]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - arch/powerpc/boot/dts/mpc8315erdb.dts
projects / mirror_ubuntu-jammy-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
timekeeping: Repair ktime_get_coarse*() granularity
[mirror_ubuntu-jammy-kernel.git] / arch / powerpc / boot / dts / mpc8315erdb.dts
1 /*
2 * MPC8315E RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12 /dts-v1/;
13
14 / {
15 compatible = "fsl,mpc8315erdb";
16 #address-cells = <1>;
17 #size-cells = <1>;
18
19 aliases {
20 ethernet0 = &enet0;
21 ethernet1 = &enet1;
22 serial0 = &serial0;
23 serial1 = &serial1;
24 pci0 = &pci0;
25 pci1 = &pci1;
26 pci2 = &pci2;
27 };
28
29 cpus {
30 #address-cells = <1>;
31 #size-cells = <0>;
32
33 PowerPC,8315@0 {
34 device_type = "cpu";
35 reg = <0x0>;
36 d-cache-line-size = <32>;
37 i-cache-line-size = <32>;
38 d-cache-size = <16384>;
39 i-cache-size = <16384>;
40 timebase-frequency = <0>; // from bootloader
41 bus-frequency = <0>; // from bootloader
42 clock-frequency = <0>; // from bootloader
43 };
44 };
45
46 memory {
47 device_type = "memory";
48 reg = <0x00000000 0x08000000>; // 128MB at 0
49 };
50
51 localbus@e0005000 {
52 #address-cells = <2>;
53 #size-cells = <1>;
54 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
55 reg = <0xe0005000 0x1000>;
56 interrupts = <77 0x8>;
57 interrupt-parent = <&ipic>;
58
59 // CS0 and CS1 are swapped when
60 // booting from nand, but the
61 // addresses are the same.
62 ranges = <0x0 0x0 0xfe000000 0x00800000
63 0x1 0x0 0xe0600000 0x00002000
64 0x2 0x0 0xf0000000 0x00020000
65 0x3 0x0 0xfa000000 0x00008000>;
66
67 flash@0,0 {
68 #address-cells = <1>;
69 #size-cells = <1>;
70 compatible = "cfi-flash";
71 reg = <0x0 0x0 0x800000>;
72 bank-width = <2>;
73 device-width = <1>;
74 };
75
76 nand@1,0 {
77 #address-cells = <1>;
78 #size-cells = <1>;
79 compatible = "fsl,mpc8315-fcm-nand",
80 "fsl,elbc-fcm-nand";
81 reg = <0x1 0x0 0x2000>;
82
83 u-boot@0 {
84 reg = <0x0 0x100000>;
85 read-only;
86 };
87
88 kernel@100000 {
89 reg = <0x100000 0x300000>;
90 };
91 fs@400000 {
92 reg = <0x400000 0x1c00000>;
93 };
94 };
95 };
96
97 immr@e0000000 {
98 #address-cells = <1>;
99 #size-cells = <1>;
100 device_type = "soc";
101 compatible = "fsl,mpc8315-immr", "simple-bus";
102 ranges = <0 0xe0000000 0x00100000>;
103 reg = <0xe0000000 0x00000200>;
104 bus-frequency = <0>;
105
106 wdt@200 {
107 device_type = "watchdog";
108 compatible = "mpc83xx_wdt";
109 reg = <0x200 0x100>;
110 };
111
112 i2c@3000 {
113 #address-cells = <1>;
114 #size-cells = <0>;
115 cell-index = <0>;
116 compatible = "fsl-i2c";
117 reg = <0x3000 0x100>;
118 interrupts = <14 0x8>;
119 interrupt-parent = <&ipic>;
120 dfsrr;
121 rtc@68 {
122 compatible = "dallas,ds1339";
123 reg = <0x68>;
124 };
125
126 mcu_pio: mcu@a {
127 #gpio-cells = <2>;
128 compatible = "fsl,mc9s08qg8-mpc8315erdb",
129 "fsl,mcu-mpc8349emitx";
130 reg = <0x0a>;
131 gpio-controller;
