arch/powerpc/boot/dts/fsl/mvme2500.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Device tree source for the Emerson/Artesyn MVME2500
   4  *
   5  * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
   6  *
   7  * Based on: P2020 DS Device Tree Source
   8  * Copyright 2009 Freescale Semiconductor Inc.
   9  */
  10
  11 /include/ "p2020si-pre.dtsi"
  12
  13 / {
  14         model = "MVME2500";
  15         compatible = "artesyn,MVME2500";
  16
  17         aliases {
  18                 serial2 = &serial2;
  19                 serial3 = &serial3;
  20                 serial4 = &serial4;
  21                 serial5 = &serial5;
  22         };
  23
  24         memory {
  25                 device_type = "memory";
  26         };
  27
  28         soc: soc@ffe00000 {
  29                 ranges = <0x0 0 0xffe00000 0x100000>;
  30
  31                 i2c@3000 {
  32                         hwmon@4c {
  33                                 compatible = "adi,adt7461";
  34                                 reg = <0x4c>;
  35                         };
  36
  37                         rtc@68 {
  38                                 compatible = "dallas,ds1337";
  39                                 reg = <0x68>;
  40                                 interrupts = <8 1 0 0>;
  41                         };
  42
  43                         eeprom@54 {
  44                                 compatible = "atmel,24c64";
  45                                 reg = <0x54>;
  46                         };
  47
  48                         eeprom@52 {
  49                                 compatible = "atmel,24c512";
  50                                 reg = <0x52>;
  51                         };
  52
  53                         eeprom@53 {
  54                                 compatible = "atmel,24c512";
  55                                 reg = <0x53>;
  56                         };
  57
  58                         eeprom@50 {
  59                                 compatible = "atmel,24c02";
  60                                 reg = <0x50>;
  61                         };
  62
  63                 };
  64
  65                 spi0: spi@7000 {
  66                         fsl,espi-num-chipselects = <2>;
  67
  68                         flash@0 {
  69                                 compatible = "atmel,at25df641", "jedec,spi-nor";
  70                                 reg = <0>;
  71                                 spi-max-frequency = <10000000>;
  72                         };
  73                         flash@1 {
  74                                 compatible = "atmel,at25df641", "jedec,spi-nor";
  75                                 reg = <1>;
  76                                 spi-max-frequency = <10000000>;
  77                         };
  78                 };
  79
  80                 usb@22000 {
  81                         dr_mode = "host";
  82                         phy_type = "ulpi";
  83                 };
  84
  85                 enet0: ethernet@24000 {
  86                         tbi-handle = <&tbi0>;
  87                         phy-handle = <&phy1>;
  88                         phy-connection-type = "rgmii-id";
  89                 };
  90
  91                 mdio@24520 {
  92                         phy1: ethernet-phy@1 {
  93                                 compatible = "brcm,bcm54616S";
  94                                 interrupts = <6 1 0 0>;
  95                                 reg = <0x1>;
  96                         };
  97
  98                         phy2: ethernet-phy@2 {
  99                                 compatible = "brcm,bcm54616S";
 100                                 interrupts = <6 1 0 0>;
 101                                 reg = <0x2>;
 102                         };
 103
 104                         phy3: ethernet-phy@3 {
 105                                 compatible = "brcm,bcm54616S";
 106                                 interrupts = <5 1 0 0>;
 107                                 reg = <0x3>;
 108                         };
 109
 110                         phy7: ethernet-phy@7 {
 111                                 compatible = "brcm,bcm54616S";
 112                                 interrupts = <7 1 0 0>;
 113                                 reg = <0x7>;
 114                         };
 115
 116                         tbi0: tbi-phy@11 {
 117                                 reg = <0x11>;
 118                                 device_type = "tbi-phy";
 119                         };
 120                 };
 121
 122                 enet1: ethernet@25000 {
 123                         tbi-handle = <&tbi1>;
 124                         phy-handle = <&phy7>;
 125                         phy-connection-type = "rgmii-id";
 126                 };
 127
 128                 mdio@25520 {
 129                         tbi1: tbi-phy@11 {
 130                                 reg = <0x11>;
 131                                 device_type = "tbi-phy";
 132                         };
 133                 };
 134
 135                 enet2: ethernet@26000 {
 136                         tbi-handle = <&tbi2>;
 137                         phy-handle = <&phy3>;
 138                         phy-connection-type = "rgmii-id";
 139                 };
 140
 141                 mdio@26520 {
 142                         tbi2: tbi-phy@11 {
