powerpc: Preload application text segment instead of TASK_UNMAPPED_BASE

[mirror_ubuntu-zesty-kernel.git] / arch / powerpc / kernel / exceptions-64s.S

/*
 * This file contains the 64-bit "server" PowerPC variant
 * of the low level exception handling including exception
 * vectors, exception return, part of the slb and stab
 * handling and other fixed offset specific things.
 *
 * This file is meant to be #included from head_64.S due to
 * position dependant assembly.
 *
 * Most of this originates from head_64.S and thus has the same
 * copyright history.
 *
 */

/*
 * We layout physical memory as follows:
 * 0x0000 - 0x00ff : Secondary processor spin code
 * 0x0100 - 0x2fff : pSeries Interrupt prologs
 * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
 * 0x6000 - 0x6fff : Initial (CPU0) segment table
 * 0x7000 - 0x7fff : FWNMI data area
 * 0x8000 -        : Early init and support code
 */


/*
 *   SPRG Usage
 *
 *   Register   Definition
 *
 *   SPRG0      reserved for hypervisor
 *   SPRG1      temp - used to save gpr
 *   SPRG2      temp - used to save gpr
 *   SPRG3      virt addr of paca
 */

/*
 * This is the start of the interrupt handlers for pSeries
 * This code runs with relocation off.
 * Code from here to __end_interrupts gets copied down to real
 * address 0x100 when we are running a relocatable kernel.
 * Therefore any relative branches in this section must only
 * branch to labels in this section.
 */
        . = 0x100
        .globl __start_interrupts
__start_interrupts:

        STD_EXCEPTION_PSERIES(0x100, system_reset)

        . = 0x200
_machine_check_pSeries:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13          /* save r13 */
        EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)

        . = 0x300
        .globl data_access_pSeries
data_access_pSeries:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13
BEGIN_FTR_SECTION
        mtspr   SPRN_SPRG2,r12
        mfspr   r13,SPRN_DAR
        mfspr   r12,SPRN_DSISR
        srdi    r13,r13,60
        rlwimi  r13,r12,16,0x20
        mfcr    r12
        cmpwi   r13,0x2c
        beq     do_stab_bolted_pSeries
        mtcrf   0x80,r12
        mfspr   r12,SPRN_SPRG2
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)

        . = 0x380
        .globl data_access_slb_pSeries
data_access_slb_pSeries:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13
        mfspr   r13,SPRN_SPRG3          /* get paca address into r13 */
        std     r3,PACA_EXSLB+EX_R3(r13)
        mfspr   r3,SPRN_DAR
        std     r9,PACA_EXSLB+EX_R9(r13)        /* save r9 - r12 */
        mfcr    r9
#ifdef __DISABLED__
        /* Keep that around for when we re-implement dynamic VSIDs */
        cmpdi   r3,0
        bge     slb_miss_user_pseries
#endif /* __DISABLED__ */
        std     r10,PACA_EXSLB+EX_R10(r13)
        std     r11,PACA_EXSLB+EX_R11(r13)
        std     r12,PACA_EXSLB+EX_R12(r13)
        mfspr   r10,SPRN_SPRG1
        std     r10,PACA_EXSLB+EX_R13(r13)
        mfspr   r12,SPRN_SRR1           /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
        b       .slb_miss_realmode
#else
        /*
         * We can't just use a direct branch to .slb_miss_realmode
         * because the distance from here to there depends on where
         * the kernel ends up being put.
         */
        mfctr   r11
        ld      r10,PACAKBASE(r13)
        LOAD_HANDLER(r10, .slb_miss_realmode)
        mtctr   r10
        bctr
#endif

        STD_EXCEPTION_PSERIES(0x400, instruction_access)

