arch/powerpc/include/asm/mpic.h

   1 #ifndef _ASM_POWERPC_MPIC_H
   2 #define _ASM_POWERPC_MPIC_H
   3 #ifdef __KERNEL__
   4
   5 #include <linux/irq.h>
   6 #include <asm/dcr.h>
   7 #include <asm/msi_bitmap.h>
   8
   9 /*
  10  * Global registers
  11  */
  12
  13 #define MPIC_GREG_BASE                  0x01000
  14
  15 #define MPIC_GREG_FEATURE_0             0x00000
  16 #define         MPIC_GREG_FEATURE_LAST_SRC_MASK         0x07ff0000
  17 #define         MPIC_GREG_FEATURE_LAST_SRC_SHIFT        16
  18 #define         MPIC_GREG_FEATURE_LAST_CPU_MASK         0x00001f00
  19 #define         MPIC_GREG_FEATURE_LAST_CPU_SHIFT        8
  20 #define         MPIC_GREG_FEATURE_VERSION_MASK          0xff
  21 #define MPIC_GREG_FEATURE_1             0x00010
  22 #define MPIC_GREG_GLOBAL_CONF_0         0x00020
  23 #define         MPIC_GREG_GCONF_RESET                   0x80000000
  24 /* On the FSL mpic implementations the Mode field is expand to be
  25  * 2 bits wide:
  26  *      0b00 = pass through (interrupts routed to IRQ0)
  27  *      0b01 = Mixed mode
  28  *      0b10 = reserved
  29  *      0b11 = External proxy / coreint
  30  */
  31 #define         MPIC_GREG_GCONF_COREINT                 0x60000000
  32 #define         MPIC_GREG_GCONF_8259_PTHROU_DIS         0x20000000
  33 #define         MPIC_GREG_GCONF_NO_BIAS                 0x10000000
  34 #define         MPIC_GREG_GCONF_BASE_MASK               0x000fffff
  35 #define         MPIC_GREG_GCONF_MCK                     0x08000000
  36 #define MPIC_GREG_GLOBAL_CONF_1         0x00030
  37 #define         MPIC_GREG_GLOBAL_CONF_1_SIE             0x08000000
  38 #define         MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK  0x70000000
  39 #define         MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)    \
  40                         (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
  41 #define MPIC_GREG_VENDOR_0              0x00040
  42 #define MPIC_GREG_VENDOR_1              0x00050
  43 #define MPIC_GREG_VENDOR_2              0x00060
  44 #define MPIC_GREG_VENDOR_3              0x00070
  45 #define MPIC_GREG_VENDOR_ID             0x00080
  46 #define         MPIC_GREG_VENDOR_ID_STEPPING_MASK       0x00ff0000
  47 #define         MPIC_GREG_VENDOR_ID_STEPPING_SHIFT      16
  48 #define         MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK      0x0000ff00
  49 #define         MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT     8
  50 #define         MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK      0x000000ff
  51 #define MPIC_GREG_PROCESSOR_INIT        0x00090
  52 #define MPIC_GREG_IPI_VECTOR_PRI_0      0x000a0
  53 #define MPIC_GREG_IPI_VECTOR_PRI_1      0x000b0
  54 #define MPIC_GREG_IPI_VECTOR_PRI_2      0x000c0
  55 #define MPIC_GREG_IPI_VECTOR_PRI_3      0x000d0
  56 #define MPIC_GREG_IPI_STRIDE            0x10
  57 #define MPIC_GREG_SPURIOUS              0x000e0
  58 #define MPIC_GREG_TIMER_FREQ            0x000f0
  59
  60 /*
  61  *
  62  * Timer registers
  63  */
  64 #define MPIC_TIMER_BASE                 0x01100
  65 #define MPIC_TIMER_STRIDE               0x40
  66
  67 #define MPIC_TIMER_CURRENT_CNT          0x00000
  68 #define MPIC_TIMER_BASE_CNT             0x00010
  69 #define MPIC_TIMER_VECTOR_PRI           0x00020
  70 #define MPIC_TIMER_DESTINATION          0x00030
  71
  72 /*
  73  * Per-Processor registers
  74  */
  75
  76 #define MPIC_CPU_THISBASE               0x00000
  77 #define MPIC_CPU_BASE                   0x20000
  78 #define MPIC_CPU_STRIDE                 0x01000
  79
  80 #define MPIC_CPU_IPI_DISPATCH_0         0x00040
  81 #define MPIC_CPU_IPI_DISPATCH_1         0x00050
  82 #define MPIC_CPU_IPI_DISPATCH_2         0x00060
  83 #define MPIC_CPU_IPI_DISPATCH_3         0x00070
