arch/powerpc/kernel/cpu_setup_fsl_booke.S

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * This file contains low level CPU setup functions.
   4  * Kumar Gala <galak@kernel.crashing.org>
   5  * Copyright 2009 Freescale Semiconductor, Inc.
   6  *
   7  * Based on cpu_setup_6xx code by
   8  * Benjamin Herrenschmidt <benh@kernel.crashing.org>
   9  */
  10
  11 #include <asm/page.h>
  12 #include <asm/processor.h>
  13 #include <asm/cputable.h>
  14 #include <asm/ppc_asm.h>
  15 #include <asm/nohash/mmu-book3e.h>
  16 #include <asm/asm-offsets.h>
  17 #include <asm/mpc85xx.h>
  18
  19 _GLOBAL(__e500_icache_setup)
  20         mfspr   r0, SPRN_L1CSR1
  21         andi.   r3, r0, L1CSR1_ICE
  22         bnelr                           /* Already enabled */
  23         oris    r0, r0, L1CSR1_CPE@h
  24         ori     r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR |  L1CSR1_ICE)
  25         mtspr   SPRN_L1CSR1, r0         /* Enable I-Cache */
  26         isync
  27         blr
  28
  29 _GLOBAL(__e500_dcache_setup)
  30         mfspr   r0, SPRN_L1CSR0
  31         andi.   r3, r0, L1CSR0_DCE
  32         bnelr                           /* Already enabled */
  33         msync
  34         isync
  35         li      r0, 0
  36         mtspr   SPRN_L1CSR0, r0         /* Disable */
  37         msync
  38         isync
  39         li      r0, (L1CSR0_DCFI | L1CSR0_CLFC)
  40         mtspr   SPRN_L1CSR0, r0         /* Invalidate */
  41         isync
  42 1:      mfspr   r0, SPRN_L1CSR0
  43         andi.   r3, r0, L1CSR0_CLFC
  44         bne+    1b                      /* Wait for lock bits reset */
  45         oris    r0, r0, L1CSR0_CPE@h
  46         ori     r0, r0, L1CSR0_DCE
  47         msync
  48         isync
  49         mtspr   SPRN_L1CSR0, r0         /* Enable */
  50         isync
  51         blr
  52
  53 /*
  54  * FIXME - we haven't yet done testing to determine a reasonable default
  55  * value for PW20_WAIT_IDLE_BIT.
  56  */
  57 #define PW20_WAIT_IDLE_BIT              50 /* 1ms, TB frequency is 41.66MHZ */
  58 _GLOBAL(setup_pw20_idle)
  59         mfspr   r3, SPRN_PWRMGTCR0
  60
  61         /* Set PW20_WAIT bit, enable pw20 state*/
  62         ori     r3, r3, PWRMGTCR0_PW20_WAIT
  63         li      r11, PW20_WAIT_IDLE_BIT
  64
  65         /* Set Automatic PW20 Core Idle Count */
  66         rlwimi  r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT
  67
  68         mtspr   SPRN_PWRMGTCR0, r3
  69
  70         blr
  71
  72 /*
  73  * FIXME - we haven't yet done testing to determine a reasonable default
  74  * value for AV_WAIT_IDLE_BIT.