        . = 0x480
        .globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13
        mfspr   r13,SPRN_SPRG3          /* get paca address into r13 */
        std     r3,PACA_EXSLB+EX_R3(r13)
        mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
        std     r9,PACA_EXSLB+EX_R9(r13)        /* save r9 - r12 */
        mfcr    r9
#ifdef __DISABLED__
        /* Keep that around for when we re-implement dynamic VSIDs */
        cmpdi   r3,0
        bge     slb_miss_user_pseries
#endif /* __DISABLED__ */
        std     r10,PACA_EXSLB+EX_R10(r13)
        std     r11,PACA_EXSLB+EX_R11(r13)
        std     r12,PACA_EXSLB+EX_R12(r13)
        mfspr   r10,SPRN_SPRG1
        std     r10,PACA_EXSLB+EX_R13(r13)
        mfspr   r12,SPRN_SRR1           /* and SRR1 */
#ifndef CONFIG_RELOCATABLE
        b       .slb_miss_realmode
#else
        mfctr   r11
        ld      r10,PACAKBASE(r13)
        LOAD_HANDLER(r10, .slb_miss_realmode)
        mtctr   r10
        bctr
#endif

        MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
        STD_EXCEPTION_PSERIES(0x600, alignment)
        STD_EXCEPTION_PSERIES(0x700, program_check)
        STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
        MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
        STD_EXCEPTION_PSERIES(0xa00, trap_0a)
        STD_EXCEPTION_PSERIES(0xb00, trap_0b)

        . = 0xc00
        .globl  system_call_pSeries
system_call_pSeries:
        HMT_MEDIUM
BEGIN_FTR_SECTION
        cmpdi   r0,0x1ebe
        beq-    1f
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
        mr      r9,r13
        mfspr   r13,SPRN_SPRG3
        mfspr   r11,SPRN_SRR0
        ld      r12,PACAKBASE(r13)
        ld      r10,PACAKMSR(r13)
        LOAD_HANDLER(r12, system_call_entry)
        mtspr   SPRN_SRR0,r12
        mfspr   r12,SPRN_SRR1
        mtspr   SPRN_SRR1,r10
        rfid
        b       .       /* prevent speculative execution */

/* Fast LE/BE switch system call */
1:      mfspr   r12,SPRN_SRR1
        xori    r12,r12,MSR_LE
        mtspr   SPRN_SRR1,r12
        rfid            /* return to userspace */
        b       .

        STD_EXCEPTION_PSERIES(0xd00, single_step)
        STD_EXCEPTION_PSERIES(0xe00, trap_0e)

        /* We need to deal with the Altivec unavailable exception
         * here which is at 0xf20, thus in the middle of the
         * prolog code of the PerformanceMonitor one. A little
         * trickery is thus necessary
         */
        . = 0xf00
        b       performance_monitor_pSeries

        . = 0xf20
        b       altivec_unavailable_pSeries

        . = 0xf40
        b       vsx_unavailable_pSeries

#ifdef CONFIG_CBE_RAS
        HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
#endif /* CONFIG_CBE_RAS */
        STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
#ifdef CONFIG_CBE_RAS
        HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
#endif /* CONFIG_CBE_RAS */
        STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
#ifdef CONFIG_CBE_RAS
        HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
#endif /* CONFIG_CBE_RAS */

        . = 0x3000

/*** pSeries interrupt support ***/

        /* moved from 0xf00 */
        STD_EXCEPTION_PSERIES(., performance_monitor)
        STD_EXCEPTION_PSERIES(., altivec_unavailable)
        STD_EXCEPTION_PSERIES(., vsx_unavailable)

/*
 * An interrupt came in while soft-disabled; clear EE in SRR1,
 * clear paca->hard_enabled and return.
 */
masked_interrupt:
        stb     r10,PACAHARDIRQEN(r13)
        mtcrf   0x80,r9
        ld      r9,PACA_EXGEN+EX_R9(r13)
        mfspr   r10,SPRN_SRR1
        rldicl  r10,r10,48,1            /* clear MSR_EE */
        rotldi  r10,r10,16
        mtspr   SPRN_SRR1,r10
        ld      r10,PACA_EXGEN+EX_R10(r13)
        mfspr   r13,SPRN_SPRG1
        rfid
        b       .

