]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/powerpc/kernel/cpu_setup_6xx.S
Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
[mirror_ubuntu-bionic-kernel.git] / arch / powerpc / kernel / cpu_setup_6xx.S
1 /*
2 * This file contains low level CPU setup functions.
3 * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version
8 * 2 of the License, or (at your option) any later version.
9 *
10 */
11
12 #include <asm/processor.h>
13 #include <asm/page.h>
14 #include <asm/cputable.h>
15 #include <asm/ppc_asm.h>
16 #include <asm/asm-offsets.h>
17 #include <asm/cache.h>
18 #include <asm/mmu.h>
19
20 _GLOBAL(__setup_cpu_603)
21 mflr r5
22 BEGIN_MMU_FTR_SECTION
23 li r10,0
24 mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
25 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
26 BEGIN_FTR_SECTION
27 bl __init_fpu_registers
28 END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
29 bl setup_common_caches
30 mtlr r5
31 blr
32 _GLOBAL(__setup_cpu_604)
33 mflr r5
34 bl setup_common_caches
35 bl setup_604_hid0
36 mtlr r5
37 blr
38 _GLOBAL(__setup_cpu_750)
39 mflr r5
40 bl __init_fpu_registers
41 bl setup_common_caches
42 bl setup_750_7400_hid0
43 mtlr r5
44 blr
45 _GLOBAL(__setup_cpu_750cx)
46 mflr r5
47 bl __init_fpu_registers
48 bl setup_common_caches
49 bl setup_750_7400_hid0
50 bl setup_750cx
51 mtlr r5
52 blr
53 _GLOBAL(__setup_cpu_750fx)
54 mflr r5
55 bl __init_fpu_registers
56 bl setup_common_caches
57 bl setup_750_7400_hid0
58 bl setup_750fx
59 mtlr r5
60 blr
61 _GLOBAL(__setup_cpu_7400)
62 mflr r5
63 bl __init_fpu_registers
64 bl setup_7400_workarounds
65 bl setup_common_caches
66 bl setup_750_7400_hid0
67 mtlr r5
68 blr
69 _GLOBAL(__setup_cpu_7410)
70 mflr r5
71 bl __init_fpu_registers
72 bl setup_7410_workarounds
73 bl setup_common_caches
74 bl setup_750_7400_hid0
75 li r3,0
76 mtspr SPRN_L2CR2,r3
77 mtlr r5
78 blr
79 _GLOBAL(__setup_cpu_745x)
80 mflr r5
81 bl setup_common_caches
82 bl setup_745x_specifics
83 mtlr r5
84 blr
85
86 /* Enable caches for 603's, 604, 750 & 7400 */
87 setup_common_caches:
88 mfspr r11,SPRN_HID0
89 andi. r0,r11,HID0_DCE
90 ori r11,r11,HID0_ICE|HID0_DCE
91 ori r8,r11,HID0_ICFI
92 bne 1f /* don't invalidate the D-cache */
93 ori r8,r8,HID0_DCI /* unless it wasn't enabled */
94 1: sync
95 mtspr SPRN_HID0,r8 /* enable and invalidate caches */
96 sync
97 mtspr SPRN_HID0,r11 /* enable caches */
98 sync
99 isync
100 blr
101
102 /* 604, 604e, 604ev, ...
103 * Enable superscalar execution & branch history table
104 */
105 setup_604_hid0:
106 mfspr r11,SPRN_HID0
107 ori r11,r11,HID0_SIED|HID0_BHTE
108 ori r8,r11,HID0_BTCD
109 sync
110 mtspr SPRN_HID0,r8 /* flush branch target address cache */
111 sync /* on 604e/604r */
112 mtspr SPRN_HID0,r11
113 sync
114 isync
115 blr
116
117 /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
118 * erratas we work around here.
119 * Moto MPC710CE.pdf describes them, those are errata
120 * #3, #4 and #5
121 * Note that we assume the firmware didn't choose to
122 * apply other workarounds (there are other ones documented
123 * in the .pdf). It appear that Apple firmware only works
124 * around #3 and with the same fix we use. We may want to
125 * check if the CPU is using 60x bus mode in which case
126 * the workaround for errata #4 is useless. Also, we may
127 * want to explicitly clear HID0_NOPDST as this is not
128 * needed once we have applied workaround #5 (though it's
129 * not set by Apple's firmware at least).