  75  */
  76 #define AV_WAIT_IDLE_BIT                50 /* 1ms, TB frequency is 41.66MHZ */
  77 _GLOBAL(setup_altivec_idle)
  78         mfspr   r3, SPRN_PWRMGTCR0
  79
  80         /* Enable Altivec Idle */
  81         oris    r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
  82         li      r11, AV_WAIT_IDLE_BIT
  83
  84         /* Set Automatic AltiVec Idle Count */
  85         rlwimi  r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
  86
  87         mtspr   SPRN_PWRMGTCR0, r3
  88
  89         blr
  90
  91 #ifdef CONFIG_PPC_E500MC
  92 _GLOBAL(__setup_cpu_e6500)
  93         mflr    r6
  94 #ifdef CONFIG_PPC64
  95         bl      setup_altivec_ivors
  96         /* Touch IVOR42 only if the CPU supports E.HV category */
  97         mfspr   r10,SPRN_MMUCFG
  98         rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
  99         beq     1f
 100         bl      setup_lrat_ivor
 101 1:
 102 #endif
 103         bl      setup_pw20_idle
 104         bl      setup_altivec_idle
 105         bl      __setup_cpu_e5500
 106         mtlr    r6
 107         blr
 108 #endif /* CONFIG_PPC_E500MC */
 109
 110 #ifdef CONFIG_PPC32
 111 #ifdef CONFIG_E200
 112 _GLOBAL(__setup_cpu_e200)
 113         /* enable dedicated debug exception handling resources (Debug APU) */
 114         mfspr   r3,SPRN_HID0
 115         ori     r3,r3,HID0_DAPUEN@l
 116         mtspr   SPRN_HID0,r3
 117         b       __setup_e200_ivors
 118 #endif /* CONFIG_E200 */
 119
 120 #ifdef CONFIG_E500
 121 #ifndef CONFIG_PPC_E500MC
 122 _GLOBAL(__setup_cpu_e500v1)
 123 _GLOBAL(__setup_cpu_e500v2)
 124         mflr    r4
 125         bl      __e500_icache_setup
 126         bl      __e500_dcache_setup
 127         bl      __setup_e500_ivors
 128 #if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
 129         /* Ensure that RFXE is set */
 130         mfspr   r3,SPRN_HID1
 131         oris    r3,r3,HID1_RFXE@h
 132         mtspr   SPRN_HID1,r3
 133 #endif
 134         mtlr    r4
 135         blr
 136 #else /* CONFIG_PPC_E500MC */
 137 _GLOBAL(__setup_cpu_e500mc)
 138 _GLOBAL(__setup_cpu_e5500)
 139         mflr    r5
 140         bl      __e500_icache_setup
 141         bl      __e500_dcache_setup
 142         bl      __setup_e500mc_ivors
 143         /*
 144          * We only want to touch IVOR38-41 if we're running on hardware
 145          * that supports category E.HV.  The architectural way to determine
 146          * this is MMUCFG[LPIDSIZE].
 147          */
 148         mfspr   r3, SPRN_MMUCFG
 149         rlwinm. r3, r3, 0, MMUCFG_LPIDSIZE
 150         beq     1f
 151         bl      __setup_ehv_ivors
 152         b       2f
 153 1:
 154         lwz     r3, CPU_SPEC_FEATURES(r4)
 155         /* We need this check as cpu_setup is also called for
 156          * the secondary cores. So, if we have already cleared
 157          * the feature on the primary core, avoid doing it on the
 158          * secondary core.
 159          */
 160         andi.   r6, r3, CPU_FTR_EMB_HV
 161         beq     2f
 162         rlwinm  r3, r3, 0, ~CPU_FTR_EMB_HV
 163         stw     r3, CPU_SPEC_FEATURES(r4)
 164 2:
 165         mtlr    r5
 166         blr
 167 #endif /* CONFIG_PPC_E500MC */
 168 #endif /* CONFIG_E500 */
 169 #endif /* CONFIG_PPC32 */
 170
 171 #ifdef CONFIG_PPC_BOOK3E_64
 172 _GLOBAL(__restore_cpu_e6500)
 173         mflr    r5
 174         bl      setup_altivec_ivors
 175         /* Touch IVOR42 only if the CPU supports E.HV category */
 176         mfspr   r10,SPRN_MMUCFG
 177         rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
 178         beq     1f
 179         bl      setup_lrat_ivor
 180 1:
 181         bl      setup_pw20_idle
 182         bl      setup_altivec_idle
 183         bl      __restore_cpu_e5500
 184         mtlr    r5
 185         blr
 186
 187 _GLOBAL(__restore_cpu_e5500)
 188         mflr    r4
 189         bl      __e500_icache_setup
 190         bl      __e500_dcache_setup
 191         bl      __setup_base_ivors
 192         bl      setup_perfmon_ivor
 193         bl      setup_doorbell_ivors
 194         /*
 195          * We only want to touch IVOR38-41 if we're running on hardware
 196          * that supports category E.HV.  The architectural way to determine
 197          * this is MMUCFG[LPIDSIZE].
 198          */
 199         mfspr   r10,SPRN_MMUCFG
 200         rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
 201         beq     1f
 202         bl      setup_ehv_ivors
 203 1:
 204         mtlr    r4
 205         blr
 206
 207 _GLOBAL(__setup_cpu_e5500)
 208         mflr    r5
 209         bl      __e500_icache_setup
 210         bl      __e500_dcache_setup
 211         bl      __setup_base_ivors
 212         bl      setup_perfmon_ivor
 213         bl      setup_doorbell_ivors
 214         /*
 215          * We only want to touch IVOR38-41 if we're running on hardware
 216          * that supports category E.HV.  The architectural way to determine
 217          * this is MMUCFG[LPIDSIZE].
