scsi: cxgb4i: call neigh_event_send() to update MAC address

[mirror_ubuntu-artful-kernel.git] / arch / powerpc / kernel / entry_64.S

/*
 *  PowerPC version 
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
 *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
 *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
 *  Adapted for Power Macintosh by Paul Mackerras.
 *  Low-level exception handlers and MMU support
 *  rewritten by Paul Mackerras.
 *    Copyright (C) 1996 Paul Mackerras.
 *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
 *
 *  This file contains the system call entry code, context switch
 *  code, and exception/interrupt return code for PowerPC.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 */

#include <linux/errno.h>
#include <linux/err.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
#include <asm/tm.h>
#include <asm/ppc-opcode.h>
#include <asm/export.h>

/*
 * System calls.
 */
        .section        ".toc","aw"
SYS_CALL_TABLE:
        .tc sys_call_table[TC],sys_call_table

/* This value is used to mark exception frames on the stack. */
exception_marker:
        .tc     ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER

        .section        ".text"
        .align 7

        .globl system_call_common
system_call_common:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
        extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
        bne     .Ltabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
        andi.   r10,r12,MSR_PR
        mr      r10,r1
        addi    r1,r1,-INT_FRAME_SIZE
        beq-    1f
        ld      r1,PACAKSAVE(r13)
1:      std     r10,0(r1)
        std     r11,_NIP(r1)
        std     r12,_MSR(r1)
        std     r0,GPR0(r1)
        std     r10,GPR1(r1)
        beq     2f                      /* if from kernel mode */
        ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
2:      std     r2,GPR2(r1)
        std     r3,GPR3(r1)
        mfcr    r2
        std     r4,GPR4(r1)
        std     r5,GPR5(r1)
        std     r6,GPR6(r1)
        std     r7,GPR7(r1)
        std     r8,GPR8(r1)
        li      r11,0
        std     r11,GPR9(r1)
        std     r11,GPR10(r1)
        std     r11,GPR11(r1)
        std     r11,GPR12(r1)
        std     r11,_XER(r1)
        std     r11,_CTR(r1)
        std     r9,GPR13(r1)
        mflr    r10
        /*
         * This clears CR0.SO (bit 28), which is the error indication on
         * return from this system call.
         */
        rldimi  r2,r11,28,(63-28)
        li      r11,0xc01
        std     r10,_LINK(r1)
        std     r11,_TRAP(r1)
        std     r3,ORIG_GPR3(r1)
        std     r2,_CCR(r1)
        ld      r2,PACATOC(r13)
        addi    r9,r1,STACK_FRAME_OVERHEAD
        ld      r11,exception_marker@toc(r2)
        std     r11,-16(r9)             /* "regshere" marker */
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
        beq     33f
        /* if from user, see if there are any DTL entries to process */
        ld      r10,PACALPPACAPTR(r13)  /* get ptr to VPA */
        ld      r11,PACA_DTL_RIDX(r13)  /* get log read index */
        addi    r10,r10,LPPACA_DTLIDX
        LDX_BE  r10,0,r10               /* get log write index */
        cmpd    cr1,r11,r10
        beq+    cr1,33f
        bl      accumulate_stolen_time
        REST_GPR(0,r1)
        REST_4GPRS(3,r1)
        REST_2GPRS(7,r1)
        addi    r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */

        /*
         * A syscall should always be called with interrupts enabled
         * so we just unconditionally hard-enable here. When some kind
         * of irq tracing is used, we additionally check that condition
         * is correct
         */
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG)
        lbz     r10,PACASOFTIRQEN(r13)
        xori    r10,r10,1
1:      tdnei   r10,0
        EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif

#ifdef CONFIG_PPC_BOOK3E
        wrteei  1
#else
        li      r11,MSR_RI
        ori     r11,r11,MSR_EE
        mtmsrd  r11,1
#endif /* CONFIG_PPC_BOOK3E */

system_call:                    /* label this so stack traces look sane */
        /* We do need to set SOFTE in the stack frame or the return
         * from interrupt will be painful
         */
        li      r10,1
        std     r10,SOFTE(r1)

        CURRENT_THREAD_INFO(r11, r1)
        ld      r10,TI_FLAGS(r11)
        andi.   r11,r10,_TIF_SYSCALL_DOTRACE
        bne     .Lsyscall_dotrace               /* does not return */
        cmpldi  0,r0,NR_syscalls
        bge-    .Lsyscall_enosys

.Lsyscall:
/*
 * Need to vector to 32 Bit or default sys_call_table here,
 * based on caller's run-mode / personality.
 */
        ld      r11,SYS_CALL_TABLE@toc(2)
        andi.   r10,r10,_TIF_32BIT
        beq     15f
        addi    r11,r11,8       /* use 32-bit syscall entries */
        clrldi  r3,r3,32
        clrldi  r4,r4,32
        clrldi  r5,r5,32
        clrldi  r6,r6,32
        clrldi  r7,r7,32
        clrldi  r8,r8,32
15:
        slwi    r0,r0,4
        ldx     r12,r11,r0      /* Fetch system call handler [ptr] */
        mtctr   r12
        bctrl                   /* Call handler */