  84 #define MPIC_CPU_IPI_DISPATCH_STRIDE    0x00010
  85 #define MPIC_CPU_CURRENT_TASK_PRI       0x00080
  86 #define         MPIC_CPU_TASKPRI_MASK                   0x0000000f
  87 #define MPIC_CPU_WHOAMI                 0x00090
  88 #define         MPIC_CPU_WHOAMI_MASK                    0x0000001f
  89 #define MPIC_CPU_INTACK                 0x000a0
  90 #define MPIC_CPU_EOI                    0x000b0
  91 #define MPIC_CPU_MCACK                  0x000c0
  92
  93 /*
  94  * Per-source registers
  95  */
  96
  97 #define MPIC_IRQ_BASE                   0x10000
  98 #define MPIC_IRQ_STRIDE                 0x00020
  99 #define MPIC_IRQ_VECTOR_PRI             0x00000
 100 #define         MPIC_VECPRI_MASK                        0x80000000
 101 #define         MPIC_VECPRI_ACTIVITY                    0x40000000      /* Read Only */
 102 #define         MPIC_VECPRI_PRIORITY_MASK               0x000f0000
 103 #define         MPIC_VECPRI_PRIORITY_SHIFT              16
 104 #define         MPIC_VECPRI_VECTOR_MASK                 0x000007ff
 105 #define         MPIC_VECPRI_POLARITY_POSITIVE           0x00800000
 106 #define         MPIC_VECPRI_POLARITY_NEGATIVE           0x00000000
 107 #define         MPIC_VECPRI_POLARITY_MASK               0x00800000
 108 #define         MPIC_VECPRI_SENSE_LEVEL                 0x00400000
 109 #define         MPIC_VECPRI_SENSE_EDGE                  0x00000000
 110 #define         MPIC_VECPRI_SENSE_MASK                  0x00400000
 111 #define MPIC_IRQ_DESTINATION            0x00010
 112
 113 #define MPIC_MAX_IRQ_SOURCES    2048
 114 #define MPIC_MAX_CPUS           32
 115 #define MPIC_MAX_ISU            32
 116
 117 /*
 118  * Tsi108 implementation of MPIC has many differences from the original one
 119  */
 120
 121 /*
 122  * Global registers
 123  */
 124
 125 #define TSI108_GREG_BASE                0x00000
 126 #define TSI108_GREG_FEATURE_0           0x00000
 127 #define TSI108_GREG_GLOBAL_CONF_0       0x00004
 128 #define TSI108_GREG_VENDOR_ID           0x0000c
 129 #define TSI108_GREG_IPI_VECTOR_PRI_0    0x00204         /* Doorbell 0 */
 130 #define TSI108_GREG_IPI_STRIDE          0x0c
 131 #define TSI108_GREG_SPURIOUS            0x00010
 132 #define TSI108_GREG_TIMER_FREQ          0x00014
 133
 134 /*
 135  * Timer registers
 136  */
 137 #define TSI108_TIMER_BASE               0x0030
 138 #define TSI108_TIMER_STRIDE             0x10
 139 #define TSI108_TIMER_CURRENT_CNT        0x00000
 140 #define TSI108_TIMER_BASE_CNT           0x00004
 141 #define TSI108_TIMER_VECTOR_PRI         0x00008
 142 #define TSI108_TIMER_DESTINATION        0x0000c
 143
 144 /*
 145  * Per-Processor registers
 146  */
 147 #define TSI108_CPU_BASE                 0x00300
 148 #define TSI108_CPU_STRIDE               0x00040
 149 #define TSI108_CPU_IPI_DISPATCH_0       0x00200
 150 #define TSI108_CPU_IPI_DISPATCH_STRIDE  0x00000
 151 #define TSI108_CPU_CURRENT_TASK_PRI     0x00000
 152 #define TSI108_CPU_WHOAMI               0xffffffff
 153 #define TSI108_CPU_INTACK               0x00004
 154 #define TSI108_CPU_EOI                  0x00008
 155 #define TSI108_CPU_MCACK                0x00004 /* Doesn't really exist here */
 156
 157 /*
 158  * Per-source registers
 159  */
 160 #define TSI108_IRQ_BASE                 0x00100
 161 #define TSI108_IRQ_STRIDE               0x00008
 162 #define TSI108_IRQ_VECTOR_PRI           0x00000
 163 #define TSI108_VECPRI_VECTOR_MASK       0x000000ff
 164 #define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000
 165 #define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000
 166 #define TSI108_VECPRI_SENSE_LEVEL       0x02000000
 167 #define TSI108_VECPRI_SENSE_EDGE        0x00000000
 168 #define TSI108_VECPRI_POLARITY_MASK     0x01000000
 169 #define TSI108_VECPRI_SENSE_MASK        0x02000000
