arch/powerpc/boot/dts/fsl/ppa8548.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * PPA8548 Device Tree Source (36-bit address map)
   4  * Copyright 2013 Prodrive B.V.
   5  *
   6  * Based on:
   7  * MPC8548 CDS Device Tree Source (36-bit address map)
   8  * Copyright 2012 Freescale Semiconductor Inc.
   9  */
  10
  11 /include/ "mpc8548si-pre.dtsi"
  12
  13 / {
  14         model = "ppa8548";
  15         compatible = "ppa8548";
  16         #address-cells = <2>;
  17         #size-cells = <2>;
  18         interrupt-parent = <&mpic>;
  19
  20         memory {
  21                 device_type = "memory";
  22                 reg = <0 0 0x0 0x40000000>;
  23         };
  24
  25         lbc: localbus@fe0005000 {
  26                 reg = <0xf 0xe0005000 0 0x1000>;
  27                 ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
  28         };
  29
  30         soc: soc8548@fe0000000 {
  31                 ranges = <0 0xf 0xe0000000 0x100000>;
  32         };
  33
  34         pci0: pci@fe0008000 {
  35                 /* ppa8548 board doesn't support PCI */
  36                 status = "disabled";
  37         };
  38
  39         pci1: pci@fe0009000 {
  40                 /* ppa8548 board doesn't support PCI */
  41                 status = "disabled";
  42         };
  43
  44         pci2: pcie@fe000a000 {
  45                 /* ppa8548 board doesn't support PCI */
  46                 status = "disabled";
  47         };
  48
  49         rio: rapidio@fe00c0000 {
  50                 reg = <0xf 0xe00c0000 0x0 0x11000>;
  51                 port1 {
  52                         ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
  53                 };
  54         };
  55 };
  56
  57 &lbc {
  58         nor@0 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 compatible = "cfi-flash";
  62                 reg = <0x0 0x0 0x00800000>;
  63                 bank-width = <2>;
  64                 device-width = <2>;
  65
  66                 partition@0 {
  67                         reg = <0x0 0x7A0000>;
  68                         label = "user";
  69                 };
  70
  71                 partition@7A0000 {
  72                         reg = <0x7A0000 0x20000>;
  73                         label = "env";
  74                         read-only;
  75                 };
  76
  77                 partition@7C0000 {
  78                         reg = <0x7C0000 0x40000>;
  79                         label = "u-boot";
  80                         read-only;
  81                 };
  82         };
  83 };
  84
  85 &soc {
  86         i2c@3000 {
  87                 rtc@6f {
  88                         compatible = "intersil,isl1208";
  89                         reg = <0x6f>;
  90                 };
  91         };
  92
  93         i2c@3100 {
  94         };
  95
  96         /*
  97          * Only ethernet controller @25000 and @26000 are used.
  98          * Use alias enet2 and enet3 for the remainig controllers,
  99          * to stay compatible with mpc8548si-pre.dtsi.
 100          */
 101         enet2: ethernet@24000 {
 102                 status = "disabled";
 103         };
 104
 105         mdio@24520 {
 106                 phy0: ethernet-phy@0 {
 107                         interrupts = <7 1 0 0>;
 108                         reg = <0x0>;
 109                 };
 110                 phy1: ethernet-phy@1 {
 111                         interrupts = <8 1 0 0>;
 112                         reg = <0x1>;
 113                 };
 114                 tbi0: tbi-phy@11 {
 115                         reg = <0x11>;
 116                         device_type = "tbi-phy";
 117                 };
 118         };
 119
 120         enet0: ethernet@25000 {
 121                 tbi-handle = <&tbi1>;
 122                 phy-handle = <&phy0>;
 123         };
 124
 125         mdio@25520 {
 126                 tbi1: tbi-phy@11 {
 127                         reg = <0x11>;
 128                         device_type = "tbi-phy";
 129                 };
 130         };
 131
 132         enet1: ethernet@26000 {
 133                 tbi-handle = <&tbi2>;
 134                 phy-handle = <&phy1>;
 135         };
 136
 137         mdio@26520 {
 138                 tbi2: tbi-phy@11 {
 139                         reg = <0x11>;
 140                         device_type = "tbi-phy";
 141                 };
 142         };
 143
 144         enet3: ethernet@27000 {
 145                 status = "disabled";
 146         };
 147
 148         mdio@27520 {
 149                 tbi3: tbi-phy@11 {
 150                         reg = <0x11>;
 151                         device_type = "tbi-phy";
 152                 };
 153         };
 154
 155         crypto@30000 {
 156                 status = "disabled";
 157         };
 158 };
 159
 160 /include/ "mpc8548si-post.dtsi"