.Lsyscall_exit:
        std     r3,RESULT(r1)
        CURRENT_THREAD_INFO(r12, r1)

        ld      r8,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S
        /* No MSR:RI on BookE */
        andi.   r10,r8,MSR_RI
        beq-    .Lunrecov_restore
#endif

/*
 * This is a few instructions into the actual syscall exit path (which actually
 * starts at .Lsyscall_exit) to cater to kprobe blacklisting and to reduce the
 * number of visible symbols for profiling purposes.
 *
 * We can probe from system_call until this point as MSR_RI is set. But once it
 * is cleared below, we won't be able to take a trap.
 *
 * This is blacklisted from kprobes further below with _ASM_NOKPROBE_SYMBOL().
 */
system_call_exit:
        /*
         * Disable interrupts so current_thread_info()->flags can't change,
         * and so that we don't get interrupted after loading SRR0/1.
         */
#ifdef CONFIG_PPC_BOOK3E
        wrteei  0
#else
        /*
         * For performance reasons we clear RI the same time that we
         * clear EE. We only need to clear RI just before we restore r13
         * below, but batching it with EE saves us one expensive mtmsrd call.
         * We have to be careful to restore RI if we branch anywhere from
         * here (eg syscall_exit_work).
         */
        li      r11,0
        mtmsrd  r11,1
#endif /* CONFIG_PPC_BOOK3E */

        ld      r9,TI_FLAGS(r12)
        li      r11,-MAX_ERRNO
        andi.   r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
        bne-    .Lsyscall_exit_work

        /* If MSR_FP and MSR_VEC are set in user msr, then no need to restore */
        li      r7,MSR_FP
#ifdef CONFIG_ALTIVEC
        oris    r7,r7,MSR_VEC@h
#endif
        and     r0,r8,r7
        cmpd    r0,r7
        bne     .Lsyscall_restore_math
.Lsyscall_restore_math_cont:

        cmpld   r3,r11
        ld      r5,_CCR(r1)
        bge-    .Lsyscall_error
.Lsyscall_error_cont:
        ld      r7,_NIP(r1)
BEGIN_FTR_SECTION
        stdcx.  r0,0,r1                 /* to clear the reservation */
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
        andi.   r6,r8,MSR_PR
        ld      r4,_LINK(r1)

        beq-    1f
        ACCOUNT_CPU_USER_EXIT(r13, r11, r12)

BEGIN_FTR_SECTION
        HMT_MEDIUM_LOW
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

        ld      r13,GPR13(r1)   /* only restore r13 if returning to usermode */
1:      ld      r2,GPR2(r1)
        ld      r1,GPR1(r1)
        mtlr    r4
        mtcr    r5
        mtspr   SPRN_SRR0,r7
        mtspr   SPRN_SRR1,r8
        RFI
        b       .       /* prevent speculative execution */

.Lsyscall_error:
        oris    r5,r5,0x1000    /* Set SO bit in CR */
        neg     r3,r3
        std     r5,_CCR(r1)
        b       .Lsyscall_error_cont

.Lsyscall_restore_math:
        /*
         * Some initial tests from restore_math to avoid the heavyweight
         * C code entry and MSR manipulations.
         */
        LOAD_REG_IMMEDIATE(r0, MSR_TS_MASK)
        and.    r0,r0,r8
        bne     1f

        ld      r7,PACACURRENT(r13)
        lbz     r0,THREAD+THREAD_LOAD_FP(r7)
#ifdef CONFIG_ALTIVEC
        lbz     r6,THREAD+THREAD_LOAD_VEC(r7)
        add     r0,r0,r6
#endif
        cmpdi   r0,0
        beq     .Lsyscall_restore_math_cont

1:      addi    r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_BOOK3S
        li      r10,MSR_RI
        mtmsrd  r10,1           /* Restore RI */
#endif
        bl      restore_math
#ifdef CONFIG_PPC_BOOK3S
        li      r11,0
        mtmsrd  r11,1
#endif
        /* Restore volatiles, reload MSR from updated one */
        ld      r8,_MSR(r1)
        ld      r3,RESULT(r1)
        li      r11,-MAX_ERRNO
        b       .Lsyscall_restore_math_cont

/* Traced system call support */
.Lsyscall_dotrace:
        bl      save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      do_syscall_trace_enter

        /*
         * We use the return value of do_syscall_trace_enter() as the syscall
         * number. If the syscall was rejected for any reason do_syscall_trace_enter()
         * returns an invalid syscall number and the test below against
         * NR_syscalls will fail.
         */
        mr      r0,r3

        /* Restore argument registers just clobbered and/or possibly changed. */
        ld      r3,GPR3(r1)
        ld      r4,GPR4(r1)
        ld      r5,GPR5(r1)
        ld      r6,GPR6(r1)
        ld      r7,GPR7(r1)
        ld      r8,GPR8(r1)