 170 #define TSI108_IRQ_DESTINATION          0x00004
 171
 172 /* weird mpic register indices and mask bits in the HW info array */
 173 enum {
 174         MPIC_IDX_GREG_BASE = 0,
 175         MPIC_IDX_GREG_FEATURE_0,
 176         MPIC_IDX_GREG_GLOBAL_CONF_0,
 177         MPIC_IDX_GREG_VENDOR_ID,
 178         MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
 179         MPIC_IDX_GREG_IPI_STRIDE,
 180         MPIC_IDX_GREG_SPURIOUS,
 181         MPIC_IDX_GREG_TIMER_FREQ,
 182
 183         MPIC_IDX_TIMER_BASE,
 184         MPIC_IDX_TIMER_STRIDE,
 185         MPIC_IDX_TIMER_CURRENT_CNT,
 186         MPIC_IDX_TIMER_BASE_CNT,
 187         MPIC_IDX_TIMER_VECTOR_PRI,
 188         MPIC_IDX_TIMER_DESTINATION,
 189
 190         MPIC_IDX_CPU_BASE,
 191         MPIC_IDX_CPU_STRIDE,
 192         MPIC_IDX_CPU_IPI_DISPATCH_0,
 193         MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
 194         MPIC_IDX_CPU_CURRENT_TASK_PRI,
 195         MPIC_IDX_CPU_WHOAMI,
 196         MPIC_IDX_CPU_INTACK,
 197         MPIC_IDX_CPU_EOI,
 198         MPIC_IDX_CPU_MCACK,
 199
 200         MPIC_IDX_IRQ_BASE,
 201         MPIC_IDX_IRQ_STRIDE,
 202         MPIC_IDX_IRQ_VECTOR_PRI,
 203
 204         MPIC_IDX_VECPRI_VECTOR_MASK,
 205         MPIC_IDX_VECPRI_POLARITY_POSITIVE,
 206         MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
 207         MPIC_IDX_VECPRI_SENSE_LEVEL,
 208         MPIC_IDX_VECPRI_SENSE_EDGE,
 209         MPIC_IDX_VECPRI_POLARITY_MASK,
 210         MPIC_IDX_VECPRI_SENSE_MASK,
 211         MPIC_IDX_IRQ_DESTINATION,
 212         MPIC_IDX_END
 213 };
 214
 215
 216 #ifdef CONFIG_MPIC_U3_HT_IRQS
 217 /* Fixup table entry */
 218 struct mpic_irq_fixup
 219 {
 220         u8 __iomem      *base;
 221         u8 __iomem      *applebase;
 222         u32             data;
 223         unsigned int    index;
 224 };
 225 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 226
 227
 228 enum mpic_reg_type {
 229         mpic_access_mmio_le,
 230         mpic_access_mmio_be,
 231 #ifdef CONFIG_PPC_DCR
 232         mpic_access_dcr
 233 #endif
 234 };
 235
 236 struct mpic_reg_bank {
 237         u32 __iomem     *base;
 238 #ifdef CONFIG_PPC_DCR
 239         dcr_host_t      dhost;
 240 #endif /* CONFIG_PPC_DCR */
 241 };
 242
 243 struct mpic_irq_save {
 244         u32             vecprio,
 245                         dest;
 246 #ifdef CONFIG_MPIC_U3_HT_IRQS
 247         u32             fixup_data;
 248 #endif
 249 };
 250
 251 /* The instance data of a given MPIC */
 252 struct mpic
 253 {
 254         /* The OpenFirmware dt node for this MPIC */
 255         struct device_node *node;
 256
 257         /* The remapper for this MPIC */
 258         struct irq_domain       *irqhost;
 259
 260         /* The "linux" controller struct */
 261         struct irq_chip         hc_irq;
 262 #ifdef CONFIG_MPIC_U3_HT_IRQS
 263         struct irq_chip         hc_ht_irq;
 264 #endif
 265 #ifdef CONFIG_SMP
 266         struct irq_chip         hc_ipi;
 267 #endif
 268         struct irq_chip         hc_tm;
 269         const char              *name;
 270         /* Flags */
 271         unsigned int            flags;
 272         /* How many irq sources in a given ISU */
 273         unsigned int            isu_size;
 274         unsigned int            isu_shift;
 275         unsigned int            isu_mask;
 276         /* Number of sources */
 277         unsigned int            num_sources;
 278         /* default senses array */
 279         unsigned char           *senses;
 280         unsigned int            senses_count;
 281
 282         /* vector numbers used for internal sources (ipi/timers) */
 283         unsigned int            ipi_vecs[4];
 284         unsigned int            timer_vecs[8];
 285
 286         /* Spurious vector to program into unused sources */