132 };
133 };
134
135 spi@7000 {
136 cell-index = <0>;
137 compatible = "fsl,spi";
138 reg = <0x7000 0x1000>;
139 interrupts = <16 0x8>;
140 interrupt-parent = <&ipic>;
141 mode = "cpu";
142 };
143
144 dma@82a8 {
145 #address-cells = <1>;
146 #size-cells = <1>;
147 compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
148 reg = <0x82a8 4>;
149 ranges = <0 0x8100 0x1a8>;
150 interrupt-parent = <&ipic>;
151 interrupts = <71 8>;
152 cell-index = <0>;
153 dma-channel@0 {
154 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
155 reg = <0 0x80>;
156 cell-index = <0>;
157 interrupt-parent = <&ipic>;
158 interrupts = <71 8>;
159 };
160 dma-channel@80 {
161 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
162 reg = <0x80 0x80>;
163 cell-index = <1>;
164 interrupt-parent = <&ipic>;
165 interrupts = <71 8>;
166 };
167 dma-channel@100 {
168 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
169 reg = <0x100 0x80>;
170 cell-index = <2>;
171 interrupt-parent = <&ipic>;
172 interrupts = <71 8>;
173 };
174 dma-channel@180 {
175 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
176 reg = <0x180 0x28>;
177 cell-index = <3>;
178 interrupt-parent = <&ipic>;
179 interrupts = <71 8>;
180 };
181 };
182
183 usb@23000 {
184 compatible = "fsl-usb2-dr";
185 reg = <0x23000 0x1000>;
186 #address-cells = <1>;
187 #size-cells = <0>;
188 interrupt-parent = <&ipic>;
189 interrupts = <38 0x8>;
190 phy_type = "utmi";
191 };
192
193 enet0: ethernet@24000 {
194 #address-cells = <1>;
195 #size-cells = <1>;
196 cell-index = <0>;
197 device_type = "network";
198 model = "eTSEC";
199 compatible = "gianfar";
200 reg = <0x24000 0x1000>;
201 ranges = <0x0 0x24000 0x1000>;
202 local-mac-address = [ 00 00 00 00 00 00 ];
203 interrupts = <32 0x8 33 0x8 34 0x8>;
204 interrupt-parent = <&ipic>;
205 tbi-handle = <&tbi0>;
206 phy-handle = < &phy0 >;
207 fsl,magic-packet;
208
209 mdio@520 {
210 #address-cells = <1>;
211 #size-cells = <0>;
212 compatible = "fsl,gianfar-mdio";
213 reg = <0x520 0x20>;
214
215 phy0: ethernet-phy@0 {
216 interrupt-parent = <&ipic>;
217 interrupts = <20 0x8>;
218 reg = <0x0>;
219 };
220
221 phy1: ethernet-phy@1 {
222 interrupt-parent = <&ipic>;
223 interrupts = <19 0x8>;
224 reg = <0x1>;
225 };
226
227 tbi0: tbi-phy@11 {
228 reg = <0x11>;
229 device_type = "tbi-phy";
230 };
231 };
232 };
233
234 enet1: ethernet@25000 {
235 #address-cells = <1>;
236 #size-cells = <1>;
237 cell-index = <1>;
238 device_type = "network";
239 model = "eTSEC";
240 compatible = "gianfar";
241 reg = <0x25000 0x1000>;
242 ranges = <0x0 0x25000 0x1000>;
243 local-mac-address = [ 00 00 00 00 00 00 ];
244 interrupts = <35 0x8 36 0x8 37 0x8>;
245 interrupt-parent = <&ipic>;
246 tbi-handle = <&tbi1>;
247 phy-handle = < &phy1 >;
248 fsl,magic-packet;
249
250 mdio@520 {
251 #address-cells = <1>;
252 #size-cells = <0>;
253 compatible = "fsl,gianfar-tbi";
254 reg = <0x520 0x20>;
255
256 tbi1: tbi-phy@11 {