        /* Repopulate r9 and r10 for the syscall path */
        addi    r9,r1,STACK_FRAME_OVERHEAD
        CURRENT_THREAD_INFO(r10, r1)
        ld      r10,TI_FLAGS(r10)

        cmpldi  r0,NR_syscalls
        blt+    .Lsyscall

        /* Return code is already in r3 thanks to do_syscall_trace_enter() */
        b       .Lsyscall_exit


.Lsyscall_enosys:
        li      r3,-ENOSYS
        b       .Lsyscall_exit
        
.Lsyscall_exit_work:
#ifdef CONFIG_PPC_BOOK3S
        li      r10,MSR_RI
        mtmsrd  r10,1           /* Restore RI */
#endif
        /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
         If TIF_NOERROR is set, just save r3 as it is. */

        andi.   r0,r9,_TIF_RESTOREALL
        beq+    0f
        REST_NVGPRS(r1)
        b       2f
0:      cmpld   r3,r11          /* r11 is -MAX_ERRNO */
        blt+    1f
        andi.   r0,r9,_TIF_NOERROR
        bne-    1f
        ld      r5,_CCR(r1)
        neg     r3,r3
        oris    r5,r5,0x1000    /* Set SO bit in CR */
        std     r5,_CCR(r1)
1:      std     r3,GPR3(r1)
2:      andi.   r0,r9,(_TIF_PERSYSCALL_MASK)
        beq     4f

        /* Clear per-syscall TIF flags if any are set.  */

        li      r11,_TIF_PERSYSCALL_MASK
        addi    r12,r12,TI_FLAGS
3:      ldarx   r10,0,r12
        andc    r10,r10,r11
        stdcx.  r10,0,r12
        bne-    3b
        subi    r12,r12,TI_FLAGS

4:      /* Anything else left to do? */
BEGIN_FTR_SECTION
        lis     r3,INIT_PPR@highest     /* Set thread.ppr = 3 */
        ld      r10,PACACURRENT(r13)
        sldi    r3,r3,32        /* bits 11-13 are used for ppr */
        std     r3,TASKTHREADPPR(r10)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

        andi.   r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
        beq     ret_from_except_lite

        /* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
        wrteei  1
#else
        li      r10,MSR_RI
        ori     r10,r10,MSR_EE
        mtmsrd  r10,1
#endif /* CONFIG_PPC_BOOK3E */

        bl      save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      do_syscall_trace_leave
        b       ret_from_except

#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
.Ltabort_syscall:
        /* Firstly we need to enable TM in the kernel */
        mfmsr   r10
        li      r9, 1
        rldimi  r10, r9, MSR_TM_LG, 63-MSR_TM_LG
        mtmsrd  r10, 0

        /* tabort, this dooms the transaction, nothing else */
        li      r9, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
        TABORT(R9)

        /*
         * Return directly to userspace. We have corrupted user register state,
         * but userspace will never see that register state. Execution will
         * resume after the tbegin of the aborted transaction with the
         * checkpointed register state.
         */
        li      r9, MSR_RI
        andc    r10, r10, r9
        mtmsrd  r10, 1
        mtspr   SPRN_SRR0, r11
        mtspr   SPRN_SRR1, r12

        rfid
        b       .       /* prevent speculative execution */
#endif
_ASM_NOKPROBE_SYMBOL(system_call_common);
_ASM_NOKPROBE_SYMBOL(system_call_exit);

/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
        ld      r11,_TRAP(r1)
        andi.   r0,r11,1
        beqlr-
        SAVE_NVGPRS(r1)
        clrrdi  r0,r11,1
        std     r0,_TRAP(r1)
        blr
_ASM_NOKPROBE_SYMBOL(save_nvgprs);

        
/*
 * The sigsuspend and rt_sigsuspend system calls can call do_signal
 * and thus put the process into the stopped state where we might
 * want to examine its user state with ptrace.  Therefore we need
 * to save all the nonvolatile registers (r14 - r31) before calling
 * the C code.  Similarly, fork, vfork and clone need the full
 * register state on the stack so that it can be copied to the child.
 */

_GLOBAL(ppc_fork)
        bl      save_nvgprs
        bl      sys_fork
        b       .Lsyscall_exit

_GLOBAL(ppc_vfork)
        bl      save_nvgprs
        bl      sys_vfork
        b       .Lsyscall_exit

_GLOBAL(ppc_clone)
        bl      save_nvgprs
        bl      sys_clone
        b       .Lsyscall_exit

_GLOBAL(ppc32_swapcontext)
        bl      save_nvgprs
        bl      compat_sys_swapcontext
        b       .Lsyscall_exit

_GLOBAL(ppc64_swapcontext)
        bl      save_nvgprs
        bl      sys_swapcontext
        b       .Lsyscall_exit

