arch/powerpc/boot/dts/motionpro.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Motion-PRO board Device Tree Source
   4  *
   5  * Copyright (C) 2007 Semihalf
   6  * Marian Balakowicz <m8@semihalf.com>
   7  */
   8
   9 /include/ "mpc5200b.dtsi"
  10
  11 &gpt0 { fsl,has-wdt; };
  12 &gpt6 { // Motion-PRO status LED
  13         compatible = "promess,motionpro-led";
  14         label = "motionpro-statusled";
  15         blink-delay = <100>; // 100 msec
  16 };
  17 &gpt7 { // Motion-PRO ready LED
  18         compatible = "promess,motionpro-led";
  19         label = "motionpro-readyled";
  20 };
  21
  22 / {
  23         model = "promess,motionpro";
  24         compatible = "promess,motionpro";
  25
  26         soc5200@f0000000 {
  27                 can@900 {
  28                         status = "disabled";
  29                 };
  30
  31                 psc@2000 {              // PSC1
  32                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  33                 };
  34
  35                 // PSC2 in spi master mode
  36                 psc@2200 {              // PSC2
  37                         compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
  38                         cell-index = <1>;
  39                 };
  40
  41                 psc@2400 {              // PSC3
  42                         status = "disabled";
  43                 };
  44
  45                 psc@2600 {              // PSC4
  46                         status = "disabled";
  47                 };
  48
  49                 psc@2800 {              // PSC5
  50                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  51                 };
  52
  53                 psc@2c00 {              // PSC6
  54                         status = "disabled";
  55                 };
  56
  57                 ethernet@3000 {
  58                         phy-handle = <&phy0>;
  59                 };
  60
  61                 mdio@3000 {
  62                         phy0: ethernet-phy@2 {
  63                                 reg = <2>;
  64                         };
  65                 };
  66
  67                 i2c@3d00 {
  68                         status = "disabled";
  69                 };
  70
  71                 i2c@3d40 {
  72                         rtc@68 {
  73                                 compatible = "dallas,ds1339";
  74                                 reg = <0x68>;
  75                         };
  76                 };
  77
  78                 sram@8000 {
  79                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
  80                         reg = <0x8000 0x4000>;
  81                 };
  82         };
  83
  84         pci@f0000d00 {
  85                 status = "disabled";
  86         };
  87
  88         localbus {
  89                 ranges = <0 0 0xff000000 0x01000000
  90                           1 0 0x50000000 0x00010000
  91                           2 0 0x50010000 0x00010000
  92                           3 0 0x50020000 0x00010000>;
  93
  94                 // 8-bit DualPort SRAM on LocalPlus Bus CS1
  95                 kollmorgen@1,0 {
  96                         compatible = "promess,motionpro-kollmorgen";
  97                         reg = <1 0 0x10000>;
  98                         interrupts = <1 1 0>;
  99                 };
 100
 101                 // 8-bit board CPLD on LocalPlus Bus CS2
 102                 cpld@2,0 {
 103                         compatible = "promess,motionpro-cpld";
 104                         reg = <2 0 0x10000>;
 105                 };
 106
 107                 // 8-bit custom Anybus Module on LocalPlus Bus CS3
 108                 anybus@3,0 {
 109                         compatible = "promess,motionpro-anybus";
 110                         reg = <3 0 0x10000>;
 111                 };
 112                 pro_module_general@3,0 {
 113                         compatible = "promess,pro_module_general";
 114                         reg = <3 0 3>;
 115                 };
 116                 pro_module_dio@3,800 {
 117                         compatible = "promess,pro_module_dio";
 118                         reg = <3 0x800 2>;
 119                 };
 120
 121                 // 16-bit flash device at LocalPlus Bus CS0
 122                 flash@0,0 {
 123                         compatible = "cfi-flash";
 124                         reg = <0 0 0x01000000>;
 125                         bank-width = <2>;
 126                         device-width = <2>;
 127                         #size-cells = <1>;
 128                         #address-cells = <1>;
 129                 };
 130
 131         };
 132 };