        .align  7
do_stab_bolted_pSeries:
        mtcrf   0x80,r12
        mfspr   r12,SPRN_SPRG2
        EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)

#ifdef CONFIG_PPC_PSERIES
/*
 * Vectors for the FWNMI option.  Share common code.
 */
        .globl system_reset_fwnmi
      .align 7
system_reset_fwnmi:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13          /* save r13 */
        EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)

        .globl machine_check_fwnmi
      .align 7
machine_check_fwnmi:
        HMT_MEDIUM
        mtspr   SPRN_SPRG1,r13          /* save r13 */
        EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)

#endif /* CONFIG_PPC_PSERIES */

#ifdef __DISABLED__
/*
 * This is used for when the SLB miss handler has to go virtual,
 * which doesn't happen for now anymore but will once we re-implement
 * dynamic VSIDs for shared page tables
 */
slb_miss_user_pseries:
        std     r10,PACA_EXGEN+EX_R10(r13)
        std     r11,PACA_EXGEN+EX_R11(r13)
        std     r12,PACA_EXGEN+EX_R12(r13)
        mfspr   r10,SPRG1
        ld      r11,PACA_EXSLB+EX_R9(r13)
        ld      r12,PACA_EXSLB+EX_R3(r13)
        std     r10,PACA_EXGEN+EX_R13(r13)
        std     r11,PACA_EXGEN+EX_R9(r13)
        std     r12,PACA_EXGEN+EX_R3(r13)
        clrrdi  r12,r13,32
        mfmsr   r10
        mfspr   r11,SRR0                        /* save SRR0 */
        ori     r12,r12,slb_miss_user_common@l  /* virt addr of handler */
        ori     r10,r10,MSR_IR|MSR_DR|MSR_RI
        mtspr   SRR0,r12
        mfspr   r12,SRR1                        /* and SRR1 */
        mtspr   SRR1,r10
        rfid
        b       .                               /* prevent spec. execution */
#endif /* __DISABLED__ */

        .align  7
        .globl  __end_interrupts
__end_interrupts:

/*
 * Code from here down to __end_handlers is invoked from the
 * exception prologs above.  Because the prologs assemble the
 * addresses of these handlers using the LOAD_HANDLER macro,
 * which uses an addi instruction, these handlers must be in
 * the first 32k of the kernel image.
 */

/*** Common interrupt handlers ***/

        STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)

        /*
         * Machine check is different because we use a different
         * save area: PACA_EXMC instead of PACA_EXGEN.
         */
        .align  7
        .globl machine_check_common
machine_check_common:
        EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
        FINISH_NAP
        DISABLE_INTS
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .machine_check_exception
        b       .ret_from_except

        STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
        STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
        STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
        STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
        STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
        STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
        STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
#ifdef CONFIG_ALTIVEC
        STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
#else
        STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
#endif
#ifdef CONFIG_CBE_RAS
        STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
        STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
        STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */

        .align  7
system_call_entry:
        b       system_call_common

/*
 * Here we have detected that the kernel stack pointer is bad.
 * R9 contains the saved CR, r13 points to the paca,
 * r10 contains the (bad) kernel stack pointer,
 * r11 and r12 contain the saved SRR0 and SRR1.
 * We switch to using an emergency stack, save the registers there,
 * and call kernel_bad_stack(), which panics.
 */
bad_stack:
        ld      r1,PACAEMERGSP(r13)
        subi    r1,r1,64+INT_FRAME_SIZE
        std     r9,_CCR(r1)
        std     r10,GPR1(r1)
        std     r11,_NIP(r1)
        std     r12,_MSR(r1)
        mfspr   r11,SPRN_DAR
        mfspr   r12,SPRN_DSISR
        std     r11,_DAR(r1)
        std     r12,_DSISR(r1)
        mflr    r10
        mfctr   r11
        mfxer   r12
        std     r10,_LINK(r1)
        std     r11,_CTR(r1)
        std     r12,_XER(r1)
        SAVE_GPR(0,r1)
        SAVE_GPR(2,r1)
        SAVE_4GPRS(3,r1)
        SAVE_2GPRS(7,r1)
        SAVE_10GPRS(12,r1)
        SAVE_10GPRS(22,r1)
        lhz     r12,PACA_TRAP_SAVE(r13)
        std     r12,_TRAP(r1)
        addi    r11,r1,INT_FRAME_SIZE
        std     r11,0(r1)
        li      r12,0
        std     r12,0(r11)
        ld      r2,PACATOC(r13)
1:      addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .kernel_bad_stack
        b       1b

