arch/powerpc/boot/dts/fsl/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /include/ "mpc8568si-pre.dtsi"
  13
  14 / {
  15         model = "MPC8568EMDS";
  16         compatible = "MPC8568EMDS", "MPC85xxMDS";
  17
  18         aliases {
  19                 pci0 = &pci0;
  20                 pci1 = &pci1;
  21                 rapidio0 = &rio;
  22         };
  23
  24         memory {
  25                 device_type = "memory";
  26                 reg = <0x0 0x0 0x0 0x0>;
  27         };
  28
  29         lbc: localbus@e0005000 {
  30                 reg = <0x0 0xe0005000 0x0 0x1000>;
  31                 ranges = <0x0 0x0 0xfe000000 0x02000000
  32                           0x1 0x0 0xf8000000 0x00008000
  33                           0x2 0x0 0xf0000000 0x04000000
  34                           0x4 0x0 0xf8008000 0x00008000
  35                           0x5 0x0 0xf8010000 0x00008000>;
  36
  37                 nor@0,0 {
  38                         #address-cells = <1>;
  39                         #size-cells = <1>;
  40                         compatible = "cfi-flash";
  41                         reg = <0x0 0x0 0x02000000>;
  42                         bank-width = <2>;
  43                         device-width = <2>;
  44                 };
  45
  46                 bcsr@1,0 {
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49                         compatible = "fsl,mpc8568mds-bcsr";
  50                         reg = <1 0 0x8000>;
  51                         ranges = <0 1 0 0x8000>;
  52
  53                         bcsr5: gpio-controller@11 {
  54                                 #gpio-cells = <2>;
  55                                 compatible = "fsl,mpc8568mds-bcsr-gpio";
  56                                 reg = <0x5 0x1>;
  57                                 gpio-controller;
  58                         };
  59                 };
  60
  61                 pib@4,0 {
  62                         compatible = "fsl,mpc8568mds-pib";
  63                         reg = <4 0 0x8000>;
  64                 };
  65
  66                 pib@5,0 {
  67                         compatible = "fsl,mpc8568mds-pib";
  68                         reg = <5 0 0x8000>;
  69                 };
  70         };
  71
  72         soc: soc8568@e0000000 {
  73                 ranges = <0x0 0x0 0xe0000000 0x100000>;
  74
  75                 i2c-sleep-nexus {
  76                         i2c@3000 {
  77                                 rtc@68 {
  78                                         compatible = "dallas,ds1374";
  79                                         reg = <0x68>;
  80                                         interrupts = <3 1 0 0>;
  81                                 };
  82                         };
  83                 };
  84
  85                 enet0: ethernet@24000 {
  86                         tbi-handle = <&tbi0>;
  87                         phy-handle = <&phy2>;
  88                 };
  89
  90                 mdio@24520 {
  91                         phy0: ethernet-phy@7 {
  92                                 interrupts = <1 1 0 0>;
  93                                 reg = <0x7>;
  94                         };
  95                         phy1: ethernet-phy@1 {
  96                                 interrupts = <2 1 0 0>;
  97                                 reg = <0x1>;
  98                         };
  99                         phy2: ethernet-phy@2 {
 100                                 interrupts = <1 1 0 0>;
 101                                 reg = <0x2>;
 102                         };
 103                         phy3: ethernet-phy@3 {
 104                                 interrupts = <2 1 0 0>;
 105                                 reg = <0x3>;
 106                         };
 107                         tbi0: tbi-phy@11 {
 108                                 reg = <0x11>;
 109                                 device_type = "tbi-phy";
 110                         };
 111                 };
 112
 113                 enet1: ethernet@25000 {
 114                         tbi-handle = <&tbi1>;
 115                         phy-handle = <&phy3>;
 116                         sleep = <&pmc 0x00000040>;
 117                 };
 118
 119                 mdio@25520 {
 120                         tbi1: tbi-phy@11 {
 121                                 reg = <0x11>;
 122                                 device_type = "tbi-phy";
 123                         };
 124                 };
 125
 126                 par_io@e0100 {
 127                         num-ports = <7>;
 128
 129                         pio1: ucc_pin@1 {
 130                                 pio-map = <
 131                         /* port  pin  dir  open_drain  assignment  has_irq */
 132                                         0x4  0xa  0x1  0x0  0x2  0x0    /* TxD0 */
 133                                         0x4  0x9  0x1  0x0  0x2  0x0    /* TxD1 */
 134                                         0x4  0x8  0x1  0x0  0x2  0x0    /* TxD2 */
 135                                         0x4  0x7  0x1  0x0  0x2  0x0    /* TxD3 */
 136                                         0x4  0x17  0x1  0x0  0x2  0x0   /* TxD4 */
 137                                         0x4  0x16  0x1  0x0  0x2  0x0   /* TxD5 */
 138                                         0x4  0x15  0x1  0x0  0x2  0x0   /* TxD6 */
 139                                         0x4  0x14  0x1  0x0  0x2  0x0   /* TxD7 */
 140                                         0x4  0xf  0x2  0x0  0x2  0x0    /* RxD0 */
 141                                         0x4  0xe  0x2  0x0  0x2  0x0    /* RxD1 */
 142                                         0x4  0xd  0x2  0x0  0x2  0x0    /* RxD2 */
 143                                         0x4  0xc  0x2  0x0  0x2  0x0    /* RxD3 */
 144                                         0x4  0x1d  0x2  0x0  0x2  0x0   /* RxD4 */
 145                                         0x4  0x1c  0x2  0x0  0x2  0x0   /* RxD5 */
 146                                         0x4  0x1b  0x2  0x0  0x2  0x0   /* RxD6 */
 147                                         0x4  0x1a  0x2  0x0  0x2  0x0   /* RxD7 */
 148                                         0x4  0xb  0x1  0x0  0x2  0x0    /* TX_EN */
 149                                         0x4  0x18  0x1  0x0  0x2  0x0   /* TX_ER */
 150                                         0x4  0x10  0x2  0x0  0x2  0x0   /* RX_DV */
 151                                         0x4  0x1e  0x2  0x0  0x2  0x0   /* RX_ER */
 152                                         0x4  0x11  0x2  0x0  0x2  0x0   /* RX_CLK */
 153                                         0x4  0x13  0x1  0x0  0x2  0x0   /* GTX_CLK */
 154                                         0x1  0x1f  0x2  0x0  0x3  0x0>; /* GTX125 */
 155                         };
 156
 157                         pio2: ucc_pin@2 {
 158                                 pio-map = <
 159                         /* port  pin  dir  open_drain  assignment  has_irq */
 160                                         0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
 161                                         0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
 162                                         0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
 163                                         0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
 164                                         0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
