arch/powerpc/boot/dts/mpc8378_rdb.dts

   1 /*
   2  * MPC8378E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8378rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25                 pci1 = &pci1;
  26                 pci2 = &pci2;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 PowerPC,8378@0 {
  34                         device_type = "cpu";
  35                         reg = <0x0>;
  36                         d-cache-line-size = <32>;
  37                         i-cache-line-size = <32>;
  38                         d-cache-size = <32768>;
  39                         i-cache-size = <32768>;
  40                         timebase-frequency = <0>;
  41                         bus-frequency = <0>;
  42                         clock-frequency = <0>;
  43                 };
  44         };
  45
  46         memory {
  47                 device_type = "memory";
  48                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  49         };
  50
  51         localbus@e0005000 {
  52                 #address-cells = <2>;
  53                 #size-cells = <1>;
  54                 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
  55                 reg = <0xe0005000 0x1000>;
  56                 interrupts = <77 0x8>;
  57                 interrupt-parent = <&ipic>;
  58
  59                 // CS0 and CS1 are swapped when
  60                 // booting from nand, but the
  61                 // addresses are the same.
  62                 ranges = <0x0 0x0 0xfe000000 0x00800000
  63                           0x1 0x0 0xe0600000 0x00008000
  64                           0x2 0x0 0xf0000000 0x00020000
  65                           0x3 0x0 0xfa000000 0x00008000>;
  66
  67                 flash@0,0 {
  68                         #address-cells = <1>;
  69                         #size-cells = <1>;
  70                         compatible = "cfi-flash";
  71                         reg = <0x0 0x0 0x800000>;
  72                         bank-width = <2>;
  73                         device-width = <1>;
  74                 };
  75
  76                 nand@1,0 {
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79                         compatible = "fsl,mpc8378-fcm-nand",
  80                                      "fsl,elbc-fcm-nand";
  81                         reg = <0x1 0x0 0x8000>;
  82
  83                         u-boot@0 {
  84                                 reg = <0x0 0x100000>;
  85                                 read-only;
  86                         };
  87
  88                         kernel@100000 {
  89                                 reg = <0x100000 0x300000>;
  90                         };
  91                         fs@400000 {
  92                                 reg = <0x400000 0x1c00000>;
  93                         };
  94                 };
  95         };
  96
  97         immr@e0000000 {
  98                 #address-cells = <1>;
  99                 #size-cells = <1>;
 100                 device_type = "soc";
 101                 compatible = "simple-bus";
 102                 ranges = <0x0 0xe0000000 0x00100000>;
 103                 reg = <0xe0000000 0x00000200>;
 104                 bus-frequency = <0>;
 105
 106                 wdt@200 {
 107                         device_type = "watchdog";
 108                         compatible = "mpc83xx_wdt";
 109                         reg = <0x200 0x100>;
 110                 };
 111
 112                 gpio1: gpio-controller@c00 {
 113                         #gpio-cells = <2>;
 114                         compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
 115                         reg = <0xc00 0x100>;
 116                         interrupts = <74 0x8>;
 117                         interrupt-parent = <&ipic>;
 118                         gpio-controller;
 119                 };
 120
 121                 gpio2: gpio-controller@d00 {
 122                         #gpio-cells = <2>;
 123                         compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
 124                         reg = <0xd00 0x100>;
 125                         interrupts = <75 0x8>;
 126                         interrupt-parent = <&ipic>;
 127                         gpio-controller;
 128                 };
 129
 130                 sleep-nexus {
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133                         compatible = "simple-bus";
 134                         sleep = <&pmc 0x0c000000>;
 135                         ranges;
 136
 137                         i2c@3000 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 cell-index = <0>;
 141                                 compatible = "fsl-i2c";
 142                                 reg = <0x3000 0x100>;
 143                                 interrupts = <14 0x8>;
 144                                 interrupt-parent = <&ipic>;
 145                                 dfsrr;
 146
 147                                 dtt@48 {
 148                                         compatible = "national,lm75";
 149                                         reg = <0x48>;
 150                                 };
 151
 152                                 at24@50 {
