2 * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
5 * Author: Andy Fleming <afleming@freescale.com>
7 * Based on 83xx/mpc8360e_pb.c by:
8 * Li Yang <LeoLi@freescale.com>
9 * Yin Olivia <Hong-hua.Yin@freescale.com>
12 * MPC85xx MDS board specific routines.
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 #include <linux/stddef.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/errno.h>
24 #include <linux/reboot.h>
25 #include <linux/pci.h>
26 #include <linux/kdev_t.h>
27 #include <linux/major.h>
28 #include <linux/console.h>
29 #include <linux/delay.h>
30 #include <linux/seq_file.h>
31 #include <linux/initrd.h>
32 #include <linux/fsl_devices.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_device.h>
35 #include <linux/phy.h>
36 #include <linux/memblock.h>
37 #include <linux/fsl/guts.h>
39 #include <linux/atomic.h>
42 #include <asm/machdep.h>
43 #include <asm/pci-bridge.h>
45 #include <mm/mmu_decl.h>
48 #include <sysdev/fsl_soc.h>
49 #include <sysdev/fsl_pci.h>
50 #include <sysdev/simple_gpio.h>
51 #include <soc/fsl/qe/qe.h>
52 #include <soc/fsl/qe/qe_ic.h>
54 #include <asm/swiotlb.h>
61 #define DBG(fmt...) udbg_printf(fmt)
66 #if IS_BUILTIN(CONFIG_PHYLIB)
68 #define MV88E1111_SCR 0x10
69 #define MV88E1111_SCR_125CLK 0x0010
70 static int mpc8568_fixup_125_clock(struct phy_device
*phydev
)
75 /* Workaround for the 125 CLK Toggle */
76 scr
= phy_read(phydev
, MV88E1111_SCR
);
81 err
= phy_write(phydev
, MV88E1111_SCR
, scr
& ~(MV88E1111_SCR_125CLK
));
86 err
= phy_write(phydev
, MII_BMCR
, BMCR_RESET
);
91 scr
= phy_read(phydev
, MV88E1111_SCR
);
96 err
= phy_write(phydev
, MV88E1111_SCR
, scr
| 0x0008);
101 static int mpc8568_mds_phy_fixups(struct phy_device
*phydev
)
107 err
= phy_write(phydev
,29, 0x0006);
112 temp
= phy_read(phydev
, 30);
117 temp
= (temp
& (~0x8000)) | 0x4000;
118 err
= phy_write(phydev
,30, temp
);
123 err
= phy_write(phydev
,29, 0x000a);
128 temp
= phy_read(phydev
, 30);
133 temp
= phy_read(phydev
, 30);
140 err
= phy_write(phydev
,30,temp
);
145 /* Disable automatic MDI/MDIX selection */
146 temp
= phy_read(phydev
, 16);
152 err
= phy_write(phydev
,16,temp
);
159 /* ************************************************************************
161 * Setup the architecture
164 #ifdef CONFIG_QUICC_ENGINE
165 static void __init
mpc85xx_mds_reset_ucc_phys(void)
167 struct device_node
*np
;
168 static u8 __iomem
*bcsr_regs
;
171 np
= of_find_node_by_name(NULL
, "bcsr");
175 bcsr_regs
= of_iomap(np
, 0);
180 if (machine_is(mpc8568_mds
)) {
181 #define BCSR_UCC1_GETH_EN (0x1 << 7)
182 #define BCSR_UCC2_GETH_EN (0x1 << 7)
183 #define BCSR_UCC1_MODE_MSK (0x3 << 4)
184 #define BCSR_UCC2_MODE_MSK (0x3 << 0)
186 /* Turn off UCC1 & UCC2 */
187 clrbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
188 clrbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
190 /* Mode is RGMII, all bits clear */
191 clrbits8(&bcsr_regs
[11], BCSR_UCC1_MODE_MSK
|
194 /* Turn UCC1 & UCC2 on */
195 setbits8(&bcsr_regs
[8], BCSR_UCC1_GETH_EN
);
196 setbits8(&bcsr_regs
[9], BCSR_UCC2_GETH_EN
);
197 } else if (machine_is(mpc8569_mds
)) {
198 #define BCSR7_UCC12_GETHnRST (0x1 << 2)
199 #define BCSR8_UEM_MARVELL_RST (0x1 << 1)
200 #define BCSR_UCC_RGMII (0x1 << 6)
201 #define BCSR_UCC_RTBI (0x1 << 5)
203 * U-Boot mangles interrupt polarity for Marvell PHYs,
204 * so reset built-in and UEM Marvell PHYs, this puts
205 * the PHYs into their normal state.