 165                                         0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
 166                                         0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
 167                                         0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
 168                                         0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
 169                                         0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
 170                                         0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
 171                                         0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
 172                                         0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
 173                                         0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
 174                                         0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
 175                                         0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
 176                                         0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
 177                                         0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
 178                                         0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
 179                                         0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
 180                                         0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
 181                                         0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
 182                                         0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
 183                                         0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
 184                                         0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 185                         };
 186                 };
 187         };
 188
 189         qe: qe@e0080000 {
 190                 ranges = <0x0 0x0 0xe0080000 0x40000>;
 191                 reg = <0x0 0xe0080000 0x0 0x480>;
 192
 193                 spi@4c0 {
 194                         mode = "cpu";
 195                 };
 196
 197                 spi@500 {
 198                         mode = "cpu";
 199                 };
 200
 201                 enet2: ucc@2000 {
 202                         device_type = "network";
 203                         compatible = "ucc_geth";
 204                         local-mac-address = [ 00 00 00 00 00 00 ];
 205                         rx-clock-name = "none";
 206                         tx-clock-name = "clk16";
 207                         pio-handle = <&pio1>;
 208                         phy-handle = <&phy0>;
 209                         phy-connection-type = "rgmii-id";
 210                 };
 211
 212                 enet3: ucc@3000 {
 213                         device_type = "network";
 214                         compatible = "ucc_geth";
 215                         local-mac-address = [ 00 00 00 00 00 00 ];
 216                         rx-clock-name = "none";
 217                         tx-clock-name = "clk16";
 218                         pio-handle = <&pio2>;
 219                         phy-handle = <&phy1>;
 220                         phy-connection-type = "rgmii-id";
 221                 };
 222
 223                 mdio@2120 {
 224                         #address-cells = <1>;
 225                         #size-cells = <0>;
 226                         reg = <0x2120 0x18>;
 227                         compatible = "fsl,ucc-mdio";
 228
 229                         /* These are the same PHYs as on
 230                          * gianfar's MDIO bus */
 231                         qe_phy0: ethernet-phy@7 {
 232                                 interrupt-parent = <&mpic>;
 233                                 interrupts = <1 1 0 0>;
 234                                 reg = <0x7>;
 235                         };
 236                         qe_phy1: ethernet-phy@1 {
 237                                 interrupt-parent = <&mpic>;
 238                                 interrupts = <2 1 0 0>;
 239                                 reg = <0x1>;
 240                         };
 241                         qe_phy2: ethernet-phy@2 {
 242                                 interrupt-parent = <&mpic>;
 243                                 interrupts = <1 1 0 0>;
 244                                 reg = <0x2>;
 245                         };
 246                         qe_phy3: ethernet-phy@3 {
 247                                 interrupt-parent = <&mpic>;
 248                                 interrupts = <2 1 0 0>;
 249                                 reg = <0x3>;
 250                         };
 251                 };
 252         };
 253
 254         pci0: pci@e0008000 {
 255                 reg = <0x0 0xe0008000 0x0 0x1000>;
 256                 ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
 257                           0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
 258                 clock-frequency = <66666666>;
 259                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 260                 interrupt-map = <
 261                         /* IDSEL 0x12 AD18 */
 262                         0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
 263                         0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
 264                         0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
 265                         0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
 266
 267                         /* IDSEL 0x13 AD19 */
 268                         0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
 269                         0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
 270                         0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
 271                         0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
 272         };
 273
 274         /* PCI Express */
 275         pci1: pcie@e000a000 {
 276                 ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
 277                           0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
 278                 reg = <0x0 0xe000a000 0x0 0x1000>;
 279                 pcie@0 {
 280                         ranges = <0x2000000 0x0 0xa0000000
 281                                   0x2000000 0x0 0xa0000000
 282                                   0x0 0x10000000
 283
 284                                   0x1000000 0x0 0x0
 285                                   0x1000000 0x0 0x0
 286                                   0x0 0x800000>;
 287                 };
 288         };
 289
 290         rio: rapidio@e00c00000 {
 291                 reg = <0x0 0xe00c0000 0x0 0x20000>;
 292                 port1 {
 293                         ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
 294                 };
 295         };
 296
 297         leds {
 298                 compatible = "gpio-leds";
 299
 300                 green {
 301                         gpios = <&bcsr5 1 0>;
 302                 };
 303
 304                 amber {
 305                         gpios = <&bcsr5 2 0>;
 306                 };
 307
 308                 red {
 309                         gpios = <&bcsr5 3 0>;
 310                 };
 311         };
 312 };
 313
 314 /include/ "mpc8568si-post.dtsi"