maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault

[mirror_ubuntu-jammy-kernel.git] / arch / powerpc / sysdev / fsl_pci.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * MPC83xx/85xx/86xx PCI/PCIE support routing.
 *
 * Copyright 2007-2012 Freescale Semiconductor, Inc.
 * Copyright 2008-2009 MontaVista Software, Inc.
 *
 * Initial author: Xianghua Xiao <x.xiao@freescale.com>
 * Recode: ZHANG WEI <wei.zhang@freescale.com>
 * Rewrite the routing for Frescale PCI and PCI Express
 *      Roy Zang <tie-fei.zang@freescale.com>
 * MPC83xx PCI-Express support:
 *      Tony Li <tony.li@freescale.com>
 *      Anton Vorontsov <avorontsov@ru.mvista.com>
 */
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/fsl/edac.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/memblock.h>
#include <linux/log2.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/uaccess.h>

#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/machdep.h>
#include <asm/mpc85xx.h>
#include <asm/disassemble.h>
#include <asm/ppc-opcode.h>
#include <asm/swiotlb.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>

static int fsl_pcie_bus_fixup, is_mpc83xx_pci;

static void quirk_fsl_pcie_early(struct pci_dev *dev)
{
        u8 hdr_type;

        /* if we aren't a PCIe don't bother */
        if (!pci_is_pcie(dev))
                return;

        /* if we aren't in host mode don't bother */
        pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
        if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
                return;

        dev->class = PCI_CLASS_BRIDGE_PCI << 8;
        fsl_pcie_bus_fixup = 1;
        return;
}

static int fsl_indirect_read_config(struct pci_bus *, unsigned int,
                                    int, int, u32 *);

static int fsl_pcie_check_link(struct pci_controller *hose)
{
        u32 val = 0;

        if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
                if (hose->ops->read == fsl_indirect_read_config)
                        __indirect_read_config(hose, hose->first_busno, 0,
                                               PCIE_LTSSM, 4, &val);
                else
                        early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
                if (val < PCIE_LTSSM_L0)
                        return 1;
        } else {
                struct ccsr_pci __iomem *pci = hose->private_data;
                /* for PCIe IP rev 3.0 or greater use CSR0 for link state */
                val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK)
                                >> PEX_CSR0_LTSSM_SHIFT;
                if (val != PEX_CSR0_LTSSM_L0)
                        return 1;
        }

        return 0;
}

static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
                                    int offset, int len, u32 *val)
{
        struct pci_controller *hose = pci_bus_to_host(bus);

        if (fsl_pcie_check_link(hose))
                hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
        else
                hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;

        return indirect_read_config(bus, devfn, offset, len, val);
}

#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)

static struct pci_ops fsl_indirect_pcie_ops =
{
        .read = fsl_indirect_read_config,
        .write = indirect_write_config,
};

static u64 pci64_dma_offset;

#ifdef CONFIG_SWIOTLB
static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
{
        struct pci_controller *hose = pci_bus_to_host(pdev->bus);

        pdev->dev.bus_dma_limit =
                hose->dma_window_base_cur + hose->dma_window_size - 1;
}

static void setup_swiotlb_ops(struct pci_controller *hose)
{
        if (ppc_swiotlb_enable)
                hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#else
static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
#endif

static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
{
        /*
         * Fix up PCI devices that are able to DMA to the large inbound
         * mapping that allows addressing any RAM address from across PCI.
         */
        if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
                dev->bus_dma_limit = 0;
                dev->archdata.dma_offset = pci64_dma_offset;
        }
}

static int setup_one_atmu(struct ccsr_pci __iomem *pci,
        unsigned int index, const struct resource *res,
        resource_size_t offset)
{
        resource_size_t pci_addr = res->start - offset;
        resource_size_t phys_addr = res->start;
        resource_size_t size = resource_size(res);
        u32 flags = 0x80044000; /* enable & mem R/W */
        unsigned int i;

        pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
                (u64)res->start, (u64)size);

        if (res->flags & IORESOURCE_PREFETCH)
                flags |= 0x10000000; /* enable relaxed ordering */

        for (i = 0; size > 0; i++) {
                unsigned int bits = min_t(u32, ilog2(size),
                                        __ffs(pci_addr | phys_addr));

                if (index + i >= 5)
                        return -1;

                out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
                out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
                out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
                out_be32(&pci->pow[index + i].powar, flags | (bits - 1));

                pci_addr += (resource_size_t)1U << bits;
                phys_addr += (resource_size_t)1U << bits;
                size -= (resource_size_t)1U << bits;
        }

        return i;
}

static bool is_kdump(void)
{
        struct device_node *node;