/*
 * Here r13 points to the paca, r9 contains the saved CR,
 * SRR0 and SRR1 are saved in r11 and r12,
 * r9 - r13 are saved in paca->exgen.
 */
        .align  7
        .globl data_access_common
data_access_common:
        mfspr   r10,SPRN_DAR
        std     r10,PACA_EXGEN+EX_DAR(r13)
        mfspr   r10,SPRN_DSISR
        stw     r10,PACA_EXGEN+EX_DSISR(r13)
        EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
        ld      r3,PACA_EXGEN+EX_DAR(r13)
        lwz     r4,PACA_EXGEN+EX_DSISR(r13)
        li      r5,0x300
        b       .do_hash_page           /* Try to handle as hpte fault */

        .align  7
        .globl instruction_access_common
instruction_access_common:
        EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
        ld      r3,_NIP(r1)
        andis.  r4,r12,0x5820
        li      r5,0x400
        b       .do_hash_page           /* Try to handle as hpte fault */

/*
 * Here is the common SLB miss user that is used when going to virtual
 * mode for SLB misses, that is currently not used
 */
#ifdef __DISABLED__
        .align  7
        .globl  slb_miss_user_common
slb_miss_user_common:
        mflr    r10
        std     r3,PACA_EXGEN+EX_DAR(r13)
        stw     r9,PACA_EXGEN+EX_CCR(r13)
        std     r10,PACA_EXGEN+EX_LR(r13)
        std     r11,PACA_EXGEN+EX_SRR0(r13)
        bl      .slb_allocate_user

        ld      r10,PACA_EXGEN+EX_LR(r13)
        ld      r3,PACA_EXGEN+EX_R3(r13)
        lwz     r9,PACA_EXGEN+EX_CCR(r13)
        ld      r11,PACA_EXGEN+EX_SRR0(r13)
        mtlr    r10
        beq-    slb_miss_fault

        andi.   r10,r12,MSR_RI          /* check for unrecoverable exception */
        beq-    unrecov_user_slb
        mfmsr   r10

.machine push
.machine "power4"
        mtcrf   0x80,r9
.machine pop

        clrrdi  r10,r10,2               /* clear RI before setting SRR0/1 */
        mtmsrd  r10,1

        mtspr   SRR0,r11
        mtspr   SRR1,r12

        ld      r9,PACA_EXGEN+EX_R9(r13)
        ld      r10,PACA_EXGEN+EX_R10(r13)
        ld      r11,PACA_EXGEN+EX_R11(r13)
        ld      r12,PACA_EXGEN+EX_R12(r13)
        ld      r13,PACA_EXGEN+EX_R13(r13)
        rfid
        b       .

slb_miss_fault:
        EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
        ld      r4,PACA_EXGEN+EX_DAR(r13)
        li      r5,0
        std     r4,_DAR(r1)
        std     r5,_DSISR(r1)
        b       handle_page_fault

unrecov_user_slb:
        EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
        DISABLE_INTS
        bl      .save_nvgprs
1:      addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .unrecoverable_exception
        b       1b

