasks that use it will pass it
138 between them, and the state needn't be saved for a task that isn't
139 using it.
140
141 This can't be so easily used on SMP as the process that owns the FPU
142 state on a CPU may be currently running on another CPU, so for the
143 moment, it is disabled.
144
145 source "arch/mn10300/mm/Kconfig.cache"
146
147 config MN10300_TLB_USE_PIDR
148 def_bool y
149
150 menu "Memory layout options"
151
152 config KERNEL_RAM_BASE_ADDRESS
153 hex "Base address of kernel RAM"
154 default "0x90000000"
155
156 config INTERRUPT_VECTOR_BASE
157 hex "Base address of vector table"
158 default "0x90000000"
159 help
160 The base address of the vector table will be programmed into
161 the TBR register. It must be on 16MiB address boundary.
162
163 config KERNEL_TEXT_ADDRESS
164 hex "Base address of kernel"
165 default "0x90001000"
166
167 config KERNEL_ZIMAGE_BASE_ADDRESS
168 hex "Base address of compressed vmlinux image"
169 default "0x50700000"
170
171 config BOOT_STACK_OFFSET
172 hex
173 default "0xF00" if SMP
174 default "0xFF0" if !SMP
175
176 config BOOT_STACK_SIZE
177 hex
178 depends on SMP
179 default "0x100"
180 endmenu
181
182 config SMP
183 bool "Symmetric multi-processing support"
184 default y
185 depends on MN10300_PROC_MN2WS0050
186 ---help---
187 This enables support for systems with more than one CPU. If you have
188 a system with only one CPU, say N. If you have a system with more
189 than one CPU, say Y.
190
191 If you say N here, the kernel will run on uni- and multiprocessor
192 machines, but will use only one CPU of a multiprocessor machine. If
193 you say Y here, the kernel will run on many, but not all,
194 uniprocessor machines. On a uniprocessor machine, the kernel
195 will run faster if you say N here.
196
197 See also <file:Documentation/x86/i386/IO-APIC.txt>,
198 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
199 <http://www.tldp.org/docs.html#howto>.
200
201 If you don't know what to do here, say N.
202
203 config NR_CPUS
204 int
205 depends on SMP
206 default "2"
207
208 source "kernel/Kconfig.preempt"
209
210 config MN10300_CURRENT_IN_E2
211 bool "Hold current task address in E2 register"
212 depends on !SMP
213 default y
214 help
215 This option removes the E2/R2 register from the set available to gcc
216 for normal use and instead uses it to store the address of the
217 current process's task_struct whilst in the kernel.
218
219 This means the kernel doesn't need to calculate the address each time
220 "current" is used (take SP, AND with mask and dereference pointer
221 just to get the address), and instead can just use E2+offset
222 addressing each time.
223
224 This has no effect on userspace.
225
226 config MN10300_USING_JTAG
227 bool "Using JTAG to debug kernel"
228 default y
229 help
230 This options indicates that JTAG will be used to debug the kernel. It
231 suppresses the use of certain hardware debugging features, such as
232 single-stepping, which are taken over completely by the JTAG unit.
233
234 source "kernel/Kconfig.hz"
235
236 config MN10300_RTC
237 bool "Using MN10300 RTC"
238 depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
239 select RTC_CLASS
240 select RTC_DRV_CMOS
241 select RTC_SYSTOHC
242 default n
243 help
244 This option enables support for the RTC, thus enabling time to be
245 tracked, even when system is powered down. This is available on-chip
246 on the MN103E010.
247
248 config MN10300_WD_TIMER
249 bool "Using MN10300 watchdog timer"
250 default y
251 help
252 This options indicates that the watchdog timer will be used.
253
254 config PCI
255 bool "Use PCI"
256 depends on MN10300_UNIT_ASB2305
257 default y
258 select GENERIC_PCI_IOMAP
259 help
260 Some systems (such as the ASB2305) have PCI onboard. If you have one
261 of these boards and you wish to use the PCI facilities, say Y here.
262
263 The PCI-HOWTO, available from
264 <http://www.tldp.org/docs.html#howto>, contains valuable
265 information about which PCI hardware does work under Linux and which
266 doesn't.
267
268 source "drivers/pci/Kconfig"
269
270 source "drivers/pcmcia/Kconfig"
271
272 menu "MN10300 internal serial options"
273
274 config MN10300_PROC_HAS_TTYSM0
275 bool
276 default n
277
278 config MN10300_PROC_HAS_TTYSM1
279 bool
280 default n
281
282 config MN10300_PROC_HAS_TTYSM2
283 bool
284 default n
285
286 config MN10300_TTYSM
287 bool "Support for ttySM serial ports"
288 depends on MN10300
289 default y
290 select SERIAL_CORE
291 help
292 This option enables support for the on-chip serial ports that the
293 MN10300 has available.
294
295 config MN10300_TTYSM_CONSOLE
296 bool "Support for console on ttySM serial ports"
297 depends on MN10300_TTYSM
298 select SERIAL_CORE_CONSOLE
299 help
300 This option enables support for a console on the on-chip serial ports
301 that the MN10300 has available.