        node = of_find_node_by_type(NULL, "memory");
        if (!node) {
                WARN_ON_ONCE(1);
                return false;
        }

        return of_property_read_bool(node, "linux,usable-memory");
}

/* atmu setup for fsl pci/pcie controller */
static void setup_pci_atmu(struct pci_controller *hose)
{
        struct ccsr_pci __iomem *pci = hose->private_data;
        int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4;
        u64 mem, sz, paddr_hi = 0;
        u64 offset = 0, paddr_lo = ULLONG_MAX;
        u32 pcicsrbar = 0, pcicsrbar_sz;
        u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
                        PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
        const u64 *reg;
        int len;
        bool setup_inbound;

        /*
         * If this is kdump, we don't want to trigger a bunch of PCI
         * errors by closing the window on in-flight DMA.
         *
         * We still run most of the function's logic so that things like
         * hose->dma_window_size still get set.
         */
        setup_inbound = !is_kdump();

        if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) {
                /*
                 * BSC9132 Rev1.0 has an issue where all the PEX inbound
                 * windows have implemented the default target value as 0xf
                 * for CCSR space.In all Freescale legacy devices the target
                 * of 0xf is reserved for local memory space. 9132 Rev1.0
                 * now has local mempry space mapped to target 0x0 instead of
                 * 0xf. Hence adding a workaround to remove the target 0xf
                 * defined for memory space from Inbound window attributes.
                 */
                piwar &= ~PIWAR_TGI_LOCAL;
        }

        if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
                if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
                        win_idx = 2;
                        start_idx = 0;
                        end_idx = 3;
                }
        }

        /* Disable all windows (except powar0 since it's ignored) */
        for(i = 1; i < 5; i++)
                out_be32(&pci->pow[i].powar, 0);

        if (setup_inbound) {
                for (i = start_idx; i < end_idx; i++)
                        out_be32(&pci->piw[i].piwar, 0);
        }

        /* Setup outbound MEM window */
        for(i = 0, j = 1; i < 3; i++) {
                if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
                        continue;

                paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
                paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);

                /* We assume all memory resources have the same offset */
                offset = hose->mem_offset[i];
                n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset);

                if (n < 0 || j >= 5) {
                        pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
                        hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
                } else
                        j += n;
        }

        /* Setup outbound IO window */
        if (hose->io_resource.flags & IORESOURCE_IO) {
                if (j >= 5) {
                        pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
                } else {
                        pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
                                 "phy base 0x%016llx.\n",
                                 (u64)hose->io_resource.start,
                                 (u64)resource_size(&hose->io_resource),
                                 (u64)hose->io_base_phys);
                        out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
                        out_be32(&pci->pow[j].potear, 0);
                        out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
                        /* Enable, IO R/W */
                        out_be32(&pci->pow[j].powar, 0x80088000
                                | (ilog2(hose->io_resource.end
                                - hose->io_resource.start + 1) - 1));
                }
        }

        /* convert to pci address space */
        paddr_hi -= offset;
        paddr_lo -= offset;

        if (paddr_hi == paddr_lo) {
                pr_err("%pOF: No outbound window space\n", hose->dn);
                return;
        }

        if (paddr_lo == 0) {
                pr_err("%pOF: No space for inbound window\n", hose->dn);
                return;
        }

        /* setup PCSRBAR/PEXCSRBAR */
        early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
        early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
        pcicsrbar_sz = ~pcicsrbar_sz + 1;

        if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
                (paddr_lo > 0x100000000ull))
                pcicsrbar = 0x100000000ull - pcicsrbar_sz;
        else
                pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
        early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);

        paddr_lo = min(paddr_lo, (u64)pcicsrbar);

        pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar);

        /* Setup inbound mem window */
        mem = memblock_end_of_DRAM();
        pr_info("%s: end of DRAM %llx\n", __func__, mem);

        /*
         * The msi-address-64 property, if it exists, indicates the physical
         * address of the MSIIR register.  Normally, this register is located
         * inside CCSR, so the ATMU that covers all of CCSR is used. But if
         * this property exists, then we normally need to create a new ATMU
         * for it.  For now, however, we cheat.  The only entity that creates
         * this property is the Freescale hypervisor, and the address is
         * specified in the partition configuration.  Typically, the address
         * is located in the page immediately after the end of DDR.  If so, we
         * can avoid allocating a new ATMU by extending the DDR ATMU by one
         * page.
         */
        reg = of_get_property(hose->dn, "msi-address-64", &len);
        if (reg && (len == sizeof(u64))) {
                u64 address = be64_to_cpup(reg);

                if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
                        pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn);
                        mem += PAGE_SIZE;
                } else {
                        /* TODO: Create a new ATMU for MSIIR */
                        pr_warn("%pOF: msi-address-64 address of %llx is "
                                "unsupported\n", hose->dn, address);
                }
        }

        sz = min(mem, paddr_lo);
        mem_log = ilog2(sz);