#endif /* __DISABLED__ */


/*
 * r13 points to the PACA, r9 contains the saved CR,
 * r12 contain the saved SRR1, SRR0 is still ready for return
 * r3 has the faulting address
 * r9 - r13 are saved in paca->exslb.
 * r3 is saved in paca->slb_r3
 * We assume we aren't going to take any exceptions during this procedure.
 */
_GLOBAL(slb_miss_realmode)
        mflr    r10
#ifdef CONFIG_RELOCATABLE
        mtctr   r11
#endif

        stw     r9,PACA_EXSLB+EX_CCR(r13)       /* save CR in exc. frame */
        std     r10,PACA_EXSLB+EX_LR(r13)       /* save LR */

        bl      .slb_allocate_realmode

        /* All done -- return from exception. */

        ld      r10,PACA_EXSLB+EX_LR(r13)
        ld      r3,PACA_EXSLB+EX_R3(r13)
        lwz     r9,PACA_EXSLB+EX_CCR(r13)       /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
        ld      r11,PACALPPACAPTR(r13)
        ld      r11,LPPACASRR0(r11)             /* get SRR0 value */
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */

        mtlr    r10

        andi.   r10,r12,MSR_RI  /* check for unrecoverable exception */
        beq-    2f

.machine        push
.machine        "power4"
        mtcrf   0x80,r9
        mtcrf   0x01,r9         /* slb_allocate uses cr0 and cr7 */
.machine        pop

#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
        mtspr   SPRN_SRR0,r11
        mtspr   SPRN_SRR1,r12
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
        ld      r9,PACA_EXSLB+EX_R9(r13)
        ld      r10,PACA_EXSLB+EX_R10(r13)
        ld      r11,PACA_EXSLB+EX_R11(r13)
        ld      r12,PACA_EXSLB+EX_R12(r13)
        ld      r13,PACA_EXSLB+EX_R13(r13)
        rfid
        b       .       /* prevent speculative execution */

2:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
        b       unrecov_slb
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
        mfspr   r11,SPRN_SRR0
        ld      r10,PACAKBASE(r13)
        LOAD_HANDLER(r10,unrecov_slb)
        mtspr   SPRN_SRR0,r10
        ld      r10,PACAKMSR(r13)
        mtspr   SPRN_SRR1,r10
        rfid
        b       .

unrecov_slb:
        EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
        DISABLE_INTS
        bl      .save_nvgprs
1:      addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .unrecoverable_exception
        b       1b

        .align  7
        .globl hardware_interrupt_common
        .globl hardware_interrupt_entry
hardware_interrupt_common:
        EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
        FINISH_NAP
hardware_interrupt_entry:
        DISABLE_INTS
BEGIN_FTR_SECTION
        bl      .ppc64_runlatch_on
END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_IRQ
        b       .ret_from_except_lite

#ifdef CONFIG_PPC_970_NAP
power4_fixup_nap:
        andc    r9,r9,r10
        std     r9,TI_LOCAL_FLAGS(r11)
        ld      r10,_LINK(r1)           /* make idle task do the */
        std     r10,_NIP(r1)            /* equivalent of a blr */
        blr
#endif

        .align  7
        .globl alignment_common
alignment_common:
        mfspr   r10,SPRN_DAR
        std     r10,PACA_EXGEN+EX_DAR(r13)
        mfspr   r10,SPRN_DSISR
        stw     r10,PACA_EXGEN+EX_DSISR(r13)
        EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
        ld      r3,PACA_EXGEN+EX_DAR(r13)
        lwz     r4,PACA_EXGEN+EX_DSISR(r13)
        std     r3,_DAR(r1)
        std     r4,_DSISR(r1)
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ENABLE_INTS
        bl      .alignment_exception
        b       .ret_from_except

        .align  7
        .globl program_check_common
program_check_common:
        EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ENABLE_INTS
        bl      .program_check_exception
        b       .ret_from_except

        .align  7
        .globl fp_unavailable_common
fp_unavailable_common:
        EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
        bne     1f                      /* if from user, just load it up */
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ENABLE_INTS
        bl      .kernel_fp_unavailable_exception
        BUG_OPCODE
1:      bl      .load_up_fpu
        b       fast_exception_return

        .align  7
        .globl altivec_unavailable_common
altivec_unavailable_common:
        EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
        beq     1f
        bl      .load_up_altivec
        b       fast_exception_return
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ENABLE_INTS
        bl      .altivec_unavailable_exception
        b       .ret_from_except

