arch/powerpc/platforms/85xx/ge_imp3a.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * GE IMP3A Board Setup
   4  *
   5  * Author Martyn Welch <martyn.welch@ge.com>
   6  *
   7  * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
   8  *
   9  * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
  10  * Copyright 2007 Freescale Semiconductor Inc.
  11  */
  12
  13 #include <linux/stddef.h>
  14 #include <linux/kernel.h>
  15 #include <linux/pci.h>
  16 #include <linux/kdev_t.h>
  17 #include <linux/delay.h>
  18 #include <linux/seq_file.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/of_platform.h>
  21
  22 #include <asm/time.h>
  23 #include <asm/machdep.h>
  24 #include <asm/pci-bridge.h>
  25 #include <mm/mmu_decl.h>
  26 #include <asm/prom.h>
  27 #include <asm/udbg.h>
  28 #include <asm/mpic.h>
  29 #include <asm/swiotlb.h>
  30 #include <asm/nvram.h>
  31
  32 #include <sysdev/fsl_soc.h>
  33 #include <sysdev/fsl_pci.h>
  34 #include "smp.h"
  35
  36 #include "mpc85xx.h"
  37 #include <sysdev/ge/ge_pic.h>
  38
  39 void __iomem *imp3a_regs;
  40
  41 void __init ge_imp3a_pic_init(void)
  42 {
  43         struct mpic *mpic;
  44         struct device_node *np;
  45         struct device_node *cascade_node = NULL;
  46
  47         if (of_machine_is_compatible("fsl,MPC8572DS-CAMP")) {
  48                 mpic = mpic_alloc(NULL, 0,
  49                         MPIC_NO_RESET |
  50                         MPIC_BIG_ENDIAN |
  51                         MPIC_SINGLE_DEST_CPU,
  52                         0, 256, " OpenPIC  ");
  53         } else {
  54                 mpic = mpic_alloc(NULL, 0,
  55                           MPIC_BIG_ENDIAN |
  56                           MPIC_SINGLE_DEST_CPU,
  57                         0, 256, " OpenPIC  ");
  58         }
  59
  60         BUG_ON(mpic == NULL);
  61         mpic_init(mpic);
  62         /*
  63          * There is a simple interrupt handler in the main FPGA, this needs
  64          * to be cascaded into the MPIC
  65          */
  66         for_each_node_by_type(np, "interrupt-controller")
  67                 if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
  68                         cascade_node = np;
  69                         break;
  70                 }
  71
  72         if (cascade_node == NULL) {
  73                 printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
  74                 return;
  75         }
  76
  77         gef_pic_init(cascade_node);
  78         of_node_put(cascade_node);
  79 }
  80
  81 static void ge_imp3a_pci_assign_primary(void)
  82 {
  83 #ifdef CONFIG_PCI
  84         struct device_node *np;
  85         struct resource rsrc;
  86
  87         for_each_node_by_type(np, "pci") {
  88                 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
  89                     of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
  90                     of_device_is_compatible(np, "fsl,p2020-pcie")) {
  91                         of_address_to_resource(np, 0, &rsrc);
  92                         if ((rsrc.start & 0xfffff) == 0x9000)
  93                                 fsl_pci_primary = np;
  94                 }
  95         }
  96 #endif
  97 }
  98
  99 /*
 100  * Setup the architecture
 101  */
 102 static void __init ge_imp3a_setup_arch(void)
 103 {
 104         struct device_node *regs;
 105
 106         if (ppc_md.progress)
 107                 ppc_md.progress("ge_imp3a_setup_arch()", 0);
 108
 109         mpc85xx_smp_init();
 110
 111         ge_imp3a_pci_assign_primary();
 112
 113         swiotlb_detect_4g();
 114
 115         /* Remap basic board registers */
 116         regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
 117         if (regs) {
 118                 imp3a_regs = of_iomap(regs, 0);
 119                 if (imp3a_regs == NULL)
 120                         printk(KERN_WARNING "Unable to map board registers\n");
 121                 of_node_put(regs);
 122         }
 123
 124 #if defined(CONFIG_MMIO_NVRAM)
 125         mmio_nvram_init();
 126 #endif
 127
 128         printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
 129 }
 130
 131 /* Return the PCB revision */
 132 static unsigned int ge_imp3a_get_pcb_rev(void)
 133 {
 134         unsigned int reg;
 135
 136         reg = ioread16(imp3a_regs);
 137         return (reg >> 8) & 0xff;
 138 }
 139
 140 /* Return the board (software) revision */
 141 static unsigned int ge_imp3a_get_board_rev(void)
 142 {
 143         unsigned int reg;
 144
 145         reg = ioread16(imp3a_regs + 0x2);
 146         return reg & 0xff;
 147 }
 148
 149 /* Return the FPGA revision */
 150 static unsigned int ge_imp3a_get_fpga_rev(void)
 151 {
 152         unsigned int reg;
 153
 154         reg = ioread16(imp3a_regs + 0x2);
 155         return (reg >> 8) & 0xff;
 156 }
 157
 158 /* Return compactPCI Geographical Address */
 159 static unsigned int ge_imp3a_get_cpci_geo_addr(void)
 160 {
 161         unsigned int reg;
 162
 163         reg = ioread16(imp3a_regs + 0x6);
 164         return (reg & 0x0f00) >> 8;
 165 }
 166
 167 /* Return compactPCI System Controller Status */
 168 static unsigned int ge_imp3a_get_cpci_is_syscon(void)
 169 {
 170         unsigned int reg;
 171
 172         reg = ioread16(imp3a_regs + 0x6);
 173         return reg & (1 << 12);
 174 }
 175
 176 static void ge_imp3a_show_cpuinfo(struct seq_file *m)
 177 {
 178         seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 179
 180         seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
 181                 ('A' + ge_imp3a_get_board_rev() - 1));
 182
 183         seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
 184
 185         seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
 186
 187         seq_printf(m, "cPCI syscon\t: %s\n",
 188                 ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
 189 }
 190
 191 /*
 192  * Called very early, device-tree isn't unflattened
 193  */
 194 static int __init ge_imp3a_probe(void)
 195 {
 196         return of_machine_is_compatible("ge,IMP3A");
 197 }
 198
 199 machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 200
 201 define_machine(ge_imp3a) {
 202         .name                   = "GE_IMP3A",
 203         .probe                  = ge_imp3a_probe,
 204         .setup_arch             = ge_imp3a_setup_arch,
 205         .init_IRQ               = ge_imp3a_pic_init,
 206         .show_cpuinfo           = ge_imp3a_show_cpuinfo,
 207 #ifdef CONFIG_PCI
 208         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 209         .pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 210 #endif
 211         .get_irq                = mpic_get_irq,
 212         .calibrate_decr         = generic_calibrate_decr,
 213         .progress               = udbg_progress,
 214 };