        /* PCIe can overmap inbound & outbound since RX & TX are separated */
        if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
                /* Size window to exact size if power-of-two or one size up */
                if ((1ull << mem_log) != mem) {
                        mem_log++;
                        if ((1ull << mem_log) > mem)
                                pr_info("%pOF: Setting PCI inbound window "
                                        "greater than memory size\n", hose->dn);
                }

                piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);

                if (setup_inbound) {
                        /* Setup inbound memory window */
                        out_be32(&pci->piw[win_idx].pitar,  0x00000000);
                        out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
                        out_be32(&pci->piw[win_idx].piwar,  piwar);
                }

                win_idx--;
                hose->dma_window_base_cur = 0x00000000;
                hose->dma_window_size = (resource_size_t)sz;

                /*
                 * if we have >4G of memory setup second PCI inbound window to
                 * let devices that are 64-bit address capable to work w/o
                 * SWIOTLB and access the full range of memory
                 */
                if (sz != mem) {
                        mem_log = ilog2(mem);

                        /* Size window up if we dont fit in exact power-of-2 */
                        if ((1ull << mem_log) != mem)
                                mem_log++;

                        piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
                        pci64_dma_offset = 1ULL << mem_log;

                        if (setup_inbound) {
                                /* Setup inbound memory window */
                                out_be32(&pci->piw[win_idx].pitar,  0x00000000);
                                out_be32(&pci->piw[win_idx].piwbear,
                                                pci64_dma_offset >> 44);
                                out_be32(&pci->piw[win_idx].piwbar,
                                                pci64_dma_offset >> 12);
                                out_be32(&pci->piw[win_idx].piwar,  piwar);
                        }

                        /*
                         * install our own dma_set_mask handler to fixup dma_ops
                         * and dma_offset
                         */
                        ppc_md.dma_set_mask = fsl_pci_dma_set_mask;

                        pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn);
                }
        } else {
                u64 paddr = 0;

                if (setup_inbound) {
                        /* Setup inbound memory window */
                        out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
                        out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
                        out_be32(&pci->piw[win_idx].piwar,
                                 (piwar | (mem_log - 1)));
                }

                win_idx--;
                paddr += 1ull << mem_log;
                sz -= 1ull << mem_log;

                if (sz) {
                        mem_log = ilog2(sz);
                        piwar |= (mem_log - 1);

                        if (setup_inbound) {
                                out_be32(&pci->piw[win_idx].pitar,
                                         paddr >> 12);
                                out_be32(&pci->piw[win_idx].piwbar,
                                         paddr >> 12);
                                out_be32(&pci->piw[win_idx].piwar, piwar);
                        }

                        win_idx--;
                        paddr += 1ull << mem_log;
                }

                hose->dma_window_base_cur = 0x00000000;
                hose->dma_window_size = (resource_size_t)paddr;
        }

        if (hose->dma_window_size < mem) {
#ifdef CONFIG_SWIOTLB
                ppc_swiotlb_enable = 1;
#else
                pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to "
                        "map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
                         hose->dn);
#endif
                /* adjusting outbound windows could reclaim space in mem map */
                if (paddr_hi < 0xffffffffull)
                        pr_warn("%pOF: WARNING: Outbound window cfg leaves "
                                "gaps in memory map. Adjusting the memory map "
                                "could reduce unnecessary bounce buffering.\n",
                                hose->dn);

                pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn,
                        (u64)hose->dma_window_size);
        }
}

static void __init setup_pci_cmd(struct pci_controller *hose)
{
        u16 cmd;
        int cap_x;

        early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
        cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
                | PCI_COMMAND_IO;
        early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);

        cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
        if (cap_x) {
                int pci_x_cmd = cap_x + PCI_X_CMD;
                cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
                        | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
                early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
        } else {
                early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
        }
}

void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
        struct pci_controller *hose = pci_bus_to_host(bus);
        int i, is_pcie = 0, no_link;

        /* The root complex bridge comes up with bogus resources,
         * we copy the PHB ones in.
         *
         * With the current generic PCI code, the PHB bus no longer
         * has bus->resource[0..4] set, so things are a bit more
         * tricky.
         */

        if (fsl_pcie_bus_fixup)
                is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
        no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);

        if (bus->parent == hose->bus && (is_pcie || no_link)) {
                for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
                        struct resource *res = bus->resource[i];
                        struct resource *par;