        .align  7
        .globl vsx_unavailable_common
vsx_unavailable_common:
        EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
        bne     .load_up_vsx
1:
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ENABLE_INTS
        bl      .vsx_unavailable_exception
        b       .ret_from_except

        .align  7
        .globl  __end_handlers
__end_handlers:

/*
 * Return from an exception with minimal checks.
 * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
 * If interrupts have been enabled, or anything has been
 * done that might have changed the scheduling status of
 * any task or sent any task a signal, you should use
 * ret_from_except or ret_from_except_lite instead of this.
 */
fast_exc_return_irq:                    /* restores irq state too */
        ld      r3,SOFTE(r1)
        TRACE_AND_RESTORE_IRQ(r3);
        ld      r12,_MSR(r1)
        rldicl  r4,r12,49,63            /* get MSR_EE to LSB */
        stb     r4,PACAHARDIRQEN(r13)   /* restore paca->hard_enabled */
        b       1f

        .globl  fast_exception_return
fast_exception_return:
        ld      r12,_MSR(r1)
1:      ld      r11,_NIP(r1)
        andi.   r3,r12,MSR_RI           /* check if RI is set */
        beq-    unrecov_fer

#ifdef CONFIG_VIRT_CPU_ACCOUNTING
        andi.   r3,r12,MSR_PR
        beq     2f
        ACCOUNT_CPU_USER_EXIT(r3, r4)
2:
#endif

        ld      r3,_CCR(r1)
        ld      r4,_LINK(r1)
        ld      r5,_CTR(r1)
        ld      r6,_XER(r1)
        mtcr    r3
        mtlr    r4
        mtctr   r5
        mtxer   r6
        REST_GPR(0, r1)
        REST_8GPRS(2, r1)

        mfmsr   r10
        rldicl  r10,r10,48,1            /* clear EE */
        rldicr  r10,r10,16,61           /* clear RI (LE is 0 already) */
        mtmsrd  r10,1

        mtspr   SPRN_SRR1,r12
        mtspr   SPRN_SRR0,r11
        REST_4GPRS(10, r1)
        ld      r1,GPR1(r1)
        rfid
        b       .       /* prevent speculative execution */

unrecov_fer:
        bl      .save_nvgprs
1:      addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .unrecoverable_exception
        b       1b


/*
 * Hash table stuff
 */
        .align  7
_STATIC(do_hash_page)
        std     r3,_DAR(r1)
        std     r4,_DSISR(r1)

        andis.  r0,r4,0xa450            /* weird error? */
        bne-    handle_page_fault       /* if not, try to insert a HPTE */
BEGIN_FTR_SECTION
        andis.  r0,r4,0x0020            /* Is it a segment table fault? */
        bne-    do_ste_alloc            /* If so handle it */
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)

        /*
         * On iSeries, we soft-disable interrupts here, then
         * hard-enable interrupts so that the hash_page code can spin on
         * the hash_table_lock without problems on a shared processor.
         */
        DISABLE_INTS

        /*
         * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
         * and will clobber volatile registers when irq tracing is enabled
         * so we need to reload them. It may be possible to be smarter here
         * and move the irq tracing elsewhere but let's keep it simple for
         * now
         */
#ifdef CONFIG_TRACE_IRQFLAGS
        ld      r3,_DAR(r1)
        ld      r4,_DSISR(r1)
        ld      r5,_TRAP(r1)
        ld      r12,_MSR(r1)
        clrrdi  r5,r5,4
#endif /* CONFIG_TRACE_IRQFLAGS */
        /*
         * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
         * accessing a userspace segment (even from the kernel). We assume
         * kernel addresses always have the high bit set.
         */
        rlwinm  r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
        rotldi  r0,r3,15                /* Move high bit into MSR_PR posn */
        orc     r0,r12,r0               /* MSR_PR | ~high_bit */
        rlwimi  r4,r0,32-13,30,30       /* becomes _PAGE_USER access bit */
        ori     r4,r4,1                 /* add _PAGE_PRESENT */
        rlwimi  r4,r5,22+2,31-2,31-2    /* Set _PAGE_EXEC if trap is 0x400 */