 153                                         compatible = "at24,24c256";
 154                                         reg = <0x50>;
 155                                 };
 156
 157                                 rtc@68 {
 158                                         compatible = "dallas,ds1339";
 159                                         reg = <0x68>;
 160                                 };
 161
 162                                 mcu_pio: mcu@a {
 163                                         #gpio-cells = <2>;
 164                                         compatible = "fsl,mc9s08qg8-mpc8378erdb",
 165                                                      "fsl,mcu-mpc8349emitx";
 166                                         reg = <0x0a>;
 167                                         gpio-controller;
 168                                 };
 169                         };
 170
 171                         sdhci@2e000 {
 172                                 compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
 173                                 reg = <0x2e000 0x1000>;
 174                                 interrupts = <42 0x8>;
 175                                 interrupt-parent = <&ipic>;
 176                                 /* Filled in by U-Boot */
 177                                 clock-frequency = <0>;
 178                         };
 179                 };
 180
 181                 i2c@3100 {
 182                         #address-cells = <1>;
 183                         #size-cells = <0>;
 184                         cell-index = <1>;
 185                         compatible = "fsl-i2c";
 186                         reg = <0x3100 0x100>;
 187                         interrupts = <15 0x8>;
 188                         interrupt-parent = <&ipic>;
 189                         dfsrr;
 190                 };
 191
 192                 spi@7000 {
 193                         cell-index = <0>;
 194                         compatible = "fsl,spi";
 195                         reg = <0x7000 0x1000>;
 196                         interrupts = <16 0x8>;
 197                         interrupt-parent = <&ipic>;
 198                         mode = "cpu";
 199                 };
 200
 201                 dma@82a8 {
 202                         #address-cells = <1>;
 203                         #size-cells = <1>;
 204                         compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
 205                         reg = <0x82a8 4>;
 206                         ranges = <0 0x8100 0x1a8>;
 207                         interrupt-parent = <&ipic>;
 208                         interrupts = <71 8>;
 209                         cell-index = <0>;
 210                         dma-channel@0 {
 211                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 212                                 reg = <0 0x80>;
 213                                 cell-index = <0>;
 214                                 interrupt-parent = <&ipic>;
 215                                 interrupts = <71 8>;
 216                         };
 217                         dma-channel@80 {
 218                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 219                                 reg = <0x80 0x80>;
 220                                 cell-index = <1>;
 221                                 interrupt-parent = <&ipic>;
 222                                 interrupts = <71 8>;
 223                         };
 224                         dma-channel@100 {
 225                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 226                                 reg = <0x100 0x80>;
 227                                 cell-index = <2>;
 228                                 interrupt-parent = <&ipic>;
 229                                 interrupts = <71 8>;
 230                         };
 231                         dma-channel@180 {
 232                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
 233                                 reg = <0x180 0x28>;
 234                                 cell-index = <3>;
 235                                 interrupt-parent = <&ipic>;
 236                                 interrupts = <71 8>;
 237                         };
 238                 };
 239
 240                 usb@23000 {
 241                         compatible = "fsl-usb2-dr";
 242                         reg = <0x23000 0x1000>;
 243                         #address-cells = <1>;
 244                         #size-cells = <0>;
 245                         interrupt-parent = <&ipic>;
 246                         interrupts = <38 0x8>;
 247                         phy_type = "ulpi";
 248                         sleep = <&pmc 0x00c00000>;
 249                 };
 250
 251                 enet0: ethernet@24000 {
 252                         #address-cells = <1>;
 253                         #size-cells = <1>;
 254                         cell-index = <0>;
 255                         device_type = "network";
 256                         model = "eTSEC";
 257                         compatible = "gianfar";
 258                         reg = <0x24000 0x1000>;