257 reg = <0x11>;
258 device_type = "tbi-phy";
259 };
260 };
261 };
262
263 serial0: serial@4500 {
264 cell-index = <0>;
265 device_type = "serial";
266 compatible = "fsl,ns16550", "ns16550";
267 reg = <0x4500 0x100>;
268 clock-frequency = <133333333>;
269 interrupts = <9 0x8>;
270 interrupt-parent = <&ipic>;
271 };
272
273 serial1: serial@4600 {
274 cell-index = <1>;
275 device_type = "serial";
276 compatible = "fsl,ns16550", "ns16550";
277 reg = <0x4600 0x100>;
278 clock-frequency = <133333333>;
279 interrupts = <10 0x8>;
280 interrupt-parent = <&ipic>;
281 };
282
283 crypto@30000 {
284 compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
285 "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
286 "fsl,sec2.0";
287 reg = <0x30000 0x10000>;
288 interrupts = <11 0x8>;
289 interrupt-parent = <&ipic>;
290 fsl,num-channels = <4>;
291 fsl,channel-fifo-len = <24>;
292 fsl,exec-units-mask = <0x97c>;
293 fsl,descriptor-types-mask = <0x3a30abf>;
294 };
295
296 sata@18000 {
297 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
298 reg = <0x18000 0x1000>;
299 cell-index = <1>;
300 interrupts = <44 0x8>;
301 interrupt-parent = <&ipic>;
302 };
303
304 sata@19000 {
305 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
306 reg = <0x19000 0x1000>;
307 cell-index = <2>;
308 interrupts = <45 0x8>;
309 interrupt-parent = <&ipic>;
310 };
311
312 gtm1: timer@500 {
313 compatible = "fsl,mpc8315-gtm", "fsl,gtm";
314 reg = <0x500 0x100>;
315 interrupts = <90 8 78 8 84 8 72 8>;
316 interrupt-parent = <&ipic>;
317 clock-frequency = <133333333>;
318 };
319
320 timer@600 {
321 compatible = "fsl,mpc8315-gtm", "fsl,gtm";
322 reg = <0x600 0x100>;
323 interrupts = <91 8 79 8 85 8 73 8>;
324 interrupt-parent = <&ipic>;
325 clock-frequency = <133333333>;
326 };
327
328 /* IPIC
329 * interrupts cell = <intr #, sense>
330 * sense values match linux IORESOURCE_IRQ_* defines:
331 * sense == 8: Level, low assertion
332 * sense == 2: Edge, high-to-low change
333 */
334 ipic: interrupt-controller@700 {
335 interrupt-controller;
336 #address-cells = <0>;
337 #interrupt-cells = <2>;
338 reg = <0x700 0x100>;
339 device_type = "ipic";
340 };
341
342 ipic-msi@7c0 {
343 compatible = "fsl,ipic-msi";
344 reg = <0x7c0 0x40>;
345 msi-available-ranges = <0 0x100>;
346 interrupts = <0x43 0x8
347 0x4 0x8
348 0x51 0x8
349 0x52 0x8
350 0x56 0x8
351 0x57 0x8
352 0x58 0x8
353 0x59 0x8>;
354 interrupt-parent = < &ipic >;
355 };
356
357 pmc: power@b00 {
358 compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
359 "fsl,mpc8349-pmc";
360 reg = <0xb00 0x100 0xa00 0x100>;
361 interrupts = <80 8>;
362 interrupt-parent = <&ipic>;
363 fsl,mpc8313-wakeup-timer = <&gtm1>;
364 };
365 };
366
367 pci0: pci@e0008500 {
368 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
369 interrupt-map = <
370 /* IDSEL 0x0E -mini PCI */
371 0x7000 0x0 0x0 0x1 &ipic 18 0x8
372 0x7000 0x0 0x0 0x2 &ipic 18 0x8