        /*
         * r3 contains the faulting address
         * r4 contains the required access permissions
         * r5 contains the trap number
         *
         * at return r3 = 0 for success
         */
        bl      .hash_page              /* build HPTE if possible */
        cmpdi   r3,0                    /* see if hash_page succeeded */

BEGIN_FW_FTR_SECTION
        /*
         * If we had interrupts soft-enabled at the point where the
         * DSI/ISI occurred, and an interrupt came in during hash_page,
         * handle it now.
         * We jump to ret_from_except_lite rather than fast_exception_return
         * because ret_from_except_lite will check for and handle pending
         * interrupts if necessary.
         */
        beq     13f
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)

BEGIN_FW_FTR_SECTION
        /*
         * Here we have interrupts hard-disabled, so it is sufficient
         * to restore paca->{soft,hard}_enable and get out.
         */
        beq     fast_exc_return_irq     /* Return from exception on success */
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)

        /* For a hash failure, we don't bother re-enabling interrupts */
        ble-    12f

        /*
         * hash_page couldn't handle it, set soft interrupt enable back
         * to what it was before the trap.  Note that .raw_local_irq_restore
         * handles any interrupts pending at this point.
         */
        ld      r3,SOFTE(r1)
        TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
        bl      .raw_local_irq_restore
        b       11f

/* Here we have a page fault that hash_page can't handle. */
handle_page_fault:
        ENABLE_INTS
11:     ld      r4,_DAR(r1)
        ld      r5,_DSISR(r1)
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      .do_page_fault
        cmpdi   r3,0
        beq+    13f
        bl      .save_nvgprs
        mr      r5,r3
        addi    r3,r1,STACK_FRAME_OVERHEAD
        lwz     r4,_DAR(r1)
        bl      .bad_page_fault
        b       .ret_from_except

13:     b       .ret_from_except_lite

/* We have a page fault that hash_page could handle but HV refused
 * the PTE insertion
 */
12:     bl      .save_nvgprs
        mr      r5,r3
        addi    r3,r1,STACK_FRAME_OVERHEAD
        ld      r4,_DAR(r1)
        bl      .low_hash_fault
        b       .ret_from_except

        /* here we have a segment miss */
do_ste_alloc:
        bl      .ste_allocate           /* try to insert stab entry */
        cmpdi   r3,0
        bne-    handle_page_fault
        b       fast_exception_return

/*
 * r13 points to the PACA, r9 contains the saved CR,
 * r11 and r12 contain the saved SRR0 and SRR1.
 * r9 - r13 are saved in paca->exslb.
 * We assume we aren't going to take any exceptions during this procedure.
 * We assume (DAR >> 60) == 0xc.
 */
        .align  7
_GLOBAL(do_stab_bolted)
        stw     r9,PACA_EXSLB+EX_CCR(r13)       /* save CR in exc. frame */
        std     r11,PACA_EXSLB+EX_SRR0(r13)     /* save SRR0 in exc. frame */

        /* Hash to the primary group */
        ld      r10,PACASTABVIRT(r13)
        mfspr   r11,SPRN_DAR
        srdi    r11,r11,28
        rldimi  r10,r11,7,52    /* r10 = first ste of the group */

        /* Calculate VSID */
        /* This is a kernel address, so protovsid = ESID */
        ASM_VSID_SCRAMBLE(r11, r9, 256M)
        rldic   r9,r11,12,16    /* r9 = vsid << 12 */

        /* Search the primary group for a free entry */
1:      ld      r11,0(r10)      /* Test valid bit of the current ste    */
        andi.   r11,r11,0x80
        beq     2f
        addi    r10,r10,16
        andi.   r11,r10,0x70
        bne     1b

        /* Stick for only searching the primary group for now.          */
        /* At least for now, we use a very simple random castout scheme */
        /* Use the TB as a random number ;  OR in 1 to avoid entry 0    */
        mftb    r11
        rldic   r11,r11,4,57    /* r11 = (r11 << 4) & 0x70 */
        ori     r11,r11,0x10