                        if (!res)
                                continue;
                        if (i == 0)
                                par = &hose->io_resource;
                        else if (i < 4)
                                par = &hose->mem_resources[i-1];
                        else par = NULL;

                        res->start = par ? par->start : 0;
                        res->end   = par ? par->end   : 0;
                        res->flags = par ? par->flags : 0;
                }
        }
}

int fsl_add_bridge(struct platform_device *pdev, int is_primary)
{
        int len;
        struct pci_controller *hose;
        struct resource rsrc;
        const int *bus_range;
        u8 hdr_type, progif;
        struct device_node *dev;
        struct ccsr_pci __iomem *pci;
        u16 temp;
        u32 svr = mfspr(SPRN_SVR);

        dev = pdev->dev.of_node;

        if (!of_device_is_available(dev)) {
                pr_warn("%pOF: disabled\n", dev);
                return -ENODEV;
        }

        pr_debug("Adding PCI host bridge %pOF\n", dev);

        /* Fetch host bridge registers address */
        if (of_address_to_resource(dev, 0, &rsrc)) {
                printk(KERN_WARNING "Can't get pci register base!");
                return -ENOMEM;
        }

        /* Get bus range if any */
        bus_range = of_get_property(dev, "bus-range", &len);
        if (bus_range == NULL || len < 2 * sizeof(int))
                printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
                        " bus 0\n", dev);

        pci_add_flags(PCI_REASSIGN_ALL_BUS);
        hose = pcibios_alloc_controller(dev);
        if (!hose)
                return -ENOMEM;

        /* set platform device as the parent */
        hose->parent = &pdev->dev;
        hose->first_busno = bus_range ? bus_range[0] : 0x0;
        hose->last_busno = bus_range ? bus_range[1] : 0xff;

        pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
                 (u64)rsrc.start, (u64)resource_size(&rsrc));

        pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc));
        if (!hose->private_data)
                goto no_bridge;

        setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
                           PPC_INDIRECT_TYPE_BIG_ENDIAN);

        if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
                hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;

        if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
                /* use fsl_indirect_read_config for PCIe */
                hose->ops = &fsl_indirect_pcie_ops;
                /* For PCIE read HEADER_TYPE to identify controller mode */
                early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
                if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
                        goto no_bridge;

        } else {
                /* For PCI read PROG to identify controller mode */
                early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
                if ((progif & 1) &&
                    !of_property_read_bool(dev, "fsl,pci-agent-force-enum"))
                        goto no_bridge;
        }

        setup_pci_cmd(hose);

        /* check PCI express link status */
        if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
                hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
                        PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
                if (fsl_pcie_check_link(hose))
                        hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
        } else {
                /*
                 * Set PBFR(PCI Bus Function Register)[10] = 1 to
                 * disable the combining of crossing cacheline
                 * boundary requests into one burst transaction.
                 * PCI-X operation is not affected.
                 * Fix erratum PCI 5 on MPC8548
                 */
#define PCI_BUS_FUNCTION 0x44
#define PCI_BUS_FUNCTION_MDS 0x400      /* Master disable streaming */
                if (((SVR_SOC_VER(svr) == SVR_8543) ||
                     (SVR_SOC_VER(svr) == SVR_8545) ||
                     (SVR_SOC_VER(svr) == SVR_8547) ||
                     (SVR_SOC_VER(svr) == SVR_8548)) &&
                    !early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX)) {
                        early_read_config_word(hose, 0, 0,
                                        PCI_BUS_FUNCTION, &temp);
                        temp |= PCI_BUS_FUNCTION_MDS;
                        early_write_config_word(hose, 0, 0,
                                        PCI_BUS_FUNCTION, temp);
                }
        }

        printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
                "Firmware bus number: %d->%d\n",
                (unsigned long long)rsrc.start, hose->first_busno,
                hose->last_busno);

        pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
                hose, hose->cfg_addr, hose->cfg_data);

        /* Interpret the "ranges" property */
        /* This also maps the I/O region and sets isa_io/mem_base */
        pci_process_bridge_OF_ranges(hose, dev, is_primary);

        /* Setup PEX window registers */
        setup_pci_atmu(hose);

        /* Set up controller operations */
        setup_swiotlb_ops(hose);

        return 0;

no_bridge:
        iounmap(hose->private_data);
        /* unmap cfg_data & cfg_addr separately if not on same page */
        if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
            ((unsigned long)hose->cfg_addr & PAGE_MASK))
                iounmap(hose->cfg_data);
        iounmap(hose->cfg_addr);
        pcibios_free_controller(hose);
        return -ENODEV;
}
#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */

DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
                        quirk_fsl_pcie_early);

#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
struct mpc83xx_pcie_priv {
        void __iomem *cfg_type0;
        void __iomem *cfg_type1;
        u32 dev_base;
};

struct pex_inbound_window {
        u32 ar;
        u32 tar;
        u32 barl;
        u32 barh;
};

/*
 * With the convention of u-boot, the PCIE outbound window 0 serves
 * as configuration transactions outbound.
 */
#define PEX_OUTWIN0_BAR         0xCA4
#define PEX_OUTWIN0_TAL         0xCA8
#define PEX_OUTWIN0_TAH         0xCAC
#define PEX_RC_INWIN_BASE       0xE60
#define PEX_RCIWARn_EN          0x1

static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
{
        struct pci_controller *hose = pci_bus_to_host(bus);

        if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
                return PCIBIOS_DEVICE_NOT_FOUND;
        /*
         * Workaround for the HW bug: for Type 0 configure transactions the
         * PCI-E controller does not check the device number bits and just
         * assumes that the device number bits are 0.
         */
        if (bus->number == hose->first_busno ||
                        bus->primary == hose->first_busno) {
                if (devfn & 0xf8)
                        return PCIBIOS_DEVICE_NOT_FOUND;
        }

        if (ppc_md.pci_exclude_device) {
                if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
                        return PCIBIOS_DEVICE_NOT_FOUND;
        }

        return PCIBIOS_SUCCESSFUL;
}

static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
                                            unsigned int devfn, int offset)
{
        struct pci_controller *hose = pci_bus_to_host(bus);
        struct mpc83xx_pcie_priv *pcie = hose->dn->data;
        u32 dev_base = bus->number << 24 | devfn << 16;
        int ret;

        ret = mpc83xx_pcie_exclude_device(bus, devfn);
        if (ret)
                return NULL;

        offset &= 0xfff;

        /* Type 0 */
        if (bus->number == hose->first_busno)
                return pcie->cfg_type0 + offset;

        if (pcie->dev_base == dev_base)
                goto mapped;

        out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);

        pcie->dev_base = dev_base;
mapped:
        return pcie->cfg_type1 + offset;
}

static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
                                     int offset, int len, u32 val)
{
        struct pci_controller *hose = pci_bus_to_host(bus);

        /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
        if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
                val &= 0xffffff00;

        return pci_generic_config_write(bus, devfn, offset, len, val);
}

static struct pci_ops mpc83xx_pcie_ops = {
        .map_bus = mpc83xx_pcie_remap_cfg,
        .read = pci_generic_config_read,
        .write = mpc83xx_pcie_write_config,
};

static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
                                     struct resource *reg)
{
        struct mpc83xx_pcie_priv *pcie;
        u32 cfg_bar;
        int ret = -ENOMEM;

        pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
        if (!pcie)
                return ret;

        pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
        if (!pcie->cfg_type0)
                goto err0;

        cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
        if (!cfg_bar) {
                /* PCI-E isn't configured. */
                ret = -ENODEV;
                goto err1;
        }

        pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
        if (!pcie->cfg_type1)
                goto err1;

        WARN_ON(hose->dn->data);
        hose->dn->data = pcie;
        hose->ops = &mpc83xx_pcie_ops;
        hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;

        out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
        out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);

        if (fsl_pcie_check_link(hose))
                hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;

        return 0;
err1:
        iounmap(pcie->cfg_type0);
err0:
        kfree(pcie);
        return ret;

}

int __init mpc83xx_add_bridge(struct device_node *dev)
{
        int ret;
        int len;
        struct pci_controller *hose;
        struct resource rsrc_reg;
        struct resource rsrc_cfg;
        const int *bus_range;
        int primary;

        is_mpc83xx_pci = 1;

        if (!of_device_is_available(dev)) {
                pr_warn("%pOF: disabled by the firmware.\n",
                        dev);
                return -ENODEV;
        }
        pr_debug("Adding PCI host bridge %pOF\n", dev);

        /* Fetch host bridge registers address */
        if (of_address_to_resource(dev, 0, &rsrc_reg)) {
                printk(KERN_WARNING "Can't get pci register base!\n");
                return -ENOMEM;
        }

        memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));

        if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
                printk(KERN_WARNING
                        "No pci config register base in dev tree, "
                        "using default\n");
                /*
                 * MPC83xx supports up to two host controllers
                 *      one at 0x8500 has config space registers at 0x8300
                 *      one at 0x8600 has config space registers at 0x8380
                 */
                if ((rsrc_reg.start & 0xfffff) == 0x8500)
                        rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
                else if ((rsrc_reg.start & 0xfffff) == 0x8600)
                        rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
        }
        /*
         * Controller at offset 0x8500 is primary
         */
        if ((rsrc_reg.start & 0xfffff) == 0x8500)
                primary = 1;
        else
                primary = 0;