_GLOBAL(ppc_switch_endian)
        bl      save_nvgprs
        bl      sys_switch_endian
        b       .Lsyscall_exit

_GLOBAL(ret_from_fork)
        bl      schedule_tail
        REST_NVGPRS(r1)
        li      r3,0
        b       .Lsyscall_exit

_GLOBAL(ret_from_kernel_thread)
        bl      schedule_tail
        REST_NVGPRS(r1)
        mtlr    r14
        mr      r3,r15
#ifdef PPC64_ELF_ABI_v2
        mr      r12,r14
#endif
        blrl
        li      r3,0
        b       .Lsyscall_exit

/*
 * This routine switches between two different tasks.  The process
 * state of one is saved on its kernel stack.  Then the state
 * of the other is restored from its kernel stack.  The memory
 * management hardware is updated to the second process's state.
 * Finally, we can return to the second process, via ret_from_except.
 * On entry, r3 points to the THREAD for the current task, r4
 * points to the THREAD for the new task.
 *
 * Note: there are two ways to get to the "going out" portion
 * of this code; either by coming in via the entry (_switch)
 * or via "fork" which must set up an environment equivalent
 * to the "_switch" path.  If you change this you'll have to change
 * the fork code also.
 *
 * The code which creates the new task context is in 'copy_thread'
 * in arch/powerpc/kernel/process.c 
 */
        .align  7
_GLOBAL(_switch)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-SWITCH_FRAME_SIZE(r1)
        /* r3-r13 are caller saved -- Cort */
        SAVE_8GPRS(14, r1)
        SAVE_10GPRS(22, r1)
        std     r0,_NIP(r1)     /* Return to switch caller */
        mfcr    r23
        std     r23,_CCR(r1)
        std     r1,KSP(r3)      /* Set old stack pointer */

        /*
         * On SMP kernels, care must be taken because a task may be
         * scheduled off CPUx and on to CPUy. Memory ordering must be
         * considered.
         *
         * Cacheable stores on CPUx will be visible when the task is
         * scheduled on CPUy by virtue of the core scheduler barriers
         * (see "Notes on Program-Order guarantees on SMP systems." in
         * kernel/sched/core.c).
         *
         * Uncacheable stores in the case of involuntary preemption must
         * be taken care of. The smp_mb__before_spin_lock() in __schedule()
         * is implemented as hwsync on powerpc, which orders MMIO too. So
         * long as there is an hwsync in the context switch path, it will
         * be executed on the source CPU after the task has performed
         * all MMIO ops on that CPU, and on the destination CPU before the
         * task performs any MMIO ops there.
         */

        /*
         * The kernel context switch path must contain a spin_lock,
         * which contains larx/stcx, which will clear any reservation
         * of the task being switched.
         */
#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
 * switch and will stop the HW from creating streams itself
 */
        DCBT_STOP_ALL_STREAM_IDS(r6)
#endif

        addi    r6,r4,-THREAD   /* Convert THREAD to 'current' */
        std     r6,PACACURRENT(r13)     /* Set new 'current' */

        ld      r8,KSP(r4)      /* new stack pointer */
#ifdef CONFIG_PPC_STD_MMU_64
BEGIN_MMU_FTR_SECTION
        b       2f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
BEGIN_FTR_SECTION
        clrrdi  r6,r8,28        /* get its ESID */
        clrrdi  r9,r1,28        /* get current sp ESID */
FTR_SECTION_ELSE
        clrrdi  r6,r8,40        /* get its 1T ESID */
        clrrdi  r9,r1,40        /* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
        clrldi. r0,r6,2         /* is new ESID c00000000? */
        cmpd    cr1,r6,r9       /* or is new ESID the same as current ESID? */
        cror    eq,4*cr1+eq,eq
        beq     2f              /* if yes, don't slbie it */

        /* Bolt in the new stack SLB entry */
        ld      r7,KSP_VSID(r4) /* Get new stack's VSID */
        oris    r0,r6,(SLB_ESID_V)@h
        ori     r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
        li      r9,MMU_SEGSIZE_1T       /* insert B field */
        oris    r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
        rldimi  r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)

        /* Update the last bolted SLB.  No write barriers are needed
         * here, provided we only update the current CPU's SLB shadow
         * buffer.
         */
        ld      r9,PACA_SLBSHADOWPTR(r13)
        li      r12,0
        std     r12,SLBSHADOW_STACKESID(r9)     /* Clear ESID */
        li      r12,SLBSHADOW_STACKVSID
        STDX_BE r7,r12,r9                       /* Save VSID */
        li      r12,SLBSHADOW_STACKESID
        STDX_BE r0,r12,r9                       /* Save ESID */

        /* No need to check for MMU_FTR_NO_SLBIE_B here, since when
         * we have 1TB segments, the only CPUs known to have the errata
         * only support less than 1TB of system memory and we'll never
         * actually hit this code path.
         */

        slbie   r6
        slbie   r6              /* Workaround POWER5 < DD2.1 issue */
        slbmte  r7,r0
        isync
2:
#endif /* CONFIG_PPC_STD_MMU_64 */