        /* r10 currently points to an ste one past the group of interest */
        /* make it point to the randomly selected entry                 */
        subi    r10,r10,128
        or      r10,r10,r11     /* r10 is the entry to invalidate       */

        isync                   /* mark the entry invalid               */
        ld      r11,0(r10)
        rldicl  r11,r11,56,1    /* clear the valid bit */
        rotldi  r11,r11,8
        std     r11,0(r10)
        sync

        clrrdi  r11,r11,28      /* Get the esid part of the ste         */
        slbie   r11

2:      std     r9,8(r10)       /* Store the vsid part of the ste       */
        eieio

        mfspr   r11,SPRN_DAR            /* Get the new esid                     */
        clrrdi  r11,r11,28      /* Permits a full 32b of ESID           */
        ori     r11,r11,0x90    /* Turn on valid and kp                 */
        std     r11,0(r10)      /* Put new entry back into the stab     */

        sync

        /* All done -- return from exception. */
        lwz     r9,PACA_EXSLB+EX_CCR(r13)       /* get saved CR */
        ld      r11,PACA_EXSLB+EX_SRR0(r13)     /* get saved SRR0 */

        andi.   r10,r12,MSR_RI
        beq-    unrecov_slb

        mtcrf   0x80,r9                 /* restore CR */

        mfmsr   r10
        clrrdi  r10,r10,2
        mtmsrd  r10,1

        mtspr   SPRN_SRR0,r11
        mtspr   SPRN_SRR1,r12
        ld      r9,PACA_EXSLB+EX_R9(r13)
        ld      r10,PACA_EXSLB+EX_R10(r13)
        ld      r11,PACA_EXSLB+EX_R11(r13)
        ld      r12,PACA_EXSLB+EX_R12(r13)
        ld      r13,PACA_EXSLB+EX_R13(r13)
        rfid
        b       .       /* prevent speculative execution */

/*
 * Space for CPU0's segment table.
 *
 * On iSeries, the hypervisor must fill in at least one entry before
 * we get control (with relocate on).  The address is given to the hv
 * as a page number (see xLparMap below), so this must be at a
 * fixed address (the linker can't compute (u64)&initial_stab >>
 * PAGE_SHIFT).
 */
        . = STAB0_OFFSET        /* 0x6000 */
        .globl initial_stab
initial_stab:
        .space  4096

#ifdef CONFIG_PPC_PSERIES
/*
 * Data area reserved for FWNMI option.
 * This address (0x7000) is fixed by the RPA.
 */
        .= 0x7000
        .globl fwnmi_data_area
fwnmi_data_area:
#endif /* CONFIG_PPC_PSERIES */

        /* iSeries does not use the FWNMI stuff, so it is safe to put
         * this here, even if we later allow kernels that will boot on
         * both pSeries and iSeries */
#ifdef CONFIG_PPC_ISERIES
        . = LPARMAP_PHYS
        .globl xLparMap
xLparMap:
        .quad   HvEsidsToMap            /* xNumberEsids */
        .quad   HvRangesToMap           /* xNumberRanges */
        .quad   STAB0_PAGE              /* xSegmentTableOffs */
        .zero   40                      /* xRsvd */
        /* xEsids (HvEsidsToMap entries of 2 quads) */
        .quad   PAGE_OFFSET_ESID        /* xKernelEsid */
        .quad   PAGE_OFFSET_VSID        /* xKernelVsid */
        .quad   VMALLOC_START_ESID      /* xKernelEsid */
        .quad   VMALLOC_START_VSID      /* xKernelVsid */
        /* xRanges (HvRangesToMap entries of 3 quads) */
        .quad   HvPagesToMap            /* xPages */
        .quad   0                       /* xOffset */
        .quad   PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */

#endif /* CONFIG_PPC_ISERIES */

#ifdef CONFIG_PPC_PSERIES
        . = 0x8000
#endif /* CONFIG_PPC_PSERIES */