207 clrbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
208 setbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
210 setbits8(&bcsr_regs
[7], BCSR7_UCC12_GETHnRST
);
211 clrbits8(&bcsr_regs
[8], BCSR8_UEM_MARVELL_RST
);
213 for_each_compatible_node(np
, "network", "ucc_geth") {
214 const unsigned int *prop
;
217 prop
= of_get_property(np
, "cell-index", NULL
);
223 prop
= of_get_property(np
, "phy-connection-type", NULL
);
227 if (strcmp("rtbi", (const char *)prop
) == 0)
228 clrsetbits_8(&bcsr_regs
[7 + ucc_num
],
229 BCSR_UCC_RGMII
, BCSR_UCC_RTBI
);
231 } else if (machine_is(p1021_mds
)) {
232 #define BCSR11_ENET_MICRST (0x1 << 5)
233 /* Reset Micrel PHY */
234 clrbits8(&bcsr_regs
[11], BCSR11_ENET_MICRST
);
235 setbits8(&bcsr_regs
[11], BCSR11_ENET_MICRST
);
241 static void __init
mpc85xx_mds_qe_init(void)
243 struct device_node
*np
;
246 mpc85xx_qe_par_io_init();
247 mpc85xx_mds_reset_ucc_phys();
249 if (machine_is(p1021_mds
)) {
251 struct ccsr_guts __iomem
*guts
;
253 np
= of_find_node_by_name(NULL
, "global-utilities");
255 guts
= of_iomap(np
, 0);
257 pr_err("mpc85xx-rdb: could not map global utilities register\n");
259 /* P1021 has pins muxed for QE and other functions. To
260 * enable QE UEC mode, we need to set bit QE0 for UCC1
261 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
262 * and QE12 for QE MII management signals in PMUXCR
265 setbits32(&guts
->pmuxcr
, MPC85xx_PMUXCR_QE(0) |
266 MPC85xx_PMUXCR_QE(3) |
267 MPC85xx_PMUXCR_QE(9) |
268 MPC85xx_PMUXCR_QE(12));
277 static void __init
mpc85xx_mds_qeic_init(void)
279 struct device_node
*np
;
281 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe");
282 if (!of_device_is_available(np
)) {
287 np
= of_find_compatible_node(NULL
, NULL
, "fsl,qe-ic");
289 np
= of_find_node_by_type(NULL
, "qeic");
294 if (machine_is(p1021_mds
))
295 qe_ic_init(np
, 0, qe_ic_cascade_low_mpic
,
296 qe_ic_cascade_high_mpic
);
298 qe_ic_init(np
, 0, qe_ic_cascade_muxed_mpic
, NULL
);
302 static void __init
mpc85xx_mds_qe_init(void) { }
303 static void __init
mpc85xx_mds_qeic_init(void) { }
304 #endif /* CONFIG_QUICC_ENGINE */
306 static void __init
mpc85xx_mds_setup_arch(void)
309 ppc_md
.progress("mpc85xx_mds_setup_arch()", 0);
313 mpc85xx_mds_qe_init();
315 fsl_pci_assign_primary();
320 #if IS_BUILTIN(CONFIG_PHYLIB)
322 static int __init
board_fixups(void)
325 char *compstrs
[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
326 struct device_node
*mdio
;
330 for (i
= 0; i
< ARRAY_SIZE(compstrs
); i
++) {
331 mdio
= of_find_compatible_node(NULL
, NULL
, compstrs
[i
]);
333 of_address_to_resource(mdio
, 0, &res
);
334 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
335 (unsigned long long)res
.start
, 1);
337 phy_register_fixup_for_id(phy_id
, mpc8568_fixup_125_clock
);
338 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
340 /* Register a workaround for errata */
341 snprintf(phy_id
, sizeof(phy_id
), "%llx:%02x",
342 (unsigned long long)res
.start
, 7);
343 phy_register_fixup_for_id(phy_id
, mpc8568_mds_phy_fixups
);
351 machine_arch_initcall(mpc8568_mds
, board_fixups
);
352 machine_arch_initcall(mpc8569_mds
, board_fixups
);
356 static int __init
mpc85xx_publish_devices(void)
358 if (machine_is(mpc8568_mds
))
359 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
360 if (machine_is(mpc8569_mds
))
361 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
363 return mpc85xx_common_publish_devices();
366 machine_arch_initcall(mpc8568_mds
, mpc85xx_publish_devices
);
367 machine_arch_initcall(mpc8569_mds
, mpc85xx_publish_devices
);
368 machine_arch_initcall(p1021_mds
, mpc85xx_common_publish_devices
);
370 static void __init
mpc85xx_mds_pic_init(void)
372 struct mpic
*mpic
= mpic_alloc(NULL
, 0, MPIC_BIG_ENDIAN
|
373 MPIC_SINGLE_DEST_CPU
,
374 0, 256, " OpenPIC ");
375 BUG_ON(mpic
== NULL
);
378 mpc85xx_mds_qeic_init();
381 static int __init
mpc85xx_mds_probe(void)
383 return of_machine_is_compatible("MPC85xxMDS");
386 define_machine(mpc8568_mds
) {
387 .name
= "MPC8568 MDS",
388 .probe
= mpc85xx_mds_probe
,
389 .setup_arch
= mpc85xx_mds_setup_arch
,
390 .init_IRQ
= mpc85xx_mds_pic_init
,
391 .get_irq
= mpic_get_irq
,
392 .calibrate_decr
= generic_calibrate_decr
,
393 .progress
= udbg_progress
,
395 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
396 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,
400 static int __init
mpc8569_mds_probe(void)
402 return of_machine_is_compatible("fsl,MPC8569EMDS");
405 define_machine(mpc8569_mds
) {
406 .name
= "MPC8569 MDS",
407 .probe
= mpc8569_mds_probe
,
408 .setup_arch
= mpc85xx_mds_setup_arch
,
409 .init_IRQ
= mpc85xx_mds_pic_init
,
410 .get_irq
= mpic_get_irq
,
411 .calibrate_decr
= generic_calibrate_decr
,
412 .progress
= udbg_progress
,
414 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
415 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,
419 static int __init
p1021_mds_probe(void)
421 return of_machine_is_compatible("fsl,P1021MDS");
425 define_machine(p1021_mds
) {
427 .probe
= p1021_mds_probe
,
428 .setup_arch
= mpc85xx_mds_setup_arch
,
429 .init_IRQ
= mpc85xx_mds_pic_init
,
430 .get_irq
= mpic_get_irq
,
431 .calibrate_decr
= generic_calibrate_decr
,
432 .progress
= udbg_progress
,
434 .pcibios_fixup_bus
= fsl_pcibios_fixup_bus
,
435 .pcibios_fixup_phb
= fsl_pcibios_fixup_phb
,