        /* Get bus range if any */
        bus_range = of_get_property(dev, "bus-range", &len);
        if (bus_range == NULL || len < 2 * sizeof(int)) {
                printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
                       " bus 0\n", dev);
        }

        pci_add_flags(PCI_REASSIGN_ALL_BUS);
        hose = pcibios_alloc_controller(dev);
        if (!hose)
                return -ENOMEM;

        hose->first_busno = bus_range ? bus_range[0] : 0;
        hose->last_busno = bus_range ? bus_range[1] : 0xff;

        if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
                ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
                if (ret)
                        goto err0;
        } else {
                setup_indirect_pci(hose, rsrc_cfg.start,
                                   rsrc_cfg.start + 4, 0);
        }

        printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
               "Firmware bus number: %d->%d\n",
               (unsigned long long)rsrc_reg.start, hose->first_busno,
               hose->last_busno);

        pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
            hose, hose->cfg_addr, hose->cfg_data);

        /* Interpret the "ranges" property */
        /* This also maps the I/O region and sets isa_io/mem_base */
        pci_process_bridge_OF_ranges(hose, dev, primary);

        return 0;
err0:
        pcibios_free_controller(hose);
        return ret;
}
#endif /* CONFIG_PPC_83xx */

u64 fsl_pci_immrbar_base(struct pci_controller *hose)
{
#ifdef CONFIG_PPC_83xx
        if (is_mpc83xx_pci) {
                struct mpc83xx_pcie_priv *pcie = hose->dn->data;
                struct pex_inbound_window *in;
                int i;

                /* Walk the Root Complex Inbound windows to match IMMR base */
                in = pcie->cfg_type0 + PEX_RC_INWIN_BASE;
                for (i = 0; i < 4; i++) {
                        /* not enabled, skip */
                        if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN))
                                continue;

                        if (get_immrbase() == in_le32(&in[i].tar))
                                return (u64)in_le32(&in[i].barh) << 32 |
                                            in_le32(&in[i].barl);
                }

                printk(KERN_WARNING "could not find PCI BAR matching IMMR\n");
        }
#endif

#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
        if (!is_mpc83xx_pci) {
                u32 base;

                pci_bus_read_config_dword(hose->bus,
                        PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);

                /*
                 * For PEXCSRBAR, bit 3-0 indicate prefetchable and
                 * address type. So when getting base address, these
                 * bits should be masked
                 */
                base &= PCI_BASE_ADDRESS_MEM_MASK;

                return base;
        }
#endif

        return 0;
}

#ifdef CONFIG_E500
static int mcheck_handle_load(struct pt_regs *regs, u32 inst)
{
        unsigned int rd, ra, rb, d;

        rd = get_rt(inst);
        ra = get_ra(inst);
        rb = get_rb(inst);
        d = get_d(inst);

        switch (get_op(inst)) {
        case 31:
                switch (get_xop(inst)) {
                case OP_31_XOP_LWZX:
                case OP_31_XOP_LWBRX:
                        regs->gpr[rd] = 0xffffffff;
                        break;

                case OP_31_XOP_LWZUX:
                        regs->gpr[rd] = 0xffffffff;
                        regs->gpr[ra] += regs->gpr[rb];
                        break;

                case OP_31_XOP_LBZX:
                        regs->gpr[rd] = 0xff;
                        break;

                case OP_31_XOP_LBZUX:
                        regs->gpr[rd] = 0xff;
                        regs->gpr[ra] += regs->gpr[rb];
                        break;

                case OP_31_XOP_LHZX:
                case OP_31_XOP_LHBRX:
                        regs->gpr[rd] = 0xffff;
                        break;

                case OP_31_XOP_LHZUX:
                        regs->gpr[rd] = 0xffff;
                        regs->gpr[ra] += regs->gpr[rb];
                        break;

                case OP_31_XOP_LHAX:
                        regs->gpr[rd] = ~0UL;
                        break;

                case OP_31_XOP_LHAUX:
                        regs->gpr[rd] = ~0UL;
                        regs->gpr[ra] += regs->gpr[rb];
                        break;

                default:
                        return 0;
                }
                break;

        case OP_LWZ:
                regs->gpr[rd] = 0xffffffff;
                break;