 287         unsigned int            spurious_vec;
 288
 289 #ifdef CONFIG_MPIC_U3_HT_IRQS
 290         /* The fixup table */
 291         struct mpic_irq_fixup   *fixups;
 292         raw_spinlock_t  fixup_lock;
 293 #endif
 294
 295         /* Register access method */
 296         enum mpic_reg_type      reg_type;
 297
 298         /* The physical base address of the MPIC */
 299         phys_addr_t paddr;
 300
 301         /* The various ioremap'ed bases */
 302         struct mpic_reg_bank    gregs;
 303         struct mpic_reg_bank    tmregs;
 304         struct mpic_reg_bank    cpuregs[MPIC_MAX_CPUS];
 305         struct mpic_reg_bank    isus[MPIC_MAX_ISU];
 306
 307         /* Protected sources */
 308         unsigned long           *protected;
 309
 310 #ifdef CONFIG_MPIC_WEIRD
 311         /* Pointer to HW info array */
 312         u32                     *hw_set;
 313 #endif
 314
 315 #ifdef CONFIG_PCI_MSI
 316         struct msi_bitmap       msi_bitmap;
 317 #endif
 318
 319 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 320         u32                     isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
 321 #endif
 322
 323         /* link */
 324         struct mpic             *next;
 325
 326 #ifdef CONFIG_PM
 327         struct mpic_irq_save    *save_data;
 328 #endif
 329 };
 330
 331 /*
 332  * MPIC flags (passed to mpic_alloc)
 333  *
 334  * The top 4 bits contain an MPIC bhw id that is used to index the
 335  * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
 336  * Note setting any ID (leaving those bits to 0) means standard MPIC
 337  */
 338
 339 /*
 340  * This is a secondary ("chained") controller; it only uses the CPU0
 341  * registers.  Primary controllers have IPIs and affinity control.
 342  */
 343 #define MPIC_SECONDARY                  0x00000001
 344
 345 /* Set this for a big-endian MPIC */
 346 #define MPIC_BIG_ENDIAN                 0x00000002
 347 /* Broken U3 MPIC */
 348 #define MPIC_U3_HT_IRQS                 0x00000004
 349 /* Broken IPI registers (autodetected) */
 350 #define MPIC_BROKEN_IPI                 0x00000008
 351 /* Spurious vector requires EOI */
 352 #define MPIC_SPV_EOI                    0x00000020
 353 /* No passthrough disable */
 354 #define MPIC_NO_PTHROU_DIS              0x00000040
 355 /* DCR based MPIC */
 356 #define MPIC_USES_DCR                   0x00000080
 357 /* MPIC has 11-bit vector fields (or larger) */
 358 #define MPIC_LARGE_VECTORS              0x00000100
 359 /* Enable delivery of prio 15 interrupts as MCK instead of EE */
 360 #define MPIC_ENABLE_MCK                 0x00000200
 361 /* Disable bias among target selection, spread interrupts evenly */
 362 #define MPIC_NO_BIAS                    0x00000400
 363 /* Destination only supports a single CPU at a time */
 364 #define MPIC_SINGLE_DEST_CPU            0x00001000
 365 /* Enable CoreInt delivery of interrupts */
 366 #define MPIC_ENABLE_COREINT             0x00002000
 367 /* Do not reset the MPIC during initialization */
 368 #define MPIC_NO_RESET                   0x00004000
 369 /* Freescale MPIC (compatible includes "fsl,mpic") */
 370 #define MPIC_FSL                        0x00008000
 371
 372 /* MPIC HW modification ID */
 373 #define MPIC_REGSET_MASK                0xf0000000
 374 #define MPIC_REGSET(val)                (((val) & 0xf ) << 28)
 375 #define MPIC_GET_REGSET(flags)          (((flags) >> 28) & 0xf)
 376
 377 #define MPIC_REGSET_STANDARD            MPIC_REGSET(0)  /* Original MPIC */
 378 #define MPIC_REGSET_TSI108              MPIC_REGSET(1)  /* Tsi108/109 PIC */
 379
 380 /* Allocate the controller structure and setup the linux irq descs
 381  * for the range if interrupts passed in. No HW initialization is
 382  * actually performed.