130 */
131 setup_7400_workarounds:
132 mfpvr r3
133 rlwinm r3,r3,0,20,31
134 cmpwi 0,r3,0x0207
135 ble 1f
136 blr
137 setup_7410_workarounds:
138 mfpvr r3
139 rlwinm r3,r3,0,20,31
140 cmpwi 0,r3,0x0100
141 bnelr
142 1:
143 mfspr r11,SPRN_MSSSR0
144 /* Errata #3: Set L1OPQ_SIZE to 0x10 */
145 rlwinm r11,r11,0,9,6
146 oris r11,r11,0x0100
147 /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
148 oris r11,r11,0x0002
149 /* Errata #5: Set DRLT_SIZE to 0x01 */
150 rlwinm r11,r11,0,5,2
151 oris r11,r11,0x0800
152 sync
153 mtspr SPRN_MSSSR0,r11
154 sync
155 isync
156 blr
157
158 /* 740/750/7400/7410
159 * Enable Store Gathering (SGE), Address Brodcast (ABE),
160 * Branch History Table (BHTE), Branch Target ICache (BTIC)
161 * Dynamic Power Management (DPM), Speculative (SPD)
162 * Clear Instruction cache throttling (ICTC)
163 */
164 setup_750_7400_hid0:
165 mfspr r11,SPRN_HID0
166 ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
167 oris r11,r11,HID0_DPM@h
168 BEGIN_FTR_SECTION
169 xori r11,r11,HID0_BTIC
170 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
171 BEGIN_FTR_SECTION
172 xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
173 END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
174 li r3,HID0_SPD
175 andc r11,r11,r3 /* clear SPD: enable speculative */
176 li r3,0
177 mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
178 isync
179 mtspr SPRN_HID0,r11
180 sync
181 isync
182 blr
183
184 /* 750cx specific
185 * Looks like we have to disable NAP feature for some PLL settings...
186 * (waiting for confirmation)
187 */
188 setup_750cx:
189 mfspr r10, SPRN_HID1
190 rlwinm r10,r10,4,28,31
191 cmpwi cr0,r10,7
192 cmpwi cr1,r10,9
193 cmpwi cr2,r10,11
194 cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
195 cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
196 bnelr
197 lwz r6,CPU_SPEC_FEATURES(r4)
198 li r7,CPU_FTR_CAN_NAP
199 andc r6,r6,r7
200 stw r6,CPU_SPEC_FEATURES(r4)
201 blr
202
203 /* 750fx specific
204 */
205 setup_750fx:
206 blr
207
208 /* MPC 745x
209 * Enable Store Gathering (SGE), Branch Folding (FOLD)
210 * Branch History Table (BHTE), Branch Target ICache (BTIC)
211 * Dynamic Power Management (DPM), Speculative (SPD)
212 * Ensure our data cache instructions really operate.
213 * Timebase has to be running or we wouldn't have made it here,
214 * just ensure we don't disable it.
215 * Clear Instruction cache throttling (ICTC)
216 * Enable L2 HW prefetch
217 */
218 setup_745x_specifics:
219 /* We check for the presence of an L3 cache setup by
220 * the firmware. If any, we disable NAP capability as
221 * it's known to be bogus on rev 2.1 and earlier
222 */
223 BEGIN_FTR_SECTION
224 mfspr r11,SPRN_L3CR
225 andis. r11,r11,L3CR_L3E@h
226 beq 1f
227 END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
228 lwz r6,CPU_SPEC_FEATURES(r4)
229 andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
230 beq 1f
231 li r7,CPU_FTR_CAN_NAP
232 andc r6,r6,r7
233 stw r6,CPU_SPEC_FEATURES(r4)
234 1:
235 mfspr r11,SPRN_HID0
236
237 /* All of the bits we have to set.....
238 */
239 ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
240 ori r11,r11,HID0_LRSTK | HID0_BTIC
241 oris r11,r11,HID0_DPM@h
242 BEGIN_MMU_FTR_SECTION
243 oris r11,r11,HID0_HIGH_BAT@h
244 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
245 BEGIN_FTR_SECTION
246 xori r11,r11,HID0_BTIC
247 END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
248 BEGIN_FTR_SECTION
249 xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
250 END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
251
252 /* All of the bits we have to clear....