 143                                 reg = <0x11>;
 144                                 device_type = "tbi-phy";
 145                         };
 146                 };
 147         };
 148
 149         lbc: localbus@ffe05000 {
 150                 reg = <0 0xffe05000 0 0x1000>;
 151
 152                 ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
 153                           0x1 0x0 0x0 0xffc40000 0x00010000
 154                           0x2 0x0 0x0 0xffc50000 0x00010000
 155                           0x3 0x0 0x0 0xffc60000 0x00010000
 156                           0x4 0x0 0x0 0xffc70000 0x00010000
 157                           0x6 0x0 0x0 0xffc80000 0x00010000
 158                           0x5 0x0 0x0 0xffdf0000 0x00008000>;
 159
 160                 serial2: serial@1,0 {
 161                         device_type = "serial";
 162                         compatible = "ns16550";
 163                         reg = <0x1 0x0 0x100>;
 164                         clock-frequency = <1843200>;
 165                         interrupts = <11 2 0 0>;
 166                 };
 167
 168                 serial3: serial@2,0 {
 169                         device_type = "serial";
 170                         compatible = "ns16550";
 171                         reg = <0x2 0x0 0x100>;
 172                         clock-frequency = <1843200>;
 173                         interrupts = <1 2 0 0>;
 174                 };
 175
 176                 serial4: serial@3,0 {
 177                         device_type = "serial";
 178                         compatible = "ns16550";
 179                         reg = <0x3 0x0 0x100>;
 180                         clock-frequency = <1843200>;
 181                         interrupts = <2 2 0 0>;
 182                 };
 183
 184                 serial5: serial@4,0 {
 185                         device_type = "serial";
 186                         compatible = "ns16550";
 187                         reg = <0x4 0x0 0x100>;
 188                         clock-frequency = <1843200>;
 189                         interrupts = <3 2 0 0>;
 190                 };
 191
 192                 mram@0,0 {
 193                         compatible = "everspin,mram", "mtd-ram";
 194                         reg = <0x0 0x0 0x80000>;
 195                         bank-width = <2>;
 196                 };
 197
 198                 board-control@5,0 {
 199                         compatible = "artesyn,mvme2500-fpga";
 200                         reg = <0x5 0x0 0x01000>;
 201                 };
 202
 203                 cpld@6,0 {
 204                         compatible = "artesyn,mvme2500-cpld";
 205                         reg = <0x6 0x0 0x10000>;
 206                         interrupts = <9 1 0 0>;
 207                 };
 208         };
 209
 210         pci0: pcie@ffe08000 {
 211                 reg = <0 0xffe08000 0 0x1000>;
 212                 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 213                           0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 214                 pcie@0 {
 215                         ranges = <0x2000000 0x0 0x80000000
 216                                   0x2000000 0x0 0x80000000
 217                                   0x0 0x20000000
 218
 219                                   0x1000000 0x0 0x0
 220                                   0x1000000 0x0 0x0
 221                                   0x0 0x10000>;
 222                 };
 223         };
 224
 225         pci1: pcie@ffe09000 {
 226                 reg = <0 0xffe09000 0 0x1000>;
 227                 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 228                           0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 229                 pcie@0 {
 230                         ranges = <0x2000000 0x0 0xa0000000
 231                                   0x2000000 0x0 0xa0000000
 232                                   0x0 0x20000000
 233
 234                                   0x1000000 0x0 0x0
 235                                   0x1000000 0x0 0x0
 236                                   0x0 0x10000>;
 237                 };
 238
 239         };
 240
 241         pci2: pcie@ffe0a000 {
 242                 reg = <0 0xffe0a000 0 0x1000>;
 243                 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 244                           0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
 245                 pcie@0 {
 246                         ranges = <0x2000000 0x0 0xc0000000
 247                                   0x2000000 0x0 0xc0000000
 248                                   0x0 0x20000000
 249
 250                                   0x1000000 0x0 0x0
 251                                   0x1000000 0x0 0x0
 252                                   0x0 0x10000>;
 253                 };
 254         };
 255 };
 256
 257 /include/ "p2020si-post.dtsi"
 258
 259 / {
 260         soc@ffe00000 {
 261                 serial@4600 {
 262                         status = "disabled";
 263                 };
 264
 265                 i2c@3100 {
 266                         status = "disabled";
 267                 };
 268
 269                 sdhc@2e000 {
 270                         compatible = "fsl,p2020-esdhc", "fsl,esdhc";
 271                         non-removable;
 272                 };
 273
 274         };
 275
 276 };