        CURRENT_THREAD_INFO(r7, r8)  /* base of new stack */
        /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
           because we don't need to leave the 288-byte ABI gap at the
           top of the kernel stack. */
        addi    r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE

        /*
         * PMU interrupts in radix may come in here. They will use r1, not
         * PACAKSAVE, so this stack switch will not cause a problem. They
         * will store to the process stack, which may then be migrated to
         * another CPU. However the rq lock release on this CPU paired with
         * the rq lock acquire on the new CPU before the stack becomes
         * active on the new CPU, will order those stores.
         */
        mr      r1,r8           /* start using new stack pointer */
        std     r7,PACAKSAVE(r13)

        ld      r6,_CCR(r1)
        mtcrf   0xFF,r6

        /* r3-r13 are destroyed -- Cort */
        REST_8GPRS(14, r1)
        REST_10GPRS(22, r1)

        /* convert old thread to its task_struct for return value */
        addi    r3,r3,-THREAD
        ld      r7,_NIP(r1)     /* Return to _switch caller in new task */
        mtlr    r7
        addi    r1,r1,SWITCH_FRAME_SIZE
        blr

        .align  7
_GLOBAL(ret_from_except)
        ld      r11,_TRAP(r1)
        andi.   r0,r11,1
        bne     ret_from_except_lite
        REST_NVGPRS(r1)

_GLOBAL(ret_from_except_lite)
        /*
         * Disable interrupts so that current_thread_info()->flags
         * can't change between when we test it and when we return
         * from the interrupt.
         */
#ifdef CONFIG_PPC_BOOK3E
        wrteei  0
#else
        li      r10,MSR_RI
        mtmsrd  r10,1             /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */

        CURRENT_THREAD_INFO(r9, r1)
        ld      r3,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3E
        ld      r10,PACACURRENT(r13)
#endif /* CONFIG_PPC_BOOK3E */
        ld      r4,TI_FLAGS(r9)
        andi.   r3,r3,MSR_PR
        beq     resume_kernel
#ifdef CONFIG_PPC_BOOK3E
        lwz     r3,(THREAD+THREAD_DBCR0)(r10)
#endif /* CONFIG_PPC_BOOK3E */

        /* Check current_thread_info()->flags */
        andi.   r0,r4,_TIF_USER_WORK_MASK
        bne     1f
#ifdef CONFIG_PPC_BOOK3E
        /*
         * Check to see if the dbcr0 register is set up to debug.
         * Use the internal debug mode bit to do this.
         */
        andis.  r0,r3,DBCR0_IDM@h
        beq     restore
        mfmsr   r0
        rlwinm  r0,r0,0,~MSR_DE /* Clear MSR.DE */
        mtmsr   r0
        mtspr   SPRN_DBCR0,r3
        li      r10, -1
        mtspr   SPRN_DBSR,r10
        b       restore
#else
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      restore_math
        b       restore
#endif
1:      andi.   r0,r4,_TIF_NEED_RESCHED
        beq     2f
        bl      restore_interrupts
        SCHEDULE_USER
        b       ret_from_except_lite
2:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
        andi.   r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
        bne     3f              /* only restore TM if nothing else to do */
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      restore_tm_state
        b       restore
3:
#endif
        bl      save_nvgprs
        /*
         * Use a non volatile GPR to save and restore our thread_info flags
         * across the call to restore_interrupts.
         */
        mr      r30,r4
        bl      restore_interrupts
        mr      r4,r30
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      do_notify_resume
        b       ret_from_except

resume_kernel:
        /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
        andis.  r8,r4,_TIF_EMULATE_STACK_STORE@h
        beq+    1f

        addi    r8,r1,INT_FRAME_SIZE    /* Get the kprobed function entry */

        ld      r3,GPR1(r1)
        subi    r3,r3,INT_FRAME_SIZE    /* dst: Allocate a trampoline exception frame */
        mr      r4,r1                   /* src:  current exception frame */
        mr      r1,r3                   /* Reroute the trampoline frame to r1 */

        /* Copy from the original to the trampoline. */
        li      r5,INT_FRAME_SIZE/8     /* size: INT_FRAME_SIZE */
        li      r6,0                    /* start offset: 0 */
        mtctr   r5
2:      ldx     r0,r6,r4
        stdx    r0,r6,r3
        addi    r6,r6,8
        bdnz    2b

        /* Do real store operation to complete stdu */
        ld      r5,GPR1(r1)
        std     r8,0(r5)

        /* Clear _TIF_EMULATE_STACK_STORE flag */
        lis     r11,_TIF_EMULATE_STACK_STORE@h
        addi    r5,r9,TI_FLAGS
0:      ldarx   r4,0,r5
        andc    r4,r4,r11
        stdcx.  r4,0,r5
        bne-    0b
1:

#ifdef CONFIG_PREEMPT
        /* Check if we need to preempt */
        andi.   r0,r4,_TIF_NEED_RESCHED
        beq+    restore
        /* Check that preempt_count() == 0 and interrupts are enabled */
        lwz     r8,TI_PREEMPT(r9)
        cmpwi   cr1,r8,0
        ld      r0,SOFTE(r1)
        cmpdi   r0,0
        crandc  eq,cr1*4+eq,eq
        bne     restore

        /*
         * Here we are preempting the current task. We want to make
         * sure we are soft-disabled first and reconcile irq state.
         */
        RECONCILE_IRQ_STATE(r3,r4)
1:      bl      preempt_schedule_irq

        /* Re-test flags and eventually loop */
        CURRENT_THREAD_INFO(r9, r1)
        ld      r4,TI_FLAGS(r9)
        andi.   r0,r4,_TIF_NEED_RESCHED
        bne     1b

        /*
         * arch_local_irq_restore() from preempt_schedule_irq above may
         * enable hard interrupt but we really should disable interrupts
         * when we return from the interrupt, and so that we don't get
         * interrupted after loading SRR0/1.
         */
#ifdef CONFIG_PPC_BOOK3E
        wrteei  0
#else
        li      r10,MSR_RI
        mtmsrd  r10,1             /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */

        .globl  fast_exc_return_irq
fast_exc_return_irq:
restore:
        /*
         * This is the main kernel exit path. First we check if we
         * are about to re-enable interrupts
         */
        ld      r5,SOFTE(r1)
        lbz     r6,PACASOFTIRQEN(r13)
        cmpwi   cr0,r5,0
        beq     .Lrestore_irq_off

        /* We are enabling, were we already enabled ? Yes, just return */
        cmpwi   cr0,r6,1
        beq     cr0,.Ldo_restore

        /*
         * We are about to soft-enable interrupts (we are hard disabled
         * at this point). We check if there's anything that needs to
         * be replayed first.
         */
        lbz     r0,PACAIRQHAPPENED(r13)
        cmpwi   cr0,r0,0
        bne-    .Lrestore_check_irq_replay

        /*
         * Get here when nothing happened while soft-disabled, just
         * soft-enable and move-on. We will hard-enable as a side
         * effect of rfi
         */
.Lrestore_no_replay:
        TRACE_ENABLE_INTS
        li      r0,1
        stb     r0,PACASOFTIRQEN(r13);

        /*
         * Final return path. BookE is handled in a different file
         */
.Ldo_restore:
#ifdef CONFIG_PPC_BOOK3E
        b       exception_return_book3e
#else
        /*
         * Clear the reservation. If we know the CPU tracks the address of
         * the reservation then we can potentially save some cycles and use
         * a larx. On POWER6 and POWER7 this is significantly faster.
         */
BEGIN_FTR_SECTION
        stdcx.  r0,0,r1         /* to clear the reservation */
FTR_SECTION_ELSE
        ldarx   r4,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)

        /*
         * Some code path such as load_up_fpu or altivec return directly
         * here. They run entirely hard disabled and do not alter the
         * interrupt state. They also don't use lwarx/stwcx. and thus
         * are known not to leave dangling reservations.
         */
        .globl  fast_exception_return
fast_exception_return:
        ld      r3,_MSR(r1)
        ld      r4,_CTR(r1)
        ld      r0,_LINK(r1)
        mtctr   r4
        mtlr    r0
        ld      r4,_XER(r1)
        mtspr   SPRN_XER,r4

        REST_8GPRS(5, r1)

        andi.   r0,r3,MSR_RI
        beq-    .Lunrecov_restore

        /* Load PPR from thread struct before we clear MSR:RI */
BEGIN_FTR_SECTION
        ld      r2,PACACURRENT(r13)
        ld      r2,TASKTHREADPPR(r2)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

        /*
         * Clear RI before restoring r13.  If we are returning to
         * userspace and we take an exception after restoring r13,
         * we end up corrupting the userspace r13 value.
         */
        li      r4,0
        mtmsrd  r4,1

#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
        /* TM debug */
        std     r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
#endif
        /*
         * r13 is our per cpu area, only restore it if we are returning to
         * userspace the value stored in the stack frame may belong to
         * another CPU.
         */
        andi.   r0,r3,MSR_PR
        beq     1f
BEGIN_FTR_SECTION
        mtspr   SPRN_PPR,r2     /* Restore PPR */
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
        ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
        REST_GPR(13, r1)
1:
        mtspr   SPRN_SRR1,r3

        ld      r2,_CCR(r1)
        mtcrf   0xFF,r2
        ld      r2,_NIP(r1)
        mtspr   SPRN_SRR0,r2

        ld      r0,GPR0(r1)
        ld      r2,GPR2(r1)
        ld      r3,GPR3(r1)
        ld      r4,GPR4(r1)
        ld      r1,GPR1(r1)