302
303 #
304 # /dev/ttySM0
305 #
306 config MN10300_TTYSM0
307 bool "Enable SIF0 (/dev/ttySM0)"
308 depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
309 help
310 Enable access to SIF0 through /dev/ttySM0 or gdb-stub
311
312 choice
313 prompt "Select the timer to supply the clock for SIF0"
314 default MN10300_TTYSM0_TIMER8
315 depends on MN10300_TTYSM0
316
317 config MN10300_TTYSM0_TIMER8
318 bool "Use timer 8 (16-bit)"
319
320 config MN10300_TTYSM0_TIMER2
321 bool "Use timer 2 (8-bit)"
322
323 endchoice
324
325 #
326 # /dev/ttySM1
327 #
328 config MN10300_TTYSM1
329 bool "Enable SIF1 (/dev/ttySM1)"
330 depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
331 help
332 Enable access to SIF1 through /dev/ttySM1 or gdb-stub
333
334 choice
335 prompt "Select the timer to supply the clock for SIF1"
336 default MN10300_TTYSM1_TIMER12 \
337 if !(AM33_2 || AM33_3)
338 default MN10300_TTYSM1_TIMER9 \
339 if AM33_2 || AM33_3
340 depends on MN10300_TTYSM1
341
342 config MN10300_TTYSM1_TIMER12
343 bool "Use timer 12 (16-bit)"
344 depends on !(AM33_2 || AM33_3)
345
346 config MN10300_TTYSM1_TIMER9
347 bool "Use timer 9 (16-bit)"
348 depends on AM33_2 || AM33_3
349
350 config MN10300_TTYSM1_TIMER3
351 bool "Use timer 3 (8-bit)"
352 depends on AM33_2 || AM33_3
353
354 endchoice
355
356 #
357 # /dev/ttySM2
358 #
359 config MN10300_TTYSM2
360 bool "Enable SIF2 (/dev/ttySM2)"
361 depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
362 help
363 Enable access to SIF2 through /dev/ttySM2 or gdb-stub
364
365 choice
366 prompt "Select the timer to supply the clock for SIF2"
367 default MN10300_TTYSM2_TIMER3 \
368 if !(AM33_2 || AM33_3)
369 default MN10300_TTYSM2_TIMER10 \
370 if AM33_2 || AM33_3
371 depends on MN10300_TTYSM2
372
373 config MN10300_TTYSM2_TIMER9
374 bool "Use timer 9 (16-bit)"
375 depends on !(AM33_2 || AM33_3)
376
377 config MN10300_TTYSM2_TIMER1
378 bool "Use timer 1 (8-bit)"
379 depends on !(AM33_2 || AM33_3)
380
381 config MN10300_TTYSM2_TIMER3
382 bool "Use timer 3 (8-bit)"
383 depends on !(AM33_2 || AM33_3)
384
385 config MN10300_TTYSM2_TIMER10
386 bool "Use timer 10 (16-bit)"
387 depends on AM33_2 || AM33_3
388
389 endchoice
390
391 config MN10300_TTYSM2_CTS
392 bool "Enable the use of the CTS line /dev/ttySM2"
393 depends on MN10300_TTYSM2 && AM33_2
394
395 endmenu
396
397 menu "Interrupt request priority options"
398
399 comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)"
400
401 comment "____Non-maskable interrupt levels____"
402 comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
403
404 config DEBUGGER_IRQ_LEVEL
405 int "DEBUGGER interrupt priority"
406 depends on KERNEL_DEBUGGER
407 range 0 1 if LINUX_CLI_LEVEL = 2
408 range 0 2 if LINUX_CLI_LEVEL = 3
409 range 0 3 if LINUX_CLI_LEVEL = 4
410 range 0 4 if LINUX_CLI_LEVEL = 5
411 range 0 5 if LINUX_CLI_LEVEL = 6
412 default 0
413
414 comment "The following must be set to a higher priority than local_irq_disable()"
415
416 config MN10300_SERIAL_IRQ_LEVEL
417 int "MN10300 on-chip serial interrupt priority"
418 depends on MN10300_TTYSM
419 range 1 1 if LINUX_CLI_LEVEL = 2
420 range 1 2 if LINUX_CLI_LEVEL = 3
421 range 1 3 if LINUX_CLI_LEVEL = 4
422 range 1 4 if LINUX_CLI_LEVEL = 5
423 range 1 5 if LINUX_CLI_LEVEL = 6
424 default 1
425
426 comment "-"
427 comment "____Maskable interrupt levels____"
428
429 config LINUX_CLI_LEVEL
430 int "The highest interrupt priority excluded by local_irq_disable() (2-6)"
431 range 2 6
432 default 2
433 help
434 local_irq_disable() doesn't actually disable maskable interrupts -
435 what it does is restrict the levels of interrupt which are permitted
436 (a lower level indicates a higher priority) by lowering the value in
437 EPSW.IM from 7. Any interrupt is permitted for which the level is
438 lower than EPSW.IM.
439
440 Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
441 serial DMA interrupts are allowed to interrupt normal disabled
442 sections.
443
444 comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL"
445
446 config TIMER_IRQ_LEVEL
447 int "Kernel timer interrupt priority"
448 range LINUX_CLI_LEVEL 6
449 default 4
450
451 config PCI_IRQ_LEVEL
452 int "PCI interrupt priority"
453 depends on PCI
454 range LINUX_CLI_LEVEL 6
455 default 5
456
457 config ETHERNET_IRQ_LEVEL
458 int "Ethernet interrupt priority"
459 depends on SMC91X || SMC911X || SMSC911X
460 range LINUX_CLI_LEVEL 6
461 default 6
462
463 config EXT_SERIAL_IRQ_LEVEL
464 int "External serial port interrupt priority"
465 depends on SERIAL_8250
466 range LINUX_CLI_LEVEL 6
467 default 6
468
469 endmenu
470
471 source "mm/Kconfig"
472
473 menu "Power management options"
474 source kernel/power/Kconfig
475 endmenu
476
477 endmenu
478
479
480 menu "Executable formats"
481
482 source "fs/Kconfig.binfmt"
483
484 endmenu
485
486 source "net/Kconfig"
487
488 source "drivers/Kconfig"
489
490 source "fs/Kconfig"
491
492 source "arch/mn10300/Kconfig.debug"
493
494 source "security/Kconfig"
495
496 source "crypto/Kconfig"
497
498 source "lib/Kconfig"