 383  *
 384  * @phys_addr:  physial base address of the MPIC
 385  * @flags:      flags, see constants above
 386  * @isu_size:   number of interrupts in an ISU. Use 0 to use a
 387  *              standard ISU-less setup (aka powermac)
 388  * @irq_offset: first irq number to assign to this mpic
 389  * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
 390  *              to match the number of sources
 391  * @ipi_offset: first irq number to assign to this mpic IPI sources,
 392  *              used only on primary mpic
 393  * @senses:     array of sense values
 394  * @senses_num: number of entries in the array
 395  *
 396  * Note about the sense array. If none is passed, all interrupts are
 397  * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
 398  * case they are edge positive (and the array is ignored anyway).
 399  * The values in the array start at the first source of the MPIC,
 400  * that is senses[0] correspond to linux irq "irq_offset".
 401  */
 402 extern struct mpic *mpic_alloc(struct device_node *node,
 403                                phys_addr_t phys_addr,
 404                                unsigned int flags,
 405                                unsigned int isu_size,
 406                                unsigned int irq_count,
 407                                const char *name);
 408
 409 /* Assign ISUs, to call before mpic_init()
 410  *
 411  * @mpic:       controller structure as returned by mpic_alloc()
 412  * @isu_num:    ISU number
 413  * @phys_addr:  physical address of the ISU
 414  */
 415 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 416                             phys_addr_t phys_addr);
 417
 418 /* Set default sense codes
 419  *
 420  * @mpic:       controller
 421  * @senses:     array of sense codes
 422  * @count:      size of above array
 423  *
 424  * Optionally provide an array (indexed on hardware interrupt numbers
 425  * for this MPIC) of default sense codes for the chip. Those are linux
 426  * sense codes IRQ_TYPE_*
 427  *
 428  * The driver gets ownership of the pointer, don't dispose of it or
 429  * anything like that. __init only.
 430  */
 431 extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
 432
 433
 434 /* Initialize the controller. After this has been called, none of the above
 435  * should be called again for this mpic
 436  */
 437 extern void mpic_init(struct mpic *mpic);
 438
 439 /*
 440  * All of the following functions must only be used after the
 441  * ISUs have been assigned and the controller fully initialized
 442  * with mpic_init()
 443  */
 444
 445
 446 /* Change the priority of an interrupt. Default is 8 for irqs and
 447  * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
 448  * IPI number is then the offset'ed (linux irq number mapped to the IPI)
 449  */
 450 extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
 451
 452 /* Setup a non-boot CPU */
 453 extern void mpic_setup_this_cpu(void);
 454
 455 /* Clean up for kexec (or cpu offline or ...) */
 456 extern void mpic_teardown_this_cpu(int secondary);
 457
 458 /* Get the current cpu priority for this cpu (0..15) */
 459 extern int mpic_cpu_get_priority(void);
 460
 461 /* Set the current cpu priority for this cpu */
 462 extern void mpic_cpu_set_priority(int prio);
 463
 464 /* Request IPIs on primary mpic */
 465 extern void mpic_request_ipis(void);
 466
 467 /* Send a message (IPI) to a given target (cpu number or MSG_*) */
 468 void smp_mpic_message_pass(int target, int msg);
 469
 470 /* Unmask a specific virq */
 471 extern void mpic_unmask_irq(struct irq_data *d);
 472 /* Mask a specific virq */
 473 extern void mpic_mask_irq(struct irq_data *d);
 474 /* EOI a specific virq */
 475 extern void mpic_end_irq(struct irq_data *d);
 476
 477 /* Fetch interrupt from a given mpic */
 478 extern unsigned int mpic_get_one_irq(struct mpic *mpic);
 479 /* This one gets from the primary mpic */
 480 extern unsigned int mpic_get_irq(void);
 481 /* This one gets from the primary mpic via CoreInt*/
 482 extern unsigned int mpic_get_coreint_irq(void);
 483 /* Fetch Machine Check interrupt from primary mpic */
 484 extern unsigned int mpic_get_mcirq(void);
 485
 486 /* Set the EPIC clock ratio */
 487 void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
 488
 489 /* Enable/Disable EPIC serial interrupt mode */
 490 void mpic_set_serial_int(struct mpic *mpic, int enable);
 491
 492 #endif /* __KERNEL__ */
 493 #endif  /* _ASM_POWERPC_MPIC_H */