        rfid
        b       .       /* prevent speculative execution */

#endif /* CONFIG_PPC_BOOK3E */

        /*
         * We are returning to a context with interrupts soft disabled.
         *
         * However, we may also about to hard enable, so we need to
         * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
         * or that bit can get out of sync and bad things will happen
         */
.Lrestore_irq_off:
        ld      r3,_MSR(r1)
        lbz     r7,PACAIRQHAPPENED(r13)
        andi.   r0,r3,MSR_EE
        beq     1f
        rlwinm  r7,r7,0,~PACA_IRQ_HARD_DIS
        stb     r7,PACAIRQHAPPENED(r13)
1:      li      r0,0
        stb     r0,PACASOFTIRQEN(r13);
        TRACE_DISABLE_INTS
        b       .Ldo_restore

        /*
         * Something did happen, check if a re-emit is needed
         * (this also clears paca->irq_happened)
         */
.Lrestore_check_irq_replay:
        /* XXX: We could implement a fast path here where we check
         * for irq_happened being just 0x01, in which case we can
         * clear it and return. That means that we would potentially
         * miss a decrementer having wrapped all the way around.
         *
         * Still, this might be useful for things like hash_page
         */
        bl      __check_irq_replay
        cmpwi   cr0,r3,0
        beq     .Lrestore_no_replay
 
        /*
         * We need to re-emit an interrupt. We do so by re-using our
         * existing exception frame. We first change the trap value,
         * but we need to ensure we preserve the low nibble of it
         */
        ld      r4,_TRAP(r1)
        clrldi  r4,r4,60
        or      r4,r4,r3
        std     r4,_TRAP(r1)

        /*
         * Then find the right handler and call it. Interrupts are
         * still soft-disabled and we keep them that way.
        */
        cmpwi   cr0,r3,0x500
        bne     1f
        addi    r3,r1,STACK_FRAME_OVERHEAD;
        bl      do_IRQ
        b       ret_from_except
1:      cmpwi   cr0,r3,0xe60
        bne     1f
        addi    r3,r1,STACK_FRAME_OVERHEAD;
        bl      handle_hmi_exception
        b       ret_from_except
1:      cmpwi   cr0,r3,0x900
        bne     1f
        addi    r3,r1,STACK_FRAME_OVERHEAD;
        bl      timer_interrupt
        b       ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
        cmpwi   cr0,r3,0x280
#else
        BEGIN_FTR_SECTION
                cmpwi   cr0,r3,0xe80
        FTR_SECTION_ELSE
                cmpwi   cr0,r3,0xa00
        ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
#endif /* CONFIG_PPC_BOOK3E */
        bne     1f
        addi    r3,r1,STACK_FRAME_OVERHEAD;
        bl      doorbell_exception
        b       ret_from_except
#endif /* CONFIG_PPC_DOORBELL */
1:      b       ret_from_except /* What else to do here ? */
 
.Lunrecov_restore:
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      unrecoverable_exception
        b       .Lunrecov_restore

_ASM_NOKPROBE_SYMBOL(ret_from_except);
_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
_ASM_NOKPROBE_SYMBOL(resume_kernel);
_ASM_NOKPROBE_SYMBOL(fast_exc_return_irq);
_ASM_NOKPROBE_SYMBOL(restore);
_ASM_NOKPROBE_SYMBOL(fast_exception_return);


#ifdef CONFIG_PPC_RTAS
/*
 * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
 * called with the MMU off.
 *
 * In addition, we need to be in 32b mode, at least for now.
 * 
 * Note: r3 is an input parameter to rtas, so don't trash it...
 */
_GLOBAL(enter_rtas)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */

        /* Because RTAS is running in 32b mode, it clobbers the high order half
         * of all registers that it saves.  We therefore save those registers
         * RTAS might touch to the stack.  (r0, r3-r13 are caller saved)
         */
        SAVE_GPR(2, r1)                 /* Save the TOC */
        SAVE_GPR(13, r1)                /* Save paca */
        SAVE_8GPRS(14, r1)              /* Save the non-volatiles */
        SAVE_10GPRS(22, r1)             /* ditto */

        mfcr    r4
        std     r4,_CCR(r1)
        mfctr   r5
        std     r5,_CTR(r1)
        mfspr   r6,SPRN_XER
        std     r6,_XER(r1)
        mfdar   r7
        std     r7,_DAR(r1)
        mfdsisr r8
        std     r8,_DSISR(r1)

        /* Temporary workaround to clear CR until RTAS can be modified to
         * ignore all bits.
         */
        li      r0,0
        mtcr    r0

#ifdef CONFIG_BUG       
        /* There is no way it is acceptable to get here with interrupts enabled,
         * check it with the asm equivalent of WARN_ON
         */
        lbz     r0,PACASOFTIRQEN(r13)
1:      tdnei   r0,0
        EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
        
        /* Hard-disable interrupts */
        mfmsr   r6
        rldicl  r7,r6,48,1
        rotldi  r7,r7,16
        mtmsrd  r7,1