        case OP_LWZU:
                regs->gpr[rd] = 0xffffffff;
                regs->gpr[ra] += (s16)d;
                break;

        case OP_LBZ:
                regs->gpr[rd] = 0xff;
                break;

        case OP_LBZU:
                regs->gpr[rd] = 0xff;
                regs->gpr[ra] += (s16)d;
                break;

        case OP_LHZ:
                regs->gpr[rd] = 0xffff;
                break;

        case OP_LHZU:
                regs->gpr[rd] = 0xffff;
                regs->gpr[ra] += (s16)d;
                break;

        case OP_LHA:
                regs->gpr[rd] = ~0UL;
                break;

        case OP_LHAU:
                regs->gpr[rd] = ~0UL;
                regs->gpr[ra] += (s16)d;
                break;

        default:
                return 0;
        }

        return 1;
}

static int is_in_pci_mem_space(phys_addr_t addr)
{
        struct pci_controller *hose;
        struct resource *res;
        int i;

        list_for_each_entry(hose, &hose_list, list_node) {
                if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG))
                        continue;

                for (i = 0; i < 3; i++) {
                        res = &hose->mem_resources[i];
                        if ((res->flags & IORESOURCE_MEM) &&
                                addr >= res->start && addr <= res->end)
                                return 1;
                }
        }
        return 0;
}

int fsl_pci_mcheck_exception(struct pt_regs *regs)
{
        u32 inst;
        int ret;
        phys_addr_t addr = 0;

        /* Let KVM/QEMU deal with the exception */
        if (regs->msr & MSR_GS)
                return 0;

#ifdef CONFIG_PHYS_64BIT
        addr = mfspr(SPRN_MCARU);
        addr <<= 32;
#endif
        addr += mfspr(SPRN_MCAR);

        if (is_in_pci_mem_space(addr)) {
                if (user_mode(regs))
                        ret = copy_from_user_nofault(&inst,
                                        (void __user *)regs->nip, sizeof(inst));
                else
                        ret = probe_kernel_address((void *)regs->nip, inst);

                if (!ret && mcheck_handle_load(regs, inst)) {
                        regs->nip += 4;
                        return 1;
                }
        }

        return 0;
}
#endif

#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static const struct of_device_id pci_ids[] = {
        { .compatible = "fsl,mpc8540-pci", },
        { .compatible = "fsl,mpc8548-pcie", },
        { .compatible = "fsl,mpc8610-pci", },
        { .compatible = "fsl,mpc8641-pcie", },
        { .compatible = "fsl,qoriq-pcie", },
        { .compatible = "fsl,qoriq-pcie-v2.1", },
        { .compatible = "fsl,qoriq-pcie-v2.2", },
        { .compatible = "fsl,qoriq-pcie-v2.3", },
        { .compatible = "fsl,qoriq-pcie-v2.4", },
        { .compatible = "fsl,qoriq-pcie-v3.0", },

        /*
         * The following entries are for compatibility with older device
         * trees.
         */
        { .compatible = "fsl,p1022-pcie", },
        { .compatible = "fsl,p4080-pcie", },

        {},
};

struct device_node *fsl_pci_primary;

void fsl_pci_assign_primary(void)
{
        struct device_node *np;

        /* Callers can specify the primary bus using other means. */
        if (fsl_pci_primary)
                return;

        /* If a PCI host bridge contains an ISA node, it's primary. */
        np = of_find_node_by_type(NULL, "isa");
        while ((fsl_pci_primary = of_get_parent(np))) {
                of_node_put(np);
                np = fsl_pci_primary;

                if (of_match_node(pci_ids, np) && of_device_is_available(np))
                        return;
        }

        /*
         * If there's no PCI host bridge with ISA, arbitrarily
         * designate one as primary.  This can go away once
         * various bugs with primary-less systems are fixed.
         */
        for_each_matching_node(np, pci_ids) {
                if (of_device_is_available(np)) {
                        fsl_pci_primary = np;
                        of_node_put(np);
                        return;
                }
        }
}

#ifdef CONFIG_PM_SLEEP
static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id)
{
        struct pci_controller *hose = dev_id;
        struct ccsr_pci __iomem *pci = hose->private_data;
        u32 dr;

        dr = in_be32(&pci->pex_pme_mes_dr);
        if (!dr)
                return IRQ_NONE;

        out_be32(&pci->pex_pme_mes_dr, dr);

        return IRQ_HANDLED;
}

static int fsl_pci_pme_probe(struct pci_controller *hose)
{
        struct ccsr_pci __iomem *pci;
        struct pci_dev *dev;
        int pme_irq;
        int res;
        u16 pms;