 259                         ranges = <0x0 0x24000 0x1000>;
 260                         local-mac-address = [ 00 00 00 00 00 00 ];
 261                         interrupts = <32 0x8 33 0x8 34 0x8>;
 262                         phy-connection-type = "mii";
 263                         interrupt-parent = <&ipic>;
 264                         tbi-handle = <&tbi0>;
 265                         phy-handle = <&phy2>;
 266                         sleep = <&pmc 0xc0000000>;
 267                         fsl,magic-packet;
 268
 269                         mdio@520 {
 270                                 #address-cells = <1>;
 271                                 #size-cells = <0>;
 272                                 compatible = "fsl,gianfar-mdio";
 273                                 reg = <0x520 0x20>;
 274
 275                                 phy2: ethernet-phy@2 {
 276                                         interrupt-parent = <&ipic>;
 277                                         interrupts = <17 0x8>;
 278                                         reg = <0x2>;
 279                                         device_type = "ethernet-phy";
 280                                 };
 281
 282                                 tbi0: tbi-phy@11 {
 283                                         reg = <0x11>;
 284                                         device_type = "tbi-phy";
 285                                 };
 286                         };
 287                 };
 288
 289                 enet1: ethernet@25000 {
 290                         #address-cells = <1>;
 291                         #size-cells = <1>;
 292                         cell-index = <1>;
 293                         device_type = "network";
 294                         model = "eTSEC";
 295                         compatible = "gianfar";
 296                         reg = <0x25000 0x1000>;
 297                         ranges = <0x0 0x25000 0x1000>;
 298                         local-mac-address = [ 00 00 00 00 00 00 ];
 299                         interrupts = <35 0x8 36 0x8 37 0x8>;
 300                         phy-connection-type = "mii";
 301                         interrupt-parent = <&ipic>;
 302                         fixed-link = <1 1 1000 0 0>;
 303                         tbi-handle = <&tbi1>;
 304                         sleep = <&pmc 0x30000000>;
 305                         fsl,magic-packet;
 306
 307                         mdio@520 {
 308                                 #address-cells = <1>;
 309                                 #size-cells = <0>;
 310                                 compatible = "fsl,gianfar-tbi";
 311                                 reg = <0x520 0x20>;
 312
 313                                 tbi1: tbi-phy@11 {
 314                                         reg = <0x11>;
 315                                         device_type = "tbi-phy";
 316                                 };
 317                         };
 318                 };
 319
 320                 serial0: serial@4500 {
 321                         cell-index = <0>;
 322                         device_type = "serial";
 323                         compatible = "ns16550";
 324                         reg = <0x4500 0x100>;
 325                         clock-frequency = <0>;
 326                         interrupts = <9 0x8>;
 327                         interrupt-parent = <&ipic>;
 328                 };
 329
 330                 serial1: serial@4600 {
 331                         cell-index = <1>;
 332                         device_type = "serial";
 333                         compatible = "ns16550";
 334                         reg = <0x4600 0x100>;
 335                         clock-frequency = <0>;
 336                         interrupts = <10 0x8>;
 337                         interrupt-parent = <&ipic>;
 338                 };
 339
 340                 crypto@30000 {
 341                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 342                                      "fsl,sec2.1", "fsl,sec2.0";
 343                         reg = <0x30000 0x10000>;
 344                         interrupts = <11 0x8>;
 345                         interrupt-parent = <&ipic>;
 346                         fsl,num-channels = <4>;
 347                         fsl,channel-fifo-len = <24>;
 348                         fsl,exec-units-mask = <0x9fe>;
 349                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 350                         sleep = <&pmc 0x03000000>;
 351                 };
 352
 353                 /* IPIC
 354                  * interrupts cell = <intr #, sense>
 355                  * sense values match linux IORESOURCE_IRQ_* defines:
 356                  * sense == 8: Level, low assertion
 357                  * sense == 2: Edge, high-to-low change
 358                  */
 359                 ipic: interrupt-controller@700 {
 360                         compatible = "fsl,ipic";
 361                         interrupt-controller;
 362                         #address-cells = <0>;
 363                         #interrupt-cells = <2>;
 364                         reg = <0x700 0x100>;
 365                 };
 366
 367                 pmc: power@b00 {