 218          */
 219         mfspr   r10,SPRN_MMUCFG
 220         rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
 221         beq     1f
 222         bl      setup_ehv_ivors
 223         b       2f
 224 1:
 225         ld      r10,CPU_SPEC_FEATURES(r4)
 226         LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV)
 227         andc    r10,r10,r9
 228         std     r10,CPU_SPEC_FEATURES(r4)
 229 2:
 230         mtlr    r5
 231         blr
 232 #endif
 233
 234 /* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */
 235 _GLOBAL(flush_dcache_L1)
 236         mfmsr   r10
 237         wrteei  0
 238
 239         mfspr   r3,SPRN_L1CFG0
 240         rlwinm  r5,r3,9,3       /* Extract cache block size */
 241         twlgti  r5,1            /* Only 32 and 64 byte cache blocks
 242                                  * are currently defined.
 243                                  */
 244         li      r4,32
 245         subfic  r6,r5,2         /* r6 = log2(1KiB / cache block size) -
 246                                  *      log2(number of ways)
 247                                  */
 248         slw     r5,r4,r5        /* r5 = cache block size */
 249
 250         rlwinm  r7,r3,0,0xff    /* Extract number of KiB in the cache */
 251         mulli   r7,r7,13        /* An 8-way cache will require 13
 252                                  * loads per set.
 253                                  */
 254         slw     r7,r7,r6
 255
 256         /* save off HID0 and set DCFA */
 257         mfspr   r8,SPRN_HID0
 258         ori     r9,r8,HID0_DCFA@l
 259         mtspr   SPRN_HID0,r9
 260         isync
 261
 262         LOAD_REG_IMMEDIATE(r6, KERNELBASE)
 263         mr      r4, r6
 264         mtctr   r7
 265
 266 1:      lwz     r3,0(r4)        /* Load... */
 267         add     r4,r4,r5
 268         bdnz    1b
 269
 270         msync
 271         mr      r4, r6
 272         mtctr   r7
 273
 274 1:      dcbf    0,r4            /* ...and flush. */
 275         add     r4,r4,r5
 276         bdnz    1b
 277
 278         /* restore HID0 */
 279         mtspr   SPRN_HID0,r8
 280         isync
 281
 282         wrtee r10
 283
 284         blr
 285
 286 has_L2_cache:
 287         /* skip L2 cache on P2040/P2040E as they have no L2 cache */
 288         mfspr   r3, SPRN_SVR
 289         /* shift right by 8 bits and clear E bit of SVR */
 290         rlwinm  r4, r3, 24, ~0x800
 291
 292         lis     r3, SVR_P2040@h
 293         ori     r3, r3, SVR_P2040@l
 294         cmpw    r4, r3
 295         beq     1f
 296
 297         li      r3, 1
 298         blr
 299 1:
 300         li      r3, 0
 301         blr
 302
 303 /* flush backside L2 cache */
 304 flush_backside_L2_cache:
 305         mflr    r10
 306         bl      has_L2_cache
 307         mtlr    r10
 308         cmpwi   r3, 0
 309         beq     2f
 310
 311         /* Flush the L2 cache */
 312         mfspr   r3, SPRN_L2CSR0
 313         ori     r3, r3, L2CSR0_L2FL@l
 314         msync
 315         isync
 316         mtspr   SPRN_L2CSR0,r3
 317         isync
 318
 319         /* check if it is complete */
 320 1:      mfspr   r3,SPRN_L2CSR0
 321         andi.   r3, r3, L2CSR0_L2FL@l
 322         bne     1b
 323 2:
 324         blr
 325
 326 _GLOBAL(cpu_down_flush_e500v2)
 327         mflr r0
 328         bl      flush_dcache_L1
 329         mtlr r0
 330         blr
 331
 332 _GLOBAL(cpu_down_flush_e500mc)
 333 _GLOBAL(cpu_down_flush_e5500)
 334         mflr r0
 335         bl      flush_dcache_L1
 336         bl      flush_backside_L2_cache
 337         mtlr r0
 338         blr
 339
 340 /* L1 Data Cache of e6500 contains no modified data, no flush is required */
 341 _GLOBAL(cpu_down_flush_e6500)
 342         blr