253 */
254 li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
255 andc r11,r11,r3 /* clear SPD: enable speculative */
256 li r3,0
257
258 mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
259 isync
260 mtspr SPRN_HID0,r11
261 sync
262 isync
263
264 /* Enable L2 HW prefetch, if L2 is enabled
265 */
266 mfspr r3,SPRN_L2CR
267 andis. r3,r3,L2CR_L2E@h
268 beqlr
269 mfspr r3,SPRN_MSSCR0
270 ori r3,r3,3
271 sync
272 mtspr SPRN_MSSCR0,r3
273 sync
274 isync
275 blr
276
277 /*
278 * Initialize the FPU registers. This is needed to work around an errata
279 * in some 750 cpus where using a not yet initialized FPU register after
280 * power on reset may hang the CPU
281 */
282 _GLOBAL(__init_fpu_registers)
283 mfmsr r10
284 ori r11,r10,MSR_FP
285 mtmsr r11
286 isync
287 addis r9,r3,empty_zero_page@ha
288 addi r9,r9,empty_zero_page@l
289 REST_32FPRS(0,r9)
290 sync
291 mtmsr r10
292 isync
293 blr
294
295
296 /* Definitions for the table use to save CPU states */
297 #define CS_HID0 0
298 #define CS_HID1 4
299 #define CS_HID2 8
300 #define CS_MSSCR0 12
301 #define CS_MSSSR0 16
302 #define CS_ICTRL 20
303 #define CS_LDSTCR 24
304 #define CS_LDSTDB 28
305 #define CS_SIZE 32
306
307 .data
308 .balign L1_CACHE_BYTES
309 cpu_state_storage:
310 .space CS_SIZE
311 .balign L1_CACHE_BYTES,0
312 .text
313
314 /* Called in normal context to backup CPU 0 state. This
315 * does not include cache settings. This function is also
316 * called for machine sleep. This does not include the MMU
317 * setup, BATs, etc... but rather the "special" registers
318 * like HID0, HID1, MSSCR0, etc...
319 */
320 _GLOBAL(__save_cpu_setup)
321 /* Some CR fields are volatile, we back it up all */
322 mfcr r7
323
324 /* Get storage ptr */
325 lis r5,cpu_state_storage@h
326 ori r5,r5,cpu_state_storage@l
327
328 /* Save HID0 (common to all CONFIG_6xx cpus) */
329 mfspr r3,SPRN_HID0
330 stw r3,CS_HID0(r5)
331
332 /* Now deal with CPU type dependent registers */
333 mfspr r3,SPRN_PVR
334 srwi r3,r3,16
335 cmplwi cr0,r3,0x8000 /* 7450 */
336 cmplwi cr1,r3,0x000c /* 7400 */
337 cmplwi cr2,r3,0x800c /* 7410 */
338 cmplwi cr3,r3,0x8001 /* 7455 */
339 cmplwi cr4,r3,0x8002 /* 7457 */
340 cmplwi cr5,r3,0x8003 /* 7447A */
341 cmplwi cr6,r3,0x7000 /* 750FX */
342 cmplwi cr7,r3,0x8004 /* 7448 */
343 /* cr1 is 7400 || 7410 */
344 cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
345 /* cr0 is 74xx */
346 cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
347 cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
348 cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
349 cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
350 cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
351 bne 1f
352 /* Backup 74xx specific regs */
353 mfspr r4,SPRN_MSSCR0
354 stw r4,CS_MSSCR0(r5)
355 mfspr r4,SPRN_MSSSR0
356 stw r4,CS_MSSSR0(r5)
357 beq cr1,1f
358 /* Backup 745x specific registers */
359 mfspr r4,SPRN_HID1
360 stw r4,CS_HID1(r5)
361 mfspr r4,SPRN_ICTRL
362 stw r4,CS_ICTRL(r5)