 368                         compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
 369                         reg = <0xb00 0x100 0xa00 0x100>;
 370                         interrupts = <80 0x8>;
 371                         interrupt-parent = <&ipic>;
 372                 };
 373         };
 374
 375         pci0: pci@e0008500 {
 376                 interrupt-map-mask = <0xf800 0 0 7>;
 377                 interrupt-map = <
 378                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 379
 380                                 /* IDSEL AD14 IRQ6 inta */
 381                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 382
 383                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 384                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 385                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 386                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 387
 388                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 389                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 390                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 391                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 392                 interrupt-parent = <&ipic>;
 393                 interrupts = <66 0x8>;
 394                 bus-range = <0 0>;
 395                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 396                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 397                           0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 398                 sleep = <&pmc 0x00010000>;
 399                 clock-frequency = <66666666>;
 400                 #interrupt-cells = <1>;
 401                 #size-cells = <2>;
 402                 #address-cells = <3>;
 403                 reg = <0xe0008500 0x100         /* internal registers */
 404                        0xe0008300 0x8>;         /* config space access registers */
 405                 compatible = "fsl,mpc8349-pci";
 406                 device_type = "pci";
 407         };
 408
 409         pci1: pcie@e0009000 {
 410                 #address-cells = <3>;
 411                 #size-cells = <2>;
 412                 #interrupt-cells = <1>;
 413                 device_type = "pci";
 414                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 415                 reg = <0xe0009000 0x00001000>;
 416                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
 417                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
 418                 bus-range = <0 255>;
 419                 interrupt-map-mask = <0xf800 0 0 7>;
 420                 interrupt-map = <0 0 0 1 &ipic 1 8
 421                                  0 0 0 2 &ipic 1 8
 422                                  0 0 0 3 &ipic 1 8
 423                                  0 0 0 4 &ipic 1 8>;
 424                 sleep = <&pmc 0x00300000>;
 425                 clock-frequency = <0>;
 426
 427                 pcie@0 {
 428                         #address-cells = <3>;
 429                         #size-cells = <2>;
 430                         device_type = "pci";
 431                         reg = <0 0 0 0 0>;
 432                         ranges = <0x02000000 0 0xa8000000
 433                                   0x02000000 0 0xa8000000
 434                                   0 0x10000000
 435                                   0x01000000 0 0x00000000
 436                                   0x01000000 0 0x00000000
 437                                   0 0x00800000>;
 438                 };
 439         };
 440
 441         pci2: pcie@e000a000 {
 442                 #address-cells = <3>;
 443                 #size-cells = <2>;
 444                 #interrupt-cells = <1>;
 445                 device_type = "pci";
 446                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
 447                 reg = <0xe000a000 0x00001000>;
 448                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
 449                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
 450                 bus-range = <0 255>;
 451                 interrupt-map-mask = <0xf800 0 0 7>;
 452                 interrupt-map = <0 0 0 1 &ipic 2 8
 453                                  0 0 0 2 &ipic 2 8
 454                                  0 0 0 3 &ipic 2 8
 455                                  0 0 0 4 &ipic 2 8>;
 456                 sleep = <&pmc 0x000c0000>;
 457                 clock-frequency = <0>;
 458
 459                 pcie@0 {
 460                         #address-cells = <3>;
 461                         #size-cells = <2>;
 462                         device_type = "pci";
 463                         reg = <0 0 0 0 0>;
 464                         ranges = <0x02000000 0 0xc8000000
 465                                   0x02000000 0 0xc8000000
 466                                   0 0x10000000
 467                                   0x01000000 0 0x00000000
 468                                   0x01000000 0 0x00000000
 469                                   0 0x00800000>;
 470                 };
 471         };
 472 };