        /* Get hose's pci_dev */
        dev = list_first_entry(&hose->bus->devices, typeof(*dev), bus_list);

        /* PME Disable */
        pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms);
        pms &= ~PCI_PM_CTRL_PME_ENABLE;
        pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms);

        pme_irq = irq_of_parse_and_map(hose->dn, 0);
        if (!pme_irq) {
                dev_err(&dev->dev, "Failed to map PME interrupt.\n");

                return -ENXIO;
        }

        res = devm_request_irq(hose->parent, pme_irq,
                        fsl_pci_pme_handle,
                        IRQF_SHARED,
                        "[PCI] PME", hose);
        if (res < 0) {
                dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq);
                irq_dispose_mapping(pme_irq);

                return -ENODEV;
        }

        pci = hose->private_data;

        /* Enable PTOD, ENL23D & EXL23D */
        clrbits32(&pci->pex_pme_mes_disr,
                  PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);

        out_be32(&pci->pex_pme_mes_ier, 0);
        setbits32(&pci->pex_pme_mes_ier,
                  PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D);

        /* PME Enable */
        pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms);
        pms |= PCI_PM_CTRL_PME_ENABLE;
        pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms);

        return 0;
}

static void send_pme_turnoff_message(struct pci_controller *hose)
{
        struct ccsr_pci __iomem *pci = hose->private_data;
        u32 dr;
        int i;

        /* Send PME_Turn_Off Message Request */
        setbits32(&pci->pex_pmcr, PEX_PMCR_PTOMR);

        /* Wait trun off done */
        for (i = 0; i < 150; i++) {
                dr = in_be32(&pci->pex_pme_mes_dr);
                if (dr) {
                        out_be32(&pci->pex_pme_mes_dr, dr);
                        break;
                }

                udelay(1000);
        }
}

static void fsl_pci_syscore_do_suspend(struct pci_controller *hose)
{
        send_pme_turnoff_message(hose);
}

static int fsl_pci_syscore_suspend(void)
{
        struct pci_controller *hose, *tmp;

        list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
                fsl_pci_syscore_do_suspend(hose);

        return 0;
}

static void fsl_pci_syscore_do_resume(struct pci_controller *hose)
{
        struct ccsr_pci __iomem *pci = hose->private_data;
        u32 dr;
        int i;

        /* Send Exit L2 State Message */
        setbits32(&pci->pex_pmcr, PEX_PMCR_EXL2S);

        /* Wait exit done */
        for (i = 0; i < 150; i++) {
                dr = in_be32(&pci->pex_pme_mes_dr);
                if (dr) {
                        out_be32(&pci->pex_pme_mes_dr, dr);
                        break;
                }

                udelay(1000);
        }

        setup_pci_atmu(hose);
}

static void fsl_pci_syscore_resume(void)
{
        struct pci_controller *hose, *tmp;

        list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
                fsl_pci_syscore_do_resume(hose);
}

static struct syscore_ops pci_syscore_pm_ops = {
        .suspend = fsl_pci_syscore_suspend,
        .resume = fsl_pci_syscore_resume,
};
#endif

void fsl_pcibios_fixup_phb(struct pci_controller *phb)
{
#ifdef CONFIG_PM_SLEEP
        fsl_pci_pme_probe(phb);
#endif
}

static int add_err_dev(struct platform_device *pdev)
{
        struct platform_device *errdev;
        struct mpc85xx_edac_pci_plat_data pd = {
                .of_node = pdev->dev.of_node
        };

        errdev = platform_device_register_resndata(&pdev->dev,
                                                   "mpc85xx-pci-edac",
                                                   PLATFORM_DEVID_AUTO,
                                                   pdev->resource,
                                                   pdev->num_resources,
                                                   &pd, sizeof(pd));

        return PTR_ERR_OR_ZERO(errdev);
}

static int fsl_pci_probe(struct platform_device *pdev)
{
        struct device_node *node;
        int ret;

        node = pdev->dev.of_node;
        ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
        if (ret)
                return ret;

        ret = add_err_dev(pdev);
        if (ret)
                dev_err(&pdev->dev, "couldn't register error device: %d\n",
                        ret);

        return 0;
}

static struct platform_driver fsl_pci_driver = {
        .driver = {
                .name = "fsl-pci",
                .of_match_table = pci_ids,
        },
        .probe = fsl_pci_probe,
};

static int __init fsl_pci_init(void)
{
#ifdef CONFIG_PM_SLEEP
        register_syscore_ops(&pci_syscore_pm_ops);
#endif
        return platform_driver_register(&fsl_pci_driver);
}
arch_initcall(fsl_pci_init);
#endif