363 mfspr r4,SPRN_LDSTCR
364 stw r4,CS_LDSTCR(r5)
365 mfspr r4,SPRN_LDSTDB
366 stw r4,CS_LDSTDB(r5)
367 1:
368 bne cr6,1f
369 /* Backup 750FX specific registers */
370 mfspr r4,SPRN_HID1
371 stw r4,CS_HID1(r5)
372 /* If rev 2.x, backup HID2 */
373 mfspr r3,SPRN_PVR
374 andi. r3,r3,0xff00
375 cmpwi cr0,r3,0x0200
376 bne 1f
377 mfspr r4,SPRN_HID2
378 stw r4,CS_HID2(r5)
379 1:
380 mtcr r7
381 blr
382
383 /* Called with no MMU context (typically MSR:IR/DR off) to
384 * restore CPU state as backed up by the previous
385 * function. This does not include cache setting
386 */
387 _GLOBAL(__restore_cpu_setup)
388 /* Some CR fields are volatile, we back it up all */
389 mfcr r7
390
391 /* Get storage ptr */
392 lis r5,(cpu_state_storage-KERNELBASE)@h
393 ori r5,r5,cpu_state_storage@l
394
395 /* Restore HID0 */
396 lwz r3,CS_HID0(r5)
397 sync
398 isync
399 mtspr SPRN_HID0,r3
400 sync
401 isync
402
403 /* Now deal with CPU type dependent registers */
404 mfspr r3,SPRN_PVR
405 srwi r3,r3,16
406 cmplwi cr0,r3,0x8000 /* 7450 */
407 cmplwi cr1,r3,0x000c /* 7400 */
408 cmplwi cr2,r3,0x800c /* 7410 */
409 cmplwi cr3,r3,0x8001 /* 7455 */
410 cmplwi cr4,r3,0x8002 /* 7457 */
411 cmplwi cr5,r3,0x8003 /* 7447A */
412 cmplwi cr6,r3,0x7000 /* 750FX */
413 cmplwi cr7,r3,0x8004 /* 7448 */
414 /* cr1 is 7400 || 7410 */
415 cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
416 /* cr0 is 74xx */
417 cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
418 cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
419 cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
420 cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
421 cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
422 bne 2f
423 /* Restore 74xx specific regs */
424 lwz r4,CS_MSSCR0(r5)
425 sync
426 mtspr SPRN_MSSCR0,r4
427 sync
428 isync
429 lwz r4,CS_MSSSR0(r5)
430 sync
431 mtspr SPRN_MSSSR0,r4
432 sync
433 isync
434 bne cr2,1f
435 /* Clear 7410 L2CR2 */
436 li r4,0
437 mtspr SPRN_L2CR2,r4
438 1: beq cr1,2f
439 /* Restore 745x specific registers */
440 lwz r4,CS_HID1(r5)
441 sync
442 mtspr SPRN_HID1,r4
443 isync
444 sync
445 lwz r4,CS_ICTRL(r5)
446 sync
447 mtspr SPRN_ICTRL,r4
448 isync
449 sync
450 lwz r4,CS_LDSTCR(r5)
451 sync
452 mtspr SPRN_LDSTCR,r4
453 isync
454 sync
455 lwz r4,CS_LDSTDB(r5)
456 sync
457 mtspr SPRN_LDSTDB,r4
458 isync
459 sync
460 2: bne cr6,1f
461 /* Restore 750FX specific registers
462 * that is restore HID2 on rev 2.x and PLL config & switch
463 * to PLL 0 on all
464 */
465 /* If rev 2.x, restore HID2 with low voltage bit cleared */
466 mfspr r3,SPRN_PVR
467 andi. r3,r3,0xff00
468 cmpwi cr0,r3,0x0200
469 bne 4f
470 lwz r4,CS_HID2(r5)
471 rlwinm r4,r4,0,19,17
472 mtspr SPRN_HID2,r4
473 sync
474 4:
475 lwz r4,CS_HID1(r5)
476 rlwinm r5,r4,0,16,14
477 mtspr SPRN_HID1,r5
478 /* Wait for PLL to stabilize */
479 mftbl r5
480 3: mftbl r6
481 sub r6,r6,r5
482 cmplwi cr0,r6,10000
483 ble 3b
484 /* Setup final PLL */
485 mtspr SPRN_HID1,r4
486 1:
487 mtcr r7
488 blr
489