        /* Unfortunately, the stack pointer and the MSR are also clobbered,
         * so they are saved in the PACA which allows us to restore
         * our original state after RTAS returns.
         */
        std     r1,PACAR1(r13)
        std     r6,PACASAVEDMSR(r13)

        /* Setup our real return addr */        
        LOAD_REG_ADDR(r4,rtas_return_loc)
        clrldi  r4,r4,2                 /* convert to realmode address */
        mtlr    r4

        li      r0,0
        ori     r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
        andc    r0,r6,r0
        
        li      r9,1
        rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
        ori     r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE
        andc    r6,r0,r9

__enter_rtas:
        sync                            /* disable interrupts so SRR0/1 */
        mtmsrd  r0                      /* don't get trashed */

        LOAD_REG_ADDR(r4, rtas)
        ld      r5,RTASENTRY(r4)        /* get the rtas->entry value */
        ld      r4,RTASBASE(r4)         /* get the rtas->base value */
        
        mtspr   SPRN_SRR0,r5
        mtspr   SPRN_SRR1,r6
        rfid
        b       .       /* prevent speculative execution */

rtas_return_loc:
        FIXUP_ENDIAN

        /* relocation is off at this point */
        GET_PACA(r4)
        clrldi  r4,r4,2                 /* convert to realmode address */

        bcl     20,31,$+4
0:      mflr    r3
        ld      r3,(1f-0b)(r3)          /* get &rtas_restore_regs */

        mfmsr   r6
        li      r0,MSR_RI
        andc    r6,r6,r0
        sync    
        mtmsrd  r6
        
        ld      r1,PACAR1(r4)           /* Restore our SP */
        ld      r4,PACASAVEDMSR(r4)     /* Restore our MSR */

        mtspr   SPRN_SRR0,r3
        mtspr   SPRN_SRR1,r4
        rfid
        b       .       /* prevent speculative execution */
_ASM_NOKPROBE_SYMBOL(__enter_rtas)
_ASM_NOKPROBE_SYMBOL(rtas_return_loc)

        .align  3
1:      .llong  rtas_restore_regs

rtas_restore_regs:
        /* relocation is on at this point */
        REST_GPR(2, r1)                 /* Restore the TOC */
        REST_GPR(13, r1)                /* Restore paca */
        REST_8GPRS(14, r1)              /* Restore the non-volatiles */
        REST_10GPRS(22, r1)             /* ditto */

        GET_PACA(r13)

        ld      r4,_CCR(r1)
        mtcr    r4
        ld      r5,_CTR(r1)
        mtctr   r5
        ld      r6,_XER(r1)
        mtspr   SPRN_XER,r6
        ld      r7,_DAR(r1)
        mtdar   r7
        ld      r8,_DSISR(r1)
        mtdsisr r8

        addi    r1,r1,RTAS_FRAME_SIZE   /* Unstack our frame */
        ld      r0,16(r1)               /* get return address */

        mtlr    r0
        blr                             /* return to caller */

#endif /* CONFIG_PPC_RTAS */

_GLOBAL(enter_prom)
        mflr    r0
        std     r0,16(r1)
        stdu    r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */

        /* Because PROM is running in 32b mode, it clobbers the high order half
         * of all registers that it saves.  We therefore save those registers
         * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
         */
        SAVE_GPR(2, r1)
        SAVE_GPR(13, r1)
        SAVE_8GPRS(14, r1)
        SAVE_10GPRS(22, r1)
        mfcr    r10
        mfmsr   r11
        std     r10,_CCR(r1)
        std     r11,_MSR(r1)

        /* Put PROM address in SRR0 */
        mtsrr0  r4

        /* Setup our trampoline return addr in LR */
        bcl     20,31,$+4
0:      mflr    r4
        addi    r4,r4,(1f - 0b)
        mtlr    r4

        /* Prepare a 32-bit mode big endian MSR
         */
#ifdef CONFIG_PPC_BOOK3E
        rlwinm  r11,r11,0,1,31
        mtsrr1  r11
        rfi
#else /* CONFIG_PPC_BOOK3E */
        LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
        andc    r11,r11,r12
        mtsrr1  r11
        rfid
#endif /* CONFIG_PPC_BOOK3E */

1:      /* Return from OF */
        FIXUP_ENDIAN

        /* Just make sure that r1 top 32 bits didn't get
         * corrupt by OF
         */
        rldicl  r1,r1,0,32

        /* Restore the MSR (back to 64 bits) */
        ld      r0,_MSR(r1)
        MTMSRD(r0)
        isync

        /* Restore other registers */
        REST_GPR(2, r1)
        REST_GPR(13, r1)
        REST_8GPRS(14, r1)
        REST_10GPRS(22, r1)
        ld      r4,_CCR(r1)
        mtcr    r4
        
        addi    r1,r1,PROM_FRAME_SIZE
        ld      r0,16(r1)
        mtlr    r0
        blr