373 0x7000 0x0 0x0 0x3 &ipic 18 0x8
374 0x7000 0x0 0x0 0x4 &ipic 18 0x8
375
376 /* IDSEL 0x0F -mini PCI */
377 0x7800 0x0 0x0 0x1 &ipic 17 0x8
378 0x7800 0x0 0x0 0x2 &ipic 17 0x8
379 0x7800 0x0 0x0 0x3 &ipic 17 0x8
380 0x7800 0x0 0x0 0x4 &ipic 17 0x8
381
382 /* IDSEL 0x10 - PCI slot */
383 0x8000 0x0 0x0 0x1 &ipic 48 0x8
384 0x8000 0x0 0x0 0x2 &ipic 17 0x8
385 0x8000 0x0 0x0 0x3 &ipic 48 0x8
386 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
387 interrupt-parent = <&ipic>;
388 interrupts = <66 0x8>;
389 bus-range = <0x0 0x0>;
390 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
391 0x42000000 0 0x80000000 0x80000000 0 0x10000000
392 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
393 clock-frequency = <66666666>;
394 #interrupt-cells = <1>;
395 #size-cells = <2>;
396 #address-cells = <3>;
397 reg = <0xe0008500 0x100 /* internal registers */
398 0xe0008300 0x8>; /* config space access registers */
399 compatible = "fsl,mpc8349-pci";
400 device_type = "pci";
401 };
402
403 pci1: pcie@e0009000 {
404 #address-cells = <3>;
405 #size-cells = <2>;
406 #interrupt-cells = <1>;
407 device_type = "pci";
408 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
409 reg = <0xe0009000 0x00001000>;
410 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
411 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
412 bus-range = <0 255>;
413 interrupt-map-mask = <0xf800 0 0 7>;
414 interrupt-map = <0 0 0 1 &ipic 1 8
415 0 0 0 2 &ipic 1 8
416 0 0 0 3 &ipic 1 8
417 0 0 0 4 &ipic 1 8>;
418 clock-frequency = <0>;
419
420 pcie@0 {
421 #address-cells = <3>;
422 #size-cells = <2>;
423 device_type = "pci";
424 reg = <0 0 0 0 0>;
425 ranges = <0x02000000 0 0xa0000000
426 0x02000000 0 0xa0000000
427 0 0x10000000
428 0x01000000 0 0x00000000
429 0x01000000 0 0x00000000
430 0 0x00800000>;
431 };
432 };
433
434 pci2: pcie@e000a000 {
435 #address-cells = <3>;
436 #size-cells = <2>;
437 #interrupt-cells = <1>;
438 device_type = "pci";
439 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
440 reg = <0xe000a000 0x00001000>;
441 ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
442 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
443 bus-range = <0 255>;
444 interrupt-map-mask = <0xf800 0 0 7>;
445 interrupt-map = <0 0 0 1 &ipic 2 8
446 0 0 0 2 &ipic 2 8
447 0 0 0 3 &ipic 2 8
448 0 0 0 4 &ipic 2 8>;
449 clock-frequency = <0>;
450
451 pcie@0 {
452 #address-cells = <3>;
453 #size-cells = <2>;
454 device_type = "pci";
455 reg = <0 0 0 0 0>;
456 ranges = <0x02000000 0 0xc0000000
457 0x02000000 0 0xc0000000
458 0 0x10000000
459 0x01000000 0 0x00000000
460 0x01000000 0 0x00000000
461 0 0x00800000>;
462 };
463 };
464
465 leds {
466 compatible = "gpio-leds";
467
468 pwr {
469 gpios = <&mcu_pio 0 0>;
470 default-state = "on";
471 };
472
473 hdd {
474 gpios = <&mcu_pio 1 0>;
475 linux,default-trigger = "disk-activity";
476 };
477 };
478 };
Ubuntu